From: Gabor Juhos Date: Fri, 6 Jun 2008 08:54:13 +0000 (+0000) Subject: refresh patches to match upstream style X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=db4cd8515c1076aee2517a51e4f57c7f74ae31a5;p=openwrt%2Fstaging%2Fansuel.git refresh patches to match upstream style SVN-Revision: 11374 --- diff --git a/target/linux/adm5120/patches-2.6.25/001-adm5120.patch b/target/linux/adm5120/patches-2.6.25/001-adm5120.patch index 8818fd852d..84d0a8d2fc 100644 --- a/target/linux/adm5120/patches-2.6.25/001-adm5120.patch +++ b/target/linux/adm5120/patches-2.6.25/001-adm5120.patch @@ -1,8 +1,6 @@ -Index: linux-2.6.25.4/arch/mips/Kconfig -=================================================================== ---- linux-2.6.25.4.orig/arch/mips/Kconfig -+++ linux-2.6.25.4/arch/mips/Kconfig -@@ -18,6 +18,20 @@ choice +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -18,6 +18,20 @@ prompt "System type" default SGI_IP22 @@ -23,7 +21,7 @@ Index: linux-2.6.25.4/arch/mips/Kconfig config MACH_ALCHEMY bool "Alchemy processor based machines" -@@ -683,6 +697,7 @@ config WR_PPMC +@@ -683,6 +697,7 @@ endchoice @@ -31,11 +29,9 @@ Index: linux-2.6.25.4/arch/mips/Kconfig source "arch/mips/au1000/Kconfig" source "arch/mips/basler/excite/Kconfig" source "arch/mips/jazz/Kconfig" -Index: linux-2.6.25.4/arch/mips/Makefile -=================================================================== ---- linux-2.6.25.4.orig/arch/mips/Makefile -+++ linux-2.6.25.4/arch/mips/Makefile -@@ -174,6 +174,16 @@ cflags-$(CONFIG_MACH_JAZZ) += -Iinclude/ +--- a/arch/mips/Makefile ++++ b/arch/mips/Makefile +@@ -174,6 +174,16 @@ load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000 # @@ -52,10 +48,8 @@ Index: linux-2.6.25.4/arch/mips/Makefile # Common Alchemy Au1x00 stuff # core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/ -Index: linux-2.6.25.4/include/asm-mips/bootinfo.h -=================================================================== ---- linux-2.6.25.4.orig/include/asm-mips/bootinfo.h -+++ linux-2.6.25.4/include/asm-mips/bootinfo.h +--- a/include/asm-mips/bootinfo.h ++++ b/include/asm-mips/bootinfo.h @@ -94,6 +94,58 @@ #define MACH_MSP7120_FPGA 5 /* PMC-Sierra MSP7120 Emulation */ #define MACH_MSP_OTHER 255 /* PMC-Sierra unknown board type */ diff --git a/target/linux/adm5120/patches-2.6.25/002-adm5120_flash.patch b/target/linux/adm5120/patches-2.6.25/002-adm5120_flash.patch index dfe8eb72c8..143952321a 100644 --- a/target/linux/adm5120/patches-2.6.25/002-adm5120_flash.patch +++ b/target/linux/adm5120/patches-2.6.25/002-adm5120_flash.patch @@ -1,8 +1,6 @@ -Index: linux-2.6.25.4/drivers/mtd/maps/Kconfig -=================================================================== ---- linux-2.6.25.4.orig/drivers/mtd/maps/Kconfig -+++ linux-2.6.25.4/drivers/mtd/maps/Kconfig -@@ -590,5 +590,9 @@ config MTD_PLATRAM +--- a/drivers/mtd/maps/Kconfig ++++ b/drivers/mtd/maps/Kconfig +@@ -590,5 +590,9 @@ This selection automatically selects the map_ram driver. @@ -12,11 +10,9 @@ Index: linux-2.6.25.4/drivers/mtd/maps/Kconfig + endmenu -Index: linux-2.6.25.4/drivers/mtd/maps/Makefile -=================================================================== ---- linux-2.6.25.4.orig/drivers/mtd/maps/Makefile -+++ linux-2.6.25.4/drivers/mtd/maps/Makefile -@@ -44,6 +44,7 @@ obj-$(CONFIG_MTD_DBOX2) += dbox2-flash. +--- a/drivers/mtd/maps/Makefile ++++ b/drivers/mtd/maps/Makefile +@@ -44,6 +44,7 @@ obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o obj-$(CONFIG_MTD_PCI) += pci.o obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o diff --git a/target/linux/adm5120/patches-2.6.25/003-adm5120_switch.patch b/target/linux/adm5120/patches-2.6.25/003-adm5120_switch.patch index 36579c529d..20718119fa 100644 --- a/target/linux/adm5120/patches-2.6.25/003-adm5120_switch.patch +++ b/target/linux/adm5120/patches-2.6.25/003-adm5120_switch.patch @@ -1,8 +1,6 @@ -Index: linux-2.6.25.4/drivers/net/Kconfig -=================================================================== ---- linux-2.6.25.4.orig/drivers/net/Kconfig -+++ linux-2.6.25.4/drivers/net/Kconfig -@@ -606,6 +606,10 @@ config MIPS_AU1X00_ENET +--- a/drivers/net/Kconfig ++++ b/drivers/net/Kconfig +@@ -606,6 +606,10 @@ If you have an Alchemy Semi AU1X00 based system say Y. Otherwise, say N. @@ -13,11 +11,9 @@ Index: linux-2.6.25.4/drivers/net/Kconfig config SGI_IOC3_ETH bool "SGI IOC3 Ethernet" depends on PCI && SGI_IP27 -Index: linux-2.6.25.4/drivers/net/Makefile -=================================================================== ---- linux-2.6.25.4.orig/drivers/net/Makefile -+++ linux-2.6.25.4/drivers/net/Makefile -@@ -187,6 +187,7 @@ obj-$(CONFIG_SC92031) += sc92031.o +--- a/drivers/net/Makefile ++++ b/drivers/net/Makefile +@@ -187,6 +187,7 @@ # This is also a 82596 and should probably be merged obj-$(CONFIG_LP486E) += lp486e.o diff --git a/target/linux/adm5120/patches-2.6.25/005-adm5120_usb.patch b/target/linux/adm5120/patches-2.6.25/005-adm5120_usb.patch index 262ab779c7..4ab31dd980 100644 --- a/target/linux/adm5120/patches-2.6.25/005-adm5120_usb.patch +++ b/target/linux/adm5120/patches-2.6.25/005-adm5120_usb.patch @@ -1,19 +1,15 @@ -Index: linux-2.6.25.4/drivers/usb/host/Kconfig -=================================================================== ---- linux-2.6.25.4.orig/drivers/usb/host/Kconfig -+++ linux-2.6.25.4/drivers/usb/host/Kconfig -@@ -260,3 +260,6 @@ config USB_R8A66597_HCD +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -260,3 +260,6 @@ To compile this driver as a module, choose M here: the module will be called r8a66597-hcd. +config USB_ADM5120_HCD + tristate "ADM5120 HCD support (EXPERIMENTAL)" + depends on USB && MIPS_ADM5120 && EXPERIMENTAL -Index: linux-2.6.25.4/drivers/usb/host/Makefile -=================================================================== ---- linux-2.6.25.4.orig/drivers/usb/host/Makefile -+++ linux-2.6.25.4/drivers/usb/host/Makefile -@@ -8,6 +8,7 @@ endif +--- a/drivers/usb/host/Makefile ++++ b/drivers/usb/host/Makefile +@@ -8,6 +8,7 @@ obj-$(CONFIG_PCI) += pci-quirks.o @@ -21,11 +17,9 @@ Index: linux-2.6.25.4/drivers/usb/host/Makefile obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o -Index: linux-2.6.25.4/drivers/usb/Makefile -=================================================================== ---- linux-2.6.25.4.orig/drivers/usb/Makefile -+++ linux-2.6.25.4/drivers/usb/Makefile -@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD) += host/ +--- a/drivers/usb/Makefile ++++ b/drivers/usb/Makefile +@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_SL811_HCD) += host/ obj-$(CONFIG_USB_U132_HCD) += host/ obj-$(CONFIG_USB_R8A66597_HCD) += host/ diff --git a/target/linux/adm5120/patches-2.6.25/006-adm5120_leds.patch b/target/linux/adm5120/patches-2.6.25/006-adm5120_leds.patch index 8d3789e8b0..ac108e512f 100644 --- a/target/linux/adm5120/patches-2.6.25/006-adm5120_leds.patch +++ b/target/linux/adm5120/patches-2.6.25/006-adm5120_leds.patch @@ -1,8 +1,6 @@ -Index: linux-2.6.25.4/drivers/leds/Kconfig -=================================================================== ---- linux-2.6.25.4.orig/drivers/leds/Kconfig -+++ linux-2.6.25.4/drivers/leds/Kconfig -@@ -25,6 +25,21 @@ config LEDS_ATMEL_PWM +--- a/drivers/leds/Kconfig ++++ b/drivers/leds/Kconfig +@@ -25,6 +25,21 @@ This option enables support for LEDs driven using outputs of the dedicated PWM controller found on newer Atmel SOCs. @@ -24,11 +22,9 @@ Index: linux-2.6.25.4/drivers/leds/Kconfig config LEDS_CORGI tristate "LED Support for the Sharp SL-C7x0 series" depends on LEDS_CLASS && PXA_SHARP_C7xx -Index: linux-2.6.25.4/drivers/leds/Makefile -=================================================================== ---- linux-2.6.25.4.orig/drivers/leds/Makefile -+++ linux-2.6.25.4/drivers/leds/Makefile -@@ -5,6 +5,7 @@ obj-$(CONFIG_LEDS_CLASS) += led-class.o +--- a/drivers/leds/Makefile ++++ b/drivers/leds/Makefile +@@ -5,6 +5,7 @@ obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o # LED Platform Drivers diff --git a/target/linux/adm5120/patches-2.6.25/007-adm5120_pci.patch b/target/linux/adm5120/patches-2.6.25/007-adm5120_pci.patch index d113fd3ce4..571c87675f 100644 --- a/target/linux/adm5120/patches-2.6.25/007-adm5120_pci.patch +++ b/target/linux/adm5120/patches-2.6.25/007-adm5120_pci.patch @@ -1,16 +1,12 @@ -Index: linux-2.6.25.4/arch/mips/pci/Makefile -=================================================================== ---- linux-2.6.25.4.orig/arch/mips/pci/Makefile -+++ linux-2.6.25.4/arch/mips/pci/Makefile -@@ -48,3 +48,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup- +--- a/arch/mips/pci/Makefile ++++ b/arch/mips/pci/Makefile +@@ -48,3 +48,4 @@ obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o +obj-$(CONFIG_PCI_ADM5120) += pci-adm5120.o -Index: linux-2.6.25.4/include/linux/pci_ids.h -=================================================================== ---- linux-2.6.25.4.orig/include/linux/pci_ids.h -+++ linux-2.6.25.4/include/linux/pci_ids.h +--- a/include/linux/pci_ids.h ++++ b/include/linux/pci_ids.h @@ -1704,6 +1704,9 @@ #define PCI_VENDOR_ID_ESDGMBH 0x12fe #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111 diff --git a/target/linux/adm5120/patches-2.6.25/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-2.6.25/009-adm5120_leds_switch_trigger.patch index 15f9582dd6..18280ed85e 100644 --- a/target/linux/adm5120/patches-2.6.25/009-adm5120_leds_switch_trigger.patch +++ b/target/linux/adm5120/patches-2.6.25/009-adm5120_leds_switch_trigger.patch @@ -1,8 +1,6 @@ -Index: linux-2.6.25.4/drivers/leds/Kconfig -=================================================================== ---- linux-2.6.25.4.orig/drivers/leds/Kconfig -+++ linux-2.6.25.4/drivers/leds/Kconfig -@@ -213,4 +213,12 @@ config LEDS_TRIGGER_DEFAULT_ON +--- a/drivers/leds/Kconfig ++++ b/drivers/leds/Kconfig +@@ -213,4 +213,12 @@ This allows LEDs to be initialised in the ON state. If unsure, say Y. @@ -15,11 +13,9 @@ Index: linux-2.6.25.4/drivers/leds/Kconfig + If unsure, say N. + endif # NEW_LEDS -Index: linux-2.6.25.4/drivers/leds/Makefile -=================================================================== ---- linux-2.6.25.4.orig/drivers/leds/Makefile -+++ linux-2.6.25.4/drivers/leds/Makefile -@@ -30,3 +30,4 @@ obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK) += l +--- a/drivers/leds/Makefile ++++ b/drivers/leds/Makefile +@@ -30,3 +30,4 @@ obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o diff --git a/target/linux/adm5120/patches-2.6.25/100-mtd_myloder_partition_parser.patch b/target/linux/adm5120/patches-2.6.25/100-mtd_myloder_partition_parser.patch index 5b5d38b280..f5188936da 100644 --- a/target/linux/adm5120/patches-2.6.25/100-mtd_myloder_partition_parser.patch +++ b/target/linux/adm5120/patches-2.6.25/100-mtd_myloder_partition_parser.patch @@ -1,8 +1,6 @@ -Index: linux-2.6.25.4/drivers/mtd/Kconfig -=================================================================== ---- linux-2.6.25.4.orig/drivers/mtd/Kconfig -+++ linux-2.6.25.4/drivers/mtd/Kconfig -@@ -168,6 +168,22 @@ config MTD_OF_PARTS +--- a/drivers/mtd/Kconfig ++++ b/drivers/mtd/Kconfig +@@ -168,6 +168,22 @@ the partition map from the children of the flash node, as described in Documentation/powerpc/booting-without-of.txt. @@ -25,11 +23,9 @@ Index: linux-2.6.25.4/drivers/mtd/Kconfig comment "User Modules And Translation Layers" config MTD_CHAR -Index: linux-2.6.25.4/drivers/mtd/Makefile -=================================================================== ---- linux-2.6.25.4.orig/drivers/mtd/Makefile -+++ linux-2.6.25.4/drivers/mtd/Makefile -@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo +--- a/drivers/mtd/Makefile ++++ b/drivers/mtd/Makefile +@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o obj-$(CONFIG_MTD_AFS_PARTS) += afs.o obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o diff --git a/target/linux/adm5120/patches-2.6.25/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-2.6.25/101-cfi_fixup_macronix_bootloc.patch index e1f0f6e21e..9179088934 100644 --- a/target/linux/adm5120/patches-2.6.25/101-cfi_fixup_macronix_bootloc.patch +++ b/target/linux/adm5120/patches-2.6.25/101-cfi_fixup_macronix_bootloc.patch @@ -1,7 +1,5 @@ -Index: linux-2.6.25.4/drivers/mtd/chips/cfi_cmdset_0002.c -=================================================================== ---- linux-2.6.25.4.orig/drivers/mtd/chips/cfi_cmdset_0002.c -+++ linux-2.6.25.4/drivers/mtd/chips/cfi_cmdset_0002.c +--- a/drivers/mtd/chips/cfi_cmdset_0002.c ++++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -47,12 +47,19 @@ #define MANUFACTURER_AMD 0x0001 #define MANUFACTURER_ATMEL 0x001F @@ -22,7 +20,7 @@ Index: linux-2.6.25.4/drivers/mtd/chips/cfi_cmdset_0002.c static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); -@@ -221,6 +228,41 @@ static void fixup_use_atmel_lock(struct +@@ -221,6 +228,41 @@ mtd->flags |= MTD_POWERUP_LOCK; } @@ -64,7 +62,7 @@ Index: linux-2.6.25.4/drivers/mtd/chips/cfi_cmdset_0002.c static struct cfi_fixup cfi_fixup_table[] = { { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL }, #ifdef AMD_BOOTLOC_BUG -@@ -252,6 +294,9 @@ static struct cfi_fixup fixup_table[] = +@@ -252,6 +294,9 @@ */ { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL }, { CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL }, @@ -74,11 +72,9 @@ Index: linux-2.6.25.4/drivers/mtd/chips/cfi_cmdset_0002.c { 0, 0, NULL, NULL } }; -Index: linux-2.6.25.4/drivers/mtd/chips/Kconfig -=================================================================== ---- linux-2.6.25.4.orig/drivers/mtd/chips/Kconfig -+++ linux-2.6.25.4/drivers/mtd/chips/Kconfig -@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD +--- a/drivers/mtd/chips/Kconfig ++++ b/drivers/mtd/chips/Kconfig +@@ -196,6 +196,14 @@ provides support for one of those command sets, used on chips including the AMD Am29LV320. diff --git a/target/linux/adm5120/patches-2.6.25/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches-2.6.25/102-jedec_pmc_39lvxxx_chips.patch index d3bd11e870..7f352f67ec 100644 --- a/target/linux/adm5120/patches-2.6.25/102-jedec_pmc_39lvxxx_chips.patch +++ b/target/linux/adm5120/patches-2.6.25/102-jedec_pmc_39lvxxx_chips.patch @@ -1,7 +1,5 @@ -Index: linux-2.6.25.4/drivers/mtd/chips/jedec_probe.c -=================================================================== ---- linux-2.6.25.4.orig/drivers/mtd/chips/jedec_probe.c -+++ linux-2.6.25.4/drivers/mtd/chips/jedec_probe.c +--- a/drivers/mtd/chips/jedec_probe.c ++++ b/drivers/mtd/chips/jedec_probe.c @@ -121,6 +121,10 @@ #define UPD29F064115 0x221C @@ -13,7 +11,7 @@ Index: linux-2.6.25.4/drivers/mtd/chips/jedec_probe.c #define PM49FL002 0x006D #define PM49FL004 0x006E #define PM49FL008 0x006A -@@ -1170,6 +1174,54 @@ static const struct amd_flash_info jedec +@@ -1170,6 +1174,54 @@ ERASEINFO(0x02000,2), ERASEINFO(0x04000,1), } diff --git a/target/linux/adm5120/patches-2.6.25/103-mtd_trxsplit.patch b/target/linux/adm5120/patches-2.6.25/103-mtd_trxsplit.patch index 110286e49e..267293aa56 100644 --- a/target/linux/adm5120/patches-2.6.25/103-mtd_trxsplit.patch +++ b/target/linux/adm5120/patches-2.6.25/103-mtd_trxsplit.patch @@ -1,8 +1,6 @@ -Index: linux-2.6.25.4/drivers/mtd/Kconfig -=================================================================== ---- linux-2.6.25.4.orig/drivers/mtd/Kconfig -+++ linux-2.6.25.4/drivers/mtd/Kconfig -@@ -57,6 +57,11 @@ config MTD_ROOTFS_SPLIT +--- a/drivers/mtd/Kconfig ++++ b/drivers/mtd/Kconfig +@@ -57,6 +57,11 @@ depends on MTD_PARTITIONS default y @@ -14,11 +12,9 @@ Index: linux-2.6.25.4/drivers/mtd/Kconfig config MTD_REDBOOT_PARTS tristate "RedBoot partition table parsing" depends on MTD_PARTITIONS -Index: linux-2.6.25.4/drivers/mtd/Makefile -=================================================================== ---- linux-2.6.25.4.orig/drivers/mtd/Makefile -+++ linux-2.6.25.4/drivers/mtd/Makefile -@@ -8,6 +8,7 @@ mtd-y := mtdcore.o mtdsuper.o +--- a/drivers/mtd/Makefile ++++ b/drivers/mtd/Makefile +@@ -8,6 +8,7 @@ mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.o obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o diff --git a/target/linux/adm5120/patches-2.6.25/120-rb153_cf_driver.patch b/target/linux/adm5120/patches-2.6.25/120-rb153_cf_driver.patch index c9a00d8788..6f371e340b 100644 --- a/target/linux/adm5120/patches-2.6.25/120-rb153_cf_driver.patch +++ b/target/linux/adm5120/patches-2.6.25/120-rb153_cf_driver.patch @@ -1,8 +1,6 @@ -Index: linux-2.6.25.4/drivers/ata/Makefile -=================================================================== ---- linux-2.6.25.4.orig/drivers/ata/Makefile -+++ linux-2.6.25.4/drivers/ata/Makefile -@@ -71,6 +71,7 @@ obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o +--- a/drivers/ata/Makefile ++++ b/drivers/ata/Makefile +@@ -71,6 +71,7 @@ obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o @@ -10,11 +8,9 @@ Index: linux-2.6.25.4/drivers/ata/Makefile # Should be last but two libata driver obj-$(CONFIG_PATA_ACPI) += pata_acpi.o # Should be last but one libata driver -Index: linux-2.6.25.4/drivers/ata/Kconfig -=================================================================== ---- linux-2.6.25.4.orig/drivers/ata/Kconfig -+++ linux-2.6.25.4/drivers/ata/Kconfig -@@ -679,4 +679,13 @@ config PATA_BF54X +--- a/drivers/ata/Kconfig ++++ b/drivers/ata/Kconfig +@@ -679,4 +679,13 @@ If unsure, say N. diff --git a/target/linux/adm5120/patches-2.6.25/140-cmdline_hack.patch b/target/linux/adm5120/patches-2.6.25/140-cmdline_hack.patch index e3ff7f0c77..1ced3f62dd 100644 --- a/target/linux/adm5120/patches-2.6.25/140-cmdline_hack.patch +++ b/target/linux/adm5120/patches-2.6.25/140-cmdline_hack.patch @@ -1,7 +1,5 @@ -Index: linux-2.6.25.4/arch/mips/kernel/head.S -=================================================================== ---- linux-2.6.25.4.orig/arch/mips/kernel/head.S -+++ linux-2.6.25.4/arch/mips/kernel/head.S +--- a/arch/mips/kernel/head.S ++++ b/arch/mips/kernel/head.S @@ -126,7 +126,12 @@ /* * Reserved space for exception handlers. diff --git a/target/linux/adm5120/patches-2.6.25/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches-2.6.25/200-amba_pl010_hacks.patch index 92b92d1ced..97b06acec8 100644 --- a/target/linux/adm5120/patches-2.6.25/200-amba_pl010_hacks.patch +++ b/target/linux/adm5120/patches-2.6.25/200-amba_pl010_hacks.patch @@ -1,7 +1,5 @@ -Index: linux-2.6.25.4/drivers/serial/amba-pl010.c -=================================================================== ---- linux-2.6.25.4.orig/drivers/serial/amba-pl010.c -+++ linux-2.6.25.4/drivers/serial/amba-pl010.c +--- a/drivers/serial/amba-pl010.c ++++ b/drivers/serial/amba-pl010.c @@ -52,11 +52,10 @@ #include @@ -16,7 +14,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c #define AMBA_ISR_PASS_LIMIT 256 -@@ -82,7 +81,7 @@ static void pl010_stop_tx(struct uart_po +@@ -82,7 +81,7 @@ struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int cr; @@ -25,7 +23,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c cr &= ~UART010_CR_TIE; writel(cr, uap->port.membase + UART010_CR); } -@@ -92,7 +91,7 @@ static void pl010_start_tx(struct uart_p +@@ -92,7 +91,7 @@ struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int cr; @@ -34,7 +32,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c cr |= UART010_CR_TIE; writel(cr, uap->port.membase + UART010_CR); } -@@ -102,7 +101,7 @@ static void pl010_stop_rx(struct uart_po +@@ -102,7 +101,7 @@ struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int cr; @@ -43,7 +41,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c cr &= ~(UART010_CR_RIE | UART010_CR_RTIE); writel(cr, uap->port.membase + UART010_CR); } -@@ -112,7 +111,7 @@ static void pl010_enable_ms(struct uart_ +@@ -112,7 +111,7 @@ struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int cr; @@ -52,7 +50,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c cr |= UART010_CR_MSIE; writel(cr, uap->port.membase + UART010_CR); } -@@ -122,9 +121,9 @@ static void pl010_rx_chars(struct uart_a +@@ -122,9 +121,9 @@ struct tty_struct *tty = uap->port.info->tty; unsigned int status, ch, flag, rsr, max_count = 256; @@ -64,7 +62,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c flag = TTY_NORMAL; uap->port.icount.rx++; -@@ -133,7 +132,7 @@ static void pl010_rx_chars(struct uart_a +@@ -133,7 +132,7 @@ * Note that the error handling code is * out of the main execution path */ @@ -73,7 +71,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c if (unlikely(rsr & UART01x_RSR_ANY)) { writel(0, uap->port.membase + UART01x_ECR); -@@ -165,7 +164,7 @@ static void pl010_rx_chars(struct uart_a +@@ -165,7 +164,7 @@ uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag); ignore_char: @@ -82,7 +80,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c } spin_unlock(&uap->port.lock); tty_flip_buffer_push(tty); -@@ -210,7 +209,7 @@ static void pl010_modem_status(struct ua +@@ -210,7 +209,7 @@ writel(0, uap->port.membase + UART010_ICR); @@ -91,7 +89,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c delta = status ^ uap->old_status; uap->old_status = status; -@@ -238,7 +237,7 @@ static irqreturn_t pl010_int(int irq, vo +@@ -238,7 +237,7 @@ spin_lock(&uap->port.lock); @@ -100,7 +98,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c if (status) { do { if (status & (UART010_IIR_RTIS | UART010_IIR_RIS)) -@@ -251,7 +250,7 @@ static irqreturn_t pl010_int(int irq, vo +@@ -251,7 +250,7 @@ if (pass_counter-- == 0) break; @@ -109,7 +107,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS | UART010_IIR_TIS)); handled = 1; -@@ -265,7 +264,7 @@ static irqreturn_t pl010_int(int irq, vo +@@ -265,7 +264,7 @@ static unsigned int pl010_tx_empty(struct uart_port *port) { struct uart_amba_port *uap = (struct uart_amba_port *)port; @@ -118,7 +116,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT; } -@@ -275,7 +274,7 @@ static unsigned int pl010_get_mctrl(stru +@@ -275,7 +274,7 @@ unsigned int result = 0; unsigned int status; @@ -127,7 +125,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c if (status & UART01x_FR_DCD) result |= TIOCM_CAR; if (status & UART01x_FR_DSR) -@@ -301,7 +300,7 @@ static void pl010_break_ctl(struct uart_ +@@ -301,7 +300,7 @@ unsigned int lcr_h; spin_lock_irqsave(&uap->port.lock, flags); @@ -136,7 +134,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c if (break_state == -1) lcr_h |= UART01x_LCRH_BRK; else -@@ -334,7 +333,7 @@ static int pl010_startup(struct uart_por +@@ -334,7 +333,7 @@ /* * initialise the old status of the modem signals */ @@ -145,7 +143,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c /* * Finally, enable interrupts -@@ -365,7 +364,7 @@ static void pl010_shutdown(struct uart_p +@@ -365,7 +364,7 @@ writel(0, uap->port.membase + UART010_CR); /* disable break condition and fifos */ @@ -154,7 +152,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN), uap->port.membase + UART010_LCRH); -@@ -387,7 +386,7 @@ pl010_set_termios(struct uart_port *port +@@ -387,7 +386,7 @@ /* * Ask the core to calculate the divisor for us. */ @@ -163,7 +161,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c quot = uart_get_divisor(port, baud); switch (termios->c_cflag & CSIZE) { -@@ -450,7 +449,7 @@ pl010_set_termios(struct uart_port *port +@@ -450,7 +449,7 @@ uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX; /* first, disable everything */ @@ -172,7 +170,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c if (UART_ENABLE_MS(port, termios->c_cflag)) old_cr |= UART010_CR_MSIE; -@@ -540,7 +539,7 @@ static struct uart_ops amba_pl010_pops = +@@ -540,7 +539,7 @@ .verify_port = pl010_verify_port, }; @@ -181,7 +179,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE -@@ -550,7 +549,7 @@ static void pl010_console_putchar(struct +@@ -550,7 +549,7 @@ unsigned int status; do { @@ -190,7 +188,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c barrier(); } while (!UART_TX_READY(status)); writel(ch, uap->port.membase + UART01x_DR); -@@ -567,7 +566,7 @@ pl010_console_write(struct console *co, +@@ -567,7 +566,7 @@ /* * First save the CR then disable the interrupts */ @@ -199,7 +197,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR); uart_console_write(&uap->port, s, count, pl010_console_putchar); -@@ -577,7 +576,7 @@ pl010_console_write(struct console *co, +@@ -577,7 +576,7 @@ * and restore the TCR */ do { @@ -208,7 +206,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c barrier(); } while (status & UART01x_FR_BUSY); writel(old_cr, uap->port.membase + UART010_CR); -@@ -589,9 +588,9 @@ static void __init +@@ -589,9 +588,9 @@ pl010_console_get_options(struct uart_amba_port *uap, int *baud, int *parity, int *bits) { @@ -220,7 +218,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c *parity = 'n'; if (lcr_h & UART01x_LCRH_PEN) { -@@ -606,8 +605,8 @@ pl010_console_get_options(struct uart_am +@@ -606,8 +605,8 @@ else *bits = 8; @@ -231,7 +229,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c *baud = uap->port.uartclk / (16 * (quot + 1)); } } -@@ -625,7 +624,7 @@ static int __init pl010_console_setup(st +@@ -625,7 +624,7 @@ * if so, search for the first available port that does have * console support. */ @@ -240,7 +238,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c co->index = 0; uap = amba_ports[co->index]; if (!uap) -@@ -643,7 +642,7 @@ static int __init pl010_console_setup(st +@@ -643,7 +642,7 @@ static struct uart_driver amba_reg; static struct console amba_console = { @@ -249,7 +247,7 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c .write = pl010_console_write, .device = uart_console_device, .setup = pl010_console_setup, -@@ -659,11 +658,11 @@ static struct console amba_console = { +@@ -659,11 +658,11 @@ static struct