From: Nick Hainke <vincent@systemli.org>
Date: Thu, 15 Dec 2022 17:18:16 +0000 (+0100)
Subject: ath79: convert OpenMesh OM2P v1 WiFis to nvmem-cells
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d4ec4f9d0b83fbb79bbcd14e1022069e0024e46b;p=openwrt%2Fstaging%2Fdangole.git

ath79: convert OpenMesh OM2P v1 WiFis to nvmem-cells

Pull the calibration data from the nvmem subsystem. This allows us to
move userspace caldata extraction into the device-tree definition.

Merge art into partition node.

Signed-off-by: Nick Hainke <vincent@systemli.org>
---

diff --git a/target/linux/ath79/dts/ar7240_openmesh_om2p-v1.dts b/target/linux/ath79/dts/ar7240_openmesh_om2p-v1.dts
index 456724a750..a66d914015 100644
--- a/target/linux/ath79/dts/ar7240_openmesh_om2p-v1.dts
+++ b/target/linux/ath79/dts/ar7240_openmesh_om2p-v1.dts
@@ -122,10 +122,26 @@
 				reg = <0x8c0000 0x700000>;
 			};
 
-			art: partition@fc0000 {
+			partition@fc0000 {
 				label = "ART";
 				reg = <0xfc0000 0x040000>;
 				read-only;
+
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				macaddr_art_0: macaddr@0 {
+					reg = <0x0 0x6>;
+				};
+
+				macaddr_art_6: macaddr@6 {
+					reg = <0x6 0x6>;
+				};
+
+				calibration_art_1000: calibration@1000 {
+					reg = <0x1000 0x440>;
+				};
 			};
 		};
 	};
@@ -149,22 +165,9 @@
 	wifi@0,0 {
 		compatible = "pci168c,002a";
 		reg = <0x0000 0 0 0 0>;
-		qca,no-eeprom;
+		nvmem-cells = <&calibration_art_1000>;
+		nvmem-cell-names = "calibration";
 		#gpio-cells = <2>;
 		gpio-controller;
 	};
 };
-
-&art {
-	compatible = "nvmem-cells";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	macaddr_art_0: macaddr@0 {
-		reg = <0x0 0x6>;
-	};
-
-	macaddr_art_6: macaddr@6 {
-		reg = <0x6 0x6>;
-	};
-};
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index aa76d1bc9f..ebcac0b6b2 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -112,9 +112,6 @@ case "$FIRMWARE" in
 	tplink,tl-wr842n-v1)
 		caldata_extract "art" 0x1000 0x1000
 		;;
-	openmesh,om2p-v1)
-		caldata_extract "ART" 0x1000 0x440
-		;;
 	wd,mynet-n600|\
 	wd,mynet-n750)
 		caldata_extract "art" 0x5000 0x440