From: Christian Marangi Date: Mon, 17 Jun 2024 16:23:44 +0000 (+0200) Subject: mac80211: ath10k: replace LEDs patch with upstream patch X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=dc9c5d1ee72564d97b7d76ab4db239e038916d31;p=openwrt%2Fstaging%2Fnbd.git mac80211: ath10k: replace LEDs patch with upstream patch LEDs support for ath10k has finally merged upstream hence replace it with the upstream version. Signed-off-by: Christian Marangi --- diff --git a/package/kernel/ath10k-ct/patches/0001-wifi-ath10k-add-LED-and-GPIO-controlling-support-for.patch:Zone.Identifier b/package/kernel/ath10k-ct/patches/0001-wifi-ath10k-add-LED-and-GPIO-controlling-support-for.patch:Zone.Identifier new file mode 100644 index 0000000000..e69de29bb2 diff --git a/package/kernel/ath10k-ct/patches/201-wifi-ath10k-add-LED-and-GPIO-controlling-support-for.patch b/package/kernel/ath10k-ct/patches/201-wifi-ath10k-add-LED-and-GPIO-controlling-support-for.patch new file mode 100644 index 0000000000..c8d74f0e4a --- /dev/null +++ b/package/kernel/ath10k-ct/patches/201-wifi-ath10k-add-LED-and-GPIO-controlling-support-for.patch @@ -0,0 +1,645 @@ +From 8e1debd82466a3fe711784ab37e6b54e56011267 Mon Sep 17 00:00:00 2001 +From: Sebastian Gottschall +Date: Mon, 13 May 2024 17:22:25 +0300 +Subject: [PATCH] wifi: ath10k: add LED and GPIO controlling support for + various chipsets + +Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984 +based chipsets with on chipset connected led's using WMI Firmware API. +The LED device will get available named as "ath10k-phyX" at sysfs and +can be controlled with various triggers. +Adds also debugfs interface for gpio control. + +Signed-off-by: Sebastian Gottschall +Reviewed-by: Steve deRosier +[kvalo: major reorg and cleanup] +Signed-off-by: Kalle Valo +[ansuel: rebase and small cleanup] +Signed-off-by: Christian Marangi +Tested-by: Stefan Lippers-Hollmann +Signed-off-by: Kalle Valo +Link: https://msgid.link/20230611080505.17393-1-ansuelsmth@gmail.com +--- + drivers/net/wireless/ath/ath10k/Kconfig | 6 ++ + drivers/net/wireless/ath/ath10k/Makefile | 1 + + drivers/net/wireless/ath/ath10k/core.c | 32 ++++++++ + drivers/net/wireless/ath/ath10k/core.h | 8 ++ + drivers/net/wireless/ath/ath10k/hw.h | 1 + + drivers/net/wireless/ath/ath10k/leds.c | 90 +++++++++++++++++++++++ + drivers/net/wireless/ath/ath10k/leds.h | 34 +++++++++ + drivers/net/wireless/ath/ath10k/mac.c | 1 + + drivers/net/wireless/ath/ath10k/wmi-ops.h | 32 ++++++++ + drivers/net/wireless/ath/ath10k/wmi-tlv.c | 2 + + drivers/net/wireless/ath/ath10k/wmi.c | 54 ++++++++++++++ + drivers/net/wireless/ath/ath10k/wmi.h | 35 +++++++++ + 12 files changed, 296 insertions(+) + create mode 100644 drivers/net/wireless/ath/ath10k/leds.c + create mode 100644 drivers/net/wireless/ath/ath10k/leds.h + +diff --git a/drivers/net/wireless/ath/ath10k/Kconfig b/drivers/net/wireless/ath/ath10k/Kconfig +index e6ea884cafc1..76572cd2e1ba 100644 +--- a/drivers/net/wireless/ath/ath10k/Kconfig ++++ b/drivers/net/wireless/ath/ath10k/Kconfig +@@ -67,6 +67,12 @@ config ATH10K_DEBUGFS + + If unsure, say Y to make it easier to debug problems. + ++config ATH10K_LEDS ++ bool ++ depends on ATH10K ++ depends on LEDS_CLASS=y || LEDS_CLASS=MAC80211 ++ default y ++ + config ATH10K_SPECTRAL + bool "Atheros ath10k spectral scan support" + depends on ATH10K_DEBUGFS +diff --git a/drivers/net/wireless/ath/ath10k/Makefile b/drivers/net/wireless/ath/ath10k/Makefile +index 142c777b287f..02bf9b629038 100644 +--- a/drivers/net/wireless/ath/ath10k/Makefile ++++ b/drivers/net/wireless/ath/ath10k/Makefile +@@ -19,6 +19,7 @@ ath10k_core-$(CONFIG_ATH10K_SPECTRAL) += spectral.o + ath10k_core-$(CONFIG_NL80211_TESTMODE) += testmode.o + ath10k_core-$(CONFIG_ATH10K_TRACING) += trace.o + ath10k_core-$(CONFIG_THERMAL) += thermal.o ++ath10k_core-$(CONFIG_ATH10K_LEDS) += leds.o + ath10k_core-$(CONFIG_MAC80211_DEBUGFS) += debugfs_sta.o + ath10k_core-$(CONFIG_PM) += wow.o + ath10k_core-$(CONFIG_DEV_COREDUMP) += coredump.o +diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c +index bdf0552cd1c3..b3294287bce1 100644 +--- a/drivers/net/wireless/ath/ath10k/core.c ++++ b/drivers/net/wireless/ath/ath10k/core.c +@@ -27,6 +27,7 @@ + #include "testmode.h" + #include "wmi-ops.h" + #include "coredump.h" ++#include "leds.h" + + unsigned int ath10k_debug_mask; + EXPORT_SYMBOL(ath10k_debug_mask); +@@ -68,6 +69,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { + .name = "qca988x hw2.0", + .patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR, + .uart_pin = 7, ++ .led_pin = 1, + .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, +@@ -108,6 +110,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { + .name = "qca988x hw2.0 ubiquiti", + .patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR, + .uart_pin = 7, ++ .led_pin = 0, + .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, +@@ -149,6 +152,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { + .name = "qca9887 hw1.0", + .patch_load_addr = QCA9887_HW_1_0_PATCH_LOAD_ADDR, + .uart_pin = 7, ++ .led_pin = 1, + .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, +@@ -190,6 +194,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { + .name = "qca6174 hw3.2 sdio", + .patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR, + .uart_pin = 19, ++ .led_pin = 0, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, +@@ -226,6 +231,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { + .name = "qca6164 hw2.1", + .patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR, + .uart_pin = 6, ++ .led_pin = 0, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, +@@ -266,6 +272,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { + .name = "qca6174 hw2.1", + .patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR, + .uart_pin = 6, ++ .led_pin = 0, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, +@@ -306,6 +313,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { + .name = "qca6174 hw3.0", + .patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR, + .uart_pin = 6, ++ .led_pin = 0, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, +@@ -346,6 +354,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { + .name = "qca6174 hw3.2", + .patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR, + .uart_pin = 6, ++ .led_pin = 0, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, +@@ -390,6 +399,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { + .name = "qca99x0 hw2.0", + .patch_load_addr = QCA99X0_HW_2_0_PATCH_LOAD_ADDR, + .uart_pin = 7, ++ .led_pin = 17, + .otp_exe_param = 0x00000700, + .continuous_frag_desc = true, + .cck_rate_map_rev2 = true, +@@ -436,6 +446,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { + .name = "qca9984/qca9994 hw1.0", + .patch_load_addr = QCA9984_HW_1_0_PATCH_LOAD_ADDR, + .uart_pin = 7, ++ .led_pin = 17, + .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH, + .otp_exe_param = 0x00000700, + .continuous_frag_desc = true, +@@ -488,6 +499,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { + .name = "qca9888 hw2.0", + .patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR, + .uart_pin = 7, ++ .led_pin = 17, + .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH, + .otp_exe_param = 0x00000700, + .continuous_frag_desc = true, +@@ -538,6 +550,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { + .name = "qca9377 hw1.0", + .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR, + .uart_pin = 6, ++ .led_pin = 0, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, +@@ -578,6 +591,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { + .name = "qca9377 hw1.1", + .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR, + .uart_pin = 6, ++ .led_pin = 0, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, +@@ -620,6 +634,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { + .name = "qca9377 hw1.1 sdio", + .