uart_driver amba_reg = { .owner = THIS_MODULE, @@ -264,11 +262,9 @@ Index: linux-2.6.25.4/drivers/serial/amba-pl010.c .cons = AMBA_CONSOLE, }; -Index: linux-2.6.25.4/drivers/serial/Kconfig -=================================================================== ---- linux-2.6.25.4.orig/drivers/serial/Kconfig -+++ linux-2.6.25.4/drivers/serial/Kconfig -@@ -287,10 +287,25 @@ config SERIAL_AMBA_PL010 +--- a/drivers/serial/Kconfig ++++ b/drivers/serial/Kconfig +@@ -287,10 +287,25 @@ help This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have an Integrator/AP or Integrator/PP2 platform, or if you have a diff --git a/target/linux/adm5120/patches-2.6.25/201-amba_bus_hacks.patch b/target/linux/adm5120/patches-2.6.25/201-amba_bus_hacks.patch index b0881fbe7c..299f216523 100644 --- a/target/linux/adm5120/patches-2.6.25/201-amba_bus_hacks.patch +++ b/target/linux/adm5120/patches-2.6.25/201-amba_bus_hacks.patch @@ -1,7 +1,5 @@ -Index: linux-2.6.25.4/drivers/amba/bus.c -=================================================================== ---- linux-2.6.25.4.orig/drivers/amba/bus.c -+++ linux-2.6.25.4/drivers/amba/bus.c +--- a/drivers/amba/bus.c ++++ b/drivers/amba/bus.c @@ -17,6 +17,10 @@ #include #include diff --git a/target/linux/adm5120/patches-2.6.25/202-pci_disable_common_quirks.patch b/target/linux/adm5120/patches-2.6.25/202-pci_disable_common_quirks.patch index 59db560313..25149885a5 100644 --- a/target/linux/adm5120/patches-2.6.25/202-pci_disable_common_quirks.patch +++ b/target/linux/adm5120/patches-2.6.25/202-pci_disable_common_quirks.patch @@ -1,8 +1,6 @@ -Index: linux-2.6.25.4/drivers/pci/Kconfig -=================================================================== ---- linux-2.6.25.4.orig/drivers/pci/Kconfig -+++ linux-2.6.25.4/drivers/pci/Kconfig -@@ -42,6 +42,12 @@ config PCI_DEBUG +--- a/drivers/pci/Kconfig ++++ b/drivers/pci/Kconfig +@@ -42,6 +42,12 @@ When in doubt, say N. @@ -15,10 +13,8 @@ Index: linux-2.6.25.4/drivers/pci/Kconfig config HT_IRQ bool "Interrupts on hypertransport devices" default y -Index: linux-2.6.25.4/drivers/pci/quirks.c -=================================================================== ---- linux-2.6.25.4.orig/drivers/pci/quirks.c -+++ linux-2.6.25.4/drivers/pci/quirks.c +--- a/drivers/pci/quirks.c ++++ b/drivers/pci/quirks.c @@ -24,6 +24,7 @@ #include #include "pci.h" @@ -27,7 +23,7 @@ Index: linux-2.6.25.4/drivers/pci/quirks.c /* The Mellanox Tavor device gives false positive parity errors * Mark this device with a broken_parity_status, to allow * PCI scanning code to "skip" this now blacklisted device. -@@ -1495,6 +1496,7 @@ static void __devinit fixup_rev1_53c810( +@@ -1495,6 +1496,7 @@ } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810); @@ -35,7 +31,7 @@ Index: linux-2.6.25.4/drivers/pci/quirks.c static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end) { -@@ -1562,6 +1564,7 @@ void pci_fixup_device(enum pci_fixup_pas +@@ -1562,6 +1564,7 @@ } EXPORT_SYMBOL(pci_fixup_device); @@ -43,7 +39,7 @@ Index: linux-2.6.25.4/drivers/pci/quirks.c /* Enable 1k I/O space granularity on the Intel P64H2 */ static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev) { -@@ -1875,3 +1878,4 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AT +@@ -1875,3 +1878,4 @@ quirk_msi_intx_disable_bug); #endif /* CONFIG_PCI_MSI */ diff --git a/target/linux/adm5120/patches-2.6.25/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches-2.6.25/203-gpio_leds_brightness.patch index b5e45c87f6..06394da295 100644 --- a/target/linux/adm5120/patches-2.6.25/203-gpio_leds_brightness.patch +++ b/target/linux/adm5120/patches-2.6.25/203-gpio_leds_brightness.patch @@ -1,8 +1,6 @@ -Index: linux-2.6.25.4/drivers/leds/leds-gpio.c -=================================================================== ---- linux-2.6.25.4.orig/drivers/leds/leds-gpio.c -+++ linux-2.6.25.4/drivers/leds/leds-gpio.c -@@ -41,13 +41,17 @@ static void gpio_led_set(struct led_clas +--- a/drivers/leds/leds-gpio.c ++++ b/drivers/leds/leds-gpio.c +@@ -41,13 +41,17 @@ container_of(led_cdev, struct gpio_led_data, cdev); int level; diff --git a/target/linux/adm5120/patches-2.6.25/310-adm5120_wdt.patch b/target/linux/adm5120/patches-2.6.25/310-adm5120_wdt.patch index 4b4c54a70b..78eb62862d 100644 --- a/target/linux/adm5120/patches-2.6.25/310-adm5120_wdt.patch +++ b/target/linux/adm5120/patches-2.6.25/310-adm5120_wdt.patch @@ -1,8 +1,6 @@ -Index: linux-2.6.25.4/drivers/watchdog/Kconfig -=================================================================== ---- linux-2.6.25.4.orig/drivers/watchdog/Kconfig -+++ linux-2.6.25.4/drivers/watchdog/Kconfig -@@ -619,6 +619,18 @@ config SBC_EPX_C3_WATCHDOG +--- a/drivers/watchdog/Kconfig ++++ b/drivers/watchdog/Kconfig +@@ -619,6 +619,18 @@ # MIPS Architecture @@ -21,11 +19,9 @@ Index: linux-2.6.25.4/drivers/watchdog/Kconfig config INDYDOG tristate "Indy/I2 Hardware Watchdog" depends on SGI_HAS_INDYDOG -Index: linux-2.6.25.4/drivers/watchdog/Makefile -=================================================================== ---- linux-2.6.25.4.orig/drivers/watchdog/Makefile -+++ linux-2.6.25.4/drivers/watchdog/Makefile -@@ -90,6 +90,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc +--- a/drivers/watchdog/Makefile ++++ b/drivers/watchdog/Makefile +@@ -90,6 +90,7 @@ # M68KNOMMU Architecture # MIPS Architecture diff --git a/target/linux/adm5120/patches-2.6.25/900-usb_bump_version_number.patch b/target/linux/adm5120/patches-2.6.25/900-usb_bump_version_number.patch index c9a59be4ca..d15c89c00b 100644 --- a/target/linux/adm5120/patches-2.6.25/900-usb_bump_version_number.patch +++ b/target/linux/adm5120/patches-2.6.25/900-usb_bump_version_number.patch @@ -1,7 +1,5 @@ -Index: linux-2.6.25.4/drivers/usb/host/adm5120-hcd.c -=================================================================== ---- linux-2.6.25.4.orig/drivers/usb/host/adm5120-hcd.c -+++ linux-2.6.25.4/drivers/usb/host/adm5120-hcd.c +--- a/drivers/usb/host/adm5120-hcd.c ++++ b/drivers/usb/host/adm5120-hcd.c @@ -45,7 +45,7 @@ #include "../core/hcd.h" #include "../core/hub.h" diff --git a/target/linux/adm5120/patches-2.6.25/901-usb_convert_from_class_device.patch b/target/linux/adm5120/patches-2.6.25/901-usb_convert_from_class_device.patch index 5f4d087e2f..da868ccbab 100644 --- a/target/linux/adm5120/patches-2.6.25/901-usb_convert_from_class_device.patch +++ b/target/linux/adm5120/patches-2.6.25/901-usb_convert_from_class_device.patch @@ -1,8 +1,6 @@ -Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c -=================================================================== ---- linux-2.6.25.4.orig/drivers/usb/host/adm5120-dbg.c -+++ linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c -@@ -456,7 +456,7 @@ show_list(struct admhcd *ahcd, char *buf +--- a/drivers/usb/host/adm5120-dbg.c ++++ b/drivers/usb/host/adm5120-dbg.c +@@ -456,7 +456,7 @@ } static ssize_t @@ -11,7 +9,7 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c { struct usb_bus *bus; struct usb_hcd *hcd; -@@ -464,7 +464,7 @@ show_async(struct class_device *class_de +@@ -464,7 +464,7 @@ size_t temp; unsigned long flags; @@ -20,7 +18,7 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c hcd = bus_to_hcd(bus); ahcd = hcd_to_admhcd(hcd); -@@ -475,13 +475,13 @@ show_async(struct class_device *class_de +@@ -475,13 +475,13 @@ return temp; } @@ -36,7 +34,7 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c { struct usb_bus *bus; struct usb_hcd *hcd; -@@ -496,7 +496,7 @@ show_periodic(struct class_device *class +@@ -496,7 +496,7 @@ return 0; seen_count = 0; @@ -45,7 +43,7 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c hcd = bus_to_hcd(bus); ahcd = hcd_to_admhcd(hcd); next = buf; -@@ -574,13 +574,13 @@ show_periodic(struct class_device *class +@@ -574,13 +574,13 @@ return PAGE_SIZE - size; } @@ -61,7 +59,7 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c { struct usb_bus *bus; struct usb_hcd *hcd; -@@ -591,7 +591,7 @@ show_registers(struct class_device *clas +@@ -591,7 +591,7 @@ char *next; u32 rdata; @@ -70,7 +68,7 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c hcd = bus_to_hcd(bus); ahcd = hcd_to_admhcd(hcd); regs = ahcd->regs; -@@ -656,27 +656,27 @@ done: +@@ -656,27 +656,27 @@ spin_unlock_irqrestore(&ahcd->lock, flags); return PAGE_SIZE - size; } diff --git a/target/linux/adm5120/patches-2.6.25/902-usb_use_debugfs_instead_of_sysfs.patch b/target/linux/adm5120/patches-2.6.25/902-usb_use_debugfs_instead_of_sysfs.patch index 88688ea6eb..5b513c0f66 100644 --- a/target/linux/adm5120/patches-2.6.25/902-usb_use_debugfs_instead_of_sysfs.patch +++ b/target/linux/adm5120/patches-2.6.25/902-usb_use_debugfs_instead_of_sysfs.patch @@ -1,8 +1,6 @@ -Index: linux-2.6.25.4/drivers/usb/host/adm5120.h -=================================================================== ---- linux-2.6.25.4.orig/drivers/usb/host/adm5120.h -+++ linux-2.6.25.4/drivers/usb/host/adm5120.h -@@ -431,6 +431,13 @@ struct admhcd { +--- a/drivers/usb/host/adm5120.h ++++ b/drivers/usb/host/adm5120.h +@@ -431,6 +431,13 @@ #define OHCI_QUIRK_BE_MMIO 0x10 /* BE registers */ #define OHCI_QUIRK_ZFMICRO 0x20 /* Compaq ZFMicro chipset*/ // there are also chip quirks/bugs in init logic @@ -16,10 +14,8 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120.h }; /* convert between an hcd pointer and the corresponding ahcd_hcd */ -Index: linux-2.6.25.4/drivers/usb/host/adm5120-hcd.c -=================================================================== ---- linux-2.6.25.4.orig/drivers/usb/host/adm5120-hcd.c -+++ linux-2.6.25.4/drivers/usb/host/adm5120-hcd.c +--- a/drivers/usb/host/adm5120-hcd.c ++++ b/drivers/usb/host/adm5120-hcd.c @@ -35,6 +35,7 @@ #include #include @@ -28,7 +24,7 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-hcd.c #include #include -@@ -799,6 +800,14 @@ static int __init admhc_hcd_mod_init(voi +@@ -804,6 +805,14 @@ pr_info("%s: block sizes: ed %Zd td %Zd\n", hcd_name, sizeof (struct ed), sizeof (struct td)); @@ -43,7 +39,7 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-hcd.c #ifdef PLATFORM_DRIVER ret = platform_driver_register(&PLATFORM_DRIVER); if (ret < 0) -@@ -811,6 +820,12 @@ static int __init admhc_hcd_mod_init(voi +@@ -816,6 +825,12 @@ platform_driver_unregister(&PLATFORM_DRIVER); error_platform: #endif @@ -56,7 +52,7 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-hcd.c return ret; } module_init(admhc_hcd_mod_init); -@@ -818,6 +833,9 @@ module_init(admhc_hcd_mod_init); +@@ -823,6 +838,9 @@ static void __exit admhc_hcd_mod_exit(void) { platform_driver_unregister(&PLATFORM_DRIVER); @@ -66,11 +62,9 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-hcd.c } module_exit(admhc_hcd_mod_exit); -Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c -=================================================================== ---- linux-2.6.25.4.orig/drivers/usb/host/adm5120-dbg.c -+++ linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c -@@ -390,6 +390,42 @@ static inline void remove_debug_files(st +--- a/drivers/usb/host/adm5120-dbg.c ++++ b/drivers/usb/host/adm5120-dbg.c +@@ -390,6 +390,42 @@ #else @@ -113,7 +107,7 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c static ssize_t show_list(struct admhcd *ahcd, char *buf, size_t count, struct ed *ed) { -@@ -455,8 +491,7 @@ show_list(struct admhcd *ahcd, char *buf +@@ -455,8 +491,7 @@ return count - size; } @@ -123,7 +117,7 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c { struct usb_bus *bus; struct usb_hcd *hcd; -@@ -464,24 +499,22 @@ show_async(struct device *dev, struct de +@@ -464,24 +499,22 @@ size_t temp; unsigned long flags; @@ -151,7 +145,7 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c { struct usb_bus *bus; struct usb_hcd *hcd; -@@ -496,10 +529,10 @@ show_periodic(struct device *dev, struct +@@ -496,10 +529,10 @@ return 0; seen_count = 0; @@ -164,7 +158,7 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c size = PAGE_SIZE; temp = scnprintf(next, size, "size = %d\n", NUM_INTS); -@@ -574,13 +607,11 @@ show_periodic(struct device *dev, struct +@@ -574,13 +607,11 @@ return PAGE_SIZE - size; } @@ -179,7 +173,7 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c { struct usb_bus *bus; struct usb_hcd *hcd; -@@ -591,11 +622,11 @@ show_registers(struct device *dev, struc +@@ -591,11 +622,11 @@ char *next; u32 rdata; @@ -193,7 +187,7 @@ Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c size = PAGE_SIZE; spin_lock_irqsave(&ahcd->lock, flags); -@@ -656,27 +687,154 @@ done: +@@ -656,27 +687,154 @@ spin_unlock_irqrestore(&ahcd->lock, flags); return PAGE_SIZE - size; } diff --git a/target/linux/adm5120/patches-2.6.25/910-pata_rb153_cf_fix_compiler_warning.patch b/target/linux/adm5120/patches-2.6.25/910-pata_rb153_cf_fix_compiler_warning.patch index b99ddc8e78..27ae067d90 100644 --- a/target/linux/adm5120/patches-2.6.25/910-pata_rb153_cf_fix_compiler_warning.patch +++ b/target/linux/adm5120/patches-2.6.25/910-pata_rb153_cf_fix_compiler_warning.patch @@ -1,8 +1,6 @@ -Index: linux-2.6.25.4/drivers/ata/pata_rb153_cf.c -=================================================================== ---- linux-2.6.25.4.orig/drivers/ata/pata_rb153_cf.c -+++ linux-2.6.25.4/drivers/ata/pata_rb153_cf.c -@@ -68,20 +68,23 @@ static void rb153_pata_exec_command(stru +--- a/drivers/ata/pata_rb153_cf.c ++++ b/drivers/ata/pata_rb153_cf.c +@@ -68,20 +68,23 @@ rb153_pata_finish_io(ap); } diff --git a/target/linux/adm5120/patches/001-adm5120.patch b/target/linux/adm5120/patches/001-adm5120.patch index 9280271800..26c0265049 100644 --- a/target/linux/adm5120/patches/001-adm5120.patch +++ b/target/linux/adm5120/patches/001-adm5120.patch @@ -1,8 +1,6 @@ -Index: linux-2.6.24.7/arch/mips/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/arch/mips/Kconfig -+++ linux-2.6.24.7/arch/mips/Kconfig -@@ -16,6 +16,20 @@ choice +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -16,6 +16,20 @@ prompt "System type" default SGI_IP22 @@ -23,7 +21,7 @@ Index: linux-2.6.24.7/arch/mips/Kconfig config MACH_ALCHEMY bool "Alchemy processor based machines" -@@ -689,6 +703,7 @@ config WR_PPMC +@@ -689,6 +703,7 @@ endchoice @@ -31,11 +29,9 @@ Index: linux-2.6.24.7/arch/mips/Kconfig source "arch/mips/au1000/Kconfig" source "arch/mips/jazz/Kconfig" source "arch/mips/lasat/Kconfig" -Index: linux-2.6.24.7/arch/mips/Makefile -=================================================================== ---- linux-2.6.24.7.orig/arch/mips/Makefile -+++ linux-2.6.24.7/arch/mips/Makefile -@@ -166,6 +166,16 @@ cflags-$(CONFIG_MACH_JAZZ) += -Iinclude/ +--- a/arch/mips/Makefile ++++ b/arch/mips/Makefile +@@ -166,6 +166,16 @@ load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000 # @@ -52,10 +48,8 @@ Index: linux-2.6.24.7/arch/mips/Makefile # Common Alchemy Au1x00 stuff # core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/ -Index: linux-2.6.24.7/include/asm-mips/bootinfo.h -=================================================================== ---- linux-2.6.24.7.orig/include/asm-mips/bootinfo.h -+++ linux-2.6.24.7/include/asm-mips/bootinfo.h +--- a/include/asm-mips/bootinfo.h ++++ b/include/asm-mips/bootinfo.h @@ -198,6 +198,58 @@ #define MACH_GROUP_BRCM 23 /* Broadcom */ #define MACH_BCM47XX 1 /* Broadcom BCM47XX */ diff --git a/target/linux/adm5120/patches/002-adm5120_flash.patch b/target/linux/adm5120/patches/002-adm5120_flash.patch index a81ccde50c..d2326fa959 100644 --- a/target/linux/adm5120/patches/002-adm5120_flash.patch +++ b/target/linux/adm5120/patches/002-adm5120_flash.patch @@ -1,8 +1,6 @@ -Index: linux-2.6.24.7/drivers/mtd/maps/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/drivers/mtd/maps/Kconfig -+++ linux-2.6.24.7/drivers/mtd/maps/Kconfig -@@ -597,5 +597,9 @@ config MTD_PLATRAM +--- a/drivers/mtd/maps/Kconfig ++++ b/drivers/mtd/maps/Kconfig +@@ -597,5 +597,9 @@ This selection automatically selects the map_ram driver. @@ -12,11 +10,9 @@ Index: linux-2.6.24.7/drivers/mtd/maps/Kconfig + endmenu -Index: linux-2.6.24.7/drivers/mtd/maps/Makefile -=================================================================== ---- linux-2.6.24.7.orig/drivers/mtd/maps/Makefile -+++ linux-2.6.24.7/drivers/mtd/maps/Makefile -@@ -45,6 +45,7 @@ obj-$(CONFIG_MTD_DBOX2) += dbox2-flash. +--- a/drivers/mtd/maps/Makefile ++++ b/drivers/mtd/maps/Makefile +@@ -45,6 +45,7 @@ obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o obj-$(CONFIG_MTD_PCI) += pci.o obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o diff --git a/target/linux/adm5120/patches/003-adm5120_switch.patch b/target/linux/adm5120/patches/003-adm5120_switch.patch index 7694eb0b31..1d2e428dde 100644 --- a/target/linux/adm5120/patches/003-adm5120_switch.patch +++ b/target/linux/adm5120/patches/003-adm5120_switch.patch @@ -1,8 +1,6 @@ -Index: linux-2.6.24.7/drivers/net/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/drivers/net/Kconfig -+++ linux-2.6.24.7/drivers/net/Kconfig -@@ -601,6 +601,10 @@ config MIPS_AU1X00_ENET +--- a/drivers/net/Kconfig ++++ b/drivers/net/Kconfig +@@ -601,6 +601,10 @@ If you have an Alchemy Semi AU1X00 based system say Y. Otherwise, say N. @@ -13,11 +11,9 @@ Index: linux-2.6.24.7/drivers/net/Kconfig