From: Mithlesh Thukral Date: Mon, 5 Jan 2009 15:45:29 +0000 (+0530) Subject: Staging: sxg: Commenting style fixes - Pending work X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ddd6f0a8c9c2f9b934491b8a52d77af422799ab5;p=openwrt%2Fstaging%2Fblogic.git Staging: sxg: Commenting style fixes - Pending work This patch cleans up the comment. Converts the comments to C89 style. Fixes comment related TODO item. Signed-off-by: LinSysSoft Sahara Team Signed-off-by: Christopher Harrer Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/sxg/sxg.c b/drivers/staging/sxg/sxg.c index 6b5c83488c81..815bfd2365eb 100644 --- a/drivers/staging/sxg/sxg.c +++ b/drivers/staging/sxg/sxg.c @@ -171,12 +171,6 @@ static struct pci_device_id sxg_pci_tbl[] __devinitdata = { MODULE_DEVICE_TABLE(pci, sxg_pci_tbl); -/*********************************************************************** -************************************************************************ -************************************************************************ -************************************************************************ -************************************************************************/ - static inline void sxg_reg32_write(void __iomem *reg, u32 value, bool flush) { writel(value, reg); @@ -278,10 +272,12 @@ static bool sxg_download_microcode(struct adapter_t *adapter, enum SXG_UCODE_SEL /* First, reset the card */ WRITE_REG(HwRegs->Reset, 0xDEAD, FLUSH); - /* Download each section of the microcode as specified in */ - /* its download file. The *download.c file is generated using */ - /* the saharaobjtoc facility which converts the metastep .obj */ - /* file to a .c file which contains a two dimentional array. */ + /* + * Download each section of the microcode as specified in + * its download file. The *download.c file is generated using + * the saharaobjtoc facility which converts the metastep .obj + * file to a .c file which contains a two dimentional array. + */ for (Section = 0; Section < numSections; Section++) { DBG_ERROR("sxg: SECTION # %d\n", Section); switch (UcodeSel) { @@ -309,19 +305,23 @@ static bool sxg_download_microcode(struct adapter_t *adapter, enum SXG_UCODE_SEL /* Write instruction address with the WRITE bit set */ WRITE_REG(HwRegs->UcodeAddr, (Address | MICROCODE_ADDRESS_WRITE), FLUSH); - /* Sahara bug in the ucode download logic - the write to DataLow */ - /* for the next instruction could get corrupted. To avoid this, */ - /* write to DataLow again for this instruction (which may get */ - /* corrupted, but it doesn't matter), then increment the address */ - /* and write the data for the next instruction to DataLow. That */ - /* write should succeed. */ + /* + * Sahara bug in the ucode download logic - the write to DataLow + * for the next instruction could get corrupted. To avoid this, + * write to DataLow again for this instruction (which may get + * corrupted, but it doesn't matter), then increment the address + * and write the data for the next instruction to DataLow. That + * write should succeed. + */ WRITE_REG(HwRegs->UcodeDataLow, *Instruction, TRUE); /* Advance 3 u32S to start of next instruction */ Instruction += 3; } } - /* Now repeat the entire operation reading the instruction back and */ - /* checking for parity errors */ + /* + * Now repeat the entire operation reading the instruction back and + * checking for parity errors + */ for (Section = 0; Section < numSections; Section++) { DBG_ERROR("sxg: check SECTION # %d\n", Section); switch (UcodeSel) { @@ -376,8 +376,10 @@ static bool sxg_download_microcode(struct adapter_t *adapter, enum SXG_UCODE_SEL /* Everything OK, Go. */ WRITE_REG(HwRegs->UcodeAddr, MICROCODE_ADDRESS_GO, FLUSH); - /* Poll the CardUp register to wait for microcode to initialize */ - /* Give up after 10,000 attemps (500ms). */ + /* + * Poll the CardUp register to wait for microcode to initialize + * Give up after 10,000 attemps (500ms). + */ for (i = 0; i < 10000; i++) { udelay(50); READ_REG(adapter->UcodeRegs[0].CardUp, ValueRead); @@ -391,9 +393,11 @@ static bool sxg_download_microcode(struct adapter_t *adapter, enum SXG_UCODE_SEL return (FALSE); /* Timeout */ } - /* Now write the LoadSync register. This is used to */ - /* synchronize with the card so it can scribble on the memory */ - /* that contained 0xCAFE from the "CardUp" step above */ + /* + * Now write the LoadSync register. This is used to + * synchronize with the card so it can scribble on the memory + * that contained 0xCAFE from the "CardUp" step above + */ if (UcodeSel == SXG_UCODE_SAHARA) { WRITE_REG(adapter->UcodeRegs[0].LoadSync, 0, FLUSH); } @@ -449,21 +453,27 @@ static int sxg_allocate_resources(struct adapter_t *adapter) InitializeListHead(&adapter->FreeSglBuffers); InitializeListHead(&adapter->AllSglBuffers); - /* Mark these basic allocations done. This flags essentially */ - /* tells the SxgFreeResources routine that it can grab spinlocks */ - /* and reference listheads. */ + /* + * Mark these basic allocations done. This flags essentially + * tells the SxgFreeResources routine that it can grab spinlocks + * and reference listheads. + */ adapter->BasicAllocations = TRUE; - /* Main allocation loop. Start with the maximum supported by */ - /* the microcode and back off if memory allocation */ - /* fails. If we hit a minimum, fail. */ + /* + * Main allocation loop. Start with the maximum supported by + * the microcode and back off if memory allocation + * fails. If we hit a minimum, fail. + */ for (;;) { DBG_ERROR("%s Allocate XmtRings size[%x]\n", __func__, (unsigned int)(sizeof(struct sxg_xmt_ring) * 1)); - /* Start with big items first - receive and transmit rings. At the moment */ - /* I'm going to keep the ring size fixed and adjust the number of */ - /* TCBs if we fail. Later we might consider reducing the ring size as well.. */ + /* + * Start with big items first - receive and transmit rings. At the moment + * I'm going to keep the ring size fixed and adjust the + * TCBs if we fail. Later we might consider reducing the ring size as well.. + */ adapter->XmtRings = pci_alloc_consistent(adapter->pcidev, sizeof(struct sxg_xmt_ring) * 1, @@ -518,8 +528,10 @@ static int sxg_allocate_resources(struct adapter_t *adapter) ASSERT(sizeof(struct sxg_rcv_descriptor_block) == SXG_RCV_DESCRIPTOR_BLOCK_SIZE); - /* Allocate receive data buffers. We allocate a block of buffers and */ - /* a corresponding descriptor block at once. See sxghw.h:SXG_RCV_BLOCK */ + /* + * Allocate receive data buffers. We allocate a block of buffers and + * a corresponding descriptor block at once. See sxghw.h:SXG_RCV_BLOCK + */ for (i = 0; i < SXG_INITIAL_RCV_DATA_BUFFERS; i += SXG_RCV_DESCRIPTORS_PER_BLOCK) { sxg_allocate_buffer_memory(adapter, @@ -527,8 +539,10 @@ static int sxg_allocate_resources(struct adapter_t *adapter) ReceiveBufferSize), SXG_BUFFER_TYPE_RCV); } - /* NBL resource allocation can fail in the 'AllocateComplete' routine, which */ - /* doesn't return status. Make sure we got the number of buffers we requested */ + /* + * NBL resource allocation can fail in the 'AllocateComplete' routine, which + * doesn't return status. Make sure we got the number of buffers we requested + */ if (adapter->FreeRcvBufferCount < SXG_INITIAL_RCV_DATA_BUFFERS) { SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XAResF6", adapter, adapter->FreeRcvBufferCount, SXG_MAX_ENTRIES, @@ -597,7 +611,6 @@ static int sxg_allocate_resources(struct adapter_t *adapter) * * Arguments - * pcidev - A pointer to our adapter structure - * */ static void sxg_config_pci(struct pci_dev *pcidev) { @@ -628,7 +641,7 @@ static unsigned char temp_mac_address[6] = { 0x00, 0xab, 0xcd, 0xef, 0x12, 0x69 */ static inline int sxg_read_config(struct adapter_t *adapter) { - //struct sxg_config data; + /* struct sxg_config data; */ struct sw_cfg_data *data; dma_addr_t p_addr; unsigned long status; @@ -636,7 +649,8 @@ static inline int sxg_read_config(struct adapter_t *adapter) data = pci_alloc_consistent(adapter->pcidev, sizeof(struct sw_cfg_data), &p_addr); if(!data) { - /* We cant get even this much memory. Raise a hell + /* + * We cant get even this much memory. Raise a hell * Get out of here */ printk(KERN_ERR"%s : Could not allocate memory for reading EEPROM\n", __FUNCTION__); @@ -797,8 +811,10 @@ static int sxg_entry_probe(struct pci_dev *pcidev, adapter->UcodeRegs = (void *)memmapped_ioaddr; adapter->State = SXG_STATE_INITIALIZING; - /* Maintain a list of all adapters anchored by */ - /* the global SxgDriver structure. */ + /* + * Maintain a list of all adapters anchored by + * the global SxgDriver structure. + */ adapter->Next = SxgDriver.Adapters; SxgDriver.Adapters = adapter; adapter->AdapterID = ++SxgDriver.AdapterID; @@ -816,10 +832,12 @@ static int sxg_entry_probe(struct pci_dev *pcidev, adapter->ReceiveBufferSize = SXG_RCV_DATA_BUFFER_SIZE; } -/* status = SXG_READ_EEPROM(adapter); */ -/* if (!status) { */ -/* goto sxg_init_bad; */ -/* } */ +/* + * status = SXG_READ_EEPROM(adapter); + * if (!status) { + * goto sxg_init_bad; + * } + */ DBG_ERROR("sxg: %s ENTER sxg_config_pci\n", __func__); sxg_config_pci(pcidev); @@ -911,10 +929,8 @@ static int sxg_entry_probe(struct pci_dev *pcidev, return -ENODEV; } -/*********************************************************************** - * LINE BASE Interrupt routines.. - ***********************************************************************/ /* + * LINE BASE Interrupt routines.. * * sxg_disable_interrupt * @@ -934,9 +950,7 @@ static void sxg_disable_interrupt(struct adapter_t *adapter) /* For now, RSS is disabled with line based interrupts */ ASSERT(adapter->RssEnabled == FALSE); ASSERT(adapter->MsiEnabled == FALSE); - /* */ /* Turn off interrupts by writing to the icr register. */ - /* */ WRITE_REG(adapter->UcodeRegs[0].Icr, SXG_ICR(0, SXG_ICR_DISABLE), TRUE); adapter->InterruptsEnabled = 0; @@ -946,7 +960,6 @@ static void sxg_disable_interrupt(struct adapter_t *adapter) } /* - * * sxg_enable_interrupt * * EnableInterrupt Handler @@ -965,9 +978,7 @@ static void sxg_enable_interrupt(struct adapter_t *adapter) /* For now, RSS is disabled with line based interrupts */ ASSERT(adapter->RssEnabled == FALSE); ASSERT(adapter->MsiEnabled == FALSE); - /* */ /* Turn on interrupts by writing to the icr register. */ - /* */ WRITE_REG(adapter->UcodeRegs[0].Icr, SXG_ICR(0, SXG_ICR_ENABLE), TRUE); adapter->InterruptsEnabled = 1; @@ -977,7 +988,6 @@ static void sxg_enable_interrupt(struct adapter_t *adapter) } /* - * * sxg_isr - Process an line-based interrupt * * Arguments: @@ -996,25 +1006,29 @@ static irqreturn_t sxg_isr(int irq, void *dev_id) adapter->Stats.NumInts++; if (adapter->Isr[0] == 0) { - /* The SLIC driver used to experience a number of spurious interrupts */ - /* due to the delay associated with the masking of the interrupt */ - /* (we'd bounce back in here). If we see that again with Sahara, */ - /* add a READ_REG of the Icr register after the WRITE_REG below. */ + /* + * The SLIC driver used to experience a number of spurious + * interrupts due to the delay associated with the masking of + * the interrupt (we'd bounce back in here). If we see that + * again with Sahara,add a READ_REG of the Icr register after + * the WRITE_REG below. + */ adapter->Stats.FalseInts++; return IRQ_NONE; } - /* */ - /* Move the Isr contents and clear the value in */ - /* shared memory, and mask interrupts */ - /* */ + /* + * Move the Isr contents and clear the value in + * shared memory, and mask interrupts + */ adapter->IsrCopy[0] = adapter->Isr[0]; adapter->Isr[0] = 0; WRITE_REG(adapter->UcodeRegs[0].Icr, SXG_ICR(0, SXG_ICR_MASK), TRUE); /* ASSERT(adapter->IsrDpcsPending == 0); */ #if XXXTODO /* RSS Stuff */ - /* If RSS is enabled and the ISR specifies */ - /* SXG_ISR_EVENT, then schedule DPC's */ - /* based on event queues. */ + /* + * If RSS is enabled and the ISR specifies SXG_ISR_EVENT, then + * schedule DPC's based on event queues. + */ if (adapter->RssEnabled && (adapter->IsrCopy[0] & SXG_ISR_EVENT)) { for (i = 0; i < adapter->RssSystemInfo->ProcessorInfo.RssCpuCount; @@ -1030,8 +1044,9 @@ static irqreturn_t sxg_isr(int irq, void *dev_id) } } } - /* Now, either schedule the CPUs specified by the CpuMask, */ - /* or queue default */ + /* Now, either schedule the CPUs specified by the CpuMask, + * or queue default + */ if (CpuMask) { *QueueDefault = FALSE; } else { @@ -1040,9 +1055,7 @@ static irqreturn_t sxg_isr(int irq, void *dev_id) } *TargetCpus = CpuMask; #endif - /* */ /* There are no DPCs in Linux, so call the handler now */ - /* */ sxg_handle_interrupt(adapter); return IRQ_HANDLED; @@ -1065,7 +1078,6 @@ static void sxg_handle_interrupt(struct adapter_t *adapter) ASSERT(adapter->RssEnabled == FALSE); ASSERT(adapter->MsiEnabled == FALSE); ASSERT(adapter->IsrCopy[0]); -/*/////////////////////////// */ /* Always process the event queue. */ sxg_process_event_queue(adapter, @@ -1080,13 +1092,9 @@ static void sxg_handle_interrupt(struct adapter_t *adapter) return; } #endif - /* */ /* Last (or only) DPC processes the ISR and clears the interrupt. */ - /* */ NewIsr = sxg_process_isr(adapter, 0); - /* */ /* Reenable interrupts */ - /* */ adapter->IsrCopy[0] = 0; SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "ClearIsr", adapter, NewIsr, 0, 0); @@ -1103,7 +1111,6 @@ static void sxg_handle_interrupt(struct adapter_t *adapter) } /* - * * sxg_process_isr - Process an interrupt. Called from the line-based and * message based interrupt DPC routines * @@ -1122,6 +1129,7 @@ static int sxg_process_isr(struct adapter_t *adapter, u32 MessageId) SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "ProcIsr", adapter, Isr, 0, 0); + DBG_ERROR("%s: Entering with %d ISR value\n", __FUNCTION__, Isr); /* Error */ if (Isr & SXG_ISR_ERR) { if (Isr & SXG_ISR_PDQF) { @@ -1130,12 +1138,14 @@ static int sxg_process_isr(struct adapter_t *adapter, u32 MessageId) } /* No host buffer */ if (Isr & SXG_ISR_RMISS) { - /* There is a bunch of code in the SLIC driver which */ - /* attempts to process more receive events per DPC */ - /* if we start to fall behind. We'll probably */ - /* need to do something similar here, but hold */ - /* off for now. I don't want to make the code more */ - /* complicated than strictly needed. */ + /* + * There is a bunch of code in the SLIC driver which + * attempts to process more receive events per DPC + * if we start to fall behind. We'll probablyd + * need to do something similar here, but hold + * off for now. I don't want to make the code more + * complicated than strictly needed. + */ adapter->Stats.RcvNoBuffer++; if (adapter->Stats.RcvNoBuffer < 5) { DBG_ERROR("%s: SXG_ISR_ERR RMISS!!\n", @@ -1155,10 +1165,12 @@ static int sxg_process_isr(struct adapter_t *adapter, u32 MessageId) } /* Event ring full */ if (Isr & SXG_ISR_ERFULL) { - /* Same issue as RMISS, really. This means the */ - /* host is falling behind the card. Need to increase */ - /* event ring size, process more events per interrupt, */ - /* and/or reduce/remove interrupt aggregation. */ + /* + * Same issue as RMISS, really. This means the + * host is falling behind the card. Need to increase + * event ring size, process more events per interrupt, + * and/or reduce/remove interrupt aggregation. + */ adapter->Stats.EventRingFull++; DBG_ERROR("%s: SXG_ISR_ERR EVENT RING FULL!!\n", __func__); @@ -1185,9 +1197,11 @@ static int sxg_process_isr(struct adapter_t *adapter, u32 MessageId) } /* Debug - breakpoint hit */ if (Isr & SXG_ISR_BREAK) { - /* At the moment AGDB isn't written to support interactive */ - /* debug sessions. When it is, this interrupt will be used */ - /* to signal AGDB that it has hit a breakpoint. For now, ASSERT. */ + /* + * At the moment AGDB isn't written to support interactive + * debug sessions. When it is, this interrupt will be used + * to signal AGDB that it has hit a breakpoint. For now, ASSERT. + */ ASSERT(0); } /* Heartbeat response */ @@ -1201,7 +1215,6 @@ static int sxg_process_isr(struct adapter_t *adapter, u32 MessageId) } /* - * * sxg_process_event_queue - Process our event queue * * Arguments: @@ -1230,14 +1243,18 @@ static u32 sxg_process_event_queue(struct adapter_t *adapter, u32 RssId) (adapter->State == SXG_STATE_PAUSING) || (adapter->State == SXG_STATE_PAUSED) || (adapter->State == SXG_STATE_HALTING)); - /* We may still have unprocessed events on the queue if */ - /* the card crashed. Don't process them. */ + /* + * We may still have unprocessed events on the queue if + * the card crashed. Don't process them. + */ if (adapter->Dead) { return (0); } - /* In theory there should only be a single processor that */ - /* accesses this queue, and only at interrupt-DPC time. So */ - /* we shouldn't need a lock for any of this. */ + /* + * In theory there should only be a single processor that + * accesses this queue, and only at interrupt-DPC time. So/ + * we shouldn't need a lock for any of this. + */ while (Event->Status & EVENT_STATUS_VALID) { SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "Event", Event, Event->Code, Event->Status, @@ -1245,10 +1262,8 @@ static u32 sxg_process_event_queue(struct adapter_t *adapter, u32 RssId) switch (Event->Code) { case EVENT_CODE_BUFFERS: ASSERT(!(Event->CommandIndex & 0xFF00)); /* struct sxg_ring_info Head & Tail == unsigned char */ - /* */ sxg_complete_descriptor_blocks(adapter, Event->CommandIndex); - /* */ break; case EVENT_CODE_SLOWRCV: --adapter->RcvBuffersOnCard; @@ -1258,8 +1273,11 @@ static u32 sxg_process_event_queue(struct adapter_t *adapter, u32 RssId) /* Add it to our indication list */ SXG_ADD_RCV_PACKET(adapter, skb, prev_skb, IndicationList, num_skbs); - /* In Linux, we just pass up each skb to the protocol above at this point, */ - /* there is no capability of an indication list. */ + /* + * Linux, we just pass up each skb to the + * protocol above at this point, there is no + * capability of an indication list. + */ #else /* CHECK skb_pull(skb, INIC_RCVBUF_HEADSIZE); */ rx_bytes = Event->Length; /* (rcvbuf->length & IRHDDR_FLEN_MSK); */ @@ -1278,29 +1296,36 @@ static u32 sxg_process_event_queue(struct adapter_t *adapter, u32 RssId) __func__, Event->Code); /* ASSERT(0); */ } - /* See if we need to restock card receive buffers. */ - /* There are two things to note here: */ - /* First - This test is not SMP safe. The */ - /* adapter->BuffersOnCard field is protected via atomic interlocked calls, but */ - /* we do not protect it with respect to these tests. The only way to do that */ - /* is with a lock, and I don't want to grab a lock every time we adjust the */ - /* BuffersOnCard count. Instead, we allow the buffer replenishment to be off */ - /* once in a while. The worst that can happen is the card is given one */ - /* more-or-less descriptor block than the arbitrary value we've chosen. */ - /* No big deal */ - /* In short DO NOT ADD A LOCK HERE, OR WHERE RcvBuffersOnCard is adjusted. */ - /* Second - We expect this test to rarely evaluate to true. We attempt to */ - /* refill descriptor blocks as they are returned to us */ - /* (sxg_complete_descriptor_blocks), so The only time this should evaluate */ - /* to true is when sxg_complete_descriptor_blocks failed to allocate */ - /* receive buffers. */ + /* + * See if we need to restock card receive buffers. + * There are two things to note here: + * First - This test is not SMP safe. The + * adapter->BuffersOnCard field is protected via atomic + * interlocked calls, but we do not protect it with respect + * to these tests. The only way to do that is with a lock, + * and I don't want to grab a lock every time we adjust the + * BuffersOnCard count. Instead, we allow the buffer + * replenishment to be off once in a while. The worst that + * can happen is the card is given on more-or-less descriptor + * block than the arbitrary value we've chosen. No big deal + * In short DO NOT ADD A LOCK HERE, OR WHERE RcvBuffersOnCard + * is adjusted. + * Second - We expect this test to rarely + * evaluate to true. We attempt to refill descriptor blocks + * as they are returned to us (sxg_complete_descriptor_blocks) + * so The only time this should evaluate to true is when + * sxg_complete_descriptor_blocks failed to allocate + * receive buffers. + */ if (adapter->RcvBuffersOnCard < SXG_RCV_DATA_BUFFERS) { sxg_stock_rcv_buffers(adapter); } - /* It's more efficient to just set this to zero. */ - /* But clearing the top bit saves potential debug info... */ + /* + * It's more efficient to just set this to zero. + * But clearing the top bit saves potential debug info... + */ Event->Status &= ~EVENT_STATUS_VALID; - /* Advanct to the next event */ + /* Advance to the next event */ SXG_ADVANCE_INDEX(adapter->NextEvent[RssId], EVENT_RING_SIZE); Event = &EventRing->Ring[adapter->NextEvent[RssId]]; EventsProcessed++; @@ -1309,9 +1334,11 @@ static u32 sxg_process_event_queue(struct adapter_t *adapter, u32 RssId) WRITE_REG(adapter->UcodeRegs[RssId].EventRelease, EVENT_RING_BATCH, FALSE); EventsProcessed = 0; - /* If we've processed our batch limit, break out of the */ - /* loop and return SXG_ISR_EVENT to arrange for us to */ - /* be called again */ + /* + * If we've processed our batch limit, break out of the + * loop and return SXG_ISR_EVENT to arrange for us to + * be called again + */ if (Batches++ == EVENT_BATCH_LIMIT) { SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "EvtLimit", Batches, @@ -1322,14 +1349,10 @@ static u32 sxg_process_event_queue(struct adapter_t *adapter, u32 RssId) } } #ifdef LINUX_HANDLES_RCV_INDICATION_LISTS - /* */ /* Indicate any received dumb-nic frames */ - /* */ SXG_INDICATE_PACKETS(adapter, IndicationList, num_skbs); #endif - /* */ /* Release events back to the card. */ - /* */ if (EventsProcessed) { WRITE_REG(adapter->UcodeRegs[RssId].EventRelease, EventsProcessed, FALSE); @@ -1356,16 +1379,20 @@ static void sxg_complete_slow_send(struct adapter_t *adapter) u32 *ContextType; struct sxg_cmd *XmtCmd; - /* NOTE - This lock is dropped and regrabbed in this loop. */ - /* This means two different processors can both be running */ - /* through this loop. Be *very* careful. */ + /* + * NOTE - This lock is dropped and regrabbed in this loop. + * This means two different processors can both be running/ + * through this loop. Be *very* careful. + */ spin_lock(&adapter->XmtZeroLock); SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "CmpSnds", adapter, XmtRingInfo->Head, XmtRingInfo->Tail, 0); while (XmtRingInfo->Tail != *adapter->XmtRingZeroIndex) { - /* Locate the current Cmd (ring descriptor entry), and */ - /* associated SGL, and advance the tail */ + /* + * Locate the current Cmd (ring descriptor entry), and + * associated SGL, and advance the tail + */ SXG_RETURN_CMD(XmtRing, XmtRingInfo, XmtCmd, ContextType); ASSERT(ContextType); SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "CmpSnd", @@ -1390,10 +1417,12 @@ static void sxg_complete_slow_send(struct adapter_t *adapter) ASSERT(adapter->Stats.XmtQLen); adapter->Stats.XmtQLen--; /* within XmtZeroLock */ adapter->Stats.XmtOk++; - /* Now drop the lock and complete the send back to */ - /* Microsoft. We need to drop the lock because */ - /* Microsoft can come back with a chimney send, which */ - /* results in a double trip in SxgTcpOuput */ + /* + * Now drop the lock and complete the send back to + * Microsoft. We need to drop the lock because + * Microsoft can come back with a chimney send, which + * results in a double trip in SxgTcpOuput + */ spin_unlock(&adapter->XmtZeroLock); SXG_COMPLETE_DUMB_SEND(adapter, skb); /* and reacquire.. */ @@ -1452,7 +1481,7 @@ static struct sk_buff *sxg_slow_receive(struct adapter_t *adapter, struct sxg_ev for (i = 0; i < 32; i++) dptr += sprintf(dptr, "%02x ", (unsigned)data[i]); printk("ASK:sxg_slow_receive: data %s\n", dstr); - //memcpy(SXG_RECEIVE_DATA_LOCATION(RcvDataBufferHdr), RcvDataBufferHdr->VirtualAddress, Event->Length); + /* memcpy(SXG_RECEIVE_DATA_LOCATION(RcvDataBufferHdr), RcvDataBufferHdr->VirtualAddress, Event->Length);*/ /* Change buffer state to UPSTREAM */ RcvDataBufferHdr->State = SXG_BUFFER_UPSTREAM; @@ -1481,17 +1510,18 @@ static struct sk_buff *sxg_slow_receive(struct adapter_t *adapter, struct sxg_ev } } #endif - /* */ /* Dumb-nic frame. See if it passes our mac filter and update stats */ - /* */ - /* ASK if (!sxg_mac_filter(adapter, - SXG_RECEIVE_DATA_LOCATION(RcvDataBufferHdr), - Event->Length)) { - SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "RcvFiltr", - Event, SXG_RECEIVE_DATA_LOCATION(RcvDataBufferHdr), - Event->Length, 0); - goto drop; - } */ + + /* + * ASK if (!sxg_mac_filter(adapter, + * SXG_RECEIVE_DATA_LOCATION(RcvDataBufferHdr), + * Event->Length)) { + * SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "RcvFiltr", + * Event, SXG_RECEIVE_DATA_LOCATION(RcvDataBufferHdr), + * Event->Length, 0); + * goto drop; + * } + */ Packet = RcvDataBufferHdr->SxgDumbRcvPacket; SXG_ADJUST_RCV_PACKET(Packet, RcvDataBufferHdr, Event); @@ -1500,9 +1530,7 @@ static struct sk_buff *sxg_slow_receive(struct adapter_t *adapter, struct sxg_ev SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_IMPORTANT, "DumbRcv", RcvDataBufferHdr, Packet, Event->Length, 0); - /* */ /* Lastly adjust the receive packet length. */ - /* */ RcvDataBufferHdr->SxgDumbRcvPacket = NULL; SXG_FREE_RCV_DATA_BUFFER(adapter, RcvDataBufferHdr); @@ -1654,9 +1682,11 @@ static bool sxg_mac_filter(struct adapter_t *adapter, struct ether_header *Ether } } } else if (adapter->MacFilter & MAC_DIRECTED) { - /* Not broadcast or multicast. Must be directed at us or */ - /* the card is in promiscuous mode. Either way, consider it */ - /* ours if MAC_DIRECTED is set */ + /* + * Not broadcast or multicast. Must be directed at us or + * the card is in promiscuous mode. Either way, consider it + * ours if MAC_DIRECTED is set + */ adapter->Stats.DumbRcvUcastPkts++; adapter->Stats.DumbRcvUcastBytes += length; adapter->Stats.DumbRcvPkts++; @@ -1784,9 +1814,7 @@ static int sxg_if_init(struct adapter_t *adapter) adapter->state = ADAPT_UP; - /* - * clear any pending events, then enable interrupts - */ + /* clear any pending events, then enable interrupts */ DBG_ERROR("sxg: %s ENABLE interrupts(slic)\n", __func__); return (STATUS_SUCCESS); @@ -1929,7 +1957,6 @@ static int sxg_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) #define NORMAL_ETHFRAME 0 /* - * * sxg_send_packets - Send a skb packet * * Arguments: @@ -1944,8 +1971,10 @@ static int sxg_send_packets(struct sk_buff *skb, struct net_device *dev) struct adapter_t *adapter = (struct adapter_t *) netdev_priv(dev); u32 status = STATUS_SUCCESS; - //DBG_ERROR("sxg: %s ENTER sxg_send_packets skb[%p]\n", __FUNCTION__, - // skb); + /* + * DBG_ERROR("sxg: %s ENTER sxg_send_packets skb[%p]\n", __FUNCTION__, + * skb); + */ printk("ASK:sxg_send_packets: skb[%p]\n", skb); /* Check the adapter state */ @@ -2016,8 +2045,10 @@ static int sxg_transmit_packet(struct adapter_t *adapter, struct sk_buff *skb) void *SglBuffer; u32 SglBufferLength; - /* The vast majority of work is done in the shared */ - /* sxg_dumb_sgl routine. */ + /* + * The vast majority of work is done in the shared + * sxg_dumb_sgl routine. + */ SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DumbSend", adapter, skb, 0, 0); @@ -2089,8 +2120,10 @@ static void sxg_dumb_sgl(struct sxg_x64_sgl *pSgl, struct sxg_scatter_gather *Sx ASSERT(SxgSgl->VlanTag.VlanTci == 0); ASSERT(SxgSgl->VlanTag.VlanTpid == 0); - /* From here below we work with the SGL placed in our */ - /* buffer. */ + /* + * From here below we work with the SGL placed in our + * buffer. + */ SxgSgl->Sgl.NumberOfElements = 1; @@ -2098,8 +2131,10 @@ static void sxg_dumb_sgl(struct sxg_x64_sgl *pSgl, struct sxg_scatter_gather *Sx spin_lock(&adapter->XmtZeroLock); SXG_GET_CMD(XmtRing, XmtRingInfo, XmtCmd, SxgSgl); if (XmtCmd == NULL) { - /* Call sxg_complete_slow_send to see if we can */ - /* free up any XmtRingZero entries and then try again */ + /* + * Call sxg_complete_slow_send to see if we can + * free up any XmtRingZero entries and then try again + */ spin_unlock(&adapter->XmtZeroLock); sxg_complete_slow_send(adapter); spin_lock(&adapter->XmtZeroLock); @@ -2128,8 +2163,10 @@ static void sxg_dumb_sgl(struct sxg_x64_sgl *pSgl, struct sxg_scatter_gather *Sx adapter->Stats.DumbXmtUcastBytes += DataLength; } #endif - /* Fill in the command */ - /* Copy out the first SGE to the command and adjust for offset */ + /* + * Fill in the command + * Copy out the first SGE to the command and adjust for offset + */ phys_addr = pci_map_single(adapter->pcidev, skb->data, skb->len, PCI_DMA_TODEVICE); @@ -2141,16 +2178,13 @@ static void sxg_dumb_sgl(struct sxg_x64_sgl *pSgl, struct sxg_scatter_gather *Sx XmtCmd->SgEntries = 1; XmtCmd->Flags = 0; printk("ASK:sxg_dumb_sgl: wrote to xmit register\n"); - /* */ - /* Advance transmit cmd descripter by 1. */ - /* NOTE - See comments in SxgTcpOutput where we write */ - /* to the XmtCmd register regarding CPU ID values and/or */ - /* multiple commands. */ - /* */ - /* */ + /* + * Advance transmit cmd descripter by 1. + * NOTE - See comments in SxgTcpOutput where we write + * to the XmtCmd register regarding CPU ID values and/or + * multiple commands. + */ WRITE_REG(adapter->UcodeRegs[0].XmtCmd, 1, TRUE); - /* */ - /* */ adapter->Stats.XmtQLen++; /* Stats within lock */ spin_unlock(&adapter->XmtZeroLock); SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XDumSgl2", @@ -2158,17 +2192,21 @@ static void sxg_dumb_sgl(struct sxg_x64_sgl *pSgl, struct sxg_scatter_gather *Sx return; abortcmd: - /* NOTE - Only jump to this label AFTER grabbing the */ - /* XmtZeroLock, and DO NOT DROP IT between the */ - /* command allocation and the following abort. */ + /* + * NOTE - Only jump to this label AFTER grabbing the + * XmtZeroLock, and DO NOT DROP IT between the + * command allocation and the following abort. + */ if (XmtCmd) { SXG_ABORT_CMD(XmtRingInfo); } spin_unlock(&adapter->XmtZeroLock); -/* failsgl: */ - /* Jump to this label if failure occurs before the */ - /* XmtZeroLock is grabbed */ +/* + * failsgl: + * Jump to this label if failure occurs before the + * XmtZeroLock is grabbed + */ adapter->Stats.XmtErrors++; SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_IMPORTANT, "DumSGFal", pSgl, SxgSgl, XmtRingInfo->Head, XmtRingInfo->Tail); @@ -2176,11 +2214,9 @@ static void sxg_dumb_sgl(struct sxg_x64_sgl *pSgl, struct sxg_scatter_gather *Sx SXG_COMPLETE_DUMB_SEND(adapter, SxgSgl->DumbPacket); /* SxgSgl->DumbPacket is the skb */ } -/*************************************************************** - * Link management functions - ***************************************************************/ - /* + * Link management functions + * * sxg_initialize_link - Initialize the link stuff * * Arguments - @@ -2212,10 +2248,12 @@ static int sxg_initialize_link(struct adapter_t *adapter) /* Reset all MAC modules */ WRITE_REG(HwRegs->MacConfig0, AXGMAC_CFG0_SUB_RESET, TRUE); - /* Link address 0 */ - /* XXXTODO - This assumes the MAC address (0a:0b:0c:0d:0e:0f) */ - /* is stored with the first nibble (0a) in the byte 0 */ - /* of the Mac address. Possibly reverse? */ + /* + * Link address 0 + * XXXTODO - This assumes the MAC address (0a:0b:0c:0d:0e:0f) + * is stored with the first nibble (0a) in the byte 0 + * of the Mac address. Possibly reverse? + */ Value = *(u32 *) adapter->macaddr; WRITE_REG(HwRegs->LinkAddress0Low, Value, TRUE); /* also write the MAC address to the MAC. Endian is reversed. */ @@ -2253,16 +2291,18 @@ static int sxg_initialize_link(struct adapter_t *adapter) if (adapter->JumboEnabled) { WRITE_REG(HwRegs->MacMaxFrameLen, AXGMAC_MAXFRAME_JUMBO, TRUE); } - /* AMIIM Configuration Register - */ - /* The value placed in the AXGMAC_AMIIM_CFG_HALF_CLOCK portion */ - /* (bottom bits) of this register is used to determine the */ - /* MDC frequency as specified in the A-XGMAC Design Document. */ - /* This value must not be zero. The following value (62 or 0x3E) */ - /* is based on our MAC transmit clock frequency (MTCLK) of 312.5 MHz. */ - /* Given a maximum MDIO clock frequency of 2.5 MHz (see the PHY spec), */ - /* we get: 312.5/(2*(X+1)) < 2.5 ==> X = 62. */ - /* This value happens to be the default value for this register, */ - /* so we really don't have to do this. */ + /* + * AMIIM Configuration Register - + * The value placed in the AXGMAC_AMIIM_CFG_HALF_CLOCK portion + * (bottom bits) of this register is used to determine the MDC frequency + * as specified in the A-XGMAC Design Document. This value must not be + * zero. The following value (62 or 0x3E) is based on our MAC transmit + * clock frequency (MTCLK) of 312.5 MHz. Given a maximum MDIO clock + * frequency of 2.5 MHz (see the PHY spec), we get: + * 312.5/(2*(X+1)) < 2.5 ==> X = 62. + * This value happens to be the default value for this register, so we + * really don't have to do this. + */ WRITE_REG(HwRegs->MacAmiimConfig, 0x0000003E, TRUE); /* Power up and enable PHY and XAUI/XGXS/Serdes logic */ @@ -2272,8 +2312,10 @@ static int sxg_initialize_link(struct adapter_t *adapter) LS_XGXS_CTL | LS_PHY_CLK_EN | LS_ATTN_ALARM), TRUE); DBG_ERROR("After Power Up and enable PHY in sxg_initialize_link\n"); - /* Per information given by Aeluros, wait 100 ms after removing reset. */ - /* It's not enough to wait for the self-clearing reset bit in reg 0 to clear. */ + /* + * Per information given by Aeluros, wait 100 ms after removing reset. + * It's not enough to wait for the self-clearing reset bit in reg 0 to clear. + */ mdelay(100); /* Verify the PHY has come up by checking that the Reset bit has cleared. */ @@ -2409,8 +2451,10 @@ static void sxg_link_event(struct adapter_t *adapter) /* Check the Link Status register. We should have a Link Alarm. */ READ_REG(HwRegs->LinkStatus, Value); if (Value & LS_LINK_ALARM) { - /* We got a Link Status alarm. First, pause to let the */ - /* link state settle (it can bounce a number of times) */ + /* + * We got a Link Status alarm. First, pause to let the + * link state settle (it can bounce a number of times) + */ mdelay(10); /* Now clear the alarm by reading the LASI status register. */ @@ -2430,11 +2474,13 @@ static void sxg_link_event(struct adapter_t *adapter) DBG_ERROR("SXG: Link Alarm occurred. Link is %s\n", ((LinkState == SXG_LINK_UP) ? "UP" : "DOWN")); } else { - /* XXXTODO - Assuming Link Attention is only being generated for the */ - /* Link Alarm pin (and not for a XAUI Link Status change), then it's */ - /* impossible to get here. Yet we've gotten here twice (under extreme */ - /* conditions - bouncing the link up and down many times a second). */ - /* Needs further investigation. */ + /* + * XXXTODO - Assuming Link Attention is only being generated + * for the Link Alarm pin (and not for a XAUI Link Status change) + * , then it's impossible to get here. Yet we've gotten here + * twice (under extreme conditions - bouncing the link up and + * down many times a second). Needs further investigation. + */ DBG_ERROR("SXG: sxg_link_event: Can't get here!\n"); DBG_ERROR("SXG: Link Status == 0x%08X.\n", Value); /* ASSERT(0); */ @@ -2462,8 +2508,10 @@ static enum SXG_LINK_STATE sxg_get_link_state(struct adapter_t *adapter) SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "GetLink", adapter, 0, 0, 0); - /* Per the Xenpak spec (and the IEEE 10Gb spec?), the link is up if */ - /* the following 3 bits (from 3 different MDIO registers) are all true. */ + /* + * Per the Xenpak spec (and the IEEE 10Gb spec?), the link is up if + * the following 3 bits (from 3 different MDIO registers) are all true. + */ status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA, /* PHY PMA/PMD module */ PHY_PMA_RCV_DET, /* PMA/PMD Receive Signal Detect register */ &Value); @@ -2540,8 +2588,10 @@ static void sxg_link_state(struct adapter_t *adapter, enum SXG_LINK_STATE LinkSt DBG_ERROR("ENTER %s\n", __func__); - /* Hold the adapter lock during this routine. Maybe move */ - /* the lock to the caller. */ + /* + * Hold the adapter lock during this routine. Maybe move + * the lock to the caller. + */ spin_lock(&adapter->AdapterLock); if (LinkState == adapter->LinkState) { /* Nothing changed.. */ @@ -2753,7 +2803,6 @@ static int sxg_read_mdio_reg(struct adapter_t *adapter, * * After the CRC for the 6 bytes is generated (but before the value is complemented), * we must then transpose the value and return bits 30-23. - * */ static u32 sxg_crc_table[256]; /* Table of CRC's for all possible byte values */ @@ -2820,7 +2869,8 @@ static void sxg_mcast_set_mask(struct adapter_t *adapter) adapter->MulticastMask); if (adapter->MacFilter & (MAC_ALLMCAST | MAC_PROMISC)) { - /* Turn on all multicast addresses. We have to do this for promiscuous + /* + * Turn on all multicast addresses. We have to do this for promiscuous * mode as well as ALLMCAST mode. It saves the Microcode from having * to keep state about the MAC configuration. */ @@ -2830,7 +2880,8 @@ static void sxg_mcast_set_mask(struct adapter_t *adapter) /* DBG_ERROR("%s (%s) WRITE to slic_regs slic_mcastlow&high 0xFFFFFFFF\n",__func__, adapter->netdev->name); */ } else { - /* Commit our multicast mast to the SLIC by writing to the multicast + /* + * Commit our multicast mast to the SLIC by writing to the multicast * address mask registers */ DBG_ERROR("%s (%s) WRITE mcastlow[%lx] mcasthigh[%lx]\n", @@ -2886,7 +2937,8 @@ static void sxg_mcast_set_bit(struct adapter_t *adapter, char *address) /* Get the CRC polynomial for the mac address */ crcpoly = sxg_mcast_get_mac_hash(address); - /* We only have space on the SLIC for 64 entries. Lop + /* + * We only have space on the SLIC for 64 entries. Lop * off the top two bits. (2^6 = 64) */ crcpoly &= 0x3F; @@ -2911,10 +2963,12 @@ static void sxg_mcast_set_list(struct net_device *dev) static void sxg_unmap_mmio_space(struct adapter_t *adapter) { #if LINUX_FREES_ADAPTER_RESOURCES -/* if (adapter->Regs) { */ -/* iounmap(adapter->Regs); */ -/* } */ -/* adapter->slic_regs = NULL; */ +/* + * if (adapter->Regs) { + * iounmap(adapter->Regs); + * } + * adapter->slic_regs = NULL; + */ #endif } @@ -2942,8 +2996,10 @@ void SxgFreeResources(struct adapter_t *adapter) IsrCount = adapter->MsiEnabled ? RssIds : 1; if (adapter->BasicAllocations == FALSE) { - /* No allocations have been made, including spinlocks, */ - /* or listhead initializations. Return. */ + /* + * No allocations have been made, including spinlocks, + * or listhead initializations. Return. + */ return; } @@ -3080,14 +3136,17 @@ static int sxg_allocate_buffer_memory(struct adapter_t *adapter, SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "AllocMem", adapter, Size, BufferType, 0); - /* Grab the adapter lock and check the state. */ - /* If we're in anything other than INITIALIZING or */ - /* RUNNING state, fail. This is to prevent */ - /* allocations in an improper driver state */ + /* + * Grab the adapter lock and check the state. If we're in anything other + * than INITIALIZING or RUNNING state, fail. This is to prevent + * allocations in an improper driver state + */ spin_lock(&adapter->AdapterLock); - /* Increment the AllocationsPending count while holding */ - /* the lock. Pause processing relies on this */ + /* + * Increment the AllocationsPending count while holding + * the lock. Pause processing relies on this + */ ++adapter->AllocationsPending; spin_unlock(&adapter->AdapterLock); @@ -3095,8 +3154,10 @@ static int sxg_allocate_buffer_memory(struct adapter_t *adapter, Buffer = pci_alloc_consistent(adapter->pcidev, Size, &pBuffer); if (Buffer == NULL) { spin_lock(&adapter->AdapterLock); - /* Decrement the AllocationsPending count while holding */ - /* the lock. Pause processing relies on this */ + /* + * Decrement the AllocationsPending count while holding + * the lock. Pause processing relies on this + */ --adapter->AllocationsPending; spin_unlock(&adapter->AdapterLock); SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "AlcMemF1", @@ -3121,7 +3182,6 @@ static int sxg_allocate_buffer_memory(struct adapter_t *adapter, * Length - Memory length * * Return - * */ static void sxg_allocate_rcvblock_complete(struct adapter_t *adapter, void *RcvBlock, @@ -3146,10 +3206,11 @@ static void sxg_allocate_rcvblock_complete(struct adapter_t *adapter, ASSERT((BufferSize == SXG_RCV_DATA_BUFFER_SIZE) || (BufferSize == SXG_RCV_JUMBO_BUFFER_SIZE)); ASSERT(Length == SXG_RCV_BLOCK_SIZE(BufferSize)); - /* First, initialize the contained pool of receive data */ - /* buffers. This initialization requires NBL/NB/MDL allocations, */ - /* If any of them fail, free the block and return without */ - /* queueing the shared memory */ + /* + * First, initialize the contained pool of receive data buffers. + * This initialization requires NBL/NB/MDL allocations, if any of them + * fail, free the block and return without queueing the shared memory + */ RcvDataBuffer = RcvBlock; #if 0 for (i = 0, Paddr = *PhysicalAddress; @@ -3159,7 +3220,7 @@ static void sxg_allocate_rcvblock_complete(struct adapter_t *adapter, for (i = 0, Paddr = PhysicalAddress; i < SXG_RCV_DESCRIPTORS_PER_BLOCK; i++, Paddr += BufferSize, RcvDataBuffer += BufferSize) { - /* */ + RcvDataBufferHdr = (struct sxg_rcv_data_buffer_hdr*) (RcvDataBuffer + SXG_RCV_DATA_BUFFER_HDR_OFFSET @@ -3170,7 +3231,7 @@ static void sxg_allocate_rcvblock_complete(struct adapter_t *adapter, SXG_RCV_BUFFER_DATA_SIZE(BufferSize); SXG_ALLOCATE_RCV_PACKET(adapter, RcvDataBufferHdr); - //ASK hardcoded 2048 + /* ASK hardcoded 2048 */ RcvDataBufferHdr->PhysicalAddress = pci_map_single(adapter->pcidev, RcvDataBufferHdr->SxgDumbRcvPacket->data, 2048, @@ -3180,8 +3241,10 @@ static void sxg_allocate_rcvblock_complete(struct adapter_t *adapter, } - /* Place this entire block of memory on the AllRcvBlocks queue so it can be */ - /* free later */ + /* + * Place this entire block of memory on the AllRcvBlocks queue so it + * can be free later + */ RcvBlockHdr = (struct sxg_rcv_block_hdr*) ((unsigned char *)RcvBlock + SXG_RCV_BLOCK_HDR_OFFSET(BufferSize)); @@ -3254,7 +3317,6 @@ static void sxg_allocate_rcvblock_complete(struct adapter_t *adapter, * Length - Memory length * * Return - * */ static void sxg_allocate_sgl_buffer_complete(struct adapter_t *adapter, struct sxg_scatter_gather *SxgSgl, @@ -3279,10 +3341,11 @@ static void sxg_allocate_sgl_buffer_complete(struct adapter_t *adapter, static void sxg_adapter_set_hwaddr(struct adapter_t *adapter) { -/* DBG_ERROR ("%s ENTER card->config_set[%x] port[%d] physport[%d] funct#[%d]\n", __func__, */ -/* card->config_set, adapter->port, adapter->physport, adapter->functionnumber); */ -/* */ -/* sxg_dbg_macaddrs(adapter); */ +/* + * DBG_ERROR ("%s ENTER card->config_set[%x] port[%d] physport[%d] funct#[%d]\n", __func__, + * card->config_set, adapter->port, adapter->physport, adapter->functionnumber); + * sxg_dbg_macaddrs(adapter); + */ memcpy(adapter->macaddr, temp_mac_address, sizeof(struct sxg_config_mac)); /* DBG_ERROR ("%s AFTER copying from config.macinfo into currmacaddr\n", __func__); */ @@ -3335,18 +3398,15 @@ static int sxg_mac_set_address(struct net_device *dev, void *ptr) } #endif -/*****************************************************************************/ -/************* SXG DRIVER FUNCTIONS (below) ********************************/ -/*****************************************************************************/ - /* + * SXG DRIVER FUNCTIONS (below) + * * sxg_initialize_adapter - Initialize adapter * * Arguments - * adapter - A pointer to our adapter structure * - * Return - * int + * Return - int */ static int sxg_initialize_adapter(struct adapter_t *adapter) { @@ -3360,8 +3420,10 @@ static int sxg_initialize_adapter(struct adapter_t *adapter) RssIds = 1; /* XXXTODO SXG_RSS_CPU_COUNT(adapter); */ IsrCount = adapter->MsiEnabled ? RssIds : 1; - /* Sanity check SXG_UCODE_REGS structure definition to */ - /* make sure the length is correct */ + /* + * Sanity check SXG_UCODE_REGS structure definition to + * make sure the length is correct + */ ASSERT(sizeof(struct sxg_ucode_regs) == SXG_REGISTER_SIZE_PER_CPU); /* Disable interrupts */ @@ -3410,11 +3472,12 @@ static int sxg_initialize_adapter(struct adapter_t *adapter) /* Populate the card with receive buffers */ sxg_stock_rcv_buffers(adapter); - /* Initialize checksum offload capabilities. At the moment */ - /* we always enable IP and TCP receive checksums on the card. */ - /* Depending on the checksum configuration specified by the */ - /* user, we can choose to report or ignore the checksum */ - /* information provided by the card. */ + /* + * Initialize checksum offload capabilities. At the moment we always + * enable IP and TCP receive checksums on the card. Depending on the + * checksum configuration specified by the user, we can choose to + * report or ignore the checksum information provided by the card. + */ WRITE_REG(adapter->UcodeRegs[0].ReceiveChecksum, SXG_RCV_TCP_CSUM_ENABLED | SXG_RCV_IP_CSUM_ENABLED, TRUE); @@ -3426,8 +3489,10 @@ static int sxg_initialize_adapter(struct adapter_t *adapter) if (status != STATUS_SUCCESS) { return (status); } - /* Initialize Dead to FALSE. */ - /* SlicCheckForHang or SlicDumpThread will take it from here. */ + /* + * Initialize Dead to FALSE. + * SlicCheckForHang or SlicDumpThread will take it from here. + */ adapter->Dead = FALSE; adapter->PingOutstanding = FALSE; adapter->State = SXG_STATE_RUNNING; @@ -3465,8 +3530,10 @@ static int sxg_fill_descriptor_block(struct adapter_t *adapter, ASSERT(RcvDescriptorBlockHdr); - /* If we don't have the resources to fill the descriptor block, */ - /* return failure */ + /* + * If we don't have the resources to fill the descriptor block, + * return failure + */ if ((adapter->FreeRcvBufferCount < SXG_RCV_DESCRIPTORS_PER_BLOCK) || SXG_RING_FULL(RcvRingInfo)) { adapter->Stats.NoMem++; @@ -3500,10 +3567,12 @@ static int sxg_fill_descriptor_block(struct adapter_t *adapter, /* Add the descriptor block to receive descriptor ring 0 */ RingDescriptorCmd->Sgl = RcvDescriptorBlockHdr->PhysicalAddress; - /* RcvBuffersOnCard is not protected via the receive lock (see */ - /* sxg_process_event_queue) We don't want to grap a lock every time a */ - /* buffer is returned to us, so we use atomic interlocked functions */ - /* instead. */ + /* + * RcvBuffersOnCard is not protected via the receive lock (see + * sxg_process_event_queue) We don't want to grap a lock every time a + * buffer is returned to us, so we use atomic interlocked functions + * instead. + */ adapter->RcvBuffersOnCard += SXG_RCV_DESCRIPTORS_PER_BLOCK; SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DscBlk", @@ -3533,10 +3602,12 @@ static void sxg_stock_rcv_buffers(struct adapter_t *adapter) SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "StockBuf", adapter, adapter->RcvBuffersOnCard, adapter->FreeRcvBufferCount, adapter->AllRcvBlockCount); - /* First, see if we've got less than our minimum threshold of */ - /* receive buffers, there isn't an allocation in progress, and */ - /* we haven't exceeded our maximum.. get another block of buffers */ - /* None of this needs to be SMP safe. It's round numbers. */ + /* + * First, see if we've got less than our minimum threshold of + * receive buffers, there isn't an allocation in progress, and + * we haven't exceeded our maximum.. get another block of buffers + * None of this needs to be SMP safe. It's round numbers. + */ if ((adapter->FreeRcvBufferCount < SXG_MIN_RCV_DATA_BUFFERS) && (adapter->AllRcvBlockCount < SXG_MAX_RCV_BLOCKS) && (adapter->AllocationsPending == 0)) { @@ -3608,11 +3679,11 @@ static void sxg_complete_descriptor_blocks(struct adapter_t *adapter, spin_lock(&adapter->RcvQLock); ASSERT(Index != RcvRingInfo->Tail); while (RcvRingInfo->Tail != Index) { - /* */ - /* Locate the current Cmd (ring descriptor entry), and */ - /* associated receive descriptor block, and advance */ - /* the tail */ - /* */ + /* + * Locate the current Cmd (ring descriptor entry), and + * associated receive descriptor block, and advance + * the tail + */ SXG_RETURN_CMD(RingZero, RcvRingInfo, RingDescriptorCmd, RcvDescriptorBlockHdr); @@ -3622,10 +3693,12 @@ static void sxg_complete_descriptor_blocks(struct adapter_t *adapter, /* Clear the SGL field */ RingDescriptorCmd->Sgl = 0; - /* Attempt to refill it and hand it right back to the */ - /* card. If we fail to refill it, free the descriptor block */ - /* header. The card will be restocked later via the */ - /* RcvBuffersOnCard test */ + /* + * Attempt to refill it and hand it right back to the + * card. If we fail to refill it, free the descriptor block + * header. The card will be restocked later via the + * RcvBuffersOnCard test + */ if (sxg_fill_descriptor_block(adapter, RcvDescriptorBlockHdr) == STATUS_FAILURE) { SXG_FREE_RCV_DESCRIPTOR_BLOCK(adapter, diff --git a/drivers/staging/sxg/sxg.h b/drivers/staging/sxg/sxg.h index 8fc205995333..a6e5eb87e579 100644 --- a/drivers/staging/sxg/sxg.h +++ b/drivers/staging/sxg/sxg.h @@ -43,78 +43,78 @@ #define __SXG_DRIVER_H__ #define p_net_device struct net_device * -// struct sxg_stats - Probably move these to someplace where -// the slicstat (sxgstat?) program can get them. +/* + * struct sxg_stats - Probably move these to someplace where + * the slicstat (sxgstat?) program can get them. + */ struct sxg_stats { - // Xmt - u32 XmtNBL; // Offload send NBL count - u64 DumbXmtBytes; // Dumbnic send bytes - u64 SlowXmtBytes; // Slowpath send bytes - u64 FastXmtBytes; // Fastpath send bytes - u64 DumbXmtPkts; // Dumbnic send packets - u64 SlowXmtPkts; // Slowpath send packets - u64 FastXmtPkts; // Fastpath send packets - u64 DumbXmtUcastPkts; // directed packets - u64 DumbXmtMcastPkts; // Multicast packets - u64 DumbXmtBcastPkts; // OID_GEN_BROADCAST_FRAMES_RCV - u64 DumbXmtUcastBytes; // OID_GEN_DIRECTED_BYTES_XMIT - u64 DumbXmtMcastBytes; // OID_GEN_MULTICAST_BYTES_XMIT - u64 DumbXmtBcastBytes; // OID_GEN_BROADCAST_BYTES_XMIT - u64 XmtErrors; // OID_GEN_XMIT_ERROR - u64 XmtDiscards; // OID_GEN_XMIT_DISCARDS - u64 XmtOk; // OID_GEN_XMIT_OK - u64 XmtQLen; // OID_GEN_TRANSMIT_QUEUE_LENGTH - u64 XmtZeroFull; // Transmit ring zero full - // Rcv - u32 RcvNBL; // Offload recieve NBL count - u64 DumbRcvBytes; // dumbnic recv bytes - u64 DumbRcvUcastBytes; // OID_GEN_DIRECTED_BYTES_RCV - u64 DumbRcvMcastBytes; // OID_GEN_MULTICAST_BYTES_RCV - u64 DumbRcvBcastBytes; // OID_GEN_BROADCAST_BYTES_RCV - u64 SlowRcvBytes; // Slowpath recv bytes - u64 FastRcvBytes; // Fastpath recv bytes - u64 DumbRcvPkts; // OID_GEN_DIRECTED_FRAMES_RCV - u64 DumbRcvTcpPkts; // See SxgCollectStats - u64 DumbRcvUcastPkts; // directed packets - u64 DumbRcvMcastPkts; // Multicast packets - u64 DumbRcvBcastPkts; // OID_GEN_BROADCAST_FRAMES_RCV - u64 SlowRcvPkts; // OID_GEN_DIRECTED_FRAMES_RCV - u64 RcvErrors; // OID_GEN_RCV_ERROR - u64 RcvDiscards; // OID_GEN_RCV_DISCARDS - u64 RcvNoBuffer; // OID_GEN_RCV_NO_BUFFER - u64 PdqFull; // Processed Data Queue Full - u64 