From: Ansuel Smith Date: Sun, 28 Feb 2021 23:58:57 +0000 (+0100) Subject: ipq806x: copy kernel 5.4 patches to 5.10 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d53be2a2e98129ecf32009893ec46b1ce644721a;p=openwrt%2Fstaging%2Fadrian.git ipq806x: copy kernel 5.4 patches to 5.10 Copy kernel 5.4 patches and config to 5.10 Signed-off-by: Ansuel Smith --- diff --git a/target/linux/ipq806x/config-5.10 b/target/linux/ipq806x/config-5.10 new file mode 100644 index 0000000000..e6160bd455 --- /dev/null +++ b/target/linux/ipq806x/config-5.10 @@ -0,0 +1,526 @@ +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_APQ_GCC_8084 is not set +# CONFIG_APQ_MMCC_8084 is not set +CONFIG_AR8216_PHY=y +CONFIG_ARCH_32BIT_OFF_T=y +CONFIG_ARCH_CLOCKSOURCE_DATA=y +CONFIG_ARCH_HAS_BINFMT_FLAT=y +CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y +CONFIG_ARCH_HAS_FORTIFY_SOURCE=y +CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y +CONFIG_ARCH_HAS_KCOV=y +CONFIG_ARCH_HAS_KEEPINITRD=y +CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y +CONFIG_ARCH_HAS_PHYS_TO_DMA=y +CONFIG_ARCH_HAS_SETUP_DMA_OPS=y +CONFIG_ARCH_HAS_SET_MEMORY=y +CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y +CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y +CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y +CONFIG_ARCH_HAS_TICK_BROADCAST=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_KEEP_MEMBLOCK=y +# CONFIG_ARCH_MDM9615 is not set +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_ARCH_MSM8960=y +CONFIG_ARCH_MSM8974=y +CONFIG_ARCH_MSM8X60=y +CONFIG_ARCH_MULTIPLATFORM=y +CONFIG_ARCH_MULTI_V6_V7=y +CONFIG_ARCH_MULTI_V7=y +CONFIG_ARCH_NR_GPIO=0 +CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y +CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y +CONFIG_ARCH_QCOM=y +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y +CONFIG_ARCH_WANT_GENERAL_HUGETLB=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_ARM=y +CONFIG_ARM_AMBA=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ARCH_TIMER=y +CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set +CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y +CONFIG_ARM_CPUIDLE=y +CONFIG_ARM_CPU_SUSPEND=y +# CONFIG_ARM_CPU_TOPOLOGY is not set +CONFIG_ARM_GIC=y +CONFIG_ARM_HAS_SG_CHAIN=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_ARM_L1_CACHE_SHIFT_6=y +CONFIG_ARM_MODULE_PLTS=y +CONFIG_ARM_PATCH_IDIV=y +CONFIG_ARM_PATCH_PHYS_VIRT=y +# CONFIG_ARM_QCOM_CPUFREQ_HW is not set +CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y +CONFIG_ARM_QCOM_CPUIDLE=y +# CONFIG_ARM_SMMU is not set +CONFIG_ARM_THUMB=y +CONFIG_ARM_UNWIND=y +CONFIG_ARM_VIRT_EXT=y +CONFIG_AT803X_PHY=y +CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_MQ_PCI=y +CONFIG_BOUNCE=y +# CONFIG_CACHE_L2X0 is not set +CONFIG_CC_HAS_KASAN_GENERIC=y +CONFIG_CLKDEV_LOOKUP=y +CONFIG_CLKSRC_QCOM=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_CMDLINE_OVERRIDE=y +CONFIG_COMMON_CLK=y +CONFIG_COMMON_CLK_QCOM=y +CONFIG_COMPAT_32BIT_TIME=y +CONFIG_CPUFREQ_DT=y +CONFIG_CPUFREQ_DT_PLATDEV=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +CONFIG_CPU_FREQ_GOV_ATTR_SET=y +CONFIG_CPU_FREQ_GOV_COMMON=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y +CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_PM=y +CONFIG_CPU_RMAP=y +CONFIG_CPU_SPECTRE=y +CONFIG_CPU_THERMAL=y +CONFIG_CPU_THUMB_CAPABLE=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_V7=y +CONFIG_CRC16=y +# CONFIG_CRC32_SARWATE is not set +CONFIG_CRC32_SLICEBY8=y +CONFIG_CRYPTO_ACOMP2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_DEV_QCOM_RNG=y +CONFIG_CRYPTO_DRBG=y +CONFIG_CRYPTO_DRBG_HMAC=y +CONFIG_CRYPTO_DRBG_MENU=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_HASH_INFO=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_JITTERENTROPY=y +CONFIG_CRYPTO_LIB_SHA256=y +CONFIG_CRYPTO_LZO=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_NULL2=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_ZSTD=y +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_DEBUG_GPIO=y +CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" +CONFIG_DMADEVICES=y +CONFIG_DMA_ENGINE=y +CONFIG_DMA_OF=y +CONFIG_DMA_REMAP=y +CONFIG_DMA_VIRTUAL_CHANNELS=y +CONFIG_DTC=y +CONFIG_DT_IDLE_STATES=y +# CONFIG_DWMAC_GENERIC is not set +CONFIG_DWMAC_IPQ806X=y +# CONFIG_DWMAC_QCOM_ETHQOS is not set +CONFIG_DYNAMIC_DEBUG=y +CONFIG_EDAC_ATOMIC_SCRUB=y +CONFIG_EDAC_SUPPORT=y +CONFIG_ETHERNET_PACKET_MANGLE=y +CONFIG_FIXED_PHY=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_FW_LOADER_PAGED_BUF=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_GENERIC_EARLY_IOREMAP=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y +CONFIG_GENERIC_IRQ_MULTI_HANDLER=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +CONFIG_GENERIC_MSI_IRQ=y +CONFIG_GENERIC_MSI_IRQ_DOMAIN=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_PHY=y +CONFIG_GENERIC_PINCONF=y +CONFIG_GENERIC_PINCTRL_GROUPS=y +CONFIG_GENERIC_PINMUX_FUNCTIONS=y +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GPIOLIB=y +CONFIG_GPIOLIB_IRQCHIP=y +CONFIG_GRO_CELLS=y +CONFIG_HANDLE_DOMAIN_IRQ=y +CONFIG_HARDEN_BRANCH_PREDICTOR=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_HAVE_ARCH_BITREVERSE=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_PFN_VALID=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_ARM_ARCH_TIMER=y +CONFIG_HAVE_ARM_SMCCC=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_COPY_THREAD_TLS=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y +CONFIG_HAVE_EBPF_JIT=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_OPTPROBES=y +CONFIG_HAVE_PCI=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_PROC_CPU=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_RSEQ=y +CONFIG_HAVE_SMP=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_UID16=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HIGHMEM=y +# CONFIG_HIGHPTE is not set +CONFIG_HWMON=y +CONFIG_HWSPINLOCK=y +CONFIG_HWSPINLOCK_QCOM=y +CONFIG_HW_RANDOM=y +CONFIG_HZ=100 +CONFIG_HZ_100=y +CONFIG_HZ_FIXED=0 +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_QUP=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_IOMMU_DEBUGFS is not set +# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set +# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set +CONFIG_IOMMU_SUPPORT=y +# CONFIG_IPQ_GCC_4019 is not set +CONFIG_IPQ_GCC_806X=y +# CONFIG_IPQ_GCC_8074 is not set +# CONFIG_IPQ_LCC_806X is not set +CONFIG_IRQCHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_DOMAIN_HIERARCHY=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_WORK=y +CONFIG_KPSS_XCC=y +CONFIG_KRAITCC=y +CONFIG_KRAIT_CLOCKS=y +CONFIG_KRAIT_L2_ACCESSORS=y +CONFIG_LEDS_TRIGGER_DISK=y +CONFIG_LIBFDT=y +CONFIG_LOCK_DEBUGGING_SUPPORT=y +CONFIG_LOCK_SPIN_ON_OWNER=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_MDIO_BITBANG=y +CONFIG_MDIO_BUS=y +CONFIG_MDIO_DEVICE=y +CONFIG_MDIO_GPIO=y +CONFIG_MDIO_IPQ8064=y +# CONFIG_MDM_GCC_9615 is not set +# CONFIG_MDM_LCC_9615 is not set +CONFIG_MEMFD_CREATE=y +CONFIG_MFD_QCOM_RPM=y +# CONFIG_MFD_SPMI_PMIC is not set +CONFIG_MFD_SYSCON=y +CONFIG_MIGHT_HAVE_CACHE_L2X0=y +CONFIG_MIGRATION=y +CONFIG_MMC=y +CONFIG_MMC_ARMMMCI=y +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_MINORS=16 +CONFIG_MMC_QCOM_DML=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_IO_ACCESSORS=y +CONFIG_MMC_SDHCI_MSM=y +# CONFIG_MMC_SDHCI_PCI is not set +CONFIG_MMC_SDHCI_PLTFM=y +# CONFIG_MMC_TIFM_SD is not set +CONFIG_MODULES_USE_ELF_REL=y +CONFIG_MSM_GCC_8660=y +# CONFIG_MSM_GCC_8916 is not set +# CONFIG_MSM_GCC_8960 is not set +# CONFIG_MSM_GCC_8974 is not set +# CONFIG_MSM_GCC_8994 is not set +# CONFIG_MSM_GCC_8996 is not set +# CONFIG_MSM_GCC_8998 is not set +# CONFIG_MSM_IOMMU is not set +# CONFIG_MSM_LCC_8960 is not set +# CONFIG_MSM_MMCC_8960 is not set +# CONFIG_MSM_MMCC_8974 is not set +# CONFIG_MSM_MMCC_8996 is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_NAND_CORE=y +CONFIG_MTD_NAND_ECC_SW_HAMMING=y +CONFIG_MTD_NAND_QCOM=y +CONFIG_MTD_QCOM_SMEM_PARTS=y +CONFIG_MTD_RAW_NAND=y +CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_SPLIT_FIRMWARE=y +CONFIG_MTD_SPLIT_FIT_FW=y +CONFIG_MTD_SPLIT_UIMAGE_FW=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_BEB_LIMIT=20 +CONFIG_MTD_UBI_BLOCK=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEON=y +CONFIG_NET_DEVLINK=y +CONFIG_NET_DSA=y +CONFIG_NET_DSA_QCA8K=y +CONFIG_NET_DSA_TAG_QCA=y +CONFIG_NET_FLOW_LIMIT=y +CONFIG_NET_PTP_CLASSIFY=y +CONFIG_NET_SWITCHDEV=y +CONFIG_NLS=y +CONFIG_NO_HZ=y +CONFIG_NO_HZ_COMMON=y +CONFIG_NO_HZ_IDLE=y +CONFIG_NR_CPUS=2 +CONFIG_NVMEM=y +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_KOBJ=y +CONFIG_OF_MDIO=y +CONFIG_OF_NET=y +CONFIG_OLD_SIGACTION=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_PADATA=y +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PAGE_POOL=y +CONFIG_PCI=y +CONFIG_PCIEAER=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCIE_DW=y +CONFIG_PCIE_DW_HOST=y +CONFIG_PCIE_QCOM=y +CONFIG_PCI_DEBUG=y +CONFIG_PCI_DISABLE_COMMON_QUIRKS=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_DOMAINS_GENERIC=y +CONFIG_PCI_MSI=y +CONFIG_PCI_MSI_IRQ_DOMAIN=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PGTABLE_LEVELS=2 +CONFIG_PHYLIB=y +CONFIG_PHYLINK=y +# CONFIG_PHY_QCOM_APQ8064_SATA is not set +CONFIG_PHY_QCOM_IPQ806X_SATA=y +# CONFIG_PHY_QCOM_PCIE2 is not set +# CONFIG_PHY_QCOM_QMP is not set +# CONFIG_PHY_QCOM_QUSB2 is not set +# CONFIG_PHY_QCOM_UFS is not set +CONFIG_PINCTRL=y +# CONFIG_PINCTRL_APQ8064 is not set +# CONFIG_PINCTRL_APQ8084 is not set +# CONFIG_PINCTRL_IPQ4019 is not set +CONFIG_PINCTRL_IPQ8064=y +# CONFIG_PINCTRL_IPQ8074 is not set +# CONFIG_PINCTRL_MDM9615 is not set +CONFIG_PINCTRL_MSM=y +# CONFIG_PINCTRL_MSM8660 is not set +# CONFIG_PINCTRL_MSM8916 is not set +# CONFIG_PINCTRL_MSM8960 is not set +# CONFIG_PINCTRL_MSM8994 is not set +# CONFIG_PINCTRL_MSM8996 is not set +# CONFIG_PINCTRL_MSM8998 is not set +# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set +# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set +# CONFIG_PINCTRL_QCS404 is not set +# CONFIG_PINCTRL_SC7180 is not set +# CONFIG_PINCTRL_SDM660 is not set +# CONFIG_PINCTRL_SDM845 is not set +# CONFIG_PINCTRL_SM8150 is not set +CONFIG_PM_OPP=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_MSM=y +CONFIG_POWER_SUPPLY=y +CONFIG_PPS=y +CONFIG_PRINTK_TIME=y +CONFIG_PTP_1588_CLOCK=y +# CONFIG_QCOM_A53PLL is not set +CONFIG_QCOM_ADM=y +CONFIG_QCOM_BAM_DMA=y +CONFIG_QCOM_CLK_RPM=y +# CONFIG_QCOM_COMMAND_DB is not set +# CONFIG_QCOM_EBI2 is not set +# CONFIG_QCOM_GENI_SE is not set +CONFIG_QCOM_GSBI=y +CONFIG_QCOM_HFPLL=y +# CONFIG_QCOM_IOMMU is not set +# CONFIG_QCOM_LLCC is not set +# CONFIG_QCOM_PDC is not set +CONFIG_QCOM_PM=y +CONFIG_QCOM_QFPROM=y +# CONFIG_QCOM_RMTFS_MEM is not set +CONFIG_QCOM_RPMCC=y +CONFIG_QCOM_SCM=y +CONFIG_QCOM_SCM_32=y +# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set +CONFIG_QCOM_SMEM=y +# CONFIG_QCOM_SMSM is not set +# CONFIG_QCOM_SOCINFO is not set +CONFIG_QCOM_TCSR=y +CONFIG_QCOM_TSENS=y +CONFIG_QCOM_WDT=y +# CONFIG_QCS_GCC_404 is not set +# CONFIG_QCS_TURING_404 is not set +# CONFIG_QRTR is not set +CONFIG_RAS=y +CONFIG_RATIONAL=y +CONFIG_RCU_CPU_STALL_TIMEOUT=21 +CONFIG_RCU_NEED_SEGCBLIST=y +CONFIG_RCU_STALL_COMMON=y +CONFIG_REFCOUNT_FULL=y +CONFIG_REGMAP=y +CONFIG_REGMAP_MMIO=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_QCOM_RPM=y +# CONFIG_REGULATOR_QCOM_SPMI is not set +CONFIG_RESET_CONTROLLER=y +# CONFIG_RESET_QCOM_AOSS is not set +# CONFIG_RESET_QCOM_PDC is not set +CONFIG_RFS_ACCEL=y +CONFIG_RPS=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_I2C_AND_SPI=y +CONFIG_RTC_MC146818_LIB=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +# CONFIG_SDM_CAMCC_845 is not set +# CONFIG_SDM_DISPCC_845 is not set +# CONFIG_SDM_GCC_660 is not set +# CONFIG_SDM_GCC_845 is not set +# CONFIG_SDM_GPUCC_845 is not set +# CONFIG_SDM_LPASSCC_845 is not set +# CONFIG_SDM_VIDEOCC_845 is not set +CONFIG_SERIAL_8250_FSL=y +CONFIG_SERIAL_MCTRL_GPIO=y +CONFIG_SERIAL_MSM=y +CONFIG_SERIAL_MSM_CONSOLE=y +CONFIG_SGL_ALLOC=y +CONFIG_SMP=y +CONFIG_SMP_ON_UP=y +# CONFIG_SM_GCC_8150 is not set +CONFIG_SPARSE_IRQ=y +CONFIG_SPI=y +CONFIG_SPI_MASTER=y +CONFIG_SPI_MEM=y +CONFIG_SPI_QUP=y +CONFIG_SPMI=y +CONFIG_SPMI_MSM_PMIC_ARB=y +# CONFIG_SPMI_PMIC_CLKDIV is not set +CONFIG_SRCU=y +CONFIG_STMMAC_ETH=y +CONFIG_STMMAC_PLATFORM=y +# CONFIG_STMMAC_SELFTESTS is not set +CONFIG_SWCONFIG=y +CONFIG_SWCONFIG_LEDS=y +CONFIG_SWPHY=y +CONFIG_SWP_EMULATE=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_THERMAL=y +CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y +CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 +CONFIG_THERMAL_GOV_STEP_WISE=y +CONFIG_THERMAL_HWMON=y +CONFIG_THERMAL_OF=y +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_TIMER_OF=y +CONFIG_TIMER_PROBE=y +CONFIG_TREE_RCU=y +CONFIG_TREE_SRCU=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +CONFIG_UBIFS_FS_ZSTD=y +# CONFIG_UCLAMP_TASK is not set +CONFIG_UEVENT_HELPER_PATH="" +CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" +CONFIG_UNWINDER_ARM=y +CONFIG_USB=y +CONFIG_USB_COMMON=y +CONFIG_USB_SUPPORT=y +CONFIG_USE_OF=y +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_WATCHDOG_CORE=y +CONFIG_XPS=y +CONFIG_XXHASH=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_BCJ=y +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZLIB_DEFLATE=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZSTD_COMPRESS=y +CONFIG_ZSTD_DECOMPRESS=y diff --git a/target/linux/ipq806x/patches-5.10/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch b/target/linux/ipq806x/patches-5.10/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch new file mode 100644 index 0000000000..83d7bbc6f4 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch @@ -0,0 +1,71 @@ +From 28d0ed88f536dd639adf1b0c7c08e04be3c8f294 Mon Sep 17 00:00:00 2001 +From: Thomas Pedersen +Date: Mon, 16 May 2016 17:58:50 -0700 +Subject: [PATCH 01/69] dtbindings: qcom_adm: Fix channel specifiers + +Original patch from Andy Gross. + +This patch removes the crci information from the dma +channel property. At least one client device requires +using more than one CRCI value for a channel. This does +not match the current binding and the crci information +needs to be removed. + +Instead, the client device will provide this information +via other means. + +Signed-off-by: Andy Gross +Signed-off-by: Thomas Pedersen +--- + Documentation/devicetree/bindings/dma/qcom_adm.txt | 16 ++++++---------- + 1 file changed, 6 insertions(+), 10 deletions(-) + +--- a/Documentation/devicetree/bindings/dma/qcom_adm.txt ++++ b/Documentation/devicetree/bindings/dma/qcom_adm.txt +@@ -4,8 +4,7 @@ Required properties: + - compatible: must contain "qcom,adm" for IPQ/APQ8064 and MSM8960 + - reg: Address range for DMA registers + - interrupts: Should contain one interrupt shared by all channels +-- #dma-cells: must be <2>. First cell denotes the channel number. Second cell +- denotes CRCI (client rate control interface) flow control assignment. ++- #dma-cells: must be <1>. First cell denotes the channel number. + - clocks: Should contain the core clock and interface clock. + - clock-names: Must contain "core" for the core clock and "iface" for the + interface clock. +@@ -22,7 +21,7 @@ Example: + compatible = "qcom,adm"; + reg = <0x18300000 0x100000>; + interrupts = <0 170 0>; +- #dma-cells = <2>; ++ #dma-cells = <1>; + + clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>; + clock-names = "core", "iface"; +@@ -35,15 +34,12 @@ Example: + qcom,ee = <0>; + }; + +-DMA clients must use the format descripted in the dma.txt file, using a three ++DMA clients must use the format descripted in the dma.txt file, using a two + cell specifier for each channel. + +-Each dmas request consists of 3 cells: ++Each dmas request consists of two cells: + 1. phandle pointing to the DMA controller + 2. channel number +- 3. CRCI assignment, if applicable. If no CRCI flow control is required, use 0. +- The CRCI is used for flow control. It identifies the peripheral device that +- is the source/destination for the transferred data. + + Example: + +@@ -55,7 +51,7 @@ Example: + + cs-gpios = <&qcom_pinmux 20 0>; + +- dmas = <&adm_dma 6 9>, +- <&adm_dma 5 10>; ++ dmas = <&adm_dma 6>, ++ <&adm_dma 5>; + dma-names = "rx", "tx"; + }; diff --git a/target/linux/ipq806x/patches-5.10/0002-dmaengine-Add-ADM-driver.patch b/target/linux/ipq806x/patches-5.10/0002-dmaengine-Add-ADM-driver.patch new file mode 100644 index 0000000000..aa7d2e791e --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/0002-dmaengine-Add-ADM-driver.patch @@ -0,0 +1,966 @@ +From 563fa24db4e529c5a3311928d73a8a90531ee527 Mon Sep 17 00:00:00 2001 +From: Thomas Pedersen +Date: Mon, 16 May 2016 17:58:51 -0700 +Subject: [PATCH 02/69] dmaengine: Add ADM driver + +Original patch by Andy Gross. + +Add the DMA engine driver for the QCOM Application Data Mover (ADM) DMA +controller found in the MSM8x60 and IPQ/APQ8064 platforms. + +The ADM supports both memory to memory transactions and memory +to/from peripheral device transactions. The controller also provides flow +control capabilities for transactions to/from peripheral devices. + +The initial release of this driver supports slave transfers to/from peripherals +and also incorporates CRCI (client rate control interface) flow control. + +Signed-off-by: Andy Gross +Signed-off-by: Thomas Pedersen +--- + drivers/dma/qcom/Kconfig | 10 + + drivers/dma/qcom/Makefile | 1 + + drivers/dma/qcom/qcom_adm.c | 900 ++++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 911 insertions(+) + create mode 100644 drivers/dma/qcom/qcom_adm.c + +--- a/drivers/dma/qcom/Kconfig ++++ b/drivers/dma/qcom/Kconfig +@@ -28,3 +28,13 @@ config QCOM_HIDMA + (user to kernel, kernel to kernel, etc.). It only supports + memcpy interface. The core is not intended for general + purpose slave DMA. ++ ++config QCOM_ADM ++ tristate "Qualcomm ADM support" ++ depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM) ++ select DMA_ENGINE ++ select DMA_VIRTUAL_CHANNELS ++ ---help--- ++ Enable support for the Qualcomm ADM DMA controller. This controller ++ provides DMA capabilities for both general purpose and on-chip ++ peripheral devices. +--- a/drivers/dma/qcom/Makefile ++++ b/drivers/dma/qcom/Makefile +@@ -4,3 +4,4 @@ obj-$(CONFIG_QCOM_HIDMA_MGMT) += hdma_mg + hdma_mgmt-objs := hidma_mgmt.o hidma_mgmt_sys.o + obj-$(CONFIG_QCOM_HIDMA) += hdma.o + hdma-objs := hidma_ll.o hidma.o hidma_dbg.o ++obj-$(CONFIG_QCOM_ADM) += qcom_adm.o +--- /dev/null ++++ b/drivers/dma/qcom/qcom_adm.c +@@ -0,0 +1,914 @@ ++/* ++ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "../dmaengine.h" ++#include "../virt-dma.h" ++ ++/* ADM registers - calculated from channel number and security domain */ ++#define ADM_CHAN_MULTI 0x4 ++#define ADM_CI_MULTI 0x4 ++#define ADM_CRCI_MULTI 0x4 ++#define ADM_EE_MULTI 0x800 ++#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * chan) ++#define ADM_EE_OFFS(ee) (ADM_EE_MULTI * ee) ++#define ADM_CHAN_EE_OFFS(chan, ee) (ADM_CHAN_OFFS(chan) + ADM_EE_OFFS(ee)) ++#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * chan) ++#define ADM_CI_OFFS(ci) (ADM_CHAN_OFF(ci)) ++#define ADM_CH_CMD_PTR(chan, ee) (ADM_CHAN_EE_OFFS(chan, ee)) ++#define ADM_CH_RSLT(chan, ee) (0x40 + ADM_CHAN_EE_OFFS(chan, ee)) ++#define ADM_CH_FLUSH_STATE0(chan, ee) (0x80 + ADM_CHAN_EE_OFFS(chan, ee)) ++#define ADM_CH_STATUS_SD(chan, ee) (0x200 + ADM_CHAN_EE_OFFS(chan, ee)) ++#define ADM_CH_CONF(chan) (0x240 + ADM_CHAN_OFFS(chan)) ++#define ADM_CH_RSLT_CONF(chan, ee) (0x300 + ADM_CHAN_EE_OFFS(chan, ee)) ++#define ADM_SEC_DOMAIN_IRQ_STATUS(ee) (0x380 + ADM_EE_OFFS(ee)) ++#define ADM_CI_CONF(ci) (0x390 + ci * ADM_CI_MULTI) ++#define ADM_GP_CTL 0x3d8 ++#define ADM_CRCI_CTL(crci, ee) (0x400 + crci * ADM_CRCI_MULTI + \ ++ ADM_EE_OFFS(ee)) ++ ++/* channel status */ ++#define ADM_CH_STATUS_VALID BIT(1) ++ ++/* channel result */ ++#define ADM_CH_RSLT_VALID BIT(31) ++#define ADM_CH_RSLT_ERR BIT(3) ++#define ADM_CH_RSLT_FLUSH BIT(2) ++#define ADM_CH_RSLT_TPD BIT(1) ++ ++/* channel conf */ ++#define ADM_CH_CONF_SHADOW_EN BIT(12) ++#define ADM_CH_CONF_MPU_DISABLE BIT(11) ++#define ADM_CH_CONF_PERM_MPU_CONF BIT(9) ++#define ADM_CH_CONF_FORCE_RSLT_EN BIT(7) ++#define ADM_CH_CONF_SEC_DOMAIN(ee) (((ee & 0x3) << 4) | ((ee & 0x4) << 11)) ++ ++/* channel result conf */ ++#define ADM_CH_RSLT_CONF_FLUSH_EN BIT(1) ++#define ADM_CH_RSLT_CONF_IRQ_EN BIT(0) ++ ++/* CRCI CTL */ ++#define ADM_CRCI_CTL_MUX_SEL BIT(18) ++#define ADM_CRCI_CTL_RST BIT(17) ++ ++/* CI configuration */ ++#define ADM_CI_RANGE_END(x) (x << 24) ++#define ADM_CI_RANGE_START(x) (x << 16) ++#define ADM_CI_BURST_4_WORDS BIT(2) ++#define ADM_CI_BURST_8_WORDS BIT(3) ++ ++/* GP CTL */ ++#define ADM_GP_CTL_LP_EN BIT(12) ++#define ADM_GP_CTL_LP_CNT(x) (x << 8) ++ ++/* Command pointer list entry */ ++#define ADM_CPLE_LP BIT(31) ++#define ADM_CPLE_CMD_PTR_LIST BIT(29) ++ ++/* Command list entry */ ++#define ADM_CMD_LC BIT(31) ++#define ADM_CMD_DST_CRCI(n) (((n) & 0xf) << 7) ++#define ADM_CMD_SRC_CRCI(n) (((n) & 0xf) << 3) ++ ++#define ADM_CMD_TYPE_SINGLE 0x0 ++#define ADM_CMD_TYPE_BOX 0x3 ++ ++#define ADM_CRCI_MUX_SEL BIT(4) ++#define ADM_DESC_ALIGN 8 ++#define ADM_MAX_XFER (SZ_64K-1) ++#define ADM_MAX_ROWS (SZ_64K-1) ++#define ADM_MAX_CHANNELS 16 ++ ++struct adm_desc_hw_box { ++ u32 cmd; ++ u32 src_addr; ++ u32 dst_addr; ++ u32 row_len; ++ u32 num_rows; ++ u32 row_offset; ++}; ++ ++struct adm_desc_hw_single { ++ u32 cmd; ++ u32 src_addr; ++ u32 dst_addr; ++ u32 len; ++}; ++ ++struct adm_async_desc { ++ struct virt_dma_desc vd; ++ struct adm_device *adev; ++ ++ size_t length; ++ enum dma_transfer_direction dir; ++ dma_addr_t dma_addr; ++ size_t dma_len; ++ ++ void *cpl; ++ dma_addr_t cp_addr; ++ u32 crci; ++ u32 mux; ++ u32 blk_size; ++}; ++ ++struct adm_chan { ++ struct virt_dma_chan vc; ++ struct adm_device *adev; ++ ++ /* parsed from DT */ ++ u32 id; /* channel id */ ++ ++ struct adm_async_desc *curr_txd; ++ struct dma_slave_config slave; ++ struct list_head node; ++ ++ int error; ++ int initialized; ++}; ++ ++static inline struct adm_chan *to_adm_chan(struct dma_chan *common) ++{ ++ return container_of(common, struct adm_chan, vc.chan); ++} ++ ++struct adm_device { ++ void __iomem *regs; ++ struct device *dev; ++ struct dma_device common; ++ struct device_dma_parameters dma_parms; ++ struct adm_chan *channels; ++ ++ u32 ee; ++ ++ struct clk *core_clk; ++ struct clk *iface_clk; ++ ++ struct reset_control *clk_reset; ++ struct reset_control *c0_reset; ++ struct reset_control *c1_reset; ++ struct reset_control *c2_reset; ++ int irq; ++}; ++ ++/** ++ * adm_free_chan - Frees dma resources associated with the specific channel ++ * ++ * Free all allocated descriptors associated with this channel ++ * ++ */ ++static void adm_free_chan(struct dma_chan *chan) ++{ ++ /* free all queued descriptors */ ++ vchan_free_chan_resources(to_virt_chan(chan)); ++} ++ ++/** ++ * adm_get_blksize - Get block size from burst value ++ * ++ */ ++static int adm_get_blksize(unsigned int burst) ++{ ++ int ret; ++ ++ switch (burst) { ++ case 16: ++ case 32: ++ case 64: ++ case 128: ++ ret = ffs(burst>>4) - 1; ++ break; ++ case 192: ++ ret = 4; ++ break; ++ case 256: ++ ret = 5; ++ break; ++ default: ++ ret = -EINVAL; ++ break; ++ } ++ ++ return ret; ++} ++ ++/** ++ * adm_process_fc_descriptors - Process descriptors for flow controlled xfers ++ * ++ * @achan: ADM channel ++ * @desc: Descriptor memory pointer ++ * @sg: Scatterlist entry ++ * @crci: CRCI value ++ * @burst: Burst size of transaction ++ * @direction: DMA transfer direction ++ */ ++static void *adm_process_fc_descriptors(struct adm_chan *achan, ++ void *desc, struct scatterlist *sg, u32 crci, u32 burst, ++ enum dma_transfer_direction direction) ++{ ++ struct adm_desc_hw_box *box_desc = NULL; ++ struct adm_desc_hw_single *single_desc; ++ u32 remainder = sg_dma_len(sg); ++ u32 rows, row_offset, crci_cmd; ++ u32 mem_addr = sg_dma_address(sg); ++ u32 *incr_addr = &mem_addr; ++ u32 *src, *dst; ++ ++ if (direction == DMA_DEV_TO_MEM) { ++ crci_cmd = ADM_CMD_SRC_CRCI(crci); ++ row_offset = burst; ++ src = &achan->slave.src_addr; ++ dst = &mem_addr; ++ } else { ++ crci_cmd = ADM_CMD_DST_CRCI(crci); ++ row_offset = burst << 16; ++ src = &mem_addr; ++ dst = &achan->slave.dst_addr; ++ } ++ ++ while (remainder >= burst) { ++ box_desc = desc; ++ box_desc->cmd = ADM_CMD_TYPE_BOX | crci_cmd; ++ box_desc->row_offset = row_offset; ++ box_desc->src_addr = *src; ++ box_desc->dst_addr = *dst; ++ ++ rows = remainder / burst; ++ rows = min_t(u32, rows, ADM_MAX_ROWS); ++ box_desc->num_rows = rows << 16 | rows; ++ box_desc->row_len = burst << 16 | burst; ++ ++ *incr_addr += burst * rows; ++ remainder -= burst * rows; ++ desc += sizeof(*box_desc); ++ } ++ ++ /* if leftover bytes, do one single descriptor */ ++ if (remainder) { ++ single_desc = desc; ++ single_desc->cmd = ADM_CMD_TYPE_SINGLE | crci_cmd; ++ single_desc->len = remainder; ++ single_desc->src_addr = *src; ++ single_desc->dst_addr = *dst; ++ desc += sizeof(*single_desc); ++ ++ if (sg_is_last(sg)) ++ single_desc->cmd |= ADM_CMD_LC; ++ } else { ++ if (box_desc && sg_is_last(sg)) ++ box_desc->cmd |= ADM_CMD_LC; ++ } ++ ++ return desc; ++} ++ ++/** ++ * adm_process_non_fc_descriptors - Process descriptors for non-fc xfers ++ * ++ * @achan: ADM channel ++ * @desc: Descriptor memory pointer ++ * @sg: Scatterlist entry ++ * @direction: DMA transfer direction ++ */ ++static void *adm_process_non_fc_descriptors(struct adm_chan *achan, ++ void *desc, struct scatterlist *sg, ++ enum dma_transfer_direction direction) ++{ ++ struct adm_desc_hw_single *single_desc; ++ u32 remainder = sg_dma_len(sg); ++ u32 mem_addr = sg_dma_address(sg); ++ u32 *incr_addr = &mem_addr; ++ u32 *src, *dst; ++ ++ if (direction == DMA_DEV_TO_MEM) { ++ src = &achan->slave.src_addr; ++ dst = &mem_addr; ++ } else { ++ src = &mem_addr; ++ dst = &achan->slave.dst_addr; ++ } ++ ++ do { ++ single_desc = desc; ++ single_desc->cmd = ADM_CMD_TYPE_SINGLE; ++ single_desc->src_addr = *src; ++ single_desc->dst_addr = *dst; ++ single_desc->len = (remainder > ADM_MAX_XFER) ? ++ ADM_MAX_XFER : remainder; ++ ++ remainder -= single_desc->len; ++ *incr_addr += single_desc->len; ++ desc += sizeof(*single_desc); ++ } while (remainder); ++ ++ /* set last command if this is the end of the whole transaction */ ++ if (sg_is_last(sg)) ++ single_desc->cmd |= ADM_CMD_LC; ++ ++ return desc; ++} ++ ++/** ++ * adm_prep_slave_sg - Prep slave sg transaction ++ * ++ * @chan: dma channel ++ * @sgl: scatter gather list ++ * @sg_len: length of sg ++ * @direction: DMA transfer direction ++ * @flags: DMA flags ++ * @context: transfer context (unused) ++ */ ++static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan, ++ struct scatterlist *sgl, unsigned int sg_len, ++ enum dma_transfer_direction direction, unsigned long flags, ++ void *context) ++{ ++ struct adm_chan *achan = to_adm_chan(chan); ++ struct adm_device *adev = achan->adev; ++ struct adm_async_desc *async_desc; ++ struct scatterlist *sg; ++ dma_addr_t cple_addr; ++ u32 i, burst; ++ u32 single_count = 0, box_count = 0, crci = 0; ++ void *desc; ++ u32 *cple; ++ int blk_size = 0; ++ ++ if (!is_slave_direction(direction)) { ++ dev_err(adev->dev, "invalid dma direction\n"); ++ return NULL; ++ } ++ ++ /* ++ * get burst value from slave configuration ++ */ ++ burst = (direction == DMA_MEM_TO_DEV) ? ++ achan->slave.dst_maxburst : ++ achan->slave.src_maxburst; ++ ++ /* if using flow control, validate burst and crci values */ ++ if (achan->slave.device_fc) { ++ ++ blk_size = adm_get_blksize(burst); ++ if (blk_size < 0) { ++ dev_err(adev->dev, "invalid burst value: %d\n", ++ burst); ++ return ERR_PTR(-EINVAL); ++ } ++ ++ crci = achan->slave.slave_id & 0xf; ++ if (!crci || achan->slave.slave_id > 0x1f) { ++ dev_err(adev->dev, "invalid crci value\n"); ++ return ERR_PTR(-EINVAL); ++ } ++ } ++ ++ /* iterate through sgs and compute allocation size of structures */ ++ for_each_sg(sgl, sg, sg_len, i) { ++ if (achan->slave.device_fc) { ++ box_count += DIV_ROUND_UP(sg_dma_len(sg) / burst, ++ ADM_MAX_ROWS); ++ if (sg_dma_len(sg) % burst) ++ single_count++; ++ } else { ++ single_count += DIV_ROUND_UP(sg_dma_len(sg), ++ ADM_MAX_XFER); ++ } ++ } ++ ++ async_desc = kzalloc(sizeof(*async_desc), GFP_ATOMIC); ++ if (!async_desc) ++ return ERR_PTR(-ENOMEM); ++ ++ if (crci) ++ async_desc->mux = achan->slave.slave_id & ADM_CRCI_MUX_SEL ? ++ ADM_CRCI_CTL_MUX_SEL : 0; ++ async_desc->crci = crci; ++ async_desc->blk_size = blk_size; ++ async_desc->dma_len = single_count * sizeof(struct adm_desc_hw_single) + ++ box_count * sizeof(struct adm_desc_hw_box) + ++ sizeof(*cple) + 2 * ADM_DESC_ALIGN; ++ ++ async_desc->cpl = kzalloc(async_desc->dma_len, GFP_ATOMIC); ++ if (!async_desc->cpl) ++ goto free; ++ ++ async_desc->adev = adev; ++ ++ /* both command list entry and descriptors must be 8 byte aligned */ ++ cple = PTR_ALIGN(async_desc->cpl, ADM_DESC_ALIGN); ++ desc = PTR_ALIGN(cple + 1, ADM_DESC_ALIGN); ++ ++ for_each_sg(sgl, sg, sg_len, i) { ++ async_desc->length += sg_dma_len(sg); ++ ++ if (achan->slave.device_fc) ++ desc = adm_process_fc_descriptors(achan, desc, sg, crci, ++ burst, direction); ++ else ++ desc = adm_process_non_fc_descriptors(achan, desc, sg, ++ direction); ++ } ++ ++ async_desc->dma_addr = dma_map_single(adev->dev, async_desc->cpl, ++ async_desc->dma_len, ++ DMA_TO_DEVICE); ++ if (dma_mapping_error(adev->dev, async_desc->dma_addr)) ++ goto free; ++ ++ cple_addr = async_desc->dma_addr + ((void *)cple - async_desc->cpl); ++ ++ /* init cmd list */ ++ dma_sync_single_for_cpu(adev->dev, cple_addr, sizeof(*cple), ++ DMA_TO_DEVICE); ++ *cple = ADM_CPLE_LP; ++ *cple |= (async_desc->dma_addr + ADM_DESC_ALIGN) >> 3; ++ dma_sync_single_for_device(adev->dev, cple_addr, sizeof(*cple), ++ DMA_TO_DEVICE); ++ ++ return vchan_tx_prep(&achan->vc, &async_desc->vd, flags); ++ ++free: ++ kfree(async_desc); ++ return ERR_PTR(-ENOMEM); ++} ++ ++/** ++ * adm_terminate_all - terminate all transactions on a channel ++ * @achan: adm dma channel ++ * ++ * Dequeues and frees all transactions, aborts current transaction ++ * No callbacks are done ++ * ++ */ ++static int adm_terminate_all(struct dma_chan *chan) ++{ ++ struct adm_chan *achan = to_adm_chan(chan); ++ struct adm_device *adev = achan->adev; ++ unsigned long flags; ++ LIST_HEAD(head); ++ ++ spin_lock_irqsave(&achan->vc.lock, flags); ++ vchan_get_all_descriptors(&achan->vc, &head); ++ ++ /* send flush command to terminate current transaction */ ++ writel_relaxed(0x0, ++ adev->regs + ADM_CH_FLUSH_STATE0(achan->id, adev->ee)); ++ ++ spin_unlock_irqrestore(&achan->vc.lock, flags); ++ ++ vchan_dma_desc_free_list(&achan->vc, &head); ++ ++ return 0; ++} ++ ++static int adm_slave_config(struct dma_chan *chan, struct dma_slave_config *cfg) ++{ ++ struct adm_chan *achan = to_adm_chan(chan); ++ unsigned long flag; ++ ++ spin_lock_irqsave(&achan->vc.lock, flag); ++ memcpy(&achan->slave, cfg, sizeof(struct dma_slave_config)); ++ spin_unlock_irqrestore(&achan->vc.lock, flag); ++ ++ return 0; ++} ++ ++/** ++ * adm_start_dma - start next transaction ++ * @achan - ADM dma channel ++ */ ++static void adm_start_dma(struct adm_chan *achan) ++{ ++ struct virt_dma_desc *vd = vchan_next_desc(&achan->vc); ++ struct adm_device *adev = achan->adev; ++ struct adm_async_desc *async_desc; ++ ++ lockdep_assert_held(&achan->vc.lock); ++ ++ if (!vd) ++ return; ++ ++ list_del(&vd->node); ++ ++ /* write next command list out to the CMD FIFO */ ++ async_desc = container_of(vd, struct adm_async_desc, vd); ++ achan->curr_txd = async_desc; ++ ++ /* reset channel error */ ++ achan->error = 0; ++ ++ if (!achan->initialized) { ++ /* enable interrupts */ ++ writel(ADM_CH_CONF_SHADOW_EN | ++ ADM_CH_CONF_PERM_MPU_CONF | ++ ADM_CH_CONF_MPU_DISABLE | ++ ADM_CH_CONF_SEC_DOMAIN(adev->ee), ++ adev->regs + ADM_CH_CONF(achan->id)); ++ ++ writel(ADM_CH_RSLT_CONF_IRQ_EN | ADM_CH_RSLT_CONF_FLUSH_EN, ++ adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee)); ++ ++ achan->initialized = 1; ++ } ++ ++ /* set the crci block size if this transaction requires CRCI */ ++ if (async_desc->crci) { ++ writel(async_desc->mux | async_desc->blk_size, ++ adev->regs + ADM_CRCI_CTL(async_desc->crci, adev->ee)); ++ } ++ ++ /* make sure IRQ enable doesn't get reordered */ ++ wmb(); ++ ++ /* write next command list out to the CMD FIFO */ ++ writel(ALIGN(async_desc->dma_addr, ADM_DESC_ALIGN) >> 3, ++ adev->regs + ADM_CH_CMD_PTR(achan->id, adev->ee)); ++} ++ ++/** ++ * adm_dma_irq - irq handler for ADM controller ++ * @irq: IRQ of interrupt ++ * @data: callback data ++ * ++ * IRQ handler for the bam controller ++ */ ++static irqreturn_t adm_dma_irq(int irq, void *data) ++{ ++ struct adm_device *adev = data; ++ u32 srcs, i; ++ struct adm_async_desc *async_desc; ++ unsigned long flags; ++ ++ srcs = readl_relaxed(adev->regs + ++ ADM_SEC_DOMAIN_IRQ_STATUS(adev->ee)); ++ ++ for (i = 0; i < ADM_MAX_CHANNELS; i++) { ++ struct adm_chan *achan = &adev->channels[i]; ++ u32 status, result; ++ ++ if (srcs & BIT(i)) { ++ status = readl_relaxed(adev->regs + ++ ADM_CH_STATUS_SD(i, adev->ee)); ++ ++ /* if no result present, skip */ ++ if (!