From: Mac Michaels Date: Fri, 8 Jul 2005 00:58:29 +0000 (-0700) Subject: [PATCH] dvb: frontend: add driver for LGDT3302 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d8667cbbe440aacb246832afc217a6a44664115c;p=openwrt%2Fstaging%2Fblogic.git [PATCH] dvb: frontend: add driver for LGDT3302 Add support for LGDT3302 (ATSC VSB/QAM) used in DViCO FusionHDTV3 Gold. Signed-off-by: Mac Michaels Signed-off-by: Michael Krufky Signed-off-by: Johannes Stezenbach Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index 5c695937e2ad..d847c62bd837 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -187,4 +187,11 @@ config DVB_BCM3510 An ATSC 8VSB/16VSB and QAM64/256 tuner module. Say Y when you want to support this frontend. +config DVB_LGDT3302 + tristate "LGDT3302 based (DViCO FusionHDTV3 Gold)" + depends on DVB_CORE + help + An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want + to support this frontend. + endmenu diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile index 8d46dd721f45..de5e240cba7f 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb/frontends/Makefile @@ -30,3 +30,4 @@ obj-$(CONFIG_DVB_OR51211) += or51211.o obj-$(CONFIG_DVB_OR51132) += or51132.o obj-$(CONFIG_DVB_BCM3510) += bcm3510.o obj-$(CONFIG_DVB_S5H1420) += s5h1420.o +obj-$(CONFIG_DVB_LGDT3302) += lgdt3302.o diff --git a/drivers/media/dvb/frontends/dvb-pll.c b/drivers/media/dvb/frontends/dvb-pll.c index 8be143b7ce4c..71e06ec7925a 100644 --- a/drivers/media/dvb/frontends/dvb-pll.c +++ b/drivers/media/dvb/frontends/dvb-pll.c @@ -93,6 +93,19 @@ struct dvb_pll_desc dvb_pll_lg_z201 = { }; EXPORT_SYMBOL(dvb_pll_lg_z201); +struct dvb_pll_desc dvb_pll_microtune_4042 = { + .name = "Microtune 4042 FI5", + .min = 57000000, + .max = 858000000, + .count = 3, + .entries = { + { 162000000, 44000000, 62500, 0x8e, 0xa1 }, + { 457000000, 44000000, 62500, 0x8e, 0x91 }, + { 999999999, 44000000, 62500, 0x8e, 0x31 }, + }, +}; +EXPORT_SYMBOL(dvb_pll_microtune_4042); + struct dvb_pll_desc dvb_pll_unknown_1 = { .name = "unknown 1", /* used by dntv live dvb-t */ .min = 174000000, diff --git a/drivers/media/dvb/frontends/dvb-pll.h b/drivers/media/dvb/frontends/dvb-pll.h index 57b64ffee402..98312bfe59d0 100644 --- a/drivers/media/dvb/frontends/dvb-pll.h +++ b/drivers/media/dvb/frontends/dvb-pll.h @@ -24,6 +24,7 @@ extern struct dvb_pll_desc dvb_pll_thomson_dtt7579; extern struct dvb_pll_desc dvb_pll_thomson_dtt759x; extern struct dvb_pll_desc dvb_pll_thomson_dtt7610; extern struct dvb_pll_desc dvb_pll_lg_z201; +extern struct dvb_pll_desc dvb_pll_microtune_4042; extern struct dvb_pll_desc dvb_pll_unknown_1; extern struct dvb_pll_desc dvb_pll_tua6010xs; diff --git a/drivers/media/dvb/frontends/lgdt3302.c b/drivers/media/dvb/frontends/lgdt3302.c new file mode 100644 index 000000000000..d0b91219cf6e --- /dev/null +++ b/drivers/media/dvb/frontends/lgdt3302.c @@ -0,0 +1,618 @@ +/* + * $Id: lgdt3302.c,v 1.2 2005/06/28 23:50:48 mkrufky Exp $ + * + * Support for LGDT3302 (DViCO FustionHDTV 3 Gold) - VSB/QAM + * + * Copyright (C) 2005 Wilson Michaels + * + * Based on code from Kirk Lapray + * Copyright (C) 2005 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +/* + * NOTES ABOUT THIS DRIVER + * + * This driver supports DViCO FusionHDTV 3 Gold under Linux. + * + * TODO: + * BER and signal strength always return 0. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" +#include "dvb-pll.h" +#include "lgdt3302_priv.h" +#include "lgdt3302.h" + +static int debug = 0; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug,"Turn on/off lgdt3302 frontend debugging (default:off)."); +#define dprintk(args...) \ +do { \ +if (debug) printk(KERN_DEBUG "lgdt3302: " args); \ +} while (0) + +struct lgdt3302_state +{ + struct i2c_adapter* i2c; + struct dvb_frontend_ops ops; + + /* Configuration settings */ + const struct lgdt3302_config* config; + + struct dvb_frontend frontend; + + /* Demodulator private data */ + fe_modulation_t current_modulation; + + /* Tuner private data */ + u32 current_frequency; +}; + +static int i2c_writebytes (struct lgdt3302_state* state, + u8 addr, /* demod_address or pll_address */ + u8 *buf, /* data bytes to send */ + int len /* number of bytes to send */ ) +{ + if (addr == state->config->pll_address) { + struct i2c_msg msg = + { .addr = addr, .flags = 0, .buf = buf, .len = len }; + int err; + + if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { + printk(KERN_WARNING "lgdt3302: %s error (addr %02x <- %02x, err == %i)\n", __FUNCTION__, addr, buf[0], err); + return -EREMOTEIO; + } + } else { + u8 tmp[] = { buf[0], buf[1] }; + struct i2c_msg msg = + { .addr = addr, .flags = 0, .buf = tmp, .len = 2 }; + int err; + int i; + + for (i=1; ii2c, &msg, 1)) != 1) { + printk(KERN_WARNING "lgdt3302: %s error (addr %02x <- %02x, err == %i)\n", __FUNCTION__, addr, buf[0], err); + return -EREMOTEIO; + } + tmp[0]++; + } + } + return 0; +} +static int i2c_readbytes (struct lgdt3302_state* state, + u8 addr, /* demod_address or pll_address */ + u8 *buf, /* holds data bytes read */ + int len /* number of bytes to read */ ) +{ + struct i2c_msg msg = + { .addr = addr, .flags = I2C_M_RD, .buf = buf, .len = len }; + int err; + + if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { + printk(KERN_WARNING "lgdt3302: %s error (addr %02x, err == %i)\n", __FUNCTION__, addr, err); + return -EREMOTEIO; + } + return 0; +} + +/* + * This routine writes the register (reg) to the demod bus + * then reads the data returned for (len) bytes. + */ + +static u8 i2c_selectreadbytes (struct lgdt3302_state* state, + enum I2C_REG reg, u8* buf, int len) +{ + u8 wr [] = { reg }; + struct i2c_msg msg [] = { + { .addr = state->config->demod_address, + .flags = 0, .buf = wr, .len = 1 }, + { .addr = state->config->demod_address, + .flags = I2C_M_RD, .buf = buf, .len = len }, + }; + int ret; + ret = i2c_transfer(state->i2c, msg, 2); + if (ret != 2) { + printk(KERN_WARNING "lgdt3302: %s: addr 0x%02x select 0x%02x error (ret == %i)\n", __FUNCTION__, state->config->demod_address, reg, ret); + } else { + ret = 0; + } + return ret; +} + +/* Software reset */ +int lgdt3302_SwReset(struct lgdt3302_state* state) +{ + u8 ret; + u8 reset[] = { + IRQ_MASK, + 0x00 /* bit 6 is active low software reset + * bits 5-0 are 1 to mask interrupts */ + }; + + ret = i2c_writebytes(state, + state->config->demod_address, + reset, sizeof(reset)); + if (ret == 0) { + /* spec says reset takes 100 ns why wait */ + /* mdelay(100); */ /* keep low for 100mS */ + reset[1] = 0x7f; /* force reset high (inactive) + * and