EventRingFull; // Event ring full - // Verbose stats - u64 MaxSends; // Max sends outstanding - u64 NoSglBuf; // SGL buffer allocation failure - u64 SglFail; // NDIS SGL failure - u64 SglAsync; // NDIS SGL failure - u64 NoMem; // Memory allocation failure - u64 NumInts; // Interrupts - u64 FalseInts; // Interrupt with ISR == 0 - u64 XmtDrops; // No sahara DRAM buffer for xmt - // Sahara receive status - u64 TransportCsum; // SXG_RCV_STATUS_TRANSPORT_CSUM - u64 TransportUflow; // SXG_RCV_STATUS_TRANSPORT_UFLOW - u64 TransportHdrLen; // SXG_RCV_STATUS_TRANSPORT_HDRLEN - u64 NetworkCsum; // SXG_RCV_STATUS_NETWORK_CSUM: - u64 NetworkUflow; // SXG_RCV_STATUS_NETWORK_UFLOW: - u64 NetworkHdrLen; // SXG_RCV_STATUS_NETWORK_HDRLEN: - u64 Parity; // SXG_RCV_STATUS_PARITY - u64 LinkParity; // SXG_RCV_STATUS_LINK_PARITY: - u64 LinkEarly; // SXG_RCV_STATUS_LINK_EARLY: - u64 LinkBufOflow; // SXG_RCV_STATUS_LINK_BUFOFLOW: - u64 LinkCode; // SXG_RCV_STATUS_LINK_CODE: - u64 LinkDribble; // SXG_RCV_STATUS_LINK_DRIBBLE: - u64 LinkCrc; // SXG_RCV_STATUS_LINK_CRC: - u64 LinkOflow; // SXG_RCV_STATUS_LINK_OFLOW: - u64 LinkUflow; // SXG_RCV_STATUS_LINK_UFLOW: + /* Xmt */ + u32 XmtNBL; /* Offload send NBL count */ + u64 DumbXmtBytes; /* Dumbnic send bytes */ + u64 SlowXmtBytes; /* Slowpath send bytes */ + u64 FastXmtBytes; /* Fastpath send bytes */ + u64 DumbXmtPkts; /* Dumbnic send packets */ + u64 SlowXmtPkts; /* Slowpath send packets */ + u64 FastXmtPkts; /* Fastpath send packets */ + u64 DumbXmtUcastPkts; /* directed packets */ + u64 DumbXmtMcastPkts; /* Multicast packets */ + u64 DumbXmtBcastPkts; /* OID_GEN_BROADCAST_FRAMES_RCV */ + u64 DumbXmtUcastBytes; /* OID_GEN_DIRECTED_BYTES_XMIT */ + u64 DumbXmtMcastBytes; /* OID_GEN_MULTICAST_BYTES_XMIT */ + u64 DumbXmtBcastBytes; /* OID_GEN_BROADCAST_BYTES_XMIT */ + u64 XmtErrors; /* OID_GEN_XMIT_ERROR */ + u64 XmtDiscards; /* OID_GEN_XMIT_DISCARDS */ + u64 XmtOk; /* OID_GEN_XMIT_OK */ + u64 XmtQLen; /* OID_GEN_TRANSMIT_QUEUE_LENGTH */ + u64 XmtZeroFull; /* Transmit ring zero full */ + /* Rcv */ + u32 RcvNBL; /* Offload recieve NBL count */ + u64 DumbRcvBytes; /* dumbnic recv bytes */ + u64 DumbRcvUcastBytes; /* OID_GEN_DIRECTED_BYTES_RCV */ + u64 DumbRcvMcastBytes; /* OID_GEN_MULTICAST_BYTES_RCV */ + u64 DumbRcvBcastBytes; /* OID_GEN_BROADCAST_BYTES_RCV */ + u64 SlowRcvBytes; /* Slowpath recv bytes */ + u64 FastRcvBytes; /* Fastpath recv bytes */ + u64 DumbRcvPkts; /* OID_GEN_DIRECTED_FRAMES_RCV */ + u64 DumbRcvTcpPkts; /* See SxgCollectStats */ + u64 DumbRcvUcastPkts; /* directed packets */ + u64 DumbRcvMcastPkts; /* Multicast packets */ + u64 DumbRcvBcastPkts; /* OID_GEN_BROADCAST_FRAMES_RCV */ + u64 SlowRcvPkts; /* OID_GEN_DIRECTED_FRAMES_RCV */ + u64 RcvErrors; /* OID_GEN_RCV_ERROR */ + u64 RcvDiscards; /* OID_GEN_RCV_DISCARDS */ + u64 RcvNoBuffer; /* OID_GEN_RCV_NO_BUFFER */ + u64 PdqFull; /* Processed Data Queue Full */ + u64 EventRingFull; /* Event ring full */ + /* Verbose stats */ + u64 MaxSends; /* Max sends outstanding */ + u64 NoSglBuf; /* SGL buffer allocation failure */ + u64 SglFail; /* NDIS SGL failure */ + u64 SglAsync; /* NDIS SGL failure */ + u64 NoMem; /* Memory allocation failure */ + u64 NumInts; /* Interrupts */ + u64 FalseInts; /* Interrupt with ISR == 0 */ + u64 XmtDrops; /* No sahara DRAM buffer for xmt */ + /* Sahara receive status */ + u64 TransportCsum; /* SXG_RCV_STATUS_TRANSPORT_CSUM */ + u64 TransportUflow; /* SXG_RCV_STATUS_TRANSPORT_UFLOW */ + u64 TransportHdrLen; /* SXG_RCV_STATUS_TRANSPORT_HDRLEN */ + u64 NetworkCsum; /* SXG_RCV_STATUS_NETWORK_CSUM: */ + u64 NetworkUflow; /* SXG_RCV_STATUS_NETWORK_UFLOW: */ + u64 NetworkHdrLen; /* SXG_RCV_STATUS_NETWORK_HDRLEN: */ + u64 Parity; /* SXG_RCV_STATUS_PARITY */ + u64 LinkParity; /* SXG_RCV_STATUS_LINK_PARITY: */ + u64 LinkEarly; /* SXG_RCV_STATUS_LINK_EARLY: */ + u64 LinkBufOflow; /* SXG_RCV_STATUS_LINK_BUFOFLOW: */ + u64 LinkCode; /* SXG_RCV_STATUS_LINK_CODE: */ + u64 LinkDribble; /* SXG_RCV_STATUS_LINK_DRIBBLE: */ + u64 LinkCrc; /* SXG_RCV_STATUS_LINK_CRC: */ + u64 LinkOflow; /* SXG_RCV_STATUS_LINK_OFLOW: */ + u64 LinkUflow; /* SXG_RCV_STATUS_LINK_UFLOW: */ }; -/**************************************************************************** - * DUMB-NIC Send path definitions - ****************************************************************************/ +/* DUMB-NIC Send path definitions */ #define SXG_COMPLETE_DUMB_SEND(_pAdapt, _skb) { \ ASSERT(_skb); \ @@ -126,17 +126,17 @@ struct sxg_stats { dev_kfree_skb(_skb); \ } -// Locate current receive header buffer location. Use this -// instead of RcvDataHdr->VirtualAddress since the data -// may have been offset by SXG_ADVANCE_MDL_OFFSET +/* + * Locate current receive header buffer location. Use this + * instead of RcvDataHdr->VirtualAddress since the data + * may have been offset by SXG_ADVANCE_MDL_OFFSET + */ #define SXG_RECEIVE_DATA_LOCATION(_RcvDataHdr) (_RcvDataHdr)->skb->data -/************************************************************************ - * Dumb-NIC receive processing - ************************************************************************/ -// Define an SXG_PACKET as an NDIS_PACKET +/* Dumb-NIC receive processing */ +/* Define an SXG_PACKET as an NDIS_PACKET */ #define PSXG_PACKET struct sk_buff * -// Indications array size +/* Indications array size */ #define SXG_RCV_ARRAYSIZE 64 #define SXG_ALLOCATE_RCV_PACKET(_pAdapt, _RcvDataBufferHdr) { \ @@ -156,9 +156,11 @@ struct sxg_stats { } \ } -// Macro to add a NDIS_PACKET to an indication array -// If we fill up our array of packet pointers, then indicate this -// block up now and start on a new one. +/* + * Macro to add a NDIS_PACKET to an indication array + * If we fill up our array of packet pointers, then indicate this + * block up now and start on a new one. + */ #define SXG_ADD_RCV_PACKET(_pAdapt, _Packet, _PrevPacket, _IndicationList, _NumPackets) { \ (_IndicationList)[_NumPackets] = (_Packet); \ (_NumPackets)++; \ @@ -182,7 +184,7 @@ struct sxg_stats { #define SXG_REINIATIALIZE_PACKET(_Packet) \ {} /*_NdisReinitializePacket(_Packet)*/ /* this is not necessary with an skb */ -// Definitions to initialize Dumb-nic Receive NBLs +/* Definitions to initialize Dumb-nic Receive NBLs */ #define SXG_RCV_PACKET_BUFFER_HDR(_Packet) (((struct sxg_rcv_nbl_reserved *)((_Packet)->MiniportReservedEx))->RcvDataBufferHdr) #define SXG_RCV_SET_CHECKSUM_INFO(_Packet, _Cpi) \ @@ -210,10 +212,10 @@ struct sxg_stats { skb_put(Packet, (_Event)->Length); \ } -/////////////////////////////////////////////////////////////////////////////// -// Macros to free a receive data buffer and receive data descriptor block -/////////////////////////////////////////////////////////////////////////////// -// NOTE - Lock must be held with RCV macros +/* + * Macros to free a receive data buffer and receive data descriptor block + * NOTE - Lock must be held with RCV macros + */ #define SXG_GET_RCV_DATA_BUFFER(_pAdapt, _Hdr) { \ struct list_entry *_ple; \ _Hdr = NULL; \ @@ -246,7 +248,7 @@ struct sxg_stats { InsertTailList(&(_pAdapt)->FreeRcvBlocks, &(_Hdr)->FreeList); \ } -// SGL macros +/* SGL macros */ #define SXG_FREE_SGL_BUFFER(_pAdapt, _Sgl, _NB) { \ spin_lock(&(_pAdapt)->SglQLock); \ (_pAdapt)->FreeSglBufferCount++; \ @@ -257,11 +259,13 @@ struct sxg_stats { spin_unlock(&(_pAdapt)->SglQLock); \ } -// Get an SGL buffer from the free queue. The first part of this macro -// attempts to keep ahead of buffer depletion by allocating more when -// we hit a minimum threshold. Note that we don't grab the lock -// until after that. We're dealing with round numbers here, so we don't need to, -// and not grabbing it avoids a possible double-trip. +/* + * Get an SGL buffer from the free queue. The first part of this macro + * attempts to keep ahead of buffer depletion by allocating more when + * we hit a minimum threshold. Note that we don't grab the lock + * until after that. We're dealing with round numbers here, so we don't need to, + * and not grabbing it avoids a possible double-trip. + */ #define SXG_GET_SGL_BUFFER(_pAdapt, _Sgl) { \ struct list_entry *_ple; \ if ((_pAdapt->FreeSglBufferCount < SXG_MIN_SGL_BUFFERS) && \ @@ -285,28 +289,30 @@ struct sxg_stats { spin_unlock(&(_pAdapt)->SglQLock); \ } -// -// struct sxg_multicast_address -// -// Linked list of multicast addresses. +/* + * struct sxg_multicast_address + * Linked list of multicast addresses. + */ struct sxg_multicast_address { unsigned char Address[6]; struct sxg_multicast_address *Next; }; -// Structure to maintain chimney send and receive buffer queues. -// This structure maintains NET_BUFFER_LIST queues that are -// given to us via the Chimney MiniportTcpOffloadSend and -// MiniportTcpOffloadReceive routines. This structure DOES NOT -// manage our data buffer queue +/* + * Structure to maintain chimney send and receive buffer queues. + * This structure maintains NET_BUFFER_LIST queues that are + * given to us via the Chimney MiniportTcpOffloadSend and + * MiniportTcpOffloadReceive routines. This structure DOES NOT + * manage our data buffer queue + */ struct sxg_buffer_queue { - u32 Type; // Slow or fast - See below - u32 Direction; // Xmt or Rcv - u32 Bytes; // Byte count - u32 * Head; // Send queue head - u32 * Tail; // Send queue tail -// PNET_BUFFER_LIST NextNBL; // Short cut - next NBL -// PNET_BUFFER NextNB; // Short cut - next NB + u32 Type; /* Slow or fast - See below */ + u32 Direction; /* Xmt or Rcv */ + u32 Bytes; /* Byte count */ + u32 * Head; /* Send queue head */ + u32 * Tail; /* Send queue tail */ +/* PNET_BUFFER_LIST NextNBL;*/ /* Short cut - next NBL */ +/* PNET_BUFFER NextNB; */ /* Short cut - next NB */ }; #define SXG_SLOW_SEND_BUFFER 0 @@ -329,64 +335,66 @@ struct sxg_buffer_queue { #define SXG_RSS_CPU_COUNT(_pAdapt) \ ((_pAdapt)->RssEnabled ? NR_CPUS : 1) -/**************************************************************************** - * DRIVER and ADAPTER structures - ****************************************************************************/ +/* DRIVER and ADAPTER structures */ -// Adapter states - These states closely match the adapter states -// documented in the DDK (with a few exceptions). +/* + * Adapter states - These states closely match the adapter states + * documented in the DDK (with a few exceptions). + */ enum SXG_STATE { - SXG_STATE_INITIALIZING, // Initializing - SXG_STATE_BOOTDIAG, // Boot-Diagnostic mode - SXG_STATE_PAUSING, // Pausing - SXG_STATE_PAUSED, // Paused - SXG_STATE_RUNNING, // Running - SXG_STATE_RESETTING, // Reset in progress - SXG_STATE_SLEEP, // Sleeping - SXG_STATE_DIAG, // Diagnostic mode - SXG_STATE_HALTING, // Halting - SXG_STATE_HALTED, // Down or not-initialized - SXG_STATE_SHUTDOWN // shutdown + SXG_STATE_INITIALIZING, /* Initializing */ + SXG_STATE_BOOTDIAG, /* Boot-Diagnostic mode */ + SXG_STATE_PAUSING, /* Pausing */ + SXG_STATE_PAUSED, /* Paused */ + SXG_STATE_RUNNING, /* Running */ + SXG_STATE_RESETTING, /* Reset in progress */ + SXG_STATE_SLEEP, /* Sleeping */ + SXG_STATE_DIAG, /* Diagnostic mode */ + SXG_STATE_HALTING, /* Halting */ + SXG_STATE_HALTED, /* Down or not-initialized */ + SXG_STATE_SHUTDOWN /* shutdown */ }; -// Link state +/* Link state */ enum SXG_LINK_STATE { SXG_LINK_DOWN, SXG_LINK_UP }; -// Link initialization timeout in 100us units -#define SXG_LINK_TIMEOUT 100000 // 10 Seconds - REDUCE! +/* Link initialization timeout in 100us units */ +#define SXG_LINK_TIMEOUT 100000 /* 10 Seconds - REDUCE! */ -// Microcode file selection codes +/* Microcode file selection codes */ enum SXG_UCODE_SEL { - SXG_UCODE_SAHARA, // Sahara ucode - SXG_UCODE_SDIAGCPU, // Sahara CPU diagnostic ucode - SXG_UCODE_SDIAGSYS // Sahara system diagnostic ucode + SXG_UCODE_SAHARA, /* Sahara ucode */ + SXG_UCODE_SDIAGCPU, /* Sahara CPU diagnostic ucode */ + SXG_UCODE_SDIAGSYS /* Sahara system diagnostic ucode */ }; #define SXG_DISABLE_ALL_INTERRUPTS(_padapt) sxg_disable_interrupt(_padapt) #define SXG_ENABLE_ALL_INTERRUPTS(_padapt) sxg_enable_interrupt(_padapt) -// This probably lives in a proto.h file. Move later +/* This probably lives in a proto.h file. Move later */ #define SXG_MULTICAST_PACKET(_pether) ((_pether)->ether_dhost[0] & 0x01) #define SXG_BROADCAST_PACKET(_pether) ((*(u32 *)(_pether)->ether_dhost == 0xFFFFFFFF) && \ (*(u16 *)&(_pether)->ether_dhost[4] == 0xFFFF)) -// For DbgPrints +/* For DbgPrints */ #define SXG_ID DPFLTR_IHVNETWORK_ID #define SXG_ERROR DPFLTR_ERROR_LEVEL -// -// struct sxg_driver structure - -// -// contains information about the sxg driver. There is only -// one of these, and it is defined as a global. +/* + * struct sxg_driver structure - + * + * contains information about the sxg driver. There is only + * one of these, and it is defined as a global. + */ + struct sxg_driver { - struct adapter_t *Adapters; // Linked list of adapters - ushort AdapterID; // Maintain unique adapter ID + struct adapter_t *Adapters; /* Linked list of adapters */ + ushort AdapterID; /* Maintain unique adapter ID */ }; #ifdef STATUS_SUCCESS @@ -404,12 +412,14 @@ struct sxg_driver { #define SLIC_MAX_CARDS 32 #define SLIC_MAX_PORTS 4 /* Max # of ports per card */ #if SLIC_DUMP_ENABLED -// Dump buffer size -// -// This cannot be bigger than the max DMA size the card supports, -// given the current code structure in the host and ucode. -// Mojave supports 16K, Oasis supports 16K-1, so -// just set this at 15K, shouldnt make that much of a diff. + +/* + * Dump buffer size + * This cannot be bigger than the max DMA size the card supports, + * given the current code structure in the host and ucode. + * Mojave supports 16K, Oasis supports 16K-1, so + * just set this at 15K, shouldnt make that much of a diff. + */ #define DUMP_BUF_SIZE 0x3C00 #endif @@ -560,123 +570,123 @@ struct adapter_t { u32 rcv_interrupt_yields; u32 intagg_period; struct net_device_stats stats; - u32 * MiniportHandle; // Our miniport handle - enum SXG_STATE State; // Adapter state - enum SXG_LINK_STATE LinkState; // Link state - u64 LinkSpeed; // Link Speed - u32 PowerState; // NDIS power state - struct adapter_t *Next; // Linked list - ushort AdapterID; // 1..n + u32 * MiniportHandle; /* Our miniport handle */ + enum SXG_STATE State; /* Adapter state */ + enum SXG_LINK_STATE LinkState; /* Link state */ + u64 LinkSpeed; /* Link Speed */ + u32 PowerState; /* NDIS power state */ + struct adapter_t *Next; /* Linked list */ + ushort AdapterID; /* 1..n */ struct net_device * netdev; struct net_device * next_netdevice; - struct pci_dev * pcidev; - - struct sxg_multicast_address *MulticastAddrs; // Multicast list - u64 MulticastMask; // Multicast mask - u32 * InterruptHandle; // Register Interrupt handle - u32 InterruptLevel; // From Resource list - u32 InterruptVector; // From Resource list - spinlock_t AdapterLock; /* Serialize access adapter routines */ - spinlock_t Bit64RegLock; /* For writing 64-bit addresses */ - struct sxg_hw_regs *HwRegs; // Sahara HW Register Memory (BAR0/1) - struct sxg_ucode_regs *UcodeRegs; // Microcode Register Memory (BAR2/3) - struct sxg_tcb_regs *TcbRegs; // Same as Ucode regs - See sxghw.h - ushort FrameSize; // Maximum frame size - u32 * DmaHandle; // NDIS DMA handle - u32 * PacketPoolHandle; // Used with NDIS 5.2 only. Don't ifdef out - u32 * BufferPoolHandle; // Used with NDIS 5.2 only. Don't ifdef out - u32 MacFilter; // NDIS MAC Filter - struct sxg_event_ring *EventRings; // Host event rings. 1/CPU to 16 max - dma_addr_t PEventRings; // Physical address - u32 NextEvent[SXG_MAX_RSS]; // Current location in ring - dma_addr_t PTcbBuffers; // TCB Buffers - physical address - dma_addr_t PTcbCompBuffers; // TCB Composite Buffers - phys addr - struct sxg_xmt_ring *XmtRings; // Transmit rings - dma_addr_t PXmtRings; // Transmit rings - physical address - struct sxg_ring_info XmtRingZeroInfo; // Transmit ring 0 info + struct pci_dev *pcidev; + + struct sxg_multicast_address *MulticastAddrs; /* Multicast list */ + u64 MulticastMask; /* Multicast mask */ + u32 *InterruptHandle; /* Register Interrupt handle */ + u32 InterruptLevel; /* From Resource list */ + u32 InterruptVector; /* From Resource list */ + spinlock_t AdapterLock; /* Serialize access adapter routines */ + spinlock_t Bit64RegLock; /* For writing 64-bit addresses */ + struct sxg_hw_regs *HwRegs; /* Sahara HW Register Memory (BAR0/1) */ + struct sxg_ucode_regs *UcodeRegs; /* Microcode Register Memory (BAR2/3) */ + struct sxg_tcb_regs *TcbRegs; /* Same as Ucode regs - See sxghw.h */ + ushort FrameSize; /* Maximum frame size */ + u32 * DmaHandle; /* NDIS DMA handle */ + u32 * PacketPoolHandle; /* Used with NDIS 5.2 only. Don't ifdef out */ + u32 * BufferPoolHandle; /* Used with NDIS 5.2 only. Don't ifdef out */ + u32 MacFilter; /* NDIS MAC Filter */ + struct sxg_event_ring *EventRings; /* Host event rings. 1/CPU to 16 max */ + dma_addr_t PEventRings; /* Physical address */ + u32 NextEvent[SXG_MAX_RSS]; /* Current location in ring */ + dma_addr_t PTcbBuffers; /* TCB Buffers - physical address */ + dma_addr_t PTcbCompBuffers; /* TCB Composite Buffers - phys addr */ + struct sxg_xmt_ring *XmtRings; /* Transmit rings */ + dma_addr_t PXmtRings; /* Transmit rings - physical address */ + struct sxg_ring_info XmtRingZeroInfo; /* Transmit ring 0 info */ + spinlock_t XmtZeroLock; /* Transmit ring 0 lock */ - u32 * XmtRingZeroIndex; // Shared XMT ring 0 index - dma_addr_t PXmtRingZeroIndex; // Shared XMT ring 0 index - physical - struct list_entry FreeProtocolHeaders;// Free protocol headers - u32 FreeProtoHdrCount; // Count - void * ProtocolHeaders; // Block of protocol header - dma_addr_t PProtocolHeaders; // Block of protocol headers - phys - - struct sxg_rcv_ring *RcvRings; // Receive rings - dma_addr_t PRcvRings; // Receive rings - physical address - struct sxg_ring_info RcvRingZeroInfo; // Receive ring 0 info - - u32 * Isr; // Interrupt status register - dma_addr_t PIsr; // ISR - physical address - u32 IsrCopy[SXG_MAX_RSS]; // Copy of ISR - ushort InterruptsEnabled; // Bitmask of enabled vectors - unsigned char * IndirectionTable; // RSS indirection table - dma_addr_t PIndirectionTable; // Physical address - ushort RssTableSize; // From NDIS_RECEIVE_SCALE_PARAMETERS - ushort HashKeySize; // From NDIS_RECEIVE_SCALE_PARAMETERS - unsigned char HashSecretKey[40]; // rss key - u32 HashInformation; - // Receive buffer queues - spinlock_t RcvQLock; /* Receive Queue Lock */ - struct list_entry FreeRcvBuffers; // Free SXG_DATA_BUFFER queue - struct list_entry FreeRcvBlocks; // Free SXG_RCV_DESCRIPTOR_BLOCK Q - struct list_entry AllRcvBlocks; // All SXG_RCV_BLOCKs - ushort FreeRcvBufferCount; // Number of free rcv data buffers - ushort FreeRcvBlockCount; // # of free rcv descriptor blocks - ushort AllRcvBlockCount; // Number of total receive blocks - ushort ReceiveBufferSize; // SXG_RCV_DATA/JUMBO_BUFFER_SIZE only - u32 AllocationsPending; // Receive allocation pending - u32 RcvBuffersOnCard; // SXG_DATA_BUFFERS owned by card - // SGL buffers + u32 * XmtRingZeroIndex; /* Shared XMT ring 0 index */ + dma_addr_t PXmtRingZeroIndex; /* Shared XMT ring 0 index - physical */ + struct list_entry FreeProtocolHeaders;/* Free protocol headers */ + u32 FreeProtoHdrCount; /* Count */ + void * ProtocolHeaders; /* Block of protocol header */ + dma_addr_t PProtocolHeaders; /* Block of protocol headers - phys */ + + struct sxg_rcv_ring *RcvRings; /* Receive rings */ + dma_addr_t PRcvRings; /* Receive rings - physical address */ + struct sxg_ring_info RcvRingZeroInfo; /* Receive ring 0 info */ + + u32 * Isr; /* Interrupt status register */ + dma_addr_t PIsr; /* ISR - physical address */ + u32 IsrCopy[SXG_MAX_RSS]; /* Copy of ISR */ + ushort InterruptsEnabled; /* Bitmask of enabled vectors */ + unsigned char *IndirectionTable; /* RSS indirection table */ + dma_addr_t PIndirectionTable; /* Physical address */ + ushort RssTableSize; /* From NDIS_RECEIVE_SCALE_PARAMETERS */ + ushort HashKeySize; /* From NDIS_RECEIVE_SCALE_PARAMETERS */ + unsigned char HashSecretKey[40]; /* rss key */ + u32 HashInformation; + /* Receive buffer queues */ + spinlock_t RcvQLock; /* Receive Queue Lock */ + struct list_entry FreeRcvBuffers; /* Free SXG_DATA_BUFFER queue */ + struct list_entry FreeRcvBlocks; /* Free SXG_RCV_DESCRIPTOR_BLOCK Q */ + struct list_entry AllRcvBlocks; /* All SXG_RCV_BLOCKs */ + ushort FreeRcvBufferCount; /* Number of free rcv data buffers */ + ushort FreeRcvBlockCount; /* # of free rcv descriptor blocks */ + ushort AllRcvBlockCount; /* Number of total receive blocks */ + ushort ReceiveBufferSize; /* SXG_RCV_DATA/JUMBO_BUFFER_SIZE only */ + u32 AllocationsPending; /* Receive allocation pending */ + u32 RcvBuffersOnCard; /* SXG_DATA_BUFFERS owned by card */ + /* SGL buffers */ spinlock_t SglQLock; /* SGL Queue Lock */ - struct list_entry FreeSglBuffers; // Free SXG_SCATTER_GATHER - struct list_entry AllSglBuffers; // All SXG_SCATTER_GATHER - ushort FreeSglBufferCount; // Number of free SGL buffers - ushort AllSglBufferCount; // Number of total SGL buffers - u32 CurrentTime; // Tick count - u32 FastpathConnections;// # of fastpath connections - // Various single-bit flags: - u32 BasicAllocations:1; // Locks and listheads - u32 IntRegistered:1; // Interrupt registered - u32 PingOutstanding:1; // Ping outstanding to card - u32 Dead:1; // Card dead - u32 DumpDriver:1; // OID_SLIC_DRIVER_DUMP request - u32 DumpCard:1; // OID_SLIC_CARD_DUMP request - u32 DumpCmdRunning:1; // Dump command in progress - u32 DebugRunning:1; // AGDB debug in progress - u32 JumboEnabled:1; // Jumbo frames enabled - u32 MsiEnabled:1; // MSI interrupt enabled - u32 RssEnabled:1; // RSS Enabled - u32 FailOnBadEeprom:1; // Fail on Bad Eeprom - u32 DiagStart:1; // Init adapter for diagnostic start - // Stats - u32 PendingRcvCount; // Outstanding rcv indications - u32 PendingXmtCount; // Outstanding send requests - struct sxg_stats Stats; // Statistics - u32 ReassBufs; // Number of reassembly buffers - // Card Crash Info - ushort CrashLocation; // Microcode crash location - unsigned char CrashCpu; // Sahara CPU ID - // Diagnostics - // PDIAG_CMD DiagCmds; // List of free diagnostic commands - // PDIAG_BUFFER DiagBuffers; // List of free diagnostic buffers - // PDIAG_REQ DiagReqQ; // List of outstanding (asynchronous) diag requests - // u32 DiagCmdTimeout; // Time out for diag cmds (seconds) XXXTODO - replace with SXG_PARAM var? - // unsigned char DiagDmaDesc[DMA_CPU_CTXS]; // Free DMA descriptors bit field (32 CPU ctx * 8 DMA ctx) - - ///////////////////////////////////////////////////////////////////// - // Put preprocessor-conditional fields at the end so we don't - // have to recompile sxgdbg everytime we reconfigure the driver - ///////////////////////////////////////////////////////////////////// + struct list_entry FreeSglBuffers; /* Free struct sxg_scatter_gather */ + struct list_entry AllSglBuffers; /* All struct sxg_scatter_gather */ + ushort FreeSglBufferCount; /* Number of free SGL buffers */ + ushort AllSglBufferCount; /* Number of total SGL buffers */ + u32 CurrentTime; /* Tick count */ + u32 FastpathConnections;/* # of fastpath connections */ + /* Various single-bit flags: */ + u32 BasicAllocations:1; /* Locks and listheads */ + u32 IntRegistered:1; /* Interrupt registered */ + u32 PingOutstanding:1; /* Ping outstanding to card */ + u32 Dead:1; /* Card dead */ + u32 DumpDriver:1; /* OID_SLIC_DRIVER_DUMP request */ + u32 DumpCard:1; /* OID_SLIC_CARD_DUMP request */ + u32 DumpCmdRunning:1; /* Dump command in progress */ + u32 DebugRunning:1; /* AGDB debug in progress */ + u32 JumboEnabled:1; /* Jumbo frames enabled */ + u32 MsiEnabled:1; /* MSI interrupt enabled */ + u32 RssEnabled:1; /* RSS Enabled */ + u32 FailOnBadEeprom:1; /* Fail on Bad Eeprom */ + u32 DiagStart:1; /* Init adapter for diagnostic start */ + /* Stats */ + u32 PendingRcvCount; /* Outstanding rcv indications */ + u32 PendingXmtCount; /* Outstanding send requests */ + struct sxg_stats Stats; /* Statistics */ + u32 ReassBufs; /* Number of reassembly buffers */ + /* Card Crash Info */ + ushort CrashLocation; /* Microcode crash location */ + unsigned char CrashCpu; /* Sahara CPU ID */ + /* Diagnostics */ + /* PDIAG_CMD DiagCmds; */ /* List of free diagnostic commands */ + /* PDIAG_BUFFER DiagBuffers; */ /* List of free diagnostic buffers */ + /* PDIAG_REQ DiagReqQ; */ /* List of outstanding (asynchronous) diag requests */ + /* u32 DiagCmdTimeout; */ /* Time out for diag cmds (seconds) XXXTODO - replace with SXG_PARAM var? */ + /* unsigned char DiagDmaDesc[DMA_CPU_CTXS]; */ /* Free DMA descriptors bit field (32 CPU ctx * 8 DMA ctx) */ + /* + * Put preprocessor-conditional fields at the end so we don't + * have to recompile sxgdbg everytime we reconfigure the driver + */ #if defined(CONFIG_X86) - u32 AddrUpper; // Upper 32 bits of 64-bit register + u32 AddrUpper; /* Upper 32 bits of 64-bit register */ #endif - //#if SXG_FAILURE_DUMP - // NDIS_EVENT DumpThreadEvent; // syncronize dump thread - // BOOLEAN DumpThreadRunning; // termination flag - // PSXG_DUMP_CMD DumpBuffer; // 68k - Cmd and Buffer - // dma_addr_t PDumpBuffer; // Physical address - //#endif // SXG_FAILURE_DUMP + /*#if SXG_FAILURE_DUMP */ + /* NDIS_EVENT DumpThreadEvent; */ /* syncronize dump thread */ + /* BOOLEAN DumpThreadRunning; */ /* termination flag */ + /* PSXG_DUMP_CMD DumpBuffer; */ /* 68k - Cmd and Buffer */ + /* dma_addr_t PDumpBuffer; */ /* Physical address */ + /*#endif */ /* SXG_FAILURE_DUMP */ }; @@ -685,12 +695,10 @@ struct adapter_t { #define SLIC_DUMP_IN_PROGRESS 2 #define SLIC_DUMP_DONE 3 -/**************************************************************************** - * +/* * Microcode crash information structure. This * structure is written out to the card's SRAM when the microcode panic's. - * - ****************************************************************************/ + */ struct slic_crash_info { ushort cpu_id; ushort crash_pc; diff --git a/drivers/staging/sxg/sxg_os.h b/drivers/staging/sxg/sxg_os.h index 81729ea6a228..55e4c382eba0 100644 --- a/drivers/staging/sxg/sxg_os.h +++ b/drivers/staging/sxg/sxg_os.h @@ -128,7 +128,7 @@ static __inline struct list_entry *RemoveTailList(struct list_entry *l) #define SLIC_TIMESTAMP(value) #endif -/****************** SXG DEFINES *****************************************/ +/* SXG DEFINES */ #ifdef ATKDBG #define SXG_TIMESTAMP(value) { \ diff --git a/drivers/staging/sxg/sxgdbg.h b/drivers/staging/sxg/sxgdbg.h index 65098d2973ba..7c1dfae6c9ad 100644 --- a/drivers/staging/sxg/sxgdbg.h +++ b/drivers/staging/sxg/sxgdbg.h @@ -100,9 +100,7 @@ struct trace_entry { u32 arg4; /* Caller arg4 */ }; -/* - * Driver types for driver field in struct trace_entry - */ +/* Driver types for driver field in struct trace_entry */ #define TRACE_SXG 1 #define TRACE_VPCI 2 #define TRACE_SLIC 3 @@ -129,11 +127,7 @@ struct sxg_trace_buffer { #define TRACE_NOISY 10 /* Everything in the world */ -/********************************************************************** - * - * The macros themselves - - * - *********************************************************************/ +/* The macros themselves */ #if ATK_TRACE_ENABLED #define SXG_TRACE_INIT(buffer, tlevel) \ { \ @@ -146,9 +140,7 @@ struct sxg_trace_buffer { #define SXG_TRACE_INIT(buffer, tlevel) #endif -/* - * The trace macro. This is active only if ATK_TRACE_ENABLED is set. - */ +/*The trace macro. This is active only if ATK_TRACE_ENABLED is set. */ #if ATK_TRACE_ENABLED #define SXG_TRACE(tdriver, buffer, tlevel, tname, a1, a2, a3, a4) { \ if ((buffer) && ((buffer)->level >= (tlevel))) { \ diff --git a/drivers/staging/sxg/sxghif.h b/drivers/staging/sxg/sxghif.h index ac34072e986e..fe9a0808e897 100644 --- a/drivers/staging/sxg/sxghif.h +++ b/drivers/staging/sxg/sxghif.h @@ -1,4 +1,4 @@ -/* +/******************************************************************* * Copyright © 1997-2007 Alacritech, Inc. All rights reserved * * $Id: sxghif.h,v 1.5 2008/07/24 19:18:22 chris Exp $ @@ -7,132 +7,132 @@ * * This file contains structures and definitions for the * Alacritech Sahara host interface - */ + ******************************************************************/ -/******************************************************************************* - * UCODE Registers - *******************************************************************************/ +/* UCODE Registers */ struct sxg_ucode_regs { - // Address 0 - 0x3F = Command codes 0-15 for TCB 0. Excode 0 - u32 Icr; // Code = 0 (extended), ExCode = 0 - Int control - u32 RsvdReg1; // Code = 1 - TOE -NA - u32 RsvdReg2; // Code = 2 - TOE -NA - u32 RsvdReg3; // Code = 3 - TOE -NA - u32 RsvdReg4; // Code = 4 - TOE -NA - u32 RsvdReg5; // Code = 5 - TOE -NA - u32 CardUp; // Code = 6 - Microcode initialized when 1 - u32 RsvdReg7; // Code = 7 - TOE -NA - u32 ConfigStat; // Code = 8 - Configuration data load status - u32 RsvdReg9; // Code = 9 - TOE -NA - u32 CodeNotUsed[6]; // Codes 10-15 not used. ExCode = 0 - // This brings us to ExCode 1 at address 0x40 = Interrupt status pointer - u32 Isp; // Code = 0 (extended), ExCode = 1 - u32 PadEx1[15]; // Codes 1-15 not used with extended codes - // ExCode 2 = Interrupt Status Register - u32 Isr; // Code = 0 (extended), ExCode = 2 + /* Address 0 - 0x3F = Command codes 0-15 for TCB 0. Excode 0 */ + u32 Icr; /* Code = 0 (extended), ExCode = 0 - Int control */ + u32 RsvdReg1; /* Code = 1 - TOE -NA */ + u32 RsvdReg2; /* Code = 2 - TOE -NA */ + u32 RsvdReg3; /* Code = 3 - TOE -NA */ + u32 RsvdReg4; /* Code = 4 - TOE -NA */ + u32 RsvdReg5; /* Code = 5 - TOE -NA */ + u32 CardUp; /* Code = 6 - Microcode initialized when 1 */ + u32 RsvdReg7; /* Code = 7 - TOE -NA */ + u32 ConfigStat; /* Code = 8 - Configuration data load status */ + u32 RsvdReg9; /* Code = 9 - TOE -NA */ + u32 CodeNotUsed[6]; /* Codes 10-15 not used. ExCode = 0 */ + /* This brings us to ExCode 1 at address 0x40 = Interrupt status pointer */ + u32 Isp; /* Code = 0 (extended), ExCode = 1 */ + u32 PadEx1[15]; /* Codes 1-15 not used with extended codes */ + /* ExCode 2 = Interrupt Status Register */ + u32 Isr; /* Code = 0 (extended), ExCode = 2 */ u32 PadEx2[15]; - // ExCode 3 = Event base register. Location of event rings - u32 EventBase; // Code = 0 (extended), ExCode = 3 + /* ExCode 3 = Event base register. Location of event rings */ + u32 EventBase; /* Code = 0 (extended), ExCode = 3 */ u32 PadEx3[15]; - // ExCode 4 = Event ring size - u32 EventSize; // Code = 0 (extended), ExCode = 4 + /* ExCode 4 = Event ring size */ + u32 EventSize; /* Code = 0 (extended), ExCode = 4 */ u32 PadEx4[15]; - // ExCode 5 = TCB Buffers base address - u32 TcbBase; // Code = 0 (extended), ExCode = 5 + /* ExCode 5 = TCB Buffers base address */ + u32 TcbBase; /* Code = 0 (extended), ExCode = 5 */ u32 PadEx5[15]; - // ExCode 6 = TCB Composite Buffers base address - u32 TcbCompBase; // Code = 0 (extended), ExCode = 6 + /* ExCode 6 = TCB Composite Buffers base address */ + u32 TcbCompBase; /* Code = 0 (extended), ExCode = 6 */ u32 PadEx6[15]; - // ExCode 7 = Transmit ring base address - u32 XmtBase; // Code = 0 (extended), ExCode = 7 + /* ExCode 7 = Transmit ring base address */ + u32 XmtBase; /* Code = 0 (extended), ExCode = 7 */ u32 PadEx7[15]; - // ExCode 8 = Transmit ring size - u32 XmtSize; // Code = 0 (extended), ExCode = 8 + /* ExCode 8 = Transmit ring size */ + u32 XmtSize; /* Code = 0 (extended), ExCode = 8 */ u32 PadEx8[15]; - // ExCode 9 = Receive ring base address - u32 RcvBase; // Code = 0 (extended), ExCode = 9 + /* ExCode 9 = Receive ring base address */ + u32 RcvBase; /* Code = 0 (extended), ExCode = 9 */ u32 PadEx9[15]; - // ExCode 10 = Receive ring size - u32 RcvSize; // Code = 0 (extended), ExCode = 10 + /* ExCode 10 = Receive ring size */ + u32 RcvSize; /* Code = 0 (extended), ExCode = 10 */ u32 PadEx10[15]; - // ExCode 11 = Read EEPROM/Flash Config - u32 Config; // Code = 0 (extended), ExCode = 11 + /* ExCode 11 = Read EEPROM/Flash Config */ + u32 Config; /* Code = 0 (extended), ExCode = 11 */ u32 PadEx11[15]; - // ExCode 12 = Multicast bits 31:0 - u32 McastLow; // Code = 0 (extended), ExCode = 12 + /* ExCode 12 = Multicast bits 31:0 */ + u32 McastLow; /* Code = 0 (extended), ExCode = 12 */ u32 PadEx12[15]; - // ExCode 13 = Multicast bits 63:32 - u32 McastHigh; // Code = 0 (extended), ExCode = 13 + /* ExCode 13 = Multicast bits 63:32 */ + u32 McastHigh; /* Code = 0 (extended), ExCode = 13 */ u32 PadEx13[15]; - // ExCode 14 = Ping - u32 Ping; // Code = 0 (extended), ExCode = 14 + /* ExCode 14 = Ping */ + u32 Ping; /* Code = 0 (extended), ExCode = 14 */ u32 PadEx14[15]; - // ExCode 15 = Link MTU - u32 LinkMtu; // Code = 0 (extended), ExCode = 15 + /* ExCode 15 = Link MTU */ + u32 LinkMtu; /* Code = 0 (extended), ExCode = 15 */ u32 PadEx15[15]; - // ExCode 16 = Download synchronization - u32 LoadSync; // Code = 0 (extended), ExCode = 16 + /* ExCode 16 = Download synchronization */ + u32 LoadSync; /* Code = 0 (extended), ExCode = 16 */ u32 PadEx16[15]; - // ExCode 17 = Upper DRAM address bits on 32-bit systems - u32 Upper; // Code = 0 (extended), ExCode = 17 + /* ExCode 17 = Upper DRAM address bits on 32-bit systems */ + u32 Upper; /* Code = 0 (extended), ExCode = 17 */ u32 PadEx17[15]; - // ExCode 18 = Slowpath Send Index Address - u32 SPSendIndex; // Code = 0 (extended), ExCode = 18 + /* ExCode 18 = Slowpath Send Index Address */ + u32 SPSendIndex; /* Code = 0 (extended), ExCode = 18 */ u32 PadEx18[15]; - // ExCode 19 = Get ucode statistics - u32 GetUcodeStats; // Code = 0 (extended), ExCode = 19 + /* ExCode 19 = Get ucode statistics */ + u32 GetUcodeStats; /* Code = 0 (extended), ExCode = 19 */ u32 PadEx19[15]; - // ExCode 20 = Aggregation - See sxgmisc.c:SxgSetInterruptAggregation - u32 Aggregation; // Code = 0 (extended), ExCode = 20 + /* ExCode 20 = Aggregation - See sxgmisc.c:SxgSetInterruptAggregation */ + u32 Aggregation; /* Code = 0 (extended), ExCode = 20 */ u32 PadEx20[15]; - // ExCode 21 = Receive MDL push timer - u32 PushTicks; // Code = 0 (extended), ExCode = 21 + /* ExCode 21 = Receive MDL push timer */ + u32 PushTicks; /* Code = 0 (extended), ExCode = 21 */ u32 PadEx21[15]; - // ExCode 22 = ACK Frequency - u32 AckFrequency; // Code = 0 (extended), ExCode = 22 + /* ExCode 22 = ACK Frequency */ + u32 AckFrequency; /* Code = 0 (extended), ExCode = 22 */ u32 PadEx22[15]; - // ExCode 23 = TOE NA + /* ExCode 23 = TOE NA */ u32 RsvdReg23; u32 PadEx23[15]; - // ExCode 24 = TOE NA + /* ExCode 24 = TOE NA */ u32 RsvdReg24; u32 PadEx24[15]; - // ExCode 25 = TOE NA - u32 RsvdReg25; // Code = 0 (extended), ExCode = 25 + /* ExCode 25 = TOE NA */ + u32 RsvdReg25; /* Code = 0 (extended), ExCode = 25 */ u32 PadEx25[15]; - // ExCode 26 = Receive checksum requirements - u32 ReceiveChecksum; // Code = 0 (extended), ExCode = 26 + /* ExCode 26 = Receive checksum requirements */ + u32 ReceiveChecksum; /* Code = 0 (extended), ExCode = 26 */ u32 PadEx26[15]; - // ExCode 27 = RSS Requirements - u32 Rss; // Code = 0 (extended), ExCode = 27 + /* ExCode 27 = RSS Requirements */ + u32 Rss; /* Code = 0 (extended), ExCode = 27 */ u32 PadEx27[15]; - // ExCode 28 = RSS Table - u32 RssTable; // Code = 0 (extended), ExCode = 28 + /* ExCode 28 = RSS Table */ + u32 RssTable; /* Code = 0 (extended), ExCode = 28 */ u32 PadEx28[15]; - // ExCode 29 = Event ring release entries - u32 EventRelease; // Code = 0 (extended), ExCode = 29 + /* ExCode 29 = Event ring release entries */ + u32 EventRelease; /* Code = 0 (extended), ExCode = 29 */ u32 PadEx29[15]; - // ExCode 30 = Number of receive bufferlist commands on ring 0 - u32 RcvCmd; // Code = 0 (extended), ExCode = 30 + /* ExCode 30 = Number of receive bufferlist commands on ring 0 */ + u32 RcvCmd; /* Code = 0 (extended), ExCode = 30 */ u32 PadEx30[15]; - // ExCode 31 = slowpath transmit command - Data[31:0] = 1 - u32 XmtCmd; // Code = 0 (extended), ExCode = 31 + /* ExCode 31 = slowpath transmit command - Data[31:0] = 1 */ + u32 XmtCmd; /* Code = 0 (extended), ExCode = 31 */ u32 PadEx31[15]; - // ExCode 32 = Dump command - u32 DumpCmd; // Code = 0 (extended), ExCode = 32 + /* ExCode 32 = Dump command */ + u32 DumpCmd; /* Code = 0 (extended), ExCode = 32 */ u32 PadEx32[15]; - // ExCode 33 = Debug command - u32 DebugCmd; // Code = 0 (extended), ExCode = 33 + /* ExCode 33 = Debug command */ + u32 DebugCmd; /* Code = 0 (extended), ExCode = 33 */ u32 PadEx33[15]; - // There are 128 possible extended commands - each of account for 16 - // words (including the non-relevent base command codes 1-15). - // Pad for the remainder of these here to bring us to the next CPU - // base. As extended codes are added, reduce the first array value in - // the following field - u32 PadToNextCpu[94][16]; // 94 = 128 - 34 (34 = Excodes 0 - 33) + /* + * There are 128 possible extended commands - each of account for 16 + * words (including the non-relevent base command codes 1-15). + * Pad for the remainder of these here to bring us to the next CPU + * base. As extended codes are added, reduce the first array value in + * the following field + */ + u32 PadToNextCpu[94][16]; /* 94 = 128 - 34 (34 = Excodes 0 - 33) */ }; -// Interrupt control register (0) values +/* Interrupt control register (0) values */ #define SXG_ICR_DISABLE 0x00000000 #define SXG_ICR_ENABLE 0x00000001 #define SXG_ICR_MASK 0x00000002 @@ -142,36 +142,39 @@ struct sxg_ucode_regs { ((((_MessageId) << SXG_ICR_MSGID_SHIFT) & \ SXG_ICR_MSGID_MASK) | (_Data)) -#define SXG_MIN_AGG_DEFAULT 0x0010 // Minimum aggregation default -#define SXG_MAX_AGG_DEFAULT 0x0040 // Maximum aggregation default -#define SXG_MAX_AGG_SHIFT 16 // Maximum in top 16 bits of register -#define SXG_AGG_XMT_DISABLE 0x80000000 // Disable interrupt aggregation on xmt +#define SXG_MIN_AGG_DEFAULT 0x0010 /* Minimum aggregation default */ +#define SXG_MAX_AGG_DEFAULT 0x0040 /* Maximum aggregation default */ +#define SXG_MAX_AGG_SHIFT 16 /* Maximum in top 16 bits of register */ +#define SXG_AGG_XMT_DISABLE 0x80000000 /* Disable interrupt aggregation on xmt */ -// The Microcode supports up to 8 RSS queues +/* The Microcode supports up to 8 RSS queues */ #define SXG_MAX_RSS 8 -#define SXG_MAX_RSS_TABLE_SIZE 256 // 256-byte max +#define SXG_MAX_RSS_TABLE_SIZE 256 /* 256-byte max */ + +#define SXG_RSS_TCP6 0x00000001 /* RSS TCP over IPv6 */ +#define SXG_RSS_TCP4 0x00000002 /* RSS TCP over IPv4 */ +#define SXG_RSS_LEGACY 0x00000004 /* Line-base interrupts */ +#define SXG_RSS_TABLE_SIZE 0x0000FF00 /* Table size mask */ -#define SXG_RSS_TCP6 0x00000001 // RSS TCP over IPv6 -#define SXG_RSS_TCP4 0x00000002 // RSS TCP over IPv4 -#define SXG_RSS_LEGACY 0x00000004 // Line-base interrupts -#define SXG_RSS_TABLE_SIZE 0x0000FF00 // Table size mask #define SXG_RSS_TABLE_SHIFT 8 -#define SXG_RSS_BASE_CPU 0x00FF0000 // Base CPU (not used) +#define SXG_RSS_BASE_CPU 0x00FF0000 /* Base CPU (not used) */ #define SXG_RSS_BASE_SHIFT 16 -#define SXG_RCV_IP_CSUM_ENABLED 0x00000001 // ExCode 26 (ReceiveChecksum) -#define SXG_RCV_TCP_CSUM_ENABLED 0x00000002 // ExCode 26 (ReceiveChecksum) +#define SXG_RCV_IP_CSUM_ENABLED 0x00000001 /* ExCode 26 (ReceiveChecksum) */ +#define SXG_RCV_TCP_CSUM_ENABLED 0x00000002 /* ExCode 26 (ReceiveChecksum) */ #define SXG_XMT_CPUID_SHIFT 16 -// Status returned by ucode in the ConfigStat reg (see above) when attempted -// to load configuration data from the EEPROM/Flash. -#define SXG_CFG_TIMEOUT 1 // init value - timeout if unchanged -#define SXG_CFG_LOAD_EEPROM 2 // config data loaded from EEPROM -#define SXG_CFG_LOAD_FLASH 3 // config data loaded from flash -#define SXG_CFG_LOAD_INVALID 4 // no valid config data found -#define SXG_CFG_LOAD_ERROR 5 // hardware error +/* + * Status returned by ucode in the ConfigStat reg (see above) when attempted + * to load configuration data from the EEPROM/Flash. + */ +#define SXG_CFG_TIMEOUT 1 /* init value - timeout if unchanged */ +#define SXG_CFG_LOAD_EEPROM 2 /* config data loaded from EEPROM */ +#define SXG_CFG_LOAD_FLASH 3 /* config data loaded from flash */ +#define SXG_CFG_LOAD_INVALID 4 /* no valid config data found */ +#define SXG_CFG_LOAD_ERROR 5 /* hardware error */ #define SXG_CHECK_FOR_HANG_TIME 5 @@ -220,29 +223,26 @@ struct sxg_tcb_regs { * ||---|-CpuId of crash * |----/ ***************************************************************************/ -#define SXG_ISR_ERR 0x80000000 // Error -#define SXG_ISR_EVENT 0x40000000 // Event ring event -#define SXG_ISR_NONE1 0x20000000 // Not used -#define SXG_ISR_UPC 0x10000000 // Dump/debug command complete -#define SXG_ISR_LINK 0x08000000 // Link event -#define SXG_ISR_PDQF 0x04000000 // Processed data queue full -#define SXG_ISR_RMISS 0x02000000 // Drop - no host buf -#define SXG_ISR_BREAK 0x01000000 // Breakpoint hit -#define SXG_ISR_PING 0x00800000 // Heartbeat response -#define SXG_ISR_DEAD 0x00400000 // Card crash -#define SXG_ISR_ERFULL 0x00200000 // Event ring full -#define SXG_ISR_XDROP 0x00100000 // XMT Drop - no DRAM bufs or XMT err -#define SXG_ISR_SPSEND 0x00080000 // Slow send complete -#define SXG_ISR_CPU 0x00070000 // Dead CPU mask -#define SXG_ISR_CPU_SHIFT 16 // Dead CPU shift -#define SXG_ISR_CRASH 0x0000FFFF // Crash address mask +#define SXG_ISR_ERR 0x80000000 /* Error */ +#define SXG_ISR_EVENT 0x40000000 /* Event ring event */ +#define SXG_ISR_NONE1 0x20000000 /* Not used */ +#define SXG_ISR_UPC 0x10000000 /* Dump/debug command complete */ +#define SXG_ISR_LINK 0x08000000 /* Link event */ +#define SXG_ISR_PDQF 0x04000000 /* Processed data queue full */ +#define SXG_ISR_RMISS 0x02000000 /* Drop - no host buf */ +#define SXG_ISR_BREAK 0x01000000 /* Breakpoint hit */ +#define SXG_ISR_PING 0x00800000 /* Heartbeat response */ +#define SXG_ISR_DEAD 0x00400000 /* Card crash */ +#define SXG_ISR_ERFULL 0x00200000 /* Event ring full */ +#define SXG_ISR_XDROP 0x00100000 /* XMT Drop - no DRAM bufs or XMT err */ +#define SXG_ISR_SPSEND 0x00080000 /* Slow send complete */ +#define SXG_ISR_CPU 0x00070000 /* Dead CPU mask */ +#define SXG_ISR_CPU_SHIFT 16 /* Dead CPU shift */ +#define SXG_ISR_CRASH 0x0000FFFF /* Crash address mask */ /*************************************************************************** - * * Event Ring entry * - ***************************************************************************/ -/* * 31 15 0 * .___________________.___________________. * |<------------ Pad 0 ------------>| @@ -284,80 +284,80 @@ struct sxg_tcb_regs { * ||------- ISTCPIP * |-------- SCERR * - */ + ************************************************************************/ #pragma pack(push, 1) struct sxg_event { - u32 Pad[1]; // not used - u32 SndUna; // SndUna value - u32 Resid; // receive MDL resid + u32 Pad[1]; /* not used */ + u32 SndUna; /* SndUna value */ + u32 Resid; /* receive MDL resid */ union { - void *HostHandle; // Receive host handle - u32 Rsvd1; // TOE NA + void * HostHandle; /* Receive host handle */ + u32 Rsvd1; /* TOE NA */ struct { u32 NotUsed; - u32 Rsvd2; // TOE NA + u32 Rsvd2; /* TOE NA */ } Flush; }; - u32 Toeplitz; // RSS Toeplitz hash + u32 Toeplitz; /* RSS Toeplitz hash */ union { - ushort Rsvd3; // TOE NA - ushort HdrOffset; // Slowpath + ushort Rsvd3; /* TOE NA */ + ushort HdrOffset; /* Slowpath */ }; - ushort Length; // - unsigned char Rsvd4; // TOE NA - unsigned char Code; // Event code - unsigned char CommandIndex; // New ring index - unsigned char Status; // Event status + ushort Length; + unsigned char Rsvd4; /* TOE NA */ + unsigned char Code; /* Event code */ + unsigned char CommandIndex; /* New ring index */ + unsigned char Status; /* Event status */ }; #pragma pack(pop) -// Event code definitions -#define EVENT_CODE_BUFFERS 0x01 // Receive buffer list command (ring 0) -#define EVENT_CODE_SLOWRCV 0x02 // Slowpath receive -#define EVENT_CODE_UNUSED 0x04 // Was slowpath commands complete - -// Status values -#define EVENT_STATUS_VALID 0x80 // Entry valid - -// Slowpath status -#define EVENT_STATUS_ERROR 0x40 // Completed with error. Index in next byte -#define EVENT_STATUS_TCPIP4 0x20 // TCPIPv4 frame -#define EVENT_STATUS_TCPBAD 0x10 // Bad TCP checksum -#define EVENT_STATUS_IPBAD 0x08 // Bad IP checksum -#define EVENT_STATUS_RCVERR 0x04 // Slowpath receive error -#define EVENT_STATUS_IPONLY 0x02 // IP frame -#define EVENT_STATUS_TCPIP6 0x01 // TCPIPv6 frame -#define EVENT_STATUS_TCPIP 0x21 // Combination of v4 and v6 - -// Event ring -// Size must be power of 2, between 128 and 16k -#define EVENT_RING_SIZE 4096 // ?? -#define EVENT_RING_BATCH 16 // Hand entries back 16 at a time. -#define EVENT_BATCH_LIMIT 256 // Stop processing events after 4096 (256 * 16) +/* Event code definitions */ +#define EVENT_CODE_BUFFERS 0x01 /* Receive buffer list command (ring 0) */ +#define EVENT_CODE_SLOWRCV 0x02 /* Slowpath receive */ +#define EVENT_CODE_UNUSED 0x04 /* Was slowpath commands complete */ + +/* Status values */ +#define EVENT_STATUS_VALID 0x80 /* Entry valid */ + +/* Slowpath status */ +#define EVENT_STATUS_ERROR 0x40 /* Completed with error. Index in next byte */ +#define EVENT_STATUS_TCPIP4 0x20 /* TCPIPv4 frame */ +#define EVENT_STATUS_TCPBAD 0x10 /* Bad TCP checksum */ +#define EVENT_STATUS_IPBAD 0x08 /* Bad IP checksum */ +#define EVENT_STATUS_RCVERR 0x04 /* Slowpath receive error */ +#define EVENT_STATUS_IPONLY 0x02 /* IP frame */ +#define EVENT_STATUS_TCPIP6 0x01 /* TCPIPv6 frame */ +#define EVENT_STATUS_TCPIP 0x21 /* Combination of v4 and v6 */ + +/* + * Event ring + * Size must be power of 2, between 128 and 16k + */ +#define EVENT_RING_SIZE 4096 +#define EVENT_RING_BATCH 16 /* Hand entries back 16 at a time. */ +#define EVENT_BATCH_LIMIT 256 /* Stop processing events after 4096 (256 * 16) */ struct sxg_event_ring { struct sxg_event Ring[EVENT_RING_SIZE]; }; -/*************************************************************************** - * - * TCB Buffers - * - ***************************************************************************/ -// Maximum number of TCBS supported by hardware/microcode +/* TCB Buffers */ +/* Maximum number of TCBS supported by hardware/microcode */ #define SXG_MAX_TCB 4096 -// Minimum TCBs before we fail initialization +/* Minimum TCBs before we fail initialization */ #define SXG_MIN_TCB 512 -// TCB Hash -// The bucket is determined by bits 11:4 of the toeplitz if we support 4k -// offloaded connections, 10:4 if we support 2k and so on. +/* + * TCB Hash + * The bucket is determined by bits 11:4 of the toeplitz if we support 4k + * offloaded connections, 10:4 if we support 2k and so on. + */ #define SXG_TCB_BUCKET_SHIFT 4 #define SXG_TCB_PER_BUCKET 16 -#define SXG_TCB_BUCKET_MASK 0xFF0 // Bucket portion of TCB ID -#define SXG_TCB_ELEMENT_MASK 0x00F // Element within bucket -#define SXG_TCB_BUCKETS 256 // 256 * 16 = 4k +#define SXG_TCB_BUCKET_MASK 0xFF0 /* Bucket portion of TCB ID */ +#define SXG_TCB_ELEMENT_MASK 0x00F /* Element within bucket */ +#define SXG_TCB_BUCKETS 256 /* 256 * 16 = 4k */ -#define SXG_TCB_BUFFER_SIZE 512 // ASSERT format is correct +#define SXG_TCB_BUFFER_SIZE 512 /* ASSERT format is correct */ #define SXG_TCB_RCVQ_SIZE 736 @@ -383,12 +383,14 @@ struct sxg_event_ring { &(_TcpObject)->CompBuffer->Frame.NoVlan.TcpIp6.Ip #if DBG -// Horrible kludge to distinguish dumb-nic, slowpath, and -// fastpath traffic. Decrement the HopLimit by one -// for slowpath, two for fastpath. This assumes the limit is measurably -// greater than two, which I think is reasonable. -// Obviously this is DBG only. Maybe remove later, or #if 0 so we -// can set it when needed +/* + * Horrible kludge to distinguish dumb-nic, slowpath, and + * fastpath traffic. Decrement the HopLimit by one + * for slowpath, two for fastpath. This assumes the limit is measurably + * greater than two, which I think is reasonable. + * Obviously this is DBG only. Maybe remove later, or #if 0 so we + * can set it when needed + */ #define SXG_DBG_HOP_LIMIT(_TcpObject, _FastPath) { \ PIPV6_HDR _Ip6FrameHdr; \ if((_TcpObject)->IPv6) { \ @@ -401,24 +403,22 @@ struct sxg_event_ring { } \ } #else -// Do nothing with free build +/* Do nothing with free build */ #define SXG_DBG_HOP_LIMIT(_TcpObject, _FastPath) #endif -/*************************************************************************** - * Receive and transmit rings - ***************************************************************************/ +/* Receive and transmit rings */ #define SXG_MAX_RING_SIZE 256 -#define SXG_XMT_RING_SIZE 128 // Start with 128 -#define SXG_RCV_RING_SIZE 128 // Start with 128 +#define SXG_XMT_RING_SIZE 128 /* Start with 128 */ +#define SXG_RCV_RING_SIZE 128 /* Start with 128 */ #define SXG_MAX_ENTRIES 4096 -// Structure and macros to manage a ring +/* Structure and macros to manage a ring */ struct sxg_ring_info { - unsigned char Head; // Where we add entries - Note unsigned char:RING_SIZE - unsigned char Tail; // Where we pull off completed entries - ushort Size; // Ring size - Must be multiple of 2 - void *Context[SXG_MAX_RING_SIZE]; // Shadow ring + unsigned char Head; /* Where we add entries - Note unsigned char:RING_SIZE */ + unsigned char Tail; /* Where we pull off completed entries */ + ushort Size; /* Ring size - Must be multiple of 2 */ + void * Context[SXG_MAX_RING_SIZE]; /* Shadow ring */ }; #define SXG_INITIALIZE_RING(_ring, _size) { \ @@ -437,9 +437,11 @@ struct sxg_ring_info { ASSERT((_ring)->Tail != (_ring)->Head); \ SXG_ADVANCE_INDEX((_ring)->Tail, ((_ring)->Size)); \ } -// Set cmd to the next available ring entry, set the shadow context -// entry and advance the ring. -// The appropriate lock must be held when calling this macro +/* + * Set cmd to the next available ring entry, set the shadow context + * entry and advance the ring. + * The appropriate lock must be held when calling this macro + */ #define SXG_GET_CMD(_ring, _ringinfo, _cmd, _context) { \ if(SXG_RING_FULL(_ringinfo)) { \ (_cmd) = NULL; \ @@ -450,17 +452,21 @@ struct sxg_ring_info { } \ } -// Abort the previously allocated command by retreating the head. -// NOTE - The appopriate lock MUST NOT BE DROPPED between the SXG_GET_CMD -// and SXG_ABORT_CMD calls. +/* + * Abort the previously allocated command by retreating the head. + * NOTE - The appopriate lock MUST NOT BE DROPPED between the SXG_GET_CMD + * and SXG_ABORT_CMD calls. + */ #define SXG_ABORT_CMD(_ringinfo) { \ ASSERT(!(SXG_RING_EMPTY(_ringinfo))); \ SXG_RING_RETREAT_HEAD(_ringinfo); \ (_ringinfo)->Context[(_ringinfo)->Head] = NULL; \ } -// For the given ring, return a pointer to the tail cmd and context, -// clear the context and advance the tail +/* + * For the given ring, return a pointer to the tail cmd and context, + * clear the context and advance the tail + */ #define SXG_RETURN_CMD(_ring, _ringinfo, _cmd, _context) { \ (_cmd) = &(_ring)->Descriptors[(_ringinfo)->Tail]; \ (_context) = (_ringinfo)->Context[(_ringinfo)->Tail]; \ @@ -468,12 +474,9 @@ struct sxg_ring_info { SXG_RING_ADVANCE_TAIL(_ringinfo); \ } -/*************************************************************************** - * +/*************************************************************** * Host Command Buffer - commands to INIC via the Cmd Rings * - ***************************************************************************/ -/* * 31 15 0 * .