From: Luis R. Rodriguez Date: Sat, 31 Mar 2012 02:53:32 +0000 (-0700) Subject: compat-wireless: do not use broad export on makefiles X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=db133a867d4c0ee31211c62205b5c5287acb30a9;p=openwrt%2Fstaging%2Fblogic.git compat-wireless: do not use broad export on makefiles This inspired by Johannes' patch on compat which does the same thing. perl -pi -ne 's|^(\s*)CONFIG|$1export CONFIG|' config.mk And then we also address the autoconf generation. We shave off compile time by more than 1/2: Before: real 0m34.034s user 0m33.760s sys 0m10.580s After: real 0m16.617s user 0m22.290s sys 0m6.180s This was against 2.6.38. Signed-off-by: Luis R. Rodriguez --- diff --git a/config.mk b/config.mk index 965dc56a42dd..f02d52b7f27c 100644 --- a/config.mk +++ b/config.mk @@ -1,15 +1,9 @@ -export - -## NOTE -## Make sure to have each variable declaration start -## in the first column, no whitespace allowed. - ifeq ($(wildcard $(KLIB_BUILD)/.config),) # These will be ignored by compat autoconf - CONFIG_PCI=y - CONFIG_USB=y - CONFIG_PCMCIA=y - CONFIG_SSB=m + export CONFIG_PCI=y + export CONFIG_USB=y + export CONFIG_PCMCIA=y + export CONFIG_SSB=m else include $(KLIB_BUILD)/.config endif @@ -83,21 +77,21 @@ endif # build check endif # kernel Makefile check # These both are needed by compat-wireless || compat-bluetooth so enable them - CONFIG_COMPAT_RFKILL=y + export CONFIG_COMPAT_RFKILL=y ifeq ($(CONFIG_MAC80211),y) $(error "ERROR: you have MAC80211 compiled into the kernel, CONFIG_MAC80211=y, as such you cannot replace its mac80211 driver. You need this set to CONFIG_MAC80211=m. If you are using Fedora upgrade your kernel as later version should this set as modular. For further information on Fedora see https://bugzilla.redhat.com/show_bug.cgi?id=470143. If you are using your own kernel recompile it and make mac80211 modular") else - CONFIG_COMPAT_WIRELESS=y - CONFIG_COMPAT_WIRELESS_MODULES=m - CONFIG_COMPAT_VAR_MODULES=m + export CONFIG_COMPAT_WIRELESS=y + export CONFIG_COMPAT_WIRELESS_MODULES=m + export CONFIG_COMPAT_VAR_MODULES=m # We could technically separate these but not yet, we only have b44 # Note that we don't intend on backporting network drivers that # use Multiqueue as that was a pain to backport to kernels older than # 2.6.27. But -- we could just disable those drivers from kernels # older than 2.6.27 - CONFIG_COMPAT_NETWORK_MODULES=m - CONFIG_COMPAT_NET_USB_MODULES=m + export CONFIG_COMPAT_NETWORK_MODULES=m + export CONFIG_COMPAT_NET_USB_MODULES=m endif # The Bluetooth compatibility only builds on kernels >= 2.6.27 for now @@ -105,8 +99,8 @@ ifndef CONFIG_COMPAT_KERNEL_2_6_27 ifeq ($(CONFIG_BT),y) # we'll ignore compiling bluetooth else - CONFIG_COMPAT_BLUETOOTH=y - CONFIG_COMPAT_BLUETOOTH_MODULES=m + export CONFIG_COMPAT_BLUETOOTH=y + export CONFIG_COMPAT_BLUETOOTH_MODULES=m