unmask interrupts */ + ret = i2c_writebytes(state, + state->config->demod_address, + reset, sizeof(reset)); + } + /* Spec does not indicate a need for this either */ + /*mdelay(5); */ /* wait 5 msec before doing more */ + return ret; +} + +static int lgdt3302_init(struct dvb_frontend* fe) +{ + /* Hardware reset is done using gpio[0] of cx23880x chip. + * I'd like to do it here, but don't know how to find chip address. + * cx88-cards.c arranges for the reset bit to be inactive (high). + * Maybe there needs to be a callable function in cx88-core or + * the caller of this function needs to do it. */ + + dprintk("%s entered\n", __FUNCTION__); + return lgdt3302_SwReset((struct lgdt3302_state*) fe->demodulator_priv); +} + +static int lgdt3302_read_ber(struct dvb_frontend* fe, u32* ber) +{ + *ber = 0; /* Dummy out for now */ + return 0; +} + +static int lgdt3302_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +{ + struct lgdt3302_state* state = (struct lgdt3302_state*) fe->demodulator_priv; + u8 buf[2]; + + i2c_selectreadbytes(state, PACKET_ERR_COUNTER1, buf, sizeof(buf)); + + *ucblocks = (buf[0] << 8) | buf[1]; + return 0; +} + +static int lgdt3302_set_parameters(struct dvb_frontend* fe, + struct dvb_frontend_parameters *param) +{ + u8 buf[4]; + struct lgdt3302_state* state = + (struct lgdt3302_state*) fe->demodulator_priv; + +#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,10) + + /* Use 50MHz parameter values from spec sheet since xtal is 50 */ + static u8 top_ctrl_cfg[] = { TOP_CONTROL, 0x03 }; + static u8 vsb_freq_cfg[] = { VSB_CARRIER_FREQ0, 0x00, 0x87, 0x8e, 0x01 }; + static u8 demux_ctrl_cfg[] = { DEMUX_CONTROL, 0xfb }; + static u8 agc_rf_cfg[] = { AGC_RF_BANDWIDTH0, 0x40, 0x93, 0x00 }; + static u8 agc_ctrl_cfg[] = { AGC_FUNC_CTRL2, 0xc6, 0x40 }; + static u8 agc_delay_cfg[] = { AGC_DELAY0, 0x00, 0x00, 0x00 }; + static u8 agc_loop_cfg[] = { AGC_LOOP_BANDWIDTH0, 0x08, 0x9a }; + + /* Change only if we are actually changing the modulation */ + if (state->current_modulation != param->u.vsb.modulation) { + switch(param->u.vsb.modulation) { + case VSB_8: + dprintk("%s: VSB_8 MODE\n", __FUNCTION__); + + /* Select VSB mode and serial MPEG interface */ + top_ctrl_cfg[1] = 0x07; + break; + + case QAM_64: + dprintk("%s: QAM_64 MODE\n", __FUNCTION__); + + /* Select QAM_64 mode and serial MPEG interface */ + top_ctrl_cfg[1] = 0x04; + break; + + case QAM_256: + dprintk("%s: QAM_256 MODE\n", __FUNCTION__); + + /* Select QAM_256 mode and serial MPEG interface */ + top_ctrl_cfg[1] = 0x05; + break; + default: + printk(KERN_WARNING "lgdt3302: %s: Modulation type(%d) UNSUPPORTED\n", __FUNCTION__, param->u.vsb.modulation); + return -1; + } + /* Initializations common to all modes */ + + /* Select the requested mode */ + i2c_writebytes(state, state->config->demod_address, + top_ctrl_cfg, sizeof(top_ctrl_cfg)); + + /* Change the value of IFBW[11:0] + of AGC IF/RF loop filter bandwidth register */ + i2c_writebytes(state, state->config->demod_address, + agc_rf_cfg, sizeof(agc_rf_cfg)); + + /* Change the value of bit 6, 'nINAGCBY' and + 'NSSEL[1:0] of ACG function control register 2 */ + /* Change the value of bit 6 'RFFIX' + of AGC function control register 3 */ + i2c_writebytes(state, state->config->demod_address, + agc_ctrl_cfg, sizeof(agc_ctrl_cfg)); + + /* Change