From: Michal Cieslakiewicz Date: Fri, 2 Aug 2019 15:12:34 +0000 (+0200) Subject: ar71xx: WNR2200: remove redundant GPIO for WLAN LED X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=dddb43775f59271d86ebd724f059aff38517d20b;p=openwrt%2Fstaging%2Fjow.git ar71xx: WNR2200: remove redundant GPIO for WLAN LED Without this patch, an extra entry appears for AR9287 GPIO that duplicates WLAN LED but in fact drives nothing: gpiochip1: GPIOs 502-511, ath9k-phy0: gpio-502 ( |netgear:blue:wlan ) out hi gpio-503 ( |netgear:amber:test ) out hi gpio-504 ( |netgear:green:power ) out lo gpio-505 ( |rfkill ) in hi gpio-507 ( |wps ) in hi gpio-508 ( |reset ) in hi gpio-510 ( |ath9k-phy0 ) out hi <===! The pin pointed above is default LED GPIO (8) for AR9287. For WNR2200 it is not connected anywhere - pin 0 drives blue WLAN LED instead - but initialization code is missing that information. This fix calls ap9x_pci_setup_wmac_led_pin() function at device setup, forcing WLAN LED pin to be 0 and removing redundant entry. Signed-off-by: Michal Cieslakiewicz --- diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2200.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2200.c index 54217220f7..74166c5376 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2200.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2200.c @@ -222,6 +222,7 @@ static void __init wnr2200_setup(void) wnr2200_get_wmac(wlan_mac_addr, WNR2200_MAC0_OFFSET, WNR2200_MAC1_OFFSET, WNR2200_WMAC_OFFSET); + ap9x_pci_setup_wmac_led_pin(0, 0); ap91_pci_init(art + WNR2200_PCIE_CALDATA_OFFSET, wlan_mac_addr); ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2200_leds_gpio),