From: Chicago Duan <duanzhijia01@inspur.com>
Date: Wed, 4 Sep 2019 02:16:20 +0000 (+0800)
Subject: ARM: dts: aspeed: fp5280g2: Add LED configuration
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d52ce2beca2a00b0e49a86f3b31d08d94e388fdf;p=openwrt%2Fstaging%2Fblogic.git

ARM: dts: aspeed: fp5280g2: Add LED configuration

Change BMC init-ok from GPIO to LED, which needs to blink when BMC
initialization is complete.

Use TAB to align some lines.

Signed-off-by: Chicago Duan <duanzhijia01@inspur.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---

diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
index e9d714a46a60..2339913b2171 100644
--- a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
@@ -148,14 +148,48 @@
 	};
 
 	leds {
-	    compatible = "gpio-leds";
+		compatible = "gpio-leds";
 
-	    power {
-		    label = "power";
-		    /* TODO: dummy gpio */
-		    gpios = <&gpio ASPEED_GPIO(R, 1) GPIO_ACTIVE_LOW>;
-	    };
+		power {
+			label = "power";
+			/* TODO: dummy gpio */
+			gpios = <&gpio ASPEED_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		init-ok {
+			label = "init-ok";
+			gpios = <&gpio ASPEED_GPIO(B, 7) GPIO_ACTIVE_LOW>;
+		};
+
+		front-memory {
+			label = "front-memory";
+			gpios = <&gpio ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		front-syshot {
+			label = "front-syshot";
+			gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		front-syshealth {
+			label = "front-syshealth";
+			gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
+		};
 
+		front-fan {
+			label = "front-fan";
+			gpios = <&gpio ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		front-psu {
+			label = "front-psu";
+			gpios = <&gpio ASPEED_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			label = "identify";
+			gpios = <&gpio ASPEED_GPIO(Z, 7) GPIO_ACTIVE_LOW>;
+		};
 	};
 
 	iio-hwmon-battery {
@@ -749,15 +783,6 @@
 	aspeed,external-nodes = <&gfx &lhc>;
 };
 
-&gpio {
-	pin_gpio_b7 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(B,7) GPIO_ACTIVE_LOW>;
-		output-high;
-		line-name = "BMC_INIT_OK";
-	};
-};
-
 &wdt1 {
 	aspeed,reset-type = "none";
 	aspeed,external-signal;