From: Florian Fainelli Date: Wed, 17 Dec 2008 13:35:14 +0000 (+0000) Subject: Move flashing scripts to scripts/flashing/ X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=dd4eef046824d9f7f14560231e4a0eb8ea42f1f1;p=openwrt%2Fstaging%2Frobimarko.git Move flashing scripts to scripts/flashing/ SVN-Revision: 13674 --- diff --git a/scripts/adam2flash-502T.pl b/scripts/adam2flash-502T.pl deleted file mode 100644 index 0ed296d60f..0000000000 --- a/scripts/adam2flash-502T.pl +++ /dev/null @@ -1,340 +0,0 @@ -#!/usr/bin/env perl -# -# D-Link DSL-502T flash utility -# -# Copyright (c) 2007 Oliver Jowett -# -# Based on adam2flash.pl for the D-Link DSL-G6x4T, which is: -# Copyright (C) 2005 Felix Fietkau -# based on fbox recovery util by Enrik Berkhan -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -# - -# The default DSL-502T mtd map looks like this: -# -# mtd0 0x90091000,0x903f0000 # filesystem -# mtd1 0x90010090,0x90091000 # kernel -# mtd2 0x90000000,0x90010000 # bootloader - DO NOT MODIFY -# mtd3 0x903f0000,0x90400000 # config space - DO NOT MODIFY -# mtd4 0x90010000,0x903f0000 # firmware signature + kernel + filesystem, used to flash new firmware -# -# i.e. the flash layout is: -# -# 90000000-9000FFFF mtd2 bootloader -# 90010000-9001008F ---- firmware signature ) -# 90010090-90090FFF mtd1 kernel ) mtd4 spans these three regions -# 90091000-903EFFFF mtd0 filesystem ) -# 903F0000-903FFFFF mtd3 config space -# -# The ADAM2 bootloader uses the mtd1 settings to find the start of the image to boot. -# The image to load contains information about the loadable size of the image. If ADAM2 sees -# that the image appears to extend beyond the end of mtd1, it will refuse to load it. On -# the DSL-502T, this manifests as the USB light blinking rapidly on boot. -# -# The OpenWRT kernel does not follow quite the same layout: -# (a) it does not have a 0x90-byte firmware signature prefix -# (b) it is larger than the default mtd1 size -# -# (a) would be avoidable (build a custom image with a 0x90-byte prefix) but (b) is unavoidable. -# So we *have* to change mtd1. The simplest thing to do seems to make it span all of -# the flashable area, producing this layout: -# -# mtd0 0x90091000,0x903f0000 # filesystem -# mtd1 0x90010000,0x903f0000 # kernel (CHANGED) -# mtd2 0x90000000,0x90010000 # bootloader - DO NOT MODIFY -# mtd3 0x903f0000,0x90400000 # config space - DO NOT MODIFY -# mtd4 0x90010000,0x903f0000 # kernel + filesystem, used to flash new firmware -# -# *** NOTE NOTE NOTE NOTE *** -# -# /dev/mtd0 .. /dev/mtd4 when using OpenWRT do **NOT** correspond to the ADAM2 mtd0-4 settings! -# Instead, OpenWRT scans the MTD itself and determines its own boundaries which are arranged -# quite differently to ADAM2. It will look something like this, see dmsg on boot: -# -# (/dev/mtd0) 0x00000000-0x00010000 : "loader" # Bootloader, read-only -# (/dev/mtd1) 0x003f0000-0x00400000 : "config" # Config space -# (/dev/mtd2) 0x00010000-0x003f0000 : "linux" # Firmware area (kernel + root fs + JFFS area) -# (/dev/mtd3) 0x000d0d58-0x003f0000 : "rootfs" # Root FS, starts immediately after kernel -# (/dev/mtd4) 0x00280000-0x003f0000 : "rootfs_data" # If rootfs is squashfs, start of JFFS area. -# -# All of those boundaries are autodetected by examining the data in flash. -# -# *** NOTE NOTE NOTE NOTE *** - -use IO::Socket::INET; -use Socket; -use strict; -use warnings; - -sub usage() { - print STDERR "Usage: $0 [-setmtd1] [-noflash] [firmware.bin]\n\n"; - print STDERR "Acquires the ADAM2 bootloader of a D-Link DSL-504T at \n"; - print STDERR "Power off the device, start this script, then power it on.\n"; - print STDERR " may be any spare address on the local subnet.\n\n"; - print STDERR "If a firmware file is specified, MTD settings are verified and\n"; - print STDERR "then the firmware is written to the router's flash.\n"; - print STDERR "The firmware type (D-Link or OpenWRT) is automatically detected.\n\n"; - print STDERR " -setmtd1 update mtd1 if it is not the appropriate value for this firmware\n"; - print STDERR " -noflash does normal checks, updates mtd1 if requested, but does not actually write firmware\n\n"; - exit 0; -} - -my $ip = shift @ARGV; -$ip and $ip =~ /\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}/ or usage(); - -my $probe = IO::Socket::INET->new(Proto => 'udp', - Broadcast => 1, - LocalPort => 5035) or die "socket: $!"; -my $setip = unpack("N", inet_aton($ip)); -$setip > 0 or usage(); - -my @packets; -foreach my $ver ([18, 1], [22, 2]) { - push @packets, pack("vCCVNV", 0, @$ver, 1, $setip, 0); -} -print STDERR "Looking for device: "; -my $broadcast = sockaddr_in(5035, INADDR_BROADCAST); -my $scanning; -my $box; - -$SIG{"ALRM"} = sub { - return if --$scanning <= 0; - foreach my $packet (@packets) { - $probe->send($packet, 0, $broadcast); - } - print STDERR "."; -}; - -$scanning = 15; -foreach my $packet (@packets) { - $probe->send($packet, 0, $broadcast); -} -print STDERR "."; - -while($scanning) { - my $reply; - - alarm(1); - if (my $peer = $probe->recv($reply, 16)) { - next if (length($reply) < 16); - my ($port, $addr) = sockaddr_in($peer); - my ($major, $minor1, $minor2, $code, $addr2) = unpack("vCCVV", $reply); - $addr2 = pack("N", $addr2); - if ($code == 2) { - $scanning = 0; - printf STDERR " found!\nADAM2 version $major.$minor1.$minor2 at %s (%s)\n", inet_ntoa($addr), inet_ntoa($addr2); - $box = inet_ntoa($addr); - } - } -} - -$box or die " not found!\n"; - -{ - package ADAM2FTP; - use base qw(Net::FTP); - - # ADAM2 requires upper case commands, some brain dead firewall doesn't ;-) - sub _USER { - shift->command("USER",@_)->response() - } - - sub _GETENV { - my $ftp = shift; - my ($ok, $name, $value); - - $ftp->command("GETENV",@_); - while(length($ok = $ftp->response()) < 1) { - my $line = $ftp->getline(); - unless (defined($value)) { - chomp($line); - ($name, $value) = split(/\s+/, $line, 2); - } - } - $ftp->debug_print(0, "getenv: $value\n") - if $ftp->debug(); - return $value; - } - - sub getenv { - my $ftp = shift; - my $name = shift; - return $ftp->_GETENV($name); - } - - sub _REBOOT { - shift->command("REBOOT")->response() == Net::FTP::CMD_OK - } - - sub reboot { - my $ftp = shift; - $ftp->_REBOOT; - $ftp->close; - } -} - -my $file; -my $arg; -my $noflash = 0; -my $setmtd1 = 0; -while ($arg = shift @ARGV) { - if ($arg eq "-noflash") { $noflash = 1; } - elsif ($arg eq "-setmtd1") { $setmtd1 = 1; } - else { $file = $arg; } -} - -if (!