endif endif #CONFIG_COMPAT_KERNEL_2_6_27 @@ -117,14 +111,14 @@ endif #CONFIG_COMPAT_KERNEL_2_6_27 ifdef CONFIG_COMPAT_KERNEL_2_6_33 ifndef CONFIG_COMPAT_RHEL_6_1 ifdef CONFIG_FW_LOADER -CONFIG_COMPAT_FIRMWARE_CLASS=m +export CONFIG_COMPAT_FIRMWARE_CLASS=m endif #CONFIG_FW_LOADER endif #CONFIG_COMPAT_RHEL_6_1 endif #CONFIG_COMPAT_KERNEL_2_6_33 ifdef CONFIG_COMPAT_KERNEL_2_6_36 ifndef CONFIG_COMPAT_RHEL_6_1 - CONFIG_COMPAT_KFIFO=y + export CONFIG_COMPAT_KFIFO=y endif #CONFIG_COMPAT_RHEL_6_1 endif #CONFIG_COMPAT_KERNEL_2_6_36 @@ -133,10 +127,10 @@ endif #CONFIG_COMPAT_KERNEL_2_6_36 # whitespace, because they get passed-on through compat_autoconf.h. # ifndef CONFIG_COMPAT_KERNEL_2_6_33 -CONFIG_COMPAT_BT_SOCK_CREATE_NEEDS_KERN=y +export CONFIG_COMPAT_BT_SOCK_CREATE_NEEDS_KERN=y endif #CONFIG_COMPAT_KERNEL_2_6_33 ifdef CONFIG_COMPAT_RHEL_6_0 -CONFIG_COMPAT_BT_SOCK_CREATE_NEEDS_KERN=y +export CONFIG_COMPAT_BT_SOCK_CREATE_NEEDS_KERN=y endif #CONFIG_COMPAT_RHEL_6_0 # @@ -144,14 +138,14 @@ endif #CONFIG_COMPAT_RHEL_6_0 # whitespace, because it gets passed-on through compat_autoconf.h. # ifdef CONFIG_COMPAT_RHEL_6_0 -CONFIG_COMPAT_FIRMWARE_DATA_RW_NEEDS_FILP=y +export CONFIG_COMPAT_FIRMWARE_DATA_RW_NEEDS_FILP=y endif #CONFIG_COMPAT_RHEL_6_0 # Wireless subsystem stuff -CONFIG_MAC80211=m +export CONFIG_MAC80211=m ifndef CONFIG_COMPAT_KERNEL_2_6_33 -CONFIG_COMPAT_MAC80211_DRIVER_API_TRACER=y +export CONFIG_COMPAT_MAC80211_DRIVER_API_TRACER=y endif #CONFIG_COMPAT_KERNEL_2_6_33 # CONFIG_MAC80211_DEBUGFS=y @@ -167,24 +161,24 @@ endif #CONFIG_COMPAT_KERNEL_2_6_33 # CONFIG_MAC80211_DEBUG_COUNTERS=y # choose between pid and minstrel as default rate control algorithm -CONFIG_MAC80211_RC_DEFAULT=minstrel_ht -CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +export CONFIG_MAC80211_RC_DEFAULT=minstrel_ht +export CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y # CONFIG_MAC80211_RC_DEFAULT_PID=y # This is the one used by our compat-wireless net/mac80211/rate.c # in case you have and old kernel which is overriding this to pid. -CONFIG_COMPAT_MAC80211_RC_DEFAULT=minstrel_ht -CONFIG_MAC80211_RC_PID=y -CONFIG_MAC80211_RC_MINSTREL=y -CONFIG_MAC80211_RC_MINSTREL_HT=y +export CONFIG_COMPAT_MAC80211_RC_DEFAULT=minstrel_ht +export CONFIG_MAC80211_RC_PID=y +export CONFIG_MAC80211_RC_MINSTREL=y +export CONFIG_MAC80211_RC_MINSTREL_HT=y ifdef CONFIG_LEDS_TRIGGERS -CONFIG_MAC80211_LEDS=y +export CONFIG_MAC80211_LEDS=y endif #CONFIG_LEDS_TRIGGERS # enable mesh networking too -CONFIG_MAC80211_MESH=y +export CONFIG_MAC80211_MESH=y -CONFIG_CFG80211=m -CONFIG_CFG80211_DEFAULT_PS=y +export CONFIG_CFG80211=m +export CONFIG_CFG80211_DEFAULT_PS=y # CONFIG_CFG80211_DEBUGFS=y # CONFIG_NL80211_TESTMODE=y # CONFIG_CFG80211_DEVELOPER_WARNINGS=y @@ -192,40 +186,40 @@ CONFIG_CFG80211_DEFAULT_PS=y # CONFIG_CFG80211_INTERNAL_REGDB=y # See below for wext stuff -CONFIG_LIB80211=m -CONFIG_LIB80211_CRYPT_WEP=m -CONFIG_LIB80211_CRYPT_CCMP=m -CONFIG_LIB80211_CRYPT_TKIP=m +export CONFIG_LIB80211=m +export CONFIG_LIB80211_CRYPT_WEP=m +export CONFIG_LIB80211_CRYPT_CCMP=m +export CONFIG_LIB80211_CRYPT_TKIP=m # CONFIG_LIB80211_DEBUG=y -CONFIG_BT=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y +export CONFIG_BT=m +export CONFIG_BT_RFCOMM=m +export CONFIG_BT_RFCOMM_TTY=y +export CONFIG_BT_BNEP=m +export CONFIG_BT_BNEP_MC_FILTER=y +export CONFIG_BT_BNEP_PROTO_FILTER=y # CONFIG_BT_CMTP depends on ISDN_CAPI ifdef CONFIG_ISDN_CAPI -CONFIG_BT_CMTP=m +export CONFIG_BT_CMTP=m endif #CONFIG_ISDN_CAPI ifndef CONFIG_COMPAT_KERNEL_2_6_28 -CONFIG_COMPAT_BT_HIDP=m +export CONFIG_COMPAT_BT_HIDP=m endif #CONFIG_COMPAT_KERNEL_2_6_28 -CONFIG_BT_HCIUART=M -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIUART_ATH3K=y -CONFIG_BT_HCIUART_LL=y +export CONFIG_BT_HCIUART=M +export CONFIG_BT_HCIUART_H4=y +export CONFIG_BT_HCIUART_BCSP=y +export CONFIG_BT_HCIUART_ATH3K=y +export CONFIG_BT_HCIUART_LL=y -CONFIG_BT_HCIVHCI=m -CONFIG_BT_MRVL=m +export CONFIG_BT_HCIVHCI=m +export CONFIG_BT_MRVL=m ifdef CONFIG_PCMCIA -CONFIG_BT_HCIDTL1=m -CONFIG_BT_HCIBT3C=m -CONFIG_BT_HCIBLUECARD=m -CONFIG_BT_HCIBTUART=m +export CONFIG_BT_HCIDTL1=m +export CONFIG_BT_HCIBT3C=m +export CONFIG_BT_HCIBLUECARD=m +export CONFIG_BT_HCIBTUART=m endif #CONFIG_PCMCIA @@ -237,26 +231,26 @@ endif #CONFIG_PCMCIA # wireless_handlers attribute which will be activated by # CONFIG_WIRELESS_EXT. ifdef CONFIG_WIRELESS_EXT -CONFIG_CFG80211_WEXT=y +export CONFIG_CFG80211_WEXT=y else #CONFIG_CFG80211_WEXT $(warning "WARNING: CONFIG_CFG80211_WEXT will be deactivated or not working because kernel was compiled with CONFIG_WIRELESS_EXT=n. Tools using wext interface like iwconfig will not work. To activate it build your kernel e.g. with CONFIG_LIBIPW=m.") endif #CONFIG_WIRELESS_EXT ifdef CONFIG_STAGING -CONFIG_COMPAT_STAGING=m +export CONFIG_COMPAT_STAGING=m endif #CONFIG_STAGING # mac80211 test driver -CONFIG_MAC80211_HWSIM=m +export CONFIG_MAC80211_HWSIM=m -CONFIG_ATH5K=m +export CONFIG_ATH5K=m # CONFIG_ATH5K_DEBUG=y # CONFIG_ATH5K_TRACER=y # CONFIG_ATH5K_AHB=y -CONFIG_ATH9K=m -CONFIG_ATH9K_HW=m -CONFIG_ATH9K_COMMON=m +export CONFIG_ATH9K=m +export CONFIG_ATH9K_HW=m +export CONFIG_ATH9K_COMMON=m # CONFIG_ATH9K_DEBUGFS=y # CONFIG_ATH9K_AHB=y # CONFIG_ATH9K_PKTLOG=y @@ -267,68 +261,68 @@ CONFIG_ATH9K_COMMON=m # as default once we get minstrel properly tested and blessed by # our systems engineering team. CCK rates also need to be used # for long range considerations. -CONFIG_COMPAT_ATH9K_RATE_CONTROL=y +export CONFIG_COMPAT_ATH9K_RATE_CONTROL=y -CONFIG_ATH9K_BTCOEX_SUPPORT=y +export CONFIG_ATH9K_BTCOEX_SUPPORT=y # PCI Drivers ifdef CONFIG_PCI -CONFIG_ATH5K_PCI=y -CONFIG_ATH9K_PCI=y +export CONFIG_ATH5K_PCI=y +export CONFIG_ATH9K_PCI=y -CONFIG_IWLWIFI=m -CONFIG_IWLWIFI_P2P=y +export CONFIG_IWLWIFI=m +export CONFIG_IWLWIFI_P2P=y # CONFIG_IWLWIFI_DEBUG=y # CONFIG_IWLWIFI_DEBUGFS=y # CONFIG_IWLWIFI_DEVICE_TRACING=y # CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE=y -CONFIG_IWLEGACY=m -CONFIG_COMPAT_IWL4965=m -CONFIG_IWL3945=m +export CONFIG_IWLEGACY=m +export CONFIG_COMPAT_IWL4965=m +export CONFIG_IWL3945=m # CONFIG_IWLEGACY_DEBUG=y # CONFIG_IWLEGACY_DEBUGFS=y -CONFIG_B43=m -CONFIG_B43_HWRNG=y -CONFIG_B43_PCI_AUTOSELECT=y +export CONFIG_B43=m +export CONFIG_B43_HWRNG=y +export CONFIG_B43_PCI_AUTOSELECT=y ifdef CONFIG_PCMCIA -CONFIG_B43_PCMCIA=y +export CONFIG_B43_PCMCIA=y endif #CONFIG_PCMCIA ifdef CONFIG_MAC80211_LEDS -CONFIG_B43_LEDS=y +export CONFIG_B43_LEDS=y endif #CONFIG_MAC80211_LEDS -CONFIG_B43_PHY_LP=y -CONFIG_B43_PHY_N=y -CONFIG_B43_PHY_HT=y +export CONFIG_B43_PHY_LP=y +export CONFIG_B43_PHY_N=y +export CONFIG_B43_PHY_HT=y # CONFIG_B43_PHY_LCN=y # CONFIG_B43_DEBUG=y -CONFIG_B43LEGACY=m -CONFIG_B43LEGACY_HWRNG=y -CONFIG_B43LEGACY_PCI_AUTOSELECT=y +export CONFIG_B43LEGACY=m +export CONFIG_B43LEGACY_HWRNG=y +export CONFIG_B43LEGACY_PCI_AUTOSELECT=y ifdef CONFIG_MAC80211_LEDS -CONFIG_B43LEGACY_LEDS=y +export CONFIG_B43LEGACY_LEDS=y endif #CONFIG_MAC80211_LEDS # CONFIG_B43LEGACY_DEBUG=y -CONFIG_B43LEGACY_DMA=y -CONFIG_B43LEGACY_PIO=y +export CONFIG_B43LEGACY_DMA=y +export CONFIG_B43LEGACY_PIO=y ifdef CONFIG_WIRELESS_EXT # The Intel ipws -CONFIG_LIBIPW=m +export CONFIG_LIBIPW=m # CONFIG_LIBIPW_DEBUG=y -CONFIG_IPW2100=m -CONFIG_IPW2100_MONITOR=y +export CONFIG_IPW2100=m +export CONFIG_IPW2100_MONITOR=y # CONFIG_IPW2100_DEBUG=y -CONFIG_IPW2200=m -CONFIG_IPW2200_MONITOR=y -CONFIG_IPW2200_RADIOTAP=y -CONFIG_IPW2200_PROMISCUOUS=y -CONFIG_IPW2200_QOS=y +export CONFIG_IPW2200=m +export CONFIG_IPW2200_MONITOR=y +export CONFIG_IPW2200_RADIOTAP=y +export CONFIG_IPW2200_PROMISCUOUS=y +export CONFIG_IPW2200_QOS=y # CONFIG_IPW2200_DEBUG=y # The above enables use a second interface prefixed 'rtap'. # Example usage: @@ -346,43 +340,43 @@ endif #CONFIG_WIRELESS_EXT ifdef CONFIG_SSB # Sonics Silicon Backplane -CONFIG_SSB_SPROM=y +export CONFIG_SSB_SPROM=y -CONFIG_SSB_BLOCKIO=y -CONFIG_SSB_PCIHOST=y -CONFIG_SSB_B43_PCI_BRIDGE=y +export CONFIG_SSB_BLOCKIO=y +export CONFIG_SSB_PCIHOST=y +export CONFIG_SSB_B43_PCI_BRIDGE=y ifdef CONFIG_PCMCIA -CONFIG_SSB_PCMCIAHOST=y +export CONFIG_SSB_PCMCIAHOST=y endif #CONFIG_PCMCIA # CONFIG_SSB_DEBUG=y -CONFIG_SSB_DRIVER_PCICORE=y -CONFIG_B43_SSB=y +export CONFIG_SSB_DRIVER_PCICORE=y +export CONFIG_B43_SSB=y endif #CONFIG_SSB -CONFIG_BCMA=m -CONFIG_BCMA_BLOCKIO=y -CONFIG_BCMA_HOST_PCI=y +export CONFIG_BCMA=m +export CONFIG_BCMA_BLOCKIO=y +export CONFIG_BCMA_HOST_PCI=y # CONFIG_BCMA_DEBUG=y -CONFIG_B43_BCMA=y -CONFIG_B43_BCMA_EXTRA=y +export CONFIG_B43_BCMA=y +export CONFIG_B43_BCMA_EXTRA=y -CONFIG_P54_PCI=m +export