From: Mauro Carvalho Chehab Date: Fri, 24 Jan 2014 14:14:17 +0000 (-0300) Subject: [media] drx-j: get rid of drx_ctrl X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=dc5a91d49d147f47b2305ad76d67982462c5ac5f;p=openwrt%2Fstaging%2Fblogic.git [media] drx-j: get rid of drx_ctrl This function is used only as an abstraction layer to call the two firmware functions. Remove it. As a bonus, the drx_ctrl_function is now unused and can be removed. Acked-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/dvb-frontends/drx39xyj/drx39xxj.c b/drivers/media/dvb-frontends/drx39xyj/drx39xxj.c index 7a7a4a87fe25..7e316618bfa9 100644 --- a/drivers/media/dvb-frontends/drx39xyj/drx39xxj.c +++ b/drivers/media/dvb-frontends/drx39xyj/drx39xxj.c @@ -45,7 +45,7 @@ static int drx39xxj_set_powerstate(struct dvb_frontend *fe, int enable) else power_mode = DRX_POWER_DOWN; - result = drx_ctrl(demod, DRX_CTRL_POWER_MODE, &power_mode); + result = drxj_ctrl(demod, DRX_CTRL_POWER_MODE, &power_mode); if (result != 0) { pr_err("Power state change failed\n"); return 0; @@ -64,7 +64,7 @@ static int drx39xxj_read_status(struct dvb_frontend *fe, fe_status_t *status) *status = 0; - result = drx_ctrl(demod, DRX_CTRL_LOCK_STATUS, &lock_status); + result = drxj_ctrl(demod, DRX_CTRL_LOCK_STATUS, &lock_status); if (result != 0) { pr_err("drx39xxj: could not get lock status!\n"); *status = 0; @@ -109,7 +109,7 @@ static int drx39xxj_read_ber(struct dvb_frontend *fe, u32 *ber) int result; struct drx_sig_quality sig_quality; - result = drx_ctrl(demod, DRX_CTRL_SIG_QUALITY, &sig_quality); + result = drxj_ctrl(demod, DRX_CTRL_SIG_QUALITY, &sig_quality); if (result != 0) { pr_err("drx39xxj: could not get ber!\n"); *ber = 0; @@ -128,7 +128,7 @@ static int drx39xxj_read_signal_strength(struct dvb_frontend *fe, int result; struct drx_sig_quality sig_quality; - result = drx_ctrl(demod, DRX_CTRL_SIG_QUALITY, &sig_quality); + result = drxj_ctrl(demod, DRX_CTRL_SIG_QUALITY, &sig_quality); if (result != 0) { pr_err("drx39xxj: could not get signal strength!\n"); *strength = 0; @@ -147,7 +147,7 @@ static int drx39xxj_read_snr(struct dvb_frontend *fe, u16 *snr) int result; struct drx_sig_quality sig_quality; - result = drx_ctrl(demod, DRX_CTRL_SIG_QUALITY, &sig_quality); + result = drxj_ctrl(demod, DRX_CTRL_SIG_QUALITY, &sig_quality); if (result != 0) { pr_err("drx39xxj: could not read snr!\n"); *snr = 0; @@ -165,7 +165,7 @@ static int drx39xxj_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) int result; struct drx_sig_quality sig_quality; - result = drx_ctrl(demod, DRX_CTRL_SIG_QUALITY, &sig_quality); + result = drxj_ctrl(demod, DRX_CTRL_SIG_QUALITY, &sig_quality); if (result != 0) { pr_err("drx39xxj: could not get uc blocks!\n"); *ucblocks = 0; @@ -244,7 +244,7 @@ static int drx39xxj_set_frontend(struct dvb_frontend *fe) if (standard != state->current_standard || state->powered_up == 0) { /* Set the standard (will be powered up if necessary */ - result = drx_ctrl(demod, DRX_CTRL_SET_STANDARD, &standard); + result = drxj_ctrl(demod, DRX_CTRL_SET_STANDARD, &standard); if (result != 0) { pr_err("Failed to set standard! result=%02x\n", result); @@ -261,7 +261,7 @@ static int drx39xxj_set_frontend(struct dvb_frontend *fe) channel.constellation = constellation; /* program channel */ - result = drx_ctrl(demod, DRX_CTRL_SET_CHANNEL, &channel); + result = drxj_ctrl(demod, DRX_CTRL_SET_CHANNEL, &channel); if (result != 0) { pr_err("Failed to set channel!\n"); return -EINVAL; @@ -269,7 +269,7 @@ static int drx39xxj_set_frontend(struct dvb_frontend *fe) /* Just for giggles, let's shut off the LNA again.... */ uio_data.uio = DRX_UIO1; uio_data.value = false; - result = drx_ctrl(demod, DRX_CTRL_UIO_WRITE, &uio_data); + result = drxj_ctrl(demod, DRX_CTRL_UIO_WRITE, &uio_data); if (result != 0) { pr_err("Failed to disable LNA!\n"); return 0; @@ -315,7 +315,7 @@ static int drx39xxj_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) return 0; } - result = drx_ctrl(demod, DRX_CTRL_I2C_BRIDGE, &i2c_gate_state); + result = drxj_ctrl(demod, DRX_CTRL_I2C_BRIDGE, &i2c_gate_state); if (result != 0) { pr_err("drx39xxj: could not open i2c gate [%d]\n", result); @@ -423,7 +423,7 @@ struct dvb_frontend *drx39xxj_attach(struct i2c_adapter *i2c) uio_cfg.uio = DRX_UIO1; uio_cfg.mode = DRX_UIO_MODE_READWRITE; /* Configure user-I/O #3: enable read/write */ - result = drx_ctrl(demod, DRX_CTRL_UIO_CFG, &uio_cfg); + result = drxj_ctrl(demod, DRX_CTRL_UIO_CFG, &uio_cfg); if (result) { pr_err("Failed to setup LNA GPIO!