___________________.___________________. * |<-------------- Sgl Low -------------->| @@ -493,42 +496,42 @@ struct sxg_ring_info { * |_________|_________|_________|_________|24 0x18 * |<----- LCnt ------>|<----- Flags ----->| * |_________|_________|_________|_________|28 0x1c - */ + ****************************************************************/ #pragma pack(push, 1) struct sxg_cmd { - dma_addr_t Sgl; // Physical address of SGL + dma_addr_t Sgl; /* Physical address of SGL */ union { struct { - dma64_addr_t FirstSgeAddress; // Address of first SGE - u32 FirstSgeLength; // Length of first SGE + dma64_addr_t FirstSgeAddress; /* Address of first SGE */ + u32 FirstSgeLength; /* Length of first SGE */ union { - u32 Rsvd1; // TOE NA - u32 SgeOffset; // Slowpath - 2nd SGE offset - u32 Resid; // MDL completion - clobbers update + u32 Rsvd1; /* TOE NA */ + u32 SgeOffset; /* Slowpath - 2nd SGE offset */ + u32 Resid; /* MDL completion - clobbers update */ }; union { - u32 TotalLength; // Total transfer length - u32 Mss; // LSO MSS + u32 TotalLength; /* Total transfer length */ + u32 Mss; /* LSO MSS */ }; } Buffer; }; union { struct { - unsigned char Flags:4; // slowpath flags - unsigned char IpHl:4; // Ip header length (>>2) - unsigned char MacLen; // Mac header len + unsigned char Flags:4; /* slowpath flags */ + unsigned char IpHl:4; /* Ip header length (>>2) */ + unsigned char MacLen; /* Mac header len */ } CsumFlags; struct { - ushort Flags:4; // slowpath flags - ushort TcpHdrOff:7; // TCP - ushort MacLen:5; // Mac header len + ushort Flags:4; /* slowpath flags */ + ushort TcpHdrOff:7; /* TCP */ + ushort MacLen:5; /* Mac header len */ } LsoFlags; - ushort Flags; // flags + ushort Flags; /* flags */ }; union { - ushort SgEntries; // SG entry count including first sge + ushort SgEntries; /* SG entry count including first sge */ struct { - unsigned char Status; // Copied from event status + unsigned char Status; /* Copied from event status */ unsigned char NotUsed; } Status; }; @@ -542,7 +545,7 @@ struct vlan_hdr { }; #pragma pack(pop) -/* +/******************************************************************** * Slowpath Flags: * * @@ -572,11 +575,11 @@ struct vlan_hdr { * | LCnt |MAC hlen |Hlen|Flgs| * |___________________|____|____|____|____| * - */ -// Slowpath CMD flags -#define SXG_SLOWCMD_CSUM_IP 0x01 // Checksum IP -#define SXG_SLOWCMD_CSUM_TCP 0x02 // Checksum TCP -#define SXG_SLOWCMD_LSO 0x04 // Large segment send + *****************************************************************/ +/* Slowpath CMD flags */ +#define SXG_SLOWCMD_CSUM_IP 0x01 /* Checksum IP */ +#define SXG_SLOWCMD_CSUM_TCP 0x02 /* Checksum TCP */ +#define SXG_SLOWCMD_LSO 0x04 /* Large segment send */ struct sxg_xmt_ring { struct sxg_cmd Descriptors[SXG_XMT_RING_SIZE]; @@ -586,22 +589,22 @@ struct sxg_rcv_ring { struct sxg_cmd Descriptors[SXG_RCV_RING_SIZE]; }; -/*************************************************************************** +/* * Share memory buffer types - Used to identify asynchronous * shared memory allocation - ***************************************************************************/ + */ enum sxg_buffer_type { - SXG_BUFFER_TYPE_RCV, // Receive buffer - SXG_BUFFER_TYPE_SGL // SGL buffer + SXG_BUFFER_TYPE_RCV, /* Receive buffer */ + SXG_BUFFER_TYPE_SGL /* SGL buffer */ }; -// State for SXG buffers +/* State for SXG buffers */ #define SXG_BUFFER_FREE 0x01 #define SXG_BUFFER_BUSY 0x02 #define SXG_BUFFER_ONCARD 0x04 #define SXG_BUFFER_UPSTREAM 0x08 -/*************************************************************************** +/* * Receive data buffers * * Receive data buffers are given to the Sahara card 128 at a time. @@ -677,67 +680,71 @@ enum sxg_buffer_type { * + struct sxg_rcv_block_hdr = ~32 * => Total = ~1282k/block * - ***************************************************************************/ -#define SXG_RCV_DATA_BUFFERS 8192 // Amount to give to the card -#define SXG_INITIAL_RCV_DATA_BUFFERS 16384 // Initial pool of buffers -#define SXG_MIN_RCV_DATA_BUFFERS 4096 // Minimum amount and when to get more -#define SXG_MAX_RCV_BLOCKS 256 // = 32k receive buffers + */ +#define SXG_RCV_DATA_BUFFERS 8192 /* Amount to give to the card */ +#define SXG_INITIAL_RCV_DATA_BUFFERS 16384 /* Initial pool of buffers */ +#define SXG_MIN_RCV_DATA_BUFFERS 4096 /* Minimum amount and when to get more */ +#define SXG_MAX_RCV_BLOCKS 256 /* = 32k receive buffers */ -// Receive buffer header +/* Receive buffer header */ struct sxg_rcv_data_buffer_hdr { - dma_addr_t PhysicalAddress; // Buffer physical address - // Note - DO NOT USE the VirtualAddress field to locate data. - // Use the sxg.h:SXG_RECEIVE_DATA_LOCATION macro instead. - void *VirtualAddress; // Start of buffer - u32 Size; // Buffer size - struct sxg_rcv_data_buffer_hdr *Next; // Fastpath data buffer queue - struct list_entry FreeList; // Free queue of buffers - unsigned char State; // See SXG_BUFFER state above - unsigned char Status; // Event status (to log PUSH) - struct sk_buff *skb; // Double mapped (nbl and pkt) + dma_addr_t PhysicalAddress; /* Buffer physical address */ + /* + * Note - DO NOT USE the VirtualAddress field to locate data. + * Use the sxg.h:SXG_RECEIVE_DATA_LOCATION macro instead. + */ + void *VirtualAddress; /* Start of buffer */ + u32 Size; /* Buffer size */ + struct sxg_rcv_data_buffer_hdr *Next; /* Fastpath data buffer queue */ + struct list_entry FreeList; /* Free queue of buffers */ + unsigned char State; /* See SXG_BUFFER state above */ + unsigned char Status; /* Event status (to log PUSH) */ + struct sk_buff * skb; /* Double mapped (nbl and pkt) */ }; -// SxgSlowReceive uses the PACKET (skb) contained -// in the struct sxg_rcv_data_buffer_hdr when indicating dumb-nic data +/* + * SxgSlowReceive uses the PACKET (skb) contained + * in the struct sxg_rcv_data_buffer_hdr when indicating dumb-nic data + */ #define SxgDumbRcvPacket skb -#define SXG_RCV_DATA_HDR_SIZE 256 // Space for struct sxg_rcv_data_buffer_hdr -#define SXG_RCV_DATA_BUFFER_SIZE 2048 // Non jumbo = 2k including HDR -#define SXG_RCV_JUMBO_BUFFER_SIZE 10240 // jumbo = 10k including HDR +#define SXG_RCV_DATA_HDR_SIZE 256 /* Space for struct sxg_rcv_data_buffer_hdr */ +#define SXG_RCV_DATA_BUFFER_SIZE 2048 /* Non jumbo = 2k including HDR */ +#define SXG_RCV_JUMBO_BUFFER_SIZE 10240 /* jumbo = 10k including HDR */ -// Receive data descriptor +/* Receive data descriptor */ struct sxg_rcv_data_descriptor { union { - struct sk_buff *VirtualAddress; // Host handle - u64 ForceTo8Bytes; // Force x86 to 8-byte boundary + struct sk_buff *VirtualAddress; /* Host handle */ + u64 ForceTo8Bytes; /* Force x86 to 8-byte boundary */ }; dma_addr_t PhysicalAddress; }; -// Receive descriptor block +/* Receive descriptor block */ #define SXG_RCV_DESCRIPTORS_PER_BLOCK 128 -#define SXG_RCV_DESCRIPTOR_BLOCK_SIZE 2048 // For sanity check +#define SXG_RCV_DESCRIPTOR_BLOCK_SIZE 2048 /* For sanity check */ struct sxg_rcv_descriptor_block { struct sxg_rcv_data_descriptor Descriptors[SXG_RCV_DESCRIPTORS_PER_BLOCK]; }; -// Receive descriptor block header +/* Receive descriptor block header */ struct sxg_rcv_descriptor_block_hdr { - void *VirtualAddress; // Start of 2k buffer - dma_addr_t PhysicalAddress; // ..and it's physical address - struct list_entry FreeList; // Free queue of descriptor blocks - unsigned char State; // See SXG_BUFFER state above + void *VirtualAddress; /* start of 2k buffer */ + dma_addr_t PhysicalAddress; /* ..and it's physical address */ + struct list_entry FreeList; /* free queue of descriptor blocks */ + unsigned char State; /* see sxg_buffer state above */ }; -// Receive block header +/* Receive block header */ struct sxg_rcv_block_hdr { - void *VirtualAddress; // Start of virtual memory - dma_addr_t PhysicalAddress; // ..and it's physical address - struct list_entry AllList; // Queue of all SXG_RCV_BLOCKS + void *VirtualAddress; /* Start of virtual memory */ + dma_addr_t PhysicalAddress; /* ..and it's physical address */ + struct list_entry AllList; /* Queue of all SXG_RCV_BLOCKS */ }; -// Macros to determine data structure offsets into receive block +/* Macros to determine data structure offsets into receive block */ #define SXG_RCV_BLOCK_SIZE(_Buffersize) \ (((_Buffersize) * SXG_RCV_DESCRIPTORS_PER_BLOCK) + \ (sizeof(struct sxg_rcv_descriptor_block)) + \ @@ -757,61 +764,63 @@ struct sxg_rcv_block_hdr { (sizeof(struct sxg_rcv_descriptor_block)) + \ (sizeof(struct sxg_rcv_descriptor_block_hdr))) -/*************************************************************************** - * Scatter gather list buffer - ***************************************************************************/ -#define SXG_INITIAL_SGL_BUFFERS 8192 // Initial pool of SGL buffers -#define SXG_MIN_SGL_BUFFERS 2048 // Minimum amount and when to get more -#define SXG_MAX_SGL_BUFFERS 16384 // Maximum to allocate (note ADAPT:ushort) - -// SXG_SGL_POOL_PROPERTIES - This structure is used to define a pool of SGL buffers. -// These buffers are allocated out of shared memory and used to -// contain a physical scatter gather list structure that is shared -// with the card. -// -// We split our SGL buffers into multiple pools based on size. The motivation -// is that some applications perform very large I/Os (1MB for example), so -// we need to be able to allocate an SGL to accommodate such a request. -// But such an SGL would require 256 24-byte SG entries - ~6k. -// Given that the vast majority of I/Os are much smaller than 1M, allocating -// a single pool of SGL buffers would be a horribly inefficient use of -// memory. -// -// The following structure includes two fields relating to its size. -// The NBSize field specifies the largest NET_BUFFER that can be handled -// by the particular pool. The SGEntries field defines the size, in -// entries, of the SGL for that pool. The SGEntries is determined by -// dividing the NBSize by the expected page size (4k), and then padding -// it by some appropriate amount as insurance (20% or so..??). +/* Scatter gather list buffer */ +#define SXG_INITIAL_SGL_BUFFERS 8192 /* Initial pool of SGL buffers */ +#define SXG_MIN_SGL_BUFFERS 2048 /* Minimum amount and when to get more */ +#define SXG_MAX_SGL_BUFFERS 16384 /* Maximum to allocate (note ADAPT:ushort) */ + +/* + * SXG_SGL_POOL_PROPERTIES - This structure is used to define a pool of SGL buffers. + * These buffers are allocated out of shared memory and used to + * contain a physical scatter gather list structure that is shared + * with the card. + * + * We split our SGL buffers into multiple pools based on size. The motivation + * is that some applications perform very large I/Os (1MB for example), so + * we need to be able to allocate an SGL to accommodate such a request. + * But such an SGL would require 256 24-byte SG entries - ~6k. + * Given that the vast majority of I/Os are much smaller than 1M, allocating + * a single pool of SGL buffers would be a horribly inefficient use of + * memory. + * + * The following structure includes two fields relating to its size. + * The NBSize field specifies the largest NET_BUFFER that can be handled + * by the particular pool. The SGEntries field defines the size, in + * entries, of the SGL for that pool. The SGEntries is determined by + * dividing the NBSize by the expected page size (4k), and then padding + * it by some appropriate amount as insurance (20% or so..??). + */ struct sxg_sgl_pool_properties { - u32 NBSize; // Largest NET_BUFFER size for this pool - ushort SGEntries; // Number of entries in SGL - ushort InitialBuffers; // Number to allocate at initializationtime - ushort MinBuffers; // When to get more - ushort MaxBuffers; // When to stop - ushort PerCpuThreshold;// See sxgh.h:SXG_RESOURCES + u32 NBSize; /* Largest NET_BUFFER size for this pool */ + ushort SGEntries; /* Number of entries in SGL */ + ushort InitialBuffers; /* Number to allocate at initializationtime */ + ushort MinBuffers; /* When to get more */ + ushort MaxBuffers; /* When to stop */ + ushort PerCpuThreshold;/* See sxgh.h:SXG_RESOURCES */ }; -// At the moment I'm going to statically initialize 4 pools: -// 100k buffer pool: The vast majority of the expected buffers are expected to -// be less than or equal to 100k. At 30 entries per and -// 8k initial buffers amounts to ~4MB of memory -// NOTE - This used to be 64K with 20 entries, but during -// WHQL NDIS 6.0 Testing (2c_mini6stress) MS does their -// best to send absurd NBL's with ridiculous SGLs, we -// have received 400byte sends contained in SGL's that -// have 28 entries -// 1M buffer pool: Buffers between 64k and 1M. Allocate 256 initial buffers -// with 300 entries each => ~2MB of memory -// 5M buffer pool: Not expected often, if at all. 32 initial buffers -// at 1500 entries each => ~1MB of memory -// 10M buffer pool: Not expected at all, except under pathelogical conditions. -// Allocate one at initialization time. -// Note - 10M is the current limit of what we can -// realistically support due to the sahara SGL -// bug described in the SAHARA SGL WORKAROUND below -// -// We will likely adjust the number of pools and/or pool properties over time.. +/* + * At the moment I'm going to statically initialize 4 pools: + * 100k buffer pool: The vast majority of the expected buffers are expected to + * be less than or equal to 100k. At 30 entries per and + * 8k initial buffers amounts to ~4MB of memory + * NOTE - This used to be 64K with 20 entries, but during + * WHQL NDIS 6.0 Testing (2c_mini6stress) MS does their + * best to send absurd NBL's with ridiculous SGLs, we + * have received 400byte sends contained in SGL's that + * have 28 entries + * 1M buffer pool: Buffers between 64k and 1M. Allocate 256 initial buffers + * with 300 entries each => ~2MB of memory + * 5M buffer pool: Not expected often, if at all. 32 initial buffers + * at 1500 entries each => ~1MB of memory + * 10M buffer pool: Not expected at all, except under pathelogical conditions. + * Allocate one at initialization time. + * Note - 10M is the current limit of what we can + * realistically support due to the sahara SGL + * bug described in the SAHARA SGL WORKAROUND below + * + * We will likely adjust the number of pools and/or pool properties over time.. + */ #define SXG_NUM_SGL_POOLS 4 #define INITIALIZE_SGL_POOL_PROPERTIES \ struct sxg_sgl_pool_properties SxgSglPoolProperties[SXG_NUM_SGL_POOLS] = \ @@ -827,88 +836,97 @@ extern struct sxg_sgl_pool_properties SxgSglPoolProperties[]; #define SXG_MAX_SGL_BUFFER_SIZE \ SxgSglPoolProperties[SXG_NUM_SGL_POOLS - 1].NBSize -// SAHARA SGL WORKAROUND!! -// The current Sahara card uses a 16-bit counter when advancing -// SGL address locations. This means that if an SGL crosses -// a 64k boundary, the hardware will actually skip back to -// the start of the previous 64k boundary, with obviously -// undesirable results. -// -// We currently workaround this issue by allocating SGL buffers -// in 64k blocks and skipping over buffers that straddle the boundary. +/* + * SAHARA SGL WORKAROUND!! + * The current Sahara card uses a 16-bit counter when advancing + * SGL address locations. This means that if an SGL crosses + * a 64k boundary, the hardware will actually skip back to + * the start of the previous 64k boundary, with obviously + * undesirable results. + * + * We currently workaround this issue by allocating SGL buffers + * in 64k blocks and skipping over buffers that straddle the boundary. + */ #define SXG_INVALID_SGL(_SxgSgl) \ (((_SxgSgl)->PhysicalAddress.LowPart & 0xFFFF0000) != \ (((_SxgSgl)->PhysicalAddress.LowPart + \ SXG_SGL_SIZE((_SxgSgl)->Pool)) & 0xFFFF0000)) -// Allocate SGLs in blocks so we can skip over invalid entries. -// We allocation 64k worth of SGL buffers, including the -// struct sxg_sgl_block_hdr, plus one for padding +/* + * Allocate SGLs in blocks so we can skip over invalid entries. + * We allocation 64k worth of SGL buffers, including the + * struct sxg_sgl_block_hdr, plus one for padding + */ #define SXG_SGL_BLOCK_SIZE 65536 #define SXG_SGL_ALLOCATION_SIZE(_Pool) SXG_SGL_BLOCK_SIZE + SXG_SGL_SIZE(_Pool) struct sxg_sgl_block_hdr { - ushort Pool; // Associated SGL pool - struct list_entry List; // SXG_SCATTER_GATHER blocks - dma64_addr_t PhysicalAddress;// physical address + ushort Pool; /* Associated SGL pool */ + struct list_entry List; /* struct sxg_scatter_gather blocks */ + dma64_addr_t PhysicalAddress;/* physical address */ }; - -// The following definition denotes the maximum block of memory that the -// card can DMA to. It is specified in the call to NdisMRegisterScatterGatherDma. -// For now, use the same value as used in the Slic/Oasis driver, which -// is 128M. That should cover any expected MDL that I can think of. +/* + * The following definition denotes the maximum block of memory that the + * card can DMA to. It is specified in the call to NdisMRegisterScatterGatherDma. + * For now, use the same value as used in the Slic/Oasis driver, which + * is 128M. That should cover any expected MDL that I can think of. + */ #define SXG_MAX_PHYS_MAP (1024 * 1024 * 128) -// Self identifying structure type +/* Self identifying structure type */ enum SXG_SGL_TYPE { - SXG_SGL_DUMB, // Dumb NIC SGL - SXG_SGL_SLOW, // Slowpath protocol header - see below - SXG_SGL_CHIMNEY // Chimney offload SGL + SXG_SGL_DUMB, /* Dumb NIC SGL */ + SXG_SGL_SLOW, /* Slowpath protocol header - see below */ + SXG_SGL_CHIMNEY /* Chimney offload SGL */ }; -// The ucode expects an NDIS SGL structure that -// is formatted for an x64 system. When running -// on an x64 system, we can simply hand the NDIS SGL -// to the card directly. For x86 systems we must reconstruct -// the SGL. The following structure defines an x64 -// formatted SGL entry +/* + * The ucode expects an NDIS SGL structure that + * is formatted for an x64 system. When running + * on an x64 system, we can simply hand the NDIS SGL + * to the card directly. For x86 systems we must reconstruct + * the SGL. The following structure defines an x64 + * formatted SGL entry + */ struct sxg_x64_sge { - dma64_addr_t Address; // same as wdm.h - u32 Length; // same as wdm.h - u32 CompilerPad; // The compiler pads to 8-bytes - u64 Reserved; // u32 * in wdm.h. Force to 8 bytes + dma64_addr_t Address; /* same as wdm.h */ + u32 Length; /* same as wdm.h */ + u32 CompilerPad; /* The compiler pads to 8-bytes */ + u64 Reserved; /* u32 * in wdm.h. Force to 8 bytes */ }; -// Our SGL structure - Essentially the same as -// wdm.h:SCATTER_GATHER_LIST. Note the variable number of -// elements based on the pool specified above +/* + * Our SGL structure - Essentially the same as + * wdm.h:SCATTER_GATHER_LIST. Note the variable number of + * elements based on the pool specified above + */ struct sxg_x64_sgl { u32 NumberOfElements; u32 *Reserved; - struct sxg_x64_sge Elements[1]; // Variable + struct sxg_x64_sge Elements[1]; /* Variable */ }; struct sxg_scatter_gather { - enum SXG_SGL_TYPE Type; // FIRST! Dumb-nic or offload - ushort Pool; // Associated SGL pool - ushort Entries; // SGL total entries - void *adapter; // Back pointer to adapter - struct list_entry FreeList; // Free SXG_SCATTER_GATHER blocks - struct list_entry AllList; // All SXG_SCATTER_GATHER blocks - dma_addr_t PhysicalAddress; // physical address - unsigned char State; // See SXG_BUFFER state above - unsigned char CmdIndex; // Command ring index - struct sk_buff *DumbPacket; // Associated Packet - u32 Direction; // For asynchronous completions - u32 CurOffset; // Current SGL offset - u32 SglRef; // SGL reference count - struct vlan_hdr VlanTag; // VLAN tag to be inserted into SGL - struct sxg_x64_sgl *pSgl; // SGL Addr. Possibly &Sgl - struct sxg_x64_sgl Sgl; // SGL handed to card + enum SXG_SGL_TYPE Type; /* FIRST! Dumb-nic or offload */ + ushort Pool; /* Associated SGL pool */ + ushort Entries; /* SGL total entries */ + void * adapter; /* Back pointer to adapter */ + struct list_entry FreeList; /* Free struct sxg_scatter_gather blocks */ + struct list_entry AllList; /* All struct sxg_scatter_gather blocks */ + dma_addr_t PhysicalAddress;/* physical address */ + unsigned char State; /* See SXG_BUFFER state above */ + unsigned char CmdIndex; /* Command ring index */ + struct sk_buff *DumbPacket; /* Associated Packet */ + u32 Direction; /* For asynchronous completions */ + u32 CurOffset; /* Current SGL offset */ + u32 SglRef; /* SGL reference count */ + struct vlan_hdr VlanTag; /* VLAN tag to be inserted into SGL */ + struct sxg_x64_sgl *pSgl; /* SGL Addr. Possibly &Sgl */ + struct sxg_x64_sgl Sgl; /* SGL handed to card */ }; -// Note - the "- 1" is because SXG_SCATTER_GATHER=>struct sxg_x64_sgl includes 1 SGE.. +/* Note - the "- 1" is because struct sxg_scatter_gather=>struct sxg_x64_sgl includes 1 SGE.. */ #define SXG_SGL_SIZE(_Pool) \ (sizeof(struct sxg_scatter_gather) + \ ((SxgSglPoolProperties[_Pool].SGEntries - 1) * \ @@ -919,7 +937,7 @@ struct sxg_scatter_gather { #define SXG_SGL_BUFFER_LENGTH(_SxgSgl) ((_SxgSgl)->Entries * sizeof(struct sxg_x64_sge)) #define SXG_SGL_BUF_SIZE sizeof(struct sxg_x64_sgl) #elif defined(CONFIG_X86) -// Force NDIS to give us it's own buffer so we can reformat to our own +/* Force NDIS to give us it's own buffer so we can reformat to our own */ #define SXG_SGL_BUFFER(_SxgSgl) NULL #define SXG_SGL_BUFFER_LENGTH(_SxgSgl) 0 #define SXG_SGL_BUF_SIZE 0 @@ -927,18 +945,16 @@ struct sxg_scatter_gather { #error staging: sxg: driver is for X86 only! #endif -/*************************************************************************** - * Microcode statistics - ***************************************************************************/ +/* Microcode statistics */ struct sxg_ucode_stats { - u32 RPDQOflow; // PDQ overflow (unframed ie dq & drop 1st) - u32 XDrops; // Xmt drops due to no xmt buffer - u32 ERDrops; // Rcv drops due to ER full - u32 NBDrops; // Rcv drops due to out of host buffers - u32 PQDrops; // Rcv drops due to PDQ full - u32 BFDrops; // Rcv drops due to bad frame: no link addr match, frlen > max - u32 UPDrops; // Rcv drops due to UPFq full - u32 XNoBufs; // Xmt drop due to no DRAM Xmit buffer or PxyBuf + u32 RPDQOflow; /* PDQ overflow (unframed ie dq & drop 1st) */ + u32 XDrops; /* Xmt drops due to no xmt buffer */ + u32 ERDrops; /* Rcv drops due to ER full */ + u32 NBDrops; /* Rcv drops due to out of host buffers */ + u32 PQDrops; /* Rcv drops due to PDQ full */ + u32 BFDrops; /* Rcv drops due to bad frame: no link addr match, frlen > max */ + u32 UPDrops; /* Rcv drops due to UPFq full */ + u32 XNoBufs; /* Xmt drop due to no DRAM Xmit buffer or PxyBuf */ }; diff --git a/drivers/staging/sxg/sxghw.h b/drivers/staging/sxg/sxghw.h index bec97e81f86d..3ce1947080aa 100644 --- a/drivers/staging/sxg/sxghw.h +++ b/drivers/staging/sxg/sxghw.h @@ -1,4 +1,4 @@ -/* +/************************************************************* * Copyright © 1997-2007 Alacritech, Inc. All rights reserved * * $Id: sxghw.h,v 1.2 2008/07/24 17:24:23 chris Exp $ @@ -7,709 +7,711 @@ * * This file contains structures and definitions for the * Alacritech Sahara hardware - */ + * + **********************************************************/ -/******************************************************************************* - * PCI Configuration space - *******************************************************************************/ +/* PCI Configuration space */ /* PCI Vendor ID */ #define SXG_VENDOR_ID 0x139A /* Alacritech's Vendor ID */ -// PCI Device ID +/* PCI Device ID */ #define SXG_DEVICE_ID 0x0009 /* Sahara Device ID */ -// -// Subsystem IDs. -// -// The subsystem ID value is broken into bit fields as follows: -// Bits [15:12] - Function -// Bits [11:8] - OEM and/or operating system. -// Bits [7:0] - Base SID. -// -// SSID field (bit) masks -#define SSID_BASE_MASK 0x00FF // Base subsystem ID mask -#define SSID_OEM_MASK 0x0F00 // Subsystem OEM mask -#define SSID_FUNC_MASK 0xF000 // Subsystem function mask - -// Base SSID's -#define SSID_SAHARA_PROTO 0x0018 // 100022 Sahara prototype (XenPak) board -#define SSID_SAHARA_FIBER 0x0019 // 100023 Sahara 1-port fiber board -#define SSID_SAHARA_COPPER 0x001A // 100024 Sahara 1-port copper board - -// Useful SSID macros -#define SSID_BASE(ssid) ((ssid) & SSID_BASE_MASK) // isolate base SSID bits -#define SSID_OEM(ssid) ((ssid) & SSID_OEM_MASK) // isolate SSID OEM bits -#define SSID_FUNC(ssid) ((ssid) & SSID_FUNC_MASK) // isolate SSID function bits - -/******************************************************************************* - * HW Register Space - *******************************************************************************/ -#define SXG_HWREG_MEMSIZE 0x4000 // 16k +/* + * Subsystem IDs. + * + * The subsystem ID value is broken into bit fields as follows: + * Bits [15:12] - Function + * Bits [11:8] - OEM and/or operating system. + * Bits [7:0] - Base SID. + */ + +/* SSID field (bit) masks */ +#define SSID_BASE_MASK 0x00FF /* Base subsystem ID mask */ +#define SSID_OEM_MASK 0x0F00 /* Subsystem OEM mask */ +#define SSID_FUNC_MASK 0xF000 /* Subsystem function mask */ + +/* Base SSID's */ +#define SSID_SAHARA_PROTO 0x0018 /* 100022 Sahara prototype (XenPak) board */ +#define SSID_SAHARA_FIBER 0x0019 /* 