$file) { - print STDERR "No firmware file specified, exiting.\n"; - exit 0; -} - -# -# Firmware checks -# - -open FILE, "<$file" or die "can't open firmware file\n"; - -# D-Link firmware starts with "MTD4" little-endian, then has an image header at 0x90 -# OpenWRT firmware just starts with an image header at 0x00 - -my $signature; -my $sbytes = read FILE, $signature, 4; -($sbytes == 4) or die "can't read firmware signature: $!"; - -my $expectedmtd4 = "0x90010000,0x903f0000"; -my $fwtype; -my $expectedmtd1; - -if ($signature eq "4DTM") { - seek FILE, 0x90, 0 or die "can't read firmware signature: $!"; - $sbytes = read FILE, $signature, 4; - ($sbytes == 4) or die "can't read firmware signature: $!"; - if ($signature eq "\x42\xfa\xed\xfe") { - $fwtype = "D-Link (little-endian)"; - $expectedmtd1 = "0x90010090,0x90091000"; - } elsif ($signature eq "\xde\xad\xbe\x42") { - $fwtype = "D-Link (big-endian)"; - $expectedmtd1 = "0x90010090,0x90091000"; - } -} elsif ($signature eq "\x42\xfa\xed\xfe") { - $fwtype = "OpenWRT (little-endian)"; - $expectedmtd1 = "0x90010000,0x903f0000"; -} elsif ($signature eq "\xde\xad\xbe\x42") { - $fwtype = "OpenWRT (big-endian)"; - $expectedmtd1 = "0x90010000,0x903f0000"; -} - -$fwtype or die "Unknown firmware signature (are you sure that's the right firmware?)"; -print STDERR "Firmware type: $fwtype\n"; - -# -# Bootloader login -# - -print STDERR "logging into ADAM2 bootloader.. "; -my $ftp = ADAM2FTP->new($box, Debug => 0, Timeout => 600) or die "can't open control connection\n"; -$ftp->login("adam2", "adam2") or die "can't login\n"; -print STDERR "ok.\n"; - -# -# Hardware checks -# - -print STDERR "checking hardware.. "; -my $prd = $ftp->getenv("ProductID"); -my $usb = $ftp->getenv("usb_prod"); -print STDERR "$prd / $usb.\n"; -($prd eq "AR7RD" || $prd eq "AR7DB") or die "doesn't look like a DSL-502T?"; -($usb eq "DSL-502T") or die "doesn't look like a DSL-502T?"; - -# -# MTD checks and update -# - -print STDERR "checking MTD settings.. "; - -my $mtd4 = $ftp->getenv("mtd4"); -($mtd4 eq $expectedmtd4) or die "MTD4 was not as expected (should be '$expectedmtd4', was '$mtd4'). Cowardly refusing to do anything about it!"; - -# check MTD1 setting and update if needed -my $mtd1 = $ftp->getenv("mtd1"); -if ($mtd1 ne $expectedmtd1) { - die "MTD1 was not as expected (should be '$expectedmtd1', was '$mtd1'). Run with -setmtd1 to reset mtd1" unless ($setmtd1); - print STDERR "Setting mtd1.. "; - ($ftp->command("SETENV","mtd1,$expectedmtd1")->response() == Net::FTP::CMD_OK) or die "can't set mtd1"; - $file = shift @ARGV; -} - -print STDERR "ok.\n"; - -# -# Firmware size check -# - -my $fwsize = (stat(FILE))[7]; -printf STDERR "Firmware size: 0x%08x\n", $fwsize; -my $flashsize; -$mtd4 =~ /^(0x\w+),(0x\w+)$/ and $flashsize = hex($2) - hex($1); -printf STDERR "Available flash space: 0x%08x\n", $flashsize; -die "firmware is too large" if ($flashsize < $fwsize); - -# -# Flash it! -# - -if ($noflash) { - print STDERR "Not flashing firmware as -noflash was specified.\n"; - exit 0; -} - -seek FILE, 0, 0, or die "can't seek in firmware: $!"; - -print STDERR "Preparing to flash.. "; -($ftp->command("MEDIA FLSH")->response() == Net::FTP::CMD_OK) or die "can't set MEDIA FLSH"; -$ftp->binary() or die "can't set binary mode"; -print STDERR "ok.\n"; -print STDERR "Erasing flash and establishing data connection (this may take a while): "; - -my $dc = $ftp->stor("fs mtd4"); -$dc or die "can't open data connection: $!\n"; -print STDERR "ok.\n"; - -print STDERR "Writing firmware: "; -while ($fwsize > 0) { - my $buffer; - my $len = ($fwsize > 1024 ? 1024 : $fwsize); - - my $rbytes = read FILE, $buffer, $len; - ($rbytes < 0) and die "read error on firmware file: $!"; - ($rbytes == $len) or die "short read on firmware file ($rbytes < $len)"; - - my $wbytes = $dc->write($buffer, $len, 600); - ($wbytes < 0) and die "write error on FTP data connection: $!"; - ($rbytes == $wbytes) or die "short write on FTP data connection ($wbytes < $rbytes)"; - - $fwsize -= $len; - print STDERR "."; -} - -$dc->close(); -print STDERR " done.\n"; - -# -# Reboot -# - -print STDERR "Rebooting device.\n"; -$ftp->reboot(); diff --git a/scripts/adam2flash-fritzbox.pl b/scripts/adam2flash-fritzbox.pl deleted file mode 100644 index f8d745f678..0000000000 --- a/scripts/adam2flash-fritzbox.pl +++ /dev/null @@ -1,209 +0,0 @@ -#!/usr/bin/env perl -# -# D-Link DSL-G6x4T flash utility -# -# Copyright (C) 2005 Felix Fietkau -# based on fbox recovery util by Enrik Berkhan -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -# - -use IO::Socket::INET; -use IO::Select; -use Socket; -use strict; -use warnings; - -sub usage() { - print STDERR "Usage: $0 [firmware.bin]\n\n"; - exit 0; -} - -my $ip = shift @ARGV; -$ip and $ip =~ /\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}/ or usage(); - -my $setip = unpack("N", inet_aton($ip)); -$setip > 0 or usage(); - -my @packets; -foreach my $ver ([18, 1], [22, 2]) { - push @packets, pack("vCCVNV", 0, @$ver, 1, $setip, 0); -} -print STDERR "Looking for device: "; -my $scanning; -my $box; - -my $probe = IO::Socket::INET->new(Proto => 'udp', - Broadcast => 1, - LocalAddr => $ip, - LocalPort => 5035) or die "socket: $!"; -my $sel = IO::Select->new($probe); -my $packet = pack("vCCVNV", 0, 18, 1, 1, 0, 0); -my $broadcast = sockaddr_in(5035, INADDR_BROADCAST); - -$probe->send($packet, 0, $broadcast); - - -scan_again: -print "Looking for Fritz!Box "; -my @boxes = (); -my $peer; -$scanning = 100; -print "o"; -while($scanning) { - my $reply; - my @ready; - - if (@ready = $sel->can_read(0.2)) { - $peer = $probe->recv($reply, 16); - next if (length($reply) < 16); - my ($port, $addr) = sockaddr_in($peer); - my ($major, $minor1, $minor2, $code, $addr2) = unpack("vCCVV", $reply); - $addr2 = pack("N", $addr2); - if ($code == 2) { - print "O"; - push @boxes, [$major, $minor1, $minor2, $addr, $addr2]; - $scanning = 2 if ($scanning > 2); - } - } else { - $scanning--; - if (scalar @boxes == 0) { - $probe->send($packet, 0, $broadcast); - print "o"; - } else { - print "."; - } - } -} - -if (scalar @boxes == 0) { - print " none found, giving up.\n"; - exit 1; -} else { - print " found!