From: Joerg Sommer Date: Fri, 2 Mar 2007 18:32:06 +0000 (-0600) Subject: [PATCH] bcm43xx: Fix bug in frequency to channel conversion X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d632f9fa38203ad5bac31e46921812216693b14f;p=openwrt%2Fstaging%2Fblogic.git [PATCH] bcm43xx: Fix bug in frequency to channel conversion The frequency to channel routine in bcm43xx requires that the frequency be in MHz, but that condition is not always met. This patch does the necessary conversion. Signed-off-by: Joerg Sommer Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_wx.c b/drivers/net/wireless/bcm43xx/bcm43xx_wx.c index 7b665e2386a8..d6d9413d7f23 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_wx.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_wx.c @@ -105,18 +105,24 @@ static int bcm43xx_wx_set_channelfreq(struct net_device *net_dev, struct bcm43xx_private *bcm = bcm43xx_priv(net_dev); unsigned long flags; u8 channel; + s8 expon; int freq; int err = -EINVAL; mutex_lock(&bcm->mutex); spin_lock_irqsave(&bcm->irq_lock, flags); - if ((data->freq.m >= 0) && (data->freq.m <= 1000)) { + if ((data->freq.e == 0) && + (data->freq.m >= 0) && (data->freq.m <= 1000)) { channel = data->freq.m; freq = bcm43xx_channel_to_freq(bcm, channel); } else { - channel = bcm43xx_freq_to_channel(bcm, data->freq.m); freq = data->freq.m; + expon = 6 - data->freq.e; + while (--expon >= 0) /* scale down the frequency to MHz */ + freq /= 10; + assert(freq > 1000); + channel = bcm43xx_freq_to_channel(bcm, freq); } if (!ieee80211_is_valid_channel(bcm->ieee, channel)) goto out_unlock;