the TPCLK pin polarity + data is valid on falling clock */ + i2c_writebytes(state, state->config->demod_address, + demux_ctrl_cfg, sizeof(demux_ctrl_cfg)); + + if (param->u.vsb.modulation == VSB_8) { + /* Initialization for VSB modes only */ + /* Change the value of NCOCTFV[25:0]of carrier + recovery center frequency register for VSB */ + i2c_writebytes(state, state->config->demod_address, + vsb_freq_cfg, sizeof(vsb_freq_cfg)); + } else { + /* Initialization for QAM modes only */ + /* Set the value of 'INLVTHD' register 0x2a/0x2c + to value from 'IFACC' register 0x39/0x3b -1 */ + int value; + i2c_selectreadbytes(state, AGC_RFIF_ACC0, + &agc_delay_cfg[1], 3); + value = ((agc_delay_cfg[1] & 0x0f) << 8) | agc_delay_cfg[3]; + value = value -1; + dprintk("%s IFACC -1 = 0x%03x\n", __FUNCTION__, value); + agc_delay_cfg[1] = (value >> 8) & 0x0f; + agc_delay_cfg[2] = 0x00; + agc_delay_cfg[3] = value & 0xff; + i2c_writebytes(state, state->config->demod_address, + agc_delay_cfg, sizeof(agc_delay_cfg)); + + /* Change the value of IAGCBW[15:8] + of inner AGC loop filter bandwith */ + i2c_writebytes(state, state->config->demod_address, + agc_loop_cfg, sizeof(agc_loop_cfg)); + } + + state->config->set_ts_params(fe, 0); + lgdt3302_SwReset(state); + state->current_modulation = param->u.vsb.modulation; + } +#else + printk("lgdt3302: %s: you need a newer kernel for this, sorry\n",__FUNCTION__); +#endif + + /* Change only if we are actually changing the channel */ + if (state->current_frequency != param->frequency) { + dvb_pll_configure(state->config->pll_desc, buf, + param->frequency, 0); + dprintk("%s: tuner bytes: 0x%02x 0x%02x " + "0x%02x 0x%02x\n", __FUNCTION__, buf[0],buf[1],buf[2],buf[3]); + i2c_writebytes(state, state->config->pll_address ,buf, 4); + + /* Check the status of the tuner pll */ + i2c_readbytes(state, state->config->pll_address, buf, 1); + dprintk("%s: tuner status byte = 0x%02x\n", __FUNCTION__, buf[0]); + + lgdt3302_SwReset(state); + + /* Update current frequency */ + state->current_frequency = param->frequency; + } + return 0; +} + +static int lgdt3302_get_frontend(struct dvb_frontend* fe, + struct dvb_frontend_parameters* param) +{ + struct lgdt3302_state *state = fe->demodulator_priv; + param->frequency = state->current_frequency; + return 0; +} + +static int lgdt3302_read_status(struct dvb_frontend* fe, fe_status_t* status) +{ + struct lgdt3302_state* state = (struct lgdt3302_state*) fe->demodulator_priv; + u8 buf[3]; + + *status = 0; /* Reset status result */ + + /* Check the status of the tuner pll */ + i2c_readbytes(state, state->config->pll_address, buf, 1); + dprintk("%s: tuner status byte = 0x%02x\n", __FUNCTION__, buf[0]); + if ((buf[0] & 0xc0) != 0x40) + return 0; /* Tuner PLL not locked or not powered on */ + + /* + * You must set the Mask bits to 1 in the IRQ_MASK in order + * to see that status bit in the IRQ_STATUS register. + * This is done in SwReset(); + */ + + /* signal status */ + i2c_selectreadbytes(state, TOP_CONTROL, buf, sizeof(buf)); + dprintk("%s: TOP_CONTROL = 0x%02x, IRO_MASK = 0x%02x, IRQ_STATUS = 0x%02x\n", __FUNCTION__, buf[0], buf[1], buf[2]); + if ((buf[2] & 0x30) == 0x10) + *status |= FE_HAS_SIGNAL; + + /* sync status */ + if ((buf[2] & 0x03) == 0x01) { + *status |= FE_HAS_SYNC; + } + + /* FEC error status */ + if ((buf[2] & 0x0c) == 0x08) { + *status |= FE_HAS_LOCK; + *status |= FE_HAS_VITERBI; + } + +#if 0 + /* Alternative method to check for a signal */ + /* AGC status register */ + i2c_selectreadbytes(state, AGC_STATUS, buf, 1); + dprintk("%s: AGC_STATUS = 0x%02x\n", __FUNCTION__, buf[0]); + if ((buf[0] & 0x0c) == 0x80) /* Test signal does not exist flag */ + /* Test AGC lock flag */ + *status |= FE_HAS_SIGNAL; + else + return 0; + + /* Carrier Recovery Lock Status Register */ + i2c_selectreadbytes(state, CARRIER_LOCK, buf, 1); + dprintk("%s: CARRIER_LOCK = 0x%02x\n", __FUNCTION__, buf[0]); + switch (state->current_modulation) { + case QAM_256: + case QAM_64: + /* Need to undestand why there are 3 lock levels here */ + if ((buf[0] & 0x07) == 0x07) + *status |= FE_HAS_CARRIER; + else + return 0; + break; +#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,10) + case VSB_8: + if ((buf[0] & 0x80) == 0x80) + *status |= FE_HAS_CARRIER; + else + return 0; + break; +#endif + default: + printk("KERN_WARNING lgdt3302: %s: Modulation set to unsupported value\n", __FUNCTION__); + } +#endif + + return 0; +} + +static int lgdt3302_read_signal_strength(struct dvb_frontend* fe, u16* strength) +{ + /* not directly available. */ + return 0; +} + +static int lgdt3302_read_snr(struct dvb_frontend* fe, u16* snr) +{ +#ifdef SNR_IN_DB + /* + * Spec sheet shows formula for SNR_EQ = 10 log10(25 * 24**2 / noise) + * and SNR_PH = 10 log10(25 * 32**2 / noise) for equalizer and phase tracker + * respectively. The following tables are built on these formulas. + * The usual definition is SNR = 20 log10(signal/noise) + * If the specification is wrong the value retuned is 1/2 the actual SNR in db. + * + * This table is a an ordered list of noise values computed by the + * formula from the spec sheet such that the index into the table + * starting at 43 or 45 is the SNR value in db. There are duplicate noise + * value entries at the beginning because the SNR varies more than + * 1 db for a change of 1 digit in noise at very small values of noise. + * + * Examples from SNR_EQ table: + * noise SNR + * 0 43 + * 1 42 + * 2 39 + * 3 37 + * 4 36 + * 5 35 + * 6 34 + * 7 33 + * 8 33 + * 9 32 + * 10 32 + * 11 31 + * 12 31 + * 13 30 + */ + + static const u32 SNR_EQ[] = + { 1, 2, 2, 2, 3, 3, 4, 4, 5, 7, + 9, 11, 13, 17, 21, 26, 33, 41, 52, 65, + 81, 102, 129, 162, 204, 257, 323, 406, 511, 644, + 810, 1020, 1284, 1616, 2035, 2561, 3224, 4059, 5110, 6433, + 8098, 10195, 12835, 16158, 20341, 25608, 32238, 40585, 51094, 64323, + 80978, 101945, 128341, 161571, 203406, 256073, 0x40000 + }; + + static const u32 SNR_PH[] = + { 1, 2, 2, 2, 3, 3, 4, 5, 6, 8, + 10, 12, 15, 19, 23, 29, 37, 46, 58, 73, + 91, 115, 144, 182, 229, 288, 362, 456, 574, 722, + 909, 1144, 1440, 1813, 2282, 2873, 3617, 4553, 5732, 7216, + 9084, 11436, 14396, 18124, 22817, 28724, 36161, 45524, 57312, 72151, + 90833, 114351, 143960, 181235, 228161, 0x040000 + }; + + static u8 buf[5];/* read data buffer */ + static u32 noise; /* noise value */ + static u32 snr_db; /* index into SNR_EQ[] */ + struct lgdt3302_state* state = (struct lgdt3302_state*) fe->demodulator_priv; + + /* read both equalizer and pase