From: Linus Walleij Date: Fri, 16 Dec 2022 20:52:44 +0000 (+0100) Subject: bcm53xx: Add D-Link DWL-8610AP board settings X-Git-Tag: v23.05.0-rc1~911 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d51c44a3ba34940ffd4ff0592875bffa23b7cec7;p=openwrt%2Fopenwrt.git bcm53xx: Add D-Link DWL-8610AP board settings The D-Link DWL-8610AP does not make use of the B53 switch like most equipment. It lies dormant and the machine is using eth0 and eth1 directly. Signed-off-by: Linus Walleij --- diff --git a/target/linux/bcm53xx/base-files/etc/board.d/02_network b/target/linux/bcm53xx/base-files/etc/board.d/02_network index c2e5afc5ed..6bec600540 100644 --- a/target/linux/bcm53xx/base-files/etc/board.d/02_network +++ b/target/linux/bcm53xx/base-files/etc/board.d/02_network @@ -16,6 +16,9 @@ bcm53xx_setup_interfaces() asus,rt-ac88u) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 extsw" "wan" ;; + dlink,dwl-8610ap) + ucidef_set_interface_lan "eth0 eth1" "dhcp" + ;; linksys,panamera) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5 lan6 lan7 lan8 extsw" "wan" ;;