config SGI_IOC3_ETH bool "SGI IOC3 Ethernet" depends on PCI && SGI_IP27 -Index: linux-2.6.24.7/drivers/net/Makefile -=================================================================== ---- linux-2.6.24.7.orig/drivers/net/Makefile -+++ linux-2.6.24.7/drivers/net/Makefile -@@ -183,6 +183,7 @@ obj-$(CONFIG_SC92031) += sc92031.o +--- a/drivers/net/Makefile ++++ b/drivers/net/Makefile +@@ -183,6 +183,7 @@ # This is also a 82596 and should probably be merged obj-$(CONFIG_LP486E) += lp486e.o diff --git a/target/linux/adm5120/patches/005-adm5120_usb.patch b/target/linux/adm5120/patches/005-adm5120_usb.patch index ddb4a3df8f..ef9a4fd9d3 100644 --- a/target/linux/adm5120/patches/005-adm5120_usb.patch +++ b/target/linux/adm5120/patches/005-adm5120_usb.patch @@ -1,19 +1,15 @@ -Index: linux-2.6.24.7/drivers/usb/host/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/drivers/usb/host/Kconfig -+++ linux-2.6.24.7/drivers/usb/host/Kconfig -@@ -261,3 +261,6 @@ config USB_R8A66597_HCD +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -261,3 +261,6 @@ To compile this driver as a module, choose M here: the module will be called r8a66597-hcd. +config USB_ADM5120_HCD + tristate "ADM5120 HCD support (EXPERIMENTAL)" + depends on USB && MIPS_ADM5120 && EXPERIMENTAL -Index: linux-2.6.24.7/drivers/usb/host/Makefile -=================================================================== ---- linux-2.6.24.7.orig/drivers/usb/host/Makefile -+++ linux-2.6.24.7/drivers/usb/host/Makefile -@@ -8,6 +8,7 @@ endif +--- a/drivers/usb/host/Makefile ++++ b/drivers/usb/host/Makefile +@@ -8,6 +8,7 @@ obj-$(CONFIG_PCI) += pci-quirks.o @@ -21,11 +17,9 @@ Index: linux-2.6.24.7/drivers/usb/host/Makefile obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o -Index: linux-2.6.24.7/drivers/usb/Makefile -=================================================================== ---- linux-2.6.24.7.orig/drivers/usb/Makefile -+++ linux-2.6.24.7/drivers/usb/Makefile -@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD) += host/ +--- a/drivers/usb/Makefile ++++ b/drivers/usb/Makefile +@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_SL811_HCD) += host/ obj-$(CONFIG_USB_U132_HCD) += host/ obj-$(CONFIG_USB_R8A66597_HCD) += host/ diff --git a/target/linux/adm5120/patches/006-adm5120_leds.patch b/target/linux/adm5120/patches/006-adm5120_leds.patch index fc4943401e..6c8886da5c 100644 --- a/target/linux/adm5120/patches/006-adm5120_leds.patch +++ b/target/linux/adm5120/patches/006-adm5120_leds.patch @@ -1,8 +1,6 @@ -Index: linux-2.6.24.7/drivers/leds/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/drivers/leds/Kconfig -+++ linux-2.6.24.7/drivers/leds/Kconfig -@@ -18,6 +18,21 @@ config LEDS_CLASS +--- a/drivers/leds/Kconfig ++++ b/drivers/leds/Kconfig +@@ -18,6 +18,21 @@ comment "LED drivers" @@ -24,11 +22,9 @@ Index: linux-2.6.24.7/drivers/leds/Kconfig config LEDS_CORGI tristate "LED Support for the Sharp SL-C7x0 series" depends on LEDS_CLASS && PXA_SHARP_C7xx -Index: linux-2.6.24.7/drivers/leds/Makefile -=================================================================== ---- linux-2.6.24.7.orig/drivers/leds/Makefile -+++ linux-2.6.24.7/drivers/leds/Makefile -@@ -5,6 +5,7 @@ obj-$(CONFIG_LEDS_CLASS) += led-class.o +--- a/drivers/leds/Makefile ++++ b/drivers/leds/Makefile +@@ -5,6 +5,7 @@ obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o # LED Platform Drivers diff --git a/target/linux/adm5120/patches/007-adm5120_pci.patch b/target/linux/adm5120/patches/007-adm5120_pci.patch index 2d6903cd3e..540b7d90ec 100644 --- a/target/linux/adm5120/patches/007-adm5120_pci.patch +++ b/target/linux/adm5120/patches/007-adm5120_pci.patch @@ -1,16 +1,12 @@ -Index: linux-2.6.24.7/arch/mips/pci/Makefile -=================================================================== ---- linux-2.6.24.7.orig/arch/mips/pci/Makefile -+++ linux-2.6.24.7/arch/mips/pci/Makefile -@@ -48,3 +48,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup- +--- a/arch/mips/pci/Makefile ++++ b/arch/mips/pci/Makefile +@@ -48,3 +48,4 @@ obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o +obj-$(CONFIG_PCI_ADM5120) += pci-adm5120.o -Index: linux-2.6.24.7/include/linux/pci_ids.h -=================================================================== ---- linux-2.6.24.7.orig/include/linux/pci_ids.h -+++ linux-2.6.24.7/include/linux/pci_ids.h +--- a/include/linux/pci_ids.h ++++ b/include/linux/pci_ids.h @@ -1703,6 +1703,9 @@ #define PCI_VENDOR_ID_ESDGMBH 0x12fe #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111 diff --git a/target/linux/adm5120/patches/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches/009-adm5120_leds_switch_trigger.patch index cf10f7963c..bb04038753 100644 --- a/target/linux/adm5120/patches/009-adm5120_leds_switch_trigger.patch +++ b/target/linux/adm5120/patches/009-adm5120_leds_switch_trigger.patch @@ -1,8 +1,6 @@ -Index: linux-2.6.24.7/drivers/leds/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/drivers/leds/Kconfig -+++ linux-2.6.24.7/drivers/leds/Kconfig -@@ -178,4 +178,12 @@ config LEDS_TRIGGER_DEFAULT_ON +--- a/drivers/leds/Kconfig ++++ b/drivers/leds/Kconfig +@@ -178,4 +178,12 @@ This allows LEDs to be initialised in the ON state. If unsure, say Y. @@ -15,11 +13,9 @@ Index: linux-2.6.24.7/drivers/leds/Kconfig + If unsure, say N. + endif # NEW_LEDS -Index: linux-2.6.24.7/drivers/leds/Makefile -=================================================================== ---- linux-2.6.24.7.orig/drivers/leds/Makefile -+++ linux-2.6.24.7/drivers/leds/Makefile -@@ -28,3 +28,4 @@ obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK) += l +--- a/drivers/leds/Makefile ++++ b/drivers/leds/Makefile +@@ -28,3 +28,4 @@ obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o diff --git a/target/linux/adm5120/patches/100-mtd_myloder_partition_parser.patch b/target/linux/adm5120/patches/100-mtd_myloder_partition_parser.patch index 47166ed3cb..fe9c45b092 100644 --- a/target/linux/adm5120/patches/100-mtd_myloder_partition_parser.patch +++ b/target/linux/adm5120/patches/100-mtd_myloder_partition_parser.patch @@ -1,8 +1,6 @@ -Index: linux-2.6.24.7/drivers/mtd/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/drivers/mtd/Kconfig -+++ linux-2.6.24.7/drivers/mtd/Kconfig -@@ -160,6 +160,22 @@ config MTD_AFS_PARTS +--- a/drivers/mtd/Kconfig ++++ b/drivers/mtd/Kconfig +@@ -160,6 +160,22 @@ for your particular device. It won't happen automatically. The 'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example. @@ -25,11 +23,9 @@ Index: linux-2.6.24.7/drivers/mtd/Kconfig comment "User Modules And Translation Layers" config MTD_CHAR -Index: linux-2.6.24.7/drivers/mtd/Makefile -=================================================================== ---- linux-2.6.24.7.orig/drivers/mtd/Makefile -+++ linux-2.6.24.7/drivers/mtd/Makefile -@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o +--- a/drivers/mtd/Makefile ++++ b/drivers/mtd/Makefile +@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o obj-$(CONFIG_MTD_AFS_PARTS) += afs.o diff --git a/target/linux/adm5120/patches/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches/101-cfi_fixup_macronix_bootloc.patch index 859b5ca01a..9acb626bb5 100644 --- a/target/linux/adm5120/patches/101-cfi_fixup_macronix_bootloc.patch +++ b/target/linux/adm5120/patches/101-cfi_fixup_macronix_bootloc.patch @@ -1,7 +1,5 @@ -Index: linux-2.6.24.7/drivers/mtd/chips/cfi_cmdset_0002.c -=================================================================== ---- linux-2.6.24.7.orig/drivers/mtd/chips/cfi_cmdset_0002.c -+++ linux-2.6.24.7/drivers/mtd/chips/cfi_cmdset_0002.c +--- a/drivers/mtd/chips/cfi_cmdset_0002.c ++++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -47,12 +47,19 @@ #define MANUFACTURER_AMD 0x0001 #define MANUFACTURER_ATMEL 0x001F @@ -22,7 +20,7 @@ Index: linux-2.6.24.7/drivers/mtd/chips/cfi_cmdset_0002.c static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); -@@ -217,6 +224,41 @@ static void fixup_use_atmel_lock(struct +@@ -217,6 +224,41 @@ mtd->flags |= MTD_STUPID_LOCK; } @@ -64,7 +62,7 @@ Index: linux-2.6.24.7/drivers/mtd/chips/cfi_cmdset_0002.c static struct cfi_fixup cfi_fixup_table[] = { #ifdef AMD_BOOTLOC_BUG { CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL }, -@@ -231,6 +273,9 @@ static struct cfi_fixup cfi_fixup_table[ +@@ -231,6 +273,9 @@ { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, }, #endif { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL }, @@ -74,11 +72,9 @@ Index: linux-2.6.24.7/drivers/mtd/chips/cfi_cmdset_0002.c { 0, 0, NULL, NULL } }; static struct cfi_fixup jedec_fixup_table[] = { -Index: linux-2.6.24.7/drivers/mtd/chips/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/drivers/mtd/chips/Kconfig -+++ linux-2.6.24.7/drivers/mtd/chips/Kconfig -@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD +--- a/drivers/mtd/chips/Kconfig ++++ b/drivers/mtd/chips/Kconfig +@@ -196,6 +196,14 @@ provides support for one of those command sets, used on chips including the AMD Am29LV320. diff --git a/target/linux/adm5120/patches/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches/102-jedec_pmc_39lvxxx_chips.patch index 14c675cd91..0c512ea6a4 100644 --- a/target/linux/adm5120/patches/102-jedec_pmc_39lvxxx_chips.patch +++ b/target/linux/adm5120/patches/102-jedec_pmc_39lvxxx_chips.patch @@ -1,7 +1,5 @@ -Index: linux-2.6.24.7/drivers/mtd/chips/jedec_probe.c -=================================================================== ---- linux-2.6.24.7.orig/drivers/mtd/chips/jedec_probe.c -+++ linux-2.6.24.7/drivers/mtd/chips/jedec_probe.c +--- a/drivers/mtd/chips/jedec_probe.c ++++ b/drivers/mtd/chips/jedec_probe.c @@ -121,6 +121,10 @@ #define UPD29F064115 0x221C @@ -13,7 +11,7 @@ Index: linux-2.6.24.7/drivers/mtd/chips/jedec_probe.c #define PM49FL002 0x006D #define PM49FL004 0x006E #define PM49FL008 0x006A -@@ -1264,6 +1268,58 @@ static const struct amd_flash_info jedec +@@ -1264,6 +1268,58 @@ ERASEINFO(0x02000,2), ERASEINFO(0x04000,1), } diff --git a/target/linux/adm5120/patches/103-mtd_trxsplit.patch b/target/linux/adm5120/patches/103-mtd_trxsplit.patch index 73df926f74..267293aa56 100644 --- a/target/linux/adm5120/patches/103-mtd_trxsplit.patch +++ b/target/linux/adm5120/patches/103-mtd_trxsplit.patch @@ -1,8 +1,6 @@ -Index: linux-2.6.24.7/drivers/mtd/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/drivers/mtd/Kconfig -+++ linux-2.6.24.7/drivers/mtd/Kconfig -@@ -57,6 +57,11 @@ config MTD_ROOTFS_SPLIT +--- a/drivers/mtd/Kconfig ++++ b/drivers/mtd/Kconfig +@@ -57,6 +57,11 @@ depends on MTD_PARTITIONS default y @@ -14,11 +12,9 @@ Index: linux-2.6.24.7/drivers/mtd/Kconfig config MTD_REDBOOT_PARTS tristate "RedBoot partition table parsing" depends on MTD_PARTITIONS -Index: linux-2.6.24.7/drivers/mtd/Makefile -=================================================================== ---- linux-2.6.24.7.orig/drivers/mtd/Makefile -+++ linux-2.6.24.7/drivers/mtd/Makefile -@@ -8,6 +8,7 @@ mtd-y := mtdcore.o mtdsuper.o +--- a/drivers/mtd/Makefile ++++ b/drivers/mtd/Makefile +@@ -8,6 +8,7 @@ mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.o obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o diff --git a/target/linux/adm5120/patches/120-rb153_cf_driver.patch b/target/linux/adm5120/patches/120-rb153_cf_driver.patch index 0e9ddacdac..ad07b7a8a7 100644 --- a/target/linux/adm5120/patches/120-rb153_cf_driver.patch +++ b/target/linux/adm5120/patches/120-rb153_cf_driver.patch @@ -1,8 +1,6 @@ -Index: linux-2.6.24.7/drivers/ata/Makefile -=================================================================== ---- linux-2.6.24.7.orig/drivers/ata/Makefile -+++ linux-2.6.24.7/drivers/ata/Makefile -@@ -69,6 +69,7 @@ obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o +--- a/drivers/ata/Makefile ++++ b/drivers/ata/Makefile +@@ -69,6 +69,7 @@ obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o @@ -10,11 +8,9 @@ Index: linux-2.6.24.7/drivers/ata/Makefile # Should be last but two libata driver obj-$(CONFIG_PATA_ACPI) += pata_acpi.o # Should be last but one libata driver -Index: linux-2.6.24.7/drivers/ata/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/drivers/ata/Kconfig -+++ linux-2.6.24.7/drivers/ata/Kconfig -@@ -660,4 +660,13 @@ config PATA_BF54X +--- a/drivers/ata/Kconfig ++++ b/drivers/ata/Kconfig +@@ -660,4 +660,13 @@ If unsure, say N. diff --git a/target/linux/adm5120/patches/140-cmdline_hack.patch b/target/linux/adm5120/patches/140-cmdline_hack.patch index b366129c56..1ced3f62dd 100644 --- a/target/linux/adm5120/patches/140-cmdline_hack.patch +++ b/target/linux/adm5120/patches/140-cmdline_hack.patch @@ -1,7 +1,5 @@ -Index: linux-2.6.24.7/arch/mips/kernel/head.S -=================================================================== ---- linux-2.6.24.7.orig/arch/mips/kernel/head.S -+++ linux-2.6.24.7/arch/mips/kernel/head.S +--- a/arch/mips/kernel/head.S ++++ b/arch/mips/kernel/head.S @@ -126,7 +126,12 @@ /* * Reserved space for exception handlers. diff --git a/target/linux/adm5120/patches/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches/200-amba_pl010_hacks.patch index 120d1ac316..97b06acec8 100644 --- a/target/linux/adm5120/patches/200-amba_pl010_hacks.patch +++ b/target/linux/adm5120/patches/200-amba_pl010_hacks.patch @@ -1,7 +1,5 @@ -Index: linux-2.6.24.7/drivers/serial/amba-pl010.c -=================================================================== ---- linux-2.6.24.7.orig/drivers/serial/amba-pl010.c -+++ linux-2.6.24.7/drivers/serial/amba-pl010.c +--- a/drivers/serial/amba-pl010.c ++++ b/drivers/serial/amba-pl010.c @@ -52,11 +52,10 @@ #include @@ -16,7 +14,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c #define AMBA_ISR_PASS_LIMIT 256 -@@ -82,7 +81,7 @@ static void pl010_stop_tx(struct uart_po +@@ -82,7 +81,7 @@ struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int cr; @@ -25,7 +23,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c cr &= ~UART010_CR_TIE; writel(cr, uap->port.membase + UART010_CR); } -@@ -92,7 +91,7 @@ static void pl010_start_tx(struct uart_p +@@ -92,7 +91,7 @@ struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int cr; @@ -34,7 +32,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c cr |= UART010_CR_TIE; writel(cr, uap->port.membase + UART010_CR); } -@@ -102,7 +101,7 @@ static void pl010_stop_rx(struct uart_po +@@ -102,7 +101,7 @@ struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int cr; @@ -43,7 +41,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c cr &= ~(UART010_CR_RIE | UART010_CR_RTIE); writel(cr, uap->port.membase + UART010_CR); } -@@ -112,7 +111,7 @@ static void pl010_enable_ms(struct uart_ +@@ -112,7 +111,7 @@ struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int cr; @@ -52,7 +50,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c cr |= UART010_CR_MSIE; writel(cr, uap->port.membase + UART010_CR); } -@@ -122,9 +121,9 @@ static void pl010_rx_chars(struct uart_a +@@ -122,9 +121,9 @@ struct tty_struct *tty = uap->port.info->tty; unsigned int status, ch, flag, rsr, max_count = 256; @@ -64,7 +62,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c flag = TTY_NORMAL; uap->port.icount.rx++; -@@ -133,7 +132,7 @@ static void pl010_rx_chars(struct uart_a +@@ -133,7 +132,7 @@ * Note that the error handling code is * out of the main execution path */ @@ -73,7 +71,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c if (unlikely(rsr & UART01x_RSR_ANY)) { writel(0, uap->port.membase + UART01x_ECR); -@@ -165,7 +164,7 @@ static void pl010_rx_chars(struct uart_a +@@ -165,7 +164,7 @@ uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag); ignore_char: @@ -82,7 +80,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c } spin_unlock(&uap->port.lock); tty_flip_buffer_push(tty); -@@ -210,7 +209,7 @@ static void pl010_modem_status(struct ua +@@ -210,7 +209,7 @@ writel(0, uap->port.membase + UART010_ICR); @@ -91,7 +89,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c delta = status ^ uap->old_status; uap->old_status = status; -@@ -238,7 +237,7 @@ static irqreturn_t pl010_int(int irq, vo +@@ -238,7 +237,7 @@ spin_lock(&uap->port.lock); @@ -100,7 +98,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c if (status) { do { if (status & (UART010_IIR_RTIS | UART010_IIR_RIS)) -@@ -251,7 +250,7 @@ static irqreturn_t pl010_int(int irq, vo +@@ -251,7 +250,7 @@ if (pass_counter-- == 0) break; @@ -109,7 +107,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS | UART010_IIR_TIS)); handled = 1; -@@ -265,7 +264,7 @@ static irqreturn_t pl010_int(int irq, vo +@@ -265,7 +264,7 @@ static unsigned int pl010_tx_empty(struct uart_port *port) { struct uart_amba_port *uap = (struct uart_amba_port *)port; @@ -118,7 +116,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT; } -@@ -275,7 +274,7 @@ static unsigned int pl010_get_mctrl(stru +@@ -275,7 +274,7 @@ unsigned int result = 0; unsigned int status; @@ -127,7 +125,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c if (status & UART01x_FR_DCD) result |= TIOCM_CAR; if (status & UART01x_FR_DSR) -@@ -301,7 +300,7 @@ static void pl010_break_ctl(struct uart_ +@@ -301,7 +300,7 @@ unsigned int