From: Johannes Stezenbach Date: Tue, 17 May 2005 04:54:40 +0000 (-0700) Subject: [PATCH] dvb: bt8xx: update documentation X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=daeb6aa40be55b0750aea92dea78b8ebc40ca9a8;p=openwrt%2Fstaging%2Fblogic.git [PATCH] dvb: bt8xx: update documentation update bt8xx documentation (Uwe Bugla) Signed-off-by: Johannes Stezenbach Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/Documentation/dvb/bt8xx.txt b/Documentation/dvb/bt8xx.txt index e3cacf4f2345..d84df8072d7e 100644 --- a/Documentation/dvb/bt8xx.txt +++ b/Documentation/dvb/bt8xx.txt @@ -17,34 +17,23 @@ Because of this, you need to enable "Device drivers" => "Multimedia devices" => "Video For Linux" => "BT848 Video For Linux" +Furthermore you need to enable +"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices" + => "DVB for Linux" "DVB Core Support" "Nebula/Pinnacle PCTV/TwinHan PCI Cards" + 2) Loading Modules ================== In general you need to load the bttv driver, which will handle the gpio and -i2c communication for us. Next you need the common dvb-bt8xx device driver -and one frontend driver. - -The bttv driver will HANG YOUR SYSTEM IF YOU DO NOT SPECIFY THE CORRECT -CARD ID! - -(If you don't get your card running and you suspect that the card id you're -using is wrong, have a look at "bttv-cards.c" for a list of possible card -ids.) - -Pay attention to failures when you load the frontend drivers -(e.g. dmesg, /var/log/messages). +i2c communication for us, plus the common dvb-bt8xx device driver. +The frontends for Nebula (nxt6000), Pinnacle PCTV (cx24110) and +TwinHan (dst) are loaded automatically by the dvb-bt8xx device driver. 3a) Nebula / Pinnacle PCTV -------------------------- - $ modprobe bttv i2c_hw=1 card=0x68 - $ modprobe dvb-bt8xx - -For Nebula cards use the "nxt6000" frontend driver: - $ modprobe nxt6000 - -For Pinnacle PCTV cards use the "cx24110" frontend driver: - $ modprobe cx24110 + $ modprobe bttv (normally bttv is being loaded automatically by kmod) + $ modprobe dvb-bt8xx (or just place dvb-bt8xx in /etc/modules for automatic loading) 3b) TwinHan -----------