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR, + .uart_pin = 19, ++ .led_pin = 0, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, +@@ -653,6 +668,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { + .name = "qca4019 hw1.0", + .patch_load_addr = QCA4019_HW_1_0_PATCH_LOAD_ADDR, + .uart_pin = 7, ++ .led_pin = 0, + .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH, + .otp_exe_param = 0x0010000, + .continuous_frag_desc = true, +@@ -698,6 +714,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { + .dev_id = 0, + .bus = ATH10K_BUS_SNOC, + .name = "wcn3990 hw1.0", ++ .led_pin = 0, + .continuous_frag_desc = true, + .tx_chain_mask = 0x7, + .rx_chain_mask = 0x7, +@@ -3224,6 +3241,10 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode, + goto err_hif_stop; + } + ++ status = ath10k_leds_start(ar); ++ if (status) ++ goto err_hif_stop; ++ + return 0; + + err_hif_stop: +@@ -3482,9 +3503,18 @@ static void ath10k_core_register_work(struct work_struct *work) + goto err_spectral_destroy; + } + ++ status = ath10k_leds_register(ar); ++ if (status) { ++ ath10k_err(ar, "could not register leds: %d\n", ++ status); ++ goto err_thermal_unregister; ++ } ++ + set_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags); + return; + ++err_thermal_unregister: ++ ath10k_thermal_unregister(ar); + err_spectral_destroy: + ath10k_spectral_destroy(ar); + err_debug_destroy: +@@ -3520,6 +3550,8 @@ void ath10k_core_unregister(struct ath10k *ar) + if (!test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags)) + return; + ++ ath10k_leds_unregister(ar); ++ + ath10k_thermal_unregister(ar); + /* Stop spectral before unregistering from mac80211 to remove the + * relayfs debugfs file cleanly. Otherwise the parent debugfs tree +diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h +index b00099f0b24e..446dca74f06a 100644 +--- a/drivers/net/wireless/ath/ath10k/core.h ++++ b/drivers/net/wireless/ath/ath10k/core.h +@@ -15,6 +15,7 @@ + #include + #include + #include ++#include + + #include "htt.h" + #include "htc.h" +@@ -1258,6 +1259,13 @@ struct ath10k { + bool utf_monitor; + } testmode; + ++ struct { ++ struct gpio_led wifi_led; ++ struct led_classdev cdev; ++ char label[48]; ++ u32 gpio_state_pin; ++ } leds; ++ + struct { + /* protected by data_lock */ + u32 rx_crc_err_drop; +diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h +index 48897e5eca06..442091c6dfd2 100644 +--- a/drivers/net/wireless/ath/ath10k/hw.h ++++ b/drivers/net/wireless/ath/ath10k/hw.h +@@ -512,6 +512,7 @@ struct ath10k_hw_params { + const char *name; + u32 patch_load_addr; + int uart_pin; ++ int led_pin; + u32 otp_exe_param; + + /* Type of hw cycle counter wraparound logic, for more info +diff --git a/drivers/net/wireless/ath/ath10k/leds.c b/drivers/net/wireless/ath/ath10k/leds.c +new file mode 100644 +index 000000000000..9b1d04eb4265 +--- /dev/null ++++ b/drivers/net/wireless/ath/ath10k/leds.c +@@ -0,0 +1,90 @@ ++// SPDX-License-Identifier: ISC ++/* ++ * Copyright (c) 2005-2011 Atheros Communications Inc. ++ * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. ++ * Copyright (c) 2018 Sebastian Gottschall ++ * Copyright (c) 2018 The Linux Foundation. All rights reserved. ++ */ ++ ++#include ++ ++#include "core.h" ++#include "wmi.h" ++#include "wmi-ops.h" ++ ++#include "leds.h" ++ ++static int ath10k_leds_set_brightness_blocking(struct led_classdev *led_cdev, ++ enum led_brightness brightness) ++{ ++ struct ath10k *ar = container_of(led_cdev, struct ath10k, ++ leds.cdev); ++ struct gpio_led *led = &ar->leds.wifi_led; ++ ++ mutex_lock(&ar->conf_mutex); ++ ++ if (ar->state != ATH10K_STATE_ON) ++ goto out; ++ ++ ar->leds.gpio_state_pin = (brightness != LED_OFF) ^ led->active_low; ++ ath10k_wmi_gpio_output(ar, led->gpio, ar->leds.gpio_state_pin); ++ ++out: ++ mutex_unlock(&ar->conf_mutex); ++ ++ return 0; ++} ++ ++int ath10k_leds_start(struct ath10k *ar) ++{ ++ if (ar->hw_params.led_pin == 0) ++ /* leds not supported */ ++ return 0; ++ ++ /* under some circumstances, the gpio pin gets reconfigured ++ * to default state by the firmware, so we need to ++ * reconfigure it this behaviour has only ben seen on ++ * QCA9984 and QCA99XX devices so far ++ */ ++ ath10k_wmi_gpio_config(ar, ar->hw_params.led_pin, 0, ++ WMI_GPIO_PULL_NONE, WMI_GPIO_INTTYPE_DISABLE); ++ ath10k_wmi_gpio_output(ar, ar->hw_params.led_pin, 1); ++ ++ return 0; ++} ++ ++int ath10k_leds_register(struct ath10k *ar) ++{ ++ int ret; ++ ++ if (ar->hw_params.led_pin == 0) ++ /* leds not supported */ ++ return 0; ++ ++ snprintf(ar->leds.label, sizeof(ar->leds.label), "ath10k-%s", ++ wiphy_name(ar->hw->wiphy)); ++ ar->leds.wifi_led.active_low = 1; ++ ar->leds.wifi_led.gpio = ar->hw_params.led_pin; ++ ar->leds.wifi_led.name = ar->leds.label; ++ ar->leds.wifi_led.default_state = LEDS_GPIO_DEFSTATE_KEEP; ++ ++ ar->leds.cdev.name = ar->leds.label; ++ ar->leds.cdev.brightness_set_blocking = ath10k_leds_set_brightness_blocking; ++ ar->leds.cdev.default_trigger = ar->leds.wifi_led.default_trigger; ++ ++ ret = led_classdev_register(wiphy_dev(ar->hw->wiphy), &ar->leds.cdev); ++ if (ret) ++ return ret; ++ ++ return 0; ++} ++ ++void ath10k_leds_unregister(struct ath10k *ar) ++{ ++ if (ar->hw_params.led_pin == 0) ++ /* leds not supported */ ++ return; ++ ++ led_classdev_unregister(&ar->leds.cdev); ++} ++ +diff --git a/drivers/net/wireless/ath/ath10k/leds.h b/drivers/net/wireless/ath/ath10k/leds.h +new file mode 100644 +index 000000000000..56325b0875e5 +--- /dev/null ++++ b/drivers/net/wireless/ath/ath10k/leds.h +@@ -0,0 +1,34 @@ ++/* SPDX-License-Identifier: ISC */ ++/* ++ * Copyright (c) 2005-2011 Atheros Communications Inc. ++ * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. ++ * Copyright (c) 2018 Sebastian Gottschall ++ * Copyright (c) 2018 The Linux Foundation. All rights reserved. ++ */ ++ ++#ifndef _LEDS_H_ ++#define _LEDS_H_ ++ ++#include "core.h" ++ ++#ifdef CONFIG_ATH10K_LEDS ++void ath10k_leds_unregister(struct ath10k *ar); ++int ath10k_leds_start(struct ath10k *ar); ++int ath10k_leds_register(struct ath10k *ar); ++#else ++static inline void ath10k_leds_unregister(struct ath10k *ar) ++{ ++} ++ ++static inline int ath10k_leds_start(struct ath10k *ar) ++{ ++ return 0; ++} ++ ++static inline int ath10k_leds_register(struct ath10k *ar) ++{ ++ return 0; ++} ++ ++#endif ++#endif /* _LEDS_H_ */ +diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c +index e322b528baaf..3bf67b2ecd6d 100644 +--- a/drivers/net/wireless/ath/ath10k/mac.c ++++ b/drivers/net/wireless/ath/ath10k/mac.c +@@ -25,6 +25,7 @@ + #include "wmi-tlv.h" + #include "wmi-ops.h" + #include "wow.h" ++#include "leds.h" + + /*********/ + /* Rates */ +diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h +index aa57d807491c..f3f6b5954b27 100644 +--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h ++++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h +@@ -226,7 +226,10 @@ struct wmi_ops { + const struct wmi_bb_timing_cfg_arg *arg); + struct sk_buff *(*gen_per_peer_per_tid_cfg)(struct ath10k *ar, + const struct wmi_per_peer_per_tid_cfg_arg *arg); ++ struct sk_buff *(*gen_gpio_config)(struct ath10k *ar, u32 gpio_num, ++ u32 input, u32 pull_type, u32 intr_mode); + ++ struct sk_buff *(*gen_gpio_output)(struct ath10k *ar, u32 gpio_num, u32 set); + }; + + int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); +@@ -1122,6 +1125,35 @@ ath10k_wmi_force_fw_hang(struct ath10k *ar, + return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->force_fw_hang_cmdid); + } + ++static inline int ath10k_wmi_gpio_config(struct ath10k *ar, u32 gpio_num, ++ u32 input, u32 pull_type, u32 intr_mode) ++{ ++ struct sk_buff *skb; ++ ++ if (!ar->wmi.ops->gen_gpio_config) ++ return -EOPNOTSUPP; ++ ++ skb = ar->wmi.ops->gen_gpio_config(ar, gpio_num, input, pull_type, intr_mode); ++ if (IS_ERR(skb)) ++ return PTR_ERR(skb); ++ ++ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->gpio_config_cmdid); ++} ++ ++static inline int ath10k_wmi_gpio_output(struct ath10k *ar, u32 gpio_num, u32 set) ++{ ++ struct sk_buff *skb; ++ ++ if (!ar->wmi.ops->gen_gpio_config) ++ return -EOPNOTSUPP; ++ ++ skb = ar->wmi.ops->gen_gpio_output(ar, gpio_num, set); ++ if (IS_ERR(skb)) ++ return PTR_ERR(skb); ++ ++ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->gpio_output_cmdid); ++} ++ + static inline int + ath10k_wmi_dbglog_cfg(struct ath10k *ar, u64 module_enable, u32 log_level) + { +diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c +index aed97fd121ba..dbaf26d6a7a6 100644 +--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c ++++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c +@@ -4606,6 +4606,8 @@ static const struct wmi_ops wmi_tlv_ops = { + .gen_echo = ath10k_wmi_tlv_op_gen_echo, + .gen_vdev_spectral_conf = ath10k_wmi_tlv_op_gen_vdev_spectral_conf, + .gen_vdev_spectral_enable = ath10k_wmi_tlv_op_gen_vdev_spectral_enable, ++ /* .gen_gpio_config not implemented */ ++ /* .gen_gpio_output not implemented */ + }; + + static const struct wmi_peer_flags_map wmi_tlv_peer_flags_map = { +diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c +index 80d255aaff1b..fe2344598364 100644 +--- a/drivers/net/wireless/ath/ath10k/wmi.c ++++ b/drivers/net/wireless/ath/ath10k/wmi.c +@@ -7493,6 +7493,49 @@ ath10k_wmi_op_gen_peer_set_param(struct ath10k *ar, u32 vdev_id, + return skb; + } + ++static struct sk_buff *ath10k_wmi_op_gen_gpio_config(struct ath10k *ar, ++ u32 gpio_num, u32 input, ++ u32 pull_type, u32 intr_mode) ++{ ++ struct wmi_gpio_config_cmd *cmd; ++ struct sk_buff *skb; ++ ++ skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd)); ++ if (!skb) ++ return ERR_PTR(-ENOMEM); ++ ++ cmd = (struct wmi_gpio_config_cmd *)skb->data; ++ cmd->pull_type = __cpu_to_le32(pull_type); ++ cmd->gpio_num = __cpu_to_le32(gpio_num); ++ cmd->input = __cpu_to_le32(input); ++ cmd->intr_mode = __cpu_to_le32(intr_mode); ++ ++ ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi gpio_config gpio_num 0x%08x input 0x%08x pull_type 0x%08x intr_mode 0x%08x\n", ++ gpio_num, input, pull_type, intr_mode); ++ ++ return skb; ++} ++ ++static struct sk_buff *ath10k_wmi_op_gen_gpio_output(struct ath10k *ar, ++ u32 gpio_num, u32 set) ++{ ++ struct wmi_gpio_output_cmd *cmd; ++ struct sk_buff *skb; ++ ++ skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd)); ++ if (!skb) ++ return ERR_PTR(-ENOMEM); ++ ++ cmd = (struct wmi_gpio_output_cmd *)skb->data; ++ cmd->gpio_num = __cpu_to_le32(gpio_num); ++ cmd->set = __cpu_to_le32(set); ++ ++ ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi gpio_output gpio_num 0x%08x set 0x%08x\n", ++ gpio_num, set); ++ ++ return skb; ++} ++ + static struct sk_buff * + ath10k_wmi_op_gen_set_psmode(struct ath10k *ar, u32 vdev_id, + enum wmi_sta_ps_mode psmode) +@@ -9157,6 +9200,9 @@ static const struct wmi_ops wmi_ops = { + .fw_stats_fill = ath10k_wmi_main_op_fw_stats_fill, + .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype, + .gen_echo = ath10k_wmi_op_gen_echo, ++ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config, ++ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output, ++ + /* .gen_bcn_tmpl not implemented */ + /* .gen_prb_tmpl not implemented */ + /* .gen_p2p_go_bcn_ie not implemented */ +@@ -9227,6 +9273,8 @@ static const struct wmi_ops wmi_10_1_ops = { + .fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill, + .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype, + .gen_echo = ath10k_wmi_op_gen_echo, ++ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config, ++ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output, + /* .gen_bcn_tmpl not implemented */ + /* .gen_prb_tmpl not implemented */ + /* .gen_p2p_go_bcn_ie not implemented */ +@@ -9299,6 +9347,8 @@ static const struct wmi_ops wmi_10_2_ops = { + .gen_delba_send = ath10k_wmi_op_gen_delba_send, + .fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill, + .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype, ++ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config, ++ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output, + /* .gen_pdev_enable_adaptive_cca not implemented */ + }; + +@@ -9370,6 +9420,8 @@ static const struct wmi_ops wmi_10_2_4_ops = { + ath10k_wmi_op_gen_pdev_enable_adaptive_cca, + .get_vdev_subtype = ath10k_wmi_10_2_4_op_get_vdev_subtype, + .gen_bb_timing = ath10k_wmi_10_2_4_op_gen_bb_timing, ++ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config, ++ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output, + /* .gen_bcn_tmpl not implemented */ + /* .gen_prb_tmpl not implemented */ + /* .gen_p2p_go_bcn_ie not implemented */ +@@ -9451,6 +9503,8 @@ static const struct wmi_ops wmi_10_4_ops = { + .gen_pdev_bss_chan_info_req = ath10k_wmi_10_2_op_gen_pdev_bss_chan_info, + .gen_echo = ath10k_wmi_op_gen_echo, + .gen_pdev_get_tpc_config = ath10k_wmi_10_2_4_op_gen_pdev_get_tpc_config, ++ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config, ++ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output, + }; + + int ath10k_wmi_attach(struct ath10k *ar) +diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h +index 2379501225a4..0faefc0a9a40 100644 +--- a/drivers/net/wireless/ath/ath10k/wmi.h ++++ b/drivers/net/wireless/ath/ath10k/wmi.h +@@ -3034,6 +3034,41 @@ enum wmi_10_4_feature_mask { + + }; + ++/* WMI_GPIO_CONFIG_CMDID */ ++enum { ++ WMI_GPIO_PULL_NONE, ++ WMI_GPIO_PULL_UP, ++ WMI_GPIO_PULL_DOWN, ++}; ++ ++enum { ++ WMI_GPIO_INTTYPE_DISABLE, ++ WMI_GPIO_INTTYPE_RISING_EDGE, ++ WMI_GPIO_INTTYPE_FALLING_EDGE, ++ WMI_GPIO_INTTYPE_BOTH_EDGE, ++ WMI_GPIO_INTTYPE_LEVEL_LOW, ++ WMI_GPIO_INTTYPE_LEVEL_HIGH ++}; ++ ++/* WMI_GPIO_CONFIG_CMDID */ ++struct wmi_gpio_config_cmd { ++ __le32 gpio_num; /* GPIO number to be setup */ ++ __le32 input; /* 0 - Output/ 1 - Input */ ++ __le32 pull_type; /* Pull type defined above */ ++ __le32 intr_mode; /* Interrupt mode defined above (Input) */ ++} __packed; ++ ++/* WMI_GPIO_OUTPUT_CMDID */ ++struct wmi_gpio_output_cmd { ++ __le32 gpio_num; /* GPIO number to be setup */ ++ __le32 set; /* Set the GPIO pin*/ ++} __packed; ++ ++/* WMI_GPIO_INPUT_EVENTID */ ++struct wmi_gpio_input_event { ++ __le32 gpio_num; /* GPIO number which changed state */ ++} __packed; ++ + struct wmi_ext_resource_config_10_4_cmd { + /* contains enum wmi_host_platform_type */ + __le32 host_platform_config; +-- +2.43.0 + diff --git a/package/kernel/mac80211/patches/ath10k/974-ath10k_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch b/package/kernel/mac80211/patches/ath10k/974-ath10k_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch deleted file mode 100644 index 2465470a57..0000000000 --- a/package/kernel/mac80211/patches/ath10k/974-ath10k_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch +++ /dev/null @@ -1,609 +0,0 @@ -From: Sebastian Gottschall - -Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984 based -chipsets with on chipset connected led's using WMI Firmware API. The LED -device will get available named as "ath10k-phyX" at sysfs and can be controlled -with various triggers. adds also debugfs interface for gpio control. - -This patch is specific for OpenWRt base, as is use old backported package -with old wireless source. Support for QCA9984 is removed and a simbol -is added to local-simbol file to export the actually compile the code -with the ATH10K_LEDS simbol. - - -Signed-off-by: Sebastian Gottschall -Reviewed-by: Steve deRosier -[kvalo: major reorg and cleanup] -Signed-off-by: Kalle Valo -Signed-off-by: Ansuel Smith ---- - -v13: - -* only compile tested! - -* fix all checkpatch warnings - -* fix commit log - -* sizeof(struct ath10k_gpiocontrol) -> sizeof(*gpio) - -* unsigned -> unsigned int - -* remove GPIOLIB code, that should be added in a separate patch - -* rename gpio.c to leds.c - -* add leds.h - -* rename some functions: - - ath10k_attach_led() -> ath10k_leds_register() - ath10k_unregister_led() -> ath10k_leds_unregister() - ath10k_reset_led_pin() -> ath10k_leds_start() - -* call ath10k_leds_unregister() before ath10k_thermal_unregister() to preserve ordering - -* call ath10k_leds_start() only from ath10k_core_start() and not from mac.c - -* rename struct ath10k_gpiocontrol as anonymous function under struct - ath10k::leds, no need for memory allocation - -* merge ath10k_add_led() to ath10k_attach_led(), which is it's only caller - -* remove #if IS_ENABLED() checks from most of places, memory savings from those were not worth it - -* Kconfig help text improvement and move it lower in the menu, also don't enable it by default - -* switch to set_brightness_blocking() so that the callback can sleep, - then no need to use ath10k_wmi_cmd_send_nowait() and can take mutex - to access ar->state - -* don't touch ath10k_wmi_pdev_get_temperature() - -* as QCA6174/QCA9377 are not (yet) supported don't add the command to WMI-TLV interface - -* remove debugfs interface, that should be added in another patch - -* cleanup includes - - - drivers/net/wireless/ath/ath10k/Kconfig | 10 +++ - drivers/net/wireless/ath/ath10k/Makefile | 1 + - drivers/net/wireless/ath/ath10k/core.c | 22 +++++++ - drivers/net/wireless/ath/ath10k/core.h | 9 ++- - drivers/net/wireless/ath/ath10k/hw.h | 1 + - drivers/net/wireless/ath/ath10k/leds.c | 103 ++++++++++++++++++++++++++++++ - drivers/net/wireless/ath/ath10k/leds.h | 45 +++++++++++++ - drivers/net/wireless/ath/ath10k/mac.c | 1 + - drivers/net/wireless/ath/ath10k/wmi-ops.h | 32 ++++++++++ - drivers/net/wireless/ath/ath10k/wmi-tlv.c | 2 + - drivers/net/wireless/ath/ath10k/wmi.c | 54 ++++++++++++++++ - drivers/net/wireless/ath/ath10k/wmi.h | 35 ++++++++++ - 12 files changed, 314 insertions(+), 1 deletion(-) - create mode 100644 drivers/net/wireless/ath/ath10k/leds.c - create mode 100644 drivers/net/wireless/ath/ath10k/leds.h ---- a/drivers/net/wireless/ath/ath10k/Kconfig -+++ b/drivers/net/wireless/ath/ath10k/Kconfig -@@ -72,6 +72,16 @@ config ATH10K_DEBUGFS - - If unsure, say Y to make it easier to debug problems. - -+config ATH10K_LEDS -+ bool "Atheros ath10k LED support" -+ depends on ATH10K -+ select MAC80211_LEDS -+ select LEDS_CLASS -+ select NEW_LEDS -+ default y -+ ---help--- -+ This option is necessary, if you want LED support for chipset connected led pins. If unsure, say N. -+ - config ATH10K_SPECTRAL - bool "Atheros ath10k spectral scan support" - depends on ATH10K_DEBUGFS ---- a/drivers/net/wireless/ath/ath10k/Makefile -+++ b/drivers/net/wireless/ath/ath10k/Makefile -@@ -19,6 +19,7 @@ ath10k_core-$(CPTCFG_ATH10K_SPECTRAL) += - ath10k_core-$(CPTCFG_NL80211_TESTMODE) += testmode.o - ath10k_core-$(CPTCFG_ATH10K_TRACING) += trace.o - ath10k_core-$(CPTCFG_ATH10K_THERMAL) += thermal.o -+ath10k_core-$(CPTCFG_ATH10K_LEDS) += leds.o - ath10k_core-$(CPTCFG_MAC80211_DEBUGFS) += debugfs_sta.o - ath10k_core-$(CONFIG_PM) += wow.o - ath10k_core-$(CONFIG_DEV_COREDUMP) += coredump.o ---- a/local-symbols -+++ b/local-symbols -@@ -161,6 +161,7 @@ ATH10K_DEBUG= - ATH10K_DEBUGFS= - ATH10K_SPECTRAL= - ATH10K_THERMAL= -+ATH10K_LEDS= - ATH10K_TRACING= - ATH10K_DFS_CERTIFIED= - WCN36XX= ---- a/drivers/net/wireless/ath/ath10k/core.c -+++ b/drivers/net/wireless/ath/ath10k/core.c -@@ -26,6 +26,7 @@ - #include "testmode.h" - #include "wmi-ops.h" - #include "coredump.h" -+#include "leds.h" - - unsigned int ath10k_debug_mask; - EXPORT_SYMBOL(ath10k_debug_mask); -@@ -65,6 +66,7 @@ static const struct ath10k_hw_params ath - .dev_id = QCA988X_2_0_DEVICE_ID, - .bus = ATH10K_BUS_PCI, - .name = "qca988x hw2.0", -+ .led_pin = 1, - .patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR, - .uart_pin = 7, - .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL, -@@ -146,6 +148,7 @@ static const struct ath10k_hw_params ath - .dev_id = QCA9887_1_0_DEVICE_ID, - .bus = ATH10K_BUS_PCI, - .name = "qca9887 hw1.0", -+ .led_pin = 1, - .patch_load_addr = QCA9887_HW_1_0_PATCH_LOAD_ADDR, - .uart_pin = 7, - .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL, -@@ -387,6 +390,7 @@ static const struct ath10k_hw_params ath - .dev_id = QCA99X0_2_0_DEVICE_ID, - .bus = ATH10K_BUS_PCI, - .name = "qca99x0 hw2.0", -+ .led_pin = 17, - .patch_load_addr = QCA99X0_HW_2_0_PATCH_LOAD_ADDR, - .uart_pin = 7, - .otp_exe_param = 0x00000700, -@@ -433,6 +437,7 @@ static const struct ath10k_hw_params ath - .dev_id = QCA9984_1_0_DEVICE_ID, - .bus = ATH10K_BUS_PCI, - .name = "qca9984/qca9994 hw1.0", -+ .led_pin = 17, - .patch_load_addr = QCA9984_HW_1_0_PATCH_LOAD_ADDR, - .uart_pin = 7, - .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH, -@@ -486,6 +491,7 @@ static const struct ath10k_hw_params ath - .dev_id = QCA9888_2_0_DEVICE_ID, - .bus = ATH10K_BUS_PCI, - .name = "qca9888 hw2.0", -+ .led_pin = 17, - .patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR, - .uart_pin = 7, - .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH, -@@ -3222,6 +3228,10 @@ int ath10k_core_start(struct ath10k *ar, - goto err_hif_stop; - } - -+ status = ath10k_leds_start(ar); -+ if (status) -+ goto err_hif_stop; -+ - return 0; - - err_hif_stop: -@@ -3480,9 +3490,18 @@ static void ath10k_core_register_work(st - goto err_spectral_destroy; - } - -+ status = ath10k_leds_register(ar); -+ if (status) { -+ ath10k_err(ar, "could not register leds: %d\n", -+ status); -+ goto err_thermal_unregister; -+ } -+ - set_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags); - return; - -+err_thermal_unregister: -+ ath10k_thermal_unregister(ar); - err_spectral_destroy: - ath10k_spectral_destroy(ar); - err_debug_destroy: -@@ -3528,6 +3547,8 @@ void ath10k_core_unregister(struct ath10 - if (!test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags)) - return; - -+ ath10k_leds_unregister(ar); -+ - ath10k_thermal_unregister(ar); - /* Stop spectral before unregistering from mac80211 to remove the - * relayfs debugfs file cleanly. Otherwise the parent debugfs tree ---- a/drivers/net/wireless/ath/ath10k/core.h -+++ b/drivers/net/wireless/ath/ath10k/core.h -@@ -14,6 +14,7 @@ - #include - #include - #include -+#include - - #include "htt.h" - #include "htc.h" -@@ -1256,6 +1257,13 @@ struct ath10k { - } testmode; - - struct { -+ struct gpio_led wifi_led; -+ struct led_classdev cdev; -+ char label[48]; -+ u32 gpio_state_pin; -+ } leds; -+ -+ struct { - /* protected by data_lock */ - u32 rx_crc_err_drop; - u32 fw_crash_counter; ---- a/drivers/net/wireless/ath/ath10k/hw.h -+++ b/drivers/net/wireless/ath/ath10k/hw.h -@@ -519,6 +519,7 @@ struct ath10k_hw_params { - const char *name; - u32 patch_load_addr; - int uart_pin; -+ int led_pin; - u32 otp_exe_param; - - /* Type of hw cycle counter wraparound logic, for more info ---- /dev/null -+++ b/drivers/net/wireless/ath/ath10k/leds.c -@@ -0,0 +1,103 @@ -+/* -+ * Copyright (c) 2005-2011 Atheros Communications Inc. -+ * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. -+ * Copyright (c) 2018 Sebastian Gottschall -+ * Copyright (c) 2018, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for any -+ * purpose with or without fee is hereby granted, provided that the above -+ * copyright notice and this permission notice appear in all copies. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+#include -+ -+#include "core.h" -+#include "wmi.h" -+#include "wmi-ops.h" -+ -+#include "leds.h" -+ -+static int ath10k_leds_set_brightness_blocking(struct led_classdev *led_cdev, -+ enum led_brightness brightness) -+{ -+ struct ath10k *ar = container_of(led_cdev, struct ath10k, -+ leds.cdev); -+ struct gpio_led *led = &ar->leds.wifi_led; -+ -+ mutex_lock(&ar->conf_mutex); -+ -+ if (ar->state != ATH10K_STATE_ON) -+ goto out; -+ -+ ar->leds.gpio_state_pin = (brightness != LED_OFF) ^ led->active_low; -+ ath10k_wmi_gpio_output(ar, led->gpio, ar->leds.gpio_state_pin); -+ -+out: -+ mutex_unlock(&ar->conf_mutex); -+ -+ return 0; -+} -+ -+int ath10k_leds_start(struct ath10k *ar) -+{ -+ if (ar->hw_params.led_pin == 0) -+ /* leds not supported */ -+ return 0; -+ -+ /* under some circumstances, the gpio pin gets reconfigured -+ * to default state by the firmware, so we need to -+ * reconfigure it this behaviour has only ben seen on -+ * QCA9984 and QCA99XX devices so far -+ */ -+ ath10k_wmi_gpio_config(ar, ar->hw_params.led_pin, 0, -+ WMI_GPIO_PULL_NONE, WMI_GPIO_INTTYPE_DISABLE); -+ ath10k_wmi_gpio_output(ar, ar->hw_params.led_pin, 1); -+ -+ return 0; -+} -+ -+int ath10k_leds_register(struct ath10k *ar) -+{ -+ int ret; -+ -+ if (ar->hw_params.led_pin == 0) -+ /* leds not supported */ -+ return 0; -+ -+ snprintf(ar->leds.label, sizeof(ar->leds.label), "ath10k-%s", -+ wiphy_name(ar->hw->wiphy)); -+ ar->leds.wifi_led.active_low = 1; -+ ar->leds.wifi_led.gpio = ar->hw_params.led_pin; -+ ar->leds.wifi_led.name = ar->leds.label; -+ ar->leds.wifi_led.default_state = LEDS_GPIO_DEFSTATE_KEEP; -+ -+ ar->leds.cdev.name = ar->leds.label; -+ ar->leds.cdev.brightness_set_blocking = ath10k_leds_set_brightness_blocking; -+ -+ /* FIXME: this assignment doesn't make sense as it's NULL, remove it? */ -+ ar->leds.cdev.default_trigger = ar->leds.wifi_led.default_trigger; -+ -+ ret = led_classdev_register(wiphy_dev(ar->hw->wiphy), &ar->leds.cdev); -+ if (ret) -+ return ret; -+ -+ return 0; -+} -+ -+void ath10k_leds_unregister(struct ath10k *ar) -+{ -+ if (ar->hw_params.led_pin == 0) -+ /* leds not supported */ -+ return; -+ -+ led_classdev_unregister(&ar->leds.cdev); -+} -+ ---- /dev/null -+++ b/drivers/net/wireless/ath/ath10k/leds.h -@@ -0,0 +1,41 @@ -+/* -+ * Copyright (c) 2018, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for any -+ * purpose with or without fee is hereby granted, provided that the above -+ * copyright notice and this permission notice appear in all copies. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+#ifndef _LEDS_H_ -+#define _LEDS_H_ -+ -+#include "core.h" -+ -+#ifdef CPTCFG_ATH10K_LEDS -+void ath10k_leds_unregister(struct ath10k *ar); -+int ath10k_leds_start(struct ath10k *ar); -+int ath10k_leds_register(struct ath10k *ar); -+#else -+static inline void ath10k_leds_unregister(struct ath10k *ar) -+{ -+} -+ -+static inline int ath10k_leds_start(struct ath10k *ar) -+{ -+ return 0; -+} -+ -+static inline int ath10k_leds_register(struct ath10k *ar) -+{ -+ return 0; -+} -+ -+#endif -+#endif /* _LEDS_H_ */ ---- a/drivers/net/wireless/ath/ath10k/mac.c -+++ b/drivers/net/wireless/ath/ath10k/mac.c -@@ -24,6 +24,7 @@ - #include "wmi-tlv.h" - #include "wmi-ops.h" - #include "wow.h" -+#include "leds.h" - - /*********/ - /* Rates */ ---- a/drivers/net/wireless/ath/ath10k/wmi-ops.h -+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h -@@ -226,7 +226,10 @@ struct wmi_ops { - const struct wmi_bb_timing_cfg_arg *arg); - struct sk_buff *(*gen_per_peer_per_tid_cfg)(struct ath10k *ar, - const struct wmi_per_peer_per_tid_cfg_arg *arg); -+ struct sk_buff *(*gen_gpio_config)(struct ath10k *ar, u32 gpio_num, -+ u32 input, u32 pull_type, u32 intr_mode); - -+ struct sk_buff *(*gen_gpio_output)(struct ath10k *ar, u32 gpio_num, u32 set); - }; - - int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); -@@ -1122,6 +1125,35 @@ ath10k_wmi_force_fw_hang(struct ath10k * - return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->force_fw_hang_cmdid); - } - -+static inline int ath10k_wmi_gpio_config(struct ath10k *ar, u32 gpio_num, -+ u32 input, u32 pull_type, u32 intr_mode) -+{ -+ struct sk_buff *skb; -+ -+ if (!ar->wmi.ops->gen_gpio_config) -+ return -EOPNOTSUPP; -+ -+ skb = ar->wmi.ops->gen_gpio_config(ar, gpio_num, input, pull_type, intr_mode); -+ if (IS_ERR(skb)) -+ return PTR_ERR(skb); -+ -+ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->gpio_config_cmdid); -+} -+ -+static inline int ath10k_wmi_gpio_output(struct ath10k *ar, u32 gpio_num, u32 set) -+{ -+ struct sk_buff *skb; -+ -+ if (!ar->wmi.ops->gen_gpio_config) -+ return -EOPNOTSUPP; -+ -+ skb = ar->wmi.ops->gen_gpio_output(ar, gpio_num, set); -+ if (IS_ERR(skb)) -+ return PTR_ERR(skb); -+ -+ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->gpio_output_cmdid); -+} -+ - static inline int - ath10k_wmi_dbglog_cfg(struct ath10k *ar, u64 module_enable, u32 log_level) - { ---- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c -+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c -@@ -4601,6 +4601,8 @@ static const struct wmi_ops wmi_tlv_ops - .gen_echo = ath10k_wmi_tlv_op_gen_echo, - .gen_vdev_spectral_conf = ath10k_wmi_tlv_op_gen_vdev_spectral_conf, - .gen_vdev_spectral_enable = ath10k_wmi_tlv_op_gen_vdev_spectral_enable, -+ /* .gen_gpio_config not implemented */ -+ /* .gen_gpio_output not implemented */ - }; - - static const struct wmi_peer_flags_map wmi_tlv_peer_flags_map = { ---- a/drivers/net/wireless/ath/ath10k/wmi.c -+++ b/drivers/net/wireless/ath/ath10k/wmi.c -@@ -7472,6 +7472,49 @@ ath10k_wmi_op_gen_peer_set_param(struct - return skb; - } - -+static struct sk_buff *ath10k_wmi_op_gen_gpio_config(struct ath10k *ar, -+ u32 gpio_num, u32 input, -+ u32 pull_type, u32 intr_mode) -+{ -+ struct wmi_gpio_config_cmd *cmd; -+ struct sk_buff *skb; -+ -+ skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd)); -+ if (!skb) -+ return ERR_PTR(-ENOMEM); -+ -+ cmd = (struct wmi_gpio_config_cmd *)skb->data; -+ cmd->pull_type = __cpu_to_le32(pull_type); -+ cmd->gpio_num = __cpu_to_le32(gpio_num); -+ cmd->input = __cpu_to_le32(input); -+ cmd->intr_mode = __cpu_to_le32(intr_mode); -+ -+ ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi gpio_config gpio_num 0x%08x input 0x%08x pull_type 0x%08x intr_mode 0x%08x\n", -+ gpio_num, input, pull_type, intr_mode); -+ -+ return skb; -+} -+ -+static struct sk_buff *ath10k_wmi_op_gen_gpio_output(struct ath10k *ar, -+ u32 gpio_num, u32 set) -+{ -+ struct wmi_gpio_output_cmd *cmd; -+ struct sk_buff *skb; -+ -+ skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd)); -+ if (!skb) -+ return ERR_PTR(-ENOMEM); -+ -+ cmd = (struct wmi_gpio_output_cmd *)skb->data; -+ cmd->gpio_num = __cpu_to_le32(gpio_num); -+ cmd->set = __cpu_to_le32(set); -+ -+ ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi gpio_output gpio_num 0x%08x set 0x%08x\n", -+ gpio_num, set); -+ -+ return skb; -+} -+ - static struct sk_buff * - ath10k_wmi_op_gen_set_psmode(struct ath10k *ar, u32 vdev_id, - enum wmi_sta_ps_mode psmode) -@@ -9138,6 +9181,9 @@ static const struct wmi_ops wmi_ops = { - .fw_stats_fill = ath10k_wmi_main_op_fw_stats_fill, - .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype, - .gen_echo = ath10k_wmi_op_gen_echo, -+ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config, -+ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output, -+ - /* .gen_bcn_tmpl not implemented */ - /* .gen_prb_tmpl not implemented */ - /* .gen_p2p_go_bcn_ie not implemented */ -@@ -9208,6 +9254,8 @@ static const struct wmi_ops wmi_10_1_ops - .fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill, - .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype, - .gen_echo = ath10k_wmi_op_gen_echo, -+ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config, -+ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output, - /* .gen_bcn_tmpl not implemented */ - /* .gen_prb_tmpl not implemented */ - /* .gen_p2p_go_bcn_ie not implemented */ -@@ -9280,6 +9328,8 @@ static const struct wmi_ops wmi_10_2_ops - .gen_delba_send = ath10k_wmi_op_gen_delba_send, - .fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill, - .