From: Christian Marangi Date: Tue, 18 Oct 2022 20:38:05 +0000 (+0200) Subject: generic: 5.15: add missing tag for some backports patches X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d80c91b23ee252be1e34eae450b0115c83195cd7;p=openwrt%2Fstaging%2Fstintel.git generic: 5.15: add missing tag for some backports patches Add for mtd-parsers-trx-allow-to-use-on-MediaTek-MIPS-SoCs.patch and hwmon-lm70-Add-ti-tmp125-support.patch the 5.18 tag as it was merged in kernel 5.18. Signed-off-by: Christian Marangi --- diff --git a/target/linux/generic/backport-5.15/410-mtd-next-mtd-parsers-trx-allow-to-use-on-MediaTek-MIPS-SoCs.patch b/target/linux/generic/backport-5.15/410-mtd-next-mtd-parsers-trx-allow-to-use-on-MediaTek-MIPS-SoCs.patch deleted file mode 100644 index 5c49841760..0000000000 --- a/target/linux/generic/backport-5.15/410-mtd-next-mtd-parsers-trx-allow-to-use-on-MediaTek-MIPS-SoCs.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 2365f91c861cbfeef7141c69842848c7b2d3c2db Mon Sep 17 00:00:00 2001 -From: INAGAKI Hiroshi -Date: Sun, 13 Feb 2022 15:40:44 +0900 -Subject: [PATCH] mtd: parsers: trx: allow to use on MediaTek MIPS SoCs - -Buffalo sells some router devices which have trx-formatted firmware, -based on MediaTek MIPS SoCs. To use parser_trx on those devices, add -"RALINK" to dependency and allow to compile for MediaTek MIPS SoCs. - -examples: - -- WCR-1166DS (MT7628) -- WSR-1166DHP (MT7621) -- WSR-2533DHP (MT7621) - -Signed-off-by: INAGAKI Hiroshi -Signed-off-by: Miquel Raynal -Link: https://lore.kernel.org/linux-mtd/20220213064045.1781-1-musashino.open@gmail.com ---- - drivers/mtd/parsers/Kconfig | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/mtd/parsers/Kconfig -+++ b/drivers/mtd/parsers/Kconfig -@@ -115,7 +115,7 @@ config MTD_AFS_PARTS - - config MTD_PARSER_TRX - tristate "Parser for TRX format partitions" -- depends on MTD && (BCM47XX || ARCH_BCM_5301X || ARCH_MEDIATEK || COMPILE_TEST) -+ depends on MTD && (BCM47XX || ARCH_BCM_5301X || ARCH_MEDIATEK || RALINK || COMPILE_TEST) - help - TRX is a firmware format used by Broadcom on their devices. It - may contain up to 3/4 partitions (depending on the version). diff --git a/target/linux/generic/backport-5.15/410-v5.18-mtd-parsers-trx-allow-to-use-on-MediaTek-MIPS-SoCs.patch b/target/linux/generic/backport-5.15/410-v5.18-mtd-parsers-trx-allow-to-use-on-MediaTek-MIPS-SoCs.patch new file mode 100644 index 0000000000..5c49841760 --- /dev/null +++ b/target/linux/generic/backport-5.15/410-v5.18-mtd-parsers-trx-allow-to-use-on-MediaTek-MIPS-SoCs.patch @@ -0,0 +1,33 @@ +From 2365f91c861cbfeef7141c69842848c7b2d3c2db Mon Sep 17 00:00:00 2001 +From: INAGAKI Hiroshi +Date: Sun, 13 Feb 2022 15:40:44 +0900 +Subject: [PATCH] mtd: parsers: trx: allow to use on MediaTek MIPS SoCs + +Buffalo sells some router devices which have trx-formatted firmware, +based on MediaTek MIPS SoCs. To use parser_trx on those devices, add +"RALINK" to dependency and allow to compile for MediaTek MIPS SoCs. + +examples: + +- WCR-1166DS (MT7628) +- WSR-1166DHP (MT7621) +- WSR-2533DHP (MT7621) + +Signed-off-by: INAGAKI Hiroshi +Signed-off-by: Miquel Raynal +Link: https://lore.kernel.org/linux-mtd/20220213064045.1781-1-musashino.open@gmail.com +--- + drivers/mtd/parsers/Kconfig | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/mtd/parsers/Kconfig ++++ b/drivers/mtd/parsers/Kconfig +@@ -115,7 +115,7 @@ config MTD_AFS_PARTS + + config MTD_PARSER_TRX + tristate "Parser for TRX format partitions" +- depends on MTD && (BCM47XX || ARCH_BCM_5301X || ARCH_MEDIATEK || COMPILE_TEST) ++ depends on MTD && (BCM47XX || ARCH_BCM_5301X || ARCH_MEDIATEK || RALINK || COMPILE_TEST) + help + TRX is a firmware format used by Broadcom on their devices. It + may contain up to 3/4 partitions (depending on the version). diff --git a/target/linux/generic/backport-5.15/870-hwmon-next-hwmon-lm70-Add-ti-tmp125-support.patch b/target/linux/generic/backport-5.15/870-hwmon-next-hwmon-lm70-Add-ti-tmp125-support.patch deleted file mode 100644 index fabf177628..0000000000 --- a/target/linux/generic/backport-5.15/870-hwmon-next-hwmon-lm70-Add-ti-tmp125-support.patch +++ /dev/null @@ -1,71 +0,0 @@ -From 31d8f414e1596ba54a4315418e4c0086fda9e428 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Fri, 18 Feb 2022 10:06:43 +0100 -Subject: hwmon: (lm70) Add ti,tmp125 support - -The TMP125 is a 2 degree Celsius accurate Digital -Temperature Sensor with a SPI interface. - -The temperature register is a 16-bit, read-only register. -The MSB (Bit 15) is a leading zero and never set. Bits 14 -to 5 are the 1+9 temperature data bits in a two's -complement format. Bits 4 to 0 are useless copies of -Bit 5 value and therefore ignored. - -Signed-off-by: Christian Lamparter -Link: https://lore.kernel.org/r/43b19cbd4e7f51e9509e561b02b5d8d0e7079fac.1645175187.git.chunkeey@gmail.com -Signed-off-by: Guenter Roeck ---- ---- a/drivers/hwmon/lm70.c -+++ b/drivers/hwmon/lm70.c -@@ -34,6 +34,7 @@ - #define LM70_CHIP_LM71 2 /* NS LM71 */ - #define LM70_CHIP_LM74 3 /* NS LM74 */ - #define LM70_CHIP_TMP122 4 /* TI TMP122/TMP124 */ -+#define LM70_CHIP_TMP125 5 /* TI TMP125 */ - - struct lm70 { - struct spi_device *spi; -@@ -87,6 +88,12 @@ static ssize_t temp1_input_show(struct d - * LM71: - * 14 bits of 2's complement data, discard LSB 2 bits, - * resolution 0.0312 degrees celsius. -+ * -+ * TMP125: -+ * MSB/D15 is a leading zero. D14 is the sign-bit. This is -+ * followed by 9 temperature bits (D13..D5) in 2's complement -+ * data format with a resolution of 0.25 degrees celsius per unit. -+ * LSB 5 bits (D4..D0) share the same value as D5 and get discarded. - */ - switch (p_lm70->chip) { - case LM70_CHIP_LM70: -@@ -102,6 +109,10 @@ static ssize_t temp1_input_show(struct d - case LM70_CHIP_LM71: - val = ((int)raw / 4) * 3125 / 100; - break; -+ -+ case LM70_CHIP_TMP125: -+ val = (sign_extend32(raw, 14) / 32) * 250; -+ break; - } - - status = sprintf(buf, "%d\n", val); /* millidegrees Celsius */ -@@ -136,6 +147,10 @@ static const struct of_device_id lm70_of - .data = (void *) LM70_CHIP_TMP122, - }, - { -+ .compatible = "ti,tmp125", -+ .data = (void *) LM70_CHIP_TMP125, -+ }, -+ { - .compatible = "ti,lm71", - .data = (void *) LM70_CHIP_LM71, - }, -@@ -184,6 +199,7 @@ static const struct spi_device_id lm70_i - { "lm70", LM70_CHIP_LM70 }, - { "tmp121", LM70_CHIP_TMP121 }, - { "tmp122", LM70_CHIP_TMP122 }, -+ { "tmp125", LM70_CHIP_TMP125 }, - { "lm71", LM70_CHIP_LM71 }, - { "lm74", LM70_CHIP_LM74 }, - { }, diff --git a/target/linux/generic/backport-5.15/870-v5.18-hwmon-lm70-Add-ti-tmp125-support.patch b/target/linux/generic/backport-5.15/870-v5.18-hwmon-lm70-Add-ti-tmp125-support.patch new file mode 100644 index 0000000000..fabf177628 --- /dev/null +++ b/target/linux/generic/backport-5.15/870-v5.18-hwmon-lm70-Add-ti-tmp125-support.patch @@ -0,0 +1,71 @@ +From 31d8f414e1596ba54a4315418e4c0086fda9e428 Mon Sep 17 00:00:00 2001 +From: Christian Lamparter +Date: Fri, 18 Feb 2022 10:06:43 +0100 +Subject: hwmon: (lm70) Add ti,tmp125 support + +The TMP125 is a 2 degree Celsius accurate Digital +Temperature Sensor with a SPI interface. + +The temperature register is a 16-bit, read-only register. +The MSB (Bit 15) is a leading zero and never set. Bits 14 +to 5 are the 1+9 temperature data bits in a two's +complement format. Bits 4 to 0 are useless copies of +Bit 5 value and therefore ignored. + +Signed-off-by: Christian Lamparter +Link: https://lore.kernel.org/r/43b19cbd4e7f51e9509e561b02b5d8d0e7079fac.1645175187.git.chunkeey@gmail.com +Signed-off-by: Guenter Roeck +--- +--- a/drivers/hwmon/lm70.c ++++ b/drivers/hwmon/lm70.c +@@ -34,6 +34,7 @@ + #define LM70_CHIP_LM71 2 /* NS LM71 */ + #define LM70_CHIP_LM74 3 /* NS LM74 */ + #define LM70_CHIP_TMP122 4 /* TI TMP122/TMP124 */ ++#define LM70_CHIP_TMP125 5 /* TI TMP125 */ + + struct lm70 { + struct spi_device *spi; +@@ -87,6 +88,12 @@ static ssize_t temp1_input_show(struct d + * LM71: + * 14 bits of 2's complement data, discard LSB 2 bits, + * resolution 0.0312 degrees celsius. ++ * ++ * TMP125: ++ * MSB/D15 is a leading zero. D14 is the sign-bit. This is ++ * followed by 9 temperature bits (D13..D5) in 2's complement ++ * data format with a resolution of 0.25 degrees celsius per unit. ++ * LSB 5 bits (D4..D0) share the same value as D5 and get discarded. + */ + switch (p_lm70->chip) { + case LM70_CHIP_LM70: +@@ -102,6 +109,10 @@ static ssize_t temp1_input_show(struct d + case LM70_CHIP_LM71: + val = ((int)raw / 4) * 3125 / 100; + break; ++ ++ case LM70_CHIP_TMP125: ++ val = (sign_extend32(raw, 14) / 32) * 250; ++ break; + } + + status = sprintf(buf, "%d\n", val); /* millidegrees Celsius */ +@@ -136,6 +147,10 @@ static const struct of_device_id lm70_of + .data = (void *) LM70_CHIP_TMP122, + }, + { ++ .compatible = "ti,tmp125", ++ .data = (void *) LM70_CHIP_TMP125, ++ }, ++ { + .compatible = "ti,lm71", + .data = (void *) LM70_CHIP_LM71, + }, +@@ -184,6 +199,7 @@ static const struct spi_device_id lm70_i + { "lm70", LM70_CHIP_LM70 }, + { "tmp121", LM70_CHIP_TMP121 }, + { "tmp122", LM70_CHIP_TMP122 }, ++ { "tmp125", LM70_CHIP_TMP125 }, + { "lm71", LM70_CHIP_LM71 }, + { "lm74", LM70_CHIP_LM74 }, + { },