From: Tomasz Maciej Nowak Date: Tue, 25 May 2021 12:53:43 +0000 (+0200) Subject: mvebu: armada-37xx: remove ethernet alias patch X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=db014428b153215a2bdffc80ea44a3a03a1e18cd;p=openwrt%2Fstaging%2Flinusw.git mvebu: armada-37xx: remove ethernet alias patch This patch has been added with initial support for ESPRESSObin board and mistakenly it affects all boards with this SoC. Drop this patch since the aliases are now in upstream dts for ESPRESSObin. If any boards are relying on this, please add the respective alias to that board dts. Signed-off-by: Tomasz Maciej Nowak --- diff --git a/target/linux/mvebu/patches-5.10/314-arm64-dts-marvell-armada37xx-Add-eth0-alias.patch b/target/linux/mvebu/patches-5.10/314-arm64-dts-marvell-armada37xx-Add-eth0-alias.patch deleted file mode 100644 index e989f59d5c..0000000000 --- a/target/linux/mvebu/patches-5.10/314-arm64-dts-marvell-armada37xx-Add-eth0-alias.patch +++ /dev/null @@ -1,20 +0,0 @@ -From be893f672e340b56ca60f2f6c32fdd713a5852f5 Mon Sep 17 00:00:00 2001 -From: Kevin Mihelich -Date: Tue, 4 Jul 2017 19:25:28 -0600 -Subject: arm64: dts: marvell: armada37xx: Add eth0 alias - -Signed-off-by: Kevin Mihelich ---- - arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi -+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi -@@ -18,6 +18,7 @@ - #size-cells = <2>; - - aliases { -+ ethernet0 = ð0; - serial0 = &uart0; - serial1 = &uart1; - }; diff --git a/target/linux/mvebu/patches-5.10/314-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch b/target/linux/mvebu/patches-5.10/314-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch new file mode 100644 index 0000000000..2240d0b39e --- /dev/null +++ b/target/linux/mvebu/patches-5.10/314-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch @@ -0,0 +1,34 @@ +Certain SFP modules (most notably Nokia GPON ones) first check +connectivity on 1000base-x, and switch to 2500base-x afterwards. This +is considered a quirk so the phylink switches the interface to +2500base-x as well. + +However, after power-cycling the uDPU device, network interface/SFP module +will not work correctly until the module is re-seated. This patch +resolves this issue by forcing the interface to be brought up in +2500base-x mode by default. + +Signed-off-by: Jakov Petrina +Signed-off-by: Vladimir Vid +Cc: Luka Perkov + +--- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts ++++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts +@@ -162,7 +162,7 @@ + }; + + ð0 { +- phy-mode = "sgmii"; ++ phy-mode = "2500base-x"; + status = "okay"; + managed = "in-band-status"; + phys = <&comphy1 0>; +@@ -170,7 +170,7 @@ + }; + + ð1 { +- phy-mode = "sgmii"; ++ phy-mode = "2500base-x"; + status = "okay"; + managed = "in-band-status"; + phys = <&comphy0 1>; diff --git a/target/linux/mvebu/patches-5.10/315-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch b/target/linux/mvebu/patches-5.10/315-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch deleted file mode 100644 index 2240d0b39e..0000000000 --- a/target/linux/mvebu/patches-5.10/315-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch +++ /dev/null @@ -1,34 +0,0 @@ -Certain SFP modules (most notably Nokia GPON ones) first check -connectivity on 1000base-x, and switch to 2500base-x afterwards. This -is considered a quirk so the phylink switches the interface to -2500base-x as well. - -However, after power-cycling the uDPU device, network interface/SFP module -will not work correctly until the module is re-seated. This patch -resolves this issue by forcing the interface to be brought up in -2500base-x mode by default. - -Signed-off-by: Jakov Petrina -Signed-off-by: Vladimir Vid -Cc: Luka Perkov - ---- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts -+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts -@@ -162,7 +162,7 @@ - }; - - ð0 { -- phy-mode = "sgmii"; -+ phy-mode = "2500base-x"; - status = "okay"; - managed = "in-band-status"; - phys = <&comphy1 0>; -@@ -170,7 +170,7 @@ - }; - - ð1 { -- phy-mode = "sgmii"; -+ phy-mode = "2500base-x"; - status = "okay"; - managed = "in-band-status"; - phys = <&comphy0 1>; diff --git a/target/linux/mvebu/patches-5.10/315-armada-xp-linksys-mamba-resize-kernel.patch