From: Matthew Hagan Date: Fri, 1 Oct 2021 20:06:27 +0000 (+0100) Subject: kernel: 5.10: backport QCA83x PHY resume fix, DAC amplitude preferred master, debug... X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d888ef5668a9243259381c57439ab5486009b05b;p=openwrt%2Fstaging%2Fnbd.git kernel: 5.10: backport QCA83x PHY resume fix, DAC amplitude preferred master, debug reg names Backport workaround for QCA8327 PHY resume, which does not properly support genphy_suspend/resume. Also add DAC amplitude fix for the QCA8327 PHY, set port to preferred master and add proper names to debug regs. Signed-off-by: Ansuel Smith Signed-off-by: Matthew Hagan --- diff --git a/target/linux/generic/backport-5.10/796-v5.16-01-net-phy-at803x-fix-resume-for-QCA8327-phy.patch b/target/linux/generic/backport-5.10/796-v5.16-01-net-phy-at803x-fix-resume-for-QCA8327-phy.patch new file mode 100644 index 0000000000..5dfe27dd24 --- /dev/null +++ b/target/linux/generic/backport-5.10/796-v5.16-01-net-phy-at803x-fix-resume-for-QCA8327-phy.patch @@ -0,0 +1,131 @@ +From ba3c01ee02ed0d821c9f241f179bbc9457542b8f Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Sun, 10 Oct 2021 00:46:15 +0200 +Subject: net: phy: at803x: fix resume for QCA8327 phy + +From Documentation phy resume triggers phy reset and restart +auto-negotiation. Add a dedicated function to wait reset to finish as +it was notice a regression where port sometime are not reliable after a +suspend/resume session. The reset wait logic is copied from phy_poll_reset. +Add dedicated suspend function to use genphy_suspend only with QCA8337 +phy and set only additional debug settings for QCA8327. With more test +it was reported that QCA8327 doesn't proprely support this mode and +using this cause the unreliability of the switch ports, especially the +malfunction of the port0. + +Fixes: 15b9df4ece17 ("net: phy: at803x: add resume/suspend function to qca83xx phy") +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 69 +++++++++++++++++++++++++++++++++++++++++++----- + 1 file changed, 63 insertions(+), 6 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -92,9 +92,14 @@ + #define AT803X_DEBUG_REG_5 0x05 + #define AT803X_DEBUG_TX_CLK_DLY_EN BIT(8) + ++#define AT803X_DEBUG_REG_HIB_CTRL 0x0b ++#define AT803X_DEBUG_HIB_CTRL_SEL_RST_80U BIT(10) ++#define AT803X_DEBUG_HIB_CTRL_EN_ANY_CHANGE BIT(13) ++ + #define AT803X_DEBUG_REG_3C 0x3C + + #define AT803X_DEBUG_REG_3D 0x3D ++#define AT803X_DEBUG_GATE_CLK_IN1000 BIT(6) + + #define AT803X_DEBUG_REG_1F 0x1F + #define AT803X_DEBUG_PLL_ON BIT(2) +@@ -1220,6 +1225,58 @@ static int qca83xx_config_init(struct ph + return 0; + } + ++static int qca83xx_resume(struct phy_device *phydev) ++{ ++ int ret, val; ++ ++ /* Skip reset if not suspended */ ++ if (!phydev->suspended) ++ return 0; ++ ++ /* Reinit the port, reset values set by suspend */ ++ qca83xx_config_init(phydev); ++ ++ /* Reset the port on port resume */ ++ phy_set_bits(phydev, MII_BMCR, BMCR_RESET | BMCR_ANENABLE); ++ ++ /* On resume from suspend the switch execute a reset and ++ * restart auto-negotiation. Wait for reset to complete. ++ */ ++ ret = phy_read_poll_timeout(phydev, MII_BMCR, val, !(val & BMCR_RESET), ++ 50000, 600000, true); ++ if (ret) ++ return ret; ++ ++ msleep(1); ++ ++ return 0; ++} ++ ++static int qca83xx_suspend(struct phy_device *phydev) ++{ ++ u16 mask = 0; ++ ++ /* Only QCA8337 support actual suspend. ++ * QCA8327 cause port unreliability when phy suspend ++ * is set. ++ */ ++ if (phydev->drv->phy_id == QCA8337_PHY_ID) { ++ genphy_suspend(phydev); ++ } else { ++ mask |= ~(BMCR_SPEED1000 | BMCR_FULLDPLX); ++ phy_modify(phydev, MII_BMCR, mask, 0); ++ } ++ ++ at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_3D, ++ AT803X_DEBUG_GATE_CLK_IN1000, 0); ++ ++ at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_HIB_CTRL, ++ AT803X_DEBUG_HIB_CTRL_EN_ANY_CHANGE | ++ AT803X_DEBUG_HIB_CTRL_SEL_RST_80U, 0); ++ ++ return 0; ++} ++ + static struct phy_driver