(status & ADM_CH_STATUS_VALID)) ++ continue; ++ ++ result = readl_relaxed(adev->regs + ++ ADM_CH_RSLT(i, adev->ee)); ++ ++ /* no valid results, skip */ ++ if (!(result & ADM_CH_RSLT_VALID)) ++ continue; ++ ++ /* flag error if transaction was flushed or failed */ ++ if (result & (ADM_CH_RSLT_ERR | ADM_CH_RSLT_FLUSH)) ++ achan->error = 1; ++ ++ spin_lock_irqsave(&achan->vc.lock, flags); ++ async_desc = achan->curr_txd; ++ ++ achan->curr_txd = NULL; ++ ++ if (async_desc) { ++ vchan_cookie_complete(&async_desc->vd); ++ ++ /* kick off next DMA */ ++ adm_start_dma(achan); ++ } ++ ++ spin_unlock_irqrestore(&achan->vc.lock, flags); ++ } ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++/** ++ * adm_tx_status - returns status of transaction ++ * @chan: dma channel ++ * @cookie: transaction cookie ++ * @txstate: DMA transaction state ++ * ++ * Return status of dma transaction ++ */ ++static enum dma_status adm_tx_status(struct dma_chan *chan, dma_cookie_t cookie, ++ struct dma_tx_state *txstate) ++{ ++ struct adm_chan *achan = to_adm_chan(chan); ++ struct virt_dma_desc *vd; ++ enum dma_status ret; ++ unsigned long flags; ++ size_t residue = 0; ++ ++ ret = dma_cookie_status(chan, cookie, txstate); ++ if (ret == DMA_COMPLETE || !txstate) ++ return ret; ++ ++ spin_lock_irqsave(&achan->vc.lock, flags); ++ ++ vd = vchan_find_desc(&achan->vc, cookie); ++ if (vd) ++ residue = container_of(vd, struct adm_async_desc, vd)->length; ++ ++ spin_unlock_irqrestore(&achan->vc.lock, flags); ++ ++ /* ++ * residue is either the full length if it is in the issued list, or 0 ++ * if it is in progress. We have no reliable way of determining ++ * anything inbetween ++ */ ++ dma_set_residue(txstate, residue); ++ ++ if (achan->error) ++ return DMA_ERROR; ++ ++ return ret; ++} ++ ++/** ++ * adm_issue_pending - starts pending transactions ++ * @chan: dma channel ++ * ++ * Issues all pending transactions and starts DMA ++ */ ++static void adm_issue_pending(struct dma_chan *chan) ++{ ++ struct adm_chan *achan = to_adm_chan(chan); ++ unsigned long flags; ++ ++ spin_lock_irqsave(&achan->vc.lock, flags); ++ ++ if (vchan_issue_pending(&achan->vc) && !achan->curr_txd) ++ adm_start_dma(achan); ++ spin_unlock_irqrestore(&achan->vc.lock, flags); ++} ++ ++/** ++ * adm_dma_free_desc - free descriptor memory ++ * @vd: virtual descriptor ++ * ++ */ ++static void adm_dma_free_desc(struct virt_dma_desc *vd) ++{ ++ struct adm_async_desc *async_desc = container_of(vd, ++ struct adm_async_desc, vd); ++ ++ dma_unmap_single(async_desc->adev->dev, async_desc->dma_addr, ++ async_desc->dma_len, DMA_TO_DEVICE); ++ kfree(async_desc->cpl); ++ kfree(async_desc); ++} ++ ++static void adm_channel_init(struct adm_device *adev, struct adm_chan *achan, ++ u32 index) ++{ ++ achan->id = index; ++ achan->adev = adev; ++ ++ vchan_init(&achan->vc, &adev->common); ++ achan->vc.desc_free = adm_dma_free_desc; ++} ++ ++static int adm_dma_probe(struct platform_device *pdev) ++{ ++ struct adm_device *adev; ++ struct resource *iores; ++ int ret; ++ u32 i; ++ ++ adev = devm_kzalloc(&pdev->dev, sizeof(*adev), GFP_KERNEL); ++ if (!adev) ++ return -ENOMEM; ++ ++ adev->dev = &pdev->dev; ++ ++ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ adev->regs = devm_ioremap_resource(&pdev->dev, iores); ++ if (IS_ERR(adev->regs)) ++ return PTR_ERR(adev->regs); ++ ++ adev->irq = platform_get_irq(pdev, 0); ++ if (adev->irq < 0) ++ return adev->irq; ++ ++ ret = of_property_read_u32(pdev->dev.of_node, "qcom,ee", &adev->ee); ++ if (ret) { ++ dev_err(adev->dev, "Execution environment unspecified\n"); ++ return ret; ++ } ++ ++ adev->core_clk = devm_clk_get(adev->dev, "core"); ++ if (IS_ERR(adev->core_clk)) ++ return PTR_ERR(adev->core_clk); ++ ++ ret = clk_prepare_enable(adev->core_clk); ++ if (ret) { ++ dev_err(adev->dev, "failed to prepare/enable core clock\n"); ++ return ret; ++ } ++ ++ adev->iface_clk = devm_clk_get(adev->dev, "iface"); ++ if (IS_ERR(adev->iface_clk)) { ++ ret = PTR_ERR(adev->iface_clk); ++ goto err_disable_core_clk; ++ } ++ ++ ret = clk_prepare_enable(adev->iface_clk); ++ if (ret) { ++ dev_err(adev->dev, "failed to prepare/enable iface clock\n"); ++ goto err_disable_core_clk; ++ } ++ ++ adev->clk_reset = devm_reset_control_get(&pdev->dev, "clk"); ++ if (IS_ERR(adev->clk_reset)) { ++ dev_err(adev->dev, "failed to get ADM0 reset\n"); ++ ret = PTR_ERR(adev->clk_reset); ++ goto err_disable_clks; ++ } ++ ++ adev->c0_reset = devm_reset_control_get(&pdev->dev, "c0"); ++ if (IS_ERR(adev->c0_reset)) { ++ dev_err(adev->dev, "failed to get ADM0 C0 reset\n"); ++ ret = PTR_ERR(adev->c0_reset); ++ goto err_disable_clks; ++ } ++ ++ adev->c1_reset = devm_reset_control_get(&pdev->dev, "c1"); ++ if (IS_ERR(adev->c1_reset)) { ++ dev_err(adev->dev, "failed to get ADM0 C1 reset\n"); ++ ret = PTR_ERR(adev->c1_reset); ++ goto err_disable_clks; ++ } ++ ++ adev->c2_reset = devm_reset_control_get(&pdev->dev, "c2"); ++ if (IS_ERR(adev->c2_reset)) { ++ dev_err(adev->dev, "failed to get ADM0 C2 reset\n"); ++ ret = PTR_ERR(adev->c2_reset); ++ goto err_disable_clks; ++ } ++ ++ reset_control_assert(adev->clk_reset); ++ reset_control_assert(adev->c0_reset); ++ reset_control_assert(adev->c1_reset); ++ reset_control_assert(adev->c2_reset); ++ ++ reset_control_deassert(adev->clk_reset); ++ reset_control_deassert(adev->c0_reset); ++ reset_control_deassert(adev->c1_reset); ++ reset_control_deassert(adev->c2_reset); ++ ++ adev->channels = devm_kcalloc(adev->dev, ADM_MAX_CHANNELS, ++ sizeof(*adev->channels), GFP_KERNEL); ++ ++ if (!adev->channels) { ++ ret = -ENOMEM; ++ goto err_disable_clks; ++ } ++ ++ /* allocate and initialize channels */ ++ INIT_LIST_HEAD(&adev->common.channels); ++ ++ for (i = 0; i < ADM_MAX_CHANNELS; i++) ++ adm_channel_init(adev, &adev->channels[i], i); ++ ++ /* reset CRCIs */ ++ for (i = 0; i < 16; i++) ++ writel(ADM_CRCI_CTL_RST, adev->regs + ++ ADM_CRCI_CTL(i, adev->ee)); ++ ++ /* configure client interfaces */ ++ writel(ADM_CI_RANGE_START(0x40) | ADM_CI_RANGE_END(0xb0) | ++ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(0)); ++ writel(ADM_CI_RANGE_START(0x2a) | ADM_CI_RANGE_END(0x2c) | ++ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(1)); ++ writel(ADM_CI_RANGE_START(0x12) | ADM_CI_RANGE_END(0x28) | ++ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(2)); ++ writel(ADM_GP_CTL_LP_EN | ADM_GP_CTL_LP_CNT(0xf), ++ adev->regs + ADM_GP_CTL); ++ ++ ret = devm_request_irq(adev->dev, adev->irq, adm_dma_irq, ++ 0, "adm_dma", adev); ++ if (ret) ++ goto err_disable_clks; ++ ++ platform_set_drvdata(pdev, adev); ++ ++ adev->common.dev = adev->dev; ++ adev->common.dev->dma_parms = &adev->dma_parms; ++ ++ /* set capabilities */ ++ dma_cap_zero(adev->common.cap_mask); ++ dma_cap_set(DMA_SLAVE, adev->common.cap_mask); ++ dma_cap_set(DMA_PRIVATE, adev->common.cap_mask); ++ ++ /* initialize dmaengine apis */ ++ adev->common.directions = BIT(DMA_DEV_TO_MEM | DMA_MEM_TO_DEV); ++ adev->common.residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR; ++ adev->common.src_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES; ++ adev->common.dst_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES; ++ adev->common.device_free_chan_resources = adm_free_chan; ++ adev->common.device_prep_slave_sg = adm_prep_slave_sg; ++ adev->common.device_issue_pending = adm_issue_pending; ++ adev->common.device_tx_status = adm_tx_status; ++ adev->common.device_terminate_all = adm_terminate_all; ++ adev->common.device_config = adm_slave_config; ++ ++ ret = dma_async_device_register(&adev->common); ++ if (ret) { ++ dev_err(adev->dev, "failed to register dma async device\n"); ++ goto err_disable_clks; ++ } ++ ++ ret = of_dma_controller_register(pdev->dev.of_node, ++ of_dma_xlate_by_chan_id, ++ &adev->common); ++ if (ret) ++ goto err_unregister_dma; ++ ++ return 0; ++ ++err_unregister_dma: ++ dma_async_device_unregister(&adev->common); ++err_disable_clks: ++ clk_disable_unprepare(adev->iface_clk); ++err_disable_core_clk: ++ clk_disable_unprepare(adev->core_clk); ++ ++ return ret; ++} ++ ++static int adm_dma_remove(struct platform_device *pdev) ++{ ++ struct adm_device *adev = platform_get_drvdata(pdev); ++ struct adm_chan *achan; ++ u32 i; ++ ++ of_dma_controller_free(pdev->dev.of_node); ++ dma_async_device_unregister(&adev->common); ++ ++ for (i = 0; i < ADM_MAX_CHANNELS; i++) { ++ achan = &adev->channels[i]; ++ ++ /* mask IRQs for this channel/EE pair */ ++ writel(0, adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee)); ++ ++ adm_terminate_all(&adev->channels[i].vc.chan); ++ } ++ ++ devm_free_irq(adev->dev, adev->irq, adev); ++ ++ clk_disable_unprepare(adev->core_clk); ++ clk_disable_unprepare(adev->iface_clk); ++ ++ return 0; ++} ++ ++static const struct of_device_id adm_of_match[] = { ++ { .compatible = "qcom,adm", }, ++ {} ++}; ++MODULE_DEVICE_TABLE(of, adm_of_match); ++ ++static struct platform_driver adm_dma_driver = { ++ .probe = adm_dma_probe, ++ .remove = adm_dma_remove, ++ .driver = { ++ .name = "adm-dma-engine", ++ .of_match_table = adm_of_match, ++ }, ++}; ++ ++module_platform_driver(adm_dma_driver); ++ ++MODULE_AUTHOR("Andy Gross "); ++MODULE_DESCRIPTION("QCOM ADM DMA engine driver"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/ipq806x/patches-5.10/0030-clk-Disable-i2c-device-on-gsbi4.patch b/target/linux/ipq806x/patches-5.10/0030-clk-Disable-i2c-device-on-gsbi4.patch new file mode 100644 index 0000000000..a5fb714e6c --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/0030-clk-Disable-i2c-device-on-gsbi4.patch @@ -0,0 +1,40 @@ +From 0c974b87829e007dc4fae94e20d488204e20e662 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 9 Mar 2017 08:16:10 +0100 +Subject: [PATCH 30/69] clk: Disable i2c device on gsbi4 + +This patch was not annotated and comes from the v4.4 tree. + +Signed-off-by: John Crispin +--- + drivers/clk/qcom/gcc-ipq806x.c | 5 +++-- + 1 file changed, 3 insertions(+), 2 deletions(-) + +--- a/drivers/clk/qcom/gcc-ipq806x.c ++++ b/drivers/clk/qcom/gcc-ipq806x.c +@@ -365,7 +365,7 @@ static struct clk_rcg gsbi1_uart_src = { + .parent_names = gcc_pxo_pll8, + .num_parents = 2, + .ops = &clk_rcg_ops, +- .flags = CLK_SET_PARENT_GATE, ++ .flags = CLK_SET_PARENT_GATE | CLK_IGNORE_UNUSED, + }, + }, + }; +@@ -383,7 +383,7 @@ static struct clk_branch gsbi1_uart_clk + }, + .num_parents = 1, + .ops = &clk_branch_ops, +- .flags = CLK_SET_RATE_PARENT, ++ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + }, + }, + }; +@@ -961,6 +961,7 @@ static struct clk_branch gsbi1_h_clk = { + .hw.init = &(struct clk_init_data){ + .name = "gsbi1_h_clk", + .ops = &clk_branch_ops, ++ .flags = CLK_IGNORE_UNUSED, + }, + }, + }; diff --git a/target/linux/ipq806x/patches-5.10/0031-mtd-add-SMEM-parser-for-QCOM-platforms.patch b/target/linux/ipq806x/patches-5.10/0031-mtd-add-SMEM-parser-for-QCOM-platforms.patch new file mode 100644 index 0000000000..6aa404c8c5 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/0031-mtd-add-SMEM-parser-for-QCOM-platforms.patch @@ -0,0 +1,282 @@ +From d8eeb4de90e968ba32d956728c866f20752cf2c3 Mon Sep 17 00:00:00 2001 +From: Mathieu Olivari +Date: Thu, 9 Mar 2017 08:18:08 +0100 +Subject: [PATCH 31/69] mtd: add SMEM parser for QCOM platforms + +On QCOM platforms using MTD devices storage (such as IPQ806x), SMEM is +used to store partition layout. This new parser can now be used to read +SMEM and use it to register an MTD layout according to its content. + +Signed-off-by: Mathieu Olivari +Signed-off-by: Ram Chandra Jangir +--- + drivers/mtd/parsers/Kconfig | 7 ++ + drivers/mtd/parsers/Makefile | 1 + + drivers/mtd/parsers/qcom_smem_part.c | 228 +++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 236 insertions(+) + create mode 100644 drivers/mtd/parsers/qcom_smem_part.c + +--- a/drivers/mtd/parsers/Kconfig ++++ b/drivers/mtd/parsers/Kconfig +@@ -119,6 +119,13 @@ config MTD_PARSER_TRX + This driver will parse TRX header and report at least two partitions: + kernel and rootfs. + ++config MTD_QCOM_SMEM_PARTS ++ tristate "QCOM SMEM partitioning support" ++ depends on QCOM_SMEM ++ help ++ This provides partitions parser for QCOM devices using SMEM ++ such as IPQ806x. ++ + config MTD_SHARPSL_PARTS + tristate "Sharp SL Series NAND flash partition parser" + depends on MTD_NAND_SHARPSL || MTD_NAND_TMIO || COMPILE_TEST +--- a/drivers/mtd/parsers/Makefile ++++ b/drivers/mtd/parsers/Makefile +@@ -8,6 +8,7 @@ obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o + obj-$(CONFIG_MTD_PARSER_IMAGETAG) += parser_imagetag.o + obj-$(CONFIG_MTD_AFS_PARTS) += afs.o + obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o ++obj-$(CONFIG_MTD_QCOM_SMEM_PARTS) += qcom_smem_part.o + obj-$(CONFIG_MTD_SHARPSL_PARTS) += sharpslpart.o + obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o + obj-$(CONFIG_MTD_ROUTERBOOT_PARTS) += routerbootpart.o +--- /dev/null ++++ b/drivers/mtd/parsers/qcom_smem_part.c +@@ -0,0 +1,235 @@ ++/* ++ * Copyright (c) 2015, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include ++ ++/* Processor/host identifier for the application processor */ ++#define SMEM_HOST_APPS 0 ++ ++/* SMEM items index */ ++#define SMEM_AARM_PARTITION_TABLE 9 ++#define SMEM_BOOT_FLASH_TYPE 421 ++#define SMEM_BOOT_FLASH_BLOCK_SIZE 424 ++ ++/* SMEM Flash types */ ++#define SMEM_FLASH_NAND 2 ++#define SMEM_FLASH_SPI 6 ++ ++#define SMEM_PART_NAME_SZ 16 ++#define SMEM_PARTS_MAX 32 ++ ++struct smem_partition { ++ char name[SMEM_PART_NAME_SZ]; ++ __le32 start; ++ __le32 size; ++ __le32 attr; ++}; ++ ++struct smem_partition_table { ++ u8 magic[8]; ++ __le32 version; ++ __le32 len; ++ struct smem_partition parts[SMEM_PARTS_MAX]; ++}; ++ ++/* SMEM Magic values in partition table */ ++static const u8 SMEM_PTABLE_MAGIC[] = { ++ 0xaa, 0x73, 0xee, 0x55, ++ 0xdb, 0xbd, 0x5e, 0xe3, ++}; ++ ++static int qcom_smem_get_flash_blksz(u64 **smem_blksz) ++{ ++ size_t size; ++ ++ *smem_blksz = qcom_smem_get(SMEM_HOST_APPS, SMEM_BOOT_FLASH_BLOCK_SIZE, ++ &size); ++ ++ if (IS_ERR(*smem_blksz)) { ++ pr_err("Unable to read flash blksz from SMEM\n"); ++ return -ENOENT; ++ } ++ ++ if (size != sizeof(**smem_blksz)) { ++ pr_err("Invalid flash blksz size in SMEM\n"); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static int qcom_smem_get_flash_type(u64 **smem_flash_type) ++{ ++ size_t size; ++ ++ *smem_flash_type = qcom_smem_get(SMEM_HOST_APPS, SMEM_BOOT_FLASH_TYPE, ++ &size); ++ ++ if (IS_ERR(*smem_flash_type)) { ++ pr_err("Unable to read flash type from SMEM\n"); ++ return -ENOENT; ++ } ++ ++ if (size != sizeof(**smem_flash_type)) { ++ pr_err("Invalid flash type size in SMEM\n"); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static int qcom_smem_get_flash_partitions(struct smem_partition_table **pparts) ++{ ++ size_t size; ++ ++ *pparts = qcom_smem_get(SMEM_HOST_APPS, SMEM_AARM_PARTITION_TABLE, ++ &size); ++ ++ if (IS_ERR(*pparts)) { ++ pr_err("Unable to read partition table from SMEM\n"); ++ return -ENOENT; ++ } ++ ++ return 0; ++} ++ ++static int of_dev_node_match(struct device *dev, const void *data) ++{ ++ return dev->of_node == data; ++} ++ ++static bool is_spi_device(struct device_node *np) ++{ ++ struct device *dev; ++ ++ dev = bus_find_device(&spi_bus_type, NULL, np, of_dev_node_match); ++ if (!dev) ++ return false; ++ ++ put_device(dev); ++ return true; ++} ++ ++static int parse_qcom_smem_partitions(struct mtd_info *master, ++ const struct mtd_partition **pparts, ++ struct mtd_part_parser_data *data) ++{ ++ struct smem_partition_table *smem_parts; ++ u64 *smem_flash_type, *smem_blksz; ++ struct mtd_partition *mtd_parts; ++ struct device_node *of_node = master->dev.of_node; ++ int i, ret; ++ ++ /* ++ * SMEM will only store the partition table of the boot device. ++ * If this is not the boot device, do not return any partition. ++ */ ++ ret = qcom_smem_get_flash_type(&smem_flash_type); ++ if (ret < 0) ++ return ret; ++ ++ if ((*smem_flash_type == SMEM_FLASH_NAND && !mtd_type_is_nand(master)) ++ || (*smem_flash_type == SMEM_FLASH_SPI && !is_spi_device(of_node))) ++ return 0; ++ ++ /* ++ * Just for sanity purpose, make sure the block size in SMEM matches the ++ * block size of the MTD device ++ */ ++ ret = qcom_smem_get_flash_blksz(&smem_blksz); ++ if (ret < 0) ++ return ret; ++ ++ if (*smem_blksz != master->erasesize) { ++ pr_err("SMEM block size differs from MTD block size\n"); ++ return -EINVAL; ++ } ++ ++ /* Get partition pointer from SMEM */ ++ ret = qcom_smem_get_flash_partitions(&smem_parts); ++ if (ret < 0) ++ return ret; ++ ++ if (memcmp(SMEM_PTABLE_MAGIC, smem_parts->magic, ++ sizeof(SMEM_PTABLE_MAGIC))) { ++ pr_err("SMEM partition magic invalid\n"); ++ return -EINVAL; ++ } ++ ++ /* Allocate and populate the mtd structures */ ++ mtd_parts = kcalloc(le32_to_cpu(smem_parts->len), sizeof(*mtd_parts), ++ GFP_KERNEL); ++ if (!mtd_parts) ++ return -ENOMEM; ++ ++ for (i = 0; i < smem_parts->len; i++) { ++ struct smem_partition *s_part = &smem_parts->parts[i]; ++ struct mtd_partition *m_part = &mtd_parts[i]; ++ ++ m_part->name = s_part->name; ++ m_part->size = le32_to_cpu(s_part->size) * (*smem_blksz); ++ m_part->offset = le32_to_cpu(s_part->start) * (*smem_blksz); ++ ++ /* ++ * The last SMEM partition may have its size marked as ++ * something like 0xffffffff, which means "until the end of the ++ * flash device". In this case, truncate it. ++ */ ++ if (m_part->offset + m_part->size > master->size) ++ m_part->size = master->size - m_part->offset; ++ } ++ ++ *pparts = mtd_parts; ++ ++ return smem_parts->len; ++} ++ ++static const struct of_device_id qcom_smem_of_match_table[] = { ++ { .compatible = "qcom,smem" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, qcom_smem_of_match_table); ++ ++static struct mtd_part_parser qcom_smem_parser = { ++ .owner = THIS_MODULE, ++ .parse_fn = parse_qcom_smem_partitions, ++ .name = "qcom-smem", ++ .of_match_table = qcom_smem_of_match_table, ++}; ++ ++static int __init qcom_smem_parser_init(void) ++{ ++ register_mtd_parser(&qcom_smem_parser); ++ return 0; ++} ++ ++static void __exit qcom_smem_parser_exit(void) ++{ ++ deregister_mtd_parser(&qcom_smem_parser); ++} ++ ++module_init(qcom_smem_parser_init); ++module_exit(qcom_smem_parser_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Mathieu Olivari "); ++MODULE_DESCRIPTION("Parsing code for SMEM based partition tables"); diff --git a/target/linux/ipq806x/patches-5.10/0033-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch b/target/linux/ipq806x/patches-5.10/0033-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch new file mode 100644 index 0000000000..a12aa721e2 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/0033-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch @@ -0,0 +1,29 @@ +From 48051ece78136e4235a2415a52797db56f8a4478 Mon Sep 17 00:00:00 2001 +From: Mathieu Olivari +Date: Tue, 21 Apr 2015 19:09:07 -0700 +Subject: [PATCH 33/69] ARM: qcom: automatically select PCI_DOMAINS if PCI is + enabled + +If multiple PCIe devices are present in the system, the kernel will +panic at boot time when trying to scan the PCI buses. This happens on +IPQ806x based platforms, which has 3 PCIe ports. + +Enabling this option allows the kernel to assign the pci-domains +according to the device-tree content. This allows multiple PCIe +controllers to coexist in the system. + +Signed-off-by: Mathieu Olivari +--- + arch/arm/mach-qcom/Kconfig | 1 + + 1 file changed, 1 insertion(+) + +--- a/arch/arm/mach-qcom/Kconfig ++++ b/arch/arm/mach-qcom/Kconfig +@@ -7,6 +7,7 @@ menuconfig ARCH_QCOM + select ARM_AMBA + select PINCTRL + select QCOM_SCM if SMP ++ select PCI_DOMAINS if PCI + help + Support for Qualcomm's devicetree based systems. + diff --git a/target/linux/ipq806x/patches-5.10/0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime.patch b/target/linux/ipq806x/patches-5.10/0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime.patch new file mode 100644 index 0000000000..9efbd583b4 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime.patch @@ -0,0 +1,153 @@ +From: Sylwester Nawrocki +To: krzk@kernel.org, vireshk@kernel.org, robh+dt@kernel.org +Cc: sboyd@kernel.org, roger.lu@mediatek.com, + linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, + linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org, + b.zolnierkie@samsung.com, m.szyprowski@samsung.com, + Stephen Boyd , + Sylwester Nawrocki +Subject: [PATCH v5 1/4] PM / OPP: Support adjusting OPP voltages at runtime +Date: Wed, 16 Oct 2019 16:57:53 +0200 +Message-ID: <20191016145756.16004-2-s.nawrocki@samsung.com> (raw) +In-Reply-To: <20191016145756.16004-1-s.nawrocki@samsung.com> + +From: Stephen Boyd + +On some SoCs the Adaptive Voltage Scaling (AVS) technique is +employed to optimize the operating voltage of a device. At a +given frequency, the hardware monitors dynamic factors and either +makes a suggestion for how much to adjust a voltage for the +current frequency, or it automatically adjusts the voltage +without software intervention. Add an API to the OPP library for +the former case, so that AVS type devices can update the voltages +for an OPP when the hardware determines the voltage should +change. The assumption is that drivers like CPUfreq or devfreq +will register for the OPP notifiers and adjust the voltage +according to suggestions that AVS makes. + +This patch is derived from [1] submitted by Stephen. +[1] https://lore.kernel.org/patchwork/patch/599279/ + +Signed-off-by: Stephen Boyd +Signed-off-by: Roger Lu +[s.nawrocki@samsung.com: added handling of OPP min/max voltage] +Signed-off-by: Sylwester Nawrocki +--- + drivers/opp/core.c | 69 ++++++++++++++++++++++++++++++++++++++++++ + include/linux/pm_opp.h | 13 ++++++++ + 2 files changed, 82 insertions(+) + +--- a/drivers/opp/core.c ++++ b/drivers/opp/core.c +@@ -2102,6 +2102,75 @@ put_table: + } + + /** ++ * dev_pm_opp_adjust_voltage() - helper to change the voltage of an OPP ++ * @dev: device for which we do this operation ++ * @freq: OPP frequency to adjust voltage of ++ * @u_volt: new OPP target voltage ++ * @u_volt_min: new OPP min voltage ++ * @u_volt_max: new OPP max voltage ++ * ++ * Return: -EINVAL for bad pointers, -ENOMEM if no memory available for the ++ * copy operation, returns 0 if no modifcation was done OR modification was ++ * successful. ++ */ ++int dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq, ++ unsigned long u_volt, unsigned long u_volt_min, ++ unsigned long u_volt_max) ++ ++{ ++ struct opp_table *opp_table; ++ struct dev_pm_opp *tmp_opp, *opp = ERR_PTR(-ENODEV); ++ int r = 0; ++ ++ /* Find the opp_table */ ++ opp_table = _find_opp_table(dev); ++ if (IS_ERR(opp_table)) { ++ r = PTR_ERR(opp_table); ++ dev_warn(dev, "%s: Device OPP not found (%d)\n", __func__, r); ++ return r; ++ } ++ ++ mutex_lock(&opp_table->lock); ++ ++ /* Do we have the frequency? */ ++ list_for_each_entry(tmp_opp, &opp_table->opp_list, node) { ++ if (tmp_opp->rate == freq) { ++ opp = tmp_opp; ++ break; ++ } ++ } ++ ++ if (IS_ERR(opp)) { ++ r = PTR_ERR(opp); ++ goto adjust_unlock; ++ } ++ ++ /* Is update really needed? */ ++ if (opp->supplies->u_volt == u_volt) ++ goto adjust_unlock; ++ ++ opp->supplies->u_volt = u_volt; ++ opp->supplies->u_volt_min = u_volt_min; ++ opp->supplies->u_volt_max = u_volt_max; ++ ++ dev_pm_opp_get(opp); ++ mutex_unlock(&opp_table->lock); ++ ++ /* Notify the voltage change of the OPP */ ++ blocking_notifier_call_chain(&opp_table->head, OPP_EVENT_ADJUST_VOLTAGE, ++ opp); ++ ++ dev_pm_opp_put(opp); ++ goto adjust_put_table; ++ ++adjust_unlock: ++ mutex_unlock(&opp_table->lock); ++adjust_put_table: ++ dev_pm_opp_put_opp_table(opp_table); ++ return r; ++} ++ ++/** + * dev_pm_opp_enable() - Enable a specific OPP + * @dev: device for which we do this operation + * @freq: OPP frequency to enable +--- a/include/linux/pm_opp.h ++++ b/include/linux/pm_opp.h +@@ -22,6 +22,7 @@ struct opp_table; + + enum dev_pm_opp_event { + OPP_EVENT_ADD, OPP_EVENT_REMOVE, OPP_EVENT_ENABLE, OPP_EVENT_DISABLE, ++ OPP_EVENT_ADJUST_VOLTAGE, + }; + + /** +@@ -113,6 +114,10 @@ int dev_pm_opp_add(struct device *dev, u + void dev_pm_opp_remove(struct device *dev, unsigned long freq); + void dev_pm_opp_remove_all_dynamic(struct device *dev); + ++int dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq, ++ unsigned long u_volt, unsigned long u_volt_min, ++ unsigned long u_volt_max); ++ + int dev_pm_opp_enable(struct device *dev, unsigned long freq); + + int dev_pm_opp_disable(struct device *dev, unsigned long freq); +@@ -242,6 +247,14 @@ static inline void dev_pm_opp_remove_all + { + } + ++static inline int ++dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq, ++ unsigned long u_volt, unsigned long u_volt_min, ++ unsigned long u_volt_max) ++{ ++ return 0; ++} ++ + static inline int dev_pm_opp_enable(struct device *dev, unsigned long freq) + { + return 0; diff --git a/target/linux/ipq806x/patches-5.10/0051-PM-OPP-Add-a-helper-to-get-an-opp-regulator-for-devi.patch b/target/linux/ipq806x/patches-5.10/0051-PM-OPP-Add-a-helper-to-get-an-opp-regulator-for-devi.patch new file mode 100644 index 0000000000..35fe45fca7 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/0051-PM-OPP-Add-a-helper-to-get-an-opp-regulator-for-devi.patch @@ -0,0 +1,52 @@ +From d06ca5e7a3cf726f5be5ffd96e93ccd798b8c09a Mon Sep 17 00:00:00 2001 +From: Georgi Djakov +Date: Thu, 12 May 2016 14:41:33 +0300 +Subject: [PATCH 51/69] PM / OPP: Add a helper to get an opp regulator for + device + +Signed-off-by: Georgi Djakov +--- + drivers/opp/core.c | 21 +++++++++++++++++++++ + include/linux/pm_opp.h | 1 + + 2 files changed, 22 insertions(+) + +--- a/drivers/opp/core.c ++++ b/drivers/opp/core.c +@@ -127,6 +127,27 @@ unsigned long dev_pm_opp_get_freq(struct + } + EXPORT_SYMBOL_GPL(dev_pm_opp_get_freq); + ++struct regulator *dev_pm_opp_get_regulator(struct device *dev) ++{ ++ struct opp_table *opp_table; ++ struct regulator *reg; ++ ++ rcu_read_lock(); ++ ++ opp_table = _find_opp_table(dev); ++ if (IS_ERR(opp_table)) { ++ rcu_read_unlock(); ++ return ERR_CAST(opp_table); ++ } ++ ++ reg = opp_table->regulators[0]; ++ ++ rcu_read_unlock(); ++ ++ return reg; ++} ++EXPORT_SYMBOL_GPL(dev_pm_opp_get_regulator); ++ + /** + * dev_pm_opp_get_level() - Gets the level corresponding to an available opp + * @opp: opp for which level value has to be returned for +--- a/include/linux/pm_opp.h ++++ b/include/linux/pm_opp.h +@@ -83,6 +83,7 @@ void dev_pm_opp_put_opp_table(struct opp + unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp); + + unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp); ++struct regulator *dev_pm_opp_get_regulator(struct device *dev); + + unsigned int dev_pm_opp_get_level(struct dev_pm_opp *opp); + diff --git a/target/linux/ipq806x/patches-5.10/0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t.patch b/target/linux/ipq806x/patches-5.10/0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t.patch new file mode 100644 index 0000000000..8498a0b6df --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t.patch @@ -0,0 +1,47 @@ +From 4533c285c2aedce6d4434d7b877066de3b1ecb33 Mon Sep 17 00:00:00 2001 +From: Georgi Djakov +Date: Thu, 25 Aug 2016 18:43:35 +0300 +Subject: [PATCH 52/69] PM / OPP: Update the voltage tolerance when adjusting + the OPP + +When the voltage is adjusted, the voltage tolerance is not updated. +This can lead to situations where the voltage min value is greater +than the voltage max value. The final result is triggering a BUG() +in the regulator core. +Fix this by updating the voltage tolerance values too. + +Signed-off-by: Georgi Djakov +--- + drivers/opp/core.c | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/drivers/opp/core.c ++++ b/drivers/opp/core.c +@@ -2142,6 +2142,7 @@ int dev_pm_opp_adjust_voltage(struct dev + struct opp_table *opp_table; + struct dev_pm_opp *tmp_opp, *opp = ERR_PTR(-ENODEV); + int r = 0; ++ unsigned long tol; + + /* Find the opp_table */ + opp_table = _find_opp_table(dev); +@@ -2171,8 +2172,17 @@ int dev_pm_opp_adjust_voltage(struct dev + goto adjust_unlock; + + opp->supplies->u_volt = u_volt; +- opp->supplies->u_volt_min = u_volt_min; +- opp->supplies->u_volt_max = u_volt_max; ++ ++ tol = u_volt * opp_table->voltage_tolerance_v1 / 100; ++ if ( u_volt_min == u_volt ) ++ opp->supplies->u_volt_min = u_volt - tol; ++ else ++ opp->supplies->u_volt_min = u_volt_min; ++ ++ if ( u_volt_max == u_volt ) ++ opp->supplies->u_volt_max = u_volt + tol; ++ else ++ opp->supplies->u_volt_max = u_volt_max; + + dev_pm_opp_get(opp); + mutex_unlock(&opp_table->lock); diff --git a/target/linux/ipq806x/patches-5.10/0054-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch b/target/linux/ipq806x/patches-5.10/0054-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch new file mode 100644 index 0000000000..2e9c101d94 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/0054-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch @@ -0,0 +1,118 @@ +From 10577f74c35bd395951d1b2382c8d821089b5745 Mon Sep 17 00:00:00 2001 +From: Stephen Boyd +Date: Fri, 18 Sep 2015 17:52:08 -0700 +Subject: [PATCH 54/69] cpufreq-dt: Handle OPP voltage adjust events + +On some SoCs the Adaptive Voltage Scaling (AVS) technique is +employed to optimize the operating voltage of a device. At a +given frequency, the hardware monitors dynamic factors and either +makes a suggestion for how much to adjust a voltage for the +current frequency, or it automatically adjusts the voltage +without software intervention. + +In the former case, an AVS driver will call +dev_pm_opp_modify_voltage() and update the voltage for the +particular OPP the CPUs are using. Add an OPP notifier to +cpufreq-dt so that we can adjust the voltage of the CPU when AVS +updates the OPP. + +Signed-off-by: Stephen Boyd +Acked-by: Viresh Kumar +Signed-off-by: Georgi Djakov +--- + drivers/cpufreq/cpufreq-dt.c | 68 ++++++++++++++++++++++++++++++++++++++++++-- + 1 file changed, 65 insertions(+), 3 deletions(-) + +--- a/drivers/cpufreq/cpufreq-dt.c ++++ b/drivers/cpufreq/cpufreq-dt.c +@@ -27,6 +27,9 @@ struct private_data { + struct opp_table *opp_table; + struct device *cpu_dev; + const char *reg_name; ++ struct notifier_block opp_nb; ++ struct mutex lock; ++ unsigned long opp_freq; + bool have_static_opps; + }; + +@@ -42,12 +45,15 @@ static int set_target(struct cpufreq_pol + unsigned long freq = policy->freq_table[index].frequency; + int ret; + ++ mutex_lock(&priv->lock); + ret = dev_pm_opp_set_rate(priv->cpu_dev, freq * 1000); + + if (!ret) { ++ priv->opp_freq = freq * 1000; + arch_set_freq_scale(policy->related_cpus, freq, + policy->cpuinfo.max_freq); + } ++ mutex_unlock(&priv->lock); + + return ret; + } +@@ -90,6 +96,39 @@ node_put: + return name; + } + ++static int opp_notifier(struct notifier_block *nb, unsigned long event, ++ void *data) ++{ ++ struct dev_pm_opp *opp = data; ++ struct private_data *priv = container_of(nb, struct private_data, ++ opp_nb); ++ struct device *cpu_dev = priv->cpu_dev; ++ struct regulator *cpu_reg; ++ unsigned long volt, freq; ++ int ret = 0; ++ ++ if (event == OPP_EVENT_ADJUST_VOLTAGE) { ++ cpu_reg = dev_pm_opp_get_regulator(cpu_dev); ++ if (IS_ERR(cpu_reg)) { ++ ret = PTR_ERR(cpu_reg); ++ goto out; ++ } ++ volt = dev_pm_opp_get_voltage(opp); ++ freq = dev_pm_opp_get_freq(opp); ++ ++ mutex_lock(&priv->lock); ++ if (freq == priv->opp_freq) { ++ ret = regulator_set_voltage_triplet(cpu_reg, volt, volt, volt); ++ } ++ mutex_unlock(&priv->lock); ++ if (ret) ++ dev_err(cpu_dev, "failed to scale voltage: %d\n", ret); ++ } ++ ++out: ++ return notifier_from_errno(ret); ++} ++ + static int resources_available(void) + { + struct device *cpu_dev; +@@ -246,10 +285,14 @@ static int cpufreq_init(struct cpufreq_p + __func__, ret); + } + ++ mutex_init(&priv->lock); ++ priv->opp_nb.notifier_call = opp_notifier; ++ dev_pm_opp_register_notifier(cpu_dev, &priv->opp_nb); ++ + ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); + if (ret) { + dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); +- goto out_free_opp; ++ goto out_unregister_nb; + } + + priv->cpu_dev = cpu_dev; +@@ -281,6 +324,8 @@ static int cpufreq_init(struct cpufreq_p + + out_free_cpufreq_table: + dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table); ++out_unregister_nb: ++ dev_pm_opp_unregister_notifier(cpu_dev, &priv->opp_nb); + out_free_opp: + if (priv->have_static_opps) + dev_pm_opp_of_cpumask_remove_table(policy->cpus); diff --git a/target/linux/ipq806x/patches-5.10/0055-cpufreq-dt-Add-L2-frequency-scaling-support.patch b/target/linux/ipq806x/patches-5.10/0055-cpufreq-dt-Add-L2-frequency-scaling-support.patch new file mode 100644 index 0000000000..910c2b1722 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/0055-cpufreq-dt-Add-L2-frequency-scaling-support.patch @@ -0,0 +1,199 @@ +--- a/drivers/cpufreq/cpufreq-dt.c ++++ b/drivers/cpufreq/cpufreq-dt.c +@@ -39,20 +39,85 @@ static struct freq_attr *cpufreq_dt_attr + NULL, + }; + ++struct shared_data { ++ unsigned long *curr_freq_table; ++ unsigned long curr_l2_freq; ++ unsigned long curr_l2_volt; ++}; ++ ++static struct shared_data *cpus_shared_data; ++ + static int set_target(struct cpufreq_policy *policy, unsigned int index) + { + struct private_data *priv = policy->driver_data; + unsigned long freq = policy->freq_table[index].frequency; ++ struct clk *l2_clk = policy->l2_clk; ++ struct regulator *l2_regulator = policy->l2_regulator; ++ unsigned long l2_freq, target_l2_freq; ++ unsigned long l2_vol, target_l2_volt; ++ unsigned long target_freq; + int ret; + + mutex_lock(&priv->lock); + ret = dev_pm_opp_set_rate(priv->cpu_dev, freq * 1000); + + if (!ret) { ++ if (policy->l2_rate_set) { ++ int cpu, l2_index, tol = 0; ++ target_freq = freq * 1000; ++ ++ cpus_shared_data->curr_freq_table[policy->cpu] = target_freq; ++ for_each_present_cpu(cpu) ++ if (cpu != policy->cpu) ++ target_freq = max(target_freq, cpus_shared_data->curr_freq_table[cpu]); ++ ++ for (l2_index = 2; l2_index > 0; l2_index--) ++ if (target_freq >= policy->l2_cpufreq[l2_index]) ++ break; ++ ++ l2_freq = cpus_shared_data->curr_l2_freq; ++ target_l2_freq = policy->l2_rate[l2_index]; ++ ++ if (l2_freq != target_l2_freq) { ++ ++ /* ++ * Set to idle bin if switching from normal to high bin ++ * or vice versa ++ */ ++ if ( (l2_index == 2 && l2_freq == policy->l2_rate[1]) || ++ (l2_index == 1 && l2_freq == policy->l2_rate[2]) ) { ++ ret = clk_set_rate(l2_clk, policy->l2_rate[0]); ++ if (ret) ++ goto exit; ++ } ++ ++ /* scale l2 with the core */ ++ ret = clk_set_rate(l2_clk, target_l2_freq); ++ if (ret) ++ goto exit; ++ cpus_shared_data->curr_l2_freq = target_l2_freq; ++ ++ if (policy->l2_volt_set) { ++ ++ l2_vol = cpus_shared_data->curr_l2_volt; ++ target_l2_volt = policy->l2_volt[l2_index]; ++ ++ if (l2_vol != target_l2_volt) { ++ tol = target_l2_volt * policy->l2_volt_tol / 100; ++ ret = regulator_set_voltage_tol(l2_regulator,target_l2_volt,tol); ++ if (ret) ++ goto exit; ++ cpus_shared_data->curr_l2_volt = target_l2_volt; ++ } ++ } ++ } ++ } + priv->opp_freq = freq * 1000; + arch_set_freq_scale(policy->related_cpus, freq, + policy->cpuinfo.max_freq); + } ++ ++exit: + mutex_unlock(&priv->lock); + + return ret; +@@ -195,6 +260,9 @@ static int cpufreq_init(struct cpufreq_p + bool fallback = false; + const char *name; + int ret; ++ struct device_node *np, *l2_np; ++ struct clk *l2_clk = NULL; ++ struct regulator *l2_regulator = NULL; + + cpu_dev = get_cpu_device(policy->cpu); + if (!cpu_dev) { +@@ -302,6 +370,57 @@ static int cpufreq_init(struct cpufreq_p + + policy->suspend_freq = dev_pm_opp_get_suspend_opp_freq(cpu_dev) / 1000; + ++ policy->l2_rate_set = false; ++ policy->l2_volt_set = false; ++ ++ l2_clk = clk_get(cpu_dev, "l2"); ++ if (!IS_ERR(l2_clk)) ++ policy->l2_clk = l2_clk; ++ ++ l2_np = of_find_node_by_name(NULL, "qcom,l2"); ++ if (l2_np) { ++ struct device_node *vdd; ++ np = of_node_get(priv->cpu_dev->of_node); ++ ++ if (np) ++ of_property_read_u32(np, "voltage-tolerance", &policy->l2_volt_tol); ++ ++ of_property_read_u32_array(l2_np, "qcom,l2-rates", policy->l2_rate, 3); ++ if (policy->l2_rate[0] && policy->l2_rate[1] && policy->l2_rate[2]) { ++ policy->l2_rate_set = true; ++ of_property_read_u32_array(l2_np, "qcom,l2-cpufreq", policy->l2_cpufreq, 3); ++ of_property_read_u32_array(l2_np, "qcom,l2-volt", policy->l2_volt, 3); ++ } else ++ pr_warn("L2: failed to parse L2 rates\n"); ++ ++ if (!policy->l2_cpufreq[0] && !policy->l2_cpufreq[1] && ++ !policy->l2_cpufreq[2] && policy->l2_rate_set) { ++ int i; ++ ++ pr_warn("L2: failed to parse target cpu freq, using defaults\n"); ++ for (i = 0; i < 3; i++) ++ policy->l2_cpufreq[i] = policy->l2_rate[i]; ++ } ++ ++ if (policy->l2_volt[0] && policy->l2_volt[1] && policy->l2_volt[2] && ++ policy->l2_volt_tol && policy->l2_rate_set) { ++ vdd = of_parse_phandle(l2_np, "qcom,l2-supply", 0); ++ ++ if (vdd) { ++ l2_regulator = devm_regulator_get(cpu_dev, vdd->name); ++ if (!IS_ERR(l2_regulator)) { ++ policy->l2_regulator = l2_regulator; ++ policy->l2_volt_set = true; ++ } else { ++ pr_warn("failed to get l2 supply\n"); ++ l2_regulator = NULL; ++ } ++ ++ of_node_put(vdd); ++ } ++ } ++ } ++ + /* Support turbo/boost mode */ + if (policy_has_boost_freq(policy)) { + /* This gets disabled by core on driver unregister */ +@@ -401,6 +520,14 @@ static int dt_cpufreq_probe(struct platf + if (ret) + return ret; + ++ cpus_shared_data = kzalloc(sizeof(struct shared_data), GFP_KERNEL); ++ if (!cpus_shared_data) ++ return -ENOMEM; ++ ++ cpus_shared_data->curr_freq_table = kzalloc(sizeof(int) * CONFIG_NR_CPUS, GFP_KERNEL); ++ if (!cpus_shared_data->curr_freq_table) ++ return -ENOMEM; ++ + if (data) { + if (data->have_governor_per_policy) + dt_cpufreq_driver.flags |= CPUFREQ_HAVE_GOVERNOR_PER_POLICY; +@@ -419,6 +546,8 @@ static int dt_cpufreq_probe(struct platf + + static int dt_cpufreq_remove(struct platform_device *pdev) + { ++ kfree(cpus_shared_data->curr_freq_table); ++ kfree(cpus_shared_data); + cpufreq_unregister_driver(&dt_cpufreq_driver); + return 0; + } +--- a/include/linux/cpufreq.h ++++ b/include/linux/cpufreq.h +@@ -58,7 +58,15 @@ struct cpufreq_policy { + should set cpufreq */ + unsigned int cpu; /* cpu managing this policy, must be online */ + +- struct clk *clk; ++ struct clk *clk; ++ struct clk *l2_clk; /* L2 clock */ ++ struct regulator *l2_regulator; /* L2 supply */ ++ unsigned int l2_rate[3]; /* L2 bus clock rate */ ++ bool l2_rate_set; ++ unsigned int l2_cpufreq[3]; /* L2 target CPU frequency */ ++ unsigned int l2_volt[3]; /* L2 voltage array */ ++ bool l2_volt_set; ++ unsigned int l2_volt_tol; /* L2 voltage tolerance */ + struct cpufreq_cpuinfo cpuinfo;/* see above */ + + unsigned int min; /* in kHz */ diff --git a/target/linux/ipq806x/patches-5.10/0056-cpufreq-dt-Add-missing-rcu-locks.patch b/target/linux/ipq806x/patches-5.10/0056-cpufreq-dt-Add-missing-rcu-locks.patch new file mode 100644 index 0000000000..9b85839e19 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/0056-cpufreq-dt-Add-missing-rcu-locks.patch @@ -0,0 +1,23 @@ +From 001a8dcb56ced58c518aaa10a4f0ba5e878705b6 Mon Sep 17 00:00:00 2001 +From: Georgi Djakov +Date: Tue, 17 May 2016 16:15:43 +0300 +Subject: [PATCH 56/69] cpufreq-dt: Add missing rcu locks + +Signed-off-by: Georgi Djakov +--- + drivers/cpufreq/cpufreq-dt.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/cpufreq/cpufreq-dt.c ++++ b/drivers/cpufreq/cpufreq-dt.c +@@ -178,8 +178,10 @@ static int opp_notifier(struct notifier_ + ret = PTR_ERR(cpu_reg); + goto out; + } ++ rcu_read_lock(); + volt = dev_pm_opp_get_voltage(opp); + freq = dev_pm_opp_get_freq(opp); ++ rcu_read_unlock(); + + mutex_lock(&priv->lock); + if (freq == priv->opp_freq) { diff --git a/target/linux/ipq806x/patches-5.10/0057-add-fab-scaling-support-with-cpufreq.patch b/target/linux/ipq806x/patches-5.10/0057-add-fab-scaling-support-with-cpufreq.patch new file mode 100644 index 0000000000..441500df79 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/0057-add-fab-scaling-support-with-cpufreq.patch @@ -0,0 +1,243 @@ +--- a/drivers/clk/qcom/Makefile ++++ b/drivers/clk/qcom/Makefile +@@ -15,6 +15,7 @@ clk-qcom-$(CONFIG_KRAIT_CLOCKS) += clk-k + clk-qcom-y += clk-hfpll.o + clk-qcom-y += reset.o + clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o ++clk-qcom-y += fab_scaling.o + + # Keep alphabetically sorted by config + obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o +--- /dev/null ++++ b/drivers/clk/qcom/fab_scaling.c +@@ -0,0 +1,172 @@ ++/* ++ * Copyright (c) 2015, The Linux Foundation. All rights reserved. ++ * ++ * Permission to use, copy, modify, and/or distribute this software for any ++ * purpose with or without fee is hereby granted, provided that the above ++ * copyright notice and this permission notice appear in all copies. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES ++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES ++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF ++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++struct qcom_fab_scaling_data { ++ u32 fab_freq_high; ++ u32 fab_freq_nominal; ++ u32 cpu_freq_threshold; ++ struct clk *apps_fab_clk; ++ struct clk *ddr_fab_clk; ++}; ++ ++static struct qcom_fab_scaling_data *drv_data; ++ ++int scale_fabrics(unsigned long max_cpu_freq) ++{ ++ struct clk *apps_fab_clk = drv_data->apps_fab_clk, ++ *ddr_fab_clk = drv_data->ddr_fab_clk; ++ unsigned long target_freq, cur_freq; ++ int ret; ++ ++ /* Skip fab scaling if the driver is not ready */ ++ if (!apps_fab_clk || !ddr_fab_clk) ++ return 0; ++ ++ if (max_cpu_freq > drv_data->cpu_freq_threshold) ++ target_freq = drv_data->fab_freq_high; ++ else ++ target_freq = drv_data->fab_freq_nominal; ++ ++ cur_freq = clk_get_rate(ddr_fab_clk); ++ ++ if (target_freq != cur_freq) { ++ ret = clk_set_rate(apps_fab_clk, target_freq); ++ if (ret) ++ return ret; ++ ret = clk_set_rate(ddr_fab_clk, target_freq); ++ if (ret) ++ return ret; ++ } ++ ++ return 0; ++} ++EXPORT_SYMBOL(scale_fabrics); ++ ++static int ipq806x_fab_scaling_probe(struct platform_device *pdev) ++{ ++ struct device_node *np = pdev->dev.of_node; ++ struct clk *apps_fab_clk, *ddr_fab_clk; ++ int ret; ++ ++ if (!np) ++ return -ENODEV; ++ ++ drv_data = kzalloc(sizeof(*drv_data), GFP_KERNEL); ++ if (!drv_data) ++ return -ENOMEM; ++ ++ if (of_property_read_u32(np, "fab_freq_high", &drv_data->fab_freq_high)) { ++ pr_err("FABRICS turbo freq not found. Using defaults...\n"); ++ drv_data->fab_freq_high = 533000000; ++ } ++ ++ if (of_property_read_u32(np, "fab_freq_nominal", &drv_data->fab_freq_nominal)) { ++ pr_err("FABRICS nominal freq not found. Using defaults...\n"); ++ drv_data->fab_freq_nominal = 400000000; ++ } ++ ++ if (of_property_read_u32(np, "cpu_freq_threshold", &drv_data->cpu_freq_threshold)) { ++ pr_err("FABRICS cpu freq threshold not found. Using defaults...\n"); ++ drv_data->cpu_freq_threshold = 1000000000; ++ } ++ ++ apps_fab_clk = devm_clk_get(&pdev->dev, "apps-fab-clk"); ++ ret = PTR_ERR_OR_ZERO(apps_fab_clk); ++ if (ret) { ++ /* ++ * If apps fab clk node is present, but clock is not yet ++ * registered, we should try defering probe. ++ */ ++ if (ret != -EPROBE_DEFER) { ++ pr_err("Failed to get APPS FABRIC clock: %d\n", ret); ++ ret = -ENODEV; ++ } ++ goto err; ++ } ++ ++ clk_prepare_enable(apps_fab_clk); ++ clk_set_rate(apps_fab_clk, drv_data->fab_freq_high); ++ drv_data->apps_fab_clk = apps_fab_clk; ++ ++ ddr_fab_clk = devm_clk_get(&pdev->dev, "ddr-fab-clk"); ++ ret = PTR_ERR_OR_ZERO(ddr_fab_clk); ++ if (ret) { ++ /* ++ * If ddr fab clk node is present, but clock is not yet ++ * registered, we should try defering probe. ++ */ ++ if (ret != -EPROBE_DEFER) { ++ pr_err("Failed to get DDR FABRIC clock: %d\n", ret); ++ ddr_fab_clk = NULL; ++ ret = -ENODEV; ++ } ++ goto err; ++ } ++ ++ clk_prepare_enable(ddr_fab_clk); ++ clk_set_rate(ddr_fab_clk, drv_data->fab_freq_high); ++ drv_data->ddr_fab_clk = ddr_fab_clk; ++ ++ return 0; ++err: ++ kfree(drv_data); ++ return ret; ++} ++ ++static int ipq806x_fab_scaling_remove(struct platform_device *pdev) ++{ ++ kfree(drv_data); ++ return 0; ++} ++ ++static const struct of_device_id fab_scaling_ipq806x_match_table[] = { ++ { .compatible = "qcom,fab-scaling" }, ++ { } ++}; ++ ++static struct platform_driver fab_scaling_ipq806x_driver = { ++ .probe = ipq806x_fab_scaling_probe, ++ .remove = ipq806x_fab_scaling_remove, ++ .driver = { ++ .name = "fab-scaling", ++ .of_match_table = fab_scaling_ipq806x_match_table, ++ }, ++}; ++ ++static int __init fab_scaling_ipq806x_init(void) ++{ ++ return platform_driver_register(&fab_scaling_ipq806x_driver); ++} ++late_initcall(fab_scaling_ipq806x_init); ++ ++static void __exit fab_scaling_ipq806x_exit(void) ++{ ++ platform_driver_unregister(&fab_scaling_ipq806x_driver); ++} ++module_exit(fab_scaling_ipq806x_exit); +--- /dev/null ++++ b/include/linux/fab_scaling.h +@@ -0,0 +1,31 @@ ++/* ++ * Copyright (c) 2015, The Linux Foundation. All rights reserved. ++ * ++ * Permission to use, copy, modify, and/or distribute this software for any ++ * purpose with or without fee is hereby granted, provided that the above ++ * copyright notice and this permission notice appear in all copies. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES ++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES ++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF ++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. ++ */ ++ ++ ++#ifndef __FAB_SCALING_H ++#define __FAB_SCALING_H ++ ++/** ++ * scale_fabrics - Scale DDR and APPS FABRICS ++ * ++ * This function monitors all the registered clocks and does APPS ++ * and DDR FABRIC scaling based on the idle frequencies with which ++ * it was registered. ++ * ++ */ ++int scale_fabrics(unsigned long max_cpu_freq); ++ ++#endif +--- a/drivers/cpufreq/cpufreq-dt.c ++++ b/drivers/cpufreq/cpufreq-dt.c +@@ -20,6 +20,7 @@ + #include + #include + #include ++#include + + #include "cpufreq-dt.h" + +@@ -111,6 +112,13 @@ static int set_target(struct cpufreq_pol + } + } + } ++ ++ /* ++ * Scale fabrics with max freq across all cores ++ */ ++ ret = scale_fabrics(target_freq); ++ if (ret) ++ goto exit; + } + priv->opp_freq = freq * 1000; + arch_set_freq_scale(policy->related_cpus, freq, diff --git a/target/linux/ipq806x/patches-5.10/0059-ARM-cpuidle-Add-cpuidle-support-for-QCOM-cpus.patch b/target/linux/ipq806x/patches-5.10/0059-ARM-cpuidle-Add-cpuidle-support-for-QCOM-cpus.patch new file mode 100644 index 0000000000..7d6e3f1605 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/0059-ARM-cpuidle-Add-cpuidle-support-for-QCOM-cpus.patch @@ -0,0 +1,29 @@ +From 04ca10340f1b4d92e849724d322a7ca225d11539 Mon Sep 17 00:00:00 2001 +From: Lina Iyer +Date: Wed, 25 Mar 2015 14:25:29 -0600 +Subject: [PATCH 59/69] ARM: cpuidle: Add cpuidle support for QCOM cpus + +Define ARM_QCOM_CPUIDLE config item to enable cpuidle support. + +Cc: Stephen Boyd +Cc: Arnd Bergmann +Cc: Kevin Hilman +Cc: Daniel Lezcano +Signed-off-by: Lina Iyer +--- + drivers/cpuidle/Kconfig.arm | 7 +++++++ + 1 file changed, 7 insertions(+) + +--- a/drivers/cpuidle/Kconfig.arm ++++ b/drivers/cpuidle/Kconfig.arm +@@ -86,3 +86,10 @@ config ARM_MVEBU_V7_CPUIDLE + depends on ARCH_MVEBU && !ARM64 + help + Select this to enable cpuidle on Armada 370, 38x and XP processors. ++ ++config ARM_QCOM_CPUIDLE ++ bool "CPU Idle Driver for QCOM processors" ++ depends on ARCH_QCOM ++ select ARM_CPUIDLE ++ help ++ Select this to enable cpuidle on QCOM processors. diff --git a/target/linux/ipq806x/patches-5.10/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch b/target/linux/ipq806x/patches-5.10/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch new file mode 100644 index 0000000000..d3b39ac3e3 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch @@ -0,0 +1,62 @@ +From fa71139b55e114aa8c3c4823ff8ee7d49ee810d4 Mon Sep 17 00:00:00 2001 +From: Mathieu Olivari +Date: Wed, 29 Apr 2015 15:21:46 -0700 +Subject: [PATCH 60/69] HACK: arch: arm: force ZRELADDR on arch-qcom + +ARCH_QCOM is using the ARCH_MULTIPLATFORM option, as now recommended +on most ARM architectures. This automatically calculate ZRELADDR by +masking PHYS_OFFSET with 0xf8000000. + +However, on IPQ806x, the first ~20MB of RAM is reserved for the hardware +network accelerators, and the bootloader removes this section from the +layout passed from the ATAGS (when used). + +For newer bootloader, when DT is used, this is not a problem, we just +reserve this memory in the device tree. But if the bootloader doesn't +have DT support, then ATAGS have to be used. In this case, the ARM +decompressor will position the kernel in this low mem, which will not be +in the RAM section mapped by the bootloader, which means the kernel will +freeze in the middle of the boot process trying to map the memory. + +As a work around, this patch allows disabling AUTO_ZRELADDR when +ARCH_QCOM is selected. It makes the zImage usage possible on bootloaders +which don't support device-tree, which is the case on certain early +IPQ806x based designs. + +Signed-off-by: Mathieu Olivari +--- + arch/arm/Kconfig | 2 +- + arch/arm/Makefile | 2 ++ + arch/arm/mach-qcom/Makefile.boot | 1 + + 3 files changed, 4 insertions(+), 1 deletion(-) + create mode 100644 arch/arm/mach-qcom/Makefile.boot + +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig +@@ -318,7 +318,7 @@ config ARCH_MULTIPLATFORM + depends on MMU + select ARM_HAS_SG_CHAIN + select ARM_PATCH_PHYS_VIRT +- select AUTO_ZRELADDR ++ select AUTO_ZRELADDR if !ARCH_QCOM + select TIMER_OF + select COMMON_CLK + select GENERIC_CLOCKEVENTS +--- a/arch/arm/Makefile ++++ b/arch/arm/Makefile +@@ -258,9 +258,11 @@ MACHINE := arch/arm/mach-$(word 1,$(mac + else + MACHINE := + endif ++ifeq ($(CONFIG_ARCH_QCOM),) + ifeq ($(CONFIG_ARCH_MULTIPLATFORM),y) + MACHINE := + endif ++endif + + machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y)) + platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y))) +--- /dev/null ++++ b/arch/arm/mach-qcom/Makefile.boot +@@ -0,0 +1 @@ ++zreladdr-y+= 0x42208000 diff --git a/target/linux/ipq806x/patches-5.10/0061-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch b/target/linux/ipq806x/patches-5.10/0061-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch new file mode 100644 index 0000000000..ff6f6edf49 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/0061-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch @@ -0,0 +1,23 @@ +From 5001f2e1a325b68dbf225bd17f69a4d3d975cca5 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 9 Mar 2017 09:31:44 +0100 +Subject: [PATCH 61/69] mtd: "rootfs" conflicts with OpenWrt auto mounting + +Signed-off-by: John Crispin +--- + drivers/mtd/parsers/qcom_smem_part.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/mtd/parsers/qcom_smem_part.c ++++ b/drivers/mtd/parsers/qcom_smem_part.c +@@ -189,6 +189,10 @@ static int parse_qcom_smem_partitions(st + m_part->size = le32_to_cpu(s_part->size) * (*smem_blksz); + m_part->offset = le32_to_cpu(s_part->start) * (*smem_blksz); + ++ /* "rootfs" conflicts with OpenWrt auto mounting */ ++ if (mtd_type_is_nand(master) && !strcmp(m_part->name, "rootfs")) ++ m_part->name = "ubi"; ++ + /* + * The last SMEM partition may have its size marked as + * something like 0xffffffff, which means "until the end of the diff --git a/target/linux/ipq806x/patches-5.10/0063-1-ipq806x-tsens-driver.patch b/target/linux/ipq806x/patches-5.10/0063-1-ipq806x-tsens-driver.patch new file mode 100644 index 0000000000..80954c17fd --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/0063-1-ipq806x-tsens-driver.patch @@ -0,0 +1,616 @@ +From 3302e1e1a3cfa4e67fda2a61d6f0c42205d40932 Mon Sep 17 00:00:00 2001 +From: Rajith Cherian +Date: Tue, 14 Feb 2017 18:30:43 +0530 +Subject: [PATCH] ipq8064: tsens: Base tsens driver for IPQ8064 + +Add TSENS driver template to support IPQ8064. +This is a base file copied from tsens-8960.c + +Change-Id: I47c573fdfa2d898243c6a6ba952d1632f91391f7 +Signed-off-by: Rajith Cherian + +ipq8064: tsens: TSENS driver support for IPQ8064 + +Support for IPQ8064 tsens driver. The driver works +with the thermal framework. The driver overrides the +following fucntionalities: + +1. Get current temperature. +2. Get/Set trip temperatures. +3. Enabled/Disable trip points. +4. ISR for threshold generated interrupt. +5. Notify userspace when trip points are hit. + +Change-Id: I8bc7204fd627d10875ab13fc1de8cb6c2ed7a918 +Signed-off-by: Rajith Cherian +--- + +--- a/drivers/thermal/qcom/Makefile ++++ b/drivers/thermal/qcom/Makefile +@@ -2,5 +2,5 @@ + obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o + + qcom_tsens-y += tsens.o tsens-common.o tsens-v0_1.o \ +- tsens-8960.o tsens-v2.o tsens-v1.o ++ tsens-8960.o tsens-v2.o tsens-v1.o tsens-ipq8064.o + obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM) += qcom-spmi-temp-alarm.o +--- /dev/null ++++ b/drivers/thermal/qcom/tsens-ipq8064.c +@@ -0,0 +1,551 @@ ++/* ++ * Copyright (c) 2015, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include "tsens.h" ++ ++#define CAL_MDEGC 30000 ++ ++#define CONFIG_ADDR 0x3640 ++/* CONFIG_ADDR bitmasks */ ++#define CONFIG 0x9b ++#define CONFIG_MASK 0xf ++#define CONFIG_SHIFT 0 ++ ++#define STATUS_CNTL_8064 0x3660 ++#define CNTL_ADDR 0x3620 ++/* CNTL_ADDR bitmasks */ ++#define EN BIT(0) ++#define SW_RST BIT(1) ++#define SENSOR0_EN BIT(3) ++#define SLP_CLK_ENA BIT(26) ++#define MEASURE_PERIOD 1 ++#define SENSOR0_SHIFT 3 ++ ++/* INT_STATUS_ADDR bitmasks */ ++#define MIN_STATUS_MASK BIT(0) ++#define LOWER_STATUS_CLR BIT(1) ++#define UPPER_STATUS_CLR BIT(2) ++#define MAX_STATUS_MASK BIT(3) ++ ++#define THRESHOLD_ADDR 0x3624 ++/* THRESHOLD_ADDR bitmasks */ ++#define THRESHOLD_MAX_CODE 0x20000 ++#define THRESHOLD_MIN_CODE 0 ++#define THRESHOLD_MAX_LIMIT_SHIFT 24 ++#define THRESHOLD_MIN_LIMIT_SHIFT 16 ++#define THRESHOLD_UPPER_LIMIT_SHIFT 8 ++#define THRESHOLD_LOWER_LIMIT_SHIFT 0 ++#define THRESHOLD_MAX_LIMIT_MASK (THRESHOLD_MAX_CODE << \ ++ THRESHOLD_MAX_LIMIT_SHIFT) ++#define THRESHOLD_MIN_LIMIT_MASK (THRESHOLD_MAX_CODE << \ ++ THRESHOLD_MIN_LIMIT_SHIFT) ++#define THRESHOLD_UPPER_LIMIT_MASK (THRESHOLD_MAX_CODE << \ ++ THRESHOLD_UPPER_LIMIT_SHIFT) ++#define THRESHOLD_LOWER_LIMIT_MASK (THRESHOLD_MAX_CODE << \ ++ THRESHOLD_LOWER_LIMIT_SHIFT) ++ ++/* Initial temperature threshold values */ ++#define LOWER_LIMIT_TH 0x9d /* 95C */ ++#define UPPER_LIMIT_TH 0xa6 /* 105C */ ++#define MIN_LIMIT_TH 0x0 ++#define MAX_LIMIT_TH 0xff ++ ++#define S0_STATUS_ADDR 0x3628 ++#define STATUS_ADDR_OFFSET 2 ++#define SENSOR_STATUS_SIZE 4 ++#define INT_STATUS_ADDR 0x363c ++#define TRDY_MASK BIT(7) ++#define TIMEOUT_US 100 ++ ++#define TSENS_EN BIT(0) ++#define TSENS_SW_RST BIT(1) ++#define TSENS_ADC_CLK_SEL BIT(2) ++#define SENSOR0_EN BIT(3) ++#define SENSOR1_EN BIT(4) ++#define SENSOR2_EN BIT(5) ++#define SENSOR3_EN BIT(6) ++#define SENSOR4_EN BIT(7) ++#define SENSORS_EN (SENSOR0_EN | SENSOR1_EN | \ ++ SENSOR2_EN | SENSOR3_EN | SENSOR4_EN) ++#define TSENS_8064_SENSOR5_EN BIT(8) ++#define TSENS_8064_SENSOR6_EN BIT(9) ++#define TSENS_8064_SENSOR7_EN BIT(10) ++#define TSENS_8064_SENSOR8_EN BIT(11) ++#define TSENS_8064_SENSOR9_EN BIT(12) ++#define TSENS_8064_SENSOR10_EN BIT(13) ++#define TSENS_8064_SENSORS_EN (SENSORS_EN | \ ++ TSENS_8064_SENSOR5_EN | \ ++ TSENS_8064_SENSOR6_EN | \ ++ TSENS_8064_SENSOR7_EN | \ ++ TSENS_8064_SENSOR8_EN | \ ++ TSENS_8064_SENSOR9_EN | \ ++ TSENS_8064_SENSOR10_EN) ++ ++#define TSENS_8064_SEQ_SENSORS 5 ++#define TSENS_8064_S4_S5_OFFSET 40 ++#define TSENS_FACTOR 1 ++ ++/* Trips: from very hot to very cold */ ++enum tsens_trip_type { ++ TSENS_TRIP_STAGE3 = 0, ++ TSENS_TRIP_STAGE2, ++ TSENS_TRIP_STAGE1, ++ TSENS_TRIP_STAGE0, ++ TSENS_TRIP_NUM, ++}; ++ ++u32 tsens_8064_slope[] = { ++ 1176, 1176, 1154, 1176, ++ 1111, 1132, 1132, 1199, ++ 1132, 1199, 1132 ++ }; ++ ++/* Temperature on y axis and ADC-code on x-axis */ ++static inline int code_to_degC(u32 adc_code, const struct tsens_sensor *s) ++{ ++ int degcbeforefactor, degc; ++ ++ degcbeforefactor = (adc_code * s->slope) + s->offset; ++ ++ if (degcbeforefactor == 0) ++ degc = degcbeforefactor; ++ else if (degcbeforefactor > 0) ++ degc = (degcbeforefactor + TSENS_FACTOR/2) ++ / TSENS_FACTOR; ++ else ++ degc = (degcbeforefactor - TSENS_FACTOR/2) ++ / TSENS_FACTOR; ++ ++ return degc; ++} ++ ++static int degC_to_code(int degC, const struct tsens_sensor *s) ++{ ++ int code = ((degC * TSENS_FACTOR - s->offset) + (s->slope/2)) ++ / s->slope; ++ ++ if (code > THRESHOLD_MAX_CODE) ++ code = THRESHOLD_MAX_CODE; ++ else if (code < THRESHOLD_MIN_CODE) ++ code = THRESHOLD_MIN_CODE; ++ return code; ++} ++ ++static int suspend_ipq8064(struct tsens_priv *priv) ++{ ++ int ret; ++ unsigned int mask; ++ struct regmap *map = priv->tm_map; ++ ++ ret = regmap_read(map, THRESHOLD_ADDR, &priv->ctx.threshold); ++ if (ret) ++ return ret; ++ ++ ret = regmap_read(map, CNTL_ADDR, &priv->ctx.control); ++ if (ret) ++ return ret; ++ ++ mask = SLP_CLK_ENA | EN; ++ ++ ret = regmap_update_bits(map, CNTL_ADDR, mask, 0); ++ if (ret) ++ return ret; ++ ++ return 0; ++} ++ ++static int resume_ipq8064(struct tsens_priv *priv) ++{ ++ int ret; ++ struct regmap *map = priv->tm_map; ++ ++ ret = regmap_update_bits(map, CNTL_ADDR, SW_RST, SW_RST); ++ if (ret) ++ return ret; ++ ++ ret = regmap_update_bits(map, CONFIG_ADDR, CONFIG_MASK, CONFIG); ++ if (ret) ++ return ret; ++ ++ ret = regmap_write(map, THRESHOLD_ADDR, priv->ctx.threshold); ++ if (ret) ++ return ret; ++ ++ ret = regmap_write(map, CNTL_ADDR, priv->ctx.control); ++ if (ret) ++ return ret; ++ ++ return 0; ++} ++ ++static void notify_uspace_tsens_fn(struct work_struct *work) ++{ ++ struct tsens_sensor *s = container_of(work, struct tsens_sensor, ++ notify_work); ++ ++ sysfs_notify(&s->tzd->device.kobj, NULL, "type"); ++} ++ ++static void tsens_scheduler_fn(struct work_struct *work) ++{ ++ struct tsens_priv *priv = container_of(work, struct tsens_priv, ++ tsens_work); ++ unsigned int threshold, threshold_low, code, reg, sensor, mask; ++ unsigned int sensor_addr; ++ bool upper_th_x, lower_th_x; ++ int adc_code, ret; ++ ++ ret = regmap_read(priv->tm_map, STATUS_CNTL_8064, ®); ++ if (ret) ++ return; ++ reg = reg | LOWER_STATUS_CLR | UPPER_STATUS_CLR; ++ ret = regmap_write(priv->tm_map, STATUS_CNTL_8064, reg); ++ if (ret) ++ return; ++ ++ mask = ~(LOWER_STATUS_CLR | UPPER_STATUS_CLR); ++ ret = regmap_read(priv->tm_map, THRESHOLD_ADDR, &threshold); ++ if (ret) ++ return; ++ threshold_low = (threshold & THRESHOLD_LOWER_LIMIT_MASK) ++ >> THRESHOLD_LOWER_LIMIT_SHIFT; ++ threshold = (threshold & THRESHOLD_UPPER_LIMIT_MASK) ++ >> THRESHOLD_UPPER_LIMIT_SHIFT; ++ ++ ret = regmap_read(priv->tm_map, STATUS_CNTL_8064, ®); ++ if (ret) ++ return; ++ ++ ret = regmap_read(priv->tm_map, CNTL_ADDR, &sensor); ++ if (ret) ++ return; ++ sensor &= (uint32_t) TSENS_8064_SENSORS_EN; ++ sensor >>= SENSOR0_SHIFT; ++ ++ /* Constraint: There is only 1 interrupt control register for all ++ * 11 temperature sensor. So monitoring more than 1 sensor based ++ * on interrupts will yield inconsistent result. To overcome this ++ * issue we will monitor only sensor 0 which is the master sensor. ++ */ ++ ++ /* Skip if the sensor is disabled */ ++ if (sensor & 1) { ++ ret = regmap_read(priv->tm_map, priv->sensor[0].status, &code); ++ if (ret) ++ return; ++ upper_th_x = code >= threshold; ++ lower_th_x = code <= threshold_low; ++ if (upper_th_x) ++ mask |= UPPER_STATUS_CLR; ++ if (lower_th_x) ++ mask |= LOWER_STATUS_CLR; ++ if (upper_th_x || lower_th_x) { ++ /* Notify user space */ ++ schedule_work(&priv->sensor[0].notify_work); ++ regmap_read(priv->tm_map, sensor_addr, &adc_code); ++ pr_debug("Trigger (%d degrees) for sensor %d\n", ++ code_to_degC(adc_code, &priv->sensor[0]), 0); ++ } ++ } ++ regmap_write(priv->tm_map, STATUS_CNTL_8064, reg & mask); ++ ++ /* force memory to sync */ ++ mb(); ++} ++ ++static irqreturn_t tsens_isr(int irq, void *data) ++{ ++ struct tsens_priv *priv = data; ++ ++ schedule_work(&priv->tsens_work); ++ return IRQ_HANDLED; ++} ++ ++static void hw_init(struct tsens_priv *priv) ++{ ++ int ret; ++ unsigned int reg_cntl = 0, reg_cfg = 0, reg_thr = 0; ++ unsigned int reg_status_cntl = 0; ++ ++ regmap_read(priv->tm_map, CNTL_ADDR, ®_cntl); ++ regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl | TSENS_SW_RST); ++ ++ reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18) ++ | (((1 << priv->num_sensors) - 1) << SENSOR0_SHIFT); ++ regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl); ++ regmap_read(priv->tm_map, STATUS_CNTL_8064, ®_status_cntl); ++ reg_status_cntl |= LOWER_STATUS_CLR | UPPER_STATUS_CLR ++ | MIN_STATUS_MASK | MAX_STATUS_MASK; ++ regmap_write(priv->tm_map, STATUS_CNTL_8064, reg_status_cntl); ++ reg_cntl |= TSENS_EN; ++ regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl); ++ ++ regmap_read(priv->tm_map, CONFIG_ADDR, ®_cfg); ++ reg_cfg = (reg_cfg & ~CONFIG_MASK) | (CONFIG << CONFIG_SHIFT); ++ regmap_write(priv->tm_map, CONFIG_ADDR, reg_cfg); ++ ++ reg_thr |= (LOWER_LIMIT_TH << THRESHOLD_LOWER_LIMIT_SHIFT) ++ | (UPPER_LIMIT_TH << THRESHOLD_UPPER_LIMIT_SHIFT) ++ | (MIN_LIMIT_TH << THRESHOLD_MIN_LIMIT_SHIFT) ++ | (MAX_LIMIT_TH << THRESHOLD_MAX_LIMIT_SHIFT); ++ ++ regmap_write(priv->tm_map, THRESHOLD_ADDR, reg_thr); ++ ++ ret = devm_request_irq(priv->dev, priv->tsens_irq, tsens_isr, ++ IRQF_TRIGGER_RISING, "tsens_interrupt", priv); ++ if (ret < 0) { ++ pr_err("%s: request_irq FAIL: %d\n", __func__, ret); ++ return; ++ } ++ ++ INIT_WORK(&priv->tsens_work, tsens_scheduler_fn); ++} ++ ++static int init_ipq8064(struct tsens_priv *priv) ++{ ++ int ret, i; ++ u32 reg_cntl, offset = 0; ++ ++ init_common(priv); ++ if (!priv->tm_map) ++ return -ENODEV; ++ ++ /* ++ * The status registers for each sensor are discontiguous ++ * because some SoCs have 5 sensors while others have more ++ * but the control registers stay in the same place, i.e ++ * directly after the first 5 status registers. ++ */ ++ for (i = 0; i < priv->num_sensors; i++) { ++ if (i >= TSENS_8064_SEQ_SENSORS) ++ offset = TSENS_8064_S4_S5_OFFSET; ++ ++ priv->sensor[i].status = S0_STATUS_ADDR + offset ++ + (i << STATUS_ADDR_OFFSET); ++ priv->sensor[i].slope = tsens_8064_slope[i]; ++ INIT_WORK(&priv->sensor[i].notify_work, ++ notify_uspace_tsens_fn); ++ } ++ ++ reg_cntl = SW_RST; ++ ret = regmap_update_bits(priv->tm_map, CNTL_ADDR, SW_RST, reg_cntl); ++ if (ret) ++ return ret; ++ ++ reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18); ++ reg_cntl &= ~SW_RST; ++ ret = regmap_update_bits(priv->tm_map, CONFIG_ADDR, ++ CONFIG_MASK, CONFIG); ++ ++ reg_cntl |= GENMASK(priv->num_sensors - 1, 0) << SENSOR0_SHIFT; ++ ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl); ++ if (ret) ++ return ret; ++ ++ reg_cntl |= EN; ++ ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl); ++ if (ret) ++ return ret; ++ ++ return 0; ++} ++ ++static int calibrate_ipq8064(struct tsens_priv *priv) ++{ ++ int i; ++ char *data, *data_backup; ++ ++ ssize_t num_read = priv->num_sensors; ++ struct tsens_sensor *s = priv->sensor; ++ ++ data = qfprom_read(priv->dev, "calib"); ++ if (IS_ERR(data)) { ++ pr_err("Calibration not found.\n"); ++ return PTR_ERR(data); ++ } ++ ++ data_backup = qfprom_read(priv->dev, "calib_backup"); ++ if (IS_ERR(data_backup)) { ++ pr_err("Backup calibration not found.\n"); ++ return PTR_ERR(data_backup); ++ } ++ ++ for (i = 0; i < num_read; i++) { ++ s[i].calib_data = readb_relaxed(data + i); ++ s[i].calib_data_backup = readb_relaxed(data_backup + i); ++ ++ if (s[i].calib_data_backup) ++ s[i].calib_data = s[i].calib_data_backup; ++ if (!s[i].calib_data) { ++ pr_err("QFPROM TSENS calibration data not present\n"); ++ return -ENODEV; ++ } ++ s[i].slope = tsens_8064_slope[i]; ++ s[i].offset = CAL_MDEGC - (s[i].calib_data * s[i].slope); ++ } ++ ++ hw_init(priv); ++ ++ return 0; ++} ++ ++static int get_temp_ipq8064(struct tsens_priv *priv, int id, int *temp) ++{ ++ int ret; ++ u32 code, trdy; ++ const struct tsens_sensor *s = &priv->sensor[id]; ++ unsigned long timeout; ++ ++ timeout = jiffies + usecs_to_jiffies(TIMEOUT_US); ++ do { ++ ret = regmap_read(priv->tm_map, INT_STATUS_ADDR, &trdy); ++ if (ret) ++ return ret; ++ if (!(trdy & TRDY_MASK)) ++ continue; ++ ret = regmap_read(priv->tm_map, s->status, &code); ++ if (ret) ++ return ret; ++ *temp = code_to_degC(code, s); ++ return 0; ++ } while (time_before(jiffies, timeout)); ++ ++ return -ETIMEDOUT; ++} ++ ++static int set_trip_temp_ipq8064(void *data, int trip, int temp) ++{ ++ unsigned int reg_th, reg_cntl; ++ int ret, code, code_chk, hi_code, lo_code; ++ const struct tsens_sensor *s = data; ++ struct tsens_priv *priv = s->priv; ++ ++ code_chk = code = degC_to_code(temp, s); ++ ++ if (code < THRESHOLD_MIN_CODE || code > THRESHOLD_MAX_CODE) ++ return -EINVAL; ++ ++ ret = regmap_read(priv->tm_map, STATUS_CNTL_8064, ®_cntl); ++ if (ret) ++ return ret; ++ ++ ret = regmap_read(priv->tm_map, THRESHOLD_ADDR, ®_th); ++ if (ret) ++ return ret; ++ ++ hi_code = (reg_th & THRESHOLD_UPPER_LIMIT_MASK) ++ >> THRESHOLD_UPPER_LIMIT_SHIFT; ++ lo_code = (reg_th & THRESHOLD_LOWER_LIMIT_MASK) ++ >> THRESHOLD_LOWER_LIMIT_SHIFT; ++ ++ switch (trip) { ++ case TSENS_TRIP_STAGE3: ++ code <<= THRESHOLD_MAX_LIMIT_SHIFT; ++ reg_th &= ~THRESHOLD_MAX_LIMIT_MASK; ++ break; ++ case TSENS_TRIP_STAGE2: ++ if (code_chk <= lo_code) ++ return -EINVAL; ++ code <<= THRESHOLD_UPPER_LIMIT_SHIFT; ++ reg_th &= ~THRESHOLD_UPPER_LIMIT_MASK; ++ break; ++ case TSENS_TRIP_STAGE1: ++ if (code_chk >= hi_code) ++ return -EINVAL; ++ code <<= THRESHOLD_LOWER_LIMIT_SHIFT; ++ reg_th &= ~THRESHOLD_LOWER_LIMIT_MASK; ++ break; ++ case TSENS_TRIP_STAGE0: ++ code <<= THRESHOLD_MIN_LIMIT_SHIFT; ++ reg_th &= ~THRESHOLD_MIN_LIMIT_MASK; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ ret = regmap_write(priv->tm_map, THRESHOLD_ADDR, reg_th | code); ++ if (ret) ++ return ret; ++ ++ return 0; ++} ++ ++static int set_trip_activate_ipq8064(void *data, int trip, ++ enum thermal_trip_activation_mode mode) ++{ ++ unsigned int reg_cntl, mask, val; ++ const struct tsens_sensor *s = data; ++ struct tsens_priv *priv = s->priv; ++ int ret; ++ ++ if (!priv || trip < 0) ++ return -EINVAL; ++ ++ ret = regmap_read(priv->tm_map, STATUS_CNTL_8064, ®_cntl); ++ if (ret) ++ return ret; ++ ++ switch (trip) { ++ case TSENS_TRIP_STAGE3: ++ mask = MAX_STATUS_MASK; ++ break; ++ case TSENS_TRIP_STAGE2: ++ mask = UPPER_STATUS_CLR; ++ break; ++ case TSENS_TRIP_STAGE1: ++ mask = LOWER_STATUS_CLR; ++ break; ++ case TSENS_TRIP_STAGE0: ++ mask = MIN_STATUS_MASK; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ if (mode == THERMAL_TRIP_ACTIVATION_DISABLED) ++ val = reg_cntl | mask; ++ else ++ val = reg_cntl & ~mask; ++ ++ ret = regmap_write(priv->tm_map, STATUS_CNTL_8064, val); ++ if (ret) ++ return ret; ++ ++ /* force memory to sync */ ++ mb(); ++ return 0; ++} ++ ++const struct tsens_ops ops_ipq8064 = { ++ .init = init_ipq8064, ++ .calibrate = calibrate_ipq8064, ++ .get_temp = get_temp_ipq8064, ++ .suspend = suspend_ipq8064, ++ .resume = resume_ipq8064, ++ .set_trip_temp = set_trip_temp_ipq8064, ++ .set_trip_activate = set_trip_activate_ipq8064, ++}; ++ ++const struct tsens_plat_data data_ipq8064 = { ++ .num_sensors = 11, ++ .ops = &ops_ipq8064, ++}; +--- a/drivers/thermal/qcom/tsens.c ++++ b/drivers/thermal/qcom/tsens.c +@@ -69,8 +69,11 @@ static const struct of_device_id tsens_t + }, { + .compatible = "qcom,tsens-v2", + .data = &data_tsens_v2, ++ }, { ++ .compatible = "qcom,ipq8064-tsens", ++ .data = &data_ipq8064, + }, +- {} ++ {} + }; + MODULE_DEVICE_TABLE(of, tsens_table); + +--- a/drivers/thermal/qcom/tsens.h ++++ b/drivers/thermal/qcom/tsens.h +@@ -324,7 +324,7 @@ extern const struct tsens_plat_data data + extern const struct tsens_plat_data data_8916, data_8974; + + /* TSENS v1 targets */ +-extern const struct tsens_plat_data data_tsens_v1; ++extern const struct tsens_plat_data data_tsens_v1, data_ipq8064; + + /* TSENS v2 targets */ + extern const struct tsens_plat_data data_8996, data_tsens_v2; diff --git a/target/linux/ipq806x/patches-5.10/0063-2-tsens-support-configurable-interrupts.patch b/target/linux/ipq806x/patches-5.10/0063-2-tsens-support-configurable-interrupts.patch new file mode 100644 index 0000000000..585bd62a58 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/0063-2-tsens-support-configurable-interrupts.patch @@ -0,0 +1,437 @@ +From 4e87400732c77765afae2ea89ed43837457aa604 Mon Sep 17 00:00:00 2001 +From: Rajith Cherian +Date: Wed, 1 Feb 2017 19:00:26 +0530 +Subject: [PATCH] ipq8064: tsens: Support for configurable interrupts + +Provide support for adding configurable high and +configurable low trip temperatures. An interrupts is +also triggerred when these trip points are hit. The +interrupts can be activated or deactivated from sysfs. +This functionality is made available only if +CONFIG_THERMAL_WRITABLE_TRIPS is defined. + +Change-Id: Ib73f3f9459de4fffce7bb985a0312a88291f4934 +Signed-off-by: Rajith Cherian +--- + .../devicetree/bindings/thermal/qcom-tsens.txt | 4 ++ + drivers/thermal/of-thermal.c | 63 ++++++++++++++++++---- + drivers/thermal/qcom/tsens.c | 43 ++++++++++++--- + drivers/thermal/qcom/tsens.h | 11 ++++ + drivers/thermal/thermal_core.c | 44 ++++++++++++++- + include/linux/thermal.h | 14 +++++ + 6 files changed, 162 insertions(+), 17 deletions(-) + +--- a/drivers/thermal/of-thermal.c ++++ b/drivers/thermal/of-thermal.c +@@ -91,7 +91,7 @@ static int of_thermal_get_temp(struct th + { + struct __thermal_zone *data = tz->devdata; + +- if (!data->ops->get_temp) ++ if (!data->ops->get_temp || (data->mode == THERMAL_DEVICE_DISABLED)) + return -EINVAL; + + return data->ops->get_temp(data->sensor_data, temp); +@@ -102,7 +102,8 @@ static int of_thermal_set_trips(struct t + { + struct __thermal_zone *data = tz->devdata; + +- if (!data->ops || !data->ops->set_trips) ++ if (!data->ops || !data->ops->set_trips ++ || (data->mode == THERMAL_DEVICE_DISABLED)) + return -EINVAL; + + return data->ops->set_trips(data->sensor_data, low, high); +@@ -188,6 +189,9 @@ static int of_thermal_set_emul_temp(stru + { + struct __thermal_zone *data = tz->devdata; + ++ if (data->mode == THERMAL_DEVICE_DISABLED) ++ return -EINVAL; ++ + return data->ops->set_emul_temp(data->sensor_data, temp); + } + +@@ -196,7 +200,7 @@ static int of_thermal_get_trend(struct t + { + struct __thermal_zone *data = tz->devdata; + +- if (!data->ops->get_trend) ++ if (!data->ops->get_trend || (data->mode == THERMAL_DEVICE_DISABLED)) + return -EINVAL; + + return data->ops->get_trend(data->sensor_data, trip, trend); +@@ -297,7 +301,9 @@ static int of_thermal_set_mode(struct th + mutex_unlock(&tz->lock); + + data->mode = mode; +- thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); ++ ++ if (mode == THERMAL_DEVICE_ENABLED) ++ thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); + + return 0; + } +@@ -307,7 +313,8 @@ static int of_thermal_get_trip_type(stru + { + struct __thermal_zone *data = tz->devdata; + +- if (trip >= data->ntrips || trip < 0) ++ if (trip >= data->ntrips || trip < 0 ++ || (data->mode == THERMAL_DEVICE_DISABLED)) + return -EDOM; + + *type = data->trips[trip].type; +@@ -315,12 +322,39 @@ static int of_thermal_get_trip_type(stru + return 0; + } + ++static int of_thermal_activate_trip_type(struct thermal_zone_device *tz, ++ int trip, enum thermal_trip_activation_mode mode) ++{ ++ struct __thermal_zone *data = tz->devdata; ++ ++ if (trip >= data->ntrips || trip < 0 ++ || (data->mode == THERMAL_DEVICE_DISABLED)) ++ return -EDOM; ++ ++ /* ++ * The configurable_hi and configurable_lo trip points can be ++ * activated and deactivated. ++ */ ++ ++ if (data->ops->set_trip_activate) { ++ int ret; ++ ++ ret = data->ops->set_trip_activate(data->sensor_data, ++ trip, mode); ++ if (ret) ++ return ret; ++ } ++ ++ return 0; ++} ++ + static int of_thermal_get_trip_temp(struct thermal_zone_device *tz, int trip, + int *temp) + { + struct __thermal_zone *data = tz->devdata; + +- if (trip >= data->ntrips || trip < 0) ++ if (trip >= data->ntrips || trip < 0 ++ || (data->mode == THERMAL_DEVICE_DISABLED)) + return -EDOM; + + *temp = data->trips[trip].temperature; +@@ -333,7 +367,8 @@ static int of_thermal_set_trip_temp(stru + { + struct __thermal_zone *data = tz->devdata; + +- if (trip >= data->ntrips || trip < 0) ++ if (trip >= data->ntrips || trip < 0 ++ || (data->mode == THERMAL_DEVICE_DISABLED)) + return -EDOM; + + if (data->ops->set_trip_temp) { +@@ -355,7 +390,8 @@ static int of_thermal_get_trip_hyst(stru + { + struct __thermal_zone *data = tz->devdata; + +- if (trip >= data->ntrips || trip < 0) ++ if (trip >= data->ntrips || trip < 0 ++ || (data->mode == THERMAL_DEVICE_DISABLED)) + return -EDOM; + + *hyst = data->trips[trip].hysteresis; +@@ -368,7 +404,8 @@ static int of_thermal_set_trip_hyst(stru + { + struct __thermal_zone *data = tz->devdata; + +- if (trip >= data->ntrips || trip < 0) ++ if (trip >= data->ntrips || trip < 0 ++ || (data->mode == THERMAL_DEVICE_DISABLED)) + return -EDOM; + + /* thermal framework should take care of data->mask & (1 << trip) */ +@@ -443,6 +480,9 @@ thermal_zone_of_add_sensor(struct device + if (ops->set_emul_temp) + tzd->ops->set_emul_temp = of_thermal_set_emul_temp; + ++ if (ops->set_trip_activate) ++ tzd->ops->set_trip_activate = of_thermal_activate_trip_type; ++ + mutex_unlock(&tzd->lock); + + return tzd; +@@ -762,7 +802,10 @@ static const char * const trip_types[] = + [THERMAL_TRIP_ACTIVE] = "active", + [THERMAL_TRIP_PASSIVE] = "passive", + [THERMAL_TRIP_HOT] = "hot", +- [THERMAL_TRIP_CRITICAL] = "critical", ++ [THERMAL_TRIP_CRITICAL] = "critical_high", ++ [THERMAL_TRIP_CONFIGURABLE_HI] = "configurable_hi", ++ [THERMAL_TRIP_CONFIGURABLE_LOW] = "configurable_lo", ++ [THERMAL_TRIP_CRITICAL_LOW] = "critical_low", + }; + + /** +--- a/drivers/thermal/qcom/tsens.c ++++ b/drivers/thermal/qcom/tsens.c +@@ -22,7 +22,7 @@ static int tsens_get_temp(void *data, in + + static int tsens_get_trend(void *data, int trip, enum thermal_trend *trend) + { +- const struct tsens_sensor *s = data; ++ struct tsens_sensor *s = data; + struct tsens_priv *priv = s->priv; + + if (priv->ops->get_trend) +@@ -31,9 +31,10 @@ static int tsens_get_trend(void *data, i + return -ENOTSUPP; + } + +-static int __maybe_unused tsens_suspend(struct device *dev) ++static int __maybe_unused tsens_suspend(void *data) + { +- struct tsens_priv *priv = dev_get_drvdata(dev); ++ struct tsens_sensor *s = data; ++ struct tsens_priv *priv = s->priv; + + if (priv->ops && priv->ops->suspend) + return priv->ops->suspend(priv); +@@ -41,9 +42,10 @@ static int __maybe_unused tsens_suspend + return 0; + } + +-static int __maybe_unused tsens_resume(struct device *dev) ++static int __maybe_unused tsens_resume(void *data) + { +- struct tsens_priv *priv = dev_get_drvdata(dev); ++ struct tsens_sensor *s = data; ++ struct tsens_priv *priv = s->priv; + + if (priv->ops && priv->ops->resume) + return priv->ops->resume(priv); +@@ -51,6 +53,30 @@ static int __maybe_unused tsens_resume(s + return 0; + } + ++static int __maybe_unused tsens_set_trip_temp(void *data, int trip, int temp) ++{ ++ struct tsens_sensor *s = data; ++ struct tsens_priv *priv = s->priv; ++ ++ if (priv->ops && priv->ops->set_trip_temp) ++ return priv->ops->set_trip_temp(s, trip, temp); ++ ++ return 0; ++} ++ ++static int __maybe_unused tsens_activate_trip_type(void *data, int trip, ++ enum thermal_trip_activation_mode mode) ++{ ++ struct tsens_sensor *s = data; ++ struct tsens_priv *priv = s->priv; ++ ++ if (priv->ops && priv->ops->set_trip_activate) ++ return priv->ops->set_trip_activate(s, trip, mode); ++ ++ return 0; ++} ++ ++ + static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume); + + static const struct of_device_id tsens_table[] = { +@@ -80,6 +106,8 @@ MODULE_DEVICE_TABLE(of, tsens_table); + static const struct thermal_zone_of_device_ops tsens_of_ops = { + .get_temp = tsens_get_temp, + .get_trend = tsens_get_trend, ++ .set_trip_temp = tsens_set_trip_temp, ++ .set_trip_activate = tsens_activate_trip_type, + }; + + static int tsens_register(struct tsens_priv *priv) +@@ -123,7 +151,7 @@ static int tsens_probe(struct platform_d + if (id) + data = id->data; + else +- data = &data_8960; ++ return -EINVAL; + + num_sensors = data->num_sensors; + +@@ -144,6 +172,9 @@ static int tsens_probe(struct platform_d + priv->dev = dev; + priv->num_sensors = num_sensors; + priv->ops = data->ops; ++ ++ priv->tsens_irq = platform_get_irq(pdev, 0); ++ + for (i = 0; i < priv->num_sensors; i++) { + if (data->hw_ids) + priv->sensor[i].hw_id = data->hw_ids[i]; +--- a/drivers/thermal/qcom/tsens.h ++++ b/drivers/thermal/qcom/tsens.h +@@ -40,9 +40,12 @@ enum tsens_ver { + struct tsens_sensor { + struct tsens_priv *priv; + struct thermal_zone_device *tzd; ++ struct work_struct notify_work; + int offset; + unsigned int id; + unsigned int hw_id; ++ int calib_data; ++ int calib_data_backup; + int slope; + u32 status; + }; +@@ -57,6 +60,9 @@ struct tsens_sensor { + * @suspend: Function to suspend the tsens device + * @resume: Function to resume the tsens device + * @get_trend: Function to get the thermal/temp trend ++ * @set_trip_temp: Function to set trip temp ++ * @get_trip_temp: Function to get trip temp ++ * @set_trip_activate: Function to activate trip points + */ + struct tsens_ops { + /* mandatory callbacks */ +@@ -69,6 +75,9 @@ struct tsens_ops { + int (*suspend)(struct tsens_priv *priv); + int (*resume)(struct tsens_priv *priv); + int (*get_trend)(struct tsens_priv *priv, int i, enum thermal_trend *trend); ++ int (*set_trip_temp)(void *data, int trip, int temp); ++ int (*set_trip_activate)(void *data, int trip, ++ enum thermal_trip_activation_mode mode); + }; + + #define REG_FIELD_FOR_EACH_SENSOR11(_name, _offset, _startbit, _stopbit) \ +@@ -300,6 +309,7 @@ struct tsens_context { + struct tsens_priv { + struct device *dev; + u32 num_sensors; ++ u32 tsens_irq; + struct regmap *tm_map; + struct regmap *srot_map; + u32 tm_offset; +@@ -308,6 +318,7 @@ struct tsens_priv { + const struct tsens_features *feat; + const struct reg_field *fields; + const struct tsens_ops *ops; ++ struct work_struct tsens_work; + struct tsens_sensor sensor[0]; + }; + +--- a/drivers/thermal/thermal_sysfs.c ++++ b/drivers/thermal/thermal_sysfs.c +@@ -113,12 +113,48 @@ trip_point_type_show(struct device *dev, + return sprintf(buf, "passive\n"); + case THERMAL_TRIP_ACTIVE: + return sprintf(buf, "active\n"); ++ case THERMAL_TRIP_CONFIGURABLE_HI: ++ return sprintf(buf, "configurable_hi\n"); ++ case THERMAL_TRIP_CONFIGURABLE_LOW: ++ return sprintf(buf, "configurable_low\n"); ++ case THERMAL_TRIP_CRITICAL_LOW: ++ return sprintf(buf, "critical_low\n"); + default: + return sprintf(buf, "unknown\n"); + } + } + + static ssize_t ++trip_point_type_activate(struct device *dev, struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct thermal_zone_device *tz = to_thermal_zone(dev); ++ int trip, ret; ++ char *enabled = "enabled"; ++ char *disabled = "disabled"; ++ ++ if (!tz->ops->set_trip_activate) ++ return -EPERM; ++ ++ if (!sscanf(attr->attr.name, "trip_point_%d_type", &trip)) ++ return -EINVAL; ++ ++ if (!strncmp(buf, enabled, strlen(enabled))) ++ ret = tz->ops->set_trip_activate(tz, trip, ++ THERMAL_TRIP_ACTIVATION_ENABLED); ++ else if (!strncmp(buf, disabled, strlen(disabled))) ++ ret = tz->ops->set_trip_activate(tz, trip, ++ THERMAL_TRIP_ACTIVATION_DISABLED); ++ else ++ ret = -EINVAL; ++ ++ if (ret) ++ return ret; ++ ++ return count; ++} ++ ++static ssize_t + trip_point_temp_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) + { +@@ -559,6 +595,12 @@ static int create_trip_attrs(struct ther + tz->trip_type_attrs[indx].attr.show = trip_point_type_show; + attrs[indx] = &tz->trip_type_attrs[indx].attr.attr; + ++ if (IS_ENABLED(CONFIG_THERMAL_WRITABLE_TRIPS)) { ++ tz->trip_type_attrs[indx].attr.store ++ = trip_point_type_activate; ++ tz->trip_type_attrs[indx].attr.attr.mode |= S_IWUSR; ++ } ++ + /* create trip temp attribute */ + snprintf(tz->trip_temp_attrs[indx].name, THERMAL_NAME_LENGTH, + "trip_point_%d_temp", indx); +--- a/include/linux/thermal.h ++++ b/include/linux/thermal.h +@@ -63,11 +63,19 @@ enum thermal_device_mode { + THERMAL_DEVICE_ENABLED, + }; + ++enum thermal_trip_activation_mode { ++ THERMAL_TRIP_ACTIVATION_DISABLED = 0, ++ THERMAL_TRIP_ACTIVATION_ENABLED, ++}; ++ + enum thermal_trip_type { + THERMAL_TRIP_ACTIVE = 0, + THERMAL_TRIP_PASSIVE, + THERMAL_TRIP_HOT, + THERMAL_TRIP_CRITICAL, ++ THERMAL_TRIP_CONFIGURABLE_HI, ++ THERMAL_TRIP_CONFIGURABLE_LOW, ++ THERMAL_TRIP_CRITICAL_LOW, + }; + + enum thermal_trend { +@@ -105,6 +113,8 @@ struct thermal_zone_device_ops { + enum thermal_trip_type *); + int (*get_trip_temp) (struct thermal_zone_device *, int, int *); + int (*set_trip_temp) (struct thermal_zone_device *, int, int); ++ int (*set_trip_activate) (struct thermal_zone_device *, int, ++ enum thermal_trip_activation_mode); + int (*get_trip_hyst) (struct thermal_zone_device *, int, int *); + int (*set_trip_hyst) (struct thermal_zone_device *, int, int); + int (*get_crit_temp) (struct thermal_zone_device *, int *); +@@ -349,6 +359,8 @@ struct thermal_genl_event { + * temperature. + * @set_trip_temp: a pointer to a function that sets the trip temperature on + * hardware. ++ * @activate_trip_type: a pointer to a function to enable/disable trip ++ * temperature interrupts + */ + struct thermal_zone_of_device_ops { + int (*get_temp)(void *, int *); +@@ -356,6 +368,8 @@ struct thermal_zone_of_device_ops { + int (*set_trips)(void *, int, int); + int (*set_emul_temp)(void *, int); + int (*set_trip_temp)(void *, int, int); ++ int (*set_trip_activate)(void *, int, ++ enum thermal_trip_activation_mode); + }; + + /** diff --git a/target/linux/ipq806x/patches-5.10/0063-3-tsens-fix-kernel-5_4.patch b/target/linux/ipq806x/patches-5.10/0063-3-tsens-fix-kernel-5_4.patch new file mode 100644 index 0000000000..6c056db3b7 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/0063-3-tsens-fix-kernel-5_4.patch @@ -0,0 +1,68 @@ +--- a/drivers/thermal/qcom/tsens-ipq8064.c ++++ b/drivers/thermal/qcom/tsens-ipq8064.c +@@ -18,6 +18,7 @@ + #include + #include + #include ++#include + #include + #include + #include "tsens.h" +@@ -320,15 +321,42 @@ static void hw_init(struct tsens_priv *p + INIT_WORK(&priv->tsens_work, tsens_scheduler_fn); + } + ++static const struct regmap_config tsens_config = { ++ .name = "tm", ++ .reg_bits = 32, ++ .val_bits = 32, ++ .reg_stride = 4, ++}; ++ + static int init_ipq8064(struct tsens_priv *priv) + { +- int ret, i; ++ struct device *dev = priv->dev; + u32 reg_cntl, offset = 0; ++ struct resource *res; ++ resource_size_t size; ++ void __iomem *base; ++ int ret, i; ++ struct platform_device *op = of_find_device_by_node(priv->dev->of_node); ++ ++ if (!op) ++ return -EINVAL; + +- init_common(priv); +- if (!priv->tm_map) +- return -ENODEV; ++ /* old DTs where SROT and TM were in a contiguous 2K block */ ++ priv->tm_offset = 0x1000; + ++ res = platform_get_resource(op, IORESOURCE_MEM, 0); ++ size = resource_size(res); ++ base = devm_ioremap(&op->dev, res->start, size); ++ if (IS_ERR(base)) { ++ ret = PTR_ERR(base); ++ goto err_put_device; ++ } ++ ++ priv->tm_map = devm_regmap_init_mmio(dev, base, &tsens_config); ++ if (IS_ERR(priv->tm_map)) { ++ ret = PTR_ERR(priv->tm_map); ++ goto err_put_device; ++ } + /* + * The status registers for each sensor are discontiguous + * because some SoCs have 5 sensors while others have more +@@ -367,6 +395,10 @@ static int init_ipq8064(struct tsens_pri + return ret; + + return 0; ++ ++err_put_device: ++ put_device(&op->dev); ++ return ret; + } + + static int calibrate_ipq8064(struct tsens_priv *priv) diff --git a/target/linux/ipq806x/patches-5.10/0063-4-ip806x-tsense-rework-driver.patch b/target/linux/ipq806x/patches-5.10/0063-4-ip806x-tsense-rework-driver.patch new file mode 100644 index 0000000000..67fc8db7a3 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/0063-4-ip806x-tsense-rework-driver.patch @@ -0,0 +1,107 @@ +--- a/drivers/thermal/qcom/tsens-ipq8064.c ++++ b/drivers/thermal/qcom/tsens-ipq8064.c +@@ -13,10 +13,12 @@ + */ + + #include ++#include + #include + #include + #include + #include ++#include + #include + #include + #include +@@ -211,9 +213,8 @@ static void tsens_scheduler_fn(struct wo + struct tsens_priv *priv = container_of(work, struct tsens_priv, + tsens_work); + unsigned int threshold, threshold_low, code, reg, sensor, mask; +- unsigned int sensor_addr; + bool upper_th_x, lower_th_x; +- int adc_code, ret; ++ int ret; + + ret = regmap_read(priv->tm_map, STATUS_CNTL_8064, ®); + if (ret) +@@ -262,9 +263,8 @@ static void tsens_scheduler_fn(struct wo + if (upper_th_x || lower_th_x) { + /* Notify user space */ + schedule_work(&priv->sensor[0].notify_work); +- regmap_read(priv->tm_map, sensor_addr, &adc_code); + pr_debug("Trigger (%d degrees) for sensor %d\n", +- code_to_degC(adc_code, &priv->sensor[0]), 0); ++ code_to_degC(code, &priv->sensor[0]), 0); + } + } + regmap_write(priv->tm_map, STATUS_CNTL_8064, reg & mask); +@@ -404,40 +404,55 @@ err_put_device: + static int calibrate_ipq8064(struct tsens_priv *priv) + { + int i; +- char *data, *data_backup; +- ++ int ret = 0; ++ u8 *data, *data_backup; ++ struct device *dev = priv->dev; + ssize_t num_read = priv->num_sensors; + struct tsens_sensor *s = priv->sensor; + +- data = qfprom_read(priv->dev, "calib"); ++ data = qfprom_read(dev, "calib"); + if (IS_ERR(data)) { +- pr_err("Calibration not found.