From: Markus Stockhausen Date: Sun, 11 Aug 2024 16:45:59 +0000 (-0400) Subject: realtek: 6.6: copy patch 310-add-i2c-rtl9300-support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d999a02fd85229291fba52e83ea43cb1614d9257;p=openwrt%2Fstaging%2Fxback.git realtek: 6.6: copy patch 310-add-i2c-rtl9300-support Copy the patch file to 6.6 Signed-off-by: Markus Stockhausen --- diff --git a/target/linux/realtek/patches-6.6/310-add-i2c-rtl9300-support.patch b/target/linux/realtek/patches-6.6/310-add-i2c-rtl9300-support.patch new file mode 100644 index 0000000000..2125aea77f --- /dev/null +++ b/target/linux/realtek/patches-6.6/310-add-i2c-rtl9300-support.patch @@ -0,0 +1,46 @@ +From 63a0a4d85bc900464c5b046b13808a582345f8c8 Mon Sep 17 00:00:00 2001 +From: Birger Koblitz +Date: Sat, 11 Dec 2021 20:14:47 +0100 +Subject: [PATCH] realtek: Add support for RTL9300/RTL9310 I2C controller + +This adds support for the RTL9300 and RTL9310 I2C controller. +The controller implements the SMBus protocol for SMBus transfers +over an I2C bus. The driver supports selecting one of the 2 possible +SCL pins and any of the 8 possible SDA pins. Bus speeds of +100kHz (standard speed) and 400kHz (high speed I2C) are supported. + +Submitted-by: Birger Koblitz +--- + drivers/i2c/busses/Kconfig | 10 +++++++++ + drivers/i2c/busses/Makefile | 1 + + 2 files changed, 11 insertions(+) + +--- a/drivers/i2c/busses/Kconfig ++++ b/drivers/i2c/busses/Kconfig +@@ -949,6 +949,16 @@ config I2C_RK3X + This driver can also be built as a module. If so, the module will + be called i2c-rk3x. + ++config I2C_RTL9300 ++ tristate "Realtek RTL9300 I2C adapter" ++ depends on OF ++ help ++ Say Y here to include support for the I2C adapter in Realtek RTL9300 ++ and RTL9310 SoCs. ++ ++ This driver can also be built as a module. If so, the module will ++ be called i2c-rtl9300. ++ + config HAVE_S3C2410_I2C + bool + help +--- a/drivers/i2c/busses/Makefile ++++ b/drivers/i2c/busses/Makefile +@@ -94,6 +94,7 @@ obj-$(CONFIG_I2C_QCOM_GENI) += i2c-qcom- + obj-$(CONFIG_I2C_QUP) += i2c-qup.o + obj-$(CONFIG_I2C_RIIC) += i2c-riic.o + obj-$(CONFIG_I2C_RK3X) += i2c-rk3x.o ++obj-$(CONFIG_I2C_RTL9300) += i2c-rtl9300.o + obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o + obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o + obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o