From: Zoltan Herpai Date: Thu, 19 Nov 2015 14:43:16 +0000 (+0000) Subject: packages: uboot-sunxi: update Lamobo R1 patch X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d5a77a0dbc72ddc5c83f5ce89a41b89f4075a50e;p=openwrt%2Fstaging%2Frmilecki.git packages: uboot-sunxi: update Lamobo R1 patch Signed-off-by: Zoltan HERPAI SVN-Revision: 47516 --- diff --git a/package/boot/uboot-sunxi/patches/002-add-lamobo-r1.diff b/package/boot/uboot-sunxi/patches/002-add-lamobo-r1.diff index 5dd816c1a17..0f7196fc11d 100644 --- a/package/boot/uboot-sunxi/patches/002-add-lamobo-r1.diff +++ b/package/boot/uboot-sunxi/patches/002-add-lamobo-r1.diff @@ -1,18 +1,22 @@ -diff -ruN old/arch/arm/dts/Makefile new/arch/arm/dts/Makefile ---- old/arch/arm/dts/Makefile 2015-07-14 19:32:21.000000000 +0200 -+++ new/arch/arm/dts/Makefile 2015-07-31 23:23:33.518767858 +0200 -@@ -107,6 +107,7 @@ +diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile +index 9c735c6..a32d772 100644 +--- a/arch/arm/dts/Makefile ++++ b/arch/arm/dts/Makefile +@@ -103,6 +103,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ + sun7i-a20-ainol-aw1.dtb \ + sun7i-a20-bananapi.dtb \ + sun7i-a20-bananapro.dtb \ ++ sun7i-a20-lamobo-r1.dtb \ + sun7i-a20-cubieboard2.dtb \ sun7i-a20-cubietruck.dtb \ sun7i-a20-hummingbird.dtb \ - sun7i-a20-i12-tvbox.dtb \ -+ sun7i-a20-lamobo-r1.dtb \ - sun7i-a20-m3.dtb \ - sun7i-a20-m5.dtb \ - sun7i-a20-mk808c.dtb \ -diff -ruN old/arch/arm/dts/sun7i-a20-lamobo-r1.dts new/arch/arm/dts/sun7i-a20-lamobo-r1.dts ---- old/arch/arm/dts/sun7i-a20-lamobo-r1.dts 1970-01-01 01:00:00.000000000 +0100 -+++ new/arch/arm/dts/sun7i-a20-lamobo-r1.dts 2015-07-31 23:19:30.811206714 +0200 -@@ -0,0 +1,239 @@ +diff --git a/arch/arm/dts/sun7i-a20-lamobo-r1.dts +b/arch/arm/dts/sun7i-a20-lamobo-r1.dts +new file mode 100644 +index 0000000..a77fb5c +--- /dev/null ++++ b/arch/arm/dts/sun7i-a20-lamobo-r1.dts +@@ -0,0 +1,231 @@ +/* + * Copyright 2014 Hans de Goede + * @@ -33,11 +37,6 @@ diff -ruN old/arch/arm/dts/sun7i-a20-lamobo-r1.dts new/arch/arm/dts/sun7i-a20-la + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * -+ * You should have received a copy of the GNU General Public -+ * License along with this file; if not, write to the Free -+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -+ * MA 02110-1301 USA -+ * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person @@ -71,8 +70,8 @@ diff -ruN old/arch/arm/dts/sun7i-a20-lamobo-r1.dts new/arch/arm/dts/sun7i-a20-la +#include + +/ { -+ model = "Lamobo R1"; -+ compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20"; ++ model = "Lamobo Banana Pi R1"; ++ compatible = "lemaker,bananapi", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; @@ -80,198 +79,207 @@ diff -ruN old/arch/arm/dts/sun7i-a20-lamobo-r1.dts new/arch/arm/dts/sun7i-a20-la + serial2 = &uart7; + }; + -+ soc@01c00000 { -+ spi0: spi@01c05000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins_a>; -+ status = "okay"; -+ }; ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; + -+ mmc0: mmc@01c0f000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>; -+ vmmc-supply = <®_vcc3v3>; -+ bus-width = <4>; -+ cd-gpios = <&pio 7 10 0>; /* PH10 */ -+ cd-inverted; -+ status = "okay"; -+ }; ++ leds { ++ compatible = "gpio-leds"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&led_pins_bananapi>; + -+ usbphy: phy@01c13400 { -+ usb1_vbus-supply = <®_usb1_vbus>; -+ usb2_vbus-supply = <®_usb2_vbus>; -+ status = "okay"; ++ green { ++ label = "bananapi:green:usr"; ++ gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; + }; ++ }; + -+ ehci0: usb@01c14000 { -+ status = "okay"; -+ }; ++ reg_gmac_3v3: gmac-3v3 { ++ compatible = "regulator-fixed"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&gmac_power_pin_bananapi>; ++ regulator-name = "gmac-3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ startup-delay-us = <100000>; ++ enable-active-high; ++ gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; ++ }; ++}; + -+ ohci0: usb@01c14400 { -+ status = "okay"; -+ }; ++&ahci { ++ status = "okay"; ++}; + -+ ahci: sata@01c18000 { -+ status = "okay"; -+ }; ++&ehci0 { ++ status = "okay"; ++}; + -+ ehci1: usb@01c1c000 { -+ status = "okay"; -+ }; ++&ehci1 { ++ status = "okay"; ++}; + -+ ohci1: usb@01c1c400 { -+ status = "okay"; -+ }; ++&gmac { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&gmac_pins_rgmii_a>; ++ phy = <&phy1>; ++ phy-mode = "rgmii"; ++ phy-supply = <®_gmac_3v3>; ++ status = "okay"; + -+ pinctrl@01c20800 { -+ mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { -+ allwinner,pins = "PH10"; -+ allwinner,function = "gpio_in"; -+ allwinner,drive = <0>; -+ allwinner,pull = <1>; -+ }; -+ -+ gmac_power_pin_bananapi: gmac_power_pin@0 { -+ allwinner,pins = "PH23"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ led_pins_bananapi: led_pins@0 { -+ allwinner,pins = "PH24"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ ahci_pwr_pin_a: ahci_pwr_pin@0 { -+ allwinner,pins = "PB3"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ }; ++ phy1: ethernet-phy@1 { ++ reg = <1>; ++ }; ++}; + ++&i2c0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins_a>; ++ status = "okay"; + -+ uart0: serial@01c28000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins_a>; -+ status = "okay"; -+ }; ++ axp209: pmic@34 { ++ compatible = "x-powers,axp209"; ++ reg = <0x34>; ++ interrupt-parent = <&nmi_intc>; ++ interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + -+ uart3: serial@01c28c00 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart3_pins_b>; -+ status = "okay"; -+ }; ++ interrupt-controller; ++ #interrupt-cells = <1>; ++ }; ++}; + -+ uart7: serial@01c29c00 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart7_pins_a>; -+ status = "okay"; -+ }; ++&i2c2 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c2_pins_a>; ++ status = "okay"; ++}; + -+ i2c0: i2c@01c2ac00 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins_a>; -+ status = "okay"; ++&ir0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&ir0_rx_pins_a>; ++ status = "okay"; ++}; + -+ axp209: pmic@34 { -+ compatible = "x-powers,axp209"; -+ reg = <0x34>; -+ interrupt-parent = <&nmi_intc>; -+ interrupts = <0 8>; ++&mmc0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>; ++ vmmc-supply = <®_vcc3v3>; ++ bus-width = <4>; ++ cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ ++ cd-inverted; ++ status = "okay"; ++}; + -+ interrupt-controller; -+ #interrupt-cells = <1>; -+ }; -+ }; ++&ohci0 { ++ status = "okay"; ++}; + -+ i2c2: i2c@01c2b400 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c2_pins_a>; -+ status = "okay"; -+ }; ++&ohci1 { ++ status = "okay"; ++}; + -+ gmac: ethernet@01c50000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&gmac_pins_rgmii_a>; -+ phy = <&phy1>; -+ phy-mode = "rgmii"; -+ phy-supply = <®_gmac_3v3>; -+ status = "okay"; -+ -+ phy1: ethernet-phy@1 { -+ reg = <1>; -+ }; -+ }; ++&pio { ++ mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { ++ allwinner,pins = "PH10"; ++ allwinner,function = "gpio_in"; ++ allwinner,drive = ; ++ allwinner,pull = ; + }; + -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&led_pins_bananapi>; -+ -+ green { -+ label = "bananapi:green:usr"; -+ gpios = <&pio 7 24 0>; -+ }; ++ gmac_power_pin_bananapi: gmac_power_pin@0 { ++ allwinner,pins = "PH23"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = ; ++ allwinner,pull = ; + }; + -+ reg_usb1_vbus: usb1-vbus { -+ status = "okay"; ++ led_pins_bananapi: led_pins@0 { ++ allwinner,pins = "PH24"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = ; ++ allwinner,pull = ; + }; + -+ reg_usb2_vbus: usb2-vbus { -+ status = "okay"; -+ }; ++ ir0_tx_pins_a: ir0@1 { ++ allwinner,pins = "PB3"; ++ allwinner,function = "ir0"; ++ allwinner,drive = ; ++ allwinner,pull = ; ++ }; + -+ reg_gmac_3v3: gmac-3v3 { -+ compatible = "regulator-fixed"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&gmac_power_pin_bananapi>; -+ regulator-name = "gmac-3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ startup-delay-us = <100000>; -+ enable-active-high; -+ gpio = <&pio 7 23 0>; -+ }; ++}; + -+ reg_ahci_5v: ahci-5v { -+ compatible = "regulator-fixed"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&ahci_pwr_pin_a>; -+ regulator-name = "ahci-5v"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ enable-active-high; -+ gpio = <&pio 1 3 0>; -+ status = "okay"; -+ }; ++®_usb1_vbus { ++ status = "okay"; +}; -diff -ruN old/configs/Lamobo_R1_defconfig new/configs/Lamobo_R1_defconfig ---- old/configs/Lamobo_R1_defconfig 1970-01-01 01:00:00.000000000 +0100 -+++ new/configs/Lamobo_R1_defconfig 2015-07-31 23:02:06.000000000 +0200 -@@ -0,0 +1,19 @@ -+CONFIG_SPL=y -+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI,SATAPWR=SUNXI_GPB(3)" -+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-lamobo-r1" -+CONFIG_GMAC_TX_DELAY=4 ++ ++®_usb2_vbus { ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins_a>, ++ <&spi0_cs0_pins_a>, ++ <&spi0_cs1_pins_a>; ++ status = "okay"; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins_a>; ++ status = "okay"; ++}; ++ ++&uart3 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart3_pins_b>; ++ status = "okay"; ++}; ++ ++&uart7 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart7_pins_a>; ++ status = "okay"; ++}; ++ ++&usbphy { ++ usb1_vbus-supply = <®_usb1_vbus>; ++ usb2_vbus-supply = <®_usb2_vbus>; ++ status = "okay"; ++}; +diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS +index 7a42055..abf2c1c 100644 +--- a/board/sunxi/MAINTAINERS ++++ b/board/sunxi/MAINTAINERS +@@ -30,6 +30,7 @@ F: include/configs/sun7i.h + F: configs/A20-OLinuXino_MICRO_defconfig + F: configs/Bananapi_defconfig + F: configs/Bananapro_defconfig ++F: configs/Lamobo_R1_defconfig + F: configs/i12-tvbox_defconfig + F: configs/Linksprite_pcDuino3_defconfig + F: configs/Linksprite_pcDuino3_fdt_defconfig +diff --git a/configs/Lamobo_R1_defconfig b/configs/Lamobo_R1_defconfig +new file mode 100644 +index 0000000..bf665e7 +--- /dev/null ++++ b/configs/Lamobo_R1_defconfig +@@ -0,0 +1,17 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN7I=y +CONFIG_DRAM_CLK=432 -+CONFIG_DRAM_ZQ=127 -+CONFIG_DRAM_EMR1=4 ++CONFIG_GMAC_TX_DELAY=4 ++CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-lamobo-r1" ++CONFIG_SPL=y ++CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI" +CONFIG_ETH_DESIGNWARE=y -+CONFIG_NETDEVICES=y -+CONFIG_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y ++CONFIG_NETDEVICES=y ++CONFIG_NET=y