From: Dustin Gathmann Date: Sun, 19 Jul 2020 22:07:44 +0000 (+0200) Subject: lantiq/xrx200: make WLAN button responsive on Fritzbox 7360 & 7362 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d5a148f5c8f6d6dee7041fd348bd0f52839d0f4e;p=openwrt%2Fstaging%2Fthess.git lantiq/xrx200: make WLAN button responsive on Fritzbox 7360 & 7362 Pressing the 'WLAN' button should enable/disable wireless activity. Currently, the button is mapped to the KEY_WLAN, which will not have this effect. This patch changes the mapping of the WLAN button, so a button press will emit an action for the 'rfkill' key instead of 'wlan'. Apparently, this is what stock OpenWRT expects. This fix is analogous to the preceding patch for Fritzbox 3370. Signed-off-by: Dustin Gathmann --- diff --git a/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi b/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi index 1553d2f7f4..f12485b3e1 100644 --- a/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi +++ b/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi @@ -40,7 +40,7 @@ wifi { label = "wifi"; gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; - linux,code = ; + linux,code = ; }; }; diff --git a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi index 70dff97ec1..bd89e59511 100644 --- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi +++ b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi @@ -40,7 +40,7 @@ wifi { label = "wifi"; gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; - linux,code = ; + linux,code = ; }; };