at803x_driver[] = { + { + /* Qualcomm Atheros AR8035 */ +@@ -1329,8 +1386,8 @@ static struct phy_driver at803x_driver[] + .get_sset_count = at803x_get_sset_count, + .get_strings = at803x_get_strings, + .get_stats = at803x_get_stats, +- .suspend = genphy_suspend, +- .resume = genphy_resume, ++ .suspend = qca83xx_suspend, ++ .resume = qca83xx_resume, + }, { + /* QCA8327-A from switch QCA8327-AL1A */ + .phy_id = QCA8327_A_PHY_ID, +@@ -1344,8 +1401,8 @@ static struct phy_driver at803x_driver[] + .get_sset_count = at803x_get_sset_count, + .get_strings = at803x_get_strings, + .get_stats = at803x_get_stats, +- .suspend = genphy_suspend, +- .resume = genphy_resume, ++ .suspend = qca83xx_suspend, ++ .resume = qca83xx_resume, + }, { + /* QCA8327-B from switch QCA8327-BL1A */ + .phy_id = QCA8327_B_PHY_ID, +@@ -1359,8 +1416,8 @@ static struct phy_driver at803x_driver[] + .get_sset_count = at803x_get_sset_count, + .get_strings = at803x_get_strings, + .get_stats = at803x_get_stats, +- .suspend = genphy_suspend, +- .resume = genphy_resume, ++ .suspend = qca83xx_suspend, ++ .resume = qca83xx_resume, + }, }; + + module_phy_driver(at803x_driver); diff --git a/target/linux/generic/backport-5.10/796-v5.16-02-net-phy-at803x-add-DAC-amplitude-fix-for-8327-phy.patch b/target/linux/generic/backport-5.10/796-v5.16-02-net-phy-at803x-add-DAC-amplitude-fix-for-8327-phy.patch new file mode 100644 index 0000000000..aeb43e2f67 --- /dev/null +++ b/target/linux/generic/backport-5.10/796-v5.16-02-net-phy-at803x-add-DAC-amplitude-fix-for-8327-phy.patch @@ -0,0 +1,91 @@ +From 1ca8311949aec5c9447645731ef1c6bc5bd71350 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Sun, 10 Oct 2021 00:46:16 +0200 +Subject: net: phy: at803x: add DAC amplitude fix for 8327 phy + +QCA8327 internal phy require DAC amplitude adjustement set to +6% with +100m speed. Also add additional define to report a change of the same +reg in QCA8337. (different scope it does set 1000m voltage) +Add link_change_notify function to set the proper amplitude adjustement +on PHY_RUNNING state and disable on any other state. + +Fixes: b4df02b562f4 ("net: phy: at803x: add support for qca 8327 A variant internal phy") +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 33 +++++++++++++++++++++++++++++++++ + 1 file changed, 33 insertions(+) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -87,6 +87,8 @@ + #define AT803X_PSSR_MR_AN_COMPLETE 0x0200 + + #define AT803X_DEBUG_REG_0 0x00 ++#define QCA8327_DEBUG_MANU_CTRL_EN BIT(2) ++#define QCA8337_DEBUG_MANU_CTRL_EN GENMASK(3, 2) + #define AT803X_DEBUG_RX_CLK_DLY_EN BIT(15) + + #define AT803X_DEBUG_REG_5 0x05 +@@ -1222,9 +1224,37 @@ static int qca83xx_config_init(struct ph + break; + } + ++ /* QCA8327 require DAC amplitude adjustment for 100m set to +6%. ++ * Disable on init and enable only with 100m speed following ++ * qca original source code. ++ */ ++ if (phydev->drv->phy_id == QCA8327_A_PHY_ID || ++ phydev->drv->phy_id == QCA8327_B_PHY_ID) ++ at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, ++ QCA8327_DEBUG_MANU_CTRL_EN, 0); ++ + return 0; + } + ++static void qca83xx_link_change_notify(struct phy_device *phydev) ++{ ++ /* QCA8337 doesn't require DAC Amplitude adjustement */ ++ if (phydev->drv->phy_id == QCA8337_PHY_ID) ++ return; ++ ++ /* Set DAC Amplitude adjustment to +6% for 100m on link running */ ++ if (phydev->state == PHY_RUNNING) { ++ if (phydev->speed == SPEED_100) ++ at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, ++ QCA8327_DEBUG_MANU_CTRL_EN, ++ QCA8327_DEBUG_MANU_CTRL_EN); ++ } else { ++ /* Reset DAC Amplitude adjustment */ ++ at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, ++ QCA8327_DEBUG_MANU_CTRL_EN, 0); ++ } ++} ++ + static int qca83xx_resume(struct phy_device *phydev) + { + int ret, val; +@@ -1379,6 +1409,7 @@ static struct phy_driver at803x_driver[] + .phy_id_mask = QCA8K_PHY_ID_MASK, + .name = "Qualcomm Atheros 8337 internal PHY", + /* PHY_GBIT_FEATURES */ ++ .link_change_notify = qca83xx_link_change_notify, + .probe = at803x_probe, + .flags = PHY_IS_INTERNAL, + .config_init = qca83xx_config_init, +@@ -1394,6 +1425,7 @@ static struct phy_driver at803x_driver[] + .phy_id_mask = QCA8K_PHY_ID_MASK, + .name = "Qualcomm Atheros 8327-A internal PHY", + /* PHY_GBIT_FEATURES */ ++ .link_change_notify = qca83xx_link_change_notify, + .probe = at803x_probe, + .flags = PHY_IS_INTERNAL, + .config_init = qca83xx_config_init, +@@ -1409,6 +1441,7 @@ static struct phy_driver at803x_driver[] + .phy_id_mask = QCA8K_PHY_ID_MASK, + .name = "Qualcomm Atheros 8327-B internal PHY", + /* PHY_GBIT_FEATURES */ ++ .link_change_notify = qca83xx_link_change_notify, + .probe = at803x_probe, + .flags = PHY_IS_INTERNAL, + .config_init = qca83xx_config_init, diff --git a/target/linux/generic/backport-5.10/796-v5.16-03-net-phy-at803x-enable-prefer-master-for-83xx-interna.patch b/target/linux/generic/backport-5.10/796-v5.16-03-net-phy-at803x-enable-prefer-master-for-83xx-interna.patch new file mode 100644 index 0000000000..2352fa0e44 --- /dev/null +++ b/target/linux/generic/backport-5.10/796-v5.16-03-net-phy-at803x-enable-prefer-master-for-83xx-interna.patch @@ -0,0 +1,27 @@ +From 9d1c29b4028557a496be9c5eb2b4b86063700636 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Sun, 10 Oct 2021 00:46:17 +0200 +Subject: net: phy: at803x: enable prefer master for 83xx internal phy + +From original QCA source code the port was set to prefer master as port +type in 1000BASE-T mode. Apply the same settings also here. + +Signed-off-by: Ansuel Smith +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -1233,6 +1233,9 @@ static int qca83xx_config_init(struct ph + at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, + QCA8327_DEBUG_MANU_CTRL_EN, 0); + ++ /* Following original QCA sourcecode set port to prefer master */ ++ phy_set_bits(phydev, MII_CTRL1000, CTL1000_PREFER_MASTER); ++ + return 0; + } + diff --git a/target/linux/generic/backport-5.10/796-v5.16-04-net-phy-at803x-better-describe-debug-regs.patch b/target/linux/generic/backport-5.10/796-v5.16-04-net-phy-at803x-better-describe-debug-regs.patch new file mode 100644 index 0000000000..9c28a893f1 --- /dev/null +++ b/target/linux/generic/backport-5.10/796-v5.16-04-net-phy-at803x-better-describe-debug-regs.patch @@ -0,0 +1,127 @@ +From 67999555ff42e91de7654488d9a7735bd9e84555 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Sun, 10 Oct 2021 00:46:18 +0200 +Subject: net: phy: at803x: better describe debug regs + +Give a name to known debug regs from Documentation instead of using +unknown hex values. + +Signed-off-by: Ansuel Smith +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 30 +++++++++++++++--------------- + 1 file changed, 15 insertions(+), 15 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -86,12 +86,12 @@ + #define AT803X_PSSR 0x11 /*PHY-Specific Status Register*/ + #define AT803X_PSSR_MR_AN_COMPLETE 0x0200 + +-#define AT803X_DEBUG_REG_0 0x00 ++#define AT803X_DEBUG_ANALOG_TEST_CTRL 0x00 + #define QCA8327_DEBUG_MANU_CTRL_EN BIT(2) + #define QCA8337_DEBUG_MANU_CTRL_EN GENMASK(3, 2) + #define AT803X_DEBUG_RX_CLK_DLY_EN BIT(15) + +-#define AT803X_DEBUG_REG_5 0x05 ++#define AT803X_DEBUG_SYSTEM_CTRL_MODE 0x05 + #define AT803X_DEBUG_TX_CLK_DLY_EN BIT(8) + + #define AT803X_DEBUG_REG_HIB_CTRL 0x0b +@@ -100,7 +100,7 @@ + + #define AT803X_DEBUG_REG_3C 0x3C + +-#define AT803X_DEBUG_REG_3D 0x3D ++#define AT803X_DEBUG_REG_GREEN 0x3D + #define AT803X_DEBUG_GATE_CLK_IN1000 BIT(6) + + #define AT803X_DEBUG_REG_1F 0x1F +@@ -274,25 +274,25 @@ static int at803x_read_page(struct phy_d + + static int at803x_enable_rx_delay(struct phy_device *phydev) + { +- return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, 0, ++ return at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, 0, + AT803X_DEBUG_RX_CLK_DLY_EN); + } + + static int at803x_enable_tx_delay(struct phy_device *phydev) + { +- return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, 0, ++ return