CONFIG_P54_PCI=m -CONFIG_B44=m -CONFIG_B44_PCI=y +export CONFIG_B44=m +export CONFIG_B44_PCI=y -CONFIG_RTL8180=m +export CONFIG_RTL8180=m -CONFIG_ADM8211=m +export CONFIG_ADM8211=m -CONFIG_RT2X00_LIB_PCI=m -CONFIG_RT2400PCI=m -CONFIG_RT2500PCI=m +export CONFIG_RT2X00_LIB_PCI=m +export CONFIG_RT2400PCI=m +export CONFIG_RT2500PCI=m ifdef CONFIG_CRC_CCITT -CONFIG_RT2800PCI=m -CONFIG_RT2800PCI_RT33XX=y -CONFIG_RT2800PCI_RT35XX=y -CONFIG_RT2800PCI_RT53XX=y +export CONFIG_RT2800PCI=m +export CONFIG_RT2800PCI_RT33XX=y +export CONFIG_RT2800PCI_RT35XX=y +export CONFIG_RT2800PCI_RT53XX=y endif #CONFIG_CRC_CCITT NEED_RT2X00=y @@ -390,46 +384,46 @@ NEED_RT2X00=y # CRC to check the firmware. We check here first for the PCI # driver as we're in the PCI section. ifdef CONFIG_CRC_ITU_T -CONFIG_RT61PCI=m +export CONFIG_RT61PCI=m endif #CONFIG_CRC_ITU_T -CONFIG_MWL8K=m +export CONFIG_MWL8K=m # Ethernet drivers go here -CONFIG_ATL1=m -CONFIG_ATL2=m -CONFIG_ATL1E=m +export CONFIG_ATL1=m +export CONFIG_ATL2=m +export CONFIG_ATL1E=m ifdef CONFIG_COMPAT_KERNEL_2_6_27 -CONFIG_ATL1C=n -CONFIG_ALX=m +export CONFIG_ATL1C=n +export CONFIG_ALX=m else #CONFIG_COMPAT_KERNEL_2_6_27 -CONFIG_ATL1C=n -CONFIG_ALX=m +export CONFIG_ATL1C=n +export CONFIG_ALX=m endif #CONFIG_COMPAT_KERNEL_2_6_27 ifdef CONFIG_WIRELESS_EXT -CONFIG_HERMES=m -CONFIG_HERMES_CACHE_FW_ON_INIT=y +export CONFIG_HERMES=m +export CONFIG_HERMES_CACHE_FW_ON_INIT=y ifdef CONFIG_PPC_PMAC -CONFIG_APPLE_AIRPORT=m +export CONFIG_APPLE_AIRPORT=m endif #CONFIG_PPC_PMAC -CONFIG_PLX_HERMES=m -CONFIG_TMD_HERMES=m -CONFIG_NORTEL_HERMES=m -CONFIG_PCI_HERMES=m +export CONFIG_PLX_HERMES=m +export CONFIG_TMD_HERMES=m +export CONFIG_NORTEL_HERMES=m +export CONFIG_PCI_HERMES=m ifdef CONFIG_PCMCIA -CONFIG_PCMCIA_HERMES=m -CONFIG_PCMCIA_SPECTRUM=m +export CONFIG_PCMCIA_HERMES=m +export CONFIG_PCMCIA_SPECTRUM=m endif #CONFIG_PCMCIA endif #CONFIG_WIRELESS_EXT -CONFIG_RTL8192CE=m -CONFIG_RTL8192SE=m -CONFIG_RTL8192DE=m +export CONFIG_RTL8192CE=m +export CONFIG_RTL8192SE=m +export CONFIG_RTL8192DE=m -CONFIG_BRCMSMAC=m +export CONFIG_BRCMSMAC=m -CONFIG_MWIFIEX_PCIE=m +export CONFIG_MWIFIEX_PCIE=m endif #CONFIG_PCI ## end of PCI @@ -437,10 +431,10 @@ endif #CONFIG_PCI ifdef CONFIG_PCMCIA ifdef CONFIG_COMPAT_KERNEL_2_6_27 -CONFIG_LIBERTAS=n -CONFIG_LIBERTAS_CS=n +export CONFIG_LIBERTAS=n +export CONFIG_LIBERTAS_CS=n else #CONFIG_COMPAT_KERNEL_2_6_27 -CONFIG_LIBERTAS_CS=m +export CONFIG_LIBERTAS_CS=m NEED_LIBERTAS=y endif #CONFIG_COMPAT_KERNEL_2_6_27 @@ -448,12 +442,12 @@ endif #CONFIG_PCMCIA ## end of PCMCIA # This is required for some cards -CONFIG_EEPROM_93CX6=m +export CONFIG_EEPROM_93CX6=m # USB Drivers ifdef CONFIG_USB ifndef CONFIG_COMPAT_KERNEL_2_6_29 -CONFIG_COMPAT_ZD1211RW=m +export CONFIG_COMPAT_ZD1211RW=m # CONFIG_ZD1211RW_DEBUG=y endif #CONFIG_COMPAT_KERNEL_2_6_29 @@ -465,84 +459,84 @@ endif #CONFIG_COMPAT_KERNEL_2_6_29 # Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER # it also requires new RNDIS_HOST and CDC_ETHER modules which we add ifdef CONFIG_COMPAT_KERNEL_2_6_29 -CONFIG_USB_COMPAT_USBNET=n -CONFIG_USB_NET_COMPAT_RNDIS_HOST=n -CONFIG_USB_NET_COMPAT_RNDIS_WLAN=n -CONFIG_USB_NET_COMPAT_CDCETHER=n +export CONFIG_USB_COMPAT_USBNET=n +export CONFIG_USB_NET_COMPAT_RNDIS_HOST=n +export CONFIG_USB_NET_COMPAT_RNDIS_WLAN=n +export CONFIG_USB_NET_COMPAT_CDCETHER=n else #CONFIG_COMPAT_KERNEL_2_6_29 -CONFIG_USB_COMPAT_USBNET=m +export CONFIG_USB_COMPAT_USBNET=m ifdef CONFIG_USB_NET_CDCETHER -CONFIG_USB_NET_COMPAT_RNDIS_HOST=m -CONFIG_USB_NET_COMPAT_RNDIS_WLAN=m +export CONFIG_USB_NET_COMPAT_RNDIS_HOST=m +export CONFIG_USB_NET_COMPAT_RNDIS_WLAN=m endif #CONFIG_USB_NET_CDCETHER ifdef CONFIG_USB_NET_CDCETHER_MODULE -CONFIG_USB_NET_COMPAT_RNDIS_HOST=m -CONFIG_USB_NET_COMPAT_RNDIS_WLAN=m +export CONFIG_USB_NET_COMPAT_RNDIS_HOST=m +export CONFIG_USB_NET_COMPAT_RNDIS_WLAN=m endif #CONFIG_USB_NET_CDCETHER -CONFIG_USB_NET_COMPAT_CDCETHER=m +export CONFIG_USB_NET_COMPAT_CDCETHER=m endif #CONFIG_COMPAT_KERNEL_2_6_29 -CONFIG_P54_USB=m -CONFIG_RTL8187=m +export CONFIG_P54_USB=m +export CONFIG_RTL8187=m ifdef CONFIG_MAC80211_LEDS -CONFIG_RTL8187_LEDS=y +export CONFIG_RTL8187_LEDS=y endif #CONFIG_MAC80211_LEDS -CONFIG_AT76C50X_USB=m +export CONFIG_AT76C50X_USB=m ifndef CONFIG_COMPAT_KERNEL_2_6_29 -CONFIG_CARL9170=m +export CONFIG_CARL9170=m ifdef CONFIG_MAC80211_LEDS -CONFIG_CARL9170_LEDS=y +export CONFIG_CARL9170_LEDS=y endif #CONFIG_MAC80211_LEDS # CONFIG_CARL9170_DEBUGFS=y -CONFIG_CARL9170_WPC=y +export CONFIG_CARL9170_WPC=y endif #CONFIG_COMPAT_KERNEL_2_6_29 # This activates a threading fix for usb urb. # this is mainline commit: b3e670443b7fb8a2d29831b62b44a039c283e351 # This fix will be included in some stable releases. -CONFIG_COMPAT_USB_URB_THREAD_FIX=y +export CONFIG_COMPAT_USB_URB_THREAD_FIX=y -CONFIG_ATH9K_HTC=m +export CONFIG_ATH9K_HTC=m # CONFIG_ATH9K_HTC_DEBUGFS=y # RT2500USB does not require firmware -CONFIG_RT2500USB=m +export CONFIG_RT2500USB=m ifdef CONFIG_CRC_CCITT -CONFIG_RT2800USB=m -CONFIG_RT2800USB_RT33XX=y -CONFIG_RT2800USB_RT35XX=y -CONFIG_RT2800USB_RT53XX=y -CONFIG_RT2800USB_UNKNOWN=y +export CONFIG_RT2800USB=m +export CONFIG_RT2800USB_RT33XX=y +export CONFIG_RT2800USB_RT35XX=y +export CONFIG_RT2800USB_RT53XX=y +export CONFIG_RT2800USB_UNKNOWN=y endif #CONFIG_CRC_CCITT -CONFIG_RT2X00_LIB_USB=m +export CONFIG_RT2X00_LIB_USB=m NEED_RT2X00=y # RT73USB requires firmware ifdef CONFIG_CRC_ITU_T -CONFIG_RT73USB=m +export CONFIG_RT73USB=m endif #CONFIG_CRC_ITU_T ifdef CONFIG_COMPAT_KERNEL_2_6_27 -CONFIG_LIBERTAS_THINFIRM_USB=n -CONFIG_LIBERTAS_USB=n +export CONFIG_LIBERTAS_THINFIRM_USB=n +export CONFIG_LIBERTAS_USB=n NEED_LIBERTAS=n else #CONFIG_COMPAT_KERNEL_2_6_27 -CONFIG_LIBERTAS_THINFIRM_USB=m -CONFIG_LIBERTAS_USB=m +export CONFIG_LIBERTAS_THINFIRM_USB=m +export CONFIG_LIBERTAS_USB=m NEED_LIBERTAS=y endif #CONFIG_COMPAT_KERNEL_2_6_27 -CONFIG_ORINOCO_USB=m +export CONFIG_ORINOCO_USB=m -CONFIG_BT_HCIBTUSB=m -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_ATH3K=m +export CONFIG_BT_HCIBTUSB=m +export CONFIG_BT_HCIBCM203X=m +export CONFIG_BT_HCIBPA10X=m +export CONFIG_BT_HCIBFUSB=m +export CONFIG_BT_ATH3K=m -CONFIG_RTL8192CU=m +export CONFIG_RTL8192CU=m endif #CONFIG_USB end of USB driver list @@ -550,16 +544,16 @@ ifdef CONFIG_SPI_MASTER ifndef CONFIG_COMPAT_KERNEL_2_6_25 ifdef CONFIG_CRC7 -CONFIG_WL1251_SPI=m -CONFIG_WL12XX_SPI=m +export CONFIG_WL1251_SPI=m +export CONFIG_WL12XX_SPI=m endif #CONFIG_CRC7 -CONFIG_P54_SPI=m +export CONFIG_P54_SPI=m ifdef CONFIG_COMPAT_KERNEL_2_6_27 -CONFIG_LIBERTAS_SPI=n +export CONFIG_LIBERTAS_SPI=n NEED_LIBERTAS=n else #CONFIG_COMPAT_KERNEL_2_6_27 -CONFIG_LIBERTAS_SPI=m +export CONFIG_LIBERTAS_SPI=m NEED_LIBERTAS=y endif #CONFIG_COMPAT_KERNEL_2_6_27 @@ -568,64 +562,64 @@ endif #CONFIG_SPI_MASTER end of SPI driver list ifdef CONFIG_MMC -CONFIG_SSB_SDIOHOST=y -CONFIG_B43_SDIO=y +export CONFIG_SSB_SDIOHOST=y +export CONFIG_B43_SDIO=y ifdef CONFIG_CRC7 ifdef CONFIG_WL12XX_PLATFORM_DATA -CONFIG_COMPAT_WL1251_SDIO=m +export CONFIG_COMPAT_WL1251_SDIO=m endif #CONFIG_WL12XX_PLATFORM_DATA ifndef CONFIG_COMPAT_KERNEL_2_6_32 ifdef CONFIG_WL12XX_PLATFORM_DATA -CONFIG_COMPAT_WL12XX_SDIO=m +export CONFIG_COMPAT_WL12XX_SDIO=m endif #CONFIG_WL12XX_PLATFORM_DATA endif #CONFIG_COMPAT_KERNEL_2_6_32 endif #CONFIG_CRC7 -CONFIG_MWIFIEX_SDIO=m +export CONFIG_MWIFIEX_SDIO=m ifndef CONFIG_COMPAT_KERNEL_2_6_32 -CONFIG_COMPAT_LIBERTAS_SDIO=m +export CONFIG_COMPAT_LIBERTAS_SDIO=m NEED_LIBERTAS=y endif #CONFIG_COMPAT_KERNEL_2_6_32 -CONFIG_IWM=m +export CONFIG_IWM=m # CONFIG_IWM_DEBUG=y # CONFIG_IWM_TRACING=y -CONFIG_BT_HCIBTSDIO=m -CONFIG_BT_MRVL_SDIO=m +export CONFIG_BT_HCIBTSDIO=m +export CONFIG_BT_MRVL_SDIO=m ifndef CONFIG_COMPAT_KERNEL_2_6_27 -CONFIG_ATH6KL=m +export CONFIG_ATH6KL=m # CONFIG_ATH6KL_DEBUG=y endif #CONFIG_COMPAT_KERNEL_2_6_27 ifndef CONFIG_COMPAT_KERNEL_2_6_29 -CONFIG_BRCMFMAC=m -CONFIG_BRCMFMAC_SDIO=y +export CONFIG_BRCMFMAC=m +export CONFIG_BRCMFMAC_SDIO=y endif #CONFIG_COMPAT_KERNEL_2_6_29 endif #CONFIG_MMC -CONFIG_RTLWIFI=m -CONFIG_RTL8192C_COMMON=m +export CONFIG_RTLWIFI=m +export CONFIG_RTL8192C_COMMON=m # Common rt2x00 requirements ifeq ($(NEED_RT2X00),y) -CONFIG_RT2X00=y -CONFIG_RT2X00_LIB=m -CONFIG_RT2800_LIB=m -CONFIG_RT2X00_LIB_FIRMWARE=y -CONFIG_RT2X00_LIB_CRYPTO=y +export CONFIG_RT2X00=y +export CONFIG_RT2X00_LIB=m +export CONFIG_RT2800_LIB=m +export CONFIG_RT2X00_LIB_FIRMWARE=y +export CONFIG_RT2X00_LIB_CRYPTO=y # CONFIG_RT2X00_LIB_SOC=y ifdef CONFIG_COMPAT_KERNEL_2_6_25 -CONFIG_RT2X00_LIB_LEDS=n +export CONFIG_RT2X00_LIB_LEDS=n else #CONFIG_COMPAT_KERNEL_2_6_25 ifdef