From: Antony Antony Date: Tue, 6 Mar 2018 19:08:42 +0000 (+0100) Subject: sunxi: NanoPi NEO Plus2 backport Gigabit Ethernet DT node X-Git-Tag: v19.07.0-rc1~4234 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d6634edfc1f0177cb19e52441d71d7e3e03807c2;p=openwrt%2Fstaging%2Fhauke.git sunxi: NanoPi NEO Plus2 backport Gigabit Ethernet DT node Kernel 4.16 commit 27d7f9297027 Signed-off-by: Antony Antony --- diff --git a/target/linux/sunxi/patches-4.14/061-arm-dts-sun50i-support-for-nanopi-neo-plus2-board.patch b/target/linux/sunxi/patches-4.14/061-arm-dts-sun50i-support-for-nanopi-neo-plus2-board.patch index 535c8b6d1f..9c0e64a902 100644 --- a/target/linux/sunxi/patches-4.14/061-arm-dts-sun50i-support-for-nanopi-neo-plus2-board.patch +++ b/target/linux/sunxi/patches-4.14/061-arm-dts-sun50i-support-for-nanopi-neo-plus2-board.patch @@ -1,6 +1,6 @@ -From d7341305863bcc054ee168bd77864100e0c3b144 Mon Sep 17 00:00:00 2001 +From 54cc3330c2334a0cea8cafc105a29c5d67f9fd32 Mon Sep 17 00:00:00 2001 From: Antony Antony -Date: Thu, 7 Sep 2017 18:42:22 +0200 +Date: Fri, 2 Mar 2018 10:50:48 +0100 Subject: [PATCH] arm64: allwinner: h5: add NanoPi NEO Plus2 DT support Add initial DT for NanoPi NEO Plus2 by FriendlyARM @@ -13,6 +13,7 @@ Add initial DT for NanoPi NEO Plus2 by FriendlyARM - 2x USB 2.0 host ports & 2x USB via headers Kernel 4.15 commit d7341305863b +Kernel 4.16 commit 27d7f9297027 Signed-off-by: Antony Antony @@ -28,7 +29,7 @@ Signed-off-by: Antony Antony subdir-y := $(dts-dirs) --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts -@@ -0,0 +1,193 @@ +@@ -0,0 +1,210 @@ +/* + * Copyright (C) 2017 Antony Antony + * Copyright (C) 2016 ARM Ltd. @@ -84,6 +85,7 @@ Signed-off-by: Antony Antony + compatible = "friendlyarm,nanopi-neo-plus2", "allwinner,sun50i-h5"; + + aliases { ++ ethernet0 = &emac; + serial0 = &uart0; + }; + @@ -164,6 +166,22 @@ Signed-off-by: Antony Antony + status = "okay"; +}; + ++&emac { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&emac_rgmii_pins>; ++ phy-supply = <®_gmac_3v3>; ++ phy-handle = <&ext_rgmii_phy>; ++ phy-mode = "rgmii"; ++ status = "okay"; ++}; ++ ++&external_mdio { ++ ext_rgmii_phy: ethernet-phy@7 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <7>; ++ }; ++}; ++ +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;