From: Mathias Kresin Date: Sat, 3 Sep 2016 05:40:15 +0000 (+0200) Subject: image: pass device blocksize to padjffs2 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ddd259b0d5d0d4ec0084cb7cb30992b63780e962;p=openwrt%2Fstaging%2Flynxis%2Fomap.git image: pass device blocksize to padjffs2 At the moment the padding steps are hardcoded. Especially images for devices with a 4K sector size can be unnecessarily bloated using the hardcoded padding steps. It has been observed that 192Kb of padding was added to the image of a 4MB device, albeit due to the 4K sector size the minimum required extra padding for the jffs2 rootfs_data is 20Kb. In worst case it means that the image-size check could fail albeit there is enough space for all selected packages For device build code not exposing the blocksize, use the hardcoded padding further on. Signed-off-by: Mathias Kresin --- diff --git a/include/image-commands.mk b/include/image-commands.mk index 6cb5bff4ab..9db150c905 100644 --- a/include/image-commands.mk +++ b/include/image-commands.mk @@ -131,7 +131,8 @@ define Build/pad-to endef define Build/pad-rootfs - $(STAGING_DIR_HOST)/bin/padjffs2 $@ $(1) 4 8 16 64 128 256 + $(STAGING_DIR_HOST)/bin/padjffs2 $@ $(1) \ + $(if $(BLOCKSIZE),$(BLOCKSIZE:%k=%),4 8 16 64 128 256) endef define Build/pad-offset