From: Piotr Dymacz Date: Fri, 16 Feb 2018 19:30:38 +0000 (+0100) Subject: ar71xx: add support for YunCore T830 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d6f187f9389d67c2e9c8bf253c6566388a0522d3;p=openwrt%2Fstaging%2Fyousong.git ar71xx: add support for YunCore T830 YunCore T830 is a simple N300 router with 5-port FE switch, detachable antennas and USB 2.0 port. Specification: - 650/597/216 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 5x 10/100 Mbps Ethernet - 2T2R 2.4 GHz (QCA9531), with ext. PA (SKY65174-21) and LNA - two external, detachable antennas (RP-SMA) - 1x USB 2.0 - 8x LED (7 driven by GPIO) - 1x button (reset) - DC jack for main power input (12 V) - UART and JTAG headers on PCB Flash instruction: 1. First, gain root access to the device, following below steps: - Login into web gui (default password/IP: admin/192.168.188.253). - Go to "Advanced" -> "Management" -> "System" and download backup of configuration (bakfile.bin). - Open the file as tar.gz archive, edit/update "shadow" file and change hash of root password to something known. - Repack the archive, rename it back to "bakfile.bin" and use to restore configuration of the device. - After that, device will reboot and can be accessed over SSH. 2. Then, install OpenWrt: - Login over SSH and issue command: fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000" - Upload "sysupgrade" image and install it (only if previous command succeeded) with command: "sysupgrade -n -F openwrt-...". Signed-off-by: Piotr Dymacz --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 24c71f2a3c..fa47461f64 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -542,6 +542,7 @@ r36a) ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt" ;; r602n|\ +t830|\ zbt-we1526) ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1" ucidef_set_led_switch "lan1" "LAN1" "$board:green:lan1" "switch0" "0x10" @@ -549,6 +550,12 @@ zbt-we1526) ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04" ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02" ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" + + case "$board" in + t830) + ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1" + ;; + esac ;; r6100) ucidef_set_led_netdev "wan" "WAN (green)" "netgear:green:wan" "eth0" diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index f4e113a814..6beb8fbfdb 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -34,6 +34,7 @@ ar71xx_setup_interfaces() rb-750|\ rb-751|\ som9331|\ + t830|\ tew-632brp|\ tew-712br|\ tew-732br|\ diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index f7f622d92b..41b6f09304 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -388,6 +388,9 @@ get_status_led() { qihoo-c301) status_led="qihoo:green:status" ;; + t830) + status_led="$board:green:usb" + ;; tellstick-znet-lite) status_led="tellstick:white:system" ;; diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 034a3a435b..a041255c90 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -1064,6 +1064,9 @@ ar71xx_board_detect() { *"SR3200") name="sr3200" ;; + *"T830") + name="t830" + ;; *"TellStick ZNet Lite") name="tellstick-znet-lite" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 2904535372..d7b4c63848 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -276,6 +276,7 @@ platform_check_image() { sc300m|\ sc450|\ sr3200|\ + t830|\ tew-632brp|\ tew-712br|\ tew-732br|\ diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index e76dea4fb6..99e4419272 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -181,6 +181,7 @@ CONFIG_ATH79=y # CONFIG_ATH79_MACH_SMART_300 is not set # CONFIG_ATH79_MACH_SOM9331 is not set # CONFIG_ATH79_MACH_SR3200 is not set +# CONFIG_ATH79_MACH_T830 is not set # CONFIG_ATH79_MACH_TELLSTICK_ZNET_LITE is not set # CONFIG_ATH79_MACH_TEW_632BRP is not set # CONFIG_ATH79_MACH_TEW_673GRU is not set diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9 index 4b48ccb830..64603daada 100644 --- a/target/linux/ar71xx/config-4.9 +++ b/target/linux/ar71xx/config-4.9 @@ -179,6 +179,7 @@ CONFIG_ATH79=y # CONFIG_ATH79_MACH_SMART_300 is not set # CONFIG_ATH79_MACH_SOM9331 is not set # CONFIG_ATH79_MACH_SR3200 is not set +# CONFIG_ATH79_MACH_T830 is not set # CONFIG_ATH79_MACH_TELLSTICK_ZNET_LITE is not set # CONFIG_ATH79_MACH_TEW_632BRP is not set # CONFIG_ATH79_MACH_TEW_673GRU is not set diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index da3cf63cef..7c0494bcc8 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -1129,6 +1129,16 @@ config ATH79_MACH_SMART_300 select ATH79_DEV_M25P80 select ATH79_DEV_WMAC +config ATH79_MACH_T830 + bool "YunCore T830 support" + select SOC_QCA953X + select ARH79_DEV_ETH + select ARH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + config ATH79_MACH_TELLSTICK_ZNET_LITE bool "TellStick ZNet Lite" select SOC_AR933X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index cea297af87..181e23a37a 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -190,6 +190,7 @@ obj-$(CONFIG_ATH79_MACH_SC450) += mach-sc450.o obj-$(CONFIG_ATH79_MACH_SMART_300) += mach-smart-300.o obj-$(CONFIG_ATH79_MACH_SOM9331) += mach-som9331.o obj-$(CONFIG_ATH79_MACH_SR3200) += mach-sr3200.o +obj-$(CONFIG_ATH79_MACH_T830) += mach-t830.o obj-$(CONFIG_ATH79_MACH_TELLSTICK_ZNET_LITE) += mach-tellstick-znet-lite.o obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += mach-tew-632brp.o obj-$(CONFIG_ATH79_MACH_TEW_673GRU) += mach-tew-673gru.