From: Jonas Gorski Date: Mon, 30 Mar 2015 20:20:15 +0000 (+0000) Subject: brcm63xx: use relocate to move the kernel back to start of ram X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d8ba40cfcdd509e7e1ed68878cb93d9a81e245b6;p=openwrt%2Fstaging%2Fadrian.git brcm63xx: use relocate to move the kernel back to start of ram Appearently the kernel only uses kernel above it, so moving it to an higher address causes a lot of unavailable memory (#19327). Also move the on-flash kernel to 0x80a0000, as newer CFEs don't like uncompressing there (net-booting an ELF kernel is fine, though). Signed-off-by: Jonas Gorski SVN-Revision: 45164 --- diff --git a/target/linux/brcm63xx/image/Makefile b/target/linux/brcm63xx/image/Makefile index c94d06e9d7..9f5d68204c 100755 --- a/target/linux/brcm63xx/image/Makefile +++ b/target/linux/brcm63xx/image/Makefile @@ -7,8 +7,9 @@ include $(TOPDIR)/rules.mk include $(INCLUDE_DIR)/image.mk -LOADADDR = 0x80800000 # RAM start + 8MB +LOADADDR = 0x80010000 # RAM start + 64K KERNEL_ENTRY = $(LOADADDR) # Newer kernels add a jmp to the kernel_entry at the start of the binary +LOADER_ENTRY = 0x80a00000 # RAM start + 10M, for relocate RAMSIZE = 0x02000000 # 32MB LZMA_TEXT_START = 0x81800000 # 32MB - 8MB @@ -19,6 +20,12 @@ LOADER_MAKEOPTS= \ RAMSIZE=$(RAMSIZE) \ LZMA_TEXT_START=$(LZMA_TEXT_START) \ +RELOCATE_MAKEOPTS= \ + CACHELINE_SIZE=16 \ + KERNEL_ADDR=$(KERNEL_ENTRY) \ + CROSS_COMPILE=$(TARGET_CROSS) \ + LZMA_TEXT_START=$(LOADER_ENTRY) + define rootfspad/jffs2-128k --align-rootfs endef @@ -42,8 +49,8 @@ define Image/Build/CFEDTB # Generate the tagged image $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux-$(3).lzma.cfe -f $(KDIR)/root.$(1) \ --output $(BIN_DIR)/openwrt-$(2)-$(1)-cfe.bin \ - --boardid $(4) --chipid $(5) --entry $(KERNEL_ENTRY) \ - --load-addr $(LOADADDR) --info1 "-$(call Image/LimitName16,$(2))" \ + --boardid $(4) --chipid $(5) --entry $(LOADER_ENTRY) \ + --load-addr $(LOADER_ENTRY) --info1 "-$(call Image/LimitName16,$(2))" \ $(call rootfspad/$(1)) \ --info2 $(1) $(6) endef @@ -51,7 +58,7 @@ endef define Image/Build/OLDCFEDTB # Generate the tagged image $(TOPDIR)/scripts/brcmImage.pl -t -p \ - -b $(4) -c $(5) -e $(KERNEL_ENTRY) -a $(LOADADDR) \ + -b $(4) -c $(5) -e $(LOADER_ENTRY) -a $(LOADER_ENTRY) \ -k $(KDIR)/vmlinux-$(3).lzma.cfe -r $(KDIR)/root.$(1) \ -o $(BIN_DIR)/openwrt-$(2)-$(1)-cfe.bin $(6) endef @@ -60,9 +67,9 @@ define Image/Build/SPW303VCFEDTB # Generate the tagged image $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux-$(3).lzma.cfe -f $(KDIR)/root.$(1) \ --output $(BIN_DIR)/openwrt-$(2)-$(1).tmp \ - --boardid $(4) --chipid $(5) --entry $(KERNEL_ENTRY) \ + --boardid $(4) --chipid $(5) --entry $(LOADER_ENTRY) \ $(call rootfspad/$(1)) \ - --load-addr $(LOADADDR) $(6) + --load-addr $(LOADER_ENTRY) $(6) # Fix up header $(STAGING_DIR_HOST)/bin/spw303v -i $(BIN_DIR)/openwrt-$(2)-$(1).tmp \ -o $(BIN_DIR)/openwrt-$(2)-$(1)-cfe-sysupgrade.bin @@ -73,10 +80,10 @@ endef define Image/Build/ZYXCFEDTB # Generate the tagged image - $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux-$(3).lzma.cfe -f $(KDIR)/root.$(1) \ + $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux-relocate-$(3).lzma.cfe -f $(KDIR)/root.