\n"; -} - -{ - package ADAM2FTP; - use base qw(Net::FTP); - # ADAM2 requires upper case commands, some brain dead firewall doesn't ;-) - sub _USER { shift->command("USER",@_)->response() } - sub _PASV { shift->command("P\@SW")->response() == Net::FTP::CMD_OK } - sub _GETENV { - my $ftp = shift; - my ($ok, $name, $value); - - $ftp->command("GETENV",@_); - while(length($ok = $ftp->response()) < 1) { - my $line = $ftp->getline(); - unless (defined($value)) { - chomp($line); - ($name, $value) = split(/\s+/, $line, 2); - } - } - $ftp->debug_print(0, "getenv: $value\n") - if $ftp->debug(); - return $value; - } - sub getenv { - my $ftp = shift; - my $name = shift; - return $ftp->_GETENV($name); - } - sub _REBOOT { shift->command("REBOOT")->response() == Net::FTP::CMD_OK } - sub reboot { - my $ftp = shift; - $ftp->_REBOOT; - $ftp->close; - } - sub check { - my $ftp = shift; - - delete ${*$ftp}{'net_ftp_port'}; - delete ${*$ftp}{'net_ftp_pasv'}; - - my $data = $ftp->_data_cmd('CHECK' ,@_) or return undef; - my $sum; - if (${${*$ftp}{'net_cmd_resp'}}[0] =~ /^Flash check 0x([0-9A-F]{8})/) { - $sum = hex($1); - } - $data->_close(); - return $sum; - } -} - -# passive mode geht mit Net::FTP nicht, connected zu spaet fuer ADAM2! -my $ftp = ADAM2FTP->new($ip, Passive => 0, Debug => 0, Timeout => 600) - or die "can't FTP ADAM2"; -$ftp->login("adam2", "adam2") or die "can't login adam2"; -$ftp->binary(); -my $pid = $ftp->getenv('ProductID'); -my $hwrev = $ftp->getenv('HWRevision'); -my $fwrev = $ftp->getenv('firmware_info'); -my $ulrev = $ftp->getenv('urlader-version'); - -print "Product ID: $pid\n"; -print "Hardware Revision: $hwrev\n"; -print "Urlader Revision: $ulrev\n"; -print "Firmware Revision: $fwrev\n"; - -$ftp->hash(\*STDOUT, 64 * 1024); - -my $file = shift @ARGV; -$file || exit 0; - -open FILE, "<$file" or die "can't open firmware file\n"; - -my $mtd0 = $ftp->getenv("mtd0"); -my $mtd1 = $ftp->getenv("mtd1"); -my ($ksize, $fssize); - -$mtd1 =~ /^(0x\w+),(0x\w+)$/ and $ksize = hex($2) - hex($1); -$mtd0 =~ /^(0x\w+),(0x\w+)$/ and $fssize = hex($2) - hex($1); -$ksize and $fssize or die 'cannot read partition offsets'; -printf STDERR "Available flash space: 0x%08x (0x%08x + 0x%08x)\n", $ksize + $fssize, $ksize, $fssize; - -$ftp->command("MEDIA FLSH")->response(); -$ftp->binary(); -print STDERR "Writing to mtd1...\n"; - -my $dc = $ftp->stor("fs mtd1"); -$dc or die "can't open data connection\n"; -my $rbytes = 1; - -while (($ksize > 0) and ($rbytes > 0)) { - my $buffer; - my $len = ($ksize > 1024 ? 1024 : $ksize); - $rbytes = read FILE, $buffer, $len; - $rbytes and $ksize -= $dc->write($buffer, $rbytes, 600); -} - -$dc->close(); -$rbytes or die "no more data left to write\n"; - -print STDERR "Writing to mtd0...\n"; - -$dc = $ftp->stor("fs mtd0"); -$dc or die "can't open data connection\n"; - -while (($fssize > 0) and ($rbytes > 0)) { - my $buffer; - my $len = ($fssize > 1024 ? 1024 : $fssize); - $rbytes = read FILE, $buffer, $len; - $rbytes and $fssize -= $dc->write($buffer, $rbytes, 600); -} - -$dc->close(); -$ftp->reboot(); diff --git a/scripts/adam2flash.pl b/scripts/adam2flash.pl deleted file mode 100755 index 8550f80a8a..0000000000 --- a/scripts/adam2flash.pl +++ /dev/null @@ -1,174 +0,0 @@ -#!/usr/bin/env perl -# -# D-Link DSL-G6x4T flash utility -# -# Copyright (C) 2005 Felix Fietkau -# based on fbox recovery util by Enrik Berkhan -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -# - -use IO::Socket::INET; -use Socket; -use strict; -use warnings; - -sub usage() { - print STDERR "Usage: $0 [firmware.bin]\n\n"; - exit 0; -} - -my $ip = shift @ARGV; -$ip and $ip =~ /\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}/ or usage(); - -my $probe = IO::Socket::INET->new(Proto => 'udp', - Broadcast => 1, - LocalPort => 5035) or die "socket: $!"; -my $setip = unpack("N", inet_aton($ip)); -$setip > 0 or usage(); - -my @packets; -foreach my $ver ([18, 1], [22, 2]) { - push @packets, pack("vCCVNV", 0, @$ver, 1, $setip, 0); -} -print STDERR "Looking for device: "; -my $broadcast = sockaddr_in(5035, INADDR_BROADCAST); -my $scanning; -my $box; - -$SIG{"ALRM"} = sub { - return if --$scanning <= 0; - foreach my $packet (@packets) { - $probe->send($packet, 0, $broadcast); - } - print STDERR "."; -}; - -$scanning = 10; -foreach my $packet (@packets) { - $probe->send($packet, 0, $broadcast); -} -print STDERR "."; - -while($scanning) { - my $reply; - - alarm(1); - if (my $peer = $probe->recv($reply, 16)) { - next if (length($reply) < 16); - my ($port, $addr) = sockaddr_in($peer); - my ($major, $minor1, $minor2, $code, $addr2) = unpack("vCCVV", $reply); - $addr2 = pack("N", $addr2); - if ($code == 2) { - $scanning = 0; - printf STDERR " found!\nADAM2 version $major.$minor1.$minor2 at %s (%s)\n", inet_ntoa($addr), inet_ntoa($addr2); - $box = inet_ntoa($addr); - } - } -} - -$box or die " not found!\n"; - -{ - package ADAM2FTP; - use base qw(Net::FTP); - - # ADAM2 requires upper case commands, some brain dead firewall doesn't ;-) - sub _USER { - shift->command("USER",@_)->response() - } - - sub _GETENV { - my $ftp = shift; - my ($ok, $name, $value); - - $ftp->command("GETENV",@_); - while(length($ok = $ftp->response()) < 1) { - my $line = $ftp->getline(); - unless (defined($value)) { - chomp($line); - ($name, $value) = split(/\s+/, $line, 2); - } - } - $ftp->debug_print(0, "getenv: $value\n") - if $ftp->debug(); - return $value; - } - - sub getenv { - my $ftp = shift; - my $name = shift; - return $ftp->_GETENV($name); - } - - sub _REBOOT { - shift->command("REBOOT")->response() == Net::FTP::CMD_OK - } - - sub reboot { - my $ftp = shift; - $ftp->_REBOOT; - $ftp->close; - } -} - -my $file = shift @ARGV; -$file || exit 0; - -open FILE, "<$file" or die "can't open firmware file\n"; -my $ftp = ADAM2FTP->new($box, Debug => 0, Timeout => 600) or die "can't open control connection\n"; -$ftp->login("adam2", "adam2") or die "can't login\n"; - -my $mtd0 = $ftp->getenv("mtd0"); -my $mtd1 = $ftp->getenv("mtd1"); -my ($ksize, $fssize); - -$mtd1 =~ /^(0x\w+),(0x\w+)$/ and $ksize = hex($2) - hex($1); -$mtd0 =~ /^(0x\w+),(0x\w+)$/ and $fssize = hex($2) - hex($1); -$ksize and $fssize or die 'cannot read partition offsets'; -printf STDERR "Available flash space: 0x%08x (0x%08x + 0x%08x)\n", $ksize + $fssize, $ksize, $fssize; - -$ftp->command("MEDIA FLSH")->response(); -$ftp->binary(); -print STDERR "Writing to mtd1...\n"; - -my $dc = $ftp->stor("fs mtd1"); -$dc or die "can't open data connection\n"; -my $rbytes = 1; - -while (($ksize > 0) and ($rbytes > 0)) { - my $buffer; - my $len = ($ksize > 1024 ? 1024 : $ksize); - $rbytes = read FILE, $buffer, $len; - $rbytes and $ksize -= $dc->write($buffer, $rbytes, 600); -} - -$dc->close(); -$rbytes or die "no more data left to write\n"; - -print STDERR "Writing to mtd0...