CONFIG_LEDS_CLASS -CONFIG_RT2X00_LIB_LEDS=y +export CONFIG_RT2X00_LIB_LEDS=y endif #CONFIG_LEDS_CLASS endif #CONFIG_COMPAT_KERNEL_2_6_25 # CONFIG_RT2X00_DEBUG=y @@ -633,40 +627,40 @@ endif #CONFIG_COMPAT_KERNEL_2_6_25 endif # p54 -CONFIG_P54_COMMON=m +export CONFIG_P54_COMMON=m ifdef CONFIG_MAC80211_LEDS -CONFIG_P54_LEDS=y +export CONFIG_P54_LEDS=y endif #CONFIG_MAC80211_LEDS # Atheros -CONFIG_ATH_COMMON=m +export CONFIG_ATH_COMMON=m # CONFIG_ATH_DEBUG=y -CONFIG_BRCMUTIL=m +export CONFIG_BRCMUTIL=m # CONFIG_BRCMDBG=y ifdef CONFIG_CRC7 -CONFIG_WL1251=m -CONFIG_WL12XX=m +export CONFIG_WL1251=m +export CONFIG_WL12XX=m endif #CONFIG_CRC7 -CONFIG_MWIFIEX=m +export CONFIG_MWIFIEX=m ifndef CONFIG_CORDIC -CONFIG_COMPAT_CORDIC=y +export CONFIG_COMPAT_CORDIC=y endif #CONFIG_CORDIC ifndef CONFIG_CRC8 -CONFIG_COMPAT_CRC8=y +export CONFIG_COMPAT_CRC8=y endif #CONFIG_CRC8 ifdef CONFIG_COMPAT_KERNEL_2_6_27 -CONFIG_LIBERTAS=n +export CONFIG_LIBERTAS=n else #CONFIG_COMPAT_KERNEL_2_6_27 ifeq ($(NEED_LIBERTAS),y) -CONFIG_LIBERTAS_THINFIRM=m -CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_MESH=y +export CONFIG_LIBERTAS_THINFIRM=m +export CONFIG_LIBERTAS=m +export CONFIG_LIBERTAS_MESH=y # CONFIG_LIBERTAS_DEBUG=y endif endif #CONFIG_COMPAT_KERNEL_2_6_27 @@ -674,10 +668,10 @@ endif #CONFIG_COMPAT_KERNEL_2_6_27 # We need the backported rfkill module on kernel < 2.6.31. # In more recent kernel versions use the in kernel rfkill module. ifdef CONFIG_COMPAT_KERNEL_2_6_31 -CONFIG_RFKILL_BACKPORT=m +export CONFIG_RFKILL_BACKPORT=m ifdef CONFIG_LEDS_TRIGGERS -CONFIG_RFKILL_BACKPORT_LEDS=y +export CONFIG_RFKILL_BACKPORT_LEDS=y endif #CONFIG_LEDS_TRIGGERS -CONFIG_RFKILL_BACKPORT_INPUT=y +export CONFIG_RFKILL_BACKPORT_INPUT=y endif #CONFIG_COMPAT_KERNEL_2_6_31 diff --git a/scripts/gen-compat-autoconf.sh b/scripts/gen-compat-autoconf.sh index 87257c6d30a9..c7bdd38d0b1d 100755 --- a/scripts/gen-compat-autoconf.sh +++ b/scripts/gen-compat-autoconf.sh @@ -146,7 +146,9 @@ EOF kernel_version_req $OLDEST_KERNEL_SUPPORTED # For each CONFIG_FOO=x option -for i in $(egrep -h '^CONFIG_|^ifdef CONFIG_|^ifndef CONFIG_|^endif #CONFIG_|^else #CONFIG_' $COMPAT_CONFIG_1 $COMPAT_CONFIG_2 | sed 's/ /+/'); do +for i in $(egrep -h '^export CONFIG_|^ifdef CONFIG_|^ifndef CONFIG_|^endif #CONFIG_|^else #CONFIG_' $COMPAT_CONFIG_1 $COMPAT_CONFIG_2 | \ + sed 's/export //' | \ + sed 's/ /+/'); do case $i in 'ifdef+CONFIG_'* ) echo "#$i" | sed -e 's/+/ /' -e 's/\(ifdef CONFIG_COMPAT_KERNEL_3_\)\([0-9]*\)/if (LINUX_VERSION_CODE < KERNEL_VERSION(3,\2,0))/' -e 's/\(ifdef CONFIG_COMPAT_KERNEL_2_6_\)\([0-9]*\)/if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,\2))/' -e 's/\(ifdef CONFIG_COMPAT_RHEL_\)\([0-9]*\)_\([0-9]*\)/if (defined(RHEL_MAJOR) \&\& RHEL_MAJOR == \2 \&\& RHEL_MINOR >= \3)/' -e 's/\(#ifdef \)\(CONFIG_[^:space:]*\)/#if defined(\2) || defined(\2_MODULE)/'