b/target/linux/mvebu/patches-5.10/315-armada-xp-linksys-mamba-resize-kernel.patch new file mode 100644 index 0000000000..f1fddceff4 --- /dev/null +++ b/target/linux/mvebu/patches-5.10/315-armada-xp-linksys-mamba-resize-kernel.patch @@ -0,0 +1,37 @@ +From 258233f00bcd013050efee00c5d9128ef8cd62dd Mon Sep 17 00:00:00 2001 +From: Tad +Date: Fri, 5 Feb 2021 22:32:11 -0500 +Subject: [PATCH] ARM: dts: armada-xp-linksys-mamba: Increase kernel + partition to 4MB + +Signed-off-by: Tad Davanzo +--- + arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts ++++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +@@ -456,9 +456,9 @@ + reg = <0xa00000 0x2800000>; /* 40MB */ + }; + +- partition@d00000 { ++ partition@e00000 { + label = "rootfs1"; +- reg = <0xd00000 0x2500000>; /* 37MB */ ++ reg = <0xe00000 0x2400000>; /* 36MB */ + }; + + /* kernel2 overlaps with rootfs2 by design */ +@@ -467,9 +467,9 @@ + reg = <0x3200000 0x2800000>; /* 40MB */ + }; + +- partition@3500000 { ++ partition@3600000 { + label = "rootfs2"; +- reg = <0x3500000 0x2500000>; /* 37MB */ ++ reg = <0x3600000 0x2400000>; /* 36MB */ + }; + + /* diff --git a/target/linux/mvebu/patches-5.10/316-armada-370-dts-fix-crypto-engine.patch b/target/linux/mvebu/patches-5.10/316-armada-370-dts-fix-crypto-engine.patch new file mode 100644 index 0000000000..19378870ef --- /dev/null +++ b/target/linux/mvebu/patches-5.10/316-armada-370-dts-fix-crypto-engine.patch @@ -0,0 +1,29 @@ +--- a/arch/arm/boot/dts/armada-370.dtsi ++++ b/arch/arm/boot/dts/armada-370.dtsi +@@ -234,7 +234,7 @@ + clocks = <&gateclk 23>; + clock-names = "cesa0"; + marvell,crypto-srams = <&crypto_sram>; +- marvell,crypto-sram-size = <0x7e0>; ++ marvell,crypto-sram-size = <0x800>; + }; + }; + +@@ -255,12 +255,17 @@ + * cpuidle workaround. + */ + idle-sram@0 { ++ status = "disabled"; + reg = <0x0 0x20>; + }; + }; + }; + }; + ++&coherencyfab { ++ broken-idle; ++}; ++ + /* + * Default UART pinctrl setting without RTS/CTS, can be overwritten on + * board level if a different configuration is used. diff --git a/target/linux/mvebu/patches-5.10/316-armada-xp-linksys-mamba-resize-kernel.patch b/target/linux/mvebu/patches-5.10/316-armada-xp-linksys-mamba-resize-kernel.patch deleted file mode 100644 index f1fddceff4..0000000000 --- a/target/linux/mvebu/patches-5.10/316-armada-xp-linksys-mamba-resize-kernel.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 258233f00bcd013050efee00c5d9128ef8cd62dd Mon Sep 17 00:00:00 2001 -From: Tad -Date: Fri, 5 Feb 2021 22:32:11 -0500 -Subject: [PATCH] ARM: dts: armada-xp-linksys-mamba: Increase kernel - partition to 4MB - -Signed-off-by: Tad Davanzo ---- - arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - ---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -@@ -456,9 +456,9 @@ - reg = <0xa00000 0x2800000>; /* 40MB */ - }; - -- partition@d00000 { -+ partition@e00000 { - label = "rootfs1"; -- reg = <0xd00000 0x2500000>; /* 37MB */ -+ reg = <0xe00000 0x2400000>; /* 36MB */ - }; - - /* kernel2 overlaps with rootfs2 by design */ -@@ -467,9 +467,9 @@ - reg = <0x3200000 0x2800000>; /* 40MB */ - }; - -- partition@3500000 { -+ partition@3600000 { - label = "rootfs2"; -- reg = <0x3500000 0x2500000>; /* 37MB */ -+ reg = <0x3600000 0x2400000>; /* 36MB */ - }; - - /* diff --git a/target/linux/mvebu/patches-5.10/317-armada-370-dts-fix-crypto-engine.patch b/target/linux/mvebu/patches-5.10/317-armada-370-dts-fix-crypto-engine.patch deleted file mode 100644 index 19378870ef..0000000000 --- a/target/linux/mvebu/patches-5.10/317-armada-370-dts-fix-crypto-engine.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/arch/arm/boot/dts/armada-370.dtsi -+++ b/arch/arm/boot/dts/armada-370.dtsi -@@ -234,7 +234,7 @@ - clocks = <&gateclk 23>; - clock-names = "cesa0"; - marvell,crypto-srams = <&crypto_sram>; -- marvell,crypto-sram-size = <0x7e0>; -+ marvell,crypto-sram-size = <0x800>; - }; - }; - -@@ -255,12 +255,17 @@ - * cpuidle workaround. - */ - idle-sram@0 { -+ status = "disabled"; - reg = <0x0 0x20>; - }; - }; - }; - }; - -+&coherencyfab { -+ broken-idle; -+}; -+ - /* - * Default UART pinctrl setting without RTS/CTS, can be overwritten on - * board level if a different configuration is used.