at803x_debug_reg_mask(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, 0, + AT803X_DEBUG_TX_CLK_DLY_EN); + } + + static int at803x_disable_rx_delay(struct phy_device *phydev) + { +- return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, ++ return at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, + AT803X_DEBUG_RX_CLK_DLY_EN, 0); + } + + static int at803x_disable_tx_delay(struct phy_device *phydev) + { +- return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, ++ return at803x_debug_reg_mask(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, + AT803X_DEBUG_TX_CLK_DLY_EN, 0); + } + +@@ -1208,9 +1208,9 @@ static int qca83xx_config_init(struct ph + switch (switch_revision) { + case 1: + /* For 100M waveform */ +- at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_0, 0x02ea); ++ at803x_debug_reg_write(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, 0x02ea); + /* Turn on Gigabit clock */ +- at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3D, 0x68a0); ++ at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x68a0); + break; + + case 2: +@@ -1218,8 +1218,8 @@ static int qca83xx_config_init(struct ph + fallthrough; + case 4: + phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_AZ_DEBUG, 0x803f); +- at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3D, 0x6860); +- at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_5, 0x2c46); ++ at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x6860); ++ at803x_debug_reg_write(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, 0x2c46); + at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3C, 0x6000); + break; + } +@@ -1230,7 +1230,7 @@ static int qca83xx_config_init(struct ph + */ + if (phydev->drv->phy_id == QCA8327_A_PHY_ID || + phydev->drv->phy_id == QCA8327_B_PHY_ID) +- at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, ++ at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, + QCA8327_DEBUG_MANU_CTRL_EN, 0); + + /* Following original QCA sourcecode set port to prefer master */ +@@ -1248,12 +1248,12 @@ static void qca83xx_link_change_notify(s + /* Set DAC Amplitude adjustment to +6% for 100m on link running */ + if (phydev->state == PHY_RUNNING) { + if (phydev->speed == SPEED_100) +- at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, ++ at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, + QCA8327_DEBUG_MANU_CTRL_EN, + QCA8327_DEBUG_MANU_CTRL_EN); + } else { + /* Reset DAC Amplitude adjustment */ +- at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, ++ at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, + QCA8327_DEBUG_MANU_CTRL_EN, 0); + } + } +@@ -1300,7 +1300,7 @@ static int qca83xx_suspend(struct phy_de + phy_modify(phydev, MII_BMCR, mask, 0); + } + +- at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_3D, ++ at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_GREEN, + AT803X_DEBUG_GATE_CLK_IN1000, 0); + + at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_HIB_CTRL, diff --git a/target/linux/generic/pending-5.10/730-net-phy-at803x-fix-feature-detection.patch b/target/linux/generic/pending-5.10/730-net-phy-at803x-fix-feature-detection.patch index 5caed73372..c49bb19601 100644 --- a/target/linux/generic/pending-5.10/730-net-phy-at803x-fix-feature-detection.patch +++ b/target/linux/generic/pending-5.10/730-net-phy-at803x-fix-feature-detection.patch @@ -20,7 +20,7 @@ Signed-off-by: David Bauer --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c -@@ -1025,6 +1025,34 @@ static int at803x_set_tunable(struct phy +@@ -1032,6 +1032,34 @@ static int at803x_set_tunable(struct phy } } @@ -55,7 +55,7 @@ Signed-off-by: David Bauer static int at803x_cable_test_result_trans(u16 status) { switch (FIELD_GET(AT803X_CDT_STATUS_STAT_MASK, status)) { -@@ -1274,7 +1302,7 @@ static struct phy_driver at803x_driver[] +@@ -1364,7 +1392,7 @@ static struct phy_driver at803x_driver[] .resume = at803x_resume, .read_page = at803x_read_page, .write_page = at803x_write_page,