\n"; - -$dc = $ftp->stor("fs mtd0"); -$dc or die "can't open data connection\n"; - -while (($fssize > 0) and ($rbytes > 0)) { - my $buffer; - my $len = ($fssize > 1024 ? 1024 : $fssize); - $rbytes = read FILE, $buffer, $len; - $rbytes and $fssize -= $dc->write($buffer, $rbytes, 600); -} - -$dc->close(); -$ftp->reboot(); diff --git a/scripts/adsl2mue_flash.pl b/scripts/adsl2mue_flash.pl deleted file mode 100644 index c206c471fd..0000000000 --- a/scripts/adsl2mue_flash.pl +++ /dev/null @@ -1,170 +0,0 @@ -#!/usr/bin/perl -# -# Linksys ADSL2MUE Flash utility. -# -# Copyright (C) 2008 Alexandre Lissy -# based on D-Link DSL-G6x4T flash utility by Felix Fietkau -# based on fbox recovery util by Enrik Berkhan -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -# - -use IO::Socket::INET; -use Socket; -use strict; -use warnings; - -sub usage() { - print STDERR "Usage: $0 [firmware.bin] [partition]\n\n"; - exit 0; -} - -my $ip = shift @ARGV; -$ip and $ip =~ /\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}/ or usage(); - -my $probe = IO::Socket::INET->new(Proto => 'udp', - Broadcast => 1, - LocalPort => 5035) or die "socket: $!"; -my $setip = unpack("N", inet_aton($ip)); -$setip > 0 or usage(); - -my @packets; -foreach my $ver ([18, 1], [22, 2]) { - push @packets, pack("vCCVNV", 0, @$ver, 1, $setip, 0); -} -print STDERR "Looking for device: "; -my $broadcast = sockaddr_in(5035, INADDR_BROADCAST); -my $scanning; -my $box; - -$SIG{"ALRM"} = sub { - return if --$scanning <= 0; - foreach my $packet (@packets) { - $probe->send($packet, 0, $broadcast); - } - print STDERR "."; -}; - -$scanning = 10; -foreach my $packet (@packets) { - $probe->send($packet, 0, $broadcast); -} -print STDERR "."; - -while($scanning) { - my $reply; - - alarm(1); - if (my $peer = $probe->recv($reply, 16)) { - next if (length($reply) < 16); - my ($port, $addr) = sockaddr_in($peer); - my ($major, $minor1, $minor2, $code, $addr2) = unpack("vCCVN", $reply); - $addr2 = pack("N", $addr2); - if ($code == 1) { - $scanning = 0; - printf STDERR " found!\nADAM2 version $major.$minor1.$minor2 at %s (%s)\n", inet_ntoa($addr2), inet_ntoa($addr); - $box = inet_ntoa($addr2); - } - } -} - -$box or die " not found!\n"; - -{ - package ADAM2FTP; - use base qw(Net::FTP); - - # ADAM2 requires upper case commands, some brain dead firewall doesn't ;-) - sub _USER { - shift->command("USER",@_)->response() - } - - sub _GETENV { - my $ftp = shift; - my ($ok, $name, $value); - - $ftp->command("GETENV",@_); - while(length($ok = $ftp->response()) < 1) { - my $line = $ftp->getline(); - unless (defined($value)) { - chomp($line); - ($name, $value) = split(/\s+/, $line, 2); - } - } - $ftp->debug_print(0, "getenv: $value\n") - if $ftp->debug(); - return $value; - } - - sub getenv { - my $ftp = shift; - my $name = shift; - return $ftp->_GETENV($name); - } - - sub _REBOOT { - shift->command("REBOOT")->response() == Net::FTP::CMD_OK - } - - sub reboot { - my $ftp = shift; - $ftp->_REBOOT; - $ftp->close; - } -} - -my $file = shift @ARGV; -my $part = shift @ARGV; -$file || exit 0; -$part || exit 0; - -open FILE, "<$file" or die "can't open firmware file\n"; -my $ftp = ADAM2FTP->new($box, Debug => 0, Timeout => 600) or die "can't open control connection\n"; -$ftp->login("adam2", "adam2") or die "can't login\n"; - -# my $mtd0 = $ftp->getenv("mtd0"); -# my $mtd1 = $ftp->getenv("mtd1"); -my $mtd4 = $ftp->getenv($part); -# my ($ksize, $fssize); -my ($ossize, $mtd_start, $mtd_end); - -# $mtd1 =~ /^(0x\w+),(0x\w+)$/ and $ksize = hex($2) - hex($1); -# $mtd0 =~ /^(0x\w+),(0x\w+)$/ and $fssize = hex($2) - hex($1); -$mtd4 =~ /^(0x\w+),(0x\w+)$/; -$ossize = hex($2) - hex($1); -$mtd_start = hex($1); -$mtd_end = hex($2); -$ossize and $mtd_start and $mtd_end or die 'cannot read partition offsets'; -printf STDERR "Available flash space: 0x%08x ($part: 0x%08x to 0x%08x)\n", $ossize, $mtd_start, $mtd_end; - -$ftp->command("MEDIA FLSH")->response(); -$ftp->binary(); - -print STDERR "Writing to $part ...\n"; -my $dc = $ftp->stor("data $part"); -$dc or die "can't open data connection\n"; -my $rbytes = 1; - -while (($ossize > 0) and ($rbytes > 0)) { - my $buffer; - my $len = ($ossize > 1024 ? 1024 : $ossize); - $rbytes = read FILE, $buffer, $len; - printf STDERR "."; - $rbytes and $ossize -= $dc->write($buffer, $rbytes, 600); -} - -printf STDERR "\nDone.\n"; - -$dc->close(); diff --git a/scripts/flash.sh b/scripts/flash.sh deleted file mode 100755 index 8841c35684..0000000000 --- a/scripts/flash.sh +++ /dev/null @@ -1,66 +0,0 @@ -#!/bin/bash -# -# tftp flash script for wireless routers -# -# Copyright (C) 2004 by Oleg I. Vdovikin -# Copyright (C) 2005 by Waldemar Brodkorb -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -# - -if [ -z "$1" ] || [ ! -f $1 ] || [ -z $2 ]; then - echo Usage: $0 firmware vendor -cat << EOF -IMPORTANT: -Notes for Linksys / Asus WL500gx router: - be sure you have set boot_wait to yes. Power on your router - after executing this script. - -Notes for Asus WL500g router: - be sure POWER led is flashing (If this is not the case - poweroff the device, push the reset button & power on - it again, then release button) - -1) connect your pc to the LAN port -2) be sure your link is up and has an address in the - 192.168.1.0/24 address range (and not the 192.168.1.1) - -Notes for Toshiba router: - boot_wait is enabled by default on these units. - -1) connect your pc to any of the four LAN ports -2) be sure your link is up and has an address in the - 192.168.10.1/24 address range (and not the 192.168.10.1) -3) run this script (unit will only accept .trx images) -4) Turn unit power on. - -EOF - exit 0 -fi -if [ "$2" == "asus" ]; then -echo Confirming IP address setting... -echo -en "get ASUSSPACELINK\x01\x01\xa8\xc0 /dev/null\nquit\n" | tftp 192.168.1.1 -echo Flashing 192.168.1.1 using $1... -echo -en "binary\nput $1 ASUSSPACELINK\nquit\n" | tftp 192.168.1.1 -echo Please wait until leds stops flashing. -elif [ "$2" == "linksys" ]; then -echo Flashing 192.168.1.1 using $1... -echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.1.1 -echo Please wait until power led stops flashing. Do not poweroff! Then you can login via telnet 192.168.1.1. -elif [ "$2" == "toshiba" ]; then -echo Flashing 192.168.10.1 using $1... -echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.10.1 -echo Unit will automatically reboot within 5 minutes. Do not power off. Then you can login via telnet 192.168.10.1. -fi diff --git a/scripts/flashing/adam2flash-502T.pl b/scripts/flashing/adam2flash-502T.pl new file mode 100644 index 0000000000..0ed296d60f --- /dev/null +++ b/scripts/flashing/adam2flash-502T.pl @@ -0,0 +1,340 @@ +#!