tracker noise data */ + i2c_selectreadbytes(state, EQPH_ERR0, buf, sizeof(buf)); + + if (state->current_modulation == VSB_8) { + /* Equalizer Mean-Square Error Register for VSB */ + noise = ((buf[0] & 7) << 16) | (buf[1] << 8) | buf[2]; + + /* + * Look up noise value in table. + * A better search algorithm could be used... + * watch out there are duplicate entries. + */ + for (snr_db = 0; snr_db < sizeof(SNR_EQ); snr_db++) { + if (noise < SNR_EQ[snr_db]) { + *snr = 43 - snr_db; + break; + } + } + } else { + /* Phase Tracker Mean-Square Error Register for QAM */ + noise = ((buf[0] & 7<<3) << 13) | (buf[3] << 8) | buf[4]; + + /* Look up noise value in table. */ + for (snr_db = 0; snr_db < sizeof(SNR_PH); snr_db++) { + if (noise < SNR_PH[snr_db]) { + *snr = 45 - snr_db; + break; + } + } + } +#else + /* Return the raw noise value */ + static u8 buf[5];/* read data buffer */ + static u32 noise; /* noise value */ + struct lgdt3302_state* state = (struct lgdt3302_state*) fe->demodulator_priv; + + /* read both equalizer and pase tracker noise data */ + i2c_selectreadbytes(state, EQPH_ERR0, buf, sizeof(buf)); + + if (state->current_modulation == VSB_8) { + /* Equalizer Mean-Square Error Register for VSB */ + noise = ((buf[0] & 7) << 16) | (buf[1] << 8) | buf[2]; + } else { + /* Phase Tracker Mean-Square Error Register for QAM */ + noise = ((buf[0] & 7<<3) << 13) | (buf[3] << 8) | buf[4]; + } + + /* Small values for noise mean signal is better so invert noise */ + /* Noise is 19 bit value so discard 3 LSB*/ + *snr = ~noise>>3; +#endif + + dprintk("%s: noise = 0x%05x, snr = %idb\n",__FUNCTION__, noise, *snr); + + return 0; +} + +static int lgdt3302_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fe_tune_settings) +{ + /* I have no idea about this - it may not be needed */ + fe_tune_settings->min_delay_ms = 500; + fe_tune_settings->step_size = 0; + fe_tune_settings->max_drift = 0; + return 0; +} + +static void lgdt3302_release(struct dvb_frontend* fe) +{ + struct lgdt3302_state* state = (struct lgdt3302_state*) fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops lgdt3302_ops; + +struct dvb_frontend* lgdt3302_attach(const struct lgdt3302_config* config, + struct i2c_adapter* i2c) +{ + struct lgdt3302_state* state = NULL; + u8 buf[1]; + + /* Allocate memory for the internal state */ + state = (struct lgdt3302_state*) kmalloc(sizeof(struct lgdt3302_state), GFP_KERNEL); + if (state == NULL) + goto error; + memset(state,0,sizeof(*state)); + + /* Setup the state */ + state->config = config; + state->i2c = i2c; + memcpy(&state->ops, &lgdt3302_ops, sizeof(struct dvb_frontend_ops)); + /* Verify communication with demod chip */ + if (i2c_selectreadbytes(state, 2, buf, 1)) + goto error; + + state->current_frequency = -1; + state->current_modulation = -1; + + /* Create dvb_frontend */ + state->frontend.ops = &state->ops; + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + if (state) + kfree(state); + dprintk("%s: ERROR\n",__FUNCTION__); + return NULL; +} + +static struct dvb_frontend_ops lgdt3302_ops = { + .info = { + .name= "LG Electronics LGDT3302 VSB/QAM Frontend", + .type = FE_ATSC, + .frequency_min= 54000000, + .frequency_max= 858000000, + .frequency_stepsize= 62500, + /* Symbol rate is for all VSB modes need