\n"); +- return PTR_ERR(data); ++ ret = PTR_ERR(data); ++ if (ret != -EPROBE_DEFER) ++ dev_err(dev, "Calibration not found."); ++ goto exit; + } + +- data_backup = qfprom_read(priv->dev, "calib_backup"); ++ data_backup = qfprom_read(dev, "calib_backup"); + if (IS_ERR(data_backup)) { +- pr_err("Backup calibration not found.\n"); +- return PTR_ERR(data_backup); ++ ret = PTR_ERR(data_backup); ++ if (ret != -EPROBE_DEFER) ++ dev_err(dev, "Backup Calibration not found."); ++ goto free_data; + } + + for (i = 0; i < num_read; i++) { + s[i].calib_data = readb_relaxed(data + i); +- s[i].calib_data_backup = readb_relaxed(data_backup + i); ++ ++ if (!s[i].calib_data) { ++ s[i].calib_data_backup = readb_relaxed(data_backup + i); ++ ++ if (!s[i].calib_data_backup) { ++ dev_err(dev, "QFPROM TSENS calibration data not present"); ++ ret = -ENODEV; ++ goto free_backup; ++ } + +- if (s[i].calib_data_backup) + s[i].calib_data = s[i].calib_data_backup; +- if (!s[i].calib_data) { +- pr_err("QFPROM TSENS calibration data not present\n"); +- return -ENODEV; + } ++ + s[i].slope = tsens_8064_slope[i]; + s[i].offset = CAL_MDEGC - (s[i].calib_data * s[i].slope); + } + + hw_init(priv); + +- return 0; ++free_backup: ++ kfree(data_backup); ++free_data: ++ kfree(data); ++exit: ++ return ret; + } + + static int get_temp_ipq8064(struct tsens_priv *priv, int id, int *temp) diff --git a/target/linux/ipq806x/patches-5.10/0065-arm-override-compiler-flags.patch b/target/linux/ipq806x/patches-5.10/0065-arm-override-compiler-flags.patch new file mode 100644 index 0000000000..0d2a4274c7 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/0065-arm-override-compiler-flags.patch @@ -0,0 +1,21 @@ +From 4d8e29642661397a339ac3485f212c6360445421 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 9 Mar 2017 09:33:32 +0100 +Subject: [PATCH 65/69] arm: override compiler flags + +Signed-off-by: John Crispin +--- + arch/arm/Makefile | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm/Makefile ++++ b/arch/arm/Makefile +@@ -67,7 +67,7 @@ KBUILD_CFLAGS += $(call cc-option,-fno-i + # macro, but instead defines a whole series of macros which makes + # testing for a specific architecture or later rather impossible. + arch-$(CONFIG_CPU_32v7M) =-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m +-arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a) ++arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 -mcpu=cortex-a15 + arch-$(CONFIG_CPU_32v6) =-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6) + # Only override the compiler option if ARMv6. The ARMv6K extensions are + # always available in ARMv7 diff --git a/target/linux/ipq806x/patches-5.10/0067-generic-Mangle-bootloader-s-kernel-arguments.patch b/target/linux/ipq806x/patches-5.10/0067-generic-Mangle-bootloader-s-kernel-arguments.patch new file mode 100644 index 0000000000..751ac10a19 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/0067-generic-Mangle-bootloader-s-kernel-arguments.patch @@ -0,0 +1,210 @@ +From 71270226b14733a4b1f2cde58ea9265caa50b38d Mon Sep 17 00:00:00 2001 +From: Adrian Panella +Date: Thu, 9 Mar 2017 09:37:17 +0100 +Subject: [PATCH 67/69] generic: Mangle bootloader's kernel arguments + +The command-line arguments provided by the boot loader will be +appended to a new device tree property: bootloader-args. +If there is a property "append-rootblock" in DT under /chosen +and a root= option in bootloaders command line it will be parsed +and added to DT bootargs with the form: XX. +Only command line ATAG will be processed, the rest of the ATAGs +sent by bootloader will be ignored. +This is usefull in dual boot systems, to get the current root partition +without afecting the rest of the system. + +Signed-off-by: Adrian Panella +--- + arch/arm/Kconfig | 11 +++++ + arch/arm/boot/compressed/atags_to_fdt.c | 72 ++++++++++++++++++++++++++++++++- + init/main.c | 16 ++++++++ + 3 files changed, 98 insertions(+), 1 deletion(-) + +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig +@@ -1827,6 +1827,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN + The command-line arguments provided by the boot loader will be + appended to the the device tree bootargs property. + ++config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE ++ bool "Append rootblock parsing bootloader's kernel arguments" ++ help ++ The command-line arguments provided by the boot loader will be ++ appended to a new device tree property: bootloader-args. ++ If there is a property "append-rootblock" in DT under /chosen ++ and a root= option in bootloaders command line it will be parsed ++ and added to DT bootargs with the form: XX. ++ Only command line ATAG will be processed, the rest of the ATAGs ++ sent by bootloader will be ignored. ++ + endchoice + + config CMDLINE +--- a/arch/arm/boot/compressed/atags_to_fdt.c ++++ b/arch/arm/boot/compressed/atags_to_fdt.c +@@ -4,6 +4,8 @@ + + #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND) + #define do_extend_cmdline 1 ++#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) ++#define do_extend_cmdline 1 + #else + #define do_extend_cmdline 0 + #endif +@@ -67,6 +69,80 @@ static uint32_t get_cell_size(const void + return cell_size; + } + ++#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) ++/** ++ * taken from arch/x86/boot/string.c ++ * local_strstr - Find the first substring in a %NUL terminated string ++ * @s1: The string to be searched ++ * @s2: The string to search for ++ */ ++static char *local_strstr(const char *s1, const char *s2) ++{ ++ size_t l1, l2; ++ ++ l2 = strlen(s2); ++ if (!l2) ++ return (char *)s1; ++ l1 = strlen(s1); ++ while (l1 >= l2) { ++ l1--; ++ if (!memcmp(s1, s2, l2)) ++ return (char *)s1; ++ s1++; ++ } ++ return NULL; ++} ++ ++static char *append_rootblock(char *dest, const char *str, int len, void *fdt) ++{ ++ char *ptr, *end, *tmp; ++ char *root="root="; ++ char *find_rootblock; ++ int i, l; ++ const char *rootblock; ++ ++ find_rootblock = getprop(fdt, "/chosen", "find-rootblock", &l); ++ if(!find_rootblock) ++ find_rootblock = root; ++ ++ //ARM doesn't have __HAVE_ARCH_STRSTR, so it was copied from x86 ++ ptr = local_strstr(str, find_rootblock); ++ ++ if(!ptr) ++ return dest; ++ ++ end = strchr(ptr, ' '); ++ end = end ? (end - 1) : (strchr(ptr, 0) - 1); ++ ++ // Some boards ubi.mtd=XX,ZZZZ, so let's check for '," too. ++ tmp = strchr(ptr, ','); ++ ++ if(tmp) ++ end = end < tmp ? end : tmp - 1; ++ ++ //find partition number (assumes format root=/dev/mtdXX | /dev/mtdblockXX | yy:XX | ubi.mtd=XX,ZZZZ ) ++ for( i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++); ++ ptr = end + 1; ++ ++ /* if append-rootblock property is set use it to append to command line */ ++ rootblock = getprop(fdt, "/chosen", "append-rootblock", &l); ++ if(rootblock != NULL) { ++ if(*dest != ' ') { ++ *dest = ' '; ++ dest++; ++ len++; ++ } ++ if (len + l + i <= COMMAND_LINE_SIZE) { ++ memcpy(dest, rootblock, l); ++ dest += l - 1; ++ memcpy(dest, ptr, i); ++ dest += i; ++ } ++ } ++ return dest; ++} ++#endif ++ + static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline) + { + char cmdline[COMMAND_LINE_SIZE]; +@@ -86,12 +162,21 @@ static void merge_fdt_bootargs(void *fdt + + /* and append the ATAG_CMDLINE */ + if (fdt_cmdline) { ++ ++#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) ++ //save original bootloader args ++ //and append ubi.mtd with root partition number to current cmdline ++ setprop_string(fdt, "/chosen", "bootloader-args", fdt_cmdline); ++ ptr = append_rootblock(ptr, fdt_cmdline, len, fdt); ++ ++#else + len = strlen(fdt_cmdline); + if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) { + *ptr++ = ' '; + memcpy(ptr, fdt_cmdline, len); + ptr += len; + } ++#endif + } + *ptr = '\0'; + +@@ -166,7 +251,9 @@ int atags_to_fdt(void *atag_list, void * + else + setprop_string(fdt, "/chosen", "bootargs", + atag->u.cmdline.cmdline); +- } else if (atag->hdr.tag == ATAG_MEM) { ++ } ++#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE ++ else if (atag->hdr.tag == ATAG_MEM) { + if (memcount >= sizeof(mem_reg_property)/4) + continue; + if (!atag->u.mem.size) +@@ -210,6 +297,10 @@ int atags_to_fdt(void *atag_list, void * + setprop(fdt, "/memory", "reg", mem_reg_property, + 4 * memcount * memsize); + } ++#else ++ ++ } ++#endif + + return fdt_pack(fdt); + } +--- a/init/main.c ++++ b/init/main.c +@@ -104,6 +104,10 @@ + #define CREATE_TRACE_POINTS + #include + ++#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) ++#include ++#endif ++ + static int kernel_init(void *); + + extern void init_IRQ(void); +@@ -633,6 +637,18 @@ asmlinkage __visible void __init start_k + pr_notice("Kernel command line: %s\n", boot_command_line); + /* parameters may set static keys */ + jump_label_init(); ++ ++#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) ++ //Show bootloader's original command line for reference ++ if(of_chosen) { ++ const char *prop = of_get_property(of_chosen, "bootloader-args", NULL); ++ if(prop) ++ pr_notice("Bootloader command line (ignored): %s\n", prop); ++ else ++ pr_notice("Bootloader command line not present\n"); ++ } ++#endif ++ + parse_early_param(); + after_dashes = parse_args("Booting kernel", + static_command_line, __start___param, diff --git a/target/linux/ipq806x/patches-5.10/0069-arm-boot-add-dts-files.patch b/target/linux/ipq806x/patches-5.10/0069-arm-boot-add-dts-files.patch new file mode 100644 index 0000000000..055a4cbc30 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/0069-arm-boot-add-dts-files.patch @@ -0,0 +1,37 @@ +From 8f68331e14dff9a101f2d0e1d6bec84a031f27ee Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 9 Mar 2017 11:03:18 +0100 +Subject: [PATCH 69/69] arm: boot: add dts files + +Signed-off-by: John Crispin +--- + arch/arm/boot/dts/Makefile | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -842,7 +842,24 @@ dtb-$(CONFIG_ARCH_QCOM) += \ + qcom-ipq4019-ap.dk04.1-c3.dtb \ + qcom-ipq4019-ap.dk07.1-c1.dtb \ + qcom-ipq4019-ap.dk07.1-c2.dtb \ ++ qcom-ipq8062-wg2600hp3.dtb \ + qcom-ipq8064-ap148.dtb \ ++ qcom-ipq8064-c2600.dtb \ ++ qcom-ipq8064-d7800.dtb \ ++ qcom-ipq8064-db149.dtb \ ++ qcom-ipq8064-ap161.dtb \ ++ qcom-ipq8064-ea7500-v1.dtb \ ++ qcom-ipq8064-ea8500.dtb \ ++ qcom-ipq8064-g10.dtb \ ++ qcom-ipq8064-r7500.dtb \ ++ qcom-ipq8064-r7500v2.dtb \ ++ qcom-ipq8064-unifi-ac-hd.dtb \ ++ qcom-ipq8064-wg2600hp.dtb \ ++ qcom-ipq8064-wpq864.dtb \ ++ qcom-ipq8064-wxr-2533dhp.dtb \ ++ qcom-ipq8065-nbg6817.dtb \ ++ qcom-ipq8065-r7800.dtb \ ++ qcom-ipq8068-ecw5410.dtb \ + qcom-msm8660-surf.dtb \ + qcom-msm8960-cdp.dtb \ + qcom-msm8974-fairphone-fp2.dtb \ diff --git a/target/linux/ipq806x/patches-5.10/0072-add-ipq806x-with-no-clocks.patch b/target/linux/ipq806x/patches-5.10/0072-add-ipq806x-with-no-clocks.patch new file mode 100644 index 0000000000..b7cebd9d39 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/0072-add-ipq806x-with-no-clocks.patch @@ -0,0 +1,10 @@ +--- a/drivers/firmware/qcom_scm.c ++++ b/drivers/firmware/qcom_scm.c +@@ -598,6 +598,7 @@ static const struct of_device_id qcom_sc + SCM_HAS_BUS_CLK) + }, + { .compatible = "qcom,scm-ipq4019" }, ++ { .compatible = "qcom,scm-ipq806x" }, + { .compatible = "qcom,scm-msm8660", .data = (void *) SCM_HAS_CORE_CLK }, + { .compatible = "qcom,scm-msm8960", .data = (void *) SCM_HAS_CORE_CLK }, + { .compatible = "qcom,scm-msm8916", .data = (void *)(SCM_HAS_CORE_CLK | diff --git a/target/linux/ipq806x/patches-5.10/080-v5.7-ARM-dts-qcom-add-gpio-ranges-property.patch b/target/linux/ipq806x/patches-5.10/080-v5.7-ARM-dts-qcom-add-gpio-ranges-property.patch new file mode 100644 index 0000000000..0dc9debbfd --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/080-v5.7-ARM-dts-qcom-add-gpio-ranges-property.patch @@ -0,0 +1,70 @@ +From patchwork Mon May 21 20:57:38 2018 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v5,3/4] ARM: dts: qcom: add gpio-ranges property +X-Patchwork-Submitter: Christian Lamparter +X-Patchwork-Id: 917856 +Message-Id: <0ae3376606a89bcdf3fe753a5c967f7103699e09.1526935804.git.chunkeey@gmail.com> +To: linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org, + linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org +Cc: Bjorn Andersson , + Linus Walleij , + Stephen Boyd , David Brown , + Rob Herring , Mark Rutland , + Andy Gross , + Sven Eckelmann +Date: Mon, 21 May 2018 22:57:38 +0200 +From: Christian Lamparter +List-Id: + +This patch adds the gpio-ranges property to almost all of +the Qualcomm ARM platforms that utilize the pinctrl-msm +framework. + +The gpio-ranges property is part of the gpiolib subsystem. +As a result, the binding text is available in section +"2.1 gpio- and pin-controller interaction" of +Documentation/devicetree/bindings/gpio/gpio.txt + +For more information please see the patch titled: +"pinctrl: msm: fix gpio-hog related boot issues" from +this series. + +Reported-by: Sven Eckelmann +Tested-by: Sven Eckelmann [ipq4019] +Reviewed-by: Bjorn Andersson +Signed-off-by: Christian Lamparter +Reviewed-by: Linus Walleij +--- +To help with git bisect, the DT update patch has been intentionally +placed after the "pinctrl: msm: fix gpio-hog related boot issues". +Otherwise - if the order was reveresed - and bisect decides to split +between these two patches, the gpiochip_add_pin_ranges() function +will be executed twice with the same parameters for the same pinctrl. +--- + arch/arm/boot/dts/qcom-apq8064.dtsi | 1 + + arch/arm/boot/dts/qcom-apq8084.dtsi | 1 + + arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 + + arch/arm/boot/dts/qcom-ipq8064.dtsi | 1 + + arch/arm/boot/dts/qcom-mdm9615.dtsi | 1 + + arch/arm/boot/dts/qcom-msm8660.dtsi | 1 + + arch/arm/boot/dts/qcom-msm8960.dtsi | 1 + + arch/arm/boot/dts/qcom-msm8974.dtsi | 1 + + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 3 ++- + arch/arm64/boot/dts/qcom/msm8916.dtsi | 1 + + arch/arm64/boot/dts/qcom/msm8992.dtsi | 1 + + arch/arm64/boot/dts/qcom/msm8994.dtsi | 1 + + arch/arm64/boot/dts/qcom/msm8996.dtsi | 1 + + 13 files changed, 14 insertions(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -119,6 +119,7 @@ + reg = <0x800000 0x4000>; + + gpio-controller; ++ gpio-ranges = <&qcom_pinmux 0 0 69>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; diff --git a/target/linux/ipq806x/patches-5.10/081-v5.8-ARM-dts-qcom-add-scm-definition-to-ipq806x.patch b/target/linux/ipq806x/patches-5.10/081-v5.8-ARM-dts-qcom-add-scm-definition-to-ipq806x.patch new file mode 100644 index 0000000000..f5483ac734 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/081-v5.8-ARM-dts-qcom-add-scm-definition-to-ipq806x.patch @@ -0,0 +1,29 @@ +From 51befb888f62b1a62434fb4b82328d698a30f9de Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 19 Mar 2020 23:44:24 +0100 +Subject: ARM: dts: qcom: add scm definition to ipq806x + +Add missing scm definition for ipq806x soc + +Signed-off-by: Ansuel Smith +Link: https://lore.kernel.org/r/20200319224424.18473-1-ansuelsmth@gmail.com +Signed-off-by: Bjorn Andersson +--- + arch/arm/boot/dts/qcom-ipq8064.dtsi | 6 ++++++ + 1 file changed, 6 insertions(+) + +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -93,6 +93,12 @@ + }; + }; + ++ firmware { ++ scm { ++ compatible = "qcom,scm-ipq806x", "qcom,scm"; ++ }; ++ }; ++ + soc: soc { + #address-cells = <1>; + #size-cells = <1>; diff --git a/target/linux/ipq806x/patches-5.10/082-ipq8064-dtsi-tweaks.patch b/target/linux/ipq806x/patches-5.10/082-ipq8064-dtsi-tweaks.patch new file mode 100644 index 0000000000..568ca5bb88 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/082-ipq8064-dtsi-tweaks.patch @@ -0,0 +1,130 @@ +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -20,7 +20,7 @@ + #address-cells = <1>; + #size-cells = <0>; + +- cpu@0 { ++ cpu0: cpu@0 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; +@@ -30,7 +30,7 @@ + qcom,saw = <&saw0>; + }; + +- cpu@1 { ++ cpu1: cpu@1 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; +@@ -67,7 +67,7 @@ + no-map; + }; + +- smem@41000000 { ++ smem: smem@41000000 { + reg = <0x41000000 0x200000>; + no-map; + }; +@@ -155,6 +155,7 @@ + function = "pcie3_rst"; + drive-strength = <12>; + bias-disable; ++ output-low; + }; + }; + +@@ -219,21 +220,23 @@ + acc0: clock-controller@2088000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02088000 0x1000>, <0x02008000 0x1000>; ++ clock-output-names = "acpu0_aux"; + }; + + acc1: clock-controller@2098000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02098000 0x1000>, <0x02008000 0x1000>; ++ clock-output-names = "acpu1_aux"; + }; + + saw0: regulator@2089000 { +- compatible = "qcom,saw2"; ++ compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon"; + reg = <0x02089000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + + saw1: regulator@2099000 { +- compatible = "qcom,saw2"; ++ compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon"; + reg = <0x02099000 0x1000>, <0x02009000 0x1000>; + regulator; + }; +@@ -251,7 +254,7 @@ + + syscon-tcsr = <&tcsr>; + +- serial@12490000 { ++ gsbi2_serial: serial@12490000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x12490000 0x1000>, + <0x12480000 0x1000>; +@@ -326,7 +329,7 @@ + + syscon-tcsr = <&tcsr>; + +- serial@1a240000 { ++ gsbi5_serial: serial@1a240000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x1a240000 0x1000>, + <0x1a200000 0x1000>; +@@ -397,7 +400,7 @@ + status = "disabled"; + }; + +- sata@29000000 { ++ sata: sata@29000000 { + compatible = "qcom,ipq806x-ahci", "generic-ahci"; + reg = <0x29000000 0x180>; + +@@ -430,6 +433,7 @@ + reg = <0x00900000 0x4000>; + #clock-cells = <1>; + #reset-cells = <1>; ++ #power-domain-cells = <1>; + }; + + tcsr: syscon@1a400000 { +@@ -625,13 +629,13 @@ + qcom,ee = <0>; + }; + +- amba { +- compatible = "simple-bus"; ++ amba: amba { ++ compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + +- sdcc@12400000 { ++ sdcc1: sdcc@12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; +@@ -645,13 +649,12 @@ + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; +- mmc-ddr-1_8v; + vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; + dma-names = "tx", "rx"; + }; + +- sdcc@12180000 { ++ sdcc3: sdcc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; diff --git a/target/linux/ipq806x/patches-5.10/083-ipq8064-dtsi-additions.patch b/target/linux/ipq806x/patches-5.10/083-ipq8064-dtsi-additions.patch new file mode 100644 index 0000000000..221ecd7396 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/083-ipq8064-dtsi-additions.patch @@ -0,0 +1,992 @@ +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -8,6 +8,8 @@ + #include + #include + #include ++#include ++#include + + / { + #address-cells = <1>; +@@ -28,6 +30,16 @@ + next-level-cache = <&L2>; + qcom,acc = <&acc0>; + qcom,saw = <&saw0>; ++ clocks = <&kraitcc 0>, <&kraitcc 4>; ++ clock-names = "cpu", "l2"; ++ clock-latency = <100000>; ++ cpu-supply = <&smb208_s2a>; ++ operating-points-v2 = <&opp_table0>; ++ voltage-tolerance = <5>; ++ cooling-min-state = <0>; ++ cooling-max-state = <10>; ++ #cooling-cells = <2>; ++ cpu-idle-states = <&CPU_SPC>; + }; + + cpu1: cpu@1 { +@@ -38,11 +50,458 @@ + next-level-cache = <&L2>; + qcom,acc = <&acc1>; + qcom,saw = <&saw1>; ++ clocks = <&kraitcc 1>, <&kraitcc 4>; ++ clock-names = "cpu", "l2"; ++ clock-latency = <100000>; ++ cpu-supply = <&smb208_s2b>; ++ operating-points-v2 = <&opp_table0>; ++ voltage-tolerance = <5>; ++ cooling-min-state = <0>; ++ cooling-max-state = <10>; ++ #cooling-cells = <2>; ++ cpu-idle-states = <&CPU_SPC>; + }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; ++ qcom,saw = <&saw_l2>; ++ }; ++ ++ qcom,l2 { ++ qcom,l2-rates = <384000000 1000000000 1200000000>; ++ qcom,l2-cpufreq = <384000000 600000000 1200000000>; ++ qcom,l2-volt = <1100000 1100000 1150000>; ++ qcom,l2-supply = <&smb208_s1a>; ++ }; ++ ++ idle-states { ++ CPU_SPC: spc { ++ compatible = "qcom,idle-state-spc", "arm,idle-state"; ++ status = "disabled"; ++ entry-latency-us = <400>; ++ exit-latency-us = <900>; ++ min-residency-us = <3000>; ++ }; ++ }; ++ }; ++ ++ opp_table0: opp_table0 { ++ compatible = "operating-points-v2-kryo-cpu"; ++ nvmem-cells = <&speedbin_efuse>; ++ ++ opp-384000000 { ++ opp-hz = /bits/ 64 <384000000>; ++ opp-microvolt-speed0-pvs0-v0 = <1000000>; ++ opp-microvolt-speed0-pvs1-v0 = <925000>; ++ opp-microvolt-speed0-pvs2-v0 = <875000>; ++ opp-microvolt-speed0-pvs3-v0 = <800000>; ++ opp-supported-hw = <0x1>; ++ clock-latency-ns = <100000>; ++ }; ++ ++ opp-600000000 { ++ opp-hz = /bits/ 64 <600000000>; ++ opp-microvolt-speed0-pvs0-v0 = <1050000>; ++ opp-microvolt-speed0-pvs1-v0 = <975000>; ++ opp-microvolt-speed0-pvs2-v0 = <925000>; ++ opp-microvolt-speed0-pvs3-v0 = <850000>; ++ opp-supported-hw = <0x1>; ++ clock-latency-ns = <100000>; ++ }; ++ ++ opp-800000000 { ++ opp-hz = /bits/ 64 <800000000>; ++ opp-microvolt-speed0-pvs0-v0 = <1100000>; ++ opp-microvolt-speed0-pvs1-v0 = <1025000>; ++ opp-microvolt-speed0-pvs2-v0 = <995000>; ++ opp-microvolt-speed0-pvs3-v0 = <900000>; ++ opp-supported-hw = <0x1>; ++ clock-latency-ns = <100000>; ++ }; ++ ++ opp-1000000000 { ++ opp-hz = /bits/ 64 <1000000000>; ++ opp-microvolt-speed0-pvs0-v0 = <1150000>; ++ opp-microvolt-speed0-pvs1-v0 = <1075000>; ++ opp-microvolt-speed0-pvs2-v0 = <1025000>; ++ opp-microvolt-speed0-pvs3-v0 = <950000>; ++ opp-supported-hw = <0x1>; ++ clock-latency-ns = <100000>; ++ }; ++ ++ opp-1200000000 { ++ opp-hz = /bits/ 64 <1200000000>; ++ opp-microvolt-speed0-pvs0-v0 = <1200000>; ++ opp-microvolt-speed0-pvs1-v0 = <1125000>; ++ opp-microvolt-speed0-pvs2-v0 = <1075000>; ++ opp-microvolt-speed0-pvs3-v0 = <1000000>; ++ opp-supported-hw = <0x1>; ++ clock-latency-ns = <100000>; ++ }; ++ ++ opp-1400000000 { ++ opp-hz = /bits/ 64 <1400000000>; ++ opp-microvolt-speed0-pvs0-v0 = <1250000>; ++ opp-microvolt-speed0-pvs1-v0 = <1175000>; ++ opp-microvolt-speed0-pvs2-v0 = <1125000>; ++ opp-microvolt-speed0-pvs3-v0 = <1050000>; ++ opp-supported-hw = <0x1>; ++ clock-latency-ns = <100000>; ++ }; ++ }; ++ ++ thermal-zones { ++ tsens_tz_sensor0 { ++ polling-delay-passive = <0>; ++ polling-delay = <0>; ++ thermal-sensors = <&tsens 0>; ++ ++ trips { ++ cpu-critical-hi { ++ temperature = <125000>; ++ hysteresis = <2000>; ++ type = "critical_high"; ++ }; ++ ++ cpu-config-hi { ++ temperature = <105000>; ++ hysteresis = <2000>; ++ type = "configurable_hi"; ++ }; ++ ++ cpu-config-lo { ++ temperature = <95000>; ++ hysteresis = <2000>; ++ type = "configurable_lo"; ++ }; ++ ++ cpu-critical-low { ++ temperature = <0>; ++ hysteresis = <2000>; ++ type = "critical_low"; ++ }; ++ }; ++ }; ++ ++ tsens_tz_sensor1 { ++ polling-delay-passive = <0>; ++ polling-delay = <0>; ++ thermal-sensors = <&tsens 1>; ++ ++ trips { ++ cpu-critical-hi { ++ temperature = <125000>; ++ hysteresis = <2000>; ++ type = "critical_high"; ++ }; ++ ++ cpu-config-hi { ++ temperature = <105000>; ++ hysteresis = <2000>; ++ type = "configurable_hi"; ++ }; ++ ++ cpu-config-lo { ++ temperature = <95000>; ++ hysteresis = <2000>; ++ type = "configurable_lo"; ++ }; ++ ++ cpu-critical-low { ++ temperature = <0>; ++ hysteresis = <2000>; ++ type = "critical_low"; ++ }; ++ }; ++ }; ++ ++ tsens_tz_sensor2 { ++ polling-delay-passive = <0>; ++ polling-delay = <0>; ++ thermal-sensors = <&tsens 2>; ++ ++ trips { ++ cpu-critical-hi { ++ temperature = <125000>; ++ hysteresis = <2000>; ++ type = "critical_high"; ++ }; ++ ++ cpu-config-hi { ++ temperature = <105000>; ++ hysteresis = <2000>; ++ type = "configurable_hi"; ++ }; ++ ++ cpu-config-lo { ++ temperature = <95000>; ++ hysteresis = <2000>; ++ type = "configurable_lo"; ++ }; ++ ++ cpu-critical-low { ++ temperature = <0>; ++ hysteresis = <2000>; ++ type = "critical_low"; ++ }; ++ }; ++ }; ++ ++ tsens_tz_sensor3 { ++ polling-delay-passive = <0>; ++ polling-delay = <0>; ++ thermal-sensors = <&tsens 3>; ++ ++ trips { ++ cpu-critical-hi { ++ temperature = <125000>; ++ hysteresis = <2000>; ++ type = "critical_high"; ++ }; ++ ++ cpu-config-hi { ++ temperature = <105000>; ++ hysteresis = <2000>; ++ type = "configurable_hi"; ++ }; ++ ++ cpu-config-lo { ++ temperature = <95000>; ++ hysteresis = <2000>; ++ type = "configurable_lo"; ++ }; ++ ++ cpu-critical-low { ++ temperature = <0>; ++ hysteresis = <2000>; ++ type = "critical_low"; ++ }; ++ }; ++ }; ++ ++ tsens_tz_sensor4 { ++ polling-delay-passive = <0>; ++ polling-delay = <0>; ++ thermal-sensors = <&tsens 4>; ++ ++ trips { ++ cpu-critical-hi { ++ temperature = <125000>; ++ hysteresis = <2000>; ++ type = "critical_high"; ++ }; ++ ++ cpu-config-hi { ++ temperature = <105000>; ++ hysteresis = <2000>; ++ type = "configurable_hi"; ++ }; ++ ++ cpu-config-lo { ++ temperature = <95000>; ++ hysteresis = <2000>; ++ type = "configurable_lo"; ++ }; ++ ++ cpu-critical-low { ++ temperature = <0>; ++ hysteresis = <2000>; ++ type = "critical_low"; ++ }; ++ }; ++ }; ++ ++ tsens_tz_sensor5 { ++ polling-delay-passive = <0>; ++ polling-delay = <0>; ++ thermal-sensors = <&tsens 5>; ++ ++ trips { ++ cpu-critical-hi { ++ temperature = <125000>; ++ hysteresis = <2000>; ++ type = "critical_high"; ++ }; ++ ++ cpu-config-hi { ++ temperature = <105000>; ++ hysteresis = <2000>; ++ type = "configurable_hi"; ++ }; ++ ++ cpu-config-lo { ++ temperature = <95000>; ++ hysteresis = <2000>; ++ type = "configurable_lo"; ++ }; ++ ++ cpu-critical-low { ++ temperature = <0>; ++ hysteresis = <2000>; ++ type = "critical_low"; ++ }; ++ }; ++ }; ++ ++ tsens_tz_sensor6 { ++ polling-delay-passive = <0>; ++ polling-delay = <0>; ++ thermal-sensors = <&tsens 6>; ++ ++ trips { ++ cpu-critical-hi { ++ temperature = <125000>; ++ hysteresis = <2000>; ++ type = "critical_high"; ++ }; ++ ++ cpu-config-hi { ++ temperature = <105000>; ++ hysteresis = <2000>; ++ type = "configurable_hi"; ++ }; ++ ++ cpu-config-lo { ++ temperature = <95000>; ++ hysteresis = <2000>; ++ type = "configurable_lo"; ++ }; ++ ++ cpu-critical-low { ++ temperature = <0>; ++ hysteresis = <2000>; ++ type = "critical_low"; ++ }; ++ }; ++ }; ++ ++ tsens_tz_sensor7 { ++ polling-delay-passive = <0>; ++ polling-delay = <0>; ++ thermal-sensors = <&tsens 7>; ++ ++ trips { ++ cpu-critical-hi { ++ temperature = <125000>; ++ hysteresis = <2000>; ++ type = "critical_high"; ++ }; ++ ++ cpu-config-hi { ++ temperature = <105000>; ++ hysteresis = <2000>; ++ type = "configurable_hi"; ++ }; ++ ++ cpu-config-lo { ++ temperature = <95000>; ++ hysteresis = <2000>; ++ type = "configurable_lo"; ++ }; ++ ++ cpu-critical-low { ++ temperature = <0>; ++ hysteresis = <2000>; ++ type = "critical_low"; ++ }; ++ }; ++ }; ++ ++ tsens_tz_sensor8 { ++ polling-delay-passive = <0>; ++ polling-delay = <0>; ++ thermal-sensors = <&tsens 8>; ++ ++ trips { ++ cpu-critical-hi { ++ temperature = <125000>; ++ hysteresis = <2000>; ++ type = "critical_high"; ++ }; ++ ++ cpu-config-hi { ++ temperature = <105000>; ++ hysteresis = <2000>; ++ type = "configurable_hi"; ++ }; ++ ++ cpu-config-lo { ++ temperature = <95000>; ++ hysteresis = <2000>; ++ type = "configurable_lo"; ++ }; ++ ++ cpu-critical-low { ++ temperature = <0>; ++ hysteresis = <2000>; ++ type = "critical_low"; ++ }; ++ }; ++ }; ++ ++ tsens_tz_sensor9 { ++ polling-delay-passive = <0>; ++ polling-delay = <0>; ++ thermal-sensors = <&tsens 9>; ++ ++ trips { ++ cpu-critical-hi { ++ temperature = <125000>; ++ hysteresis = <2000>; ++ type = "critical_high"; ++ }; ++ ++ cpu-config-hi { ++ temperature = <105000>; ++ hysteresis = <2000>; ++ type = "configurable_hi"; ++ }; ++ ++ cpu-config-lo { ++ temperature = <95000>; ++ hysteresis = <2000>; ++ type = "configurable_lo"; ++ }; ++ ++ cpu-critical-low { ++ temperature = <0>; ++ hysteresis = <2000>; ++ type = "critical_low"; ++ }; ++ }; ++ }; ++ ++ tsens_tz_sensor10 { ++ polling-delay-passive = <0>; ++ polling-delay = <0>; ++ thermal-sensors = <&tsens 10>; ++ ++ trips { ++ cpu-critical-hi { ++ temperature = <125000>; ++ hysteresis = <2000>; ++ type = "critical_high"; ++ }; ++ ++ cpu-config-hi { ++ temperature = <105000>; ++ hysteresis = <2000>; ++ type = "configurable_hi"; ++ }; ++ ++ cpu-config-lo { ++ temperature = <95000>; ++ hysteresis = <2000>; ++ type = "configurable_lo"; ++ }; ++ ++ cpu-critical-low { ++ temperature = <0>; ++ hysteresis = <2000>; ++ type = "critical_low"; ++ }; ++ }; + }; + }; + +@@ -93,6 +552,15 @@ + }; + }; + ++ fab-scaling { ++ compatible = "qcom,fab-scaling"; ++ clocks = <&rpmcc RPM_APPS_FABRIC_A_CLK>, <&rpmcc RPM_EBI1_A_CLK>; ++ clock-names = "apps-fab-clk", "ddr-fab-clk"; ++ fab_freq_high = <533000000>; ++ fab_freq_nominal = <400000000>; ++ cpu_freq_threshold = <1000000000>; ++ }; ++ + firmware { + scm { + compatible = "qcom,scm-ipq806x", "qcom,scm"; +@@ -120,6 +588,84 @@ + reg-names = "lpass-lpaif"; + }; + ++ qfprom: qfprom@700000 { ++ compatible = "qcom,qfprom", "syscon"; ++ reg = <0x700000 0x1000>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ status = "okay"; ++ tsens_calib: calib@400 { ++ reg = <0x400 0xb>; ++ }; ++ tsens_backup: backup@410 { ++ reg = <0x410 0xb>; ++ }; ++ speedbin_efuse: speedbin@0c0 { ++ reg = <0x0c0 0x4>; ++ }; ++ }; ++ ++ rpm: rpm@108000 { ++ compatible = "qcom,rpm-ipq8064"; ++ reg = <0x108000 0x1000>; ++ qcom,ipc = <&l2cc 0x8 2>; ++ ++ interrupts = , ++ , ++ ; ++ interrupt-names = "ack", "err", "wakeup"; ++ ++ clocks = <&gcc RPM_MSG_RAM_H_CLK>; ++ clock-names = "ram"; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ rpmcc: clock-controller { ++ compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc"; ++ #clock-cells = <1>; ++ }; ++ ++ regulators { ++ compatible = "qcom,rpm-smb208-regulators"; ++ ++ smb208_s1a: s1a { ++ regulator-min-microvolt = <1050000>; ++ regulator-max-microvolt = <1150000>; ++ ++ qcom,switch-mode-frequency = <1200000>; ++ }; ++ ++ smb208_s1b: s1b { ++ regulator-min-microvolt = <1050000>; ++ regulator-max-microvolt = <1150000>; ++ ++ qcom,switch-mode-frequency = <1200000>; ++ }; ++ ++ smb208_s2a: s2a { ++ regulator-min-microvolt = < 800000>; ++ regulator-max-microvolt = <1250000>; ++ ++ qcom,switch-mode-frequency = <1200000>; ++ }; ++ ++ smb208_s2b: s2b { ++ regulator-min-microvolt = < 800000>; ++ regulator-max-microvolt = <1250000>; ++ ++ qcom,switch-mode-frequency = <1200000>; ++ }; ++ }; ++ }; ++ ++ rng@1a500000 { ++ compatible = "qcom,prng"; ++ reg = <0x1a500000 0x200>; ++ clocks = <&gcc PRNG_CLK>; ++ clock-names = "core"; ++ }; ++ + qcom_pinmux: pinmux@800000 { + compatible = "qcom,ipq8064-pinctrl"; + reg = <0x800000 0x4000>; +@@ -159,6 +705,15 @@ + }; + }; + ++ i2c4_pins: i2c4_pinmux { ++ mux { ++ pins = "gpio12", "gpio13"; ++ function = "gsbi4"; ++ drive-strength = <12>; ++ bias-disable; ++ }; ++ }; ++ + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; +@@ -168,6 +723,53 @@ + }; + }; + ++ nand_pins: nand_pins { ++ disable { ++ pins = "gpio34", "gpio35", "gpio36", ++ "gpio37", "gpio38"; ++ function = "nand"; ++ drive-strength = <10>; ++ bias-disable; ++ }; ++ ++ pullups { ++ pins = "gpio39"; ++ function = "nand"; ++ drive-strength = <10>; ++ bias-pull-up; ++ }; ++ ++ hold { ++ pins = "gpio40", "gpio41", "gpio42", ++ "gpio43", "gpio44", "gpio45", ++ "gpio46", "gpio47"; ++ function = "nand"; ++ drive-strength = <10>; ++ bias-bus-hold; ++ }; ++ }; ++ ++ mdio0_pins: mdio0_pins { ++ mux { ++ pins = "gpio0", "gpio1"; ++ function = "mdio"; ++ drive-strength = <8>; ++ bias-disable; ++ }; ++ }; ++ ++ rgmii2_pins: rgmii2_pins { ++ mux { ++ pins = "gpio27", "gpio28", "gpio29", ++ "gpio30", "gpio31", "gpio32", ++ "gpio51", "gpio52", "gpio59", ++ "gpio60", "gpio61", "gpio62"; ++ function = "rgmii2"; ++ drive-strength = <8>; ++ bias-disable; ++ }; ++ }; ++ + leds_pins: leds_pins { + mux { + pins = "gpio7", "gpio8", "gpio9", +@@ -229,6 +831,17 @@ + clock-output-names = "acpu1_aux"; + }; + ++ l2cc: clock-controller@2011000 { ++ compatible = "qcom,kpss-gcc", "syscon"; ++ reg = <0x2011000 0x1000>; ++ clock-output-names = "acpu_l2_aux"; ++ }; ++ ++ kraitcc: clock-controller { ++ compatible = "qcom,krait-cc-v1"; ++ #clock-cells = <1>; ++ }; ++ + saw0: regulator@2089000 { + compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon"; + reg = <0x02089000 0x1000>, <0x02009000 0x1000>; +@@ -241,6 +854,17 @@ + regulator; + }; + ++ saw_l2: regulator@02012000 { ++ compatible = "qcom,saw2", "syscon"; ++ reg = <0x02012000 0x1000>; ++ regulator; ++ }; ++ ++ sic_non_secure: sic-non-secure@12100000 { ++ compatible = "syscon"; ++ reg = <0x12100000 0x10000>; ++ }; ++ + gsbi2: gsbi@12480000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <2>; +@@ -436,6 +1060,15 @@ + #power-domain-cells = <1>; + }; + ++ tsens: thermal-sensor@900000 { ++ compatible = "qcom,ipq8064-tsens"; ++ reg = <0x900000 0x3680>; ++ nvmem-cells = <&tsens_calib>, <&tsens_backup>; ++ nvmem-cell-names = "calib", "calib_backup"; ++ interrupts = ; ++ #thermal-sensor-cells = <1>; ++ }; ++ + tcsr: syscon@1a400000 { + compatible = "qcom,tcsr-ipq8064", "syscon"; + reg = <0x1a400000 0x100>; +@@ -448,6 +1081,95 @@ + #reset-cells = <1>; + }; + ++ sfpb_mutex_block: syscon@1200600 { ++ compatible = "syscon"; ++ reg = <0x01200600 0x100>; ++ }; ++ ++ hs_phy_0: hs_phy_0 { ++ compatible = "qcom,ipq806x-usb-phy-hs"; ++ reg = <0x110f8800 0x30>; ++ clocks = <&gcc USB30_0_UTMI_CLK>; ++ clock-names = "ref"; ++ #phy-cells = <0>; ++ }; ++ ++ ss_phy_0: ss_phy_0 { ++ compatible = "qcom,ipq806x-usb-phy-ss"; ++ reg = <0x110f8830 0x30>; ++ clocks = <&gcc USB30_0_MASTER_CLK>; ++ clock-names = "ref"; ++ #phy-cells = <0>; ++ }; ++ ++ usb3_0: usb3@110f8800 { ++ compatible = "qcom,dwc3", "syscon"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ reg = <0x110f8800 0x8000>; ++ clocks = <&gcc USB30_0_MASTER_CLK>; ++ clock-names = "core"; ++ ++ ranges; ++ ++ resets = <&gcc USB30_0_MASTER_RESET>; ++ reset-names = "master"; ++ ++ status = "disabled"; ++ ++ dwc3_0: dwc3@11000000 { ++ compatible = "snps,dwc3"; ++ reg = <0x11000000 0xcd00>; ++ interrupts = ; ++ phys = <&hs_phy_0>, <&ss_phy_0>; ++ phy-names = "usb2-phy", "usb3-phy"; ++ dr_mode = "host"; ++ snps,dis_u3_susphy_quirk; ++ }; ++ }; ++ ++ hs_phy_1: hs_phy_1 { ++ compatible = "qcom,ipq806x-usb-phy-hs"; ++ reg = <0x100f8800 0x30>; ++ clocks = <&gcc USB30_1_UTMI_CLK>; ++ clock-names = "ref"; ++ #phy-cells = <0>; ++ }; ++ ++ ss_phy_1: ss_phy_1 { ++ compatible = "qcom,ipq806x-usb-phy-ss"; ++ reg = <0x100f8830 0x30>; ++ clocks = <&gcc USB30_1_MASTER_CLK>; ++ clock-names = "ref"; ++ #phy-cells = <0>; ++ }; ++ ++ usb3_1: usb3@100f8800 { ++ compatible = "qcom,dwc3", "syscon"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ reg = <0x100f8800 0x8000>; ++ clocks = <&gcc USB30_1_MASTER_CLK>; ++ clock-names = "core"; ++ ++ ranges; ++ ++ resets = <&gcc USB30_1_MASTER_RESET>; ++ reset-names = "master"; ++ ++ status = "disabled"; ++ ++ dwc3_1: dwc3@10000000 { ++ compatible = "snps,dwc3"; ++ reg = <0x10000000 0xcd00>; ++ interrupts = ; ++ phys = <&hs_phy_1>, <&ss_phy_1>; ++ phy-names = "usb2-phy", "usb3-phy"; ++ dr_mode = "host"; ++ snps,dis_u3_susphy_quirk; ++ }; ++ }; ++ + pcie0: pci@1b500000 { + compatible = "qcom,pcie-ipq8064"; + reg = <0x1b500000 0x1000 +@@ -601,6 +1323,167 @@ + perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>; + }; + ++ adm_dma: dma@18300000 { ++ compatible = "qcom,adm"; ++ reg = <0x18300000 0x100000>; ++ interrupts = ; ++ #dma-cells = <1>; ++ ++ clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>; ++ clock-names = "core", "iface"; ++ ++ resets = <&gcc ADM0_RESET>, ++ <&gcc ADM0_PBUS_RESET>, ++ <&gcc ADM0_C0_RESET>, ++ <&gcc ADM0_C1_RESET>, ++ <&gcc ADM0_C2_RESET>; ++ reset-names = "clk", "pbus", "c0", "c1", "c2"; ++ qcom,ee = <0>; ++ ++ status = "disabled"; ++ }; ++ ++ nand_controller: nand-controller@1ac00000 { ++ compatible = "qcom,ipq806x-nand"; ++ reg = <0x1ac00000 0x800>; ++ ++ clocks = <&gcc EBI2_CLK>, ++ <&gcc EBI2_AON_CLK>; ++ clock-names = "core", "aon"; ++ ++ dmas = <&adm_dma 3>; ++ dma-names = "rxtx"; ++ qcom,cmd-crci = <15>; ++ qcom,data-crci = <3>; ++ ++ status = "disabled"; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ nss_common: syscon@03000000 { ++ compatible = "syscon"; ++ reg = <0x03000000 0x0000FFFF>; ++ }; ++ ++ qsgmii_csr: syscon@1bb00000 { ++ compatible = "syscon"; ++ reg = <0x1bb00000 0x000001FF>; ++ }; ++ ++ stmmac_axi_setup: stmmac-axi-config { ++ snps,wr_osr_lmt = <7>; ++ snps,rd_osr_lmt = <7>; ++ snps,blen = <16 0 0 0 0 0 0>; ++ }; ++ ++ mdio0: mdio@37000000 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ compatible = "qcom,ipq8064-mdio", "syscon"; ++ reg = <0x37000000 0x200000>; ++ resets = <&gcc GMAC_CORE1_RESET>; ++ reset-names = "stmmaceth"; ++ clocks = <&gcc GMAC_CORE1_CLK>; ++ clock-names = "stmmaceth"; ++ ++ status = "disabled"; ++ }; ++ ++ gmac0: ethernet@37000000 { ++ device_type = "network"; ++ compatible = "qcom,ipq806x-gmac"; ++ reg = <0x37000000 0x200000>; ++ interrupts = ; ++ interrupt-names = "macirq"; ++ ++ snps,axi-config = <&stmmac_axi_setup>; ++ snps,pbl = <32>; ++ snps,aal = <1>; ++ ++ qcom,nss-common = <&nss_common>; ++ qcom,qsgmii-csr = <&qsgmii_csr>; ++ ++ clocks = <&gcc GMAC_CORE1_CLK>; ++ clock-names = "stmmaceth"; ++ ++ resets = <&gcc GMAC_CORE1_RESET>; ++ reset-names = "stmmaceth"; ++ ++ status = "disabled"; ++ }; ++ ++ gmac1: ethernet@37200000 { ++ device_type = "network"; ++ compatible = "qcom,ipq806x-gmac"; ++ reg = <0x37200000 0x200000>; ++ interrupts = ; ++ interrupt-names = "macirq"; ++ ++ snps,axi-config = <&stmmac_axi_setup>; ++ snps,pbl = <32>; ++ snps,aal = <1>; ++ ++ qcom,nss-common = <&nss_common>; ++ qcom,qsgmii-csr = <&qsgmii_csr>; ++ ++ clocks = <&gcc GMAC_CORE2_CLK>; ++ clock-names = "stmmaceth"; ++ ++ resets = <&gcc GMAC_CORE2_RESET>; ++ reset-names = "stmmaceth"; ++ ++ status = "disabled"; ++ }; ++ ++ gmac2: ethernet@37400000 { ++ device_type = "network"; ++ compatible = "qcom,ipq806x-gmac", "snps,dwmac"; ++ reg = <0x37400000 0x200000>; ++ interrupts = ; ++ interrupt-names = "macirq"; ++ ++ snps,axi-config = <&stmmac_axi_setup>; ++ snps,pbl = <32>; ++ snps,aal = <1>; ++ ++ qcom,nss-common = <&nss_common>; ++ qcom,qsgmii-csr = <&qsgmii_csr>; ++ ++ clocks = <&gcc GMAC_CORE3_CLK>; ++ clock-names = "stmmaceth"; ++ ++ resets = <&gcc GMAC_CORE3_RESET>; ++ reset-names = "stmmaceth"; ++ ++ status = "disabled"; ++ }; ++ ++ gmac3: ethernet@37600000 { ++ device_type = "network"; ++ compatible = "qcom,ipq806x-gmac", "snps,dwmac"; ++ reg = <0x37600000 0x200000>; ++ interrupts = ; ++ interrupt-names = "macirq"; ++ ++ snps,axi-config = <&stmmac_axi_setup>; ++ snps,pbl = <32>; ++ snps,aal = <1>; ++ ++ qcom,nss-common = <&nss_common>; ++ qcom,qsgmii-csr = <&qsgmii_csr>; ++ ++ clocks = <&gcc GMAC_CORE4_CLK>; ++ clock-names = "stmmaceth"; ++ ++ resets = <&gcc GMAC_CORE4_RESET>; ++ reset-names = "stmmaceth"; ++ ++ status = "disabled"; ++ }; ++ + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; +@@ -676,4 +1559,17 @@ + }; + }; + }; ++ ++ sfpb_mutex: sfpb-mutex { ++ compatible = "qcom,sfpb-mutex"; ++ syscon = <&sfpb_mutex_block 4 4>; ++ ++ #hwlock-cells = <1>; ++ }; ++ ++ smem { ++ compatible = "qcom,smem"; ++ memory-region = <&smem>; ++ hwlocks = <&sfpb_mutex 3>; ++ }; + }; diff --git a/target/linux/ipq806x/patches-5.10/084-ipq8064-v1.0-dtsi-cleanup.patch b/target/linux/ipq806x/patches-5.10/084-ipq8064-v1.0-dtsi-cleanup.patch new file mode 100644 index 0000000000..e5ea8e6393 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/084-ipq8064-v1.0-dtsi-cleanup.patch @@ -0,0 +1,89 @@ +This uses upstream qcom-ipq8064-v1.0.dtsi and modifies it by patches +instead of keeping a local version. +We drop partitions, LEDs and keys from the file as we will implement +them differently anyway. + +--- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi +@@ -42,16 +42,6 @@ + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; +- +- partition@0 { +- label = "rootfs"; +- reg = <0x0 0x1000000>; +- }; +- +- partition@1 { +- label = "scratch"; +- reg = <0x1000000 0x1000000>; +- }; + }; + }; + }; +@@ -64,64 +54,5 @@ + ports-implemented = <0x1>; + status = "ok"; + }; +- +- gpio_keys { +- compatible = "gpio-keys"; +- pinctrl-0 = <&buttons_pins>; +- pinctrl-names = "default"; +- +- button@1 { +- label = "reset"; +- linux,code = ; +- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; +- linux,input-type = <1>; +- debounce-interval = <60>; +- }; +- button@2 { +- label = "wps"; +- linux,code = ; +- gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; +- linux,input-type = <1>; +- debounce-interval = <60>; +- }; +- }; +- +- leds { +- compatible = "gpio-leds"; +- pinctrl-0 = <&leds_pins>; +- pinctrl-names = "default"; +- +- led@7 { +- label = "led_usb1"; +- gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "usbdev"; +- default-state = "off"; +- }; +- +- led@8 { +- label = "led_usb3"; +- gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "usbdev"; +- default-state = "off"; +- }; +- +- led@9 { +- label = "status_led_fail"; +- gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; +- default-state = "off"; +- }; +- +- led@26 { +- label = "sata_led"; +- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; +- default-state = "off"; +- }; +- +- led@53 { +- label = "status_led_pass"; +- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; +- default-state = "off"; +- }; +- }; + }; + }; diff --git a/target/linux/ipq806x/patches-5.10/085-ipq8064-v1.0-dtsi-additions.patch b/target/linux/ipq806x/patches-5.10/085-ipq8064-v1.0-dtsi-additions.patch new file mode 100644 index 0000000000..58f6a46e4f --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/085-ipq8064-v1.0-dtsi-additions.patch @@ -0,0 +1,14 @@ +This uses upstream qcom-ipq8064-v1.0.dtsi and modifies it by patches +instead of keeping a local version. This patch adds our local adjustments +for the (local) additional contents of qcom-ipq8064.dtsi + +--- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi +@@ -56,3 +56,7 @@ + }; + }; + }; ++ ++&CPU_SPC { ++ status = "okay"; ++}; diff --git a/target/linux/ipq806x/patches-5.10/086-v5.8-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch b/target/linux/ipq806x/patches-5.10/086-v5.8-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch new file mode 100644 index 0000000000..2b5171fc54 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/086-v5.8-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch @@ -0,0 +1,104 @@ +From 13bec8d49bdf10aab4e1570ef42417f6bfbb6126 Mon Sep 17 00:00:00 2001 +From: Ajay Kishore +Date: Fri, 27 Mar 2020 23:32:08 +0100 +Subject: pinctrl: qcom: use scm_call to route GPIO irq to Apps + +For IPQ806x targets, TZ protects the registers that are used to +configure the routing of interrupts to a target processor. +To resolve this, this patch uses scm call to route GPIO interrupts +to application processor. Also the scm call interface is changed. + +Signed-off-by: Ajay Kishore +Signed-off-by: Ansuel Smith +Link: https://lore.kernel.org/r/20200327223209.20409-1-ansuelsmth@gmail.com +Reviewed-by: Bjorn Andersson +Signed-off-by: Linus Walleij +--- + drivers/pinctrl/qcom/pinctrl-msm.c | 43 ++++++++++++++++++++++++++++++++------ + 1 file changed, 37 insertions(+), 6 deletions(-) + +(limited to 'drivers/pinctrl/qcom/pinctrl-msm.c') + +--- a/drivers/pinctrl/qcom/pinctrl-msm.c ++++ b/drivers/pinctrl/qcom/pinctrl-msm.c +@@ -22,6 +22,8 @@ + #include + #include + #include ++#include ++#include + + #include "../core.h" + #include "../pinconf.h" +@@ -57,6 +59,8 @@ struct msm_pinctrl { + struct irq_chip irq_chip; + int irq; + ++ bool intr_target_use_scm; ++ + raw_spinlock_t lock; + + DECLARE_BITMAP(dual_edge_irqs, MAX_NR_GPIO); +@@ -64,6 +68,7 @@ struct msm_pinctrl { + + const struct msm_pinctrl_soc_data *soc; + void __iomem *regs[MAX_NR_TILES]; ++ u32 phys_base[MAX_NR_TILES]; + }; + + #define MSM_ACCESSOR(name) \ +@@ -832,11 +837,30 @@ static int msm_gpio_irq_set_type(struct + else + clear_bit(d->hwirq, pctrl->dual_edge_irqs); + +- /* Route interrupts to application cpu */ +- val = msm_readl_intr_target(pctrl, g); +- val &= ~(7 << g->intr_target_bit); +- val |= g->intr_target_kpss_val << g->intr_target_bit; +- msm_writel_intr_target(val, pctrl, g); ++ /* Route interrupts to application cpu. ++ * With intr_target_use_scm interrupts are routed to ++ * application cpu using scm calls. ++ */ ++ if (pctrl->intr_target_use_scm) { ++ u32 addr = pctrl->phys_base[0] + g->intr_target_reg; ++ int ret; ++ ++ qcom_scm_io_readl(addr, &val); ++ ++ val &= ~(7 << g->intr_target_bit); ++ val |= g->intr_target_kpss_val << g->intr_target_bit; ++ ++ ret = qcom_scm_io_writel(addr, val); ++ if (ret) ++ dev_err(pctrl->dev, ++ "Failed routing %lu interrupt to Apps proc", ++ d->hwirq); ++ } else { ++ val = msm_readl_intr_target(pctrl, g); ++ val &= ~(7 << g->intr_target_bit); ++ val |= g->intr_target_kpss_val << g->intr_target_bit; ++ msm_writel_intr_target(val, pctrl, g); ++ } + + /* Update configuration for gpio. + * RAW_STATUS_EN is left on for all gpio irqs. Due to the +@@ -1138,6 +1162,9 @@ int msm_pinctrl_probe(struct platform_de + pctrl->dev = &pdev->dev; + pctrl->soc = soc_data; + pctrl->chip = msm_gpio_template; ++ pctrl->intr_target_use_scm = of_device_is_compatible( ++ pctrl->dev->of_node, ++ "qcom,ipq8064-pinctrl"); + + raw_spin_lock_init(&pctrl->lock); + +@@ -1154,6 +1181,8 @@ int msm_pinctrl_probe(struct platform_de + pctrl->regs[0] = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(pctrl->regs[0])) + return PTR_ERR(pctrl->regs[0]); ++ ++ pctrl->phys_base[0] = res->start; + } + + msm_pinctrl_setup_pm_reset(pctrl); diff --git a/target/linux/ipq806x/patches-5.10/087-v5.8-ipq8064-pinctrl-Fixed-missing-RGMII-pincontrol-defin.patch b/target/linux/ipq806x/patches-5.10/087-v5.8-ipq8064-pinctrl-Fixed-missing-RGMII-pincontrol-defin.patch new file mode 100644 index 0000000000..612c33cd0e --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/087-v5.8-ipq8064-pinctrl-Fixed-missing-RGMII-pincontrol-defin.patch @@ -0,0 +1,56 @@ +From 8d8cec9bf6e9260397872785f249dfb59a417d08 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Wed, 19 Feb 2020 18:59:39 +0100 +Subject: ipq8064: pinctrl: Fixed missing RGMII pincontrol definitions + +Add missing gpio definition for mdio and rgmii2. + +Signed-off-by: Ram Chandra Jangir +Signed-off-by: Ansuel Smith +Link: https://lore.kernel.org/r/20200219175940.744-1-ansuelsmth@gmail.com +Acked-by: Bjorn Andersson +Signed-off-by: Linus Walleij +--- + drivers/pinctrl/qcom/pinctrl-ipq8064.c | 10 +++++----- + 1 file changed, 5 insertions(+), 5 deletions(-) + +--- a/drivers/pinctrl/qcom/pinctrl-ipq8064.c ++++ b/drivers/pinctrl/qcom/pinctrl-ipq8064.c +@@ -299,7 +299,7 @@ static const char * const gpio_groups[] + }; + + static const char * const mdio_groups[] = { +- "gpio0", "gpio1", "gpio10", "gpio11", ++ "gpio0", "gpio1", "gpio2", "gpio10", "gpio11", "gpio66", + }; + + static const char * const mi2s_groups[] = { +@@ -403,8 +403,8 @@ static const char * const usb2_hsic_grou + }; + + static const char * const rgmii2_groups[] = { +- "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", +- "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62", ++ "gpio2", "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", ++ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62", "gpio66", + }; + + static const char * const sata_groups[] = { +@@ -539,7 +539,7 @@ static const struct msm_function ipq8064 + static const struct msm_pingroup ipq8064_groups[] = { + PINGROUP(0, mdio, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(1, mdio, NA, NA, NA, NA, NA, NA, NA, NA, NA), +- PINGROUP(2, gsbi5_spi_cs3, NA, NA, NA, NA, NA, NA, NA, NA, NA), ++ PINGROUP(2, gsbi5_spi_cs3, rgmii2, mdio, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(3, pcie1_rst, pcie1_prsnt, pdm, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(4, pcie1_pwren_n, pcie1_pwren, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(5, pcie1_clk_req, pcie1_pwrflt, NA, NA, NA, NA, NA, NA, NA, NA), +@@ -603,7 +603,7 @@ static const struct msm_pingroup ipq8064 + PINGROUP(63, pcie3_rst, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(64, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(65, pcie3_clk_req, NA, NA, NA, NA, NA, NA, NA, NA, NA), +- PINGROUP(66, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), ++ PINGROUP(66, rgmii2, mdio, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(67, usb2_hsic, NA, NA, NA, NA, NA, NA, NA, NA, NA), + PINGROUP(68, usb2_hsic, NA, NA, NA, NA, NA, NA, NA, NA, NA), + SDC_PINGROUP(sdc3_clk, 0x204a, 14, 6), diff --git a/target/linux/ipq806x/patches-5.10/088-v5.8-watchdog-qcom-wdt-disable-pretimeout-on-timer-platfo.patch b/target/linux/ipq806x/patches-5.10/088-v5.8-watchdog-qcom-wdt-disable-pretimeout-on-timer-platfo.patch new file mode 100644 index 0000000000..605eb7d07b --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/088-v5.8-watchdog-qcom-wdt-disable-pretimeout-on-timer-platfo.patch @@ -0,0 +1,98 @@ +From 000de5417107623925a4cf0310579f744ff43c28 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Tue, 4 Feb 2020 20:56:48 +0100 +Subject: watchdog: qcom-wdt: disable pretimeout on timer platform + +Some platform like ipq806x doesn't support pretimeout and define +some interrupts used by qcom,msm-timer. Change the driver to check +and use pretimeout only on qcom,kpss-wdt as it's the only platform +that actually supports it. + +Signed-off-by: Ansuel Smith +Reviewed-by: Guenter Roeck +Link: https://lore.kernel.org/r/20200204195648.23350-1-ansuelsmth@gmail.com +[groeck: Conflict resolution] +Signed-off-by: Guenter Roeck +Signed-off-by: Wim Van Sebroeck +--- + drivers/watchdog/qcom-wdt.c | 31 +++++++++++++++++++++++-------- + 1 file changed, 23 insertions(+), 8 deletions(-) + +--- a/drivers/watchdog/qcom-wdt.c ++++ b/drivers/watchdog/qcom-wdt.c +@@ -40,6 +40,11 @@ static const u32 reg_offset_data_kpss[] + [WDT_BITE_TIME] = 0x14, + }; + ++struct qcom_wdt_match_data { ++ const u32 *offset; ++ bool pretimeout; ++}; ++ + struct qcom_wdt { + struct watchdog_device wdd; + unsigned long rate; +@@ -179,19 +184,29 @@ static void qcom_clk_disable_unprepare(v + clk_disable_unprepare(data); + } + ++static const struct qcom_wdt_match_data match_data_apcs_tmr = { ++ .offset = reg_offset_data_apcs_tmr, ++ .pretimeout = false, ++}; ++ ++static const struct qcom_wdt_match_data match_data_kpss = { ++ .offset = reg_offset_data_kpss, ++ .pretimeout = true, ++}; ++ + static int qcom_wdt_probe(struct platform_device *pdev) + { + struct device *dev = &pdev->dev; + struct qcom_wdt *wdt; + struct resource *res; + struct device_node *np = dev->of_node; +- const u32 *regs; ++ const struct qcom_wdt_match_data *data; + u32 percpu_offset; + int irq, ret; + struct clk *clk; + +- regs = of_device_get_match_data(dev); +- if (!regs) { ++ data = of_device_get_match_data(dev); ++ if (!data) { + dev_err(dev, "Unsupported QCOM WDT module\n"); + return -ENODEV; + } +@@ -247,7 +262,7 @@ static int qcom_wdt_probe(struct platfor + + /* check if there is pretimeout support */ + irq = platform_get_irq_optional(pdev, 0); +- if (irq > 0) { ++ if (data->pretimeout && irq > 0) { + ret = devm_request_irq(dev, irq, qcom_wdt_isr, + IRQF_TRIGGER_RISING, + "wdt_bark", &wdt->wdd); +@@ -267,7 +282,7 @@ static int qcom_wdt_probe(struct platfor + wdt->wdd.min_timeout = 1; + wdt->wdd.max_timeout = 0x10000000U / wdt->rate; + wdt->wdd.parent = dev; +- wdt->layout = regs; ++ wdt->layout = data->offset; + + if (readl(wdt_addr(wdt, WDT_STS)) & 1) + wdt->wdd.bootstatus = WDIOF_CARDRESET; +@@ -311,9 +326,9 @@ static int __maybe_unused qcom_wdt_resum + static SIMPLE_DEV_PM_OPS(qcom_wdt_pm_ops, qcom_wdt_suspend, qcom_wdt_resume); + + static const struct of_device_id qcom_wdt_of_table[] = { +- { .compatible = "qcom,kpss-timer", .data = reg_offset_data_apcs_tmr }, +- { .compatible = "qcom,scss-timer", .data = reg_offset_data_apcs_tmr }, +- { .compatible = "qcom,kpss-wdt", .data = reg_offset_data_kpss }, ++ { .compatible = "qcom,kpss-timer", .data = &match_data_apcs_tmr }, ++ { .compatible = "qcom,scss-timer", .data = &match_data_apcs_tmr }, ++ { .compatible = "qcom,kpss-wdt", .data = &match_data_kpss }, + { }, + }; + MODULE_DEVICE_TABLE(of, qcom_wdt_of_table); diff --git a/target/linux/ipq806x/patches-5.10/089-v5.8-ipq806x-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch b/target/linux/ipq806x/patches-5.10/089-v5.8-ipq806x-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch new file mode 100644 index 0000000000..015a917e20 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/089-v5.8-ipq806x-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch @@ -0,0 +1,28 @@ +From 1aec193ea41d672d11592714cdda8167eb3b38fc Mon Sep 17 00:00:00 2001 +From: Abhishek Sahu +Date: Wed, 18 Mar 2020 14:16:56 +0100 +Subject: ipq806x: gcc: Added the enable regs and mask for PRNG + +Kernel got hanged while reading from /dev/hwrng at the +time of PRNG clock enable + +Fixes: 24d8fba44af3 "clk: qcom: Add support for IPQ8064's global clock controller (GCC)" +Signed-off-by: Abhishek Sahu +Signed-off-by: Ansuel Smith +Link: https://lkml.kernel.org/r/20200318131657.345-1-ansuelsmth@gmail.com +Signed-off-by: Stephen Boyd +--- + drivers/clk/qcom/gcc-ipq806x.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/clk/qcom/gcc-ipq806x.c ++++ b/drivers/clk/qcom/gcc-ipq806x.c +@@ -1225,6 +1225,8 @@ static struct clk_rcg prng_src = { + .parent_map = gcc_pxo_pll8_map, + }, + .clkr = { ++ .enable_reg = 0x2e80, ++ .enable_mask = BIT(11), + .hw.init = &(struct clk_init_data){ + .name = "prng_src", + .parent_names = gcc_pxo_pll8, diff --git a/target/linux/ipq806x/patches-5.10/090-v5.8-clk-clk-rpm-fixes.patch b/target/linux/ipq806x/patches-5.10/090-v5.8-clk-clk-rpm-fixes.patch new file mode 100644 index 0000000000..a28570974e --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/090-v5.8-clk-clk-rpm-fixes.patch @@ -0,0 +1,90 @@ +From eec152734be10c72d2d413a27ca9d282c28cdb61 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Tue, 10 Mar 2020 15:37:56 +0100 +Subject: clk: qcom: clk-rpm: add missing rpm clk for ipq806x + +Add missing definition of rpm clk for ipq806x soc + +Signed-off-by: John Crispin +Signed-off-by: Ansuel Smith +Acked-by: John Crispin +Reviewed-by: Rob Herring +Link: https://lkml.kernel.org/r/20200310143756.244-1-ansuelsmth@gmail.com +Signed-off-by: Stephen Boyd +--- + .../devicetree/bindings/clock/qcom,rpmcc.txt | 1 + + drivers/clk/qcom/clk-rpm.c | 35 ++++++++++++++++++++++ + include/dt-bindings/clock/qcom,rpmcc.h | 4 +++ + 3 files changed, 40 insertions(+) + +--- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt ++++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt +@@ -15,6 +15,7 @@ Required properties : + "qcom,rpmcc-msm8916", "qcom,rpmcc" + "qcom,rpmcc-msm8974", "qcom,rpmcc" + "qcom,rpmcc-apq8064", "qcom,rpmcc" ++ "qcom,rpmcc-ipq806x", "qcom,rpmcc" + "qcom,rpmcc-msm8996", "qcom,rpmcc" + "qcom,rpmcc-msm8998", "qcom,rpmcc" + "qcom,rpmcc-qcs404", "qcom,rpmcc" +--- a/drivers/clk/qcom/clk-rpm.c ++++ b/drivers/clk/qcom/clk-rpm.c +@@ -543,10 +543,45 @@ static const struct rpm_clk_desc rpm_clk + .num_clks = ARRAY_SIZE(apq8064_clks), + }; + ++/* ipq806x */ ++DEFINE_CLK_RPM(ipq806x, afab_clk, afab_a_clk, QCOM_RPM_APPS_FABRIC_CLK); ++DEFINE_CLK_RPM(ipq806x, cfpb_clk, cfpb_a_clk, QCOM_RPM_CFPB_CLK); ++DEFINE_CLK_RPM(ipq806x, daytona_clk, daytona_a_clk, QCOM_RPM_DAYTONA_FABRIC_CLK); ++DEFINE_CLK_RPM(ipq806x, ebi1_clk, ebi1_a_clk, QCOM_RPM_EBI1_CLK); ++DEFINE_CLK_RPM(ipq806x, sfab_clk, sfab_a_clk, QCOM_RPM_SYS_FABRIC_CLK); ++DEFINE_CLK_RPM(ipq806x, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK); ++DEFINE_CLK_RPM(ipq806x, nss_fabric_0_clk, nss_fabric_0_a_clk, QCOM_RPM_NSS_FABRIC_0_CLK); ++DEFINE_CLK_RPM(ipq806x, nss_fabric_1_clk, nss_fabric_1_a_clk, QCOM_RPM_NSS_FABRIC_1_CLK); ++ ++static struct clk_rpm *ipq806x_clks[] = { ++ [RPM_APPS_FABRIC_CLK] = &ipq806x_afab_clk, ++ [RPM_APPS_FABRIC_A_CLK] = &ipq806x_afab_a_clk, ++ [RPM_CFPB_CLK] = &ipq806x_cfpb_clk, ++ [RPM_CFPB_A_CLK] = &ipq806x_cfpb_a_clk, ++ [RPM_DAYTONA_FABRIC_CLK] = &ipq806x_daytona_clk, ++ [RPM_DAYTONA_FABRIC_A_CLK] = &ipq806x_daytona_a_clk, ++ [RPM_EBI1_CLK] = &ipq806x_ebi1_clk, ++ [RPM_EBI1_A_CLK] = &ipq806x_ebi1_a_clk, ++ [RPM_SYS_FABRIC_CLK] = &ipq806x_sfab_clk, ++ [RPM_SYS_FABRIC_A_CLK] = &ipq806x_sfab_a_clk, ++ [RPM_SFPB_CLK] = &ipq806x_sfpb_clk, ++ [RPM_SFPB_A_CLK] = &ipq806x_sfpb_a_clk, ++ [RPM_NSS_FABRIC_0_CLK] = &ipq806x_nss_fabric_0_clk, ++ [RPM_NSS_FABRIC_0_A_CLK] = &ipq806x_nss_fabric_0_a_clk, ++ [RPM_NSS_FABRIC_1_CLK] = &ipq806x_nss_fabric_1_clk, ++ [RPM_NSS_FABRIC_1_A_CLK] = &ipq806x_nss_fabric_1_a_clk, ++}; ++ ++static const struct rpm_clk_desc rpm_clk_ipq806x = { ++ .clks = ipq806x_clks, ++ .num_clks = ARRAY_SIZE(ipq806x_clks), ++}; ++ + static const struct of_device_id rpm_clk_match_table[] = { + { .compatible = "qcom,rpmcc-msm8660", .data = &rpm_clk_msm8660 }, + { .compatible = "qcom,rpmcc-apq8060", .data = &rpm_clk_msm8660 }, + { .compatible = "qcom,rpmcc-apq8064", .data = &rpm_clk_apq8064 }, ++ { .compatible = "qcom,rpmcc-ipq806x", .data = &rpm_clk_ipq806x }, + { } + }; + MODULE_DEVICE_TABLE(of, rpm_clk_match_table); +--- a/include/dt-bindings/clock/qcom,rpmcc.h ++++ b/include/dt-bindings/clock/qcom,rpmcc.h +@@ -37,6 +37,10 @@ + #define RPM_XO_A0 27 + #define RPM_XO_A1 28 + #define RPM_XO_A2 29 ++#define RPM_NSS_FABRIC_0_CLK 30 ++#define RPM_NSS_FABRIC_0_A_CLK 31 ++#define RPM_NSS_FABRIC_1_CLK 32 ++#define RPM_NSS_FABRIC_1_A_CLK 33 + + /* SMD RPM clocks */ + #define RPM_SMD_XO_CLK_SRC 0 diff --git a/target/linux/ipq806x/patches-5.10/091-v5.8-regulator-add-smb208-support.patch b/target/linux/ipq806x/patches-5.10/091-v5.8-regulator-add-smb208-support.patch new file mode 100644 index 0000000000..42a02865a3 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/091-v5.8-regulator-add-smb208-support.patch @@ -0,0 +1,63 @@ +From b5f25304aece9f2e7eaab275bbb5461c666bf38c Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Wed, 19 Feb 2020 17:37:11 +0100 +Subject: regulator: add smb208 support + +Smb208 regulators are used on some ipq806x soc. +Add support for it to make it avaiable on some routers +that use it. + +Signed-off-by: Ansuel Smith +Signed-off-by: Adrian Panella +Acked-by: Lee Jones +Link: https://lore.kernel.org/r/20200219163711.479-1-ansuelsmth@gmail.com +Signed-off-by: Mark Brown +--- + Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 4 ++++ + drivers/regulator/qcom_rpm-regulator.c | 9 +++++++++ + 2 files changed, 13 insertions(+) + +--- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt ++++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt +@@ -61,6 +61,7 @@ Regulator nodes are identified by their + "qcom,rpm-pm8901-regulators" + "qcom,rpm-pm8921-regulators" + "qcom,rpm-pm8018-regulators" ++ "qcom,rpm-smb208-regulators" + + - vdd_l0_l1_lvs-supply: + - vdd_l2_l11_l12-supply: +@@ -171,6 +172,9 @@ pm8018: + s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, + l12, l14, lvs1 + ++smb208: ++ s1a, s1b, s2a, s2b ++ + The content of each sub-node is