/usr/bin/env perl +# +# D-Link DSL-502T flash utility +# +# Copyright (c) 2007 Oliver Jowett +# +# Based on adam2flash.pl for the D-Link DSL-G6x4T, which is: +# Copyright (C) 2005 Felix Fietkau +# based on fbox recovery util by Enrik Berkhan +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# + +# The default DSL-502T mtd map looks like this: +# +# mtd0 0x90091000,0x903f0000 # filesystem +# mtd1 0x90010090,0x90091000 # kernel +# mtd2 0x90000000,0x90010000 # bootloader - DO NOT MODIFY +# mtd3 0x903f0000,0x90400000 # config space - DO NOT MODIFY +# mtd4 0x90010000,0x903f0000 # firmware signature + kernel + filesystem, used to flash new firmware +# +# i.e. the flash layout is: +# +# 90000000-9000FFFF mtd2 bootloader +# 90010000-9001008F ---- firmware signature ) +# 90010090-90090FFF mtd1 kernel ) mtd4 spans these three regions +# 90091000-903EFFFF mtd0 filesystem ) +# 903F0000-903FFFFF mtd3 config space +# +# The ADAM2 bootloader uses the mtd1 settings to find the start of the image to boot. +# The image to load contains information about the loadable size of the image. If ADAM2 sees +# that the image appears to extend beyond the end of mtd1, it will refuse to load it. On +# the DSL-502T, this manifests as the USB light blinking rapidly on boot. +# +# The OpenWRT kernel does not follow quite the same layout: +# (a) it does not have a 0x90-byte firmware signature prefix +# (b) it is larger than the default mtd1 size +# +# (a) would be avoidable (build a custom image with a 0x90-byte prefix) but (b) is unavoidable. +# So we *have* to change mtd1. The simplest thing to do seems to make it span all of +# the flashable area, producing this layout: +# +# mtd0 0x90091000,0x903f0000 # filesystem +# mtd1 0x90010000,0x903f0000 # kernel (CHANGED) +# mtd2 0x90000000,0x90010000 # bootloader - DO NOT MODIFY +# mtd3 0x903f0000,0x90400000 # config space - DO NOT MODIFY +# mtd4 0x90010000,0x903f0000 # kernel + filesystem, used to flash new firmware +# +# *** NOTE NOTE NOTE NOTE *** +# +# /dev/mtd0 .. /dev/mtd4 when using OpenWRT do **NOT** correspond to the ADAM2 mtd0-4 settings! +# Instead, OpenWRT scans the MTD itself and determines its own boundaries which are arranged +# quite differently to ADAM2. It will look something like this, see dmsg on boot: +# +# (/dev/mtd0) 0x00000000-0x00010000 : "loader" # Bootloader, read-only +# (/dev/mtd1) 0x003f0000-0x00400000 : "config" # Config space +# (/dev/mtd2) 0x00010000-0x003f0000 : "linux" # Firmware area (kernel + root fs + JFFS area) +# (/dev/mtd3) 0x000d0d58-0x003f0000 : "rootfs" # Root FS, starts immediately after kernel +# (/dev/mtd4) 0x00280000-0x003f0000 : "rootfs_data" # If rootfs is squashfs, start of JFFS area. +# +# All of those boundaries are autodetected by examining the data in flash. +# +# *** NOTE NOTE NOTE NOTE *** + +use IO::Socket::INET; +use Socket; +use strict; +use warnings; + +sub usage() { + print STDERR "Usage: $0 [-setmtd1] [-noflash] [firmware.bin]\n\n"; + print STDERR "Acquires the ADAM2 bootloader of a D-Link DSL-504T at \n"; + print STDERR "Power off the device, start this script, then power it on.\n"; + print STDERR " may be any spare address on the local subnet.\n\n"; + print STDERR "If a firmware file is specified, MTD settings are verified and\n"; + print STDERR "then the firmware is written to the router's flash.\n"; + print STDERR "The firmware type (D-Link or OpenWRT) is automatically detected.\n\n"; + print STDERR " -setmtd1 update mtd1 if it is not the appropriate value for this firmware\n"; + print STDERR " -noflash does normal checks, updates mtd1 if requested, but does not actually write firmware\n\n"; + exit 0; +} + +my $ip = shift @ARGV; +$ip and $ip =~ /\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}/ or usage(); + +my $probe = IO::Socket::INET->new(Proto => 'udp', + Broadcast => 1, + LocalPort => 5035) or die "socket: $!"; +my $setip = unpack("N", inet_aton($ip)); +$setip > 0 or usage(); + +my @packets; +foreach my $ver ([18, 1], [22, 2]) { + push @packets, pack("vCCVNV", 0, @$ver, 1, $setip, 0); +} +print STDERR "Looking for device: "; +my $broadcast = sockaddr_in(5035, INADDR_BROADCAST); +my $scanning; +my $box; + +$SIG{"ALRM"} = sub { + return if --$scanning <= 0; + foreach my $packet (@packets) { + $probe->send($packet, 0, $broadcast); + } + print STDERR "."; +}; + +$scanning = 15; +foreach my $packet (@packets) { + $probe->send($packet, 0, $broadcast); +} +print STDERR "."; + +while($scanning) { + my $reply; + + alarm(1); + if (my $peer = $probe->recv($reply, 16)) { + next if (length($reply) < 16); + my ($port, $addr) = sockaddr_in($peer); + my ($major, $minor1, $minor2, $code, $addr2) = unpack("vCCVV", $reply); + $addr2 = pack("N", $addr2); + if ($code == 2) { + $scanning = 0; + printf STDERR " found!\nADAM2 version $major.$minor1.$minor2 at %s (%s)\n", inet_ntoa($addr), inet_ntoa($addr2); + $box = inet_ntoa($addr); + } + } +} + +$box or die " not found!\n"; + +{ + package ADAM2FTP; + use base qw(Net::FTP); + + # ADAM2 requires upper case commands, some brain dead firewall doesn't ;-) + sub _USER { + shift->command("USER",@_)->response() + } + + sub _GETENV { + my $ftp = shift; + my ($ok, $name, $value); + + $ftp->command("GETENV",@_); + while(length($ok = $ftp->response()) < 1) { + my $line = $ftp->getline(); + unless (defined($value)) { + chomp($line); + ($name, $value) = split(/\s+/, $line, 2); + } + } + $ftp->debug_print(0, "getenv: $value\n") + if $ftp->debug(); + return $value; + } + + sub getenv { + my $ftp = shift; + my $name = shift; + return $ftp->_GETENV($name); + } + + sub _REBOOT { + shift->command("REBOOT")->response() == Net::FTP::CMD_OK + } + + sub reboot { + my $ftp = shift; + $ftp->_REBOOT; + $ftp->close; + } +} + +my $file; +my $arg; +my $noflash = 0; +my $setmtd1 = 0; +while ($arg = shift @ARGV) { + if ($arg eq "-noflash") { $noflash = 1; } + elsif ($arg eq "-setmtd1") { $setmtd1 = 1; } + else { $file = $arg; } +} + +if (!$file) { + print STDERR "No firmware file specified, exiting.