$(1) \ --output $(BIN_DIR)/openwrt-$(2)-$(1).tmp \ - --boardid $(4) --chipid $(5) --entry $(KERNEL_ENTRY) \ - --load-addr $(LOADADDR) --info1 "-$(call Image/LimitName16,$(2))" \ + --boardid $(4) --chipid $(5) --entry $(LOADER_ENTRY) \ + --load-addr $(LOADER_ENTRY) --info1 "-$(call Image/LimitName16,$(2))" \ $(call rootfspad/$(1)) \ --info2 $(1) $(6) # Fix up header @@ -162,16 +169,27 @@ define Image/PrepareLoaderDTB endef define Image/PrepareCFELzmaKernel + # CFE only allows ~4 MiB for the uncompressed kernels, but uncompressed + # kernel might get larger than that, so let CFE unpack and load at a + # higher address and make the kernel relocate itself to the expected + # location. + ( \ + dd if=$(KDIR)/relocate/loader.bin bs=32 conv=sync && \ + perl -e '@s = stat("$(KDIR)/vmlinux$(1)"); print pack("N", @s[7])' && \ + cat $(KDIR)/vmlinux$(1) \ + ) > $(KDIR)/vmlinux-relocate$(1) + # CFE is a LZMA nazi! It took me hours to find out the parameters! # Also I think lzma has a bug cause it generates different output depending on # if you use stdin / stdout or not. Use files instead of stdio here, cause # otherwise CFE will complain and not boot the image. - $(STAGING_DIR_HOST)/bin/lzma e -d22 -fb64 -a1 $(KDIR)/vmlinux$(1) $(KDIR)/vmlinux$(1).lzma.tmp + $(STAGING_DIR_HOST)/bin/lzma e -d22 -fb64 -a1 $(KDIR)/vmlinux-relocate$(1) $(KDIR)/vmlinux$(1).lzma.tmp # Strip out the length, CFE doesn't like this dd if=$(KDIR)/vmlinux$(1).lzma.tmp of=$(KDIR)/vmlinux$(1).lzma.cfe bs=5 count=1 dd if=$(KDIR)/vmlinux$(1).lzma.tmp of=$(KDIR)/vmlinux$(1).lzma.cfe ibs=13 obs=5 skip=1 seek=1 conv=notrunc rm -f $(KDIR)/vmlinux$(1).lzma.tmp + rm -f $(KDIR)/vmlinux-relocate$(1) endef define Image/PrepareCFELzmaKernelDTB @@ -182,6 +200,11 @@ define Image/PrepareCFELzmaKernelDTB endef define Image/Prepare + # build relocation code first + rm -rf $(KDIR)/relocate + $(CP) ../../generic/image/relocate $(KDIR) + $(MAKE) -C $(KDIR)/relocate $(RELOCATE_MAKEOPTS) + $(call Image/PrepareCFELzmaKernel,) $(foreach board,$(sort $(TARGET_$(PROFILE)_DTBS)), $(call Image/PrepareCFELzmaKernelDTB,$(board))) diff --git a/target/linux/brcm63xx/patches-3.18/810-BCM63XX-move-kernel-behind-CFE.patch b/target/linux/brcm63xx/patches-3.18/810-BCM63XX-move-kernel-behind-CFE.patch deleted file mode 100644 index b161edbd72..0000000000 --- a/target/linux/brcm63xx/patches-3.18/810-BCM63XX-move-kernel-behind-CFE.patch +++ /dev/null @@ -1,29 +0,0 @@ -From b99815f47828214b298178b0d0e2a9f3aae9f24a Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 22 Mar 2015 11:49:16 +0100 -Subject: [PATCH] MIPS: BCM63XX: move kernel behind CFE - -CFE will load itself to offset 4 MiB (or 6 MiB) in memory occupying a -bit over one MiB. Traditionally the kernel will get linked to and loaded -at offset 64k. -This will pose a problem if the kernel size reaches 4 MiB - 64 kB, as -CFE will start overwriting itself. This can easily happen by including a -ramdisk image in the kernel. -While for net-booted elf kernels this can be worked around by wrapping -them in a lzma boot loader, on-flash images require the kernel to be -lzma compressed. This would cause inefficient double compression. - -Luckily we have full control over where the kernel will be extracted to -and the entry point to be called, so move the kernel to behind CFE. ---- - arch/mips/bcm63xx/Platform | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/mips/bcm63xx/Platform -+++ b/arch/mips/bcm63xx/Platform -@@ -4,4 +4,4 @@ - platform-$(CONFIG_BCM63XX) += bcm63xx/ - cflags-$(CONFIG_BCM63XX) += \ - -I$(srctree)/arch/mips/include/asm/mach-bcm63xx/ --load-$(CONFIG_BCM63XX) := 0xffffffff80010000 -+load-$(CONFIG_BCM63XX) := 0xffffffff80800000