\n"); goto error; @@ -431,7 +431,7 @@ struct dvb_frontend *drx39xxj_attach(struct i2c_adapter *i2c) uio_data.uio = DRX_UIO1; uio_data.value = false; - result = drx_ctrl(demod, DRX_CTRL_UIO_WRITE, &uio_data); + result = drxj_ctrl(demod, DRX_CTRL_UIO_WRITE, &uio_data); if (result != 0) { pr_err("Failed to disable LNA!\n"); goto error; diff --git a/drivers/media/dvb-frontends/drx39xyj/drx_driver.h b/drivers/media/dvb-frontends/drx39xyj/drx_driver.h index 343ae519b5dc..9ecf01029e90 100644 --- a/drivers/media/dvb-frontends/drx39xyj/drx_driver.h +++ b/drivers/media/dvb-frontends/drx39xyj/drx_driver.h @@ -2468,9 +2468,6 @@ Exported FUNCTIONS int drx_close(struct drx_demod_instance *demod); - int drx_ctrl(struct drx_demod_instance *demod, - u32 ctrl, void *ctrl_data); - /*------------------------------------------------------------------------- THE END -------------------------------------------------------------------------*/ diff --git a/drivers/media/dvb-frontends/drx39xyj/drxj.c b/drivers/media/dvb-frontends/drx39xyj/drxj.c index cea5b6d66ab7..083673525243 100644 --- a/drivers/media/dvb-frontends/drx39xyj/drxj.c +++ b/drivers/media/dvb-frontends/drx39xyj/drxj.c @@ -19797,6 +19797,10 @@ rw_error: /*============================================================================= ===== EXPORTED FUNCTIONS ====================================================*/ +static int drx_ctrl_u_code(struct drx_demod_instance *demod, + struct drxu_code_info *mc_info, + enum drxu_code_action action); + /** * \fn drxj_open() * \brief Open the demod instance, configure device, configure drxdriver @@ -19807,6 +19811,7 @@ rw_error: * rely on SCU or AUD ucode to be present. * */ + int drxj_open(struct drx_demod_instance *demod) { struct i2c_device_addr *dev_addr = NULL; @@ -19908,15 +19913,21 @@ int drxj_open(struct drx_demod_instance *demod) common_attr->is_opened = true; ucode_info.mc_file = common_attr->microcode_file; - rc = drx_ctrl(demod, DRX_CTRL_LOAD_UCODE, &ucode_info); + if (DRX_ISPOWERDOWNMODE(demod->my_common_attr->current_power_mode)) { + pr_err("Should powerup before loading the firmware."); + return -EINVAL; + } + + rc = drx_ctrl_u_code(demod, &ucode_info, UCODE_UPLOAD); if (rc != 0) { - pr_err("error %d\n", rc); + pr_err("error %d while uploading the firmware\n", rc); goto rw_error; } if (common_attr->verify_microcode == true) { - rc = drx_ctrl(demod, DRX_CTRL_VERIFY_UCODE, &ucode_info); + rc = drx_ctrl_u_code(demod, &ucode_info, UCODE_VERIFY); if (rc != 0) { - pr_err("error %d\n", rc); + pr_err("error %d while verifying the firmware\n", + rc); goto rw_error; } } @@ -20454,17 +20465,8 @@ static int drx_ctrl_u_code(struct drx_demod_instance *demod, rc = drx_check_firmware(demod, (u8 *)mc_data_init, size); if (rc) goto release; - - /* After scanning, validate the microcode. - It is also valid if no validation control exists. - */ - rc = drx_ctrl(demod, DRX_CTRL_VALIDATE_UCODE, NULL); - if (rc != 0 && rc != -ENOTSUPP) { - pr_err("Validate ucode not supported\n"); - return rc; - } pr_info("Uploading firmware %s\n", mc_file); - } else if (action == UCODE_VERIFY) { + } else { pr_info("Verifying if firmware upload was ok.\n"); } @@ -20579,67 +20581,6 @@ release: /*============================================================================*/ -/** - * drx_ctrl_version - Build list of version information. - * @demod: A pointer to a demodulator instance. - * @version_list: Pointer to linked list of versions. - * - * This function returns: - * 0: Version information stored in version_list - * -EINVAL: Invalid arguments. - */ -static int drx_ctrl_version(struct drx_demod_instance *demod, - struct drx_version_list **version_list) -{ - static char drx_driver_core_module_name[] = "Core driver"; - static char drx_driver_core_version_text[] = - DRX_VERSIONSTRING(0, 0, 0); - - static struct drx_version drx_driver_core_version; - static struct drx_version_list drx_driver_core_version_list; - - struct