From: Simon Shields Date: Mon, 7 Jan 2019 19:09:26 +0000 (-0800) Subject: Input: tm2-touchkey - add support for midas touchkey X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d6f66f618569b8f6cc65435b1cab4be7f0610f32;p=openwrt%2Fstaging%2Fblogic.git Input: tm2-touchkey - add support for midas touchkey The touchkey on midas boards is almost identical. The only real difference is that it uses the same register for both keycode and base. Signed-off-by: Simon Shields Signed-off-by: Paweł Chmiel Reviewed-by: Rob Herring Signed-off-by: Dmitry Torokhov --- diff --git a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt index 635f62c756ee..3df82c4017ff 100644 --- a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt +++ b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt @@ -1,7 +1,9 @@ Samsung tm2-touchkey Required properties: -- compatible: must be "cypress,tm2-touchkey" +- compatible: + * "cypress,tm2-touchkey" - for the touchkey found on the tm2 board + * "cypress,midas-touchkey" - for the touchkey found on midas boards - reg: I2C address of the chip. - interrupt-parent: a phandle for the interrupt controller (see interrupt binding[0]). diff --git a/drivers/input/keyboard/tm2-touchkey.c b/drivers/input/keyboard/tm2-touchkey.c index abc266e40e17..5a1fe08bdd76 100644 --- a/drivers/input/keyboard/tm2-touchkey.c +++ b/drivers/input/keyboard/tm2-touchkey.c @@ -22,12 +22,12 @@ #include #include #include +#include #include #include #define TM2_TOUCHKEY_DEV_NAME "tm2-touchkey" -#define TM2_TOUCHKEY_KEYCODE_REG 0x03 -#define TM2_TOUCHKEY_BASE_REG 0x00 + #define TM2_TOUCHKEY_CMD_LED_ON 0x10 #define TM2_TOUCHKEY_CMD_LED_OFF 0x20 #define TM2_TOUCHKEY_BIT_PRESS_EV BIT(3) @@ -40,12 +40,28 @@ enum { TM2_TOUCHKEY_KEY_BACK, }; +struct touchkey_variant { + u8 keycode_reg; + u8 base_reg; +}; + struct tm2_touchkey_data { struct i2c_client *client; struct input_dev *input_dev; struct led_classdev led_dev; struct regulator *vdd; struct regulator_bulk_data regulators[2]; + const struct touchkey_variant *variant; +}; + +static const struct touchkey_variant tm2_touchkey_variant = { + .keycode_reg = 0x03, + .base_reg = 0x00, +}; + +static const struct touchkey_variant midas_touchkey_variant = { + .keycode_reg = 0x00, + .base_reg = 0x00, }; static void tm2_touchkey_led_brightness_set(struct led_classdev *led_dev, @@ -66,7 +82,7 @@ static void tm2_touchkey_led_brightness_set(struct led_classdev *led_dev, regulator_set_voltage(touchkey->vdd, volt, volt); i2c_smbus_write_byte_data(touchkey->client, - TM2_TOUCHKEY_BASE_REG, data); + touchkey->variant->base_reg, data); } static int tm2_touchkey_power_enable(struct tm2_touchkey_data *touchkey) @@ -99,7 +115,7 @@ static irqreturn_t tm2_touchkey_irq_handler(int irq, void *devid) int key; data = i2c_smbus_read_byte_data(touchkey->client, - TM2_TOUCHKEY_KEYCODE_REG); + touchkey->variant->keycode_reg); if (data < 0) { dev_err(&touchkey->client->dev, "failed to read i2c data: %d\n", data); @@ -153,6 +169,8 @@ static int tm2_touchkey_probe(struct i2c_client *client, touchkey->client = client; i2c_set_clientdata(client, touchkey); + touchkey->variant = of_device_get_match_data(&client->dev); + touchkey->regulators[0].supply = "vcc"; touchkey->regulators[1].supply = "vdd"; error = devm_regulator_bulk_get(&client->dev, @@ -262,7 +280,13 @@ static const struct i2c_device_id tm2_touchkey_id_table[] = { MODULE_DEVICE_TABLE(i2c, tm2_touchkey_id_table); static const struct of_device_id tm2_touchkey_of_match[] = { - { .compatible = "cypress,tm2-touchkey", }, + { + .compatible = "cypress,tm2-touchkey", + .data = &tm2_touchkey_variant, + }, { + .compatible = "cypress,midas-touchkey", + .data = &midas_touchkey_variant, + }, { }, }; MODULE_DEVICE_TABLE(of, tm2_touchkey_of_match);