defined by the standard binding for regulators - + see regulator.txt - with additional custom properties described below: + +--- a/drivers/regulator/qcom_rpm-regulator.c ++++ b/drivers/regulator/qcom_rpm-regulator.c +@@ -925,12 +925,21 @@ static const struct rpm_regulator_data r + { } + }; + ++static const struct rpm_regulator_data rpm_smb208_regulators[] = { ++ { "s1a", QCOM_RPM_SMB208_S1a, &smb208_smps, "vin_s1a" }, ++ { "s1b", QCOM_RPM_SMB208_S1b, &smb208_smps, "vin_s1b" }, ++ { "s2a", QCOM_RPM_SMB208_S2a, &smb208_smps, "vin_s2a" }, ++ { "s2b", QCOM_RPM_SMB208_S2b, &smb208_smps, "vin_s2b" }, ++ { } ++}; ++ + static const struct of_device_id rpm_of_match[] = { + { .compatible = "qcom,rpm-pm8018-regulators", + .data = &rpm_pm8018_regulators }, + { .compatible = "qcom,rpm-pm8058-regulators", .data = &rpm_pm8058_regulators }, + { .compatible = "qcom,rpm-pm8901-regulators", .data = &rpm_pm8901_regulators }, + { .compatible = "qcom,rpm-pm8921-regulators", .data = &rpm_pm8921_regulators }, ++ { .compatible = "qcom,rpm-smb208-regulators", .data = &rpm_smb208_regulators }, + { } + }; + MODULE_DEVICE_TABLE(of, rpm_of_match); diff --git a/target/linux/ipq806x/patches-5.10/092-1-v5.7-qcom-cpufreq-nvmem-Add-support-for-krait-based-socs.patch b/target/linux/ipq806x/patches-5.10/092-1-v5.7-qcom-cpufreq-nvmem-Add-support-for-krait-based-socs.patch new file mode 100644 index 0000000000..be20756a10 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/092-1-v5.7-qcom-cpufreq-nvmem-Add-support-for-krait-based-socs.patch @@ -0,0 +1,361 @@ +From a8811ec764f95a04ba82f6f457e28c5e9e36e36b Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 13 Mar 2020 18:52:13 +0100 +Subject: cpufreq: qcom: Add support for krait based socs + +In Certain QCOM SoCs like ipq8064, apq8064, msm8960, msm8974 +that has KRAIT processors the voltage/current value of each OPP +varies based on the silicon variant in use. + +The required OPP related data is determined based on +the efuse value. This is similar to the existing code for +kryo cores. So adding support for krait cores here. + +Signed-off-by: Sricharan R +Signed-off-by: Ansuel Smith +Signed-off-by: Viresh Kumar +--- + .../devicetree/bindings/opp/qcom-nvmem-cpufreq.txt | 3 +- + drivers/cpufreq/Kconfig.arm | 2 +- + drivers/cpufreq/cpufreq-dt-platdev.c | 5 + + drivers/cpufreq/qcom-cpufreq-nvmem.c | 191 +++++++++++++++++++-- + 4 files changed, 183 insertions(+), 18 deletions(-) + +--- a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt ++++ b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt +@@ -19,7 +19,8 @@ In 'cpu' nodes: + + In 'operating-points-v2' table: + - compatible: Should be +- - 'operating-points-v2-kryo-cpu' for apq8096 and msm8996. ++ - 'operating-points-v2-kryo-cpu' for apq8096, msm8996, msm8974, ++ apq8064, ipq8064, msm8960 and ipq8074. + + Optional properties: + -------------------- +--- a/drivers/cpufreq/Kconfig.arm ++++ b/drivers/cpufreq/Kconfig.arm +@@ -135,7 +135,7 @@ config ARM_OMAP2PLUS_CPUFREQ + + config ARM_QCOM_CPUFREQ_NVMEM + tristate "Qualcomm nvmem based CPUFreq" +- depends on ARM64 ++ depends on ARCH_QCOM + depends on QCOM_QFPROM + depends on QCOM_SMEM + select PM_OPP +--- a/drivers/cpufreq/cpufreq-dt-platdev.c ++++ b/drivers/cpufreq/cpufreq-dt-platdev.c +@@ -138,6 +138,11 @@ static const struct of_device_id blackli + { .compatible = "ti,am43", }, + { .compatible = "ti,dra7", }, + ++ { .compatible = "qcom,ipq8064", }, ++ { .compatible = "qcom,apq8064", }, ++ { .compatible = "qcom,msm8974", }, ++ { .compatible = "qcom,msm8960", }, ++ + { } + }; + +--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c ++++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c +@@ -49,12 +49,14 @@ struct qcom_cpufreq_drv; + struct qcom_cpufreq_match_data { + int (*get_version)(struct device *cpu_dev, + struct nvmem_cell *speedbin_nvmem, ++ char **pvs_name, + struct qcom_cpufreq_drv *drv); + const char **genpd_names; + }; + + struct qcom_cpufreq_drv { +- struct opp_table **opp_tables; ++ struct opp_table **names_opp_tables; ++ struct opp_table **hw_opp_tables; + struct opp_table **genpd_opp_tables; + u32 versions; + const struct qcom_cpufreq_match_data *data; +@@ -62,6 +64,84 @@ struct qcom_cpufreq_drv { + + static struct platform_device *cpufreq_dt_pdev, *cpufreq_pdev; + ++static void get_krait_bin_format_a(struct device *cpu_dev, ++ int *speed, int *pvs, int *pvs_ver, ++ struct nvmem_cell *pvs_nvmem, u8 *buf) ++{ ++ u32 pte_efuse; ++ ++ pte_efuse = *((u32 *)buf); ++ ++ *speed = pte_efuse & 0xf; ++ if (*speed == 0xf) ++ *speed = (pte_efuse >> 4) & 0xf; ++ ++ if (*speed == 0xf) { ++ *speed = 0; ++ dev_warn(cpu_dev, "Speed bin: Defaulting to %d\n", *speed); ++ } else { ++ dev_dbg(cpu_dev, "Speed bin: %d\n", *speed); ++ } ++ ++ *pvs = (pte_efuse >> 10) & 0x7; ++ if (*pvs == 0x7) ++ *pvs = (pte_efuse >> 13) & 0x7; ++ ++ if (*pvs == 0x7) { ++ *pvs = 0; ++ dev_warn(cpu_dev, "PVS bin: Defaulting to %d\n", *pvs); ++ } else { ++ dev_dbg(cpu_dev, "PVS bin: %d\n", *pvs); ++ } ++} ++ ++static void get_krait_bin_format_b(struct device *cpu_dev, ++ int *speed, int *pvs, int *pvs_ver, ++ struct nvmem_cell *pvs_nvmem, u8 *buf) ++{ ++ u32 pte_efuse, redundant_sel; ++ ++ pte_efuse = *((u32 *)buf); ++ redundant_sel = (pte_efuse >> 24) & 0x7; ++ ++ *pvs_ver = (pte_efuse >> 4) & 0x3; ++ ++ switch (redundant_sel) { ++ case 1: ++ *pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7); ++ *speed = (pte_efuse >> 27) & 0xf; ++ break; ++ case 2: ++ *pvs = (pte_efuse >> 27) & 0xf; ++ *speed = pte_efuse & 0x7; ++ break; ++ default: ++ /* 4 bits of PVS are in efuse register bits 31, 8-6. */ ++ *pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7); ++ *speed = pte_efuse & 0x7; ++ } ++ ++ /* Check SPEED_BIN_BLOW_STATUS */ ++ if (pte_efuse & BIT(3)) { ++ dev_dbg(cpu_dev, "Speed bin: %d\n", *speed); ++ } else { ++ dev_warn(cpu_dev, "Speed bin not set. Defaulting to 0!\n"); ++ *speed = 0; ++ } ++ ++ /* Check PVS_BLOW_STATUS */ ++ pte_efuse = *(((u32 *)buf) + 4); ++ pte_efuse &= BIT(21); ++ if (pte_efuse) { ++ dev_dbg(cpu_dev, "PVS bin: %d\n", *pvs); ++ } else { ++ dev_warn(cpu_dev, "PVS bin not set. Defaulting to 0!\n"); ++ *pvs = 0; ++ } ++ ++ dev_dbg(cpu_dev, "PVS version: %d\n", *pvs_ver); ++} ++ + static enum _msm8996_version qcom_cpufreq_get_msm_id(void) + { + size_t len; +@@ -93,11 +173,13 @@ static enum _msm8996_version qcom_cpufre + + static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev, + struct nvmem_cell *speedbin_nvmem, ++ char **pvs_name, + struct qcom_cpufreq_drv *drv) + { + size_t len; + u8 *speedbin; + enum _msm8996_version msm8996_version; ++ *pvs_name = NULL; + + msm8996_version = qcom_cpufreq_get_msm_id(); + if (NUM_OF_MSM8996_VERSIONS == msm8996_version) { +@@ -125,10 +207,51 @@ static int qcom_cpufreq_kryo_name_versio + return 0; + } + ++static int qcom_cpufreq_krait_name_version(struct device *cpu_dev, ++ struct nvmem_cell *speedbin_nvmem, ++ char **pvs_name, ++ struct qcom_cpufreq_drv *drv) ++{ ++ int speed = 0, pvs = 0, pvs_ver = 0; ++ u8 *speedbin; ++ size_t len; ++ ++ speedbin = nvmem_cell_read(speedbin_nvmem, &len); ++ ++ if (IS_ERR(speedbin)) ++ return PTR_ERR(speedbin); ++ ++ switch (len) { ++ case 4: ++ get_krait_bin_format_a(cpu_dev, &speed, &pvs, &pvs_ver, ++ speedbin_nvmem, speedbin); ++ break; ++ case 8: ++ get_krait_bin_format_b(cpu_dev, &speed, &pvs, &pvs_ver, ++ speedbin_nvmem, speedbin); ++ break; ++ default: ++ dev_err(cpu_dev, "Unable to read nvmem data. Defaulting to 0!\n"); ++ return -ENODEV; ++ } ++ ++ snprintf(*pvs_name, sizeof("speedXX-pvsXX-vXX"), "speed%d-pvs%d-v%d", ++ speed, pvs, pvs_ver); ++ ++ drv->versions = (1 << speed); ++ ++ kfree(speedbin); ++ return 0; ++} ++ + static const struct qcom_cpufreq_match_data match_data_kryo = { + .get_version = qcom_cpufreq_kryo_name_version, + }; + ++static const struct qcom_cpufreq_match_data match_data_krait = { ++ .get_version = qcom_cpufreq_krait_name_version, ++}; ++ + static const char *qcs404_genpd_names[] = { "cpr", NULL }; + + static const struct qcom_cpufreq_match_data match_data_qcs404 = { +@@ -141,6 +264,7 @@ static int qcom_cpufreq_probe(struct pla + struct nvmem_cell *speedbin_nvmem; + struct device_node *np; + struct device *cpu_dev; ++ char *pvs_name = "speedXX-pvsXX-vXX"; + unsigned cpu; + const struct of_device_id *match; + int ret; +@@ -153,7 +277,7 @@ static int qcom_cpufreq_probe(struct pla + if (!np) + return -ENOENT; + +- ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu"); ++ ret = of_device_is_compatible(np, "operating-points-v2-qcom-cpu"); + if (!ret) { + of_node_put(np); + return -ENOENT; +@@ -181,7 +305,8 @@ static int qcom_cpufreq_probe(struct pla + goto free_drv; + } + +- ret = drv->data->get_version(cpu_dev, speedbin_nvmem, drv); ++ ret = drv->data->get_version(cpu_dev, ++ speedbin_nvmem, &pvs_name, drv); + if (ret) { + nvmem_cell_put(speedbin_nvmem); + goto free_drv; +@@ -190,12 +315,20 @@ static int qcom_cpufreq_probe(struct pla + } + of_node_put(np); + +- drv->opp_tables = kcalloc(num_possible_cpus(), sizeof(*drv->opp_tables), ++ drv->names_opp_tables = kcalloc(num_possible_cpus(), ++ sizeof(*drv->names_opp_tables), + GFP_KERNEL); +- if (!drv->opp_tables) { ++ if (!drv->names_opp_tables) { + ret = -ENOMEM; + goto free_drv; + } ++ drv->hw_opp_tables = kcalloc(num_possible_cpus(), ++ sizeof(*drv->hw_opp_tables), ++ GFP_KERNEL); ++ if (!drv->hw_opp_tables) { ++ ret = -ENOMEM; ++ goto free_opp_names; ++ } + + drv->genpd_opp_tables = kcalloc(num_possible_cpus(), + sizeof(*drv->genpd_opp_tables), +@@ -213,11 +346,23 @@ static int qcom_cpufreq_probe(struct pla + } + + if (drv->data->get_version) { +- drv->opp_tables[cpu] = +- dev_pm_opp_set_supported_hw(cpu_dev, +- &drv->versions, 1); +- if (IS_ERR(drv->opp_tables[cpu])) { +- ret = PTR_ERR(drv->opp_tables[cpu]); ++ ++ if (pvs_name) { ++ drv->names_opp_tables[cpu] = dev_pm_opp_set_prop_name( ++ cpu_dev, ++ pvs_name); ++ if (IS_ERR(drv->names_opp_tables[cpu])) { ++ ret = PTR_ERR(drv->names_opp_tables[cpu]); ++ dev_err(cpu_dev, "Failed to add OPP name %s\n", ++ pvs_name); ++ goto free_opp; ++ } ++ } ++ ++ drv->hw_opp_tables[cpu] = dev_pm_opp_set_supported_hw( ++ cpu_dev, &drv->versions, 1); ++ if (IS_ERR(drv->hw_opp_tables[cpu])) { ++ ret = PTR_ERR(drv->hw_opp_tables[cpu]); + dev_err(cpu_dev, + "Failed to set supported hardware\n"); + goto free_genpd_opp; +@@ -259,11 +404,18 @@ free_genpd_opp: + kfree(drv->genpd_opp_tables); + free_opp: + for_each_possible_cpu(cpu) { +- if (IS_ERR_OR_NULL(drv->opp_tables[cpu])) ++ if (IS_ERR_OR_NULL(drv->names_opp_tables[cpu])) ++ break; ++ dev_pm_opp_put_prop_name(drv->names_opp_tables[cpu]); ++ } ++ for_each_possible_cpu(cpu) { ++ if (IS_ERR_OR_NULL(drv->hw_opp_tables[cpu])) + break; +- dev_pm_opp_put_supported_hw(drv->opp_tables[cpu]); ++ dev_pm_opp_put_supported_hw(drv->hw_opp_tables[cpu]); + } +- kfree(drv->opp_tables); ++ kfree(drv->hw_opp_tables); ++free_opp_names: ++ kfree(drv->names_opp_tables); + free_drv: + kfree(drv); + +@@ -278,13 +430,16 @@ static int qcom_cpufreq_remove(struct pl + platform_device_unregister(cpufreq_dt_pdev); + + for_each_possible_cpu(cpu) { +- if (drv->opp_tables[cpu]) +- dev_pm_opp_put_supported_hw(drv->opp_tables[cpu]); ++ if (drv->names_opp_tables[cpu]) ++ dev_pm_opp_put_supported_hw(drv->names_opp_tables[cpu]); ++ if (drv->hw_opp_tables[cpu]) ++ dev_pm_opp_put_supported_hw(drv->hw_opp_tables[cpu]); + if (drv->genpd_opp_tables[cpu]) + dev_pm_opp_detach_genpd(drv->genpd_opp_tables[cpu]); + } + +- kfree(drv->opp_tables); ++ kfree(drv->names_opp_tables); ++ kfree(drv->hw_opp_tables); + kfree(drv->genpd_opp_tables); + kfree(drv); + +@@ -303,6 +458,10 @@ static const struct of_device_id qcom_cp + { .compatible = "qcom,apq8096", .data = &match_data_kryo }, + { .compatible = "qcom,msm8996", .data = &match_data_kryo }, + { .compatible = "qcom,qcs404", .data = &match_data_qcs404 }, ++ { .compatible = "qcom,ipq8064", .data = &match_data_krait }, ++ { .compatible = "qcom,apq8064", .data = &match_data_krait }, ++ { .compatible = "qcom,msm8974", .data = &match_data_krait }, ++ { .compatible = "qcom,msm8960", .data = &match_data_krait }, + {}, + }; + MODULE_DEVICE_TABLE(of, qcom_cpufreq_match_list); diff --git a/target/linux/ipq806x/patches-5.10/092-2-v5.7-cpufreq-qcom-fix-wrong-compatible-binding.patch b/target/linux/ipq806x/patches-5.10/092-2-v5.7-cpufreq-qcom-fix-wrong-compatible-binding.patch new file mode 100644 index 0000000000..764a917c1f --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/092-2-v5.7-cpufreq-qcom-fix-wrong-compatible-binding.patch @@ -0,0 +1,26 @@ +From 2dea651680cea1f3a29925de51002f33d1f55711 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 1 May 2020 00:22:25 +0200 +Subject: cpufreq: qcom: fix wrong compatible binding + +Binding in Documentation is still "operating-points-v2-kryo-cpu". +Restore the old binding to fix the compatibility problem. + +Fixes: a8811ec764f9 ("cpufreq: qcom: Add support for krait based socs") +Signed-off-by: Ansuel Smith +Signed-off-by: Viresh Kumar +--- + drivers/cpufreq/qcom-cpufreq-nvmem.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c ++++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c +@@ -277,7 +277,7 @@ static int qcom_cpufreq_probe(struct pla + if (!np) + return -ENOENT; + +- ret = of_device_is_compatible(np, "operating-points-v2-qcom-cpu"); ++ ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu"); + if (!ret) { + of_node_put(np); + return -ENOENT; diff --git a/target/linux/ipq806x/patches-5.10/093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch b/target/linux/ipq806x/patches-5.10/093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch new file mode 100644 index 0000000000..95531508b6 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch @@ -0,0 +1,228 @@ +From 6a114526af4689938863bf34976c83bfd279f517 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Mon, 15 Jun 2020 23:06:02 +0200 +Subject: PCI: qcom: Use bulk clk api and assert on error + +Rework 2.1.0 revision to use bulk clk api and fix missing assert on +reset_control_deassert error. + +Link: https://lore.kernel.org/r/20200615210608.21469-7-ansuelsmth@gmail.com +Signed-off-by: Ansuel Smith +Signed-off-by: Lorenzo Pieralisi +Reviewed-by: Rob Herring +Acked-by: Stanimir Varbanov +--- + drivers/pci/controller/dwc/pcie-qcom.c | 131 ++++++++++++--------------------- + 1 file changed, 46 insertions(+), 85 deletions(-) + +--- a/drivers/pci/controller/dwc/pcie-qcom.c ++++ b/drivers/pci/controller/dwc/pcie-qcom.c +@@ -99,12 +99,9 @@ + #define SLV_ADDR_SPACE_SZ 0x10000000 + + #define QCOM_PCIE_2_1_0_MAX_SUPPLY 3 ++#define QCOM_PCIE_2_1_0_MAX_CLOCKS 5 + struct qcom_pcie_resources_2_1_0 { +- struct clk *iface_clk; +- struct clk *core_clk; +- struct clk *phy_clk; +- struct clk *aux_clk; +- struct clk *ref_clk; ++ struct clk_bulk_data clks[QCOM_PCIE_2_1_0_MAX_CLOCKS]; + struct reset_control *pci_reset; + struct reset_control *axi_reset; + struct reset_control *ahb_reset; +@@ -244,25 +241,21 @@ static int qcom_pcie_get_resources_2_1_0 + if (ret) + return ret; + +- res->iface_clk = devm_clk_get(dev, "iface"); +- if (IS_ERR(res->iface_clk)) +- return PTR_ERR(res->iface_clk); +- +- res->core_clk = devm_clk_get(dev, "core"); +- if (IS_ERR(res->core_clk)) +- return PTR_ERR(res->core_clk); +- +- res->phy_clk = devm_clk_get(dev, "phy"); +- if (IS_ERR(res->phy_clk)) +- return PTR_ERR(res->phy_clk); +- +- res->aux_clk = devm_clk_get_optional(dev, "aux"); +- if (IS_ERR(res->aux_clk)) +- return PTR_ERR(res->aux_clk); +- +- res->ref_clk = devm_clk_get_optional(dev, "ref"); +- if (IS_ERR(res->ref_clk)) +- return PTR_ERR(res->ref_clk); ++ res->clks[0].id = "iface"; ++ res->clks[1].id = "core"; ++ res->clks[2].id = "phy"; ++ res->clks[3].id = "aux"; ++ res->clks[4].id = "ref"; ++ ++ /* iface, core, phy are required */ ++ ret = devm_clk_bulk_get(dev, 3, res->clks); ++ if (ret < 0) ++ return ret; ++ ++ /* aux, ref are optional */ ++ ret = devm_clk_bulk_get_optional(dev, 2, res->clks + 3); ++ if (ret < 0) ++ return ret; + + res->pci_reset = devm_reset_control_get_exclusive(dev, "pci"); + if (IS_ERR(res->pci_reset)) +@@ -292,17 +285,13 @@ static void qcom_pcie_deinit_2_1_0(struc + { + struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0; + +- clk_disable_unprepare(res->phy_clk); ++ clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks); + reset_control_assert(res->pci_reset); + reset_control_assert(res->axi_reset); + reset_control_assert(res->ahb_reset); + reset_control_assert(res->por_reset); + reset_control_assert(res->ext_reset); + reset_control_assert(res->phy_reset); +- clk_disable_unprepare(res->iface_clk); +- clk_disable_unprepare(res->core_clk); +- clk_disable_unprepare(res->aux_clk); +- clk_disable_unprepare(res->ref_clk); + + writel(1, pcie->parf + PCIE20_PARF_PHY_CTRL); + +@@ -334,47 +323,45 @@ static int qcom_pcie_init_2_1_0(struct q + return ret; + } + +- ret = reset_control_assert(res->ahb_reset); ++ ret = reset_control_deassert(res->ahb_reset); + if (ret) { +- dev_err(dev, "cannot assert ahb reset\n"); +- goto err_assert_ahb; ++ dev_err(dev, "cannot deassert ahb reset\n"); ++ goto err_deassert_ahb; + } + +- ret = clk_prepare_enable(res->iface_clk); ++ ret = reset_control_deassert(res->ext_reset); + if (ret) { +- dev_err(dev, "cannot prepare/enable iface clock\n"); +- goto err_assert_ahb; ++ dev_err(dev, "cannot deassert ext reset\n"); ++ goto err_deassert_ext; + } + +- ret = clk_prepare_enable(res->core_clk); ++ ret = reset_control_deassert(res->phy_reset); + if (ret) { +- dev_err(dev, "cannot prepare/enable core clock\n"); +- goto err_clk_core; ++ dev_err(dev, "cannot deassert phy reset\n"); ++ goto err_deassert_phy; + } + +- ret = clk_prepare_enable(res->aux_clk); ++ ret = reset_control_deassert(res->pci_reset); + if (ret) { +- dev_err(dev, "cannot prepare/enable aux clock\n"); +- goto err_clk_aux; ++ dev_err(dev, "cannot deassert pci reset\n"); ++ goto err_deassert_pci; + } + +- ret = clk_prepare_enable(res->ref_clk); ++ ret = reset_control_deassert(res->por_reset); + if (ret) { +- dev_err(dev, "cannot prepare/enable ref clock\n"); +- goto err_clk_ref; ++ dev_err(dev, "cannot deassert por reset\n"); ++ goto err_deassert_por; + } + +- ret = reset_control_deassert(res->ahb_reset); ++ ret = reset_control_deassert(res->axi_reset); + if (ret) { +- dev_err(dev, "cannot deassert ahb reset\n"); +- goto err_deassert_ahb; ++ dev_err(dev, "cannot deassert axi reset\n"); ++ goto err_deassert_axi; + } + +- ret = reset_control_deassert(res->ext_reset); +- if (ret) { +- dev_err(dev, "cannot deassert ext reset\n"); +- goto err_deassert_ahb; +- } ++ ret = clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks); ++ if (ret) ++ goto err_clks; + + /* enable PCIe clocks and resets */ + val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); +@@ -406,36 +393,6 @@ static int qcom_pcie_init_2_1_0(struct q + val |= PHY_REFCLK_SSP_EN; + writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK); + +- ret = reset_control_deassert(res->phy_reset); +- if (ret) { +- dev_err(dev, "cannot deassert phy reset\n"); +- return ret; +- } +- +- ret = reset_control_deassert(res->pci_reset); +- if (ret) { +- dev_err(dev, "cannot deassert pci reset\n"); +- return ret; +- } +- +- ret = reset_control_deassert(res->por_reset); +- if (ret) { +- dev_err(dev, "cannot deassert por reset\n"); +- return ret; +- } +- +- ret = reset_control_deassert(res->axi_reset); +- if (ret) { +- dev_err(dev, "cannot deassert axi reset\n"); +- return ret; +- } +- +- ret = clk_prepare_enable(res->phy_clk); +- if (ret) { +- dev_err(dev, "cannot prepare/enable phy clock\n"); +- goto err_deassert_ahb; +- } +- + /* wait for clock acquisition */ + usleep_range(1000, 1500); + +@@ -448,15 +405,19 @@ static int qcom_pcie_init_2_1_0(struct q + + return 0; + ++err_clks: ++ reset_control_assert(res->axi_reset); ++err_deassert_axi: ++ reset_control_assert(res->por_reset); ++err_deassert_por: ++ reset_control_assert(res->pci_reset); ++err_deassert_pci: ++ reset_control_assert(res->phy_reset); ++err_deassert_phy: ++ reset_control_assert(res->ext_reset); ++err_deassert_ext: ++ reset_control_assert(res->ahb_reset); + err_deassert_ahb: +- clk_disable_unprepare(res->ref_clk); +-err_clk_ref: +- clk_disable_unprepare(res->aux_clk); +-err_clk_aux: +- clk_disable_unprepare(res->core_clk); +-err_clk_core: +- clk_disable_unprepare(res->iface_clk); +-err_assert_ahb: + regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies); + + return ret; diff --git a/target/linux/ipq806x/patches-5.10/093-7-v5.8-ipq806x-PCI-qcom-Add-ipq8064-rev2-variant.patch b/target/linux/ipq806x/patches-5.10/093-7-v5.8-ipq806x-PCI-qcom-Add-ipq8064-rev2-variant.patch new file mode 100644 index 0000000000..c3d61f164c --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/093-7-v5.8-ipq806x-PCI-qcom-Add-ipq8064-rev2-variant.patch @@ -0,0 +1,36 @@ +From 8df093fe2ae1717389df0dcdc620c02cc35abb21 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Mon, 15 Jun 2020 23:06:05 +0200 +Subject: PCI: qcom: Add ipq8064 rev2 variant + +Ipq8064-v2 have tx term offset set to 0. Introduce this variant to permit +different offset based on the revision. + +Link: https://lore.kernel.org/r/20200615210608.21469-10-ansuelsmth@gmail.com +Signed-off-by: Ansuel Smith +Signed-off-by: Lorenzo Pieralisi +Acked-by: Stanimir Varbanov +--- + drivers/pci/controller/dwc/pcie-qcom.c | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +--- a/drivers/pci/controller/dwc/pcie-qcom.c ++++ b/drivers/pci/controller/dwc/pcie-qcom.c +@@ -368,7 +368,8 @@ static int qcom_pcie_init_2_1_0(struct q + val &= ~BIT(0); + writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); + +- if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) { ++ if (of_device_is_compatible(node, "qcom,pcie-ipq8064") || ++ of_device_is_compatible(node, "qcom,pcie-ipq8064-v2")) { + writel(PCS_DEEMPH_TX_DEEMPH_GEN1(24) | + PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(24) | + PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(34), +@@ -1328,6 +1329,7 @@ err_pm_runtime_put: + static const struct of_device_id qcom_pcie_match[] = { + { .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 }, + { .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 }, ++ { .compatible = "qcom,pcie-ipq8064-v2", .data = &ops_2_1_0 }, + { .compatible = "qcom,pcie-apq8064", .data = &ops_2_1_0 }, + { .compatible = "qcom,pcie-msm8996", .data = &ops_2_3_2 }, + { .compatible = "qcom,pcie-ipq8074", .data = &ops_2_3_3 }, diff --git a/target/linux/ipq806x/patches-5.10/093-8-v5.8-ipq806x-PCI-qcom-Support-pci-speed-set-for-ipq806x.patch b/target/linux/ipq806x/patches-5.10/093-8-v5.8-ipq806x-PCI-qcom-Support-pci-speed-set-for-ipq806x.patch new file mode 100644 index 0000000000..02ac7460e8 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/093-8-v5.8-ipq806x-PCI-qcom-Support-pci-speed-set-for-ipq806x.patch @@ -0,0 +1,74 @@ +From 51ed2c2b60265006bde7531d10993cf24def0aee Mon Sep 17 00:00:00 2001 +From: Sham Muthayyan +Date: Mon, 15 Jun 2020 23:06:07 +0200 +Subject: PCI: qcom: Support pci speed set for ipq806x + +Some SoC based on ipq8064/5 needs to be limited to pci GEN1 speed due to +some hardware limitations. Add support for speed setting defined by the +max-link-speed binding. If not defined the max speed is set to GEN2 by +default. + +Link: https://lore.kernel.org/r/20200615210608.21469-12-ansuelsmth@gmail.com +Signed-off-by: Sham Muthayyan +Signed-off-by: Ansuel Smith +Signed-off-by: Lorenzo Pieralisi +Reviewed-by: Rob Herring +Acked-by: Stanimir Varbanov +--- + +Backported with light changes: +* One include is missing in kernel 5.4 + + drivers/pci/controller/dwc/pcie-qcom.c | 13 +++++++++++++ + 1 file changed, 13 insertions(+) + +--- a/drivers/pci/controller/dwc/pcie-qcom.c ++++ b/drivers/pci/controller/dwc/pcie-qcom.c +@@ -27,6 +27,7 @@ + #include + #include + ++#include "../../pci.h" + #include "pcie-designware.h" + + #define PCIE20_PARF_SYS_CTRL 0x00 +@@ -98,6 +99,8 @@ + #define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358 + #define SLV_ADDR_SPACE_SZ 0x10000000 + ++#define PCIE20_LNK_CONTROL2_LINK_STATUS2 0xa0 ++ + #define QCOM_PCIE_2_1_0_MAX_SUPPLY 3 + #define QCOM_PCIE_2_1_0_MAX_CLOCKS 5 + struct qcom_pcie_resources_2_1_0 { +@@ -184,6 +187,7 @@ struct qcom_pcie { + struct phy *phy; + struct gpio_desc *reset; + const struct qcom_pcie_ops *ops; ++ int gen; + }; + + #define to_qcom_pcie(x) dev_get_drvdata((x)->dev) +@@ -397,6 +401,11 @@ static int qcom_pcie_init_2_1_0(struct q + /* wait for clock acquisition */ + usleep_range(1000, 1500); + ++ if (pcie->gen == 1) { ++ val = readl(pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2); ++ val |= PCI_EXP_LNKSTA_CLS_2_5GB; ++ writel(val, pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2); ++ } + + /* Set the Max TLP size to 2K, instead of using default of 4K */ + writel(CFG_REMOTE_RD_REQ_BRIDGE_SIZE_2K, +@@ -1261,6 +1270,10 @@ static int qcom_pcie_probe(struct platfo + goto err_pm_runtime_put; + } + ++ pcie->gen = of_pci_get_max_link_speed(pdev->dev.of_node); ++ if (pcie->gen < 0) ++ pcie->gen = 2; ++ + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf"); + pcie->parf = devm_ioremap_resource(dev, res); + if (IS_ERR(pcie->parf)) { diff --git a/target/linux/ipq806x/patches-5.10/094-v5.7-ipq806x-net-mdio-add-ipq8064-mdio-driver.patch b/target/linux/ipq806x/patches-5.10/094-v5.7-ipq806x-net-mdio-add-ipq8064-mdio-driver.patch new file mode 100644 index 0000000000..328942dad9 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/094-v5.7-ipq806x-net-mdio-add-ipq8064-mdio-driver.patch @@ -0,0 +1,216 @@ +From caaa71fac36ec8c19145dbf8262a9b77ab09f1a1 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Wed, 4 Mar 2020 22:38:32 +0100 +Subject: net: mdio: add ipq8064 mdio driver + +Currently ipq806x soc use generic bitbang driver to +comunicate with the gmac ethernet interface. +Add a dedicated driver created by chunkeey to fix this. + +Co-developed-by: Christian Lamparter +Signed-off-by: Christian Lamparter +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/phy/Kconfig | 8 ++ + drivers/net/phy/Makefile | 1 + + drivers/net/phy/mdio-ipq8064.c | 166 +++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 175 insertions(+) + create mode 100644 drivers/net/phy/mdio-ipq8064.c + +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -156,6 +156,14 @@ config MDIO_I2C + + This is library mode. + ++config MDIO_IPQ8064 ++ tristate "Qualcomm IPQ8064 MDIO interface support" ++ depends on HAS_IOMEM && OF_MDIO ++ depends on MFD_SYSCON ++ help ++ This driver supports the MDIO interface found in the network ++ interface units of the IPQ8064 SoC ++ + config MDIO_MOXART + tristate "MOXA ART MDIO interface support" + depends on ARCH_MOXART || COMPILE_TEST +--- a/drivers/net/phy/Makefile ++++ b/drivers/net/phy/Makefile +@@ -50,6 +50,7 @@ obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium + obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o + obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o + obj-$(CONFIG_MDIO_I2C) += mdio-i2c.o ++obj-$(CONFIG_MDIO_IPQ8064) += mdio-ipq8064.o + obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o + obj-$(CONFIG_MDIO_MSCC_MIIM) += mdio-mscc-miim.o + obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o +--- /dev/null ++++ b/drivers/net/phy/mdio-ipq8064.c +@@ -0,0 +1,166 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* Qualcomm IPQ8064 MDIO interface driver ++ * ++ * Copyright (C) 2019 Christian Lamparter ++ * Copyright (C) 2020 Ansuel Smith ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* MII address register definitions */ ++#define MII_ADDR_REG_ADDR 0x10 ++#define MII_BUSY BIT(0) ++#define MII_WRITE BIT(1) ++#define MII_CLKRANGE_60_100M (0 << 2) ++#define MII_CLKRANGE_100_150M (1 << 2) ++#define MII_CLKRANGE_20_35M (2 << 2) ++#define MII_CLKRANGE_35_60M (3 << 2) ++#define MII_CLKRANGE_150_250M (4 << 2) ++#define MII_CLKRANGE_250_300M (5 << 2) ++#define MII_CLKRANGE_MASK GENMASK(4, 2) ++#define MII_REG_SHIFT 6 ++#define MII_REG_MASK GENMASK(10, 6) ++#define MII_ADDR_SHIFT 11 ++#define MII_ADDR_MASK GENMASK(15, 11) ++ ++#define MII_DATA_REG_ADDR 0x14 ++ ++#define MII_MDIO_DELAY_USEC (1000) ++#define MII_MDIO_RETRY_MSEC (10) ++ ++struct ipq8064_mdio { ++ struct regmap *base; /* NSS_GMAC0_BASE */ ++}; ++ ++static int ++ipq8064_mdio_wait_busy(struct ipq8064_mdio *priv) ++{ ++ u32 busy; ++ ++ return regmap_read_poll_timeout(priv->base, MII_ADDR_REG_ADDR, busy, ++ !