lcr_h; spin_lock_irqsave(&uap->port.lock, flags); @@ -136,7 +134,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c if (break_state == -1) lcr_h |= UART01x_LCRH_BRK; else -@@ -334,7 +333,7 @@ static int pl010_startup(struct uart_por +@@ -334,7 +333,7 @@ /* * initialise the old status of the modem signals */ @@ -145,7 +143,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c /* * Finally, enable interrupts -@@ -365,7 +364,7 @@ static void pl010_shutdown(struct uart_p +@@ -365,7 +364,7 @@ writel(0, uap->port.membase + UART010_CR); /* disable break condition and fifos */ @@ -154,7 +152,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN), uap->port.membase + UART010_LCRH); -@@ -387,7 +386,7 @@ pl010_set_termios(struct uart_port *port +@@ -387,7 +386,7 @@ /* * Ask the core to calculate the divisor for us. */ @@ -163,7 +161,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c quot = uart_get_divisor(port, baud); switch (termios->c_cflag & CSIZE) { -@@ -450,7 +449,7 @@ pl010_set_termios(struct uart_port *port +@@ -450,7 +449,7 @@ uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX; /* first, disable everything */ @@ -172,7 +170,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c if (UART_ENABLE_MS(port, termios->c_cflag)) old_cr |= UART010_CR_MSIE; -@@ -540,7 +539,7 @@ static struct uart_ops amba_pl010_pops = +@@ -540,7 +539,7 @@ .verify_port = pl010_verify_port, }; @@ -181,7 +179,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE -@@ -550,7 +549,7 @@ static void pl010_console_putchar(struct +@@ -550,7 +549,7 @@ unsigned int status; do { @@ -190,7 +188,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c barrier(); } while (!UART_TX_READY(status)); writel(ch, uap->port.membase + UART01x_DR); -@@ -567,7 +566,7 @@ pl010_console_write(struct console *co, +@@ -567,7 +566,7 @@ /* * First save the CR then disable the interrupts */ @@ -199,7 +197,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR); uart_console_write(&uap->port, s, count, pl010_console_putchar); -@@ -577,7 +576,7 @@ pl010_console_write(struct console *co, +@@ -577,7 +576,7 @@ * and restore the TCR */ do { @@ -208,7 +206,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c barrier(); } while (status & UART01x_FR_BUSY); writel(old_cr, uap->port.membase + UART010_CR); -@@ -589,9 +588,9 @@ static void __init +@@ -589,9 +588,9 @@ pl010_console_get_options(struct uart_amba_port *uap, int *baud, int *parity, int *bits) { @@ -220,7 +218,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c *parity = 'n'; if (lcr_h & UART01x_LCRH_PEN) { -@@ -606,8 +605,8 @@ pl010_console_get_options(struct uart_am +@@ -606,8 +605,8 @@ else *bits = 8; @@ -231,7 +229,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c *baud = uap->port.uartclk / (16 * (quot + 1)); } } -@@ -625,7 +624,7 @@ static int __init pl010_console_setup(st +@@ -625,7 +624,7 @@ * if so, search for the first available port that does have * console support. */ @@ -240,7 +238,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c co->index = 0; uap = amba_ports[co->index]; if (!uap) -@@ -643,7 +642,7 @@ static int __init pl010_console_setup(st +@@ -643,7 +642,7 @@ static struct uart_driver amba_reg; static struct console amba_console = { @@ -249,7 +247,7 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c .write = pl010_console_write, .device = uart_console_device, .setup = pl010_console_setup, -@@ -659,11 +658,11 @@ static struct console amba_console = { +@@ -659,11 +658,11 @@ static struct uart_driver amba_reg = { .owner = THIS_MODULE, @@ -264,11 +262,9 @@ Index: linux-2.6.24.7/drivers/serial/amba-pl010.c .cons = AMBA_CONSOLE, }; -Index: linux-2.6.24.7/drivers/serial/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/drivers/serial/Kconfig -+++ linux-2.6.24.7/drivers/serial/Kconfig -@@ -287,10 +287,25 @@ config SERIAL_AMBA_PL010 +--- a/drivers/serial/Kconfig ++++ b/drivers/serial/Kconfig +@@ -287,10 +287,25 @@ help This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have an Integrator/AP or Integrator/PP2 platform, or if you have a diff --git a/target/linux/adm5120/patches/201-amba_bus_hacks.patch b/target/linux/adm5120/patches/201-amba_bus_hacks.patch index 4fe89b991a..299f216523 100644 --- a/target/linux/adm5120/patches/201-amba_bus_hacks.patch +++ b/target/linux/adm5120/patches/201-amba_bus_hacks.patch @@ -1,7 +1,5 @@ -Index: linux-2.6.24.7/drivers/amba/bus.c -=================================================================== ---- linux-2.6.24.7.orig/drivers/amba/bus.c -+++ linux-2.6.24.7/drivers/amba/bus.c +--- a/drivers/amba/bus.c ++++ b/drivers/amba/bus.c @@ -17,6 +17,10 @@ #include #include diff --git a/target/linux/adm5120/patches/202-pci_disable_common_quirks.patch b/target/linux/adm5120/patches/202-pci_disable_common_quirks.patch index 52fa931c84..13142add37 100644 --- a/target/linux/adm5120/patches/202-pci_disable_common_quirks.patch +++ b/target/linux/adm5120/patches/202-pci_disable_common_quirks.patch @@ -1,8 +1,6 @@ -Index: linux-2.6.24.7/drivers/pci/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/drivers/pci/Kconfig -+++ linux-2.6.24.7/drivers/pci/Kconfig -@@ -42,6 +42,12 @@ config PCI_DEBUG +--- a/drivers/pci/Kconfig ++++ b/drivers/pci/Kconfig +@@ -42,6 +42,12 @@ When in doubt, say N. @@ -15,10 +13,8 @@ Index: linux-2.6.24.7/drivers/pci/Kconfig config HT_IRQ bool "Interrupts on hypertransport devices" default y -Index: linux-2.6.24.7/drivers/pci/quirks.c -=================================================================== ---- linux-2.6.24.7.orig/drivers/pci/quirks.c -+++ linux-2.6.24.7/drivers/pci/quirks.c +--- a/drivers/pci/quirks.c ++++ b/drivers/pci/quirks.c @@ -23,6 +23,7 @@ #include #include "pci.h" @@ -27,7 +23,7 @@ Index: linux-2.6.24.7/drivers/pci/quirks.c /* The Mellanox Tavor device gives false positive parity errors * Mark this device with a broken_parity_status, to allow * PCI scanning code to "skip" this now blacklisted device. -@@ -1480,6 +1481,7 @@ static void __devinit fixup_rev1_53c810( +@@ -1480,6 +1481,7 @@ } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810); @@ -35,7 +31,7 @@ Index: linux-2.6.24.7/drivers/pci/quirks.c static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end) { -@@ -1543,6 +1545,7 @@ void pci_fixup_device(enum pci_fixup_pas +@@ -1543,6 +1545,7 @@ } EXPORT_SYMBOL(pci_fixup_device); @@ -43,7 +39,7 @@ Index: linux-2.6.24.7/drivers/pci/quirks.c /* Enable 1k I/O space granularity on the Intel P64H2 */ static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev) { -@@ -1756,3 +1759,4 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AT +@@ -1756,3 +1759,4 @@ quirk_msi_intx_disable_bug); #endif /* CONFIG_PCI_MSI */ diff --git a/target/linux/adm5120/patches/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches/203-gpio_leds_brightness.patch index 1c53192bc3..3e9f5271c5 100644 --- a/target/linux/adm5120/patches/203-gpio_leds_brightness.patch +++ b/target/linux/adm5120/patches/203-gpio_leds_brightness.patch @@ -1,8 +1,6 @@ -Index: linux-2.6.24.7/drivers/leds/leds-gpio.c -=================================================================== ---- linux-2.6.24.7.orig/drivers/leds/leds-gpio.c -+++ linux-2.6.24.7/drivers/leds/leds-gpio.c -@@ -41,13 +41,17 @@ static void gpio_led_set(struct led_clas +--- a/drivers/leds/leds-gpio.c ++++ b/drivers/leds/leds-gpio.c +@@ -41,13 +41,17 @@ container_of(led_cdev, struct gpio_led_data, cdev); int level; diff --git a/target/linux/adm5120/patches/310-adm5120_wdt.patch b/target/linux/adm5120/patches/310-adm5120_wdt.patch index 2729243466..1136ee8e65 100644 --- a/target/linux/adm5120/patches/310-adm5120_wdt.patch +++ b/target/linux/adm5120/patches/310-adm5120_wdt.patch @@ -1,8 +1,6 @@ -Index: linux-2.6.24.7/drivers/watchdog/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/drivers/watchdog/Kconfig -+++ linux-2.6.24.7/drivers/watchdog/Kconfig -@@ -607,6 +607,18 @@ config SBC_EPX_C3_WATCHDOG +--- a/drivers/watchdog/Kconfig ++++ b/drivers/watchdog/Kconfig +@@ -607,6 +607,18 @@ # MIPS Architecture @@ -21,11 +19,9 @@ Index: linux-2.6.24.7/drivers/watchdog/Kconfig config INDYDOG tristate "Indy/I2 Hardware Watchdog" depends on SGI_IP22 -Index: linux-2.6.24.7/drivers/watchdog/Makefile -=================================================================== ---- linux-2.6.24.7.orig/drivers/watchdog/Makefile -+++ linux-2.6.24.7/drivers/watchdog/Makefile -@@ -89,6 +89,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc +--- a/drivers/watchdog/Makefile ++++ b/drivers/watchdog/Makefile +@@ -89,6 +89,7 @@ # M68KNOMMU Architecture # MIPS Architecture