From: John Crispin Date: Thu, 4 Apr 2024 20:38:50 +0000 (+0200) Subject: mediatek/filogic: add OpenWrt One support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=dd58ad968a2877ef8a3f2f057e07c7b9683560cd;p=openwrt%2Fstaging%2Fblogic.git mediatek/filogic: add OpenWrt One support Specification: - MT7981 CPU using 2.4GHz and 5GHz WiFi (both AX) - 1GB RAM - 16MB NOR - 128MB NAND - 3 LEDs (red, green, blue, white) - 2 buttons (reset, user defined) - 1 2.5Gbit WAN port (Airoha EN8811h) - 1 1Gbit LAN ports - 1 single lane M.2 SSD slot - 1 mikroBus socket - externel HW WDT (25s refresh time) - i2c RTC (with battery backup) Serial Interface - UBS-C CDC-ACM - 3 Pins GND, RX, TX - Settings: 115200, 8N1 MAC addresses are not populated on the early samples. Signed-off-by: John Crispin --- diff --git a/target/linux/mediatek/dts/mt7981b-openwrt-one.dts b/target/linux/mediatek/dts/mt7981b-openwrt-one.dts new file mode 100644 index 000000000000..b2223f8d765b --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-openwrt-one.dts @@ -0,0 +1,457 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; +#include "mt7981.dtsi" + +/ { + model = "OpenWrt One"; + compatible = "openwrt,one", "mediatek,mt7981"; + + aliases { + ethernet0 = &gmac0; + ethernet1 = &gmac1; + serial0 = &uart0; + led-boot = &led_status_white; + led-failsafe = &led_status_red; + led-running = &led_status_green; + led-upgrade = &led_status_green; + }; + + chosen { + stdout-path = "serial0:115200n8"; + rootdisk = <&ubi_fit_volume>; + }; + + memory { + reg = <0 0x40000000 0 0x40000000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "fixed-5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + + gpio-keys { + compatible = "gpio-keys"; + + user { + label = "user"; + linux,code = ; + gpios = <&pio 0 GPIO_ACTIVE_HIGH>; + }; + + reset { + label = "reset"; + linux,code = ; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + }; + }; + + pwm-leds { + compatible = "pwm-leds"; + + led_status_white: led-0 { + color = ; + function = LED_FUNCTION_STATUS; + pwms = <&pwm 0 10000>; + linux,default-trigger = "pattern"; + led-pattern = <0 500 25 500>; + }; + + led_status_green: led-1 { + color = ; + function = LED_FUNCTION_STATUS; + pwms = <&pwm 1 10000>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led_status_red: led-0 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&pio 9 GPIO_ACTIVE_HIGH>; + }; + + led-1 { + function = LED_FUNCTION_LAN; + color = ; + gpios = <&pio 34 GPIO_ACTIVE_LOW>; + }; + + led-2 { + function = LED_FUNCTION_LAN; + color = ; + gpios = <&pio 35 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-export { + compatible = "gpio-export"; + + gpio-0 { + gpio-export,name = "mikrobus-reset"; + gpio-export,output = <1>; + gpios = <&pio 2 GPIO_ACTIVE_HIGH>; + }; + + gpio-1 { + gpio-export,name = "watchdog-enable"; + gpio-export,output = <1>; + gpios = <&pio 11 GPIO_ACTIVE_HIGH>; + }; + + gpio-2 { + gpio-export,name = "usb-enable"; + gpio-export,output = <1>; + gpios = <&pio 14 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-watchdog { + compatible = "linux,wdt-gpio"; + gpios = <&pio 8 GPIO_ACTIVE_LOW>; + hw_algo = "toggle"; + hw_margin_ms = <25000>; + always-running; + }; +}; + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-handle = <&phy15>; + phy-mode = "2500base-x"; + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_factory_4>; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "gmii"; + phy-handle = <&int_gbe_phy>; + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_factory_a>; + }; +}; + +&mdio_bus { + phy15: phy@f { + reg = <0xf>; + + airoha,pnswap-rx; + + interrupt-parent = <&pio>; + interrupts = <38 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&pio 39 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <20000>; + + phy-mode = "2500base-x"; + full-duplex; + pause; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + function = LED_FUNCTION_WAN; + color = ; + }; + + led@1 { + reg = <1>; + function = LED_FUNCTION_WAN; + color = ; + }; + }; + }; +}; + +&crypto { + status = "okay"; +}; + +&pio { + spi0_flash_pins: spi0-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; + drive-strength = ; + bias-pull-up = ; + }; + + conf-pd { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; + drive-strength = ; + bias-pull-down = ; + }; + }; + + spi1_flash_pins: spi1-pins { + mux { + function = "spi"; + groups = "spi1_1"; + }; + + conf-pu { + pins = "SPI1_CS"; + drive-strength = ; + bias-pull-up = ; + }; + + conf-pd { + pins = "SPI1_CLK", "SPI1_MOSI", "SPI1_MISO"; + drive-strength = ; + bias-pull-down = ; + }; + }; + + spi2_flash_pins: spi2-pins { + mux { + function = "spi"; + groups = "spi2"; + }; + + conf-pu { + pins = "SPI2_CS", "SPI2_WP"; + drive-strength = ; + bias-pull-up = ; + }; + + conf-pd { + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; + drive-strength = ; + bias-pull-down = ; + }; + }; + + i2c_pins: i2c-pins { + mux { + function = "i2c"; + groups = "i2c0_0"; + }; + }; + + uart2_pins: uart2-pins { + mux { + function = "uart"; + groups = "uart2_0_tx_rx"; + }; + }; + + pwm_pins: pwm-pins { + mux { + function = "pwm"; + groups = "pwm0_0", "pwm1_1"; + }; + }; + + pcie_pins: pcie-pins { + mux { + function = "pcie"; + groups = "pcie_pereset"; + }; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins>; + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_flash_pins>; + cs-gpios = <0>, <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <52000000>; + + spi-cal-enable; + spi-cal-mode = "read-data"; + spi-cal-datalen = <7>; + spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4E 0x41 0x4E 0x44>; + spi-cal-addrlen = <5>; + spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@580000 { + label = "ubi"; + reg = <0x100000 0x7F00000>; + compatible = "linux,ubi"; + + volumes { + ubi_fit_volume: ubi-volume-fit { + volname = "fit"; + }; + }; + }; + }; + }; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_flash_pins>; + status = "okay"; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_flash_pins>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + + spi-max-frequency = <52000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2-nor"; + reg = <0x00000 0x40000>; + }; + + partition@40000 { + label = "factory"; + reg = <0x40000 0xc0000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x1000>; + }; + + macaddr_factory_4: macaddr@4 { + compatible = "mac-base"; + reg = <0x24 0x6>; + #nvmem-cell-cells = <1>; + }; + + macaddr_factory_a: macaddr@a { + compatible = "mac-base"; + reg = <0x2a 0x6>; + #nvmem-cell-cells = <1>; + }; + }; + }; + + partition@100000 { + label = "fip-nor"; + reg = <0x100000 0x80000>; + }; + + partition@180000 { + label = "recovery"; + reg = <0x180000 0xc80000>; + }; + }; + }; +}; + +&xhci { + phys = <&u2port0 PHY_TYPE_USB2>; + vusb33-supply = <®_3p3v>; + vbus-supply = <®_5v>; + mediatek,u3p-dis-msk = <0x01>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&wifi { + nvmem-cells = <&eeprom_factory_0>; + nvmem-cell-names = "eeprom"; + status = "okay"; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pins>; + status = "okay"; +}; + +&sgmiisys0 { + /delete-node/ mediatek,pnswap; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds index b5a25546717a..ec239cb0cf06 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds @@ -59,6 +59,12 @@ openembed,som7981) ucidef_set_led_netdev "lanact" "LANACT" "green:lan" "eth1" "rx tx" ucidef_set_led_netdev "lanlink" "LANLINK" "amber:lan" "eth1" "link" ;; +openwrt,one) + ucidef_set_led_netdev "wanact" "WANACT" "mdio-bus:0f:green:wan" "eth0" "rx tx" + ucidef_set_led_netdev "wanlink" "WANLINK" "mdio-bus:0f:amber:wan" "eth0" "link" + ucidef_set_led_netdev "lanact" "LANACT" "green:lan" "eth1" "rx tx" + ucidef_set_led_netdev "lanlink" "LANLINK" "amber:lan" "eth1" "link" + ;; routerich,ax3000) ucidef_set_led_netdev "lan-1" "lan-1" "blue:lan-1" "lan1" "link tx rx" ucidef_set_led_netdev "lan-2" "lan-2" "blue:lan-2" "lan2" "link tx rx" diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index 4de3cf044d14..fc4bc07b2f85 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -59,7 +59,8 @@ mediatek_setup_interfaces() glinet,gl-mt3000|\ glinet,gl-x3000|\ glinet,gl-xe3000|\ - openembed,som7981) + openembed,som7981|\ + openwrt,one) ucidef_set_interfaces_lan_wan eth1 eth0 ;; dlink,aquila-pro-ai-m30-a1) diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata index bd68ef741569..27a16e0fb79e 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata @@ -31,6 +31,9 @@ case "$FIRMWARE" in ;; esac ;; + openwrt,one) + caldata_extract "factory" 0x0 0x1000 + ;; ubnt,unifi-6-plus) caldata_extract_mmc "factory" 0x0 0x1000 ;; diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh index e7b347dc5f98..9b46111d33b2 100755 --- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh +++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh @@ -86,6 +86,7 @@ platform_do_upgrade() { bananapi,bpi-r4-poe|\ mediatek,mt7988a-rfb|\ jdcloud,re-cp-03|\ + openwrt,one|\ tplink,tl-xdr4288|\ tplink,tl-xdr6086|\ tplink,tl-xdr6088|\ diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index 5c2f67eb992a..e85d67f2ae7c 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -951,6 +951,54 @@ define Device/openembed_som7981 endef TARGET_DEVICES += openembed_som7981 +define Build/append-openwrt-one-eeprom + dd if=$(STAGING_DIR_IMAGE)/mt7981_eeprom_mt7976_dbdc.bin >> $@ +endef + +define Device/openwrt_one + DEVICE_VENDOR := OpenWrt + DEVICE_MODEL := One + DEVICE_DTS := mt7981b-openwrt-one + DEVICE_DTS_DIR := ../dts + DEVICE_DTC_FLAGS := --pad 4096 + DEVICE_DTS_LOADADDR := 0x43f00000 + DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware kmod-rtc-pcf8563 kmod-usb3 kmod-nvme kmod-phy-airoha-en8811h + KERNEL_LOADADDR := 0x44000000 + KERNEL := kernel-bin | gzip + KERNEL_INITRAMFS := kernel-bin | lzma | \ + fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k + KERNEL_INITRAMFS_SUFFIX := .itb + KERNEL_IN_UBI := 1 + UBOOTENV_IN_UBI := 1 + IMAGES := sysupgrade.itb + IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m + IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata + ARTIFACTS := \ + nor-preloader.bin nor-bl31-uboot.fip \ + snand-preloader.bin snand-bl31-uboot.fip \ + factory.ubi snand-factory.bin nor-factory.bin + ARTIFACT/nor-preloader.bin := mt7981-bl2 nor-ddr4 + ARTIFACT/nor-bl31-uboot.fip := mt7981-bl31-uboot openwrt_one-nor + ARTIFACT/snand-preloader.bin := mt7981-bl2 spim-nand-ubi-ddr4 + ARTIFACT/snand-bl31-uboot.fip := mt7981-bl31-uboot openwrt_one-snand + ARTIFACT/factory.ubi := ubinize-image fit squashfs-sysupgrade.itb + ARTIFACT/snand-factory.bin := mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 256k | \ + mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 512k | \ + mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 768k | \ + mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 1024k | \ + ubinize-image fit squashfs-sysupgrade.itb + ARTIFACT/nor-factory.bin := mt7981-bl2 nor-ddr4 | pad-to 256k | \ + append-openwrt-one-eeprom | pad-to 1024k | \ + mt7981-bl31-uboot openwrt_one-nor | pad-to 512k | \ + append-image-stage initramfs.itb + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 128k + PAGESIZE := 2048 + UBINIZE_PARTS := fip=:$(STAGING_DIR_IMAGE)/mt7981_openwrt_one-snand-u-boot.fip recovery=:$(KDIR)/tmp/openwrt-mediatek-filogic-openwrt_one-initramfs.itb \ + $(if $(wildcard $(TOPDIR)/openwrt-mediatek-filogic-openwrt_one-calibration.itb), calibration=:$(TOPDIR)/openwrt-mediatek-filogic-openwrt_one-calibration.itb) +endef +TARGET_DEVICES += openwrt_one + define Device/qihoo_360t7 DEVICE_VENDOR := Qihoo DEVICE_MODEL := 360T7