From: Peter Tyser Date: Sun, 19 Apr 2009 03:34:02 +0000 (-0500) Subject: i2c: Remove deprecated individual i2c commands X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d48eb5131d287f52bb85b4c58c8680a2e8e3b641;p=project%2Fbcm63xx%2Fu-boot.git i2c: Remove deprecated individual i2c commands The following individual I2C commands have been removed: imd, imm, inm, imw, icrc32, iprobe, iloop, isdram. The functionality of the individual commands is still available via the 'i2c' command. This change only has an impact on those boards which did not have CONFIG_I2C_CMD_TREE defined. Signed-off-by: Peter Tyser --- diff --git a/README b/README index 142dbccec1..03ad69a8b6 100644 --- a/README +++ b/README @@ -1315,11 +1315,6 @@ The following options need to be configured: clock chips. See common/cmd_i2c.c for a description of the command line interface. - CONFIG_I2C_CMD_TREE is a recommended option that places - all I2C commands under a single 'i2c' root command. The - older 'imm', 'imd', 'iprobe' etc. commands are considered - deprecated and may disappear in the future. - CONFIG_HARD_I2C selects a hardware I2C controller. CONFIG_SOFT_I2C configures u-boot to use a software (aka diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index c071df7326..fd9f9a44f8 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -1204,7 +1204,6 @@ int do_sdram (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } #endif -#if defined(CONFIG_I2C_CMD_TREE) int do_i2c_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); @@ -1314,11 +1313,9 @@ int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) cmd_usage(cmdtp); return 0; } -#endif /* CONFIG_I2C_CMD_TREE */ /***************************************************/ -#if defined(CONFIG_I2C_CMD_TREE) U_BOOT_CMD( i2c, 6, 1, do_i2c, "I2C sub-system", @@ -1341,61 +1338,6 @@ U_BOOT_CMD( "i2c sdram chip - print SDRAM configuration information\n" #endif ); -#endif /* CONFIG_I2C_CMD_TREE */ -U_BOOT_CMD( - imd, 4, 1, do_i2c_md, \ - "i2c memory display", \ - "chip address[.0, .1, .2] [# of objects]\n - i2c memory display\n" \ -); - -U_BOOT_CMD( - imm, 3, 1, do_i2c_mm, - "i2c memory modify (auto-incrementing)", - "chip address[.0, .1, .2]\n" - " - memory modify, auto increment address\n" -); -U_BOOT_CMD( - inm, 3, 1, do_i2c_nm, - "memory modify (constant address)", - "chip address[.0, .1, .2]\n - memory modify, read and keep address\n" -); - -U_BOOT_CMD( - imw, 5, 1, do_i2c_mw, - "memory write (fill)", - "chip address[.0, .1, .2] value [count]\n - memory write (fill)\n" -); - -U_BOOT_CMD( - icrc32, 5, 1, do_i2c_crc, - "checksum calculation", - "chip address[.0, .1, .2] count\n - compute CRC32 checksum\n" -); - -U_BOOT_CMD( - iprobe, 1, 1, do_i2c_probe, - "probe to discover valid I2C chip addresses", - "\n -discover valid I2C chip addresses\n" -); - -/* - * Require full name for "iloop" because it is an infinite loop! - */ -U_BOOT_CMD( - iloop, 5, 1, do_i2c_loop, - "infinite loop on address range", - "chip address[.0, .1, .2] [# of objects]\n" - " - loop, reading a set of addresses\n" -); - -#if defined(CONFIG_CMD_SDRAM) -U_BOOT_CMD( - isdram, 2, 1, do_sdram, - "print SDRAM configuration information", - "chip\n - print SDRAM configuration information\n" - " (valid chip values 50..57)\n" -); -#endif #if defined(CONFIG_I2C_MUX) diff --git a/doc/feature-removal-schedule.txt b/doc/feature-removal-schedule.txt index b1f0582f7b..9bbdc0a832 100644 --- a/doc/feature-removal-schedule.txt +++ b/doc/feature-removal-schedule.txt @@ -59,18 +59,6 @@ Who: Wolfgang Denk and board maintainers --------------------------- -What: Individual I2C commands -When: April 2009 -Why: Per the U-Boot README, individual I2C commands such as "imd", "imm", - "imw", etc are deprecated. The single "i2c" command which is - currently enabled via CONFIG_I2C_CMD_TREE contains the same - functionality as the individual I2C commands. The individual - I2C commands should be removed as well as any references to - CONFIG_I2C_CMD_TREE. -Who: Peter Tyser - ---------------------------- - What: Legacy NAND code When: April 2009 Why: Legacy NAND code is deprecated. Similar functionality exists in diff --git a/include/configs/DU405.h b/include/configs/DU405.h index d1edd244b4..cfb3023318 