drx_version_list *demod_version_list = NULL; - int return_status = -EIO; - - /* Check arguments */ - if (version_list == NULL) - return -EINVAL; - - /* Get version info list from demod */ - return_status = (*(demod->my_demod_funct->ctrl_func)) (demod, - DRX_CTRL_VERSION, - (void *) - &demod_version_list); - - /* Always fill in the information of the driver SW . */ - drx_driver_core_version.module_type = DRX_MODULE_DRIVERCORE; - drx_driver_core_version.module_name = drx_driver_core_module_name; - drx_driver_core_version.v_major = 0; - drx_driver_core_version.v_minor = 0; - drx_driver_core_version.v_patch = 0; - drx_driver_core_version.v_string = drx_driver_core_version_text; - - drx_driver_core_version_list.version = &drx_driver_core_version; - drx_driver_core_version_list.next = (struct drx_version_list *) (NULL); - - if ((return_status == 0) && (demod_version_list != NULL)) { - /* Append versioninfo from driver to versioninfo from demod */ - /* Return version info in "bottom-up" order. This way, multiple - devices can be handled without using malloc. */ - struct drx_version_list *current_list_element = demod_version_list; - while (current_list_element->next != NULL) - current_list_element = current_list_element->next; - current_list_element->next = &drx_driver_core_version_list; - - *version_list = demod_version_list; - } else { - /* Just return versioninfo from driver */ - *version_list = &drx_driver_core_version_list; - } - - return 0; -} - /* * Exported functions */ @@ -20711,97 +20652,3 @@ int drx_close(struct drx_demod_instance *demod) return status; } -/** - * drx_ctrl - Control the device. - * @demod: A pointer to a demodulator instance. - * @ctrl: Reference to desired control function. - * @ctrl_data: Pointer to data structure for control function. - * - * Data needed or returned by the control function is stored in ctrl_data. - * - * This function returns: - * 0: Control function completed successfully. - * -EIO: Driver not initialized or error during control demod. - * -EINVAL: Demod instance or ctrl_data has invalid content. - * -ENOTSUPP: Specified control function is not available. - */ - -int drx_ctrl(struct drx_demod_instance *demod, u32 ctrl, void *ctrl_data) -{ - int status = -EIO; - - if ((demod == NULL) || - (demod->my_demod_funct == NULL) || - (demod->my_common_attr == NULL) || - (demod->my_ext_attr == NULL) || (demod->my_i2c_dev_addr == NULL) - ) { - return -EINVAL; - } - - if (((!demod->my_common_attr->is_opened) && - (ctrl != DRX_CTRL_PROBE_DEVICE) && (ctrl != DRX_CTRL_VERSION)) - ) { - return -EINVAL; - } - - if ((DRX_ISPOWERDOWNMODE(demod->my_common_attr->current_power_mode) && - (ctrl != DRX_CTRL_POWER_MODE) && - (ctrl != DRX_CTRL_PROBE_DEVICE) && - (ctrl != DRX_CTRL_NOP) && (ctrl != DRX_CTRL_VERSION) - ) - ) { - return -ENOTSUPP; - } - - /* Fixed control functions */ - switch (ctrl) { - /*======================================================================*/ - case DRX_CTRL_NOP: - /* No operation */ - return 0; - break; - - /*======================================================================*/ - case DRX_CTRL_VERSION: - return drx_ctrl_version(demod, (struct drx_version_list **)ctrl_data); - break; - - /*======================================================================*/ - default: - /* Do nothing */ - break; - } - - /* Virtual functions */ - /* First try calling function from derived class */ - status = (*(demod->my_demod_funct->ctrl_func)) (demod, ctrl, ctrl_data); - if (status == -ENOTSUPP) { - /* Now try calling a the base class function */ - switch (ctrl) { - /*===================================================================*/ - case DRX_CTRL_LOAD_UCODE: - return drx_ctrl_u_code(demod, - (struct drxu_code_info *)ctrl_data, - UCODE_UPLOAD); - break; - - /*===================================================================*/ - case DRX_CTRL_VERIFY_UCODE: - { - return drx_ctrl_u_code(demod, - (struct drxu_code_info *)ctrl_data, - UCODE_VERIFY); - } - break; - - /*===================================================================*/ - default: - pr_err("control %d not supported\n", ctrl); - return -ENOTSUPP; - } - } else { - return status; - } - - return 0; -} \ No newline at end of file