From: Gabor Juhos <juhosg@openwrt.org>
Date: Fri, 9 Apr 2010 08:40:14 +0000 (+0000)
Subject: ar71xx: update phy masks for the Planex boards
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=dd7304ec6d5dee0901dad760749625cb05953593;p=openwrt%2Fstaging%2Fneocturne.git

ar71xx: update phy masks for the Planex boards

This avoids probing of the AR8216 chip on the eth0 interface.

Cc: backfire@openwrt.org

SVN-Revision: 20754
---

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w04nu.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w04nu.c
index 42d0f81e6a..bc8438f73f 100644
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w04nu.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w04nu.c
@@ -126,13 +126,16 @@ static struct gpio_button mzk_w04nu_gpio_buttons[] __initdata = {
 	}
 };
 
+#define MZK_W04NU_WAN_PHYMASK	BIT(4)
+#define MZK_W04NU_MDIO_MASK	(~MZK_W04NU_WAN_PHYMASK)
+
 static void __init mzk_w04nu_setup(void)
 {
 	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
 
 	ar71xx_set_mac_base(eeprom);
 
-	ar71xx_add_device_mdio(0x0);
+	ar71xx_add_device_mdio(MZK_W04NU_MDIO_MASK);
 
 	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
 	ar71xx_eth0_data.speed = SPEED_100;
@@ -140,7 +143,7 @@ static void __init mzk_w04nu_setup(void)
 	ar71xx_eth0_data.has_ar8216 = 1;
 
 	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-	ar71xx_eth1_data.phy_mask = 0x10;
+	ar71xx_eth1_data.phy_mask = MZK_W04NU_WAN_PHYMASK;
 
 	ar71xx_add_device_eth(0);
 	ar71xx_add_device_eth(1);
diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w300nh.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w300nh.c
index ed431d824c..dfe7d0d6f9 100644
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w300nh.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w300nh.c
@@ -125,13 +125,16 @@ static struct gpio_button mzk_w300nh_gpio_buttons[] __initdata = {
 	}
 };
 
+#define MZK_W300NH_WAN_PHYMASK	BIT(4)
+#define MZK_W300NH_MDIO_MASK	(~MZK_W300NH_WAN_PHYMASK)
+
 static void __init mzk_w300nh_setup(void)
 {
 	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
 
 	ar71xx_set_mac_base(eeprom);
 
-	ar71xx_add_device_mdio(0x0);
+	ar71xx_add_device_mdio(MZK_W300NH_MDIO_MASK);
 
 	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
 	ar71xx_eth0_data.speed = SPEED_100;
@@ -139,7 +142,7 @@ static void __init mzk_w300nh_setup(void)
 	ar71xx_eth0_data.has_ar8216 = 1;
 
 	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-	ar71xx_eth1_data.phy_mask = 0x10;
+	ar71xx_eth1_data.phy_mask = MZK_W300NH_WAN_PHYMASK;
 
 	ar71xx_add_device_eth(0);
 	ar71xx_add_device_eth(1);