100023 Sahara 1-port fiber board */ +#define SSID_SAHARA_COPPER 0x001A /* 100024 Sahara 1-port copper board */ + +/* Useful SSID macros */ +#define SSID_BASE(ssid) ((ssid) & SSID_BASE_MASK) /* isolate base SSID bits */ +#define SSID_OEM(ssid) ((ssid) & SSID_OEM_MASK) /* isolate SSID OEM bits */ +#define SSID_FUNC(ssid) ((ssid) & SSID_FUNC_MASK) /* isolate SSID function bits */ + + +/* HW Register Space */ +#define SXG_HWREG_MEMSIZE 0x4000 /* 16k */ #pragma pack(push, 1) struct sxg_hw_regs { - u32 Reset; // Write 0xdead to invoke soft reset - u32 Pad1; // No register defined at offset 4 - u32 InterruptMask0; // Deassert legacy interrupt on function 0 - u32 InterruptMask1; // Deassert legacy interrupt on function 1 - u32 UcodeDataLow; // Store microcode instruction bits 31-0 - u32 UcodeDataMiddle; // Store microcode instruction bits 63-32 - u32 UcodeDataHigh; // Store microcode instruction bits 95-64 - u32 UcodeAddr; // Store microcode address - See flags below - u32 PadTo0x80[24]; // Pad to Xcv configuration registers - u32 MacConfig0; // 0x80 - AXGMAC Configuration Register 0 - u32 MacConfig1; // 0x84 - AXGMAC Configuration Register 1 - u32 MacConfig2; // 0x88 - AXGMAC Configuration Register 2 - u32 MacConfig3; // 0x8C - AXGMAC Configuration Register 3 - u32 MacAddressLow; // 0x90 - AXGMAC MAC Station Address - octets 1-4 - u32 MacAddressHigh; // 0x94 - AXGMAC MAC Station Address - octets 5-6 - u32 MacReserved1[2]; // 0x98 - AXGMAC Reserved - u32 MacMaxFrameLen; // 0xA0 - AXGMAC Maximum Frame Length - u32 MacReserved2[2]; // 0xA4 - AXGMAC Reserved - u32 MacRevision; // 0xAC - AXGMAC Revision Level Register - u32 MacReserved3[4]; // 0xB0 - AXGMAC Reserved - u32 MacAmiimCmd; // 0xC0 - AXGMAC AMIIM Command Register - u32 MacAmiimField; // 0xC4 - AXGMAC AMIIM Field Register - u32 MacAmiimConfig; // 0xC8 - AXGMAC AMIIM Configuration Register - u32 MacAmiimLink; // 0xCC - AXGMAC AMIIM Link Fail Vector Register - u32 MacAmiimIndicator; // 0xD0 - AXGMAC AMIIM Indicator Registor - u32 PadTo0x100[11]; // 0xD4 - 0x100 - Pad - u32 XmtConfig; // 0x100 - Transmit Configuration Register - u32 RcvConfig; // 0x104 - Receive Configuration Register 1 - u32 LinkAddress0Low; // 0x108 - Link address 0 - u32 LinkAddress0High; // 0x10C - Link address 0 - u32 LinkAddress1Low; // 0x110 - Link address 1 - u32 LinkAddress1High; // 0x114 - Link address 1 - u32 LinkAddress2Low; // 0x118 - Link address 2 - u32 LinkAddress2High; // 0x11C - Link address 2 - u32 LinkAddress3Low; // 0x120 - Link address 3 - u32 LinkAddress3High; // 0x124 - Link address 3 - u32 ToeplitzKey[10]; // 0x128 - 0x150 - Toeplitz key - u32 SocketKey[10]; // 0x150 - 0x178 - Socket Key - u32 LinkStatus; // 0x178 - Link status - u32 ClearStats; // 0x17C - Clear Stats - u32 XmtErrorsLow; // 0x180 - Transmit stats - errors - u32 XmtErrorsHigh; // 0x184 - Transmit stats - errors - u32 XmtFramesLow; // 0x188 - Transmit stats - frame count - u32 XmtFramesHigh; // 0x18C - Transmit stats - frame count - u32 XmtBytesLow; // 0x190 - Transmit stats - byte count - u32 XmtBytesHigh; // 0x194 - Transmit stats - byte count - u32 XmtTcpSegmentsLow; // 0x198 - Transmit stats - TCP segments - u32 XmtTcpSegmentsHigh; // 0x19C - Transmit stats - TCP segments - u32 XmtTcpBytesLow; // 0x1A0 - Transmit stats - TCP bytes - u32 XmtTcpBytesHigh; // 0x1A4 - Transmit stats - TCP bytes - u32 RcvErrorsLow; // 0x1A8 - Receive stats - errors - u32 RcvErrorsHigh; // 0x1AC - Receive stats - errors - u32 RcvFramesLow; // 0x1B0 - Receive stats - frame count - u32 RcvFramesHigh; // 0x1B4 - Receive stats - frame count - u32 RcvBytesLow; // 0x1B8 - Receive stats - byte count - u32 RcvBytesHigh; // 0x1BC - Receive stats - byte count - u32 RcvTcpSegmentsLow; // 0x1C0 - Receive stats - TCP segments - u32 RcvTcpSegmentsHigh; // 0x1C4 - Receive stats - TCP segments - u32 RcvTcpBytesLow; // 0x1C8 - Receive stats - TCP bytes - u32 RcvTcpBytesHigh; // 0x1CC - Receive stats - TCP bytes - u32 PadTo0x200[12]; // 0x1D0 - 0x200 - Pad - u32 Software[1920]; // 0x200 - 0x2000 - Software defined (not used) - u32 MsixTable[1024]; // 0x2000 - 0x3000 - MSIX Table - u32 MsixBitArray[1024]; // 0x3000 - 0x4000 - MSIX Pending Bit Array + u32 Reset; /* Write 0xdead to invoke soft reset */ + u32 Pad1; /* No register defined at offset 4 */ + u32 InterruptMask0; /* Deassert legacy interrupt on function 0 */ + u32 InterruptMask1; /* Deassert legacy interrupt on function 1 */ + u32 UcodeDataLow; /* Store microcode instruction bits 31-0 */ + u32 UcodeDataMiddle; /* Store microcode instruction bits 63-32 */ + u32 UcodeDataHigh; /* Store microcode instruction bits 95-64 */ + u32 UcodeAddr; /* Store microcode address - See flags below */ + u32 PadTo0x80[24]; /* Pad to Xcv configuration registers */ + u32 MacConfig0; /* 0x80 - AXGMAC Configuration Register 0 */ + u32 MacConfig1; /* 0x84 - AXGMAC Configuration Register 1 */ + u32 MacConfig2; /* 0x88 - AXGMAC Configuration Register 2 */ + u32 MacConfig3; /* 0x8C - AXGMAC Configuration Register 3 */ + u32 MacAddressLow; /* 0x90 - AXGMAC MAC Station Address - octets 1-4 */ + u32 MacAddressHigh; /* 0x94 - AXGMAC MAC Station Address - octets 5-6 */ + u32 MacReserved1[2]; /* 0x98 - AXGMAC Reserved */ + u32 MacMaxFrameLen; /* 0xA0 - AXGMAC Maximum Frame Length */ + u32 MacReserved2[2]; /* 0xA4 - AXGMAC Reserved */ + u32 MacRevision; /* 0xAC - AXGMAC Revision Level Register */ + u32 MacReserved3[4]; /* 0xB0 - AXGMAC Reserved */ + u32 MacAmiimCmd; /* 0xC0 - AXGMAC AMIIM Command Register */ + u32 MacAmiimField; /* 0xC4 - AXGMAC AMIIM Field Register */ + u32 MacAmiimConfig; /* 0xC8 - AXGMAC AMIIM Configuration Register */ + u32 MacAmiimLink; /* 0xCC - AXGMAC AMIIM Link Fail Vector Register */ + u32 MacAmiimIndicator; /* 0xD0 - AXGMAC AMIIM Indicator Registor */ + u32 PadTo0x100[11]; /* 0xD4 - 0x100 - Pad */ + u32 XmtConfig; /* 0x100 - Transmit Configuration Register */ + u32 RcvConfig; /* 0x104 - Receive Configuration Register 1 */ + u32 LinkAddress0Low; /* 0x108 - Link address 0 */ + u32 LinkAddress0High; /* 0x10C - Link address 0 */ + u32 LinkAddress1Low; /* 0x110 - Link address 1 */ + u32 LinkAddress1High; /* 0x114 - Link address 1 */ + u32 LinkAddress2Low; /* 0x118 - Link address 2 */ + u32 LinkAddress2High; /* 0x11C - Link address 2 */ + u32 LinkAddress3Low; /* 0x120 - Link address 3 */ + u32 LinkAddress3High; /* 0x124 - Link address 3 */ + u32 ToeplitzKey[10]; /* 0x128 - 0x150 - Toeplitz key */ + u32 SocketKey[10]; /* 0x150 - 0x178 - Socket Key */ + u32 LinkStatus; /* 0x178 - Link status */ + u32 ClearStats; /* 0x17C - Clear Stats */ + u32 XmtErrorsLow; /* 0x180 - Transmit stats - errors */ + u32 XmtErrorsHigh; /* 0x184 - Transmit stats - errors */ + u32 XmtFramesLow; /* 0x188 - Transmit stats - frame count */ + u32 XmtFramesHigh; /* 0x18C - Transmit stats - frame count */ + u32 XmtBytesLow; /* 0x190 - Transmit stats - byte count */ + u32 XmtBytesHigh; /* 0x194 - Transmit stats - byte count */ + u32 XmtTcpSegmentsLow; /* 0x198 - Transmit stats - TCP segments */ + u32 XmtTcpSegmentsHigh; /* 0x19C - Transmit stats - TCP segments */ + u32 XmtTcpBytesLow; /* 0x1A0 - Transmit stats - TCP bytes */ + u32 XmtTcpBytesHigh; /* 0x1A4 - Transmit stats - TCP bytes */ + u32 RcvErrorsLow; /* 0x1A8 - Receive stats - errors */ + u32 RcvErrorsHigh; /* 0x1AC - Receive stats - errors */ + u32 RcvFramesLow; /* 0x1B0 - Receive stats - frame count */ + u32 RcvFramesHigh; /* 0x1B4 - Receive stats - frame count */ + u32 RcvBytesLow; /* 0x1B8 - Receive stats - byte count */ + u32 RcvBytesHigh; /* 0x1BC - Receive stats - byte count */ + u32 RcvTcpSegmentsLow; /* 0x1C0 - Receive stats - TCP segments */ + u32 RcvTcpSegmentsHigh; /* 0x1C4 - Receive stats - TCP segments */ + u32 RcvTcpBytesLow; /* 0x1C8 - Receive stats - TCP bytes */ + u32 RcvTcpBytesHigh; /* 0x1CC - Receive stats - TCP bytes */ + u32 PadTo0x200[12]; /* 0x1D0 - 0x200 - Pad */ + u32 Software[1920]; /* 0x200 - 0x2000 - Software defined (not used) */ + u32 MsixTable[1024]; /* 0x2000 - 0x3000 - MSIX Table */ + u32 MsixBitArray[1024]; /* 0x3000 - 0x4000 - MSIX Pending Bit Array */ }; #pragma pack(pop) -// Microcode Address Flags -#define MICROCODE_ADDRESS_GO 0x80000000 // Start microcode -#define MICROCODE_ADDRESS_WRITE 0x40000000 // Store microcode -#define MICROCODE_ADDRESS_READ 0x20000000 // Read microcode -#define MICROCODE_ADDRESS_PARITY 0x10000000 // Parity error detected -#define MICROCODE_ADDRESS_MASK 0x00001FFF // Address bits +/* Microcode Address Flags */ +#define MICROCODE_ADDRESS_GO 0x80000000 /* Start microcode */ +#define MICROCODE_ADDRESS_WRITE 0x40000000 /* Store microcode */ +#define MICROCODE_ADDRESS_READ 0x20000000 /* Read microcode */ +#define MICROCODE_ADDRESS_PARITY 0x10000000 /* Parity error detected */ +#define MICROCODE_ADDRESS_MASK 0x00001FFF /* Address bits */ -// Link Address Registers -#define LINK_ADDRESS_ENABLE 0x80000000 // Applied to link address high +/* Link Address Registers */ +#define LINK_ADDRESS_ENABLE 0x80000000 /* Applied to link address high */ -// Microsoft register space size -#define SXG_UCODEREG_MEMSIZE 0x40000 // 256k +/* Microsoft register space size */ +#define SXG_UCODEREG_MEMSIZE 0x40000 /* 256k */ -// Sahara microcode register address format. The command code, -// extended command code, and associated processor are encoded in -// the address bits as follows -#define SXG_ADDRESS_CODE_SHIFT 2 // Base command code +/* + * Sahara microcode register address format. The command code, + * extended command code, and associated processor are encoded in + * the address bits as follows + */ +#define SXG_ADDRESS_CODE_SHIFT 2 /* Base command code */ #define SXG_ADDRESS_CODE_MASK 0x0000003C -#define SXG_ADDRESS_EXCODE_SHIFT 6 // Extended (or sub) command code +#define SXG_ADDRESS_EXCODE_SHIFT 6 /* Extended (or sub) command code */ #define SXG_ADDRESS_EXCODE_MASK 0x00001FC0 -#define SXG_ADDRESS_CPUID_SHIFT 13 // CPU +#define SXG_ADDRESS_CPUID_SHIFT 13 /* CPU */ #define SXG_ADDRESS_CPUID_MASK 0x0003E000 -#define SXG_REGISTER_SIZE_PER_CPU 0x00002000 // Used to sanity check UCODE_REGS structure - -// Sahara receive sequencer status values -#define SXG_RCV_STATUS_ATTN 0x80000000 // Attention -#define SXG_RCV_STATUS_TRANSPORT_MASK 0x3F000000 // Transport mask -#define SXG_RCV_STATUS_TRANSPORT_ERROR 0x20000000 // Transport error -#define SXG_RCV_STATUS_TRANSPORT_CSUM 0x23000000 // Transport cksum error -#define SXG_RCV_STATUS_TRANSPORT_UFLOW 0x22000000 // Transport underflow -#define SXG_RCV_STATUS_TRANSPORT_HDRLEN 0x20000000 // Transport header length -#define SXG_RCV_STATUS_TRANSPORT_FLAGS 0x10000000 // Transport flags detected -#define SXG_RCV_STATUS_TRANSPORT_OPTS 0x08000000 // Transport options detected -#define SXG_RCV_STATUS_TRANSPORT_SESS_MASK 0x07000000 // Transport DDP -#define SXG_RCV_STATUS_TRANSPORT_DDP 0x06000000 // Transport DDP -#define SXG_RCV_STATUS_TRANSPORT_iSCSI 0x05000000 // Transport iSCSI -#define SXG_RCV_STATUS_TRANSPORT_NFS 0x04000000 // Transport NFS -#define SXG_RCV_STATUS_TRANSPORT_FTP 0x03000000 // Transport FTP -#define SXG_RCV_STATUS_TRANSPORT_HTTP 0x02000000 // Transport HTTP -#define SXG_RCV_STATUS_TRANSPORT_SMB 0x01000000 // Transport SMB -#define SXG_RCV_STATUS_NETWORK_MASK 0x00FF0000 // Network mask -#define SXG_RCV_STATUS_NETWORK_ERROR 0x00800000 // Network error -#define SXG_RCV_STATUS_NETWORK_CSUM 0x00830000 // Network cksum error -#define SXG_RCV_STATUS_NETWORK_UFLOW 0x00820000 // Network underflow error -#define SXG_RCV_STATUS_NETWORK_HDRLEN 0x00800000 // Network header length -#define SXG_RCV_STATUS_NETWORK_OFLOW 0x00400000 // Network overflow detected -#define SXG_RCV_STATUS_NETWORK_MCAST 0x00200000 // Network multicast detected -#define SXG_RCV_STATUS_NETWORK_OPTIONS 0x00100000 // Network options detected -#define SXG_RCV_STATUS_NETWORK_OFFSET 0x00080000 // Network offset detected -#define SXG_RCV_STATUS_NETWORK_FRAGMENT 0x00040000 // Network fragment detected -#define SXG_RCV_STATUS_NETWORK_TRANS_MASK 0x00030000 // Network transport type mask -#define SXG_RCV_STATUS_NETWORK_UDP 0x00020000 // UDP -#define SXG_RCV_STATUS_NETWORK_TCP 0x00010000 // TCP -#define SXG_RCV_STATUS_IPONLY 0x00008000 // IP-only not TCP -#define SXG_RCV_STATUS_PKT_PRI 0x00006000 // Receive priority -#define SXG_RCV_STATUS_PKT_PRI_SHFT 13 // Receive priority shift -#define SXG_RCV_STATUS_PARITY 0x00001000 // MAC Receive RAM parity error -#define SXG_RCV_STATUS_ADDRESS_MASK 0x00000F00 // Link address detection mask -#define SXG_RCV_STATUS_ADDRESS_D 0x00000B00 // Link address D -#define SXG_RCV_STATUS_ADDRESS_C 0x00000A00 // Link address C -#define SXG_RCV_STATUS_ADDRESS_B 0x00000900 // Link address B -#define SXG_RCV_STATUS_ADDRESS_A 0x00000800 // Link address A -#define SXG_RCV_STATUS_ADDRESS_BCAST 0x00000300 // Link address broadcast -#define SXG_RCV_STATUS_ADDRESS_MCAST 0x00000200 // Link address multicast -#define SXG_RCV_STATUS_ADDRESS_CMCAST 0x00000100 // Link control multicast -#define SXG_RCV_STATUS_LINK_MASK 0x000000FF // Link status mask -#define SXG_RCV_STATUS_LINK_ERROR 0x00000080 // Link error -#define SXG_RCV_STATUS_LINK_MASK 0x000000FF // Link status mask -#define SXG_RCV_STATUS_LINK_PARITY 0x00000087 // RcvMacQ parity error -#define SXG_RCV_STATUS_LINK_EARLY 0x00000086 // Data early -#define SXG_RCV_STATUS_LINK_BUFOFLOW 0x00000085 // Buffer overflow -#define SXG_RCV_STATUS_LINK_CODE 0x00000084 // Link code error -#define SXG_RCV_STATUS_LINK_DRIBBLE 0x00000083 // Dribble nibble -#define SXG_RCV_STATUS_LINK_CRC 0x00000082 // CRC error -#define SXG_RCV_STATUS_LINK_OFLOW 0x00000081 // Link overflow -#define SXG_RCV_STATUS_LINK_UFLOW 0x00000080 // Link underflow -#define SXG_RCV_STATUS_LINK_8023 0x00000020 // 802.3 -#define SXG_RCV_STATUS_LINK_SNAP 0x00000010 // Snap -#define SXG_RCV_STATUS_LINK_VLAN 0x00000008 // VLAN -#define SXG_RCV_STATUS_LINK_TYPE_MASK 0x00000007 // Network type mask -#define SXG_RCV_STATUS_LINK_CONTROL 0x00000003 // Control packet -#define SXG_RCV_STATUS_LINK_IPV6 0x00000002 // IPv6 packet -#define SXG_RCV_STATUS_LINK_IPV4 0x00000001 // IPv4 packet - -/*************************************************************************** - * Sahara receive and transmit configuration registers - ***************************************************************************/ -#define RCV_CONFIG_RESET 0x80000000 // RcvConfig register reset -#define RCV_CONFIG_ENABLE 0x40000000 // Enable the receive logic -#define RCV_CONFIG_ENPARSE 0x20000000 // Enable the receive parser -#define RCV_CONFIG_SOCKET 0x10000000 // Enable the socket detector -#define RCV_CONFIG_RCVBAD 0x08000000 // Receive all bad frames -#define RCV_CONFIG_CONTROL 0x04000000 // Receive all control frames -#define RCV_CONFIG_RCVPAUSE 0x02000000 // Enable pause transmit when attn -#define RCV_CONFIG_TZIPV6 0x01000000 // Include TCP port w/ IPv6 toeplitz -#define RCV_CONFIG_TZIPV4 0x00800000 // Include TCP port w/ IPv4 toeplitz -#define RCV_CONFIG_FLUSH 0x00400000 // Flush buffers -#define RCV_CONFIG_PRIORITY_MASK 0x00300000 // Priority level -#define RCV_CONFIG_CONN_MASK 0x000C0000 // Number of connections -#define RCV_CONFIG_CONN_4K 0x00000000 // 4k connections -#define RCV_CONFIG_CONN_2K 0x00040000 // 2k connections -#define RCV_CONFIG_CONN_1K 0x00080000 // 1k connections -#define RCV_CONFIG_CONN_512 0x000C0000 // 512 connections -#define RCV_CONFIG_HASH_MASK 0x00030000 // Hash depth -#define RCV_CONFIG_HASH_8 0x00000000 // Hash depth 8 -#define RCV_CONFIG_HASH_16 0x00010000 // Hash depth 16 -#define RCV_CONFIG_HASH_4 0x00020000 // Hash depth 4 -#define RCV_CONFIG_HASH_2 0x00030000 // Hash depth 2 -#define RCV_CONFIG_BUFLEN_MASK 0x0000FFF0 // Buffer length bits 15:4. ie multiple of 16. -#define RCV_CONFIG_SKT_DIS 0x00000008 // Disable socket detection on attn -// Macro to determine RCV_CONFIG_BUFLEN based on maximum frame size. -// We add 18 bytes for Sahara receive status and padding, plus 4 bytes for CRC, -// and round up to nearest 16 byte boundary +#define SXG_REGISTER_SIZE_PER_CPU 0x00002000 /* Used to sanity check UCODE_REGS structure */ + +/* Sahara receive sequencer status values */ +#define SXG_RCV_STATUS_ATTN 0x80000000 /* Attention */ +#define SXG_RCV_STATUS_TRANSPORT_MASK 0x3F000000 /* Transport mask */ +#define SXG_RCV_STATUS_TRANSPORT_ERROR 0x20000000 /* Transport error */ +#define SXG_RCV_STATUS_TRANSPORT_CSUM 0x23000000 /* Transport cksum error */ +#define SXG_RCV_STATUS_TRANSPORT_UFLOW 0x22000000 /* Transport underflow */ +#define SXG_RCV_STATUS_TRANSPORT_HDRLEN 0x20000000 /* Transport header length */ +#define SXG_RCV_STATUS_TRANSPORT_FLAGS 0x10000000 /* Transport flags detected */ +#define SXG_RCV_STATUS_TRANSPORT_OPTS 0x08000000 /* Transport options detected */ +#define SXG_RCV_STATUS_TRANSPORT_SESS_MASK 0x07000000 /* Transport DDP */ +#define SXG_RCV_STATUS_TRANSPORT_DDP 0x06000000 /* Transport DDP */ +#define SXG_RCV_STATUS_TRANSPORT_iSCSI 0x05000000 /* Transport iSCSI */ +#define SXG_RCV_STATUS_TRANSPORT_NFS 0x04000000 /* Transport NFS */ +#define SXG_RCV_STATUS_TRANSPORT_FTP 0x03000000 /* Transport FTP */ +#define SXG_RCV_STATUS_TRANSPORT_HTTP 0x02000000 /* Transport HTTP */ +#define SXG_RCV_STATUS_TRANSPORT_SMB 0x01000000 /* Transport SMB */ +#define SXG_RCV_STATUS_NETWORK_MASK 0x00FF0000 /* Network mask */ +#define SXG_RCV_STATUS_NETWORK_ERROR 0x00800000 /* Network error */ +#define SXG_RCV_STATUS_NETWORK_CSUM 0x00830000 /* Network cksum error */ +#define SXG_RCV_STATUS_NETWORK_UFLOW 0x00820000 /* Network underflow error */ +#define SXG_RCV_STATUS_NETWORK_HDRLEN 0x00800000 /* Network header length */ +#define SXG_RCV_STATUS_NETWORK_OFLOW 0x00400000 /* Network overflow detected */ +#define SXG_RCV_STATUS_NETWORK_MCAST 0x00200000 /* Network multicast detected */ +#define SXG_RCV_STATUS_NETWORK_OPTIONS 0x00100000 /* Network options detected */ +#define SXG_RCV_STATUS_NETWORK_OFFSET 0x00080000 /* Network offset detected */ +#define SXG_RCV_STATUS_NETWORK_FRAGMENT 0x00040000 /* Network fragment detected */ +#define SXG_RCV_STATUS_NETWORK_TRANS_MASK 0x00030000 /* Network transport type mask */ +#define SXG_RCV_STATUS_NETWORK_UDP 0x00020000 /* UDP */ +#define SXG_RCV_STATUS_NETWORK_TCP 0x00010000 /* TCP */ +#define SXG_RCV_STATUS_IPONLY 0x00008000 /* IP-only not TCP */ +#define SXG_RCV_STATUS_PKT_PRI 0x00006000 /* Receive priority */ +#define SXG_RCV_STATUS_PKT_PRI_SHFT 13 /* Receive priority shift */ +#define SXG_RCV_STATUS_PARITY 0x00001000 /* MAC Receive RAM parity error */ +#define SXG_RCV_STATUS_ADDRESS_MASK 0x00000F00 /* Link address detection mask */ +#define SXG_RCV_STATUS_ADDRESS_D 0x00000B00 /* Link address D */ +#define SXG_RCV_STATUS_ADDRESS_C 0x00000A00 /* Link address C */ +#define SXG_RCV_STATUS_ADDRESS_B 0x00000900 /* Link address B */ +#define SXG_RCV_STATUS_ADDRESS_A 0x00000800 /* Link address A */ +#define SXG_RCV_STATUS_ADDRESS_BCAST 0x00000300 /* Link address broadcast */ +#define SXG_RCV_STATUS_ADDRESS_MCAST 0x00000200 /* Link address multicast */ +#define SXG_RCV_STATUS_ADDRESS_CMCAST 0x00000100 /* Link control multicast */ +#define SXG_RCV_STATUS_LINK_MASK 0x000000FF /* Link status mask */ +#define SXG_RCV_STATUS_LINK_ERROR 0x00000080 /* Link error */ +#define SXG_RCV_STATUS_LINK_MASK 0x000000FF /* Link status mask */ +#define SXG_RCV_STATUS_LINK_PARITY 0x00000087 /* RcvMacQ parity error */ +#define SXG_RCV_STATUS_LINK_EARLY 0x00000086 /* Data early */ +#define SXG_RCV_STATUS_LINK_BUFOFLOW 0x00000085 /* Buffer overflow */ +#define SXG_RCV_STATUS_LINK_CODE 0x00000084 /* Link code error */ +#define SXG_RCV_STATUS_LINK_DRIBBLE 0x00000083 /* Dribble nibble */ +#define SXG_RCV_STATUS_LINK_CRC 0x00000082 /* CRC error */ +#define SXG_RCV_STATUS_LINK_OFLOW 0x00000081 /* Link overflow */ +#define SXG_RCV_STATUS_LINK_UFLOW 0x00000080 /* Link underflow */ +#define SXG_RCV_STATUS_LINK_8023 0x00000020 /* 802.3 */ +#define SXG_RCV_STATUS_LINK_SNAP 0x00000010 /* Snap */ +#define SXG_RCV_STATUS_LINK_VLAN 0x00000008 /* VLAN */ +#define SXG_RCV_STATUS_LINK_TYPE_MASK 0x00000007 /* Network type mask */ +#define SXG_RCV_STATUS_LINK_CONTROL 0x00000003 /* Control packet */ +#define SXG_RCV_STATUS_LINK_IPV6 0x00000002 /* IPv6 packet */ +#define SXG_RCV_STATUS_LINK_IPV4 0x00000001 /* IPv4 packet */ + +/* Sahara receive and transmit configuration registers */ +#define RCV_CONFIG_RESET 0x80000000 /* RcvConfig register reset */ +#define RCV_CONFIG_ENABLE 0x40000000 /* Enable the receive logic */ +#define RCV_CONFIG_ENPARSE 0x20000000 /* Enable the receive parser */ +#define RCV_CONFIG_SOCKET 0x10000000 /* Enable the socket detector */ +#define RCV_CONFIG_RCVBAD 0x08000000 /* Receive all bad frames */ +#define RCV_CONFIG_CONTROL 0x04000000 /* Receive all control frames */ +#define RCV_CONFIG_RCVPAUSE 0x02000000 /* Enable pause transmit when attn */ +#define RCV_CONFIG_TZIPV6 0x01000000 /* Include TCP port w/ IPv6 toeplitz */ +#define RCV_CONFIG_TZIPV4 0x00800000 /* Include TCP port w/ IPv4 toeplitz */ +#define RCV_CONFIG_FLUSH 0x00400000 /* Flush buffers */ +#define RCV_CONFIG_PRIORITY_MASK 0x00300000 /* Priority level */ +#define RCV_CONFIG_CONN_MASK 0x000C0000 /* Number of connections */ +#define RCV_CONFIG_CONN_4K 0x00000000 /* 4k connections */ +#define RCV_CONFIG_CONN_2K 0x00040000 /* 2k connections */ +#define RCV_CONFIG_CONN_1K 0x00080000 /* 1k connections */ +#define RCV_CONFIG_CONN_512 0x000C0000 /* 512 connections */ +#define RCV_CONFIG_HASH_MASK 0x00030000 /* Hash depth */ +#define RCV_CONFIG_HASH_8 0x00000000 /* Hash depth 8 */ +#define RCV_CONFIG_HASH_16 0x00010000 /* Hash depth 16 */ +#define RCV_CONFIG_HASH_4 0x00020000 /* Hash depth 4 */ +#define RCV_CONFIG_HASH_2 0x00030000 /* Hash depth 2 */ +#define RCV_CONFIG_BUFLEN_MASK 0x0000FFF0 /* Buffer length bits 15:4. ie multiple of 16. */ +#define RCV_CONFIG_SKT_DIS 0x00000008 /* Disable socket detection on attn */ +/* + * Macro to determine RCV_CONFIG_BUFLEN based on maximum frame size. + * We add 18 bytes for Sahara receive status and padding, plus 4 bytes for CRC, + * and round up to nearest 16 byte boundary + */ #define RCV_CONFIG_BUFSIZE(_MaxFrame) ((((_MaxFrame) + 22) + 15) & RCV_CONFIG_BUFLEN_MASK) -#define XMT_CONFIG_RESET 0x80000000 // XmtConfig register reset -#define XMT_CONFIG_ENABLE 0x40000000 // Enable transmit logic -#define XMT_CONFIG_MAC_PARITY 0x20000000 // Inhibit MAC RAM parity error -#define XMT_CONFIG_BUF_PARITY 0x10000000 // Inhibit D2F buffer parity error -#define XMT_CONFIG_MEM_PARITY 0x08000000 // Inhibit 1T SRAM parity error -#define XMT_CONFIG_INVERT_PARITY 0x04000000 // Invert MAC RAM parity -#define XMT_CONFIG_INITIAL_IPID 0x0000FFFF // Initial IPID +#define XMT_CONFIG_RESET 0x80000000 /* XmtConfig register reset */ +#define XMT_CONFIG_ENABLE 0x40000000 /* Enable transmit logic */ +#define XMT_CONFIG_MAC_PARITY 0x20000000 /* Inhibit MAC RAM parity error */ +#define XMT_CONFIG_BUF_PARITY 0x10000000 /* Inhibit D2F buffer parity error */ +#define XMT_CONFIG_MEM_PARITY 0x08000000 /* Inhibit 1T SRAM parity error */ +#define XMT_CONFIG_INVERT_PARITY 0x04000000 /* Invert MAC RAM parity */ +#define XMT_CONFIG_INITIAL_IPID 0x0000FFFF /* Initial IPID */ -/*************************************************************************** +/* * A-XGMAC Registers - Occupy 0x80 - 0xD4 of the struct sxg_hw_regs * * Full register descriptions can be found in axgmac.pdf - ***************************************************************************/ -// A-XGMAC Configuration Register 0 -#define AXGMAC_CFG0_SUB_RESET 0x80000000 // Sub module reset -#define AXGMAC_CFG0_RCNTRL_RESET 0x00400000 // Receive control reset -#define AXGMAC_CFG0_RFUNC_RESET 0x00200000 // Receive function reset -#define AXGMAC_CFG0_TCNTRL_RESET 0x00040000 // Transmit control reset -#define AXGMAC_CFG0_TFUNC_RESET 0x00020000 // Transmit function reset -#define AXGMAC_CFG0_MII_RESET 0x00010000 // MII Management reset - -// A-XGMAC Configuration Register 1 -#define AXGMAC_CFG1_XMT_PAUSE 0x80000000 // Allow the sending of Pause frames -#define AXGMAC_CFG1_XMT_EN 0x40000000 // Enable transmit -#define AXGMAC_CFG1_RCV_PAUSE 0x20000000 // Allow the detection of Pause frames -#define AXGMAC_CFG1_RCV_EN 0x10000000 // Enable receive -#define AXGMAC_CFG1_XMT_STATE 0x04000000 // Current transmit state - READ ONLY -#define AXGMAC_CFG1_RCV_STATE 0x01000000 // Current receive state - READ ONLY -#define AXGMAC_CFG1_XOFF_SHORT 0x00001000 // Only pause for 64 slot on XOFF -#define AXGMAC_CFG1_XMG_FCS1 0x00000400 // Delay transmit FCS 1 4-byte word -#define AXGMAC_CFG1_XMG_FCS2 0x00000800 // Delay transmit FCS 2 4-byte words -#define AXGMAC_CFG1_XMG_FCS3 0x00000C00 // Delay transmit FCS 3 4-byte words -#define AXGMAC_CFG1_RCV_FCS1 0x00000100 // Delay receive FCS 1 4-byte word -#define AXGMAC_CFG1_RCV_FCS2 0x00000200 // Delay receive FCS 2 4-byte words -#define AXGMAC_CFG1_RCV_FCS3 0x00000300 // Delay receive FCS 3 4-byte words -#define AXGMAC_CFG1_PKT_OVERRIDE 0x00000080 // Per-packet override enable -#define AXGMAC_CFG1_SWAP 0x00000040 // Byte swap enable -#define AXGMAC_CFG1_SHORT_ASSERT 0x00000020 // ASSERT srdrpfrm on short frame (<64) -#define AXGMAC_CFG1_RCV_STRICT 0x00000010 // RCV only 802.3AE when CLEAR -#define AXGMAC_CFG1_CHECK_LEN 0x00000008 // Verify frame length -#define AXGMAC_CFG1_GEN_FCS 0x00000004 // Generate FCS -#define AXGMAC_CFG1_PAD_MASK 0x00000003 // Mask for pad bits -#define AXGMAC_CFG1_PAD_64 0x00000001 // Pad frames to 64 bytes -#define AXGMAC_CFG1_PAD_VLAN 0x00000002 // Detect VLAN and pad to 68 bytes -#define AXGMAC_CFG1_PAD_68 0x00000003 // Pad to 68 bytes - -// A-XGMAC Configuration Register 2 -#define AXGMAC_CFG2_GEN_PAUSE 0x80000000 // Generate single pause frame (test) -#define AXGMAC_CFG2_LF_MANUAL 0x08000000 // Manual link fault sequence -#define AXGMAC_CFG2_LF_AUTO 0x04000000 // Auto link fault sequence -#define AXGMAC_CFG2_LF_REMOTE 0x02000000 // Remote link fault (READ ONLY) -#define AXGMAC_CFG2_LF_LOCAL 0x01000000 // Local link fault (READ ONLY) -#define AXGMAC_CFG2_IPG_MASK 0x001F0000 // Inter packet gap + */ +/* A-XGMAC Configuration Register 0 */ +#define AXGMAC_CFG0_SUB_RESET 0x80000000 /* Sub module reset */ +#define AXGMAC_CFG0_RCNTRL_RESET 0x00400000 /* Receive control reset */ +#define AXGMAC_CFG0_RFUNC_RESET 0x00200000 /* Receive function reset */ +#define AXGMAC_CFG0_TCNTRL_RESET 0x00040000 /* Transmit control reset */ +#define AXGMAC_CFG0_TFUNC_RESET 0x00020000 /* Transmit function reset */ +#define AXGMAC_CFG0_MII_RESET 0x00010000 /* MII Management reset */ + +/* A-XGMAC Configuration Register 1 */ +#define AXGMAC_CFG1_XMT_PAUSE 0x80000000 /* Allow the sending of Pause frames */ +#define AXGMAC_CFG1_XMT_EN 0x40000000 /* Enable transmit */ +#define AXGMAC_CFG1_RCV_PAUSE 0x20000000 /* Allow the detection of Pause frames */ +#define AXGMAC_CFG1_RCV_EN 0x10000000 /* Enable receive */ +#define AXGMAC_CFG1_XMT_STATE 0x04000000 /* Current transmit state - READ ONLY */ +#define AXGMAC_CFG1_RCV_STATE 0x01000000 /* Current receive state - READ ONLY */ +#define AXGMAC_CFG1_XOFF_SHORT 0x00001000 /* Only pause for 64 slot on XOFF */ +#define AXGMAC_CFG1_XMG_FCS1 0x00000400 /* Delay transmit FCS 1 4-byte word */ +#define AXGMAC_CFG1_XMG_FCS2 0x00000800 /* Delay transmit FCS 2 4-byte words */ +#define AXGMAC_CFG1_XMG_FCS3 0x00000C00 /* Delay transmit FCS 3 4-byte words */ +#define AXGMAC_CFG1_RCV_FCS1 0x00000100 /* Delay receive FCS 1 4-byte word */ +#define AXGMAC_CFG1_RCV_FCS2 0x00000200 /* Delay receive FCS 2 4-byte words */ +#define AXGMAC_CFG1_RCV_FCS3 0x00000300 /* Delay receive FCS 3 4-byte words */ +#define AXGMAC_CFG1_PKT_OVERRIDE 0x00000080 /* Per-packet override enable */ +#define AXGMAC_CFG1_SWAP 0x00000040 /* Byte swap enable */ +#define AXGMAC_CFG1_SHORT_ASSERT 0x00000020 /* ASSERT srdrpfrm on short frame (<64) */ +#define AXGMAC_CFG1_RCV_STRICT 0x00000010 /* RCV only 802.3AE when CLEAR */ +#define AXGMAC_CFG1_CHECK_LEN 0x00000008 /* Verify frame length */ +#define AXGMAC_CFG1_GEN_FCS 0x00000004 /* Generate FCS */ +#define AXGMAC_CFG1_PAD_MASK 0x00000003 /* Mask for pad bits */ +#define AXGMAC_CFG1_PAD_64 0x00000001 /* Pad frames to 64 bytes */ +#define AXGMAC_CFG1_PAD_VLAN 0x00000002 /* Detect VLAN and pad to 68 bytes */ +#define AXGMAC_CFG1_PAD_68 0x00000003 /* Pad to 68 bytes */ + +/* A-XGMAC Configuration Register 2 */ +#define AXGMAC_CFG2_GEN_PAUSE 0x80000000 /* Generate single pause frame (test) */ +#define AXGMAC_CFG2_LF_MANUAL 0x08000000 /* Manual link fault sequence */ +#define AXGMAC_CFG2_LF_AUTO 0x04000000 /* Auto link fault sequence */ +#define AXGMAC_CFG2_LF_REMOTE 0x02000000 /* Remote link fault (READ ONLY) */ +#define AXGMAC_CFG2_LF_LOCAL 0x01000000 /* Local link fault (READ ONLY) */ +#define AXGMAC_CFG2_IPG_MASK 0x001F0000 /* Inter packet gap */ #define AXGMAC_CFG2_IPG_SHIFT 16 -#define AXGMAC_CFG2_PAUSE_XMT 0x00008000 // Pause transmit module -#define AXGMAC_CFG2_IPG_EXTEN 0x00000020 // Enable IPG extension algorithm -#define AXGMAC_CFG2_IPGEX_MASK 0x0000001F // IPG extension - -// A-XGMAC Configuration Register 3 -#define AXGMAC_CFG3_RCV_DROP 0xFFFF0000 // Receive frame drop filter -#define AXGMAC_CFG3_RCV_DONT_CARE 0x0000FFFF // Receive frame don't care filter - -// A-XGMAC Station Address Register - Octets 1-4 -#define AXGMAC_SARLOW_OCTET_ONE 0xFF000000 // First octet -#define AXGMAC_SARLOW_OCTET_TWO 0x00FF0000 // Second octet -#define AXGMAC_SARLOW_OCTET_THREE 0x0000FF00 // Third octet -#define AXGMAC_SARLOW_OCTET_FOUR 0x000000FF // Fourth octet - -// A-XGMAC Station Address Register - Octets 5-6 -#define AXGMAC_SARHIGH_OCTET_FIVE 0xFF000000 // Fifth octet -#define AXGMAC_SARHIGH_OCTET_SIX 0x00FF0000 // Sixth octet - -// A-XGMAC Maximum frame length register -#define AXGMAC_MAXFRAME_XMT 0x3FFF0000 // Maximum transmit frame length +#define AXGMAC_CFG2_PAUSE_XMT 0x00008000 /* Pause transmit module */ +#define AXGMAC_CFG2_IPG_EXTEN 0x00000020 /* Enable IPG extension algorithm */ +#define AXGMAC_CFG2_IPGEX_MASK 0x0000001F /* IPG extension */ + +/* A-XGMAC Configuration Register 3 */ +#define AXGMAC_CFG3_RCV_DROP 0xFFFF0000 /* Receive frame drop filter */ +#define AXGMAC_CFG3_RCV_DONT_CARE 0x0000FFFF /* Receive frame don't care filter */ + +/* A-XGMAC Station Address Register - Octets 1-4 */ +#define AXGMAC_SARLOW_OCTET_ONE 0xFF000000 /* First octet */ +#define AXGMAC_SARLOW_OCTET_TWO 0x00FF0000 /* Second octet */ +#define AXGMAC_SARLOW_OCTET_THREE 0x0000FF00 /* Third octet */ +#define AXGMAC_SARLOW_OCTET_FOUR 0x000000FF /* Fourth octet */ + +/* A-XGMAC Station Address Register - Octets 5-6 */ +#define AXGMAC_SARHIGH_OCTET_FIVE 0xFF000000 /* Fifth octet */ +#define AXGMAC_SARHIGH_OCTET_SIX 0x00FF0000 /* Sixth octet */ + +/* A-XGMAC Maximum frame length register */ +#define AXGMAC_MAXFRAME_XMT 0x3FFF0000 /* Maximum transmit frame length */ #define AXGMAC_MAXFRAME_XMT_SHIFT 16 -#define AXGMAC_MAXFRAME_RCV 0x0000FFFF // Maximum receive frame length -// This register doesn't need to be written for standard MTU. -// For jumbo, I'll just statically define the value here. This -// value sets the receive byte count to 9036 (0x234C) and the -// transmit WORD count to 2259 (0x8D3). These values include 22 -// bytes of padding beyond the jumbo MTU of 9014 +#define AXGMAC_MAXFRAME_RCV 0x0000FFFF /* Maximum receive frame length */ +/* + * This register doesn't need to be written for standard MTU. + * For jumbo, I'll just statically define the value here. This + * value sets the receive byte count to 9036 (0x234C) and the + * transmit WORD count to 2259 (0x8D3). These values include 22 + * bytes of padding beyond the jumbo MTU of 9014 + */ #define AXGMAC_MAXFRAME_JUMBO 0x08D3234C -// A-XGMAC Revision level -#define AXGMAC_REVISION_MASK 0x0000FFFF // Revision level - -// A-XGMAC AMIIM Command Register -#define AXGMAC_AMIIM_CMD_START 0x00000008 // Command start -#define AXGMAC_AMIIM_CMD_MASK 0x00000007 // Command -#define AXGMAC_AMIIM_CMD_LEGACY_WRITE 1 // 10/100/1000 Mbps Phy Write -#define AXGMAC_AMIIM_CMD_LEGACY_READ 2 // 10/100/1000 Mbps Phy Read -#define AXGMAC_AMIIM_CMD_MONITOR_SINGLE 3 // Monitor single PHY -#define AXGMAC_AMIIM_CMD_MONITOR_MULTIPLE 4 // Monitor multiple contiguous PHYs -#define AXGMAC_AMIIM_CMD_10G_OPERATION 5 // Present AMIIM Field Reg -#define AXGMAC_AMIIM_CMD_CLEAR_LINK_FAIL 6 // Clear Link Fail Bit in MIIM - -// A-XGMAC AMIIM Field Register -#define AXGMAC_AMIIM_FIELD_ST 0xC0000000 // 2-bit ST field +/* A-XGMAC Revision level */ +#define AXGMAC_REVISION_MASK 0x0000FFFF /* Revision level */ + +/* A-XGMAC AMIIM Command Register */ +#define AXGMAC_AMIIM_CMD_START 0x00000008 /* Command start */ +#define AXGMAC_AMIIM_CMD_MASK 0x00000007 /* Command */ +#define AXGMAC_AMIIM_CMD_LEGACY_WRITE 1 /* 10/100/1000 Mbps Phy Write */ +#define AXGMAC_AMIIM_CMD_LEGACY_READ 2 /* 10/100/1000 Mbps Phy Read */ +#define AXGMAC_AMIIM_CMD_MONITOR_SINGLE 3 /* Monitor single PHY */ +#define AXGMAC_AMIIM_CMD_MONITOR_MULTIPLE 4 /* Monitor multiple contiguous PHYs */ +#define AXGMAC_AMIIM_CMD_10G_OPERATION 5 /* Present AMIIM Field Reg */ +#define AXGMAC_AMIIM_CMD_CLEAR_LINK_FAIL 6 /* Clear Link Fail Bit in MIIM */ + +/* A-XGMAC AMIIM Field Register */ +#define AXGMAC_AMIIM_FIELD_ST 0xC0000000 /* 2-bit ST field */ #define AXGMAC_AMIIM_FIELD_ST_SHIFT 30 -#define AXGMAC_AMIIM_FIELD_OP 0x30000000 // 2-bit OP field +#define AXGMAC_AMIIM_FIELD_OP 0x30000000 /* 2-bit OP field */ #define AXGMAC_AMIIM_FIELD_OP_SHIFT 28 -#define AXGMAC_AMIIM_FIELD_PORT_ADDR 0x0F800000 // Port address field (hstphyadx in spec) +#define AXGMAC_AMIIM_FIELD_PORT_ADDR 0x0F800000 /* Port address field (hstphyadx in spec) */ #define AXGMAC_AMIIM_FIELD_PORT_SHIFT 23 -#define AXGMAC_AMIIM_FIELD_DEV_ADDR 0x007C0000 // Device address field (hstregadx in spec) +#define AXGMAC_AMIIM_FIELD_DEV_ADDR 0x007C0000 /* Device address field (hstregadx in spec) */ #define AXGMAC_AMIIM_FIELD_DEV_SHIFT 18 -#define AXGMAC_AMIIM_FIELD_TA 0x00030000 // 2-bit TA field +#define AXGMAC_AMIIM_FIELD_TA 0x00030000 /* 2-bit TA field */ #define AXGMAC_AMIIM_FIELD_TA_SHIFT 16 #define AXGMAC_AMIIM_FIELD_DATA 0x0000FFFF // Data field -// Values for the AXGMAC_AMIIM_FIELD_OP field in the A-XGMAC AMIIM Field Register -#define MIIM_OP_ADDR 0 // MIIM Address set operation -#define MIIM_OP_WRITE 1 // MIIM Write register operation -#define MIIM_OP_READ 2 // MIIM Read register operation +/* Values for the AXGMAC_AMIIM_FIELD_OP field in the A-XGMAC AMIIM Field Register */ +#define MIIM_OP_ADDR 0 /* MIIM Address set operation */ +#define MIIM_OP_WRITE 1 /* MIIM Write register operation */ +#define MIIM_OP_READ 2 /* MIIM Read register operation */ #define MIIM_OP_ADDR_SHIFT (MIIM_OP_ADDR << AXGMAC_AMIIM_FIELD_OP_SHIFT) -// Values for the AXGMAC_AMIIM_FIELD_PORT_ADDR field in the A-XGMAC AMIIM Field Register -#define MIIM_PORT_NUM 1 // All Sahara MIIM modules use port 1 - -// Values for the AXGMAC_AMIIM_FIELD_DEV_ADDR field in the A-XGMAC AMIIM Field Register -#define MIIM_DEV_PHY_PMA 1 // PHY PMA/PMD module MIIM device number -#define MIIM_DEV_PHY_PCS 3 // PHY PCS module MIIM device number -#define MIIM_DEV_PHY_XS 4 // PHY XS module MIIM device number -#define MIIM_DEV_XGXS 5 // XGXS MIIM device number - -// Values for the AXGMAC_AMIIM_FIELD_TA field in the A-XGMAC AMIIM Field Register -#define MIIM_TA_10GB 2 // set to 2 for 10 GB operation - -// A-XGMAC AMIIM Configuration Register -#define AXGMAC_AMIIM_CFG_NOPREAM 0x00000080 // Bypass preamble of mngmt frame -#define AXGMAC_AMIIM_CFG_HALF_CLOCK 0x0000007F // half-clock duration of MDC output - -// A-XGMAC AMIIM Indicator Register -#define AXGMAC_AMIIM_INDC_LINK 0x00000010 // Link status from legacy PHY or MMD -#define AXGMAC_AMIIM_INDC_MPHY 0x00000008 // Multiple phy operation in progress -#define AXGMAC_AMIIM_INDC_SPHY 0x00000004 // Single phy operation in progress -#define AXGMAC_AMIIM_INDC_MON 0x00000002 // Single or multiple monitor cmd -#define AXGMAC_AMIIM_INDC_BUSY 0x00000001 // Set until cmd operation complete - -// Link Status and Control Register -#define LS_PHY_CLR_RESET 0x80000000 // Clear reset signal to PHY -#define LS_SERDES_POWER_DOWN 0x40000000 // Power down the Sahara Serdes -#define LS_XGXS_ENABLE 0x20000000 // Enable the XAUI XGXS logic -#define LS_XGXS_CTL 0x10000000 // Hold XAUI XGXS logic reset until Serdes is up -#define LS_SERDES_DOWN 0x08000000 // When 0, XAUI Serdes is up and initialization is complete -#define LS_TRACE_DOWN 0x04000000 // When 0, Trace Serdes is up and initialization is complete -#define LS_PHY_CLK_25MHZ 0x02000000 // Set PHY clock to 25 MHz (else 156.125 MHz) -#define LS_PHY_CLK_EN 0x01000000 // Enable clock to PHY -#define LS_XAUI_LINK_UP 0x00000010 // XAUI link is up -#define LS_XAUI_LINK_CHNG 0x00000008 // XAUI link status has changed -#define LS_LINK_ALARM 0x00000004 // Link alarm pin -#define LS_ATTN_CTRL_MASK 0x00000003 // Mask link attention control bits -#define LS_ATTN_ALARM 0x00000000 // 00 => Attn on link alarm -#define LS_ATTN_ALARM_OR_STAT_CHNG 0x00000001 // 01 => Attn on link alarm or status change -#define LS_ATTN_STAT_CHNG 0x00000002 // 10 => Attn on link status change -#define LS_ATTN_NONE 0x00000003 // 11 => no Attn - -// Link Address High Registers -#define LINK_ADDR_ENABLE 0x80000000 // Enable this link address - - -/*************************************************************************** +/* Values for the AXGMAC_AMIIM_FIELD_PORT_ADDR field in the A-XGMAC AMIIM Field Register */ +#define MIIM_PORT_NUM 1 /* All Sahara MIIM modules use port 1 */ + +/* Values for the AXGMAC_AMIIM_FIELD_DEV_ADDR field in the A-XGMAC AMIIM Field Register */ +#define MIIM_DEV_PHY_PMA 1 /* PHY PMA/PMD module MIIM device number */ +#define MIIM_DEV_PHY_PCS 3 /* PHY PCS module MIIM device number */ +#define MIIM_DEV_PHY_XS 4 /* PHY XS module MIIM device number */ +#define MIIM_DEV_XGXS 5 /* XGXS MIIM device number */ + +/* Values for the AXGMAC_AMIIM_FIELD_TA field in the A-XGMAC AMIIM Field Register */ +#define MIIM_TA_10GB 2 /* set to 2 for 10 GB operation */ + +/* A-XGMAC AMIIM Configuration Register */ +#define AXGMAC_AMIIM_CFG_NOPREAM 0x00000080 /* Bypass preamble of mngmt frame */ +#define AXGMAC_AMIIM_CFG_HALF_CLOCK 0x0000007F /* half-clock duration of MDC output */ + +/* A-XGMAC AMIIM Indicator Register */ +#define AXGMAC_AMIIM_INDC_LINK 0x00000010 /* Link status from legacy PHY or MMD */ +#define AXGMAC_AMIIM_INDC_MPHY 0x00000008 /* Multiple phy operation in progress */ +#define AXGMAC_AMIIM_INDC_SPHY 0x00000004 /* Single phy operation in progress */ +#define AXGMAC_AMIIM_INDC_MON 0x00000002 /* Single or multiple monitor cmd */ +#define AXGMAC_AMIIM_INDC_BUSY 0x00000001 /* Set until cmd operation complete */ + +/* Link Status and Control Register */ +#define LS_PHY_CLR_RESET 0x80000000 /* Clear reset signal to PHY */ +#define LS_SERDES_POWER_DOWN 0x40000000 /* Power down the Sahara Serdes */ +#define LS_XGXS_ENABLE 0x20000000 /* Enable the XAUI XGXS logic */ +#define LS_XGXS_CTL 0x10000000 /* Hold XAUI XGXS logic reset until Serdes is up */ +#define LS_SERDES_DOWN 0x08000000 /* When 0, XAUI Serdes is up and initialization is complete */ +#define LS_TRACE_DOWN 0x04000000 /* When 0, Trace Serdes is up and initialization is complete */ +#define LS_PHY_CLK_25MHZ 0x02000000 /* Set PHY clock to 25 MHz (else 156.125 MHz) */ +#define LS_PHY_CLK_EN 0x01000000 /* Enable clock to PHY */ +#define LS_XAUI_LINK_UP 0x00000010 /* XAUI link is up */ +#define LS_XAUI_LINK_CHNG 0x00000008 /* XAUI link status has changed */ +#define LS_LINK_ALARM 0x00000004 /* Link alarm pin */ +#define LS_ATTN_CTRL_MASK 0x00000003 /* Mask link attention control bits */ +#define LS_ATTN_ALARM 0x00000000 /* 00 => Attn on link alarm */ +#define LS_ATTN_ALARM_OR_STAT_CHNG 0x00000001 /* 01 => Attn on link alarm or status change */ +#define LS_ATTN_STAT_CHNG 0x00000002 /* 10 => Attn on link status change */ +#define LS_ATTN_NONE 0x00000003 /* 11 => no Attn */ + +/* Link Address High Registers */ +#define LINK_ADDR_ENABLE 0x80000000 /* Enable this link address */ + + +/* * XGXS XAUI XGMII Extender registers * * Full register descriptions can be found in mxgxs.pdf - ***************************************************************************/ -// XGXS Register Map -#define XGXS_ADDRESS_CONTROL1 0x0000 // XS Control 1 -#define XGXS_ADDRESS_STATUS1 0x0001 // XS Status 1 -#define XGXS_ADDRESS_DEVID_LOW 0x0002 // XS Device ID (low) -#define XGXS_ADDRESS_DEVID_HIGH 0x0003 // XS Device ID (high) -#define XGXS_ADDRESS_SPEED 0x0004 // XS Speed ability -#define XGXS_ADDRESS_DEV_LOW 0x0005 // XS Devices in package -#define XGXS_ADDRESS_DEV_HIGH 0x0006 // XS Devices in package -#define XGXS_ADDRESS_STATUS2 0x0008 // XS Status 2 -#define XGXS_ADDRESS_PKGID_lOW 0x000E // XS Package Identifier -#define XGXS_ADDRESS_PKGID_HIGH 0x000F // XS Package Identifier -#define XGXS_ADDRESS_LANE_STATUS 0x0018 // 10G XGXS Lane Status -#define XGXS_ADDRESS_TEST_CTRL 0x0019 // 10G XGXS Test Control -#define XGXS_ADDRESS_RESET_LO1 0x8000 // Vendor-Specific Reset Lo 1 -#define XGXS_ADDRESS_RESET_LO2 0x8001 // Vendor-Specific Reset Lo 2 -#define XGXS_ADDRESS_RESET_HI1 0x8002 // Vendor-Specific Reset Hi 1 -#define XGXS_ADDRESS_RESET_HI2 0x8003 // Vendor-Specific Reset Hi 2 - -// XS Control 1 register bit definitions -#define XGXS_CONTROL1_RESET 0x8000 // Reset - self clearing -#define XGXS_CONTROL1_LOOPBACK 0x4000 // Enable loopback -#define XGXS_CONTROL1_SPEED1 0x2000 // 0 = unspecified, 1 = 10Gb+ -#define XGXS_CONTROL1_LOWPOWER 0x0400 // 1 = Low power mode -#define XGXS_CONTROL1_SPEED2 0x0040 // Same as SPEED1 (?) -#define XGXS_CONTROL1_SPEED 0x003C // Everything reserved except zero (?) - -// XS Status 1 register bit definitions -#define XGXS_STATUS1_FAULT 0x0080 // Fault detected -#define XGXS_STATUS1_LINK 0x0004 // 1 = Link up -#define XGXS_STATUS1_LOWPOWER 0x0002 // 1 = Low power supported - -// XS Speed register bit definitions -#define XGXS_SPEED_10G 0x0001 // 1 = 10G capable - -// XS Devices register bit definitions -#define XGXS_DEVICES_DTE 0x0020 // DTE XS Present -#define XGXS_DEVICES_PHY 0x0010 // PHY XS Present -#define XGXS_DEVICES_PCS 0x0008 // PCS Present -#define XGXS_DEVICES_WIS 0x0004 // WIS Present -#define XGXS_DEVICES_PMD 0x0002 // PMD/PMA Present -#define XGXS_DEVICES_CLAUSE22 0x0001 // Clause 22 registers present - -// XS Devices High register bit definitions -#define XGXS_DEVICES_VENDOR2 0x8000 // Vendor specific device 2 -#define XGXS_DEVICES_VENDOR1 0x4000 // Vendor specific device 1 - -// XS Status 2 register bit definitions -#define XGXS_STATUS2_DEV_MASK 0xC000 // Device present mask -#define XGXS_STATUS2_DEV_RESPOND 0x8000 // Device responding -#define XGXS_STATUS2_XMT_FAULT 0x0800 // Transmit fault -#define XGXS_STATUS2_RCV_FAULT 0x0400 // Receive fault - -// XS Package ID High register bit definitions -#define XGXS_PKGID_HIGH_ORG 0xFC00 // Organizationally Unique -#define XGXS_PKGID_HIGH_MFG 0x03F0 // Manufacturer Model -#define XGXS_PKGID_HIGH_REV 0x000F // Revision Number - -// XS Lane Status register bit definitions -#define XGXS_LANE_PHY 0x1000 // PHY/DTE lane alignment status -#define XGXS_LANE_PATTERN 0x0800 // Pattern testing ability -#define XGXS_LANE_LOOPBACK 0x0400 // PHY loopback ability -#define XGXS_LANE_SYNC3 0x0008 // Lane 3 sync -#define XGXS_LANE_SYNC2 0x0004 // Lane 2 sync -#define XGXS_LANE_SYNC1 0x0002 // Lane 1 sync -#define XGXS_LANE_SYNC0 0x0001 // Lane 0 sync - -// XS Test Control register bit definitions -#define XGXS_TEST_PATTERN_ENABLE 0x0004 // Test pattern enabled -#define XGXS_TEST_PATTERN_MASK 0x0003 // Test patterns -#define XGXS_TEST_PATTERN_RSVD 0x0003 // Test pattern - reserved -#define XGXS_TEST_PATTERN_MIX 0x0002 // Test pattern - mixed -#define XGXS_TEST_PATTERN_LOW 0x0001 // Test pattern - low -#define XGXS_TEST_PATTERN_HIGH 0x0001 // Test pattern - high - -/*************************************************************************** + */ +/* XGXS Register Map */ +#define XGXS_ADDRESS_CONTROL1 0x0000 /* XS Control 1 */ +#define XGXS_ADDRESS_STATUS1 0x0001 /* XS Status 1 */ +#define XGXS_ADDRESS_DEVID_LOW 0x0002 /* XS Device ID (low) */ +#define XGXS_ADDRESS_DEVID_HIGH 0x0003 /* XS Device ID (high) */ +#define XGXS_ADDRESS_SPEED 0x0004 /* XS Speed ability */ +#define XGXS_ADDRESS_DEV_LOW 0x0005 /* XS Devices in package */ +#define XGXS_ADDRESS_DEV_HIGH 0x0006 /* XS Devices in package */ +#define XGXS_ADDRESS_STATUS2 0x0008 /* XS Status 2 */ +#define XGXS_ADDRESS_PKGID_lOW 0x000E /* XS Package Identifier */ +#define XGXS_ADDRESS_PKGID_HIGH 0x000F /* XS Package Identifier */ +#define XGXS_ADDRESS_LANE_STATUS 0x0018 /* 10G XGXS Lane Status */ +#define XGXS_ADDRESS_TEST_CTRL 0x0019 /* 10G XGXS Test Control */ +#define XGXS_ADDRESS_RESET_LO1 0x8000 /* Vendor-Specific Reset Lo 1 */ +#define XGXS_ADDRESS_RESET_LO2 0x8001 /* Vendor-Specific Reset Lo 2 */ +#define XGXS_ADDRESS_RESET_HI1 0x8002 /* Vendor-Specific Reset Hi 1 */ +#define XGXS_ADDRESS_RESET_HI2 0x8003 /* Vendor-Specific Reset Hi 2 */ + +/* XS Control 1 register bit definitions */ +#define XGXS_CONTROL1_RESET 0x8000 /* Reset - self clearing */ +#define XGXS_CONTROL1_LOOPBACK 0x4000 /* Enable loopback */ +#define XGXS_CONTROL1_SPEED1 0x2000 /* 0 = unspecified, 1 = 10Gb+ */ +#define XGXS_CONTROL1_LOWPOWER 0x0400 /* 1 = Low power mode */ +#define XGXS_CONTROL1_SPEED2 0x0040 /* Same as SPEED1 (?) */ +#define XGXS_CONTROL1_SPEED 0x003C /* Everything reserved except zero (?) */ + +/* XS Status 1 register bit definitions */ +#define XGXS_STATUS1_FAULT 0x0080 /* Fault detected */ +#define XGXS_STATUS1_LINK 0x0004 /* 1 = Link up */ +#define XGXS_STATUS1_LOWPOWER 0x0002 /* 1 = Low power supported */ + +/* XS Speed register bit definitions */ +#define XGXS_SPEED_10G 0x0001 /* 1 = 10G capable */ + +/* XS Devices register bit definitions */ +#define XGXS_DEVICES_DTE 0x0020 /* DTE XS Present */ +#define XGXS_DEVICES_PHY 0x0010 /* PHY XS Present */ +#define XGXS_DEVICES_PCS 0x0008 /* PCS Present */ +#define XGXS_DEVICES_WIS 0x0004 /* WIS Present */ +#define XGXS_DEVICES_PMD 0x0002 /* PMD/PMA Present */ +#define XGXS_DEVICES_CLAUSE22 0x0001 /* Clause 22 registers present */ + +/* XS Devices High register bit definitions */ +#define XGXS_DEVICES_VENDOR2 0x8000 /* Vendor specific device 2 */ +#define XGXS_DEVICES_VENDOR1 0x4000 /* Vendor specific device 1 */ + +/* XS Status 2 register bit definitions */ +#define XGXS_STATUS2_DEV_MASK 0xC000 /* Device present mask */ +#define XGXS_STATUS2_DEV_RESPOND 0x8000 /* Device responding */ +#define XGXS_STATUS2_XMT_FAULT 0x0800 /* Transmit fault */ +#define XGXS_STATUS2_RCV_FAULT 0x0400 /* Receive fault */ + +/* XS Package ID High register bit definitions */ +#define XGXS_PKGID_HIGH_ORG 0xFC00 /* Organizationally Unique */ +#define XGXS_PKGID_HIGH_MFG 0x03F0 /* Manufacturer Model */ +#define XGXS_PKGID_HIGH_REV 0x000F /* Revision Number */ + +/* XS Lane Status register bit definitions */ +#define XGXS_LANE_PHY 0x1000 /* PHY/DTE lane alignment status */ +#define XGXS_LANE_PATTERN 0x0800 /* Pattern testing ability */ +#define XGXS_LANE_LOOPBACK 0x0400 /* PHY loopback ability */ +#define XGXS_LANE_SYNC3 0x0008 /* Lane 3 sync */ +#define XGXS_LANE_SYNC2 0x0004 /* Lane 2 sync */ +#define XGXS_LANE_SYNC1 0x0002 /* Lane 1 sync */ +#define XGXS_LANE_SYNC0 0x0001 /* Lane 0 sync */ + +/* XS Test Control register bit definitions */ +#define XGXS_TEST_PATTERN_ENABLE 0x0004 /* Test pattern enabled */ +#define XGXS_TEST_PATTERN_MASK 0x0003 /* Test patterns */ +#define XGXS_TEST_PATTERN_RSVD 0x0003 /* Test pattern - reserved */ +#define XGXS_TEST_PATTERN_MIX 0x0002 /* Test pattern - mixed */ +#define XGXS_TEST_PATTERN_LOW 0x0001 /* Test pattern - low */ +#define XGXS_TEST_PATTERN_HIGH 0x0001 /* Test pattern - high */ + +/* * External MDIO Bus Registers * * Full register descriptions can be found in PHY/XENPAK/IEEE specs - ***************************************************************************/ -// LASI (Link Alarm Status Interrupt) Registers (located in MIIM_DEV_PHY_PMA device) -#define LASI_RX_ALARM_CONTROL 0x9000 // LASI RX_ALARM Control -#define LASI_TX_ALARM_CONTROL 0x9001 // LASI TX_ALARM Control -#define LASI_CONTROL 0x9002 // LASI Control -#define LASI_RX_ALARM_STATUS 0x9003 // LASI RX_ALARM Status -#define LASI_TX_ALARM_STATUS 0x9004 // LASI TX_ALARM Status -#define LASI_STATUS 0x9005 // LASI Status - -// LASI_CONTROL bit definitions -#define LASI_CTL_RX_ALARM_ENABLE 0x0004 // Enable RX_ALARM interrupts -#define LASI_CTL_TX_ALARM_ENABLE 0x0002 // Enable TX_ALARM interrupts -#define LASI_CTL_LS_ALARM_ENABLE 0x0001 // Enable Link Status interrupts - -// LASI_STATUS bit definitions -#define LASI_STATUS_RX_ALARM 0x0004 // RX_ALARM status -#define LASI_STATUS_TX_ALARM 0x0002 // TX_ALARM status -#define LASI_STATUS_LS_ALARM 0x0001 // Link Status - -// PHY registers - PMA/PMD (device 1) -#define PHY_PMA_CONTROL1 0x0000 // PMA/PMD Control 1 -#define PHY_PMA_STATUS1 0x0001 // PMA/PMD Status 1 -#define PHY_PMA_RCV_DET 0x000A // PMA/PMD Receive Signal Detect - // other PMA/PMD registers exist and can be defined as needed - -// PHY registers - PCS (device 3) -#define PHY_PCS_CONTROL1 0x0000 // PCS Control 1 -#define PHY_PCS_STATUS1 0x0001 // PCS Status 1 -#define PHY_PCS_10G_STATUS1 0x0020 // PCS 10GBASE-R Status 1 - // other PCS registers exist and can be defined as needed - -// PHY registers - XS (device 4) -#define PHY_XS_CONTROL1 0x0000 // XS Control 1 -#define PHY_XS_STATUS1 0x0001 // XS Status 1 -#define PHY_XS_LANE_STATUS 0x0018 // XS Lane Status - // other XS registers exist and can be defined as needed - -// PHY_PMA_CONTROL1 register bit definitions -#define PMA_CONTROL1_RESET 0x8000 // PMA/PMD reset - -// PHY_PMA_RCV_DET register bit definitions -#define PMA_RCV_DETECT 0x0001 // PMA/PMD receive signal detect - -// PHY_PCS_10G_STATUS1 register bit definitions -#define PCS_10B_BLOCK_LOCK 0x0001 // PCS 10GBASE-R locked to receive blocks - -// PHY_XS_LANE_STATUS register bit definitions -#define XS_LANE_ALIGN 0x1000 // XS transmit lanes aligned - -// PHY Microcode download data structure + */ +/* LASI (Link Alarm Status Interrupt) Registers (located in MIIM_DEV_PHY_PMA device) */ +#define LASI_RX_ALARM_CONTROL 0x9000 /* LASI RX_ALARM Control */ +#define LASI_TX_ALARM_CONTROL 0x9001 /* LASI TX_ALARM Control */ +#define LASI_CONTROL 0x9002 /* LASI Control */ +#define LASI_RX_ALARM_STATUS 0x9003 /* LASI RX_ALARM Status */ +#define LASI_TX_ALARM_STATUS 0x9004 /* LASI TX_ALARM Status */ +#define LASI_STATUS 0x9005 /* LASI Status */ + +/* LASI_CONTROL bit definitions */ +#define LASI_CTL_RX_ALARM_ENABLE 0x0004 /* Enable RX_ALARM interrupts */ +#define LASI_CTL_TX_ALARM_ENABLE 0x0002 /* Enable TX_ALARM interrupts */ +#define LASI_CTL_LS_ALARM_ENABLE 0x0001 /* Enable Link Status interrupts */ + +/* LASI_STATUS bit definitions */ +#define LASI_STATUS_RX_ALARM 0x0004 /* RX_ALARM status */ +#define LASI_STATUS_TX_ALARM 0x0002 /* TX_ALARM status */ +#define LASI_STATUS_LS_ALARM 0x0001 /* Link Status */ + +/* PHY registers - PMA/PMD (device 