From: Zhao Gang Date: Fri, 15 Jul 2016 10:00:04 +0000 (+0000) Subject: ar71xx: add support for gl-ar300m X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d963ddf0424a551e5fadd561c934bfdb5d198764;p=openwrt%2Fstaging%2Frobimarko.git ar71xx: add support for gl-ar300m This add initial support for gl-ar300m router. Product page: http://www.gl-inet.com/ar300m/ Signed-off-by: Zhao Gang --- diff --git a/package/boot/uboot-envtools/files/ar71xx b/package/boot/uboot-envtools/files/ar71xx index b45c1a2b9f..a075020fdb 100644 --- a/package/boot/uboot-envtools/files/ar71xx +++ b/package/boot/uboot-envtools/files/ar71xx @@ -22,6 +22,7 @@ carambola2 | \ cr3000 | \ cr5000 | \ eap300v2 | \ +gl-ar300m | \ hornet-ub | \ hornet-ub-x2 | \ jwap230 | \ diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 77bed5b73e..1254c711f4 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -262,6 +262,10 @@ gl-ar300) ucidef_set_led_wlan "wlan" "WLAN" "gl_ar300:wlan" "phy0tpt" ;; +gl-ar300m) + ucidef_set_led_wlan "wlan" "WLAN" "gl-ar300m:wlan" "phy0tpt" + ;; + gl-domino) ucidef_set_led_wlan "wlan" "WLAN" "domino:blue:wlan" "phy0tpt" ;; diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index 667d228410..301304ac3b 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -391,6 +391,7 @@ alfa-ap96 |\ alfa-nx |\ ap83 |\ gl-ar150 |\ +gl-ar300m |\ gl-domino |\ gl-inet |\ jwap003 |\ diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index f517f9bad3..71ebf89cd9 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -451,6 +451,9 @@ set_state() { done) status_led_on case $(ar71xx_board_name) in + gl-ar300m) + fw_printenv lc >/dev/null 2>&1 && fw_setenv "bootcount" 0 + ;; qihoo-c301) local n=$(fw_printenv activeregion | cut -d = -f 2) fw_setenv "image${n}trynum" 0 diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 4eed64b6fc..d1c92c97d2 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -536,6 +536,9 @@ ar71xx_board_detect() { *"GL AR300") name="gl-ar300" ;; + *"GL-AR300M") + name="gl-ar300m" + ;; *"EnGenius EPG5000") name="epg5000" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 119537e651..c5cb4aba35 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -233,6 +233,7 @@ platform_check_image() { ew-dorin-router | \ gl-ar150 | \ gl-ar300 | \ + gl-ar300m | \ gl-domino | \ hiwifi-hc6361 | \ hornet-ub-x2 | \ diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index 6605558826..1cae660b1a 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -89,6 +89,7 @@ CONFIG_ATH79_MACH_EW_DORIN=y CONFIG_ATH79_MACH_F9K1115V2=y CONFIG_ATH79_MACH_GL_AR150=y CONFIG_ATH79_MACH_GL_AR300=y +CONFIG_ATH79_MACH_GL_AR300M=y CONFIG_ATH79_MACH_GL_DOMINO=y CONFIG_ATH79_MACH_GL_INET=y CONFIG_ATH79_MACH_GS_MINIBOX_V1=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index b0eada1daf..a5c673cd2c 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -604,6 +604,16 @@ config ATH79_MACH_GL_AR300 select ATH79_DEV_USB select ATH79_DEV_WMAC +config ATH79_MACH_GL_AR300M + bool "GL_AR300M support" + select SOC_QCA953X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + config ATH79_MACH_GL_DOMINO bool "DOMINO support" select SOC_AR933X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 390b17d452..a49384a7e1 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -93,6 +93,7 @@ obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o obj-$(CONFIG_ATH79_MACH_GL_AR150) += mach-gl-ar150.o obj-$(CONFIG_ATH79_MACH_GL_AR300) += mach-gl-ar300.o +obj-$(CONFIG_ATH79_MACH_GL_AR300M) += mach-gl-ar300m.o obj-$(CONFIG_ATH79_MACH_GL_DOMINO) += mach-gl-domino.o obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o obj-$(CONFIG_ATH79_MACH_GS_MINIBOX_V1) += mach-gs-minibox-v1.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c new file mode 100644 index 0000000000..d0f993c032 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c @@ -0,0 +1,182 @@ +/* + * GLI AR300M(D) board support + * + * Copyright (C) 2011 dongyuqi <729650915@qq.com> + * Copyright (C) 2011-2012 Gabor Juhos + * Copyright (C) 2013 alzhao + * Copyright (C) 2014 Michel Stempin + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include + +#include +#include + +#include "common.h" +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "dev-spi.h" +#include "dev-wmac.h" +#include "machtypes.h" +#include "pci.h" + +#define GL_AR300M_GPIO_LED_USB 2 +#define GL_AR300M_GPIO_LED_WLAN 14 +#define GL_AR300M_GPIO_LED_LAN 13 +#define GL_AR300M_GPIO_LED_SYSTEM 12 +#define GL_AR300M_GPIO_BTN_RESET 3 +#define GL_AR300M_GPIO_BTN_LEFT 0 +#define GL_AR300M_GPIO_BTN_RIGHT 1 + +#define GL_AR300M_KEYS_POLL_INTERVAL 20 /* msecs */ +#define