100644 --- a/include/configs/DU405.h +++ b/include/configs/DU405.h @@ -211,7 +211,6 @@ /*----------------------------------------------------------------------- * I2C EEPROM (CAT24WC08) for environment */ -#define CONFIG_I2C_CMD_TREE 1 #define CONFIG_HARD_I2C /* I2c with hardware support */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/DU440.h b/include/configs/DU440.h index e6abbdc5f3..e9ea1bf7d0 100644 --- a/include/configs/DU440.h +++ b/include/configs/DU440.h @@ -170,7 +170,6 @@ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F -#define CONFIG_I2C_CMD_TREE 1 #define CONFIG_I2C_MULTI_BUS 1 #define CONFIG_SYS_SPD_BUS_NUM 0 diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 21aedee872..52d27a1e40 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -321,7 +321,6 @@ #define CONFIG_HARD_I2C /* I2C with hardware support*/ #define CONFIG_FSL_I2C #define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_CMD_TREE #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F #define CONFIG_SYS_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 2d2799e111..35ab88f080 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -315,7 +315,6 @@ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CONFIG_FSL_I2C #define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_CMD_TREE #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F #define CONFIG_SYS_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index ab6fe55c49..ef0a09fbd7 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -95,7 +95,6 @@ #define CONFIG_FSL_I2C #define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_CMD_TREE #define CONFIG_SYS_I2C_OFFSET 0x3000 #define CONFIG_SYS_I2C2_OFFSET 0x3100 #define CONFIG_SYS_SPD_BUS_NUM 1 /* The I2C bus for SPD */ diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h index 477a1c5821..138750459d 100644 --- a/include/configs/MPC8360ERDK.h +++ b/include/configs/MPC8360ERDK.h @@ -265,7 +265,6 @@ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CONFIG_FSL_I2C #define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_CMD_TREE #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F #define CONFIG_SYS_I2C_NOPROBES {{0x52}} /* Don't probe these addrs */ diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index bbb448d55f..bc1267f49f 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -337,7 +337,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_HARD_I2C /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_CMD_TREE #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F #define CONFIG_SYS_I2C_NOPROBES {{0, 0x29}} /* Don't probe these addrs */ diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 77224d98e7..ac34047371 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -287,7 +287,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_CMD_TREE #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index 0ee40c6180..77946ceae4 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -239,7 +239,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_CMD_TREE #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F #define CONFIG_SYS_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index b60b3641f4..2aba689664 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -378,7 +378,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_HARD_I2C /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_CMD_TREE #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 #define CONFIG_SYS_I2C_SLAVE 0x7F diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h index 8f741f58bb..9fd27e3d57 100644 --- a/include/configs/MVBLM7.h +++ b/include/configs/MVBLM7.h @@ -53,7 +53,6 @@ #define CONFIG_FSL_I2C #define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_CMD_TREE #define CONFIG_SYS_I2C_OFFSET 0x3000 #define CONFIG_SYS_I2C2_OFFSET 0x3100 diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h index fc48bc1db6..012ae798d1 100644 --- a/include/configs/PMC440.h +++ b/include/configs/PMC440.h @@ -230,7 +230,6 @@ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F -#define CONFIG_I2C_CMD_TREE 1 #define CONFIG_I2C_MULTI_BUS 1 #define CONFIG_SYS_I2C_MULTI_EEPROMS diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h index 79582e16c7..88ea7c7c93 100644 --- a/include/configs/SIMPC8313.h +++ b/include/configs/SIMPC8313.h @@ -223,7 +223,6 @@ #define CONFIG_HARD_I2C /* I2C with hardware support*/ #define CONFIG_FSL_I2C #define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_CMD_TREE #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F #define CONFIG_SYS_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ diff --git a/include/configs/XPEDITE5200.h b/include/configs/XPEDITE5200.h index 370aae1c4c..89ab69272b 100644 --- a/include/configs/XPEDITE5200.h +++ b/include/configs/XPEDITE5200.h @@ -226,7 +226,6 @@ #define CONFIG_SYS_I2C_OFFSET 0x3000 #define CONFIG_SYS_I2C2_OFFSET 0x3100 #define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_CMD_TREE /* I2C EEPROM */ #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 diff --git a/include/configs/XPEDITE5370.h b/include/configs/XPEDITE5370.h index a353a14e7d..536e063385 100644 --- a/include/configs/XPEDITE5370.h +++ b/include/configs/XPEDITE5370.h @@ -244,7 +244,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_I2C_OFFSET 0x3000 #define CONFIG_SYS_I2C2_OFFSET 0x3100 #define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_CMD_TREE /* PEX8518 slave I2C interface */ #define CONFIG_SYS_I2C_PEX8518_ADDR 0x70 diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h index d87902468e..b1420fa888 100644 --- a/include/configs/ads5121.h +++ b/include/configs/ads5121.h @@ -287,7 +287,6 @@ #define CONFIG_HARD_I2C /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* so disable bit-banged I2C */ #define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_CMD_TREE #define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F #if 0 diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h index a018873fd6..c898c73046 100644 --- a/include/configs/at91rm9200ek.h +++ b/include/configs/at91rm9200ek.h @@ -266,7 +266,6 @@ #ifdef CONFIG_HARD_I2C #define CONFIG_CMD_I2C -#define CONFIG_I2C_CMD_TREE #define CONFIG_SYS_I2C_SPEED 0 /* not used */ #define CONFIG_SYS_I2C_SLAVE 0 /* not used */ #endif diff --git a/include/configs/katmai.h b/include/configs/katmai.h index 0d89594f20..3840267312 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -129,7 +129,6 @@ #define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ #define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_CMD_TREE #define CONFIG_SYS_SPD_BUS_NUM 0 /* The I2C bus for SPD */ #define IIC0_BOOTPROM_ADDR 0x50 diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h index b2e37ec222..0fcf692d18 100644 --- a/include/configs/keymile-common.h +++ b/include/configs/keymile-common.h @@ -97,7 +97,6 @@ #define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID bits */ #define CONFIG_I2C_MULTI_BUS 1 -#define CONFIG_I2C_CMD_TREE 1 #define CONFIG_SYS_MAX_I2C_BUS 2 #define CONFIG_SYS_I2C_INIT_BOARD 1 #define CONFIG_I2C_MUX 1 diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h index f7fc6c5bff..61250adfed 100644 --- a/include/configs/kmeter1.h +++ b/include/configs/kmeter1.h @@ -314,7 +314,6 @@ #define CONFIG_SYS_I2C_SLAVE 0x7F #define CONFIG_SYS_I2C_OFFSET 0x3000 #define CONFIG_I2C_MULTI_BUS 1 -#define CONFIG_I2C_CMD_TREE 1 #define CONFIG_SYS_MAX_I2C_BUS 2 #define CONFIG_I2C_MUX 1 diff --git a/include/configs/korat.h b/include/configs/korat.h index eb2c1d43b4..ea6ba8938d 100644 --- a/include/configs/korat.h +++ b/include/configs/korat.h @@ -282,7 +282,6 @@ #define CONFIG_CMD_ELF #define CONFIG_CMD_FAT #define CONFIG_CMD_I2C -#define CONFIG_I2C_CMD_TREE #define CONFIG_CMD_IRQ #define CONFIG_CMD_MII #define CONFIG_CMD_NET diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index edd928d81b..b89fe12c56 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -279,7 +279,6 @@ #define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CONFIG_FSL_I2C -#define CONFIG_I2C_CMD_TREE #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F #define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */ diff --git a/include/configs/socrates.h b/include/configs/socrates.h index becd13eace..5b91b4d7c7 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -243,7 +243,6 @@ #define CONFIG_SYS_I2C_OFFSET 0x3000 #define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_CMD_TREE #define CONFIG_SYS_I2C2_OFFSET 0x3100 /* I2C RTC */