\n"; + exit 0; +} + +# +# Firmware checks +# + +open FILE, "<$file" or die "can't open firmware file\n"; + +# D-Link firmware starts with "MTD4" little-endian, then has an image header at 0x90 +# OpenWRT firmware just starts with an image header at 0x00 + +my $signature; +my $sbytes = read FILE, $signature, 4; +($sbytes == 4) or die "can't read firmware signature: $!"; + +my $expectedmtd4 = "0x90010000,0x903f0000"; +my $fwtype; +my $expectedmtd1; + +if ($signature eq "4DTM") { + seek FILE, 0x90, 0 or die "can't read firmware signature: $!"; + $sbytes = read FILE, $signature, 4; + ($sbytes == 4) or die "can't read firmware signature: $!"; + if ($signature eq "\x42\xfa\xed\xfe") { + $fwtype = "D-Link (little-endian)"; + $expectedmtd1 = "0x90010090,0x90091000"; + } elsif ($signature eq "\xde\xad\xbe\x42") { + $fwtype = "D-Link (big-endian)"; + $expectedmtd1 = "0x90010090,0x90091000"; + } +} elsif ($signature eq "\x42\xfa\xed\xfe") { + $fwtype = "OpenWRT (little-endian)"; + $expectedmtd1 = "0x90010000,0x903f0000"; +} elsif ($signature eq "\xde\xad\xbe\x42") { + $fwtype = "OpenWRT (big-endian)"; + $expectedmtd1 = "0x90010000,0x903f0000"; +} + +$fwtype or die "Unknown firmware signature (are you sure that's the right firmware?)"; +print STDERR "Firmware type: $fwtype\n"; + +# +# Bootloader login +# + +print STDERR "logging into ADAM2 bootloader.. "; +my $ftp = ADAM2FTP->new($box, Debug => 0, Timeout => 600) or die "can't open control connection\n"; +$ftp->login("adam2", "adam2") or die "can't login\n"; +print STDERR "ok.\n"; + +# +# Hardware checks +# + +print STDERR "checking hardware.. "; +my $prd = $ftp->getenv("ProductID"); +my $usb = $ftp->getenv("usb_prod"); +print STDERR "$prd / $usb.\n"; +($prd eq "AR7RD" || $prd eq "AR7DB") or die "doesn't look like a DSL-502T?"; +($usb eq "DSL-502T") or die "doesn't look like a DSL-502T?"; + +# +# MTD checks and update +# + +print STDERR "checking MTD settings.. "; + +my $mtd4 = $ftp->getenv("mtd4"); +($mtd4 eq $expectedmtd4) or die "MTD4 was not as expected (should be '$expectedmtd4', was '$mtd4'). Cowardly refusing to do anything about it!"; + +# check MTD1 setting and update if needed +my $mtd1 = $ftp->getenv("mtd1"); +if ($mtd1 ne $expectedmtd1) { + die "MTD1 was not as expected (should be '$expectedmtd1', was '$mtd1'). Run with -setmtd1 to reset mtd1" unless ($setmtd1); + print STDERR "Setting mtd1.. "; + ($ftp->command("SETENV","mtd1,$expectedmtd1")->response() == Net::FTP::CMD_OK) or die "can't set mtd1"; + $file = shift @ARGV; +} + +print STDERR "ok.\n"; + +# +# Firmware size check +# + +my $fwsize = (stat(FILE))[7]; +printf STDERR "Firmware size: 0x%08x\n", $fwsize; +my $flashsize; +$mtd4 =~ /^(0x\w+),(0x\w+)$/ and $flashsize = hex($2) - hex($1); +printf STDERR "Available flash space: 0x%08x\n", $flashsize; +die "firmware is too large" if ($flashsize < $fwsize); + +# +# Flash it! +# + +if ($noflash) { + print STDERR "Not flashing firmware as -noflash was specified.\n"; + exit 0; +} + +seek FILE, 0, 0, or die "can't seek in firmware: $!"; + +print STDERR "Preparing to flash.. "; +($ftp->command("MEDIA FLSH")->response() == Net::FTP::CMD_OK) or die "can't set MEDIA FLSH"; +$ftp->binary() or die "can't set binary mode"; +print STDERR "ok.\n"; +print STDERR "Erasing flash and establishing data connection (this may take a while): "; + +my $dc = $ftp->stor("fs mtd4"); +$dc or die "can't open data connection: $!\n"; +print STDERR "ok.\n"; + +print STDERR "Writing firmware: "; +while ($fwsize > 0) { + my $buffer; + my $len = ($fwsize > 1024 ? 1024 : $fwsize); + + my $rbytes = read FILE, $buffer, $len; + ($rbytes < 0) and die "read error on firmware file: $!"; + ($rbytes == $len) or die "short read on firmware file ($rbytes < $len)"; + + my $wbytes = $dc->write($buffer, $len, 600); + ($wbytes < 0) and die "write error on FTP data connection: $!"; + ($rbytes == $wbytes) or die "short write on FTP data connection ($wbytes < $rbytes)"; + + $fwsize -= $len; + print STDERR "."; +} + +$dc->close(); +print STDERR " done.\n"; + +# +# Reboot +# + +print STDERR "Rebooting device.\n"; +$ftp->reboot(); diff --git a/scripts/flashing/adam2flash-fritzbox.pl b/scripts/flashing/adam2flash-fritzbox.pl new file mode 100644 index 0000000000..f8d745f678 --- /dev/null +++ b/scripts/flashing/adam2flash-fritzbox.pl @@ -0,0 +1,209 @@ +#!/usr/bin/env perl +# +# D-Link DSL-G6x4T flash utility +# +# Copyright (C) 2005 Felix Fietkau +# based on fbox recovery util by Enrik Berkhan +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# + +use IO::Socket::INET; +use IO::Select; +use Socket; +use strict; +use warnings; + +sub usage() { + print STDERR "Usage: $0 [firmware.bin]\n\n"; + exit 0; +} + +my $ip = shift @ARGV; +$ip and $ip =~ /\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}/ or usage(); + +my $setip = unpack("N", inet_aton($ip)); +$setip > 0 or usage(); + +my @packets; +foreach my $ver ([18, 1], [22, 2]) { + push @packets, pack("vCCVNV", 0, @$ver, 1, $setip, 0); +} +print STDERR "Looking for device: "; +my $scanning; +my $box; + +my $probe = IO::Socket::INET->new(Proto => 'udp', + Broadcast => 1, + LocalAddr => $ip, + LocalPort => 5035) or die "socket: $!"; +my $sel = IO::Select->new($probe); +my $packet = pack("vCCVNV", 0, 18, 1, 1, 0, 0); +my $broadcast = sockaddr_in(5035, INADDR_BROADCAST); + +$probe->send($packet, 0, $broadcast); + + +scan_again: +print "Looking for Fritz!Box "; +my @boxes = (); +my $peer; +$scanning = 100; +print "o"; +while($scanning) { + my $reply; + my @ready; + + if (@ready = $sel->can_read(0.2)) { + $peer = $probe->recv($reply, 16); + next if (length($reply) < 16); + my ($port, $addr) = sockaddr_in($peer); + my ($major, $minor1, $minor2, $code, $addr2) = unpack("vCCVV", $reply); + $addr2 = pack("N", $addr2); + if ($code == 2) { + print "O"; + push @boxes, [$major, $minor1, $minor2, $addr, $addr2]; + $scanning = 2 if ($scanning > 2); + } + } else { + $scanning--; + if (scalar @boxes == 0) { + $probe->send($packet, 0, $broadcast); + print "o"; + } else { + print "."; + } + } +} + +if (scalar @boxes == 0) { + print " none found, giving up.\n"; + exit 1; +} else { + print " found!