From: Lokesh Vutla <lokeshvutla@ti.com>
Date: Mon, 12 May 2014 08:19:33 +0000 (+0530)
Subject: ARM: OMAP: Fix omap_sdram_size calculation
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d7630da6f401a68644f8c5fa1ee3b39bcf60972f;p=project%2Fbcm63xx%2Fu-boot.git

ARM: OMAP: Fix omap_sdram_size calculation

Last section of DMM is used for trapping tiler unmapped sections.
Corresponding trap_size should be deducted from total SDRAM size
only if trap section is overlapping with available SDRAM
based on DMM sections. Fixing the same.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---

diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
index 132454c7b4..ba97d9ec56 100644
--- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c
+++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
@@ -185,7 +185,7 @@ u32 omap_sdram_size(void)
 {
 	u32 section, i, valid;
 	u64 sdram_start = 0, sdram_end = 0, addr,
-	    size, total_size = 0, trap_size = 0;
+	    size, total_size = 0, trap_size = 0, trap_start = 0;
 
 	for (i = 0; i < 4; i++) {
 		section	= __raw_readl(DMM_BASE + i*4);
@@ -208,12 +208,15 @@ u32 omap_sdram_size(void)
 					sdram_end = addr + size;
 			} else {
 				trap_size = size;
+				trap_start = addr;
 			}
-
 		}
-
 	}
-	total_size = (sdram_end - sdram_start) - (trap_size);
+
+	if ((trap_start >= sdram_start) && (trap_start < sdram_end))
+		total_size = (sdram_end - sdram_start) - (trap_size);
+	else
+		total_size = sdram_end - sdram_start;
 
 	return total_size;
 }