From: Harshal Gohel Date: Wed, 3 Jan 2024 14:53:47 +0000 (+0100) Subject: rtl93xx: dsa: Fix 802.1QinQ for trunk ports X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=da495c477d9018d59b1f6deb128cc8372d16df16;p=openwrt%2Fstaging%2Fldir.git rtl93xx: dsa: Fix 802.1QinQ for trunk ports Fix incorrect register value being set for VLAN_PORT_FWD Before, the 0b1111 would be set for the register which means outgoing packets would receive an extra tag, corresponding to the PVID of the port. On untagged ports, this meant outgoing packets with a single tag. On tagged ports, this meant outgoing QinQ packets, where the inner tag was either the PVID of the untagged ingress port, or the already assigned original (single) tag. Acked-by: Simon Wunderlich Signed-off-by: Harshal Gohel --- diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl930x.c b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl930x.c index 4a4a926bb2..793d762489 100644 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl930x.c +++ b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl930x.c @@ -258,9 +258,9 @@ static void rtl930x_vlan_fwd_on_inner(int port, bool is_set) { /* Always set all tag modes to fwd based on either inner or outer tag */ if (is_set) - sw_w32_mask(0, 0xf, RTL930X_VLAN_PORT_FWD + (port << 2)); - else sw_w32_mask(0xf, 0, RTL930X_VLAN_PORT_FWD + (port << 2)); + else + sw_w32_mask(0, 0xf, RTL930X_VLAN_PORT_FWD + (port << 2)); } static void rtl930x_vlan_profile_setup(int profile) diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl931x.c b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl931x.c index 3221109c18..0e82d79d4c 100644 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl931x.c +++ b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl931x.c @@ -827,9 +827,9 @@ static void rtl931x_vlan_fwd_on_inner(int port, bool is_set) { /* Always set all tag modes to fwd based on either inner or outer tag */ if (is_set) - sw_w32_mask(0, 0xf, RTL931X_VLAN_PORT_FWD + (port << 2)); - else sw_w32_mask(0xf, 0, RTL931X_VLAN_PORT_FWD + (port << 2)); + else + sw_w32_mask(0, 0xf, RTL931X_VLAN_PORT_FWD + (port << 2)); } static void rtl931x_vlan_profile_setup(int profile)