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-t830.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-t830.c new file mode 100644 index 0000000000..ffdb2ca533 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-t830.c @@ -0,0 +1,127 @@ +/* + * YunCore T830 board support + * + * Copyright (C) 2018 Piotr Dymacz + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include + +#include +#include + +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define T830_GPIO_LED_LAN1 16 +#define T830_GPIO_LED_LAN2 15 +#define T830_GPIO_LED_LAN3 14 +#define T830_GPIO_LED_LAN4 11 +#define T830_GPIO_LED_USB 13 +#define T830_GPIO_LED_WAN 4 +#define T830_GPIO_LED_WLAN 12 + +#define T830_GPIO_BTN_RESET 17 + +#define T830_KEYS_POLL_INTERVAL 20 /* msec */ +#define T830_KEYS_DEBOUNCE_INTERVAL (3 * T830_KEYS_POLL_INTERVAL) + +#define T830_WMAC_CALDATA_OFFSET 0x1000 + +static struct gpio_led t830_gpio_leds[] __initdata = { + { + .name = "t830:green:lan1", + .gpio = T830_GPIO_LED_LAN1, + .active_low = 1, + }, { + .name = "t830:green:lan2", + .gpio = T830_GPIO_LED_LAN2, + .active_low = 1, + }, { + .name = "t830:green:lan3", + .gpio = T830_GPIO_LED_LAN3, + .active_low = 1, + }, { + .name = "t830:green:lan4", + .gpio = T830_GPIO_LED_LAN4, + .active_low = 1, + }, { + .name = "t830:green:usb", + .gpio = T830_GPIO_LED_USB, + .active_low = 1, + .default_state = LEDS_GPIO_DEFSTATE_KEEP, + }, { + .name = "t830:green:wan", + .gpio = T830_GPIO_LED_WAN, + .active_low = 1, + }, { + .name = "t830:green:wlan", + .gpio = T830_GPIO_LED_WLAN, + .active_low = 1, + }, +}; + +static struct gpio_keys_button t830_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = T830_KEYS_DEBOUNCE_INTERVAL, + .gpio = T830_GPIO_BTN_RESET, + .active_low = 1, + }, +}; + +static void __init t830_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff1000); + u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_register_m25p80(NULL); + + ath79_setup_ar933x_phy4_switch(false, false); + + ath79_register_mdio(0, 0x0); + + ath79_switch_data.phy4_mii_en = 1; + ath79_switch_data.phy_poll_mask |= BIT(4); + + /* LAN */ + ath79_eth1_data.duplex = DUPLEX_FULL; + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_init_mac(ath79_eth1_data.mac_addr, mac + 6, 0); + ath79_register_eth(1); + + /* WAN */ + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.phy_mask = BIT(4); + ath79_eth0_data.speed = SPEED_100; + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + ath79_register_eth(0); + + ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE, + AR934X_GPIO_FUNC_CLK_OBS4_EN); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(t830_gpio_leds), + t830_gpio_leds); + + ath79_register_gpio_keys_polled(-1, T830_KEYS_POLL_INTERVAL, + ARRAY_SIZE(t830_gpio_keys), + t830_gpio_keys); + + ath79_register_usb(); + ath79_register_wmac(art, NULL); +} + +MIPS_MACHINE(ATH79_MACH_T830, "T830", "YunCore T830", t830_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index dd6fe75337..da98a811e1 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -223,6 +223,7 @@ enum ath79_mach_type { ATH79_MACH_SMART_300, /* NC-LINK SMART-300 */ ATH79_MACH_SOM9331, /* OpenEmbed SOM9331 */ ATH79_MACH_SR3200, /* YunCore SR3200 */ + ATH79_MACH_T830, /* YunCore T830 */ ATH79_MACH_TELLSTICK_ZNET_LITE, /* TellStick ZNet Lite */ ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */ ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */ diff --git a/target/linux/ar71xx/generic/config-default b/target/linux/ar71xx/generic/config-default index bba1b63564..b3d2df7509 100644 --- a/target/linux/ar71xx/generic/config-default +++ b/target/linux/ar71xx/generic/config-default @@ -138,6 +138,7 @@ CONFIG_ATH79_MACH_SC450=y CONFIG_ATH79_MACH_SMART_300=y CONFIG_ATH79_MACH_SOM9331=y CONFIG_ATH79_MACH_SR3200=y +CONFIG_ATH79_MACH_T830=y CONFIG_ATH79_MACH_TELLSTICK_ZNET_LITE=y CONFIG_ATH79_MACH_TEW_673GRU=y CONFIG_ATH79_MACH_TEW_732BR=y diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk index f23c208caf..2158a9921a 100644 --- a/target/linux/ar71xx/image/generic.mk +++ b/target/linux/ar71xx/image/generic.mk @@ -910,6 +910,18 @@ define Device/xd3200 endef TARGET_DEVICES += xd3200 +define Device/t830 + DEVICE_TITLE := YunCore T830 + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport + BOARDNAME := T830 + IMAGE_SIZE := 16000k + MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro + SUPPORTED_DEVICES := t830 + IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\ + append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) +endef +TARGET_DEVICES += t830 + define Device/tellstick-znet-lite $(Device/tplink-16mlzma) DEVICE_TITLE := TellStick ZNet Lite