From: Lin Huang <hl@rock-chips.com>
Date: Mon, 23 Apr 2018 10:49:48 +0000 (+0200)
Subject: drm/bridge: analogix_dp: Reset aux channel if an error occurred
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d44ba84433a2e42aa14fc5b9cc228050f0783e5c;p=openwrt%2Fstaging%2Fblogic.git

drm/bridge: analogix_dp: Reset aux channel if an error occurred

AUX errors are caused by many different reasons. We may not know what
happened in aux channel on failure, so let's reset aux channel if some
errors occurred.

Cc: 征增 王 <wzz@rock-chips.com>
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-13-enric.balletbo@collabora.com
---

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index dee1ba109b5f..7b7fd227e1f9 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -466,6 +466,10 @@ void analogix_dp_init_aux(struct analogix_dp_device *dp)
 	reg = RPLY_RECEIV | AUX_ERR;
 	writel(reg, dp->reg_base + ANALOGIX_DP_INT_STA);
 
+	analogix_dp_set_analog_power_down(dp, AUX_BLOCK, true);
+	usleep_range(10, 11);
+	analogix_dp_set_analog_power_down(dp, AUX_BLOCK, false);
+
 	analogix_dp_reset_aux(dp);
 
 	/* Disable AUX transaction H/W retry */
@@ -1159,7 +1163,7 @@ ssize_t analogix_dp_transfer(struct analogix_dp_device *dp,
 				 reg, !(reg & AUX_EN), 25, 500 * 1000);
 	if (ret) {
 		dev_err(dp->dev, "AUX CH enable timeout!\n");
-		return -ETIMEDOUT;
+		goto aux_error;
 	}
 
 	/* TODO: Wait for an interrupt instead of looping? */
@@ -1168,7 +1172,7 @@ ssize_t analogix_dp_transfer(struct analogix_dp_device *dp,
 				 reg, reg & RPLY_RECEIV, 10, 20 * 1000);
 	if (ret) {
 		dev_err(dp->dev, "AUX CH cmd reply timeout!\n");
-		return -ETIMEDOUT;
+		goto aux_error;
 	}
 
 	/* Clear interrupt source for AUX CH command reply */
@@ -1178,7 +1182,7 @@ ssize_t analogix_dp_transfer(struct analogix_dp_device *dp,
 	reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
 	if (reg & AUX_ERR) {
 		writel(AUX_ERR, dp->reg_base + ANALOGIX_DP_INT_STA);
-		return -EREMOTEIO;
+		goto aux_error;
 	}
 
 	/* Check AUX CH error access status */
@@ -1186,7 +1190,7 @@ ssize_t analogix_dp_transfer(struct analogix_dp_device *dp,
 	if ((reg & AUX_STATUS_MASK)) {
 		dev_err(dp->dev, "AUX CH error happened: %d\n\n",
 			reg & AUX_STATUS_MASK);
-		return -EREMOTEIO;
+		goto aux_error;
 	}
 
 	if (msg->request & DP_AUX_I2C_READ) {
@@ -1212,4 +1216,10 @@ ssize_t analogix_dp_transfer(struct analogix_dp_device *dp,
 		msg->reply = DP_AUX_NATIVE_REPLY_ACK;
 
 	return num_transferred > 0 ? num_transferred : -EBUSY;
+
+aux_error:
+	/* if aux err happen, reset aux */
+	analogix_dp_init_aux(dp);
+
+	return -EREMOTEIO;
 }