GL_AR300M_KEYS_DEBOUNCE_INTERVAL (3 * GL_AR300M_KEYS_POLL_INTERVAL) + +#define GL_AR300M_MAC0_OFFSET 0 +#define GL_AR300M_MAC1_OFFSET 6 +#define GL_AR300M_WMAC_CALDATA_OFFSET 0x1000 +#define GL_AR300M_PCIE_CALDATA_OFFSET 0x5000 + +static struct gpio_led gl_ar300m_leds_gpio[] __initdata = { + { + .name = "gl-ar300m:usb", + .gpio = GL_AR300M_GPIO_LED_USB, + .active_low = 0, + .default_state = 1, + }, + { + .name = "gl-ar300m:wlan", + .gpio = GL_AR300M_GPIO_LED_WLAN, + .active_low = 1, + }, + { + .name = "gl-ar300m:lan", + .gpio = GL_AR300M_GPIO_LED_LAN, + .active_low = 1, + }, + { + .name = "gl-ar300m:system", + .gpio = GL_AR300M_GPIO_LED_SYSTEM, + .active_low = 1, + .default_state = 1, + }, +}; + +static struct gpio_keys_button gl_ar300m_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = GL_AR300M_KEYS_DEBOUNCE_INTERVAL, + .gpio = GL_AR300M_GPIO_BTN_RESET, + .active_low = 1, + }, + { + .desc = "button right", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = GL_AR300M_KEYS_DEBOUNCE_INTERVAL, + .gpio = GL_AR300M_GPIO_BTN_LEFT, + .active_low = 0, + }, + { + .desc = "button left", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = GL_AR300M_KEYS_DEBOUNCE_INTERVAL, + .gpio = GL_AR300M_GPIO_BTN_RIGHT, + .active_low = 0, + }, +}; + +static struct ath79_spi_controller_data gl_ar300m_spi0_cdata = +{ + .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, + .is_flash = true, + .cs_line = 0, +}; + +static struct ath79_spi_controller_data gl_ar300m_spi1_cdata = +{ + .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, + .is_flash = false, + .cs_line = 1, +}; + +static struct spi_board_info gl_ar300m_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "m25p80", + .controller_data = &gl_ar300m_spi0_cdata, + .platform_data = NULL, + }, + { + .bus_num = 0, + .chip_select = 1, + .max_speed_hz = 25000000, + .modalias = "ath79-spinand", + .controller_data = &gl_ar300m_spi1_cdata, + .platform_data = NULL, + } +}; + +static struct ath79_spi_platform_data gl_ar300m_spi_data = { + .bus_num = 0, + .num_chipselect = 2, +}; + +static void __init gl_ar300m_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + u8 tmpmac[ETH_ALEN]; + + ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE); + ath79_register_spi(&gl_ar300m_spi_data, gl_ar300m_spi_info, 2); + + /* register gpio LEDs and keys */ + ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar300m_leds_gpio), + gl_ar300m_leds_gpio); + ath79_register_gpio_keys_polled(-1, GL_AR300M_KEYS_POLL_INTERVAL, + ARRAY_SIZE(gl_ar300m_gpio_keys), + gl_ar300m_gpio_keys); + + ath79_register_mdio(0, 0x0); + + /* WAN */ + ath79_init_mac(ath79_eth0_data.mac_addr, art + GL_AR300M_MAC0_OFFSET, 0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.speed = SPEED_100; + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_data.phy_mask = BIT(4); + ath79_register_eth(0); + + /* LAN */ + ath79_init_mac(ath79_eth1_data.mac_addr, art + GL_AR300M_MAC1_OFFSET, 0); + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_eth1_data.speed = SPEED_1000; + ath79_eth1_data.duplex = DUPLEX_FULL; + ath79_switch_data.phy_poll_mask |= BIT(4); + ath79_switch_data.phy4_mii_en = 1; + ath79_register_eth(1); + + ath79_init_mac(tmpmac, art + GL_AR300M_WMAC_CALDATA_OFFSET + 2, 0); + ath79_register_wmac(art + GL_AR300M_WMAC_CALDATA_OFFSET, tmpmac); + + /* enable usb */ + ath79_register_usb(); + /* enable pci */ + ath79_register_pci(); +} + +MIPS_MACHINE(ATH79_MACH_GL_AR300M, "GL-AR300M", "GL-AR300M", + gl_ar300m_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 7dd60acfff..3e52ee4122 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -86,6 +86,7 @@ enum ath79_mach_type { ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */ ATH79_MACH_GL_AR150, /* GL-AR150 support */ ATH79_MACH_GL_AR300, /* GL-AR300 */ + ATH79_MACH_GL_AR300M, /* GL-AR300M */ ATH79_MACH_GL_DOMINO, /* Domino */ ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */ ATH79_MACH_GS_MINIBOX_V1, /* Gainstrong MiniBox V1.0 */ diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk index cbb47f5fe2..b417a3fb15 100644 --- a/target/linux/ar71xx/image/generic.mk +++ b/target/linux/ar71xx/image/generic.mk @@ -57,6 +57,16 @@ define Device/gl-ar300 endef TARGET_DEVICES += gl-ar300 +define Device/gl-ar300m + DEVICE_TITLE := GL AR300M + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 uboot-envtools + BOARDNAME = GL-AR300M + IMAGE_SIZE = 16000k + CONSOLE = ttyS0,115200 + MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro +endef +TARGET_DEVICES += gl-ar300m + define Device/gl-domino DEVICE_TITLE := GL Domino Pi DEVICE_PACKAGES := kmod-usb-core kmod-usb2