From: Catrinel Catrinescu <cc@80211.de>
Date: Tue, 5 Jun 2018 14:56:48 +0000 (+0200)
Subject: ath79: add WLAN, Ethernet-Switch with LAN/WAN and Status LED to Dorin
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=dc1268cb11d827f1868d6ef96e3d289431165c0e;p=openwrt%2Fstaging%2Frmilecki.git

ath79: add WLAN, Ethernet-Switch with LAN/WAN and Status LED to Dorin

Signed-off-by: Catrinel Catrinescu <cc@80211.de>
---

diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index a9eeb5b4559..e6ef47240f5 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -14,6 +14,11 @@ ath79_setup_interfaces()
 		ucidef_set_interface_lan "eth0"
 		;;
 
+	"embeddedwireless,dorin")
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:wan" "2:lan:3" "3:lan:2"
+		;;
+
 	"glinet,ar150")
 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
 		;;
diff --git a/target/linux/ath79/base-files/etc/diag.sh b/target/linux/ath79/base-files/etc/diag.sh
index b18463413a4..0a5011a7aed 100644
--- a/target/linux/ath79/base-files/etc/diag.sh
+++ b/target/linux/ath79/base-files/etc/diag.sh
@@ -12,6 +12,9 @@ get_status_led() {
 	"avm,fritz300e")
 		status_led="${boardname}:green:power"
 		;;
+	"embeddedwireless,dorin")
+		status_led="dorin:green:status"
+		;;
 	"glinet,ar150")
 		status_led="gl-ar150:orange:wlan"
 		;;
diff --git a/target/linux/ath79/dts/ar9331_embeddedwireless_dorin.dts b/target/linux/ath79/dts/ar9331_embeddedwireless_dorin.dts
index 4b204b7561c..eff3b091ecc 100644
--- a/target/linux/ath79/dts/ar9331_embeddedwireless_dorin.dts
+++ b/target/linux/ath79/dts/ar9331_embeddedwireless_dorin.dts
@@ -111,20 +111,21 @@
 	status = "okay";
 
 	mtd-mac-address = <&art 0x1002>;
+	mtd-mac-address-increment = <0x40>;
 
 	fixed-link {
 		speed = <1000>;
 		full-duplex;
 	};
 
-	gmac-config {
-		device = <&gmac>;
-
-		switch-phy-addr-swap = <1>;
-		switch-phy-swap = <1>;
-	};
 };
 
 &mdio1 {
 	status = "okay";
 };
+
+&wmac {
+	status = "okay";
+	mtd-cal-data = <&art 0x1000>;
+	mtd-mac-address = <&art 0x1002>;
+};