From: Nicolas Thill Date: Thu, 6 Nov 2014 00:05:23 +0000 (+0000) Subject: sunxi: add support for Olimex A20-OLinuXino-LIME X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ddb98cb70f8ed4b1e44fa8680e185fa22c0b753c;p=openwrt%2Fstaging%2Fluka.git sunxi: add support for Olimex A20-OLinuXino-LIME Signed-off-by: Nicolas Thill SVN-Revision: 43189 --- diff --git a/target/linux/sunxi/image/Makefile b/target/linux/sunxi/image/Makefile index e7991cffde..1343470db1 100644 --- a/target/linux/sunxi/image/Makefile +++ b/target/linux/sunxi/image/Makefile @@ -20,6 +20,7 @@ BOARDS:= \ sun7i-a20-bananapi \ sun7i-a20-cubieboard2 \ sun7i-a20-cubietruck \ + sun7i-a20-olinuxino-lime \ sun7i-a20-olinuxino-micro \ sun7i-a20-pcduino3 @@ -69,6 +70,10 @@ define Image/Build/Profile/A13-OLinuXino $(call Image/Build/SDCard,$(1),sun5i-a13-olinuxino) endef +define Image/Build/Profile/A20-OLinuXino_Lime + $(call Image/Build/SDCard,$(1),sun7i-a20-olinuxino-lime) +endef + define Image/Build/Profile/A20-OLinuXino_MICRO $(call Image/Build/SDCard,$(1),sun7i-a20-olinuxino-micro) endef diff --git a/target/linux/sunxi/patches-3.14/310-dt-sun7i-add-a20-olinuxino-lime.patch b/target/linux/sunxi/patches-3.14/310-dt-sun7i-add-a20-olinuxino-lime.patch new file mode 100644 index 0000000000..2406710575 --- /dev/null +++ b/target/linux/sunxi/patches-3.14/310-dt-sun7i-add-a20-olinuxino-lime.patch @@ -0,0 +1,159 @@ +From a71b4438af8242f383906071205db95a8b8e7b6d Mon Sep 17 00:00:00 2001 +From: FUKAUMI Naoki +Date: Wed, 20 Aug 2014 14:25:03 +0900 +Subject: ARM: sun7i: Add support for Olimex A20-OLinuXino-LIME + +This patch adds support for Olimex A20-OLinuXino-LIME board. + +Signed-off-by: FUKAUMI Naoki +Signed-off-by: Maxime Ripard + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -293,6 +293,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \ + sun7i-a20-bananapi.dtb \ + sun7i-a20-cubieboard2.dtb \ + sun7i-a20-cubietruck.dtb \ ++ sun7i-a20-olinuxino-lime.dtb \ + sun7i-a20-olinuxino-micro.dtb \ + sun7i-a20-pcduino3.dtb + dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ +--- /dev/null ++++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +@@ -0,0 +1,136 @@ ++/* ++ * This is based on sun4i-a10-olinuxino-lime.dts ++ * ++ * Copyright 2014 - Hans de Goede ++ * Copyright (c) 2014 FUKAUMI Naoki ++ * ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++/dts-v1/; ++/include/ "sun7i-a20.dtsi" ++/include/ "sunxi-common-regulators.dtsi" ++ ++/ { ++ model = "Olimex A20-OLinuXino-LIME"; ++ compatible = "olimex,a20-olinuxino-lime", "allwinner,sun7i-a20"; ++ ++ soc@01c00000 { ++ mmc0: mmc@01c0f000 { ++ pinctrl-names = "default", "default"; ++ pinctrl-0 = <&mmc0_pins_a>; ++ pinctrl-1 = <&mmc0_cd_pin_reference_design>; ++ cd-gpios = <&pio 7 1 0>; /* PH1 */ ++ cd-mode = <1>; ++ status = "okay"; ++ }; ++ ++ usbphy: phy@01c13400 { ++ usb1_vbus-supply = <®_usb1_vbus>; ++ usb2_vbus-supply = <®_usb2_vbus>; ++ status = "okay"; ++ }; ++ ++ ehci0: usb@01c14000 { ++ status = "okay"; ++ }; ++ ++ ohci0: usb@01c14400 { ++ status = "okay"; ++ }; ++ ++ ahci: sata@01c18000 { ++ target-supply = <®_ahci_5v>; ++ status = "okay"; ++ }; ++ ++ ehci1: usb@01c1c000 { ++ status = "okay"; ++ }; ++ ++ ohci1: usb@01c1c400 { ++ status = "okay"; ++ }; ++ ++ pinctrl@01c20800 { ++ ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { ++ allwinner,pins = "PC3"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ led_pins_olinuxinolime: led_pins@0 { ++ allwinner,pins = "PH2"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <1>; ++ allwinner,pull = <0>; ++ }; ++ }; ++ ++ uart0: serial@01c28000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins_a>; ++ status = "okay"; ++ }; ++ ++ i2c0: i2c@01c2ac00 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins_a>; ++ status = "okay"; ++ ++ axp: axp20x@34 { ++ reg = <0x34>; ++ interrupt-parent = <&nmi_intc>; ++ interrupts = <0 8>; ++ ++ axp,system-power-controller; ++ ++ /include/ "x-powers-axp209.dtsi" ++ }; ++ }; ++ ++ gmac: ethernet@01c50000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&gmac_pins_mii_a>; ++ phy = <&phy1>; ++ phy-mode = "mii"; ++ status = "okay"; ++ ++ phy1: ethernet-phy@1 { ++ reg = <1>; ++ }; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&led_pins_olinuxinolime>; ++ ++ green { ++ label = "a20-olinuxino-lime:green:usr"; ++ gpios = <&pio 7 2 0>; ++ default-state = "on"; ++ }; ++ }; ++ ++ reg_ahci_5v: ahci-5v { ++ pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; ++ gpio = <&pio 2 3 0>; ++ status = "okay"; ++ }; ++ ++ reg_usb1_vbus: usb1-vbus { ++ status = "okay"; ++ }; ++ ++ reg_usb2_vbus: usb2-vbus { ++ status = "okay"; ++ }; ++}; diff --git a/target/linux/sunxi/profiles/a20-olinuxino.mk b/target/linux/sunxi/profiles/a20-olinuxino.mk index 86d1af8f00..89e8050ec5 100644 --- a/target/linux/sunxi/profiles/a20-olinuxino.mk +++ b/target/linux/sunxi/profiles/a20-olinuxino.mk @@ -5,6 +5,19 @@ # See /LICENSE for more information. # +define Profile/A20-OLinuXino_Lime + NAME:=A20 OLinuXino Lime + PACKAGES:=\ + uboot-sunxi-A20-OLinuXino_Lime kmod-ata-sunxi kmod-rtc-sunxi +endef + +define Profile/A20-OLinuXino_Lime/Description + Package set optimized for the Olimex A20 OLinuXino Lime +endef + +$(eval $(call Profile,A20-OLinuXino_Lime)) + + define Profile/A20-OLinuXino_MICRO NAME:=A20 OLinuXino Micro PACKAGES:=\