1) */ +#define PHY_PMA_CONTROL1 0x0000 /* PMA/PMD Control 1 */ +#define PHY_PMA_STATUS1 0x0001 /* PMA/PMD Status 1 */ +#define PHY_PMA_RCV_DET 0x000A /* PMA/PMD Receive Signal Detect */ + /* other PMA/PMD registers exist and can be defined as needed */ + +/* PHY registers - PCS (device 3) */ +#define PHY_PCS_CONTROL1 0x0000 /* PCS Control 1 */ +#define PHY_PCS_STATUS1 0x0001 /* PCS Status 1 */ +#define PHY_PCS_10G_STATUS1 0x0020 /* PCS 10GBASE-R Status 1 */ + /* other PCS registers exist and can be defined as needed */ + +/* PHY registers - XS (device 4) */ +#define PHY_XS_CONTROL1 0x0000 /* XS Control 1 */ +#define PHY_XS_STATUS1 0x0001 /* XS Status 1 */ +#define PHY_XS_LANE_STATUS 0x0018 /* XS Lane Status */ + /* other XS registers exist and can be defined as needed */ + +/* PHY_PMA_CONTROL1 register bit definitions */ +#define PMA_CONTROL1_RESET 0x8000 /* PMA/PMD reset */ + +/* PHY_PMA_RCV_DET register bit definitions */ +#define PMA_RCV_DETECT 0x0001 /* PMA/PMD receive signal detect */ + +/* PHY_PCS_10G_STATUS1 register bit definitions */ +#define PCS_10B_BLOCK_LOCK 0x0001 /* PCS 10GBASE-R locked to receive blocks */ + +/* PHY_XS_LANE_STATUS register bit definitions */ +#define XS_LANE_ALIGN 0x1000 /* XS transmit lanes aligned */ + +/* PHY Microcode download data structure */ struct phy_ucode { ushort Addr; ushort Data; }; +/* Slow Bus Register Definitions */ -/***************************************************************************** - * Slow Bus Register Definitions - *****************************************************************************/ - -// Module 0 registers -#define GPIO_L_IN 0x15 // GPIO input (low) -#define GPIO_L_OUT 0x16 // GPIO output (low) -#define GPIO_L_DIR 0x17 // GPIO direction (low) -#define GPIO_H_IN 0x19 // GPIO input (high) -#define GPIO_H_OUT 0x1A // GPIO output (high) -#define GPIO_H_DIR 0x1B // GPIO direction (high) +/* Module 0 registers */ +#define GPIO_L_IN 0x15 /* GPIO input (low) */ +#define GPIO_L_OUT 0x16 /* GPIO output (low) */ +#define GPIO_L_DIR 0x17 /* GPIO direction (low) */ +#define GPIO_H_IN 0x19 /* GPIO input (high) */ +#define GPIO_H_OUT 0x1A /* GPIO output (high) */ +#define GPIO_H_DIR 0x1B /* GPIO direction (high) */ -// Definitions for other slow bus registers can be added as needed +/* Definitions for other slow bus registers can be added as needed */ -/***************************************************************************** +/* * Transmit Sequencer Command Descriptor definitions - *****************************************************************************/ - -// This descriptor must be placed in GRAM. The address of this descriptor -// (along with a couple of control bits) is pushed onto the PxhCmdQ or PxlCmdQ -// (Proxy high or low command queue). This data is read by the Proxy Sequencer, -// which pushes it onto the XmtCmdQ, which is (eventually) read by the Transmit -// Sequencer, causing a packet to be transmitted. Not all fields are valid for -// all commands - see the Sahara spec for details. Note that this structure is -// only valid when compiled on a little endian machine. + * + * This descriptor must be placed in GRAM. The address of this descriptor + * (along with a couple of control bits) is pushed onto the PxhCmdQ or PxlCmdQ + * (Proxy high or low command queue). This data is read by the Proxy Sequencer, + * which pushes it onto the XmtCmdQ, which is (eventually) read by the Transmit + * Sequencer, causing a packet to be transmitted. Not all fields are valid for + * all commands - see the Sahara spec for details. Note that this structure is + * only valid when compiled on a little endian machine. + */ #pragma pack(push, 1) struct xmt_desc { - ushort XmtLen; // word 0, bits [15:0] - transmit length - unsigned char XmtCtl; // word 0, bits [23:16] - transmit control byte - unsigned char Cmd; // word 0, bits [31:24] - transmit command plus misc. - u32 XmtBufId; // word 1, bits [31:0] - transmit buffer ID - unsigned char TcpStrt; // word 2, bits [7:0] - byte address of TCP header - unsigned char IpStrt; // word 2, bits [15:8] - byte address of IP header - ushort IpCkSum; // word 2, bits [31:16] - partial IP checksum - ushort TcpCkSum; // word 3, bits [15:0] - partial TCP checksum - ushort Rsvd1; // word 3, bits [31:16] - PAD - u32 Rsvd2; // word 4, bits [31:0] - PAD - u32 Rsvd3; // word 5, bits [31:0] - PAD - u32 Rsvd4; // word 6, bits [31:0] - PAD - u32 Rsvd5; // word 7, bits [31:0] - PAD + ushort XmtLen; /* word 0, bits [15:0] - transmit length */ + unsigned char XmtCtl; /* word 0, bits [23:16] - transmit control byte */ + unsigned char Cmd; /* word 0, bits [31:24] - transmit command plus misc. */ + u32 XmtBufId; /* word 1, bits [31:0] - transmit buffer ID */ + unsigned char TcpStrt; /* word 2, bits [7:0] - byte address of TCP header */ + unsigned char IpStrt; /* word 2, bits [15:8] - byte address of IP header */ + ushort IpCkSum; /* word 2, bits [31:16] - partial IP checksum */ + ushort TcpCkSum; /* word 3, bits [15:0] - partial TCP checksum */ + ushort Rsvd1; /* word 3, bits [31:16] - PAD */ + u32 Rsvd2; /* word 4, bits [31:0] - PAD */ + u32 Rsvd3; /* word 5, bits [31:0] - PAD */ + u32 Rsvd4; /* word 6, bits [31:0] - PAD */ + u32 Rsvd5; /* word 7, bits [31:0] - PAD */ }; #pragma pack(pop) -// struct xmt_desc Cmd byte definitions - // command codes -#define XMT_DESC_CMD_RAW_SEND 0 // raw send descriptor -#define XMT_DESC_CMD_CSUM_INSERT 1 // checksum insert descriptor -#define XMT_DESC_CMD_FORMAT 2 // format descriptor -#define XMT_DESC_CMD_PRIME 3 // prime descriptor -#define XMT_DESC_CMD_CODE_SHFT 6 // comand code shift (shift to bits [31:30] in word 0) - // shifted command codes +/* struct xmt_desc Cmd byte definitions */ + /* command codes */ +#define XMT_DESC_CMD_RAW_SEND 0 /* raw send descriptor */ +#define XMT_DESC_CMD_CSUM_INSERT 1 /* checksum insert descriptor */ +#define XMT_DESC_CMD_FORMAT 2 /* format descriptor */ +#define XMT_DESC_CMD_PRIME 3 /* prime descriptor */ +#define XMT_DESC_CMD_CODE_SHFT 6 /* comand code shift (shift to bits [31:30] in word 0) */ + /* shifted command codes */ #define XMT_RAW_SEND (XMT_DESC_CMD_RAW_SEND << XMT_DESC_CMD_CODE_SHFT) #define XMT_CSUM_INSERT (XMT_DESC_CMD_CSUM_INSERT << XMT_DESC_CMD_CODE_SHFT) #define XMT_FORMAT (XMT_DESC_CMD_FORMAT << XMT_DESC_CMD_CODE_SHFT) #define XMT_PRIME (XMT_DESC_CMD_PRIME << XMT_DESC_CMD_CODE_SHFT) -// struct xmt_desc Control Byte (XmtCtl) definitions -// NOTE: These bits do not work on Sahara (Rev A)! -#define XMT_CTL_PAUSE_FRAME 0x80 // current frame is a pause control frame (for statistics) -#define XMT_CTL_CONTROL_FRAME 0x40 // current frame is a control frame (for statistics) -#define XMT_CTL_PER_PKT_QUAL 0x20 // per packet qualifier -#define XMT_CTL_PAD_MODE_NONE 0x00 // do not pad frame -#define XMT_CTL_PAD_MODE_64 0x08 // pad frame to 64 bytes -#define XMT_CTL_PAD_MODE_VLAN_68 0x10 // pad frame to 64 bytes, and VLAN frames to 68 bytes -#define XMT_CTL_PAD_MODE_68 0x18 // pad frame to 68 bytes -#define XMT_CTL_GEN_FCS 0x04 // generate FCS (CRC) for this frame -#define XMT_CTL_DELAY_FCS_0 0x00 // do not delay FCS calcution -#define XMT_CTL_DELAY_FCS_1 0x01 // delay FCS calculation by 1 (4-byte) word -#define XMT_CTL_DELAY_FCS_2 0x02 // delay FCS calculation by 2 (4-byte) words -#define XMT_CTL_DELAY_FCS_3 0x03 // delay FCS calculation by 3 (4-byte) words - -// struct xmt_desc XmtBufId definition -#define XMT_BUF_ID_SHFT 8 // The Xmt buffer ID is formed by dividing - // the buffer (DRAM) address by 256 (or << 8) - -/***************************************************************************** - * Receiver Sequencer Definitions - *****************************************************************************/ - -// Receive Event Queue (queues 3 - 6) bit definitions -#define RCV_EVTQ_RBFID_MASK 0x0000FFFF // bit mask for the Receive Buffer ID - -// Receive Buffer ID definition -#define RCV_BUF_ID_SHFT 5 // The Rcv buffer ID is formed by dividing - // the buffer (DRAM) address by 32 (or << 5) - -// Format of the 18 byte Receive Buffer returned by the -// Receive Sequencer for received packets +/* + * struct xmt_desc Control Byte (XmtCtl) definitions + * NOTE: These bits do not work on Sahara (Rev A)! + */ +#define XMT_CTL_PAUSE_FRAME 0x80 /* current frame is a pause control frame (for statistics) */ +#define XMT_CTL_CONTROL_FRAME 0x40 /* current frame is a control frame (for statistics) */ +#define XMT_CTL_PER_PKT_QUAL 0x20 /* per packet qualifier */ +#define XMT_CTL_PAD_MODE_NONE 0x00 /* do not pad frame */ +#define XMT_CTL_PAD_MODE_64 0x08 /* pad frame to 64 bytes */ +#define XMT_CTL_PAD_MODE_VLAN_68 0x10 /* pad frame to 64 bytes, and VLAN frames to 68 bytes */ +#define XMT_CTL_PAD_MODE_68 0x18 /* pad frame to 68 bytes */ +#define XMT_CTL_GEN_FCS 0x04 /* generate FCS (CRC) for this frame */ +#define XMT_CTL_DELAY_FCS_0 0x00 /* do not delay FCS calcution */ +#define XMT_CTL_DELAY_FCS_1 0x01 /* delay FCS calculation by 1 (4-byte) word */ +#define XMT_CTL_DELAY_FCS_2 0x02 /* delay FCS calculation by 2 (4-byte) words */ +#define XMT_CTL_DELAY_FCS_3 0x03 /* delay FCS calculation by 3 (4-byte) words */ + +/* struct xmt_desc XmtBufId definition */ +#define XMT_BUF_ID_SHFT 8 /* The Xmt buffer ID is formed by dividing */ + /* the buffer (DRAM) address by 256 (or << 8) */ + +/* Receiver Sequencer Definitions */ + +/* Receive Event Queue (queues 3 - 6) bit definitions */ +#define RCV_EVTQ_RBFID_MASK 0x0000FFFF /* bit mask for the Receive Buffer ID */ + +/* Receive Buffer ID definition */ +#define RCV_BUF_ID_SHFT 5 /* The Rcv buffer ID is formed by dividing */ + /* the buffer (DRAM) address by 32 (or << 5) */ + +/* + * Format of the 18 byte Receive Buffer returned by the + * Receive Sequencer for received packets + */ #pragma pack(push, 1) struct rcv_buf_hdr { - u32 Status; // Status word from Rcv Seq Parser - ushort Length; // Rcv packet byte count + u32 Status; /* Status word from Rcv Seq Parser */ + ushort Length; /* Rcv packet byte count */ union { - ushort TcpCsum; // TCP checksum + ushort TcpCsum; /* TCP checksum */ struct { - unsigned char TcpCsumL; // lower 8 bits of the TCP checksum - unsigned char LinkHash; // Link hash (multicast frames only) + unsigned char TcpCsumL; /* lower 8 bits of the TCP checksum */ + unsigned char LinkHash; /* Link hash (multicast frames only) */ }; }; - ushort SktHash; // Socket hash - unsigned char TcpHdrOffset; // TCP header offset into packet - unsigned char IpHdrOffset; // IP header offset into packet - u32 TpzHash; // Toeplitz hash - ushort Reserved; // Reserved + ushort SktHash; /* Socket hash */ + unsigned char TcpHdrOffset; /* TCP header offset into packet */ + unsigned char IpHdrOffset; /* IP header offset into packet */ + u32 TpzHash; /* Toeplitz hash */ + ushort Reserved; /* Reserved */ }; #pragma pack(pop) - -/***************************************************************************** - * Queue definitions - *****************************************************************************/ +/* Queue definitions */ /* Ingress (read only) queue numbers */ -#define PXY_BUF_Q 0 /* Proxy Buffer Queue */ -#define HST_EVT_Q 1 /* Host Event Queue */ -#define XMT_BUF_Q 2 /* Transmit Buffer Queue */ -#define SKT_EVL_Q 3 /* RcvSqr Socket Event Low Priority Queue */ -#define RCV_EVL_Q 4 /* RcvSqr Rcv Event Low Priority Queue */ -#define SKT_EVH_Q 5 /* RcvSqr Socket Event High Priority Queue */ -#define RCV_EVH_Q 6 /* RcvSqr Rcv Event High Priority Queue */ -#define DMA_RSP_Q 7 /* Dma Response Queue - one per CPU context */ +#define PXY_BUF_Q 0 /* Proxy Buffer Queue */ +#define HST_EVT_Q 1 /* Host Event Queue */ +#define XMT_BUF_Q 2 /* Transmit Buffer Queue */ +#define SKT_EVL_Q 3 /* RcvSqr Socket Event Low Priority Queue */ +#define RCV_EVL_Q 4 /* RcvSqr Rcv Event Low Priority Queue */ +#define SKT_EVH_Q 5 /* RcvSqr Socket Event High Priority Queue */ +#define RCV_EVH_Q 6 /* RcvSqr Rcv Event High Priority Queue */ +#define DMA_RSP_Q 7 /* Dma Response Queue - one per CPU context */ /* Local (read/write) queue numbers */ -#define LOCAL_A_Q 8 /* Spare local Queue */ -#define LOCAL_B_Q 9 /* Spare local Queue */ -#define LOCAL_C_Q 10 /* Spare local Queue */ -#define FSM_EVT_Q 11 /* Finite-State-Machine Event Queue */ -#define SBF_PAL_Q 12 /* System Buffer Physical Address (low) Queue */ -#define SBF_PAH_Q 13 /* System Buffer Physical Address (high) Queue */ -#define SBF_VAL_Q 14 /* System Buffer Virtual Address (low) Queue */ -#define SBF_VAH_Q 15 /* System Buffer Virtual Address (high) Queue */ +#define LOCAL_A_Q 8 /* Spare local Queue */ +#define LOCAL_B_Q 9 /* Spare local Queue */ +#define LOCAL_C_Q 10 /* Spare local Queue */ +#define FSM_EVT_Q 11 /* Finite-State-Machine Event Queue */ +#define SBF_PAL_Q 12 /* System Buffer Physical Address (low) Queue */ +#define SBF_PAH_Q 13 /* System Buffer Physical Address (high) Queue */ +#define SBF_VAL_Q 14 /* System Buffer Virtual Address (low) Queue */ +#define SBF_VAH_Q 15 /* System Buffer Virtual Address (high) Queue */ /* Egress (write only) queue numbers */ -#define H2G_CMD_Q 16 /* Host to GlbRam DMA Command Queue */ -#define H2D_CMD_Q 17 /* Host to DRAM DMA Command Queue */ -#define G2H_CMD_Q 18 /* GlbRam to Host DMA Command Queue */ -#define G2D_CMD_Q 19 /* GlbRam to DRAM DMA Command Queue */ -#define D2H_CMD_Q 20 /* DRAM to Host DMA Command Queue */ -#define D2G_CMD_Q 21 /* DRAM to GlbRam DMA Command Queue */ -#define D2D_CMD_Q 22 /* DRAM to DRAM DMA Command Queue */ -#define PXL_CMD_Q 23 /* Low Priority Proxy Command Queue */ -#define PXH_CMD_Q 24 /* High Priority Proxy Command Queue */ -#define RSQ_CMD_Q 25 /* Receive Sequencer Command Queue */ -#define RCV_BUF_Q 26 /* Receive Buffer Queue */ +#define H2G_CMD_Q 16 /* Host to GlbRam DMA Command Queue */ +#define H2D_CMD_Q 17 /* Host to DRAM DMA Command Queue */ +#define G2H_CMD_Q 18 /* GlbRam to Host DMA Command Queue */ +#define G2D_CMD_Q 19 /* GlbRam to DRAM DMA Command Queue */ +#define D2H_CMD_Q 20 /* DRAM to Host DMA Command Queue */ +#define D2G_CMD_Q 21 /* DRAM to GlbRam DMA Command Queue */ +#define D2D_CMD_Q 22 /* DRAM to DRAM DMA Command Queue */ +#define PXL_CMD_Q 23 /* Low Priority Proxy Command Queue */ +#define PXH_CMD_Q 24 /* High Priority Proxy Command Queue */ +#define RSQ_CMD_Q 25 /* Receive Sequencer Command Queue */ +#define RCV_BUF_Q 26 /* Receive Buffer Queue */ /* Bit definitions for the Proxy Command queues (PXL_CMD_Q and PXH_CMD_Q) */ -#define PXY_COPY_EN 0x00200000 /* enable copy of xmt descriptor to xmt command queue */ -#define PXY_SIZE_16 0x00000000 /* copy 16 bytes */ -#define PXY_SIZE_32 0x00100000 /* copy 32 bytes */ - -/***************************************************************************** - * SXG EEPROM/Flash Configuration Definitions - *****************************************************************************/ -// Location of configuration data in EEPROM or Flash -#define EEPROM_CONFIG_START_ADDR 0x00 // start addr for config info in EEPROM -#define FLASH_CONFIG_START_ADDR 0x80 // start addr for config info in Flash - -// Configuration data section defines -#define HW_CFG_SECTION_SIZE 512 // size of H/W section -#define HW_CFG_SECTION_SIZE_A 256 // size of H/W section (Sahara rev A) -#define SW_CFG_SECTION_START 512 // starting location (offset) of S/W section -#define SW_CFG_SECTION_START_A 256 // starting location (offset) of S/W section (Sahara rev A) -#define SW_CFG_SECTION_SIZE 128 // size of S/W section - -#define HW_CFG_MAGIC_WORD 0xA5A5 // H/W configuration data magic word -// Goes in Addr field of first HW_CFG_DATA entry -#define HW_CFG_TERMINATOR 0xFFFF // H/W configuration data terminator -// Goes in Addr field of last HW_CFG_DATA entry -#define SW_CFG_MAGIC_WORD 0x5A5A // S/W configuration data magic word +#define PXY_COPY_EN 0x00200000 /* enable copy of xmt descriptor to xmt command queue */ +#define PXY_SIZE_16 0x00000000 /* copy 16 bytes */ +#define PXY_SIZE_32 0x00100000 /* copy 32 bytes */ + +/* SXG EEPROM/Flash Configuration Definitions */ + +/* Location of configuration data in EEPROM or Flash */ +#define EEPROM_CONFIG_START_ADDR 0x00 /* start addr for config info in EEPROM */ +#define FLASH_CONFIG_START_ADDR 0x80 /* start addr for config info in Flash */ + +/* Configuration data section defines */ +#define HW_CFG_SECTION_SIZE 512 /* size of H/W section */ +#define HW_CFG_SECTION_SIZE_A 256 /* size of H/W section (Sahara rev A) */ +#define SW_CFG_SECTION_START 512 /* starting location (offset) of S/W section */ +#define SW_CFG_SECTION_START_A 256 /* starting location (offset) of S/W section (Sahara rev A) */ +#define SW_CFG_SECTION_SIZE 128 /* size of S/W section */ + +#define HW_CFG_MAGIC_WORD 0xA5A5 /* H/W configuration data magic word */ + /* Goes in Addr field of first struct hw_cfg_data entry */ +#define HW_CFG_TERMINATOR 0xFFFF /* H/W configuration data terminator */ + /* Goes in Addr field of last struct hw_cfg_data entry */ +#define SW_CFG_MAGIC_WORD 0x5A5A /* S/W configuration data magic word */ #pragma pack(push, 1) -// Structure for an element of H/W configuration data. -// Read by the Sahara hardware +/* + * Structure for an element of H/W configuration data. + * Read by the Sahara hardware + */ struct hw_cfg_data { ushort Addr; ushort Data; }; -// Number of struct hw_cfg_data structures to put in the configuration data -// data structure (struct sxg_config or struct sxg_config_a). The number is computed -// to fill the entire H/W config section of the structure. +/* + * Number of struct hw_cfg_data structures to put in the configuration data + * data structure (struct sxg_config or struct sxg_config_a). The number is computed + * to fill the entire H/W config section of the structure. + */ #define NUM_HW_CFG_ENTRIES (HW_CFG_SECTION_SIZE / sizeof(struct hw_cfg_data)) #define NUM_HW_CFG_ENTRIES_A (HW_CFG_SECTION_SIZE_A / sizeof(struct hw_cfg_data)) @@ -734,73 +736,69 @@ struct atk_fru { #define EMC_FRU_FORMAT 0x0005 #define NO_FRU_FORMAT 0xFFFF -#define ATK_OEM_ASSY_SIZE 10 // assy num is 9 chars plus \0 +#define ATK_OEM_ASSY_SIZE 10 /* assy num is 9 chars plus \0 */ -// OEM FRU structure for Alacritech +/* OEM FRU structure for Alacritech */ struct atk_oem { unsigned char Assy[ATK_OEM_ASSY_SIZE]; }; -#define OEM_EEPROM_FRUSIZE 74 // size of OEM fru info - size -// chosen to fill out the S/W section +#define OEM_EEPROM_FRUSIZE 74 /* size of OEM fru info - size */ +/* chosen to fill out the S/W section */ -union oem_fru { // OEM FRU information +union oem_fru { /* OEM FRU information */ unsigned char OemFru[OEM_EEPROM_FRUSIZE]; struct atk_oem AtkOem; }; -// Structure to hold the S/W configuration data. +/* Structure to hold the S/W configuration data. */ struct sw_cfg_data { - ushort MagicWord; // Magic word for section 2 - ushort Version; // Format version - struct sxg_config_mac MacAddr[4]; // space for 4 MAC addresses - struct atk_fru AtkFru; // FRU information - ushort OemFruFormat; // OEM FRU format type - union oem_fru OemFru; // OEM FRU information - ushort Checksum; // Checksum of section 2 + ushort MagicWord; /* Magic word for section 2 */ + ushort Version; /* Format version */ + struct sxg_config_mac MacAddr[4]; /* space for 4 MAC addresses */ + struct atk_fru AtkFru; /* FRU information */ + ushort OemFruFormat; /* OEM FRU format type */ + union oem_fru OemFru; /* OEM FRU information */ + ushort Checksum; /* Checksum of section 2 */ }; /* EEPROM/Flash Format */ struct sxg_config { - /* - * H/W Section - Read by Sahara hardware (512 bytes) - */ + /* H/W Section - Read by Sahara hardware (512 bytes) */ struct hw_cfg_data HwCfg[NUM_HW_CFG_ENTRIES]; - /* - * S/W Section - Other configuration data (128 bytes) - */ + /* S/W Section - Other configuration data (128 bytes) */ struct sw_cfg_data SwCfg; }; -// EEPROM/Flash Format (Sahara rev A) +/* EEPROM/Flash Format (Sahara rev A) */ struct sxg_config_a { - /* - * H/W Section - Read by Sahara hardware (256 bytes) - */ + /* H/W Section - Read by Sahara hardware (256 bytes) */ struct hw_cfg_data HwCfg[NUM_HW_CFG_ENTRIES_A]; - /* - * S/W Section - Other configuration data (128 bytes) - */ + /* S/W Section - Other configuration data (128 bytes) */ struct sw_cfg_data SwCfg; }; #ifdef WINDOWS_COMPILER -// The following macro is something of a kludge, but it is the only way -// that I could find to catch certain programming errors at compile time. -// If the asserted condition is true, then nothing happens. If false, then -// the compiler tries to typedef an array with -1 members, which generates -// an error. Unfortunately, the error message is meaningless, but at least -// it catches the problem. This macro would be unnecessary if the compiler -// allowed the sizeof and offsetof macros to be used in the #if directive. +/* + * The following macro is something of a kludge, but it is the only way + * that I could find to catch certain programming errors at compile time. + * If the asserted condition is true, then nothing happens. If false, then + * the compiler tries to typedef an array with -1 members, which generates + * an error. Unfortunately, the error message is meaningless, but at least + * it catches the problem. This macro would be unnecessary if the compiler + * allowed the sizeof and offsetof macros to be used in the #if directive. + */ #define compile_time_assert(cond) \ typedef char comp_error[(cond) ? 1 : -1] -// A compiler error on either of the next two lines indicates that the SXG_CONFIG -// structure was built incorrectly. Unfortunately, the error message produced -// is meaningless. But this is apparently the only way to catch this problem -// at compile time. +/* + * A compiler error on either of the next two lines indicates that the struct sxg_config + * structure was built incorrectly. Unfortunately, the error message produced + * is meaningless. But this is apparently the only way to catch this problem + * at compile time. + */ compile_time_assert (offsetof(struct sxg_config, SwCfg) == SW_CFG_SECTION_START); compile_time_assert (sizeof(struct sxg_config) == HW_CFG_SECTION_SIZE + SW_CFG_SECTION_SIZE); @@ -813,11 +811,11 @@ compile_time_assert (sizeof(struct sxg_config_a) == HW_CFG_SECTION_SIZE_A + SW_C */ struct adapt_userinfo { bool LinkUp; - // u32 LinkState; // use LinkUp - any need for other states? - u32 LinkSpeed; // not currently needed - u32 LinkDuplex; // not currently needed - u32 Port; // not currently needed - u32 PhysPort; // not currently needed + /* u32 LinkState; * use LinkUp - any need for other states? */ + u32 LinkSpeed; /* not currently needed */ + u32 LinkDuplex; /* not currently needed */ + u32 Port; /* not currently needed */ + u32 PhysPort; /* not currently needed */ ushort PciLanes; unsigned char MacAddr[6]; unsigned char CurrMacAddr[6]; @@ -828,24 +826,22 @@ struct adapt_userinfo { #pragma pack(pop) -/***************************************************************************** - * Miscellaneous Hardware definitions - *****************************************************************************/ +/* Miscellaneous Hardware definitions */ -// Type of ASIC in use +/* Type of ASIC in use */ enum ASIC_TYPE{ SAHARA_REV_A, SAHARA_REV_B }; -// Sahara (ASIC level) defines -#define SAHARA_GRAM_SIZE 0x020000 // GRAM size - 128 KB -#define SAHARA_DRAM_SIZE 0x200000 // DRAM size - 2 MB -#define SAHARA_QRAM_SIZE 0x004000 // QRAM size - 16K entries (64 KB) -#define SAHARA_WCS_SIZE 0x002000 // WCS - 8K instructions (x 108 bits) - -// Arabia (board level) defines -#define FLASH_SIZE 0x080000 // 512 KB (4 Mb) -#define EEPROM_SIZE_XFMR 1024 // EEPROM size (bytes), including xfmr area -#define EEPROM_SIZE_NO_XFMR 640 // EEPROM size excluding xfmr area (512 + 128) -#define EEPROM_SIZE_REV_A 512 // EEPROM size for Sahara rev A +/* Sahara (ASIC level) defines */ +#define SAHARA_GRAM_SIZE 0x020000 /* GRAM size - 128 KB */ +#define SAHARA_DRAM_SIZE 0x200000 /* DRAM size - 2 MB */ +#define SAHARA_QRAM_SIZE 0x004000 /* QRAM size - 16K entries (64 KB) */ +#define SAHARA_WCS_SIZE 0x002000 /* WCS - 8K instructions (x 108 bits) */ + +/* Arabia (board level) defines */ +#define FLASH_SIZE 0x080000 /* 512 KB (4 Mb) */ +#define EEPROM_SIZE_XFMR 1024 /* EEPROM size (bytes), including xfmr area */ +#define EEPROM_SIZE_NO_XFMR 640 /* EEPROM size excluding xfmr area (512 + 128) */ +#define EEPROM_SIZE_REV_A 512 /* EEPROM size for Sahara rev A */ diff --git a/drivers/staging/sxg/sxgphycode.h b/drivers/staging/sxg/sxgphycode.h index 0cf762c7aa3c..f7ad38954539 100644 --- a/drivers/staging/sxg/sxgphycode.h +++ b/drivers/staging/sxg/sxgphycode.h @@ -1,23 +1,20 @@ -/* +/******************************************************************** * Copyright (C) 1997-2008 Alacritech, Inc. All rights reserved * * sxgphycode.h: * * This file PHY microcode and register initialization data. - */ + ********************************************************************/ -/********************************************************************** +/* * PHY Microcode * * The following contains both PHY microcode and PHY register * initialization data. It is specific to both the PHY and the * type of transceiver. - * - **********************************************************************/ - -/* - * Download for AEL2005C PHY with SR/LR transceiver (10GBASE-SR or 10GBASE-LR) */ + +/* Download for AEL2005C PHY with SR/LR transceiver (10GBASE-SR or 10GBASE-LR) */ static struct phy_ucode PhyUcode[] = { /* * NOTE: An address of 0 is a special case. When the download routine