(busy & MII_BUSY), MII_MDIO_DELAY_USEC, ++ MII_MDIO_RETRY_MSEC * USEC_PER_MSEC); ++} ++ ++static int ++ipq8064_mdio_read(struct mii_bus *bus, int phy_addr, int reg_offset) ++{ ++ u32 miiaddr = MII_BUSY | MII_CLKRANGE_250_300M; ++ struct ipq8064_mdio *priv = bus->priv; ++ u32 ret_val; ++ int err; ++ ++ /* Reject clause 45 */ ++ if (reg_offset & MII_ADDR_C45) ++ return -EOPNOTSUPP; ++ ++ miiaddr |= ((phy_addr << MII_ADDR_SHIFT) & MII_ADDR_MASK) | ++ ((reg_offset << MII_REG_SHIFT) & MII_REG_MASK); ++ ++ regmap_write(priv->base, MII_ADDR_REG_ADDR, miiaddr); ++ usleep_range(8, 10); ++ ++ err = ipq8064_mdio_wait_busy(priv); ++ if (err) ++ return err; ++ ++ regmap_read(priv->base, MII_DATA_REG_ADDR, &ret_val); ++ return (int)ret_val; ++} ++ ++static int ++ipq8064_mdio_write(struct mii_bus *bus, int phy_addr, int reg_offset, u16 data) ++{ ++ u32 miiaddr = MII_WRITE | MII_BUSY | MII_CLKRANGE_250_300M; ++ struct ipq8064_mdio *priv = bus->priv; ++ ++ /* Reject clause 45 */ ++ if (reg_offset & MII_ADDR_C45) ++ return -EOPNOTSUPP; ++ ++ regmap_write(priv->base, MII_DATA_REG_ADDR, data); ++ ++ miiaddr |= ((phy_addr << MII_ADDR_SHIFT) & MII_ADDR_MASK) | ++ ((reg_offset << MII_REG_SHIFT) & MII_REG_MASK); ++ ++ regmap_write(priv->base, MII_ADDR_REG_ADDR, miiaddr); ++ usleep_range(8, 10); ++ ++ return ipq8064_mdio_wait_busy(priv); ++} ++ ++static int ++ipq8064_mdio_probe(struct platform_device *pdev) ++{ ++ struct device_node *np = pdev->dev.of_node; ++ struct ipq8064_mdio *priv; ++ struct mii_bus *bus; ++ int ret; ++ ++ bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*priv)); ++ if (!bus) ++ return -ENOMEM; ++ ++ bus->name = "ipq8064_mdio_bus"; ++ bus->read = ipq8064_mdio_read; ++ bus->write = ipq8064_mdio_write; ++ snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(&pdev->dev)); ++ bus->parent = &pdev->dev; ++ ++ priv = bus->priv; ++ priv->base = device_node_to_regmap(np); ++ if (IS_ERR(priv->base)) { ++ if (priv->base == ERR_PTR(-EPROBE_DEFER)) ++ return -EPROBE_DEFER; ++ ++ dev_err(&pdev->dev, "error getting device regmap, error=%pe\n", ++ priv->base); ++ return PTR_ERR(priv->base); ++ } ++ ++ ret = of_mdiobus_register(bus, np); ++ if (ret) ++ return ret; ++ ++ platform_set_drvdata(pdev, bus); ++ return 0; ++} ++ ++static int ++ipq8064_mdio_remove(struct platform_device *pdev) ++{ ++ struct mii_bus *bus = platform_get_drvdata(pdev); ++ ++ mdiobus_unregister(bus); ++ ++ return 0; ++} ++ ++static const struct of_device_id ipq8064_mdio_dt_ids[] = { ++ { .compatible = "qcom,ipq8064-mdio" }, ++ { } ++}; ++MODULE_DEVICE_TABLE(of, ipq8064_mdio_dt_ids); ++ ++static struct platform_driver ipq8064_mdio_driver = { ++ .probe = ipq8064_mdio_probe, ++ .remove = ipq8064_mdio_remove, ++ .driver = { ++ .name = "ipq8064-mdio", ++ .of_match_table = ipq8064_mdio_dt_ids, ++ }, ++}; ++ ++module_platform_driver(ipq8064_mdio_driver); ++ ++MODULE_DESCRIPTION("Qualcomm IPQ8064 MDIO interface driver"); ++MODULE_AUTHOR("Christian Lamparter "); ++MODULE_AUTHOR("Ansuel Smith "); ++MODULE_LICENSE("GPL"); diff --git a/target/linux/ipq806x/patches-5.10/095-1-v5.9-phy-qualcomm-add-qcom-ipq806x-dwc-usb-phy-driver.patch b/target/linux/ipq806x/patches-5.10/095-1-v5.9-phy-qualcomm-add-qcom-ipq806x-dwc-usb-phy-driver.patch new file mode 100644 index 0000000000..47dc455715 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/095-1-v5.9-phy-qualcomm-add-qcom-ipq806x-dwc-usb-phy-driver.patch @@ -0,0 +1,621 @@ +From ef19b117b83466e1c030368101a24367a34be7f0 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Fri, 17 Jul 2020 15:16:31 +0200 +Subject: phy: qualcomm: add qcom ipq806x dwc usb phy driver + +This has lost in the original push for the dwc3 qcom driver. +This is needed for ipq806x SoC as without this the usb ports +doesn't work at all. + +Signed-off-by: Andy Gross +Signed-off-by: Ansuel Smith +Tested-by: Jonathan McDowell +Link: https://lore.kernel.org/r/20200717131635.11076-1-ansuelsmth@gmail.com +Signed-off-by: Vinod Koul +--- + +Light modification to Kconfig as some config are missing in kernel 5.4 + + drivers/phy/qualcomm/Kconfig | 10 + + drivers/phy/qualcomm/Makefile | 1 + + drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c | 571 ++++++++++++++++++++++++++++ + 3 files changed, 582 insertions(+) + create mode 100644 drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c + +--- a/drivers/phy/qualcomm/Kconfig ++++ b/drivers/phy/qualcomm/Kconfig +@@ -91,3 +91,13 @@ config PHY_QCOM_USB_HSIC + select GENERIC_PHY + help + Support for the USB HSIC ULPI compliant PHY on QCOM chipsets. ++ ++config PHY_QCOM_IPQ806X_USB ++ tristate "Qualcomm IPQ806x DWC3 USB PHY driver" ++ depends on HAS_IOMEM ++ depends on OF && (ARCH_QCOM || COMPILE_TEST) ++ select GENERIC_PHY ++ help ++ This option enables support for the Synopsis PHYs present inside the ++ Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports ++ both HS and SS PHY controllers. +--- a/drivers/phy/qualcomm/Makefile ++++ b/drivers/phy/qualcomm/Makefile +@@ -10,3 +10,4 @@ obj-$(CONFIG_PHY_QCOM_UFS_14NM) += phy- + obj-$(CONFIG_PHY_QCOM_UFS_20NM) += phy-qcom-ufs-qmp-20nm.o + obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o + obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o ++obj-$(CONFIG_PHY_QCOM_IPQ806X_USB) += phy-qcom-ipq806x-usb.o +--- /dev/null ++++ b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c +@@ -0,0 +1,571 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* USB QSCRATCH Hardware registers */ ++#define QSCRATCH_GENERAL_CFG (0x08) ++#define HSUSB_PHY_CTRL_REG (0x10) ++ ++/* PHY_CTRL_REG */ ++#define HSUSB_CTRL_DMSEHV_CLAMP BIT(24) ++#define HSUSB_CTRL_USB2_SUSPEND BIT(23) ++#define HSUSB_CTRL_UTMI_CLK_EN BIT(21) ++#define HSUSB_CTRL_UTMI_OTG_VBUS_VALID BIT(20) ++#define HSUSB_CTRL_USE_CLKCORE BIT(18) ++#define HSUSB_CTRL_DPSEHV_CLAMP BIT(17) ++#define HSUSB_CTRL_COMMONONN BIT(11) ++#define HSUSB_CTRL_ID_HV_CLAMP BIT(9) ++#define HSUSB_CTRL_OTGSESSVLD_CLAMP BIT(8) ++#define HSUSB_CTRL_CLAMP_EN BIT(7) ++#define HSUSB_CTRL_RETENABLEN BIT(1) ++#define HSUSB_CTRL_POR BIT(0) ++ ++/* QSCRATCH_GENERAL_CFG */ ++#define HSUSB_GCFG_XHCI_REV BIT(2) ++ ++/* USB QSCRATCH Hardware registers */ ++#define SSUSB_PHY_CTRL_REG (0x00) ++#define SSUSB_PHY_PARAM_CTRL_1 (0x04) ++#define SSUSB_PHY_PARAM_CTRL_2 (0x08) ++#define CR_PROTOCOL_DATA_IN_REG (0x0c) ++#define CR_PROTOCOL_DATA_OUT_REG (0x10) ++#define CR_PROTOCOL_CAP_ADDR_REG (0x14) ++#define CR_PROTOCOL_CAP_DATA_REG (0x18) ++#define CR_PROTOCOL_READ_REG (0x1c) ++#define CR_PROTOCOL_WRITE_REG (0x20) ++ ++/* PHY_CTRL_REG */ ++#define SSUSB_CTRL_REF_USE_PAD BIT(28) ++#define SSUSB_CTRL_TEST_POWERDOWN BIT(27) ++#define SSUSB_CTRL_LANE0_PWR_PRESENT BIT(24) ++#define SSUSB_CTRL_SS_PHY_EN BIT(8) ++#define SSUSB_CTRL_SS_PHY_RESET BIT(7) ++ ++/* SSPHY control registers - Does this need 0x30? */ ++#define SSPHY_CTRL_RX_OVRD_IN_HI(lane) (0x1006 + 0x100 * (lane)) ++#define SSPHY_CTRL_TX_OVRD_DRV_LO(lane) (0x1002 + 0x100 * (lane)) ++ ++/* SSPHY SoC version specific values */ ++#define SSPHY_RX_EQ_VALUE 4 /* Override value for rx_eq */ ++/* Override value for transmit preemphasis */ ++#define SSPHY_TX_DEEMPH_3_5DB 23 ++/* Override value for mpll */ ++#define SSPHY_MPLL_VALUE 0 ++ ++/* QSCRATCH PHY_PARAM_CTRL1 fields */ ++#define PHY_PARAM_CTRL1_TX_FULL_SWING_MASK GENMASK(26, 19) ++#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK GENMASK(19, 13) ++#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK GENMASK(13, 7) ++#define PHY_PARAM_CTRL1_LOS_BIAS_MASK GENMASK(7, 2) ++ ++#define PHY_PARAM_CTRL1_MASK \ ++ (PHY_PARAM_CTRL1_TX_FULL_SWING_MASK | \ ++ PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK | \ ++ PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK | \ ++ PHY_PARAM_CTRL1_LOS_BIAS_MASK) ++ ++#define PHY_PARAM_CTRL1_TX_FULL_SWING(x) \ ++ (((x) << 20) & PHY_PARAM_CTRL1_TX_FULL_SWING_MASK) ++#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB(x) \ ++ (((x) << 14) & PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK) ++#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(x) \ ++ (((x) << 8) & PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK) ++#define PHY_PARAM_CTRL1_LOS_BIAS(x) \ ++ (((x) << 3) & PHY_PARAM_CTRL1_LOS_BIAS_MASK) ++ ++/* RX OVRD IN HI bits */ ++#define RX_OVRD_IN_HI_RX_RESET_OVRD BIT(13) ++#define RX_OVRD_IN_HI_RX_RX_RESET BIT(12) ++#define RX_OVRD_IN_HI_RX_EQ_OVRD BIT(11) ++#define RX_OVRD_IN_HI_RX_EQ_MASK GENMASK(10, 7) ++#define RX_OVRD_IN_HI_RX_EQ(x) ((x) << 8) ++#define RX_OVRD_IN_HI_RX_EQ_EN_OVRD BIT(7) ++#define RX_OVRD_IN_HI_RX_EQ_EN BIT(6) ++#define RX_OVRD_IN_HI_RX_LOS_FILTER_OVRD BIT(5) ++#define RX_OVRD_IN_HI_RX_LOS_FILTER_MASK GENMASK(4, 2) ++#define RX_OVRD_IN_HI_RX_RATE_OVRD BIT(2) ++#define RX_OVRD_IN_HI_RX_RATE_MASK GENMASK(2, 0) ++ ++/* TX OVRD DRV LO register bits */ ++#define TX_OVRD_DRV_LO_AMPLITUDE_MASK GENMASK(6, 0) ++#define TX_OVRD_DRV_LO_PREEMPH_MASK GENMASK(13, 6) ++#define TX_OVRD_DRV_LO_PREEMPH(x) ((x) << 7) ++#define TX_OVRD_DRV_LO_EN BIT(14) ++ ++/* MPLL bits */ ++#define SSPHY_MPLL_MASK GENMASK(8, 5) ++#define SSPHY_MPLL(x) ((x) << 5) ++ ++/* SS CAP register bits */ ++#define SS_CR_CAP_ADDR_REG BIT(0) ++#define SS_CR_CAP_DATA_REG BIT(0) ++#define SS_CR_READ_REG BIT(0) ++#define SS_CR_WRITE_REG BIT(0) ++ ++struct usb_phy { ++ void __iomem *base; ++ struct device *dev; ++ struct clk *xo_clk; ++ struct clk *ref_clk; ++ u32 rx_eq; ++ u32 tx_deamp_3_5db; ++ u32 mpll; ++}; ++ ++struct phy_drvdata { ++ struct phy_ops ops; ++ u32 clk_rate; ++}; ++ ++/** ++ * Write register and read back masked value to confirm it is written ++ * ++ * @base - QCOM DWC3 PHY base virtual address. ++ * @offset - register offset. ++ * @mask - register bitmask specifying what should be updated ++ * @val - value to write. ++ */ ++static inline void usb_phy_write_readback(struct usb_phy *phy_dwc3, ++ u32 offset, ++ const u32 mask, u32 val) ++{ ++ u32 write_val, tmp = readl(phy_dwc3->base + offset); ++ ++ tmp &= ~mask; /* retain other bits */ ++ write_val = tmp | val; ++ ++ writel(write_val, phy_dwc3->base + offset); ++ ++ /* Read back to see if val was written */ ++ tmp = readl(phy_dwc3->base + offset); ++ tmp &= mask; /* clear other bits */ ++ ++ if (tmp != val) ++ dev_err(phy_dwc3->dev, "write: %x to QSCRATCH: %x FAILED\n", val, offset); ++} ++ ++static int wait_for_latch(void __iomem *addr) ++{ ++ u32 retry = 10; ++ ++ while (true) { ++ if (!readl(addr)) ++ break; ++ ++ if (--retry == 0) ++ return -ETIMEDOUT; ++ ++ usleep_range(10, 20); ++ } ++ ++ return 0; ++} ++ ++/** ++ * Write SSPHY register ++ * ++ * @base - QCOM DWC3 PHY base virtual address. ++ * @addr - SSPHY address to write. ++ * @val - value to write. ++ */ ++static int usb_ss_write_phycreg(struct usb_phy *phy_dwc3, ++ u32 addr, u32 val) ++{ ++ int ret; ++ ++ writel(addr, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG); ++ writel(SS_CR_CAP_ADDR_REG, ++ phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG); ++ ++ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG); ++ if (ret) ++ goto err_wait; ++ ++ writel(val, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG); ++ writel(SS_CR_CAP_DATA_REG, ++ phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG); ++ ++ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG); ++ if (ret) ++ goto err_wait; ++ ++ writel(SS_CR_WRITE_REG, phy_dwc3->base + CR_PROTOCOL_WRITE_REG); ++ ++ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_WRITE_REG); ++ ++err_wait: ++ if (ret) ++ dev_err(phy_dwc3->dev, "timeout waiting for latch\n"); ++ return ret; ++} ++ ++/** ++ * Read SSPHY register. ++ * ++ * @base - QCOM DWC3 PHY base virtual address. ++ * @addr - SSPHY address to read. ++ */ ++static int usb_ss_read_phycreg(struct usb_phy *phy_dwc3, ++ u32 addr, u32 *val) ++{ ++ int ret; ++ ++ writel(addr, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG); ++ writel(SS_CR_CAP_ADDR_REG, ++ phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG); ++ ++ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG); ++ if (ret) ++ goto err_wait; ++ ++ /* ++ * Due to hardware bug, first read of SSPHY register might be ++ * incorrect. Hence as workaround, SW should perform SSPHY register ++ * read twice, but use only second read and ignore first read. ++ */ ++ writel(SS_CR_READ_REG, phy_dwc3->base + CR_PROTOCOL_READ_REG); ++ ++ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_READ_REG); ++ if (ret) ++ goto err_wait; ++ ++ /* throwaway read */ ++ readl(phy_dwc3->base + CR_PROTOCOL_DATA_OUT_REG); ++ ++ writel(SS_CR_READ_REG, phy_dwc3->base + CR_PROTOCOL_READ_REG); ++ ++ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_READ_REG); ++ if (ret) ++ goto err_wait; ++ ++ *val = readl(phy_dwc3->base + CR_PROTOCOL_DATA_OUT_REG); ++ ++err_wait: ++ return ret; ++} ++ ++static int qcom_ipq806x_usb_hs_phy_init(struct phy *phy) ++{ ++ struct usb_phy *phy_dwc3 = phy_get_drvdata(phy); ++ int ret; ++ u32 val; ++ ++ ret = clk_prepare_enable(phy_dwc3->xo_clk); ++ if (ret) ++ return ret; ++ ++ ret = clk_prepare_enable(phy_dwc3->ref_clk); ++ if (ret) { ++ clk_disable_unprepare(phy_dwc3->xo_clk); ++ return ret; ++ } ++ ++ /* ++ * HSPHY Initialization: Enable UTMI clock, select 19.2MHz fsel ++ * enable clamping, and disable RETENTION (power-on default is ENABLED) ++ */ ++ val = HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_DMSEHV_CLAMP | ++ HSUSB_CTRL_RETENABLEN | HSUSB_CTRL_COMMONONN | ++ HSUSB_CTRL_OTGSESSVLD_CLAMP | HSUSB_CTRL_ID_HV_CLAMP | ++ HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_UTMI_OTG_VBUS_VALID | ++ HSUSB_CTRL_UTMI_CLK_EN | HSUSB_CTRL_CLAMP_EN | 0x70; ++ ++ /* use core clock if external reference is not present */ ++ if (!phy_dwc3->xo_clk) ++ val |= HSUSB_CTRL_USE_CLKCORE; ++ ++ writel(val, phy_dwc3->base + HSUSB_PHY_CTRL_REG); ++ usleep_range(2000, 2200); ++ ++ /* Disable (bypass) VBUS and ID filters */ ++ writel(HSUSB_GCFG_XHCI_REV, phy_dwc3->base + QSCRATCH_GENERAL_CFG); ++ ++ return 0; ++} ++ ++static int qcom_ipq806x_usb_hs_phy_exit(struct phy *phy) ++{ ++ struct usb_phy *phy_dwc3 = phy_get_drvdata(phy); ++ ++ clk_disable_unprepare(phy_dwc3->ref_clk); ++ clk_disable_unprepare(phy_dwc3->xo_clk); ++ ++ return 0; ++} ++ ++static int qcom_ipq806x_usb_ss_phy_init(struct phy *phy) ++{ ++ struct usb_phy *phy_dwc3 = phy_get_drvdata(phy); ++ int ret; ++ u32 data; ++ ++ ret = clk_prepare_enable(phy_dwc3->xo_clk); ++ if (ret) ++ return ret; ++ ++ ret = clk_prepare_enable(phy_dwc3->ref_clk); ++ if (ret) { ++ clk_disable_unprepare(phy_dwc3->xo_clk); ++ return ret; ++ } ++ ++ /* reset phy */ ++ data = readl(phy_dwc3->base + SSUSB_PHY_CTRL_REG); ++ writel(data | SSUSB_CTRL_SS_PHY_RESET, ++ phy_dwc3->base + SSUSB_PHY_CTRL_REG); ++ usleep_range(2000, 2200); ++ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG); ++ ++ /* clear REF_PAD if we don't have XO clk */ ++ if (!phy_dwc3->xo_clk) ++ data &= ~SSUSB_CTRL_REF_USE_PAD; ++ else ++ data |= SSUSB_CTRL_REF_USE_PAD; ++ ++ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG); ++ ++ /* wait for ref clk to become stable, this can take up to 30ms */ ++ msleep(30); ++ ++ data |= SSUSB_CTRL_SS_PHY_EN | SSUSB_CTRL_LANE0_PWR_PRESENT; ++ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG); ++ ++ /* ++ * WORKAROUND: There is SSPHY suspend bug due to which USB enumerates ++ * in HS mode instead of SS mode. Workaround it by asserting ++ * LANE0.TX_ALT_BLOCK.EN_ALT_BUS to enable TX to use alt bus mode ++ */ ++ ret = usb_ss_read_phycreg(phy_dwc3, 0x102D, &data); ++ if (ret) ++ goto err_phy_trans; ++ ++ data |= (1 << 7); ++ ret = usb_ss_write_phycreg(phy_dwc3, 0x102D, data); ++ if (ret) ++ goto err_phy_trans; ++ ++ ret = usb_ss_read_phycreg(phy_dwc3, 0x1010, &data); ++ if (ret) ++ goto err_phy_trans; ++ ++ data &= ~0xff0; ++ data |= 0x20; ++ ret = usb_ss_write_phycreg(phy_dwc3, 0x1010, data); ++ if (ret) ++ goto err_phy_trans; ++ ++ /* ++ * Fix RX Equalization setting as follows ++ * LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0 ++ * LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1 ++ * LANE0.RX_OVRD_IN_HI.RX_EQ set based on SoC version ++ * LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1 ++ */ ++ ret = usb_ss_read_phycreg(phy_dwc3, SSPHY_CTRL_RX_OVRD_IN_HI(0), &data); ++ if (ret) ++ goto err_phy_trans; ++ ++ data &= ~RX_OVRD_IN_HI_RX_EQ_EN; ++ data |= RX_OVRD_IN_HI_RX_EQ_EN_OVRD; ++ data &= ~RX_OVRD_IN_HI_RX_EQ_MASK; ++ data |= RX_OVRD_IN_HI_RX_EQ(phy_dwc3->rx_eq); ++ data |= RX_OVRD_IN_HI_RX_EQ_OVRD; ++ ret = usb_ss_write_phycreg(phy_dwc3, ++ SSPHY_CTRL_RX_OVRD_IN_HI(0), data); ++ if (ret) ++ goto err_phy_trans; ++ ++ /* ++ * Set EQ and TX launch amplitudes as follows ++ * LANE0.TX_OVRD_DRV_LO.PREEMPH set based on SoC version ++ * LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 110 ++ * LANE0.TX_OVRD_DRV_LO.EN set to 1. ++ */ ++ ret = usb_ss_read_phycreg(phy_dwc3, ++ SSPHY_CTRL_TX_OVRD_DRV_LO(0), &data); ++ if (ret) ++ goto err_phy_trans; ++ ++ data &= ~TX_OVRD_DRV_LO_PREEMPH_MASK; ++ data |= TX_OVRD_DRV_LO_PREEMPH(phy_dwc3->tx_deamp_3_5db); ++ data &= ~TX_OVRD_DRV_LO_AMPLITUDE_MASK; ++ data |= 0x6E; ++ data |= TX_OVRD_DRV_LO_EN; ++ ret = usb_ss_write_phycreg(phy_dwc3, ++ SSPHY_CTRL_TX_OVRD_DRV_LO(0), data); ++ if (ret) ++ goto err_phy_trans; ++ ++ data = 0; ++ data &= ~SSPHY_MPLL_MASK; ++ data |= SSPHY_MPLL(phy_dwc3->mpll); ++ usb_ss_write_phycreg(phy_dwc3, 0x30, data); ++ ++ /* ++ * Set the QSCRATCH PHY_PARAM_CTRL1 parameters as follows ++ * TX_FULL_SWING [26:20] amplitude to 110 ++ * TX_DEEMPH_6DB [19:14] to 32 ++ * TX_DEEMPH_3_5DB [13:8] set based on SoC version ++ * LOS_BIAS [7:3] to 9 ++ */ ++ data = readl(phy_dwc3->base + SSUSB_PHY_PARAM_CTRL_1); ++ ++ data &= ~PHY_PARAM_CTRL1_MASK; ++ ++ data |= PHY_PARAM_CTRL1_TX_FULL_SWING(0x6e) | ++ PHY_PARAM_CTRL1_TX_DEEMPH_6DB(0x20) | ++ PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(phy_dwc3->tx_deamp_3_5db) | ++ PHY_PARAM_CTRL1_LOS_BIAS(0x9); ++ ++ usb_phy_write_readback(phy_dwc3, SSUSB_PHY_PARAM_CTRL_1, ++ PHY_PARAM_CTRL1_MASK, data); ++ ++err_phy_trans: ++ return ret; ++} ++ ++static int qcom_ipq806x_usb_ss_phy_exit(struct phy *phy) ++{ ++ struct usb_phy *phy_dwc3 = phy_get_drvdata(phy); ++ ++ /* Sequence to put SSPHY in low power state: ++ * 1. Clear REF_PHY_EN in PHY_CTRL_REG ++ * 2. Clear REF_USE_PAD in PHY_CTRL_REG ++ * 3. Set TEST_POWERED_DOWN in PHY_CTRL_REG to enable PHY retention ++ */ ++ usb_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG, ++ SSUSB_CTRL_SS_PHY_EN, 0x0); ++ usb_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG, ++ SSUSB_CTRL_REF_USE_PAD, 0x0); ++ usb_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG, ++ SSUSB_CTRL_TEST_POWERDOWN, 0x0); ++ ++ clk_disable_unprepare(phy_dwc3->ref_clk); ++ clk_disable_unprepare(phy_dwc3->xo_clk); ++ ++ return 0; ++} ++ ++static const struct phy_drvdata qcom_ipq806x_usb_hs_drvdata = { ++ .ops = { ++ .init = qcom_ipq806x_usb_hs_phy_init, ++ .exit = qcom_ipq806x_usb_hs_phy_exit, ++ .owner = THIS_MODULE, ++ }, ++ .clk_rate = 60000000, ++}; ++ ++static const struct phy_drvdata qcom_ipq806x_usb_ss_drvdata = { ++ .ops = { ++ .init = qcom_ipq806x_usb_ss_phy_init, ++ .exit = qcom_ipq806x_usb_ss_phy_exit, ++ .owner = THIS_MODULE, ++ }, ++ .clk_rate = 125000000, ++}; ++ ++static const struct of_device_id qcom_ipq806x_usb_phy_table[] = { ++ { .compatible = "qcom,ipq806x-usb-phy-hs", ++ .data = &qcom_ipq806x_usb_hs_drvdata }, ++ { .compatible = "qcom,ipq806x-usb-phy-ss", ++ .data = &qcom_ipq806x_usb_ss_drvdata }, ++ { /* Sentinel */ } ++}; ++MODULE_DEVICE_TABLE(of, qcom_ipq806x_usb_phy_table); ++ ++static int qcom_ipq806x_usb_phy_probe(struct platform_device *pdev) ++{ ++ struct resource *res; ++ resource_size_t size; ++ struct phy *generic_phy; ++ struct usb_phy *phy_dwc3; ++ const struct phy_drvdata *data; ++ struct phy_provider *phy_provider; ++ ++ phy_dwc3 = devm_kzalloc(&pdev->dev, sizeof(*phy_dwc3), GFP_KERNEL); ++ if (!phy_dwc3) ++ return -ENOMEM; ++ ++ data = of_device_get_match_data(&pdev->dev); ++ ++ phy_dwc3->dev = &pdev->dev; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!res) ++ return -EINVAL; ++ size = resource_size(res); ++ phy_dwc3->base = devm_ioremap(phy_dwc3->dev, res->start, size); ++ ++ if (IS_ERR(phy_dwc3->base)) { ++ dev_err(phy_dwc3->dev, "failed to map reg\n"); ++ return PTR_ERR(phy_dwc3->base); ++ } ++ ++ phy_dwc3->ref_clk = devm_clk_get(phy_dwc3->dev, "ref"); ++ if (IS_ERR(phy_dwc3->ref_clk)) { ++ dev_dbg(phy_dwc3->dev, "cannot get reference clock\n"); ++ return PTR_ERR(phy_dwc3->ref_clk); ++ } ++ ++ clk_set_rate(phy_dwc3->ref_clk, data->clk_rate); ++ ++ phy_dwc3->xo_clk = devm_clk_get(phy_dwc3->dev, "xo"); ++ if (IS_ERR(phy_dwc3->xo_clk)) { ++ dev_dbg(phy_dwc3->dev, "cannot get TCXO clock\n"); ++ phy_dwc3->xo_clk = NULL; ++ } ++ ++ /* Parse device node to probe HSIO settings */ ++ if (device_property_read_u32(&pdev->dev, "qcom,rx-eq", ++ &phy_dwc3->rx_eq)) ++ phy_dwc3->rx_eq = SSPHY_RX_EQ_VALUE; ++ ++ if (device_property_read_u32(&pdev->dev, "qcom,tx-deamp_3_5db", ++ &phy_dwc3->tx_deamp_3_5db)) ++ phy_dwc3->rx_eq = SSPHY_TX_DEEMPH_3_5DB; ++ ++ if (device_property_read_u32(&pdev->dev, "qcom,mpll", &phy_dwc3->mpll)) ++ phy_dwc3->mpll = SSPHY_MPLL_VALUE; ++ ++ generic_phy = devm_phy_create(phy_dwc3->dev, pdev->dev.of_node, &data->ops); ++ ++ if (IS_ERR(generic_phy)) ++ return PTR_ERR(generic_phy); ++ ++ phy_set_drvdata(generic_phy, phy_dwc3); ++ platform_set_drvdata(pdev, phy_dwc3); ++ ++ phy_provider = devm_of_phy_provider_register(phy_dwc3->dev, ++ of_phy_simple_xlate); ++ ++ if (IS_ERR(phy_provider)) ++ return PTR_ERR(phy_provider); ++ ++ return 0; ++} ++ ++static struct platform_driver qcom_ipq806x_usb_phy_driver = { ++ .probe = qcom_ipq806x_usb_phy_probe, ++ .driver = { ++ .name = "qcom-ipq806x-usb-phy", ++ .owner = THIS_MODULE, ++ .of_match_table = qcom_ipq806x_usb_phy_table, ++ }, ++}; ++ ++module_platform_driver(qcom_ipq806x_usb_phy_driver); ++ ++MODULE_ALIAS("platform:phy-qcom-ipq806x-usb"); ++MODULE_LICENSE("GPL v2"); ++MODULE_AUTHOR("Andy Gross "); ++MODULE_AUTHOR("Ivan T. Ivanov "); ++MODULE_DESCRIPTION("DesignWare USB3 QCOM PHY driver"); diff --git a/target/linux/ipq806x/patches-5.10/095-2-v5.9-phy-qualcomm-fix-setting-of-tx_deamp_3_5db-when-device-property-read-fails.patch b/target/linux/ipq806x/patches-5.10/095-2-v5.9-phy-qualcomm-fix-setting-of-tx_deamp_3_5db-when-device-property-read-fails.patch new file mode 100644 index 0000000000..dedbb51049 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/095-2-v5.9-phy-qualcomm-fix-setting-of-tx_deamp_3_5db-when-device-property-read-fails.patch @@ -0,0 +1,31 @@ +From 3d7b0ca5300bd01b176f2b4c10e173db802560d8 Mon Sep 17 00:00:00 2001 +From: Colin Ian King +Date: Tue, 21 Jul 2020 16:06:13 +0100 +Subject: phy: qualcomm: fix setting of tx_deamp_3_5db when device property + read fails + +Currently when reading of the device property for "qcom,tx-deamp_3_5db" +fails the default is being assigned incorrectly to phy_dwc3->rx_eq. This +looks like a copy-n-paste error and in fact should be assigning the +default instead to phy_dwc3->tx_deamp_3_5db + +Addresses-Coverity: ("Copy-paste error") +Fixes: ef19b117b834 ("phy: qualcomm: add qcom ipq806x dwc usb phy driver") +Signed-off-by: Colin Ian King +Link: https://lore.kernel.org/r/20200721150613.416876-1-colin.king@canonical.com +Signed-off-by: Vinod Koul +--- + drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c ++++ b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c +@@ -531,7 +531,7 @@ static int qcom_ipq806x_usb_phy_probe(st + + if (device_property_read_u32(&pdev->dev, "qcom,tx-deamp_3_5db", + &phy_dwc3->tx_deamp_3_5db)) +- phy_dwc3->rx_eq = SSPHY_TX_DEEMPH_3_5DB; ++ phy_dwc3->tx_deamp_3_5db = SSPHY_TX_DEEMPH_3_5DB; + + if (device_property_read_u32(&pdev->dev, "qcom,mpll", &phy_dwc3->mpll)) + phy_dwc3->mpll = SSPHY_MPLL_VALUE; diff --git a/target/linux/ipq806x/patches-5.10/850-soc-add-qualcomm-syscon.patch b/target/linux/ipq806x/patches-5.10/850-soc-add-qualcomm-syscon.patch new file mode 100644 index 0000000000..9e1ac7db04 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/850-soc-add-qualcomm-syscon.patch @@ -0,0 +1,121 @@ +From: Christian Lamparter +Subject: SoC: add qualcomm syscon +--- a/drivers/soc/qcom/Makefile ++++ b/drivers/soc/qcom/Makefile +@@ -20,6 +20,7 @@ obj-$(CONFIG_QCOM_SMP2P) += smp2p.o + obj-$(CONFIG_QCOM_SMSM) += smsm.o + obj-$(CONFIG_QCOM_SOCINFO) += socinfo.o + obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o ++obj-$(CONFIG_QCOM_TCSR) += qcom_tcsr.o + obj-$(CONFIG_QCOM_APR) += apr.o + obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o + obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o +--- a/drivers/soc/qcom/Kconfig ++++ b/drivers/soc/qcom/Kconfig +@@ -183,6 +183,13 @@ config QCOM_SOCINFO + Say yes here to support the Qualcomm socinfo driver, providing + information about the SoC to user space. + ++config QCOM_TCSR ++ tristate "QCOM Top Control and Status Registers" ++ depends on ARCH_QCOM ++ help ++ Say y here to enable TCSR support. The TCSR provides control ++ functions for various peripherals. ++ + config QCOM_WCNSS_CTRL + tristate "Qualcomm WCNSS control driver" + depends on ARCH_QCOM || COMPILE_TEST +--- /dev/null ++++ b/drivers/soc/qcom/qcom_tcsr.c +@@ -0,0 +1,64 @@ ++/* ++ * Copyright (c) 2014, The Linux foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License rev 2 and ++ * only rev 2 as published by the free Software foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define TCSR_USB_PORT_SEL 0xb0 ++ ++static int tcsr_probe(struct platform_device *pdev) ++{ ++ struct resource *res; ++ const struct device_node *node = pdev->dev.of_node; ++ void __iomem *base; ++ u32 val; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ base = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(base)) ++ return PTR_ERR(base); ++ ++ if (!of_property_read_u32(node, "qcom,usb-ctrl-select", &val)) { ++ dev_err(&pdev->dev, "setting usb port select = %d\n", val); ++ writel(val, base + TCSR_USB_PORT_SEL); ++ } ++ ++ return 0; ++} ++ ++static const struct of_device_id tcsr_dt_match[] = { ++ { .compatible = "qcom,tcsr", }, ++ { }, ++}; ++ ++MODULE_DEVICE_TABLE(of, tcsr_dt_match); ++ ++static struct platform_driver tcsr_driver = { ++ .driver = { ++ .name = "tcsr", ++ .owner = THIS_MODULE, ++ .of_match_table = tcsr_dt_match, ++ }, ++ .probe = tcsr_probe, ++}; ++ ++module_platform_driver(tcsr_driver); ++ ++MODULE_AUTHOR("Andy Gross "); ++MODULE_DESCRIPTION("QCOM TCSR driver"); ++MODULE_LICENSE("GPL v2"); +--- /dev/null ++++ b/include/dt-bindings/soc/qcom,tcsr.h +@@ -0,0 +1,23 @@ ++/* Copyright (c) 2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++#ifndef __DT_BINDINGS_QCOM_TCSR_H ++#define __DT_BINDINGS_QCOM_TCSR_H ++ ++#define TCSR_USB_SELECT_USB3_P0 0x1 ++#define TCSR_USB_SELECT_USB3_P1 0x2 ++#define TCSR_USB_SELECT_USB3_DUAL 0x3 ++ ++/* TCSR A/B REG */ ++#define IPQ806X_TCSR_REG_A_ADM_CRCI_MUX_SEL 0 ++#define IPQ806X_TCSR_REG_B_ADM_CRCI_MUX_SEL 1 ++ ++#endif diff --git a/target/linux/ipq806x/patches-5.10/851-add-gsbi1-dts.patch b/target/linux/ipq806x/patches-5.10/851-add-gsbi1-dts.patch new file mode 100644 index 0000000000..f75f994904 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/851-add-gsbi1-dts.patch @@ -0,0 +1,44 @@ +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -865,6 +865,41 @@ + reg = <0x12100000 0x10000>; + }; + ++ gsbi1: gsbi@12440000 { ++ compatible = "qcom,gsbi-v1.0.0"; ++ cell-index = <1>; ++ reg = <0x12440000 0x100>; ++ clocks = <&gcc GSBI1_H_CLK>; ++ clock-names = "iface"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ status = "disabled"; ++ ++ syscon-tcsr = <&tcsr>; ++ ++ gsbi1_serial: serial@12450000 { ++ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; ++ reg = <0x12450000 0x100>, ++ <0x12400000 0x03>; ++ interrupts = ; ++ clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>; ++ clock-names = "core", "iface"; ++ status = "disabled"; ++ }; ++ ++ gsbi1_i2c: i2c@12460000 { ++ compatible = "qcom,i2c-qup-v1.1.1"; ++ reg = <0x12460000 0x1000>; ++ interrupts = ; ++ clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; ++ clock-names = "core", "iface"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "disabled"; ++ }; ++ }; ++ + gsbi2: gsbi@12480000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <2>; diff --git a/target/linux/ipq806x/patches-5.10/900-arm-add-cmdline-override.patch b/target/linux/ipq806x/patches-5.10/900-arm-add-cmdline-override.patch new file mode 100644 index 0000000000..49cd68b68d --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/900-arm-add-cmdline-override.patch @@ -0,0 +1,37 @@ +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig +@@ -1840,6 +1840,14 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGL + + endchoice + ++config CMDLINE_OVERRIDE ++ bool "Use alternative cmdline from device tree" ++ help ++ Some bootloaders may have uneditable bootargs. While CMDLINE_FORCE can ++ be used, this is not a good option for kernels that are shared across ++ devices. This setting enables using "chosen/cmdline-override" as the ++ cmdline if it exists in the device tree. ++ + config CMDLINE + string "Default kernel command string" + default "" +--- a/drivers/of/fdt.c ++++ b/drivers/of/fdt.c +@@ -1060,6 +1060,17 @@ int __init early_init_dt_scan_chosen(uns + if (p != NULL && l > 0) + strlcpy(data, p, min(l, COMMAND_LINE_SIZE)); + ++ /* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different ++ * device tree option of chosen/bootargs-override. This is ++ * helpful on boards where u-boot sets bootargs, and is unable ++ * to be modified. ++ */ ++#ifdef CONFIG_CMDLINE_OVERRIDE ++ p = of_get_flat_dt_prop(node, "bootargs-override", &l); ++ if (p != NULL && l > 0) ++ strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE)); ++#endif ++ + /* + * CONFIG_CMDLINE is meant to be a default in case nothing else + * managed to set the command line, unless CONFIG_CMDLINE_FORCE diff --git a/target/linux/ipq806x/patches-5.10/997-device_tree_cmdline.patch b/target/linux/ipq806x/patches-5.10/997-device_tree_cmdline.patch new file mode 100644 index 0000000000..b6b1b04765 --- /dev/null +++ b/target/linux/ipq806x/patches-5.10/997-device_tree_cmdline.patch @@ -0,0 +1,12 @@ +--- a/drivers/of/fdt.c ++++ b/drivers/of/fdt.c +@@ -1059,6 +1059,9 @@ int __init early_init_dt_scan_chosen(uns + p = of_get_flat_dt_prop(node, "bootargs", &l); + if (p != NULL && l > 0) + strlcpy(data, p, min(l, COMMAND_LINE_SIZE)); ++ p = of_get_flat_dt_prop(node, "bootargs-append", &l); ++ if (p != NULL && l > 0) ++ strlcat(data, p, min_t(int, strlen(data) + (int)l, COMMAND_LINE_SIZE)); + + /* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different + * device tree option of chosen/bootargs-override. This is