From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date: Sat, 26 Nov 2016 00:01:11 +0000 (+0100)
Subject: lantiq: specify the PCIe controller's interrupt, size and address cells
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d76ee5bfac68687cb01b70f2d3d400d653ecd9c8;p=openwrt%2Fstaging%2Fluka.git

lantiq: specify the PCIe controller's interrupt, size and address cells

This allows adding devices to the PCIe controller in the .dts files.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---

diff --git a/target/linux/lantiq/dts/vr9.dtsi b/target/linux/lantiq/dts/vr9.dtsi
index 779e23e61f..7f036186e4 100644
--- a/target/linux/lantiq/dts/vr9.dtsi
+++ b/target/linux/lantiq/dts/vr9.dtsi
@@ -210,10 +210,18 @@
 			interrupts = <96>;
 		};
 
-		pcie@d900000 {
+		pcie0: pcie@d900000 {
+			compatible = "lantiq,pcie-xrx200";
+
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+
 			interrupt-parent = <&icu0>;
 			interrupts = <161 144>;
-			compatible = "lantiq,pcie-xrx200";
+
+			device_type = "pci";
+
 			gpio-reset = <&gpio 38 GPIO_ACTIVE_HIGH>;
 		};