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype, -+ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config, -+ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output, - /* .gen_pdev_enable_adaptive_cca not implemented */ - }; - -@@ -9351,6 +9401,8 @@ static const struct wmi_ops wmi_10_2_4_o - ath10k_wmi_op_gen_pdev_enable_adaptive_cca, - .get_vdev_subtype = ath10k_wmi_10_2_4_op_get_vdev_subtype, - .gen_bb_timing = ath10k_wmi_10_2_4_op_gen_bb_timing, -+ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config, -+ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output, - /* .gen_bcn_tmpl not implemented */ - /* .gen_prb_tmpl not implemented */ - /* .gen_p2p_go_bcn_ie not implemented */ -@@ -9432,6 +9484,8 @@ static const struct wmi_ops wmi_10_4_ops - .gen_pdev_bss_chan_info_req = ath10k_wmi_10_2_op_gen_pdev_bss_chan_info, - .gen_echo = ath10k_wmi_op_gen_echo, - .gen_pdev_get_tpc_config = ath10k_wmi_10_2_4_op_gen_pdev_get_tpc_config, -+ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config, -+ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output, - }; - - int ath10k_wmi_attach(struct ath10k *ar) ---- a/drivers/net/wireless/ath/ath10k/wmi.h -+++ b/drivers/net/wireless/ath/ath10k/wmi.h -@@ -3030,6 +3030,41 @@ enum wmi_10_4_feature_mask { - - }; - -+/* WMI_GPIO_CONFIG_CMDID */ -+enum { -+ WMI_GPIO_PULL_NONE, -+ WMI_GPIO_PULL_UP, -+ WMI_GPIO_PULL_DOWN, -+}; -+ -+enum { -+ WMI_GPIO_INTTYPE_DISABLE, -+ WMI_GPIO_INTTYPE_RISING_EDGE, -+ WMI_GPIO_INTTYPE_FALLING_EDGE, -+ WMI_GPIO_INTTYPE_BOTH_EDGE, -+ WMI_GPIO_INTTYPE_LEVEL_LOW, -+ WMI_GPIO_INTTYPE_LEVEL_HIGH -+}; -+ -+/* WMI_GPIO_CONFIG_CMDID */ -+struct wmi_gpio_config_cmd { -+ __le32 gpio_num; /* GPIO number to be setup */ -+ __le32 input; /* 0 - Output/ 1 - Input */ -+ __le32 pull_type; /* Pull type defined above */ -+ __le32 intr_mode; /* Interrupt mode defined above (Input) */ -+} __packed; -+ -+/* WMI_GPIO_OUTPUT_CMDID */ -+struct wmi_gpio_output_cmd { -+ __le32 gpio_num; /* GPIO number to be setup */ -+ __le32 set; /* Set the GPIO pin*/ -+} __packed; -+ -+/* WMI_GPIO_INPUT_EVENTID */ -+struct wmi_gpio_input_event { -+ __le32 gpio_num; /* GPIO number which changed state */ -+} __packed; -+ - struct wmi_ext_resource_config_10_4_cmd { - /* contains enum wmi_host_platform_type */ - __le32 host_platform_config; diff --git a/package/kernel/mac80211/patches/ath10k/974-wifi-ath10k-add-LED-and-GPIO-controlling-support-for.patch b/package/kernel/mac80211/patches/ath10k/974-wifi-ath10k-add-LED-and-GPIO-controlling-support-for.patch new file mode 100644 index 0000000000..05e3b2a28d --- /dev/null +++ b/package/kernel/mac80211/patches/ath10k/974-wifi-ath10k-add-LED-and-GPIO-controlling-support-for.patch @@ -0,0 +1,626 @@ +From 8e1debd82466a3fe711784ab37e6b54e56011267 Mon Sep 17 00:00:00 2001 +From: Sebastian Gottschall +Date: Mon, 13 May 2024 17:22:25 +0300 +Subject: [PATCH] wifi: ath10k: add LED and GPIO controlling support for + various chipsets + +Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984 +based chipsets with on chipset connected led's using WMI Firmware API. +The LED device will get available named as "ath10k-phyX" at sysfs and +can be controlled with various triggers. +Adds also debugfs interface for gpio control. + +Signed-off-by: Sebastian Gottschall +Reviewed-by: Steve deRosier +[kvalo: major reorg and cleanup] +Signed-off-by: Kalle Valo +[ansuel: rebase and small cleanup] +Signed-off-by: Christian Marangi +Tested-by: Stefan Lippers-Hollmann +Signed-off-by: Kalle Valo +Link: https://msgid.link/20230611080505.17393-1-ansuelsmth@gmail.com +--- + drivers/net/wireless/ath/ath10k/Kconfig | 6 ++ + drivers/net/wireless/ath/ath10k/Makefile | 1 + + drivers/net/wireless/ath/ath10k/core.c | 32 ++++++++ + drivers/net/wireless/ath/ath10k/core.h | 8 ++ + drivers/net/wireless/ath/ath10k/hw.h | 1 + + drivers/net/wireless/ath/ath10k/leds.c | 90 +++++++++++++++++++++++ + drivers/net/wireless/ath/ath10k/leds.h | 34 +++++++++ + drivers/net/wireless/ath/ath10k/mac.c | 1 + + drivers/net/wireless/ath/ath10k/wmi-ops.h | 32 ++++++++ + drivers/net/wireless/ath/ath10k/wmi-tlv.c | 2 + + drivers/net/wireless/ath/ath10k/wmi.c | 54 ++++++++++++++ + drivers/net/wireless/ath/ath10k/wmi.h | 35 +++++++++ + 12 files changed, 296 insertions(+) + create mode 100644 drivers/net/wireless/ath/ath10k/leds.c + create mode 100644 drivers/net/wireless/ath/ath10k/leds.h + +--- a/drivers/net/wireless/ath/ath10k/Kconfig ++++ b/drivers/net/wireless/ath/ath10k/Kconfig +@@ -72,6 +72,12 @@ config ATH10K_DEBUGFS + + If unsure, say Y to make it easier to debug problems. + ++config ATH10K_LEDS ++ bool ++ depends on ATH10K ++ depends on LEDS_CLASS=y || LEDS_CLASS=MAC80211 ++ default y ++ + config ATH10K_SPECTRAL + bool "Atheros ath10k spectral scan support" + depends on ATH10K_DEBUGFS +--- a/drivers/net/wireless/ath/ath10k/Makefile ++++ b/drivers/net/wireless/ath/ath10k/Makefile +@@ -19,6 +19,7 @@ ath10k_core-$(CPTCFG_ATH10K_SPECTRAL) += + ath10k_core-$(CPTCFG_NL80211_TESTMODE) += testmode.o + ath10k_core-$(CPTCFG_ATH10K_TRACING) += trace.o + ath10k_core-$(CPTCFG_ATH10K_THERMAL) += thermal.o ++ath10k_core-$(CPTCFG_ATH10K_LEDS) += leds.o + ath10k_core-$(CPTCFG_MAC80211_DEBUGFS) += debugfs_sta.o + ath10k_core-$(CONFIG_PM) += wow.o + ath10k_core-$(CONFIG_DEV_COREDUMP) += coredump.o +--- a/local-symbols ++++ b/local-symbols +@@ -161,6 +161,7 @@ ATH10K_DEBUG= + ATH10K_DEBUGFS= + ATH10K_SPECTRAL= + ATH10K_THERMAL= ++ATH10K_LEDS= + ATH10K_TRACING= + ATH10K_DFS_CERTIFIED= + WCN36XX= +--- a/drivers/net/wireless/ath/ath10k/core.c ++++ b/drivers/net/wireless/ath/ath10k/core.c +@@ -26,6 +26,7 @@ + #include "testmode.h" + #include "wmi-ops.h" + #include "coredump.h" ++#include "leds.h" + + unsigned int ath10k_debug_mask; + EXPORT_SYMBOL(ath10k_debug_mask); +@@ -67,6 +68,7 @@ static const struct ath10k_hw_params ath + .name = "qca988x hw2.0", + .patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR, + .uart_pin = 7, ++ .led_pin = 1, + .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, +@@ -107,6 +109,7 @@ static const struct ath10k_hw_params ath + .name = "qca988x hw2.0 ubiquiti", + .patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR, + .uart_pin = 7, ++ .led_pin = 0, + .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, +@@ -148,6 +151,7 @@ static const struct ath10k_hw_params ath + .name = "qca9887 hw1.0", + .patch_load_addr = QCA9887_HW_1_0_PATCH_LOAD_ADDR, + .uart_pin = 7, ++ .led_pin = 1, + .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, +@@ -189,6 +193,7 @@ static const struct ath10k_hw_params ath + .name = "qca6174 hw3.2 sdio", + .patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR, + .uart_pin = 19, ++ .led_pin = 0, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, +@@ -225,6 +230,7 @@ static const struct ath10k_hw_params ath + .name = "qca6164 hw2.1", + .patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR, + .uart_pin = 6, ++ .led_pin = 0, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, +@@ -265,6 +271,7 @@ static const struct ath10k_hw_params ath + .name = "qca6174 hw2.1", + .patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR, + .uart_pin = 6, ++ .led_pin = 0, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, +@@ -305,6 +312,7 @@ static const struct ath10k_hw_params ath + .name = "qca6174 hw3.0", + .patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR, + .uart_pin = 6, ++ .led_pin = 0, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, +@@ -345,6 +353,7 @@ static const struct ath10k_hw_params ath + .name = "qca6174 hw3.2", + .patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR, + .uart_pin = 6, ++ .led_pin = 0, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, +@@ -389,6 +398,7 @@ static const struct ath10k_hw_params ath + .name = "qca99x0 hw2.0", + .patch_load_addr = QCA99X0_HW_2_0_PATCH_LOAD_ADDR, + .uart_pin = 7, ++ .led_pin = 17, + .otp_exe_param = 0x00000700, + .continuous_frag_desc = true, + .cck_rate_map_rev2 = true, +@@ -435,6 +445,7 @@ static const struct ath10k_hw_params ath + .name = "qca9984/qca9994 hw1.0", + .patch_load_addr = QCA9984_HW_1_0_PATCH_LOAD_ADDR, + .uart_pin = 7, ++ .led_pin = 17, + .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH, + .otp_exe_param = 0x00000700, + .continuous_frag_desc = true, +@@ -488,6 +499,7 @@ static const struct ath10k_hw_params ath + .name = "qca9888 hw2.0", + .patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR, + .uart_pin = 7, ++ .led_pin = 17, + .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH, + .otp_exe_param = 0x00000700, + .continuous_frag_desc = true, +@@ -538,6 +550,7 @@ static const struct ath10k_hw_params ath + .name = "qca9377 hw1.0", + .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR, + .uart_pin = 6, ++ .led_pin = 0, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, +@@ -578,6 +591,7 @@ static const struct ath10k_hw_params ath + .name = "qca9377 hw1.1", + .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR, + .uart_pin = 6, ++ .led_pin = 0, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, +@@ -620,6 +634,7 @@ static const struct ath10k_hw_params ath + .name = "qca9377 hw1.1 sdio", + .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR, + .uart_pin = 19, ++ .led_pin = 0, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, +@@ -653,6 +668,7 @@ static const struct ath10k_hw_params ath + .name = "qca4019 hw1.0", + .patch_load_addr = QCA4019_HW_1_0_PATCH_LOAD_ADDR, + .uart_pin = 7, ++ .led_pin = 0, + .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH, + .otp_exe_param = 0x0010000, + .continuous_frag_desc = true, +@@ -698,6 +714,7 @@ static const struct ath10k_hw_params ath + .dev_id = 0, + .bus = ATH10K_BUS_SNOC, + .name = "wcn3990 hw1.0", ++ .led_pin = 0, + .continuous_frag_desc = true, + .tx_chain_mask = 0x7, + .rx_chain_mask = 0x7, +@@ -3222,6 +3239,10 @@ int ath10k_core_start(struct ath10k *ar, + goto err_hif_stop; + } + ++ status = ath10k_leds_start(ar); ++ if (status) ++ goto err_hif_stop; ++ + return 0; + + err_hif_stop: +@@ -3480,9 +3501,18 @@ static void ath10k_core_register_work(st + goto err_spectral_destroy; + } + ++ status = ath10k_leds_register(ar); ++ if (status) { ++ ath10k_err(ar, "could not register leds: %d\n", ++ status); ++ goto err_thermal_unregister; ++ } ++ + set_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags); + return; + ++err_thermal_unregister: ++ ath10k_thermal_unregister(ar); + err_spectral_destroy: + ath10k_spectral_destroy(ar); + err_debug_destroy: +@@ -3528,6 +3558,8 @@ void ath10k_core_unregister(struct ath10 + if (!test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags)) + return; + ++ ath10k_leds_unregister(ar); ++ + ath10k_thermal_unregister(ar); + /* Stop spectral before unregistering from mac80211 to remove the + * relayfs debugfs file cleanly. Otherwise the parent debugfs tree +--- a/drivers/net/wireless/ath/ath10k/core.h ++++ b/drivers/net/wireless/ath/ath10k/core.h +@@ -14,6 +14,7 @@ + #include + #include + #include ++#include + + #include "htt.h" + #include "htc.h" +@@ -1256,6 +1257,13 @@ struct ath10k { + } testmode; + + struct { ++ struct gpio_led wifi_led; ++ struct led_classdev cdev; ++ char label[48]; ++ u32 gpio_state_pin; ++ } leds; ++ ++ struct { + /* protected by data_lock */ + u32 rx_crc_err_drop; + u32 fw_crash_counter; +--- a/drivers/net/wireless/ath/ath10k/hw.h ++++ b/drivers/net/wireless/ath/ath10k/hw.h +@@ -519,6 +519,7 @@ struct ath10k_hw_params { + const char *name; + u32 patch_load_addr; + int uart_pin; ++ int led_pin; + u32 otp_exe_param; + + /* Type of hw cycle counter wraparound logic, for more info +--- /dev/null ++++ b/drivers/net/wireless/ath/ath10k/leds.c +@@ -0,0 +1,90 @@ ++// SPDX-License-Identifier: ISC ++/* ++ * Copyright (c) 2005-2011 Atheros Communications Inc. ++ * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. ++ * Copyright (c) 2018 Sebastian Gottschall ++ * Copyright (c) 2018 The Linux Foundation. All rights reserved. ++ */ ++ ++#include ++ ++#include "core.h" ++#include "wmi.h" ++#include "wmi-ops.h" ++ ++#include "leds.h" ++ ++static int ath10k_leds_set_brightness_blocking(struct led_classdev *led_cdev, ++ enum led_brightness brightness) ++{ ++ struct ath10k *ar = container_of(led_cdev, struct ath10k, ++ leds.cdev); ++ struct gpio_led *led = &ar->leds.wifi_led; ++ ++ mutex_lock(&ar->conf_mutex); ++ ++ if (ar->state != ATH10K_STATE_ON) ++ goto out; ++ ++ ar->leds.gpio_state_pin = (brightness != LED_OFF) ^ led->active_low; ++ ath10k_wmi_gpio_output(ar, led->gpio, ar->leds.gpio_state_pin); ++ ++out: ++ mutex_unlock(&ar->conf_mutex); ++ ++ return 0; ++} ++ ++int ath10k_leds_start(struct ath10k *ar) ++{ ++ if (ar->hw_params.led_pin == 0) ++ /* leds not supported */ ++ return 0; ++ ++ /* under some circumstances, the gpio pin gets reconfigured ++ * to default state by the firmware, so we need to ++ * reconfigure it this behaviour has only ben seen on ++ * QCA9984 and QCA99XX devices so far ++ */ ++ ath10k_wmi_gpio_config(ar, ar->hw_params.led_pin, 0, ++ WMI_GPIO_PULL_NONE, WMI_GPIO_INTTYPE_DISABLE); ++ ath10k_wmi_gpio_output(ar, ar->hw_params.led_pin, 1); ++ ++ return 0; ++} ++ ++int ath10k_leds_register(struct ath10k *ar) ++{ ++ int ret; ++ ++ if (ar->hw_params.led_pin == 0) ++ /* leds not supported */ ++ return 0; ++ ++ snprintf(ar->leds.label, sizeof(ar->leds.label), "ath10k-%s", ++ wiphy_name(ar->hw->wiphy)); ++ ar->leds.wifi_led.active_low = 1; ++ ar->leds.wifi_led.gpio = ar->hw_params.led_pin; ++ ar->leds.wifi_led.name = ar->leds.label; ++ ar->leds.wifi_led.default_state = LEDS_GPIO_DEFSTATE_KEEP; ++ ++ ar->leds.cdev.name = ar->leds.label; ++ ar->leds.cdev.brightness_set_blocking = ath10k_leds_set_brightness_blocking; ++ ar->leds.cdev.default_trigger = ar->leds.wifi_led.default_trigger; ++ ++ ret = led_classdev_register(wiphy_dev(ar->hw->wiphy), &ar->leds.cdev); ++ if (ret) ++ return ret; ++ ++ return 0; ++} ++ ++void ath10k_leds_unregister(struct ath10k *ar) ++{ ++ if (ar->hw_params.led_pin == 0) ++ /* leds not supported */ ++ return; ++ ++ led_classdev_unregister(&ar->leds.cdev); ++} ++ +--- /dev/null ++++ b/drivers/net/wireless/ath/ath10k/leds.h +@@ -0,0 +1,34 @@ ++/* SPDX-License-Identifier: ISC */ ++/* ++ * Copyright (c) 2005-2011 Atheros Communications Inc. ++ * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. ++ * Copyright (c) 2018 Sebastian Gottschall ++ * Copyright (c) 2018 The Linux Foundation. All rights reserved. ++ */ ++ ++#ifndef _LEDS_H_ ++#define _LEDS_H_ ++ ++#include "core.h" ++ ++#ifdef CPTCFG_ATH10K_LEDS ++void ath10k_leds_unregister(struct ath10k *ar); ++int ath10k_leds_start(struct ath10k *ar); ++int ath10k_leds_register(struct ath10k *ar); ++#else ++static inline void ath10k_leds_unregister(struct ath10k *ar) ++{ ++} ++ ++static inline int ath10k_leds_start(struct ath10k *ar) ++{ ++ return 0; ++} ++ ++static inline int ath10k_leds_register(struct ath10k *ar) ++{ ++ return 0; ++} ++ ++#endif ++#endif /* _LEDS_H_ */ +--- a/drivers/net/wireless/ath/ath10k/mac.c ++++ b/drivers/net/wireless/ath/ath10k/mac.c +@@ -24,6 +24,7 @@ + #include "wmi-tlv.h" + #include "wmi-ops.h" + #include "wow.h" ++#include "leds.h" + + /*********/ + /* Rates */ +--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h ++++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h +@@ -226,7 +226,10 @@ struct wmi_ops { + const struct wmi_bb_timing_cfg_arg *arg); + struct sk_buff *(*gen_per_peer_per_tid_cfg)(struct ath10k *ar, + const struct wmi_per_peer_per_tid_cfg_arg *arg); ++ struct sk_buff *(*gen_gpio_config)(struct ath10k *ar, u32 gpio_num, ++ u32 input, u32 pull_type, u32 intr_mode); + ++ struct sk_buff *(*gen_gpio_output)(struct ath10k *ar, u32 gpio_num, u32 set); + }; + + int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); +@@ -1122,6 +1125,35 @@ ath10k_wmi_force_fw_hang(struct ath10k * + return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->force_fw_hang_cmdid); + } + ++static inline int ath10k_wmi_gpio_config(struct ath10k *ar, u32 gpio_num, ++ u32 input, u32 pull_type, u32 intr_mode) ++{ ++ struct sk_buff *skb; ++ ++ if (!ar->wmi.ops->gen_gpio_config) ++ return -EOPNOTSUPP; ++ ++ skb = ar->wmi.ops->gen_gpio_config(ar, gpio_num, input, pull_type, intr_mode); ++ if (IS_ERR(skb)) ++ return PTR_ERR(skb); ++ ++ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->gpio_config_cmdid); ++} ++ ++static inline int ath10k_wmi_gpio_output(struct ath10k *ar, u32 gpio_num, u32 set) ++{ ++ struct sk_buff *skb; ++ ++ if (!ar->wmi.ops->gen_gpio_config) ++ return -EOPNOTSUPP; ++ ++ skb = ar->wmi.ops->gen_gpio_output(ar, gpio_num, set); ++ if (IS_ERR(skb)) ++ return PTR_ERR(skb); ++ ++ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->gpio_output_cmdid); ++} ++ + static inline int + ath10k_wmi_dbglog_cfg(struct ath10k *ar, u64 module_enable, u32 log_level) + { +--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c ++++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c +@@ -4601,6 +4601,8 @@ static const struct wmi_ops wmi_tlv_ops + .gen_echo = ath10k_wmi_tlv_op_gen_echo, + .gen_vdev_spectral_conf = ath10k_wmi_tlv_op_gen_vdev_spectral_conf, + .gen_vdev_spectral_enable = ath10k_wmi_tlv_op_gen_vdev_spectral_enable, ++ /* .gen_gpio_config not implemented */ ++ /* .gen_gpio_output not implemented */ + }; + + static const struct wmi_peer_flags_map wmi_tlv_peer_flags_map = { +--- a/drivers/net/wireless/ath/ath10k/wmi.c ++++ b/drivers/net/wireless/ath/ath10k/wmi.c +@@ -7472,6 +7472,49 @@ ath10k_wmi_op_gen_peer_set_param(struct + return skb; + } + ++static struct sk_buff *ath10k_wmi_op_gen_gpio_config(struct ath10k *ar, ++ u32 gpio_num, u32 input, ++ u32 pull_type, u32 intr_mode) ++{ ++ struct wmi_gpio_config_cmd *cmd; ++ struct sk_buff *skb; ++ ++ skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd)); ++ if (!skb) ++ return ERR_PTR(-ENOMEM); ++ ++ cmd = (struct wmi_gpio_config_cmd *)skb->data; ++ cmd->pull_type = __cpu_to_le32(pull_type); ++ cmd->gpio_num = __cpu_to_le32(gpio_num); ++ cmd->input = __cpu_to_le32(input); ++ cmd->intr_mode = __cpu_to_le32(intr_mode); ++ ++ ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi gpio_config gpio_num 0x%08x input 0x%08x pull_type 0x%08x intr_mode 0x%08x\n", ++ gpio_num, input, pull_type, intr_mode); ++ ++ return skb; ++} ++ ++static struct sk_buff *ath10k_wmi_op_gen_gpio_output(struct ath10k *ar, ++ u32 gpio_num, u32 set) ++{ ++ struct wmi_gpio_output_cmd *cmd; ++ struct sk_buff *skb; ++ ++ skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd)); ++ if (!skb) ++ return ERR_PTR(-ENOMEM); ++ ++ cmd = (struct wmi_gpio_output_cmd *)skb->data; ++ cmd->gpio_num = __cpu_to_le32(gpio_num); ++ cmd->set = __cpu_to_le32(set); ++ ++ ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi gpio_output gpio_num 0x%08x set 0x%08x\n", ++ gpio_num, set); ++ ++ return skb; ++} ++ + static struct sk_buff * + ath10k_wmi_op_gen_set_psmode(struct ath10k *ar, u32 vdev_id, + enum wmi_sta_ps_mode psmode) +@@ -9138,6 +9181,9 @@ static const struct wmi_ops wmi_ops = { + .fw_stats_fill = ath10k_wmi_main_op_fw_stats_fill, + .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype, + .gen_echo = ath10k_wmi_op_gen_echo, ++ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config, ++ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output, ++ + /* .gen_bcn_tmpl not implemented */ + /* .gen_prb_tmpl not implemented */ + /* .gen_p2p_go_bcn_ie not implemented */ +@@ -9208,6 +9254,8 @@ static const struct wmi_ops wmi_10_1_ops + .fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill, + .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype, + .gen_echo = ath10k_wmi_op_gen_echo, ++ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config, ++ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output, + /* .gen_bcn_tmpl not implemented */ + /* .gen_prb_tmpl not implemented */ + /* .gen_p2p_go_bcn_ie not implemented */ +@@ -9280,6 +9328,8 @@ static const struct wmi_ops wmi_10_2_ops + .gen_delba_send = ath10k_wmi_op_gen_delba_send, + .fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill, + .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype, ++ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config, ++ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output, + /* .gen_pdev_enable_adaptive_cca not implemented */ + }; + +@@ -9351,6 +9401,8 @@ static const struct wmi_ops wmi_10_2_4_o + ath10k_wmi_op_gen_pdev_enable_adaptive_cca, + .get_vdev_subtype = ath10k_wmi_10_2_4_op_get_vdev_subtype, + .gen_bb_timing = ath10k_wmi_10_2_4_op_gen_bb_timing, ++ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config, ++ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output, + /* .gen_bcn_tmpl not implemented */ + /* .gen_prb_tmpl not implemented */ + /* .gen_p2p_go_bcn_ie not implemented */ +@@ -9432,6 +9484,8 @@ static const struct wmi_ops wmi_10_4_ops + .gen_pdev_bss_chan_info_req = ath10k_wmi_10_2_op_gen_pdev_bss_chan_info, + .gen_echo = ath10k_wmi_op_gen_echo, + .gen_pdev_get_tpc_config = ath10k_wmi_10_2_4_op_gen_pdev_get_tpc_config, ++ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config, ++ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output, + }; + + int ath10k_wmi_attach(struct ath10k *ar) +--- a/drivers/net/wireless/ath/ath10k/wmi.h ++++ b/drivers/net/wireless/ath/ath10k/wmi.h +@@ -3030,6 +3030,41 @@ enum wmi_10_4_feature_mask { + + }; + ++/* WMI_GPIO_CPTCFG_CMDID */ ++enum { ++ WMI_GPIO_PULL_NONE, ++ WMI_GPIO_PULL_UP, ++ WMI_GPIO_PULL_DOWN, ++}; ++ ++enum { ++ WMI_GPIO_INTTYPE_DISABLE, ++ WMI_GPIO_INTTYPE_RISING_EDGE, ++ WMI_GPIO_INTTYPE_FALLING_EDGE, ++ WMI_GPIO_INTTYPE_BOTH_EDGE, ++ WMI_GPIO_INTTYPE_LEVEL_LOW, ++ WMI_GPIO_INTTYPE_LEVEL_HIGH ++}; ++ ++/* WMI_GPIO_CPTCFG_CMDID */ ++struct wmi_gpio_config_cmd { ++ __le32 gpio_num; /* GPIO number to be setup */ ++ __le32 input; /* 0 - Output/ 1 - Input */ ++ __le32 pull_type; /* Pull type defined above */ ++ __le32 intr_mode; /* Interrupt mode defined above (Input) */ ++} __packed; ++ ++/* WMI_GPIO_OUTPUT_CMDID */ ++struct wmi_gpio_output_cmd { ++ __le32 gpio_num; /* GPIO number to be setup */ ++ __le32 set; /* Set the GPIO pin*/ ++} __packed; ++ ++/* WMI_GPIO_INPUT_EVENTID */ ++struct wmi_gpio_input_event { ++ __le32 gpio_num; /* GPIO number which changed state */ ++} __packed; ++ + struct wmi_ext_resource_config_10_4_cmd { + /* contains enum wmi_host_platform_type */ + __le32 host_platform_config; diff --git a/package/kernel/mac80211/patches/ath10k/975-ath10k-use-tpt-trigger-by-default.patch b/package/kernel/mac80211/patches/ath10k/975-ath10k-use-tpt-trigger-by-default.patch index 95bd48f923..2e598199c4 100644 --- a/package/kernel/mac80211/patches/ath10k/975-ath10k-use-tpt-trigger-by-default.patch +++ b/package/kernel/mac80211/patches/ath10k/975-ath10k-use-tpt-trigger-by-default.patch @@ -29,12 +29,10 @@ Signed-off-by: Mathias Kresin }; --- a/drivers/net/wireless/ath/ath10k/leds.c +++ b/drivers/net/wireless/ath/ath10k/leds.c -@@ -81,9 +81,7 @@ int ath10k_leds_register(struct ath10k * +@@ -70,7 +70,7 @@ int ath10k_leds_register(struct ath10k * ar->leds.cdev.name = ar->leds.label; ar->leds.cdev.brightness_set_blocking = ath10k_leds_set_brightness_blocking; -- -- /* FIXME: this assignment doesn't make sense as it's NULL, remove it? */ - ar->leds.cdev.default_trigger = ar->leds.wifi_led.default_trigger; + ar->leds.cdev.default_trigger = ar->led_default_trigger; diff --git a/package/kernel/mac80211/patches/ath10k/984-ath10k-Try-to-get-mac-address-from-dts.patch b/package/kernel/mac80211/patches/ath10k/984-ath10k-Try-to-get-mac-address-from-dts.patch index cfa0f9108a..6439ff9803 100644 --- a/package/kernel/mac80211/patches/ath10k/984-ath10k-Try-to-get-mac-address-from-dts.patch +++ b/package/kernel/mac80211/patches/ath10k/984-ath10k-Try-to-get-mac-address-from-dts.patch @@ -26,7 +26,7 @@ Signed-off-by: Ansuel Smith #include #include #include -@@ -3398,6 +3399,8 @@ static int ath10k_core_probe_fw(struct a +@@ -3409,6 +3410,8 @@ static int ath10k_core_probe_fw(struct a device_get_mac_address(ar->dev, ar->mac_addr);