\n"; +} + +{ + package ADAM2FTP; + use base qw(Net::FTP); + # ADAM2 requires upper case commands, some brain dead firewall doesn't ;-) + sub _USER { shift->command("USER",@_)->response() } + sub _PASV { shift->command("P\@SW")->response() == Net::FTP::CMD_OK } + sub _GETENV { + my $ftp = shift; + my ($ok, $name, $value); + + $ftp->command("GETENV",@_); + while(length($ok = $ftp->response()) < 1) { + my $line = $ftp->getline(); + unless (defined($value)) { + chomp($line); + ($name, $value) = split(/\s+/, $line, 2); + } + } + $ftp->debug_print(0, "getenv: $value\n") + if $ftp->debug(); + return $value; + } + sub getenv { + my $ftp = shift; + my $name = shift; + return $ftp->_GETENV($name); + } + sub _REBOOT { shift->command("REBOOT")->response() == Net::FTP::CMD_OK } + sub reboot { + my $ftp = shift; + $ftp->_REBOOT; + $ftp->close; + } + sub check { + my $ftp = shift; + + delete ${*$ftp}{'net_ftp_port'}; + delete ${*$ftp}{'net_ftp_pasv'}; + + my $data = $ftp->_data_cmd('CHECK' ,@_) or return undef; + my $sum; + if (${${*$ftp}{'net_cmd_resp'}}[0] =~ /^Flash check 0x([0-9A-F]{8})/) { + $sum = hex($1); + } + $data->_close(); + return $sum; + } +} + +# passive mode geht mit Net::FTP nicht, connected zu spaet fuer ADAM2! +my $ftp = ADAM2FTP->new($ip, Passive => 0, Debug => 0, Timeout => 600) + or die "can't FTP ADAM2"; +$ftp->login("adam2", "adam2") or die "can't login adam2"; +$ftp->binary(); +my $pid = $ftp->getenv('ProductID'); +my $hwrev = $ftp->getenv('HWRevision'); +my $fwrev = $ftp->getenv('firmware_info'); +my $ulrev = $ftp->getenv('urlader-version'); + +print "Product ID: $pid\n"; +print "Hardware Revision: $hwrev\n"; +print "Urlader Revision: $ulrev\n"; +print "Firmware Revision: $fwrev\n"; + +$ftp->hash(\*STDOUT, 64 * 1024); + +my $file = shift @ARGV; +$file || exit 0; + +open FILE, "<$file" or die "can't open firmware file\n"; + +my $mtd0 = $ftp->getenv("mtd0"); +my $mtd1 = $ftp->getenv("mtd1"); +my ($ksize, $fssize); + +$mtd1 =~ /^(0x\w+),(0x\w+)$/ and $ksize = hex($2) - hex($1); +$mtd0 =~ /^(0x\w+),(0x\w+)$/ and $fssize = hex($2) - hex($1); +$ksize and $fssize or die 'cannot read partition offsets'; +printf STDERR "Available flash space: 0x%08x (0x%08x + 0x%08x)\n", $ksize + $fssize, $ksize, $fssize; + +$ftp->command("MEDIA FLSH")->response(); +$ftp->binary(); +print STDERR "Writing to mtd1...\n"; + +my $dc = $ftp->stor("fs mtd1"); +$dc or die "can't open data connection\n"; +my $rbytes = 1; + +while (($ksize > 0) and ($rbytes > 0)) { + my $buffer; + my $len = ($ksize > 1024 ? 1024 : $ksize); + $rbytes = read FILE, $buffer, $len; + $rbytes and $ksize -= $dc->write($buffer, $rbytes, 600); +} + +$dc->close(); +$rbytes or die "no more data left to write\n"; + +print STDERR "Writing to mtd0...\n"; + +$dc = $ftp->stor("fs mtd0"); +$dc or die "can't open data connection\n"; + +while (($fssize > 0) and ($rbytes > 0)) { + my $buffer; + my $len = ($fssize > 1024 ? 1024 : $fssize); + $rbytes = read FILE, $buffer, $len; + $rbytes and $fssize -= $dc->write($buffer, $rbytes, 600); +} + +$dc->close(); +$ftp->reboot(); diff --git a/scripts/flashing/adam2flash.pl b/scripts/flashing/adam2flash.pl new file mode 100755 index 0000000000..8550f80a8a --- /dev/null +++ b/scripts/flashing/adam2flash.pl @@ -0,0 +1,174 @@ +#!/usr/bin/env perl +# +# D-Link DSL-G6x4T flash utility +# +# Copyright (C) 2005 Felix Fietkau +# based on fbox recovery util by Enrik Berkhan +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# + +use IO::Socket::INET; +use Socket; +use strict; +use warnings; + +sub usage() { + print STDERR "Usage: $0 [firmware.bin]\n\n"; + exit 0; +} + +my $ip = shift @ARGV; +$ip and $ip =~ /\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}/ or usage(); + +my $probe = IO::Socket::INET->new(Proto => 'udp', + Broadcast => 1, + LocalPort => 5035) or die "socket: $!"; +my $setip = unpack("N", inet_aton($ip)); +$setip > 0 or usage(); + +my @packets; +foreach my $ver ([18, 1], [22, 2]) { + push @packets, pack("vCCVNV", 0, @$ver, 1, $setip, 0); +} +print STDERR "Looking for device: "; +my $broadcast = sockaddr_in(5035, INADDR_BROADCAST); +my $scanning; +my $box; + +$SIG{"ALRM"} = sub { + return if --$scanning <= 0; + foreach my $packet (@packets) { + $probe->send($packet, 0, $broadcast); + } + print STDERR "."; +}; + +$scanning = 10; +foreach my $packet (@packets) { + $probe->send($packet, 0, $broadcast); +} +print STDERR "."; + +while($scanning) { + my $reply; + + alarm(1); + if (my $peer = $probe->recv($reply, 16)) { + next if (length($reply) < 16); + my ($port, $addr) = sockaddr_in($peer); + my ($major, $minor1, $minor2, $code, $addr2) = unpack("vCCVV", $reply); + $addr2 = pack("N", $addr2); + if ($code == 2) { + $scanning = 0; + printf STDERR " found!\nADAM2 version $major.$minor1.$minor2 at %s (%s)\n", inet_ntoa($addr), inet_ntoa($addr2); + $box = inet_ntoa($addr); + } + } +} + +$box or die " not found!\n"; + +{ + package ADAM2FTP; + use base qw(Net::FTP); + + # ADAM2 requires upper case commands, some brain dead firewall doesn't ;-) + sub _USER { + shift->command("USER",@_)->response() + } + + sub _GETENV { + my $ftp = shift; + my ($ok, $name, $value); + + $ftp->command("GETENV",@_); + while(length($ok = $ftp->response()) < 1) { + my $line = $ftp->getline(); + unless (defined($value)) { + chomp($line); + ($name, $value) = split(/\s+/, $line, 2); + } + } + $ftp->debug_print(0, "getenv: $value\n") + if $ftp->debug(); + return $value; + } + + sub getenv { + my $ftp = shift; + my $name = shift; + return $ftp->_GETENV($name); + } + + sub _REBOOT { + shift->command("REBOOT")->response() == Net::FTP::CMD_OK + } + + sub reboot { + my $ftp = shift; + $ftp->_REBOOT; + $ftp->close; + } +} + +my $file = shift @ARGV; +$file || exit 0; + +open FILE, "<$file" or die "can't open firmware file\n"; +my $ftp = ADAM2FTP->new($box, Debug => 0, Timeout => 600) or die "can't open control connection\n"; +$ftp->login("adam2", "adam2") or die "can't login\n"; + +my $mtd0 = $ftp->getenv("mtd0"); +my $mtd1 = $ftp->getenv("mtd1"); +my ($ksize, $fssize); + +$mtd1 =~ /^(0x\w+),(0x\w+)$/ and $ksize = hex($2) - hex($1); +$mtd0 =~ /^(0x\w+),(0x\w+)$/ and $fssize = hex($2) - hex($1); +$ksize and $fssize or die 'cannot read partition offsets'; +printf STDERR "Available flash space: 0x%08x (0x%08x + 0x%08x)\n", $ksize + $fssize, $ksize, $fssize; + +$ftp->command("MEDIA FLSH")->response(); +$ftp->binary(); +print STDERR "Writing to mtd1...\n"; + +my $dc = $ftp->stor("fs mtd1"); +$dc or die "can't open data connection\n"; +my $rbytes = 1; + +while (($ksize > 0) and ($rbytes > 0)) { + my $buffer; + my $len = ($ksize > 1024 ? 1024 : $ksize); + $rbytes = read FILE, $buffer, $len; + $rbytes and $ksize -= $dc->write($buffer, $rbytes, 600); +} + +$dc->close(); +$rbytes or die "no more data left to write\n"; + +print STDERR "Writing to mtd0...