to check QAM */ + .symbol_rate_min = 10762000, + .symbol_rate_max = 10762000, + .caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB + }, + .init = lgdt3302_init, + .set_frontend = lgdt3302_set_parameters, + .get_frontend = lgdt3302_get_frontend, + .get_tune_settings = lgdt3302_get_tune_settings, + .read_status = lgdt3302_read_status, + .read_ber = lgdt3302_read_ber, + .read_signal_strength = lgdt3302_read_signal_strength, + .read_snr = lgdt3302_read_snr, + .read_ucblocks = lgdt3302_read_ucblocks, + .release = lgdt3302_release, +}; + +MODULE_DESCRIPTION("LGDT3302 [DViCO FusionHDTV 3 Gold] (ATSC 8VSB & ITU-T J.83 AnnexB 64/256 QAM) Demodulator Driver"); +MODULE_AUTHOR("Wilson Michaels"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(lgdt3302_attach); + +/* + * Local variables: + * c-basic-offset: 8 + * compile-command: "make DVB=1" + * End: + */ diff --git a/drivers/media/dvb/frontends/lgdt3302.h b/drivers/media/dvb/frontends/lgdt3302.h new file mode 100644 index 000000000000..81587a40032b --- /dev/null +++ b/drivers/media/dvb/frontends/lgdt3302.h @@ -0,0 +1,49 @@ +/* + * $Id: lgdt3302.h,v 1.2 2005/06/28 23:50:48 mkrufky Exp $ + * + * Support for LGDT3302 (DViCO FustionHDTV 3 Gold) - VSB/QAM + * + * Copyright (C) 2005 Wilson Michaels + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef LGDT3302_H +#define LGDT3302_H + +#include + +struct lgdt3302_config +{ + /* The demodulator's i2c address */ + u8 demod_address; + u8 pll_address; + struct dvb_pll_desc *pll_desc; + + /* Need to set device param for start_dma */ + int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured); +}; + +extern struct dvb_frontend* lgdt3302_attach(const struct lgdt3302_config* config, + struct i2c_adapter* i2c); + +#endif /* LGDT3302_H */ + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/dvb/frontends/lgdt3302_priv.h b/drivers/media/dvb/frontends/lgdt3302_priv.h new file mode 100644 index 000000000000..6193fa7a569d --- /dev/null +++ b/drivers/media/dvb/frontends/lgdt3302_priv.h @@ -0,0 +1,72 @@ +/* + * $Id: lgdt3302_priv.h,v 1.2 2005/06/28 23:50:48 mkrufky Exp $ + * + * Support for LGDT3302 (DViCO FustionHDTV 3 Gold) - VSB/QAM + * + * Copyright (C) 2005 Wilson Michaels + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef _LGDT3302_PRIV_ +#define _LGDT3302_PRIV_ + +/* i2c control register addresses */ +enum I2C_REG { + TOP_CONTROL= 0x00, + IRQ_MASK= 0x01, + IRQ_STATUS= 0x02, + VSB_CARRIER_FREQ0= 0x16, + VSB_CARRIER_FREQ1= 0x17, + VSB_CARRIER_FREQ2= 0x18, + VSB_CARRIER_FREQ3= 0x19, + CARRIER_MSEQAM1= 0x1a, + CARRIER_MSEQAM2= 0x1b, + CARRIER_LOCK= 0x1c, + TIMING_RECOVERY= 0x1d, + AGC_DELAY0= 0x2a, + AGC_DELAY1= 0x2b, + AGC_DELAY2= 0x2c, + AGC_RF_BANDWIDTH0= 0x2d, + AGC_RF_BANDWIDTH1= 0x2e, + AGC_RF_BANDWIDTH2= 0x2f, + AGC_LOOP_BANDWIDTH0= 0x30, + AGC_LOOP_BANDWIDTH1= 0x31, + AGC_FUNC_CTRL1= 0x32, + AGC_FUNC_CTRL2= 0x33, + AGC_FUNC_CTRL3= 0x34, + AGC_RFIF_ACC0= 0x39, + AGC_RFIF_ACC1= 0x3a, + AGC_RFIF_ACC2= 0x3b, + AGC_STATUS= 0x3f, + SYNC_STATUS_VSB= 0x43, + EQPH_ERR0= 0x47, + EQ_ERR1= 0x48, + EQ_ERR2= 0x49, + PH_ERR1= 0x4a, + PH_ERR2= 0x4b, + DEMUX_CONTROL= 0x66, + PACKET_ERR_COUNTER1= 0x6a, + PACKET_ERR_COUNTER2= 0x6b, +}; + +#endif /* _LGDT3302_PRIV_ */ + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */