From: Daniel Mack Date: Wed, 26 Sep 2012 07:24:27 +0000 (+0000) Subject: net: ti cpsw ethernet: allow reading phy interface mode from DT X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d7559982701ac500662b2e8e150ff34f7faf0281;p=openwrt%2Fstaging%2Fblogic.git net: ti cpsw ethernet: allow reading phy interface mode from DT Allow users to specify the phy interface of the CPSW slaves. The new node parameter is called "phy_if_mode" and is optional. The original behaviour of the driver is preserved when not given. Signed-off-by: Daniel Mack Cc: Mugunthan V N Cc: Vaibhav Hiremath Cc: David S. Miller Signed-off-by: David S. Miller --- diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt index dcaabe9fe869..d87f7d2b7b0a 100644 --- a/Documentation/devicetree/bindings/net/cpsw.txt +++ b/Documentation/devicetree/bindings/net/cpsw.txt @@ -25,6 +25,8 @@ Required properties: - slave_reg_ofs : Specifies slave register offset - sliver_reg_ofs : Specifies slave sliver register offset - phy_id : Specifies slave phy id +- phy_if_mode : Specified slave phy interface mode (optional) + (one of the PHY_INTERFACE_MODE_* as numerical value) - mac-address : Specifies slave MAC address Optional properties: @@ -62,6 +64,7 @@ Examples: slave_reg_ofs = <0x208>; sliver_reg_ofs = <0xd80>; phy_id = "davinci_mdio.16:00"; + phy_if_mode = <6>; /* PHY_INTERFACE_MODE_RGMII */ /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; }; diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index df55e2403746..3e12db6f9c0c 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -855,6 +855,9 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data, } slave_data->sliver_reg_ofs = prop; + if (!of_property_read_u32(slave_node, "phy_if_mode", &prop)) + slave_data->phy_if = prop; + mac_addr = of_get_mac_address(slave_node); if (mac_addr) memcpy(slave_data->mac_addr, mac_addr, ETH_ALEN);