\n"; + +$dc = $ftp->stor("fs mtd0"); +$dc or die "can't open data connection\n"; + +while (($fssize > 0) and ($rbytes > 0)) { + my $buffer; + my $len = ($fssize > 1024 ? 1024 : $fssize); + $rbytes = read FILE, $buffer, $len; + $rbytes and $fssize -= $dc->write($buffer, $rbytes, 600); +} + +$dc->close(); +$ftp->reboot(); diff --git a/scripts/flashing/adsl2mue_flash.pl b/scripts/flashing/adsl2mue_flash.pl new file mode 100644 index 0000000000..c206c471fd --- /dev/null +++ b/scripts/flashing/adsl2mue_flash.pl @@ -0,0 +1,170 @@ +#!/usr/bin/perl +# +# Linksys ADSL2MUE Flash utility. +# +# Copyright (C) 2008 Alexandre Lissy +# based on D-Link DSL-G6x4T flash utility by Felix Fietkau +# based on fbox recovery util by Enrik Berkhan +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# + +use IO::Socket::INET; +use Socket; +use strict; +use warnings; + +sub usage() { + print STDERR "Usage: $0 [firmware.bin] [partition]\n\n"; + exit 0; +} + +my $ip = shift @ARGV; +$ip and $ip =~ /\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}/ or usage(); + +my $probe = IO::Socket::INET->new(Proto => 'udp', + Broadcast => 1, + LocalPort => 5035) or die "socket: $!"; +my $setip = unpack("N", inet_aton($ip)); +$setip > 0 or usage(); + +my @packets; +foreach my $ver ([18, 1], [22, 2]) { + push @packets, pack("vCCVNV", 0, @$ver, 1, $setip, 0); +} +print STDERR "Looking for device: "; +my $broadcast = sockaddr_in(5035, INADDR_BROADCAST); +my $scanning; +my $box; + +$SIG{"ALRM"} = sub { + return if --$scanning <= 0; + foreach my $packet (@packets) { + $probe->send($packet, 0, $broadcast); + } + print STDERR "."; +}; + +$scanning = 10; +foreach my $packet (@packets) { + $probe->send($packet, 0, $broadcast); +} +print STDERR "."; + +while($scanning) { + my $reply; + + alarm(1); + if (my $peer = $probe->recv($reply, 16)) { + next if (length($reply) < 16); + my ($port, $addr) = sockaddr_in($peer); + my ($major, $minor1, $minor2, $code, $addr2) = unpack("vCCVN", $reply); + $addr2 = pack("N", $addr2); + if ($code == 1) { + $scanning = 0; + printf STDERR " found!\nADAM2 version $major.$minor1.$minor2 at %s (%s)\n", inet_ntoa($addr2), inet_ntoa($addr); + $box = inet_ntoa($addr2); + } + } +} + +$box or die " not found!\n"; + +{ + package ADAM2FTP; + use base qw(Net::FTP); + + # ADAM2 requires upper case commands, some brain dead firewall doesn't ;-) + sub _USER { + shift->command("USER",@_)->response() + } + + sub _GETENV { + my $ftp = shift; + my ($ok, $name, $value); + + $ftp->command("GETENV",@_); + while(length($ok = $ftp->response()) < 1) { + my $line = $ftp->getline(); + unless (defined($value)) { + chomp($line); + ($name, $value) = split(/\s+/, $line, 2); + } + } + $ftp->debug_print(0, "getenv: $value\n") + if $ftp->debug(); + return $value; + } + + sub getenv { + my $ftp = shift; + my $name = shift; + return $ftp->_GETENV($name); + } + + sub _REBOOT { + shift->command("REBOOT")->response() == Net::FTP::CMD_OK + } + + sub reboot { + my $ftp = shift; + $ftp->_REBOOT; + $ftp->close; + } +} + +my $file = shift @ARGV; +my $part = shift @ARGV; +$file || exit 0; +$part || exit 0; + +open FILE, "<$file" or die "can't open firmware file\n"; +my $ftp = ADAM2FTP->new($box, Debug => 0, Timeout => 600) or die "can't open control connection\n"; +$ftp->login("adam2", "adam2") or die "can't login\n"; + +# my $mtd0 = $ftp->getenv("mtd0"); +# my $mtd1 = $ftp->getenv("mtd1"); +my $mtd4 = $ftp->getenv($part); +# my ($ksize, $fssize); +my ($ossize, $mtd_start, $mtd_end); + +# $mtd1 =~ /^(0x\w+),(0x\w+)$/ and $ksize = hex($2) - hex($1); +# $mtd0 =~ /^(0x\w+),(0x\w+)$/ and $fssize = hex($2) - hex($1); +$mtd4 =~ /^(0x\w+),(0x\w+)$/; +$ossize = hex($2) - hex($1); +$mtd_start = hex($1); +$mtd_end = hex($2); +$ossize and $mtd_start and $mtd_end or die 'cannot read partition offsets'; +printf STDERR "Available flash space: 0x%08x ($part: 0x%08x to 0x%08x)\n", $ossize, $mtd_start, $mtd_end; + +$ftp->command("MEDIA FLSH")->response(); +$ftp->binary(); + +print STDERR "Writing to $part ...\n"; +my $dc = $ftp->stor("data $part"); +$dc or die "can't open data connection\n"; +my $rbytes = 1; + +while (($ossize > 0) and ($rbytes > 0)) { + my $buffer; + my $len = ($ossize > 1024 ? 1024 : $ossize); + $rbytes = read FILE, $buffer, $len; + printf STDERR "."; + $rbytes and $ossize -= $dc->write($buffer, $rbytes, 600); +} + +printf STDERR "\nDone.\n"; + +$dc->close(); diff --git a/scripts/flashing/flash.sh b/scripts/flashing/flash.sh new file mode 100755 index 0000000000..8841c35684 --- /dev/null +++ b/scripts/flashing/flash.sh @@ -0,0 +1,66 @@ +#!/bin/bash +# +# tftp flash script for wireless routers +# +# Copyright (C) 2004 by Oleg I. Vdovikin +# Copyright (C) 2005 by Waldemar Brodkorb +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# + +if [ -z "$1" ] || [ ! -f $1 ] || [ -z $2 ]; then + echo Usage: $0 firmware vendor +cat << EOF +IMPORTANT: +Notes for Linksys / Asus WL500gx router: + be sure you have set boot_wait to yes. Power on your router + after executing this script. + +Notes for Asus WL500g router: + be sure POWER led is flashing (If this is not the case + poweroff the device, push the reset button & power on + it again, then release button) + +1) connect your pc to the LAN port +2) be sure your link is up and has an address in the + 192.168.1.0/24 address range (and not the 192.168.1.1) + +Notes for Toshiba router: + boot_wait is enabled by default on these units. + +1) connect your pc to any of the four LAN ports +2) be sure your link is up and has an address in the + 192.168.10.1/24 address range (and not the 192.168.10.1) +3) run this script (unit will only accept .trx images) +4) Turn unit power on. + +EOF + exit 0 +fi +if [ "$2" == "asus" ]; then +echo Confirming IP address setting... +echo -en "get ASUSSPACELINK\x01\x01\xa8\xc0 /dev/null\nquit\n" | tftp 192.168.1.1 +echo Flashing 192.168.1.1 using $1... +echo -en "binary\nput $1 ASUSSPACELINK\nquit\n" | tftp 192.168.1.1 +echo Please wait until leds stops flashing. +elif [ "$2" == "linksys" ]; then +echo Flashing 192.168.1.1 using $1... +echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.1.1 +echo Please wait until power led stops flashing. Do not poweroff! Then you can login via telnet 192.168.1.1. +elif [ "$2" == "toshiba" ]; then +echo Flashing 192.168.10.1 using $1... +echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.10.1 +echo Unit will automatically reboot within 5 minutes. Do not power off. Then you can login via telnet 192.168.10.1. +fi