From: Adrian Schmutzler Date: Sat, 15 Aug 2020 15:21:35 +0000 (+0200) Subject: bcm63xx: reorganize board patches X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d43b963b3d1172fbe7e3f57f88da11e4d7e54c95;p=openwrt%2Fstaging%2Fthess.git bcm63xx: reorganize board patches This renames board patches to make finding devices easier and reorders them based on their board. The devices are grouped based on the board/cpu_id. New device patches should be numbered based on their group. Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/bcm63xx/patches-5.4/369-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch b/target/linux/bcm63xx/patches-5.4/369-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch deleted file mode 100644 index 0221e75bfc..0000000000 --- a/target/linux/bcm63xx/patches-5.4/369-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch +++ /dev/null @@ -1,69 +0,0 @@ -From e71eea9953c774dfadb754258824fb1888c279f4 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Fri, 21 Nov 2014 16:54:06 +0100 -Subject: [PATCH 47/48] MIPS: BCM63XX: populate the compatible to board_info - list - -Populate the compatible to board_info list to allow dtbs to be used -for known boards. - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 34 +++++++++++++++++++++++++++++ - 1 file changed, 34 insertions(+) - ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -693,6 +693,52 @@ static const struct board_info __initcon - }; - - static struct of_device_id const bcm963xx_boards_dt[] = { -+#ifdef CONFIG_OF -+#ifdef CONFIG_BCM63XX_CPU_3368 -+ { .compatible = "netgear,cvg834g", .data = &board_cvg834g, }, -+#endif /* CONFIG_BCM63XX_CPU_3368 */ -+#ifdef CONFIG_BCM63XX_CPU_6318 -+#endif /* CONFIG_BCM63XX_CPU_6318 */ -+#ifdef CONFIG_BCM63XX_CPU_6328 -+ { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, -+#endif /* CONFIG_BCM63XX_CPU_6328 */ -+#ifdef CONFIG_BCM63XX_CPU_6338 -+ { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, }, -+ { .compatible = "brcm,bcm96338w", .data = &board_96338w, }, -+#endif /* CONFIG_BCM63XX_CPU_6338 */ -+#ifdef CONFIG_BCM63XX_CPU_6345 -+ { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, }, -+#endif /* CONFIG_BCM63XX_CPU_6345 */ -+#ifdef CONFIG_BCM63XX_CPU_6348 -+ { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, }, -+ { .compatible = "brcm,bcm96348r", .data = &board_96348r, }, -+ { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, }, -+ { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, }, -+ { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, }, -+ { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, }, -+ { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, }, -+ { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, }, -+ { .compatible = "sagem,fast-2404", .data = &board_FAST2404, }, -+ { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, }, -+ { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, }, -+#endif /* CONFIG_BCM63XX_CPU_6348 */ -+#ifdef CONFIG_BCM63XX_CPU_6358 -+ { .compatible = "alcatel,rg100a", .data = &board_96358vw2, }, -+ { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, }, -+ { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, }, -+ { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, }, -+ { .compatible = "pirelli,a226g", .data = &board_DWVS0, }, -+ { .compatible = "pirelli,a226m", .data = &board_DWVS0, }, -+ { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, }, -+ { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, }, -+#endif /* CONFIG_BCM63XX_CPU_6358 */ -+#ifdef CONFIG_BCM63XX_CPU_6362 -+#endif /* CONFIG_BCM63XX_CPU_6362 */ -+#ifdef CONFIG_BCM63XX_CPU_6368 -+#endif /* CONFIG_BCM63XX_CPU_6368 */ -+#ifdef CONFIG_BCM63XX_CPU_63268 -+#endif /* CONFIG_BCM63XX_CPU_63268 */ -+#endif /* CONFIG_OF */ - { }, - }; - diff --git a/target/linux/bcm63xx/patches-5.4/500-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch b/target/linux/bcm63xx/patches-5.4/500-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch new file mode 100644 index 0000000000..62f872dd32 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/500-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch @@ -0,0 +1,69 @@ +From e71eea9953c774dfadb754258824fb1888c279f4 Mon Sep 17 00:00:00 2001 +From: Jonas Gorski +Date: Fri, 21 Nov 2014 16:54:06 +0100 +Subject: [PATCH 47/48] MIPS: BCM63XX: populate the compatible to board_info + list + +Populate the compatible to board_info list to allow dtbs to be used +for known boards. + +Signed-off-by: Jonas Gorski +--- + arch/mips/bcm63xx/boards/board_bcm963xx.c | 34 +++++++++++++++++++++++++++++ + 1 file changed, 34 insertions(+) + +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -439,6 +439,52 @@ static const struct board_info __initcon + }; + + static struct of_device_id const bcm963xx_boards_dt[] = { ++#ifdef CONFIG_OF ++#ifdef CONFIG_BCM63XX_CPU_3368 ++ { .compatible = "netgear,cvg834g", .data = &board_cvg834g, }, ++#endif /* CONFIG_BCM63XX_CPU_3368 */ ++#ifdef CONFIG_BCM63XX_CPU_6318 ++#endif /* CONFIG_BCM63XX_CPU_6318 */ ++#ifdef CONFIG_BCM63XX_CPU_6328 ++ { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, ++#endif /* CONFIG_BCM63XX_CPU_6328 */ ++#ifdef CONFIG_BCM63XX_CPU_6338 ++ { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, }, ++ { .compatible = "brcm,bcm96338w", .data = &board_96338w, }, ++#endif /* CONFIG_BCM63XX_CPU_6338 */ ++#ifdef CONFIG_BCM63XX_CPU_6345 ++ { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, }, ++#endif /* CONFIG_BCM63XX_CPU_6345 */ ++#ifdef CONFIG_BCM63XX_CPU_6348 ++ { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, }, ++ { .compatible = "brcm,bcm96348r", .data = &board_96348r, }, ++ { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, }, ++ { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, }, ++ { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, }, ++ { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, }, ++ { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, }, ++ { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, }, ++ { .compatible = "sagem,fast-2404", .data = &board_FAST2404, }, ++ { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, }, ++ { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, }, ++#endif /* CONFIG_BCM63XX_CPU_6348 */ ++#ifdef CONFIG_BCM63XX_CPU_6358 ++ { .compatible = "alcatel,rg100a", .data = &board_96358vw2, }, ++ { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, }, ++ { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, }, ++ { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, }, ++ { .compatible = "pirelli,a226g", .data = &board_DWVS0, }, ++ { .compatible = "pirelli,a226m", .data = &board_DWVS0, }, ++ { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, }, ++ { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, }, ++#endif /* CONFIG_BCM63XX_CPU_6358 */ ++#ifdef CONFIG_BCM63XX_CPU_6362 ++#endif /* CONFIG_BCM63XX_CPU_6362 */ ++#ifdef CONFIG_BCM63XX_CPU_6368 ++#endif /* CONFIG_BCM63XX_CPU_6368 */ ++#ifdef CONFIG_BCM63XX_CPU_63268 ++#endif /* CONFIG_BCM63XX_CPU_63268 */ ++#endif /* CONFIG_OF */ + { }, + }; + diff --git a/target/linux/bcm63xx/patches-5.4/500-board-D4PW.patch b/target/linux/bcm63xx/patches-5.4/500-board-D4PW.patch deleted file mode 100644 index 399fda760d..0000000000 --- a/target/linux/bcm63xx/patches-5.4/500-board-D4PW.patch +++ /dev/null @@ -1,40 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -294,6 +294,21 @@ static struct board_info __initdata boar - - .has_ohci0 = 1, - }; -+ -+static struct board_info __initdata board_96348_D4PW = { -+ .name = "D-4P-W", -+ .expected_cpu_id = 0x6348, -+ -+ .has_pci = 1, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6348 */ - - /* -@@ -429,6 +444,7 @@ static const struct board_info __initcon - &board_DV201AMR, - &board_96348gw_a, - &board_rta1025w_16, -+ &board_96348_D4PW, - #endif /* CONFIG_BCM63XX_CPU_6348 */ - #ifdef CONFIG_BCM63XX_CPU_6358 - &board_96358vw, -@@ -461,6 +477,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, }, - { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, }, - { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, }, -+ { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, }, - { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, }, - { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, }, - { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, }, diff --git a/target/linux/bcm63xx/patches-5.4/501-board-NB4.patch b/target/linux/bcm63xx/patches-5.4/501-board-NB4.patch deleted file mode 100644 index 9eb7655d33..0000000000 --- a/target/linux/bcm63xx/patches-5.4/501-board-NB4.patch +++ /dev/null @@ -1,77 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -416,6 +416,56 @@ static struct board_info __initdata boar - - .has_ohci0 = 1, - }; -+ -+static struct board_info __initdata board_nb4_ser_r0 = { -+ .name = "NB4-SER-r0", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pccard = 1, -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+ -+static struct board_info __initdata board_nb4_fxc_r1 = { -+ .name = "NB4-FXC-r1", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pccard = 1, -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6358 */ - - /* -@@ -451,6 +501,8 @@ static const struct board_info __initcon - &board_96358vw2, - &board_AGPFS0, - &board_DWVS0, -+ &board_nb4_ser_r0, -+ &board_nb4_fxc_r1, - #endif /* CONFIG_BCM63XX_CPU_6358 */ - }; - -@@ -494,6 +546,8 @@ static struct of_device_id const bcm963x - { .compatible = "pirelli,a226m", .data = &board_DWVS0, }, - { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, }, - { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, }, -+ { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, }, -+ { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, }, - #endif /* CONFIG_BCM63XX_CPU_6358 */ - #ifdef CONFIG_BCM63XX_CPU_6362 - #endif /* CONFIG_BCM63XX_CPU_6362 */ diff --git a/target/linux/bcm63xx/patches-5.4/501-board_bcm6318-brcm-bcm96318ref.patch b/target/linux/bcm63xx/patches-5.4/501-board_bcm6318-brcm-bcm96318ref.patch new file mode 100644 index 0000000000..0313285eaa --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/501-board_bcm6318-brcm-bcm96318ref.patch @@ -0,0 +1,74 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -49,6 +49,53 @@ static struct board_info __initdata boar + #endif /* CONFIG_BCM63XX_CPU_3368 */ + + /* ++ * known 6318 boards ++ */ ++#ifdef CONFIG_BCM63XX_CPU_6318 ++static struct board_info __initdata board_96318ref = { ++ .name = "96318REF", ++ .expected_cpu_id = 0x6318, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_usbd = 1, ++ .usbd = { ++ .use_fullspeed = 0, ++ .port_no = 0, ++ }, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 4", ++ }, ++ }, ++ }, ++}; ++#endif /* CONFIG_BCM63XX_CPU_6318 */ ++ ++/* + * known 6328 boards + */ + #ifdef CONFIG_BCM63XX_CPU_6328 +@@ -410,6 +457,9 @@ static const struct board_info __initcon + #ifdef CONFIG_BCM63XX_CPU_3368 + &board_cvg834g, + #endif /* CONFIG_BCM63XX_CPU_3368 */ ++#ifdef CONFIG_BCM63XX_CPU_6318 ++ &board_96318ref, ++#endif /* CONFIG_BCM63XX_CPU_6318 */ + #ifdef CONFIG_BCM63XX_CPU_6328 + &board_96328avng, + #endif /* CONFIG_BCM63XX_CPU_6328 */ +@@ -444,6 +494,7 @@ static struct of_device_id const bcm963x + { .compatible = "netgear,cvg834g", .data = &board_cvg834g, }, + #endif /* CONFIG_BCM63XX_CPU_3368 */ + #ifdef CONFIG_BCM63XX_CPU_6318 ++ { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, }, + #endif /* CONFIG_BCM63XX_CPU_6318 */ + #ifdef CONFIG_BCM63XX_CPU_6328 + { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, diff --git a/target/linux/bcm63xx/patches-5.4/502-board-96338W2_E7T.patch b/target/linux/bcm63xx/patches-5.4/502-board-96338W2_E7T.patch deleted file mode 100644 index ccf9fa5ce4..0000000000 --- a/target/linux/bcm63xx/patches-5.4/502-board-96338W2_E7T.patch +++ /dev/null @@ -1,38 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -98,6 +98,19 @@ static struct board_info __initdata boar - .force_duplex_full = 1, - }, - }; -+ -+static struct board_info __initdata board_96338w2_e7t = { -+ .name = "96338W2_E7T", -+ .expected_cpu_id = 0x6338, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6338 */ - - /* -@@ -481,6 +494,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6338 - &board_96338gw, - &board_96338w, -+ &board_96338w2_e7t, - #endif /* CONFIG_BCM63XX_CPU_6338 */ - #ifdef CONFIG_BCM63XX_CPU_6345 - &board_96345gw2, -@@ -519,6 +533,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_6338 - { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, }, - { .compatible = "brcm,bcm96338w", .data = &board_96338w, }, -+ { .compatible = "d-link,dsl-2640u", .data = &board_96338w2_e7t, }, - #endif /* CONFIG_BCM63XX_CPU_6338 */ - #ifdef CONFIG_BCM63XX_CPU_6345 - { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, }, diff --git a/target/linux/bcm63xx/patches-5.4/502-board_bcm6318-brcm-bcm96318ref-p300.patch b/target/linux/bcm63xx/patches-5.4/502-board_bcm6318-brcm-bcm96318ref-p300.patch new file mode 100644 index 0000000000..1796d066a5 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/502-board_bcm6318-brcm-bcm96318ref-p300.patch @@ -0,0 +1,67 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -93,6 +93,48 @@ static struct board_info __initdata boar + }, + }, + }; ++ ++static struct board_info __initdata board_96318ref_p300 = { ++ .name = "96318REF_P300", ++ .expected_cpu_id = 0x6318, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_usbd = 1, ++ .usbd = { ++ .use_fullspeed = 0, ++ .port_no = 0, ++ }, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 4", ++ }, ++ }, ++ }, ++}; + #endif /* CONFIG_BCM63XX_CPU_6318 */ + + /* +@@ -459,6 +501,7 @@ static const struct board_info __initcon + #endif /* CONFIG_BCM63XX_CPU_3368 */ + #ifdef CONFIG_BCM63XX_CPU_6318 + &board_96318ref, ++ &board_96318ref_p300, + #endif /* CONFIG_BCM63XX_CPU_6318 */ + #ifdef CONFIG_BCM63XX_CPU_6328 + &board_96328avng, +@@ -495,6 +538,7 @@ static struct of_device_id const bcm963x + #endif /* CONFIG_BCM63XX_CPU_3368 */ + #ifdef CONFIG_BCM63XX_CPU_6318 + { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, }, ++ { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, }, + #endif /* CONFIG_BCM63XX_CPU_6318 */ + #ifdef CONFIG_BCM63XX_CPU_6328 + { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, diff --git a/target/linux/bcm63xx/patches-5.4/503-board-CPVA642.patch b/target/linux/bcm63xx/patches-5.4/503-board-CPVA642.patch deleted file mode 100644 index 26a107c6b5..0000000000 --- a/target/linux/bcm63xx/patches-5.4/503-board-CPVA642.patch +++ /dev/null @@ -1,42 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -382,6 +382,23 @@ static struct board_info __initdata boar - .num_usbh_ports = 2, - }; - -+static struct board_info __initdata board_CPVA642 = { -+ .name = "CPVA642", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+ - static struct board_info __initdata board_AGPFS0 = { - .name = "AGPF-S0", - .expected_cpu_id = 0x6358, -@@ -514,6 +531,7 @@ static const struct board_info __initcon - &board_96358vw, - &board_96358vw2, - &board_AGPFS0, -+ &board_CPVA642, - &board_DWVS0, - &board_nb4_ser_r0, - &board_nb4_fxc_r1, -@@ -563,6 +581,7 @@ static struct of_device_id const bcm963x - { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, }, - { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, }, - { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, }, -+ { .compatible = "telsey,cpva642", .data = &board_CPVA642, }, - #endif /* CONFIG_BCM63XX_CPU_6358 */ - #ifdef CONFIG_BCM63XX_CPU_6362 - #endif /* CONFIG_BCM63XX_CPU_6362 */ diff --git a/target/linux/bcm63xx/patches-5.4/503-board_bcm6318-d-link-dsl-275xb-d.patch b/target/linux/bcm63xx/patches-5.4/503-board_bcm6318-d-link-dsl-275xb-d.patch new file mode 100644 index 0000000000..05022aa277 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/503-board_bcm6318-d-link-dsl-275xb-d.patch @@ -0,0 +1,91 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -135,6 +135,72 @@ static struct board_info __initdata boar + }, + }, + }; ++ ++static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = { ++ { .offset = 96, .value = 0x2046 }, ++ { .offset = 97, .value = 0xfe9d }, ++ { .offset = 98, .value = 0x1854 }, ++ { .offset = 99, .value = 0xfa59 }, ++ { .offset = 112, .value = 0x2046 }, ++ { .offset = 113, .value = 0xfe79 }, ++ { .offset = 114, .value = 0x17f5 }, ++ { .offset = 115, .value = 0xfa47 }, ++ { .offset = 161, .value = 0x2222 }, ++ { .offset = 162, .value = 0x2222 }, ++ { .offset = 169, .value = 0x2222 }, ++ { .offset = 170, .value = 0x2222 }, ++ { .offset = 171, .value = 0x5555 }, ++ { .offset = 172, .value = 0x5555 }, ++ { .offset = 173, .value = 0x4444 }, ++ { .offset = 174, .value = 0x4444 }, ++ { .offset = 175, .value = 0x5555 }, ++ { .offset = 176, .value = 0x5555 }, ++}; ++ ++static struct board_info __initdata board_dsl_2751b_d1 = { ++ .name = "AW5200B", ++ .expected_cpu_id = 0x6318, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 4", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM43217, ++ .pci_bus = 1, ++ .pci_dev = 0, ++ .board_fixups = dsl2751b_e1_fixups, ++ .num_board_fixups = ARRAY_SIZE(dsl2751b_e1_fixups), ++ }, ++}; + #endif /* CONFIG_BCM63XX_CPU_6318 */ + + /* +@@ -502,6 +568,7 @@ static const struct board_info __initcon + #ifdef CONFIG_BCM63XX_CPU_6318 + &board_96318ref, + &board_96318ref_p300, ++ &board_dsl_2751b_d1, + #endif /* CONFIG_BCM63XX_CPU_6318 */ + #ifdef CONFIG_BCM63XX_CPU_6328 + &board_96328avng, +@@ -539,6 +606,7 @@ static struct of_device_id const bcm963x + #ifdef CONFIG_BCM63XX_CPU_6318 + { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, }, + { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, }, ++ { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, }, + #endif /* CONFIG_BCM63XX_CPU_6318 */ + #ifdef CONFIG_BCM63XX_CPU_6328 + { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, diff --git a/target/linux/bcm63xx/patches-5.4/504-board_bcm6318-sagem-fast-2704n.patch b/target/linux/bcm63xx/patches-5.4/504-board_bcm6318-sagem-fast-2704n.patch new file mode 100644 index 0000000000..2bb1f60241 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/504-board_bcm6318-sagem-fast-2704n.patch @@ -0,0 +1,68 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -201,6 +201,49 @@ static struct board_info __initdata boar + .num_board_fixups = ARRAY_SIZE(dsl2751b_e1_fixups), + }, + }; ++ ++static struct board_info __initdata board_FAST2704N = { ++ .name = "F@ST2704N", ++ .expected_cpu_id = 0x6318, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 4", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM43217, ++ .pci_bus = 1, ++ .pci_dev = 0, ++ }, ++}; + #endif /* CONFIG_BCM63XX_CPU_6318 */ + + /* +@@ -569,6 +612,7 @@ static const struct board_info __initcon + &board_96318ref, + &board_96318ref_p300, + &board_dsl_2751b_d1, ++ &board_FAST2704N, + #endif /* CONFIG_BCM63XX_CPU_6318 */ + #ifdef CONFIG_BCM63XX_CPU_6328 + &board_96328avng, +@@ -607,6 +651,7 @@ static struct of_device_id const bcm963x + { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, }, + { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, }, + { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, }, ++ { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, }, + #endif /* CONFIG_BCM63XX_CPU_6318 */ + #ifdef CONFIG_BCM63XX_CPU_6328 + { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, diff --git a/target/linux/bcm63xx/patches-5.4/504-board_dsl_274xb_rev_c.patch b/target/linux/bcm63xx/patches-5.4/504-board_dsl_274xb_rev_c.patch deleted file mode 100644 index 90ece67f71..0000000000 --- a/target/linux/bcm63xx/patches-5.4/504-board_dsl_274xb_rev_c.patch +++ /dev/null @@ -1,41 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -447,6 +447,22 @@ static struct board_info __initdata boar - .has_ohci0 = 1, - }; - -+/* D-Link DSL-274xB revison C2/C3 */ -+static struct board_info __initdata board_dsl_274xb_rev_c = { -+ .name = "AW4139", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pci = 1, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+ - static struct board_info __initdata board_nb4_ser_r0 = { - .name = "NB4-SER-r0", - .expected_cpu_id = 0x6358, -@@ -533,6 +549,7 @@ static const struct board_info __initcon - &board_AGPFS0, - &board_CPVA642, - &board_DWVS0, -+ &board_dsl_274xb_rev_c, - &board_nb4_ser_r0, - &board_nb4_fxc_r1, - #endif /* CONFIG_BCM63XX_CPU_6358 */ -@@ -574,6 +591,7 @@ static struct of_device_id const bcm963x - { .compatible = "alcatel,rg100a", .data = &board_96358vw2, }, - { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, }, - { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, }, -+ { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, }, - { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, }, - { .compatible = "pirelli,a226g", .data = &board_DWVS0, }, - { .compatible = "pirelli,a226m", .data = &board_DWVS0, }, diff --git a/target/linux/bcm63xx/patches-5.4/505-board_bcm6318-comtrend-ar-5315u.patch b/target/linux/bcm63xx/patches-5.4/505-board_bcm6318-comtrend-ar-5315u.patch new file mode 100644 index 0000000000..dc480f239d --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/505-board_bcm6318-comtrend-ar-5315u.patch @@ -0,0 +1,84 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -136,6 +136,65 @@ static struct board_info __initdata boar + }, + }; + ++static struct sprom_fixup __initdata ar5315u_fixups[] = { ++ { .offset = 6, .value = 0x1c00 }, ++ { .offset = 65, .value = 0x1255 }, ++ { .offset = 97, .value = 0xfe55 }, ++ { .offset = 98, .value = 0x171d }, ++ { .offset = 99, .value = 0xfa42 }, ++ { .offset = 113, .value = 0xfeb7 }, ++ { .offset = 114, .value = 0x18cd }, ++ { .offset = 115, .value = 0xfa4f }, ++ { .offset = 162, .value = 0x6444 }, ++ { .offset = 170, .value = 0x6444 }, ++ { .offset = 172, .value = 0x6444 }, ++}; ++ ++static struct board_info __initdata board_AR5315u = { ++ .name = "96318A-1441N1", ++ .expected_cpu_id = 0x6318, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "LAN4", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "LAN3", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "LAN2", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "LAN1", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM43217, ++ .pci_bus = 1, ++ .pci_dev = 0, ++ .board_fixups = ar5315u_fixups, ++ .num_board_fixups = ARRAY_SIZE(ar5315u_fixups), ++ }, ++}; ++ + static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = { + { .offset = 96, .value = 0x2046 }, + { .offset = 97, .value = 0xfe9d }, +@@ -611,6 +670,7 @@ static const struct board_info __initcon + #ifdef CONFIG_BCM63XX_CPU_6318 + &board_96318ref, + &board_96318ref_p300, ++ &board_AR5315u, + &board_dsl_2751b_d1, + &board_FAST2704N, + #endif /* CONFIG_BCM63XX_CPU_6318 */ +@@ -650,6 +710,7 @@ static struct of_device_id const bcm963x + #ifdef CONFIG_BCM63XX_CPU_6318 + { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, }, + { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, }, ++ { .compatible = "comtrend,ar-5315u", .data = &board_AR5315u, }, + { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, }, + { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, }, + #endif /* CONFIG_BCM63XX_CPU_6318 */ diff --git a/target/linux/bcm63xx/patches-5.4/505-board_spw500v.patch b/target/linux/bcm63xx/patches-5.4/505-board_spw500v.patch deleted file mode 100644 index 4f57d441bc..0000000000 --- a/target/linux/bcm63xx/patches-5.4/505-board_spw500v.patch +++ /dev/null @@ -1,55 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -322,6 +322,36 @@ static struct board_info __initdata boar - .force_duplex_full = 1, - }, - }; -+ -+static struct sprom_fixup __initdata spw500v_fixups[] = { -+ { .offset = 46, .value = 0x3046 }, -+ { .offset = 47, .value = 0x15a7 }, -+ { .offset = 48, .value = 0xfa89 }, -+ { .offset = 49, .value = 0xfe79 }, -+ { .offset = 57, .value = 0x6a49 }, -+}; -+ -+static struct board_info __initdata board_spw500v = { -+ .name = "SPW500V", -+ .expected_cpu_id = 0x6348, -+ -+ .has_pci = 1, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM4318, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ .board_fixups = spw500v_fixups, -+ .num_board_fixups = ARRAY_SIZE(spw500v_fixups), -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6348 */ - - /* -@@ -542,6 +572,7 @@ static const struct board_info __initcon - &board_96348gw_a, - &board_rta1025w_16, - &board_96348_D4PW, -+ &board_spw500v, - #endif /* CONFIG_BCM63XX_CPU_6348 */ - #ifdef CONFIG_BCM63XX_CPU_6358 - &board_96358vw, -@@ -584,6 +615,7 @@ static struct of_device_id const bcm963x - { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, }, - { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, }, - { .compatible = "sagem,fast-2404", .data = &board_FAST2404, }, -+ { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, }, - { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, }, - { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, }, - #endif /* CONFIG_BCM63XX_CPU_6348 */ diff --git a/target/linux/bcm63xx/patches-5.4/506-board_gw6200_gw6000.patch b/target/linux/bcm63xx/patches-5.4/506-board_gw6200_gw6000.patch deleted file mode 100644 index 1384ac6b07..0000000000 --- a/target/linux/bcm63xx/patches-5.4/506-board_gw6200_gw6000.patch +++ /dev/null @@ -1,67 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -216,6 +216,46 @@ static struct board_info __initdata boar - .has_ohci0 = 1, - }; - -+static struct board_info __initdata board_gw6200 = { -+ .name = "GW6200", -+ .expected_cpu_id = 0x6348, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+ -+static struct board_info __initdata board_gw6000 = { -+ .name = "GW6000", -+ .expected_cpu_id = 0x6348, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+ - static struct board_info __initdata board_FAST2404 = { - .name = "F@ST2404", - .expected_cpu_id = 0x6348, -@@ -565,6 +605,8 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6348 - &board_96348r, - &board_96348gw, -+ &board_gw6000, -+ &board_gw6200, - &board_96348gw_10, - &board_96348gw_11, - &board_FAST2404, -@@ -616,6 +658,8 @@ static struct of_device_id const bcm963x - { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, }, - { .compatible = "sagem,fast-2404", .data = &board_FAST2404, }, - { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, }, -+ { .compatible = "tecom,gw6000", .data = &board_gw6000, }, -+ { .compatible = "tecom,gw6200", .data = &board_gw6200, }, - { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, }, - { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, }, - #endif /* CONFIG_BCM63XX_CPU_6348 */ diff --git a/target/linux/bcm63xx/patches-5.4/507-board-MAGIC.patch b/target/linux/bcm63xx/patches-5.4/507-board-MAGIC.patch deleted file mode 100644 index 58bd2f3983..0000000000 --- a/target/linux/bcm63xx/patches-5.4/507-board-MAGIC.patch +++ /dev/null @@ -1,49 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -392,6 +392,30 @@ static struct board_info __initdata boar - .num_board_fixups = ARRAY_SIZE(spw500v_fixups), - }, - }; -+ -+static struct board_info __initdata board_96348sv = { -+ .name = "MAGIC", -+ .expected_cpu_id = 0x6348, -+ -+ .has_pccard = 1, -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ /* it has BP_ENET_EXTERNAL_PHY */ -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6348 */ - - /* -@@ -615,6 +639,7 @@ static const struct board_info __initcon - &board_rta1025w_16, - &board_96348_D4PW, - &board_spw500v, -+ &board_96348sv, - #endif /* CONFIG_BCM63XX_CPU_6348 */ - #ifdef CONFIG_BCM63XX_CPU_6358 - &board_96358vw, -@@ -660,6 +685,7 @@ static struct of_device_id const bcm963x - { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, }, - { .compatible = "tecom,gw6000", .data = &board_gw6000, }, - { .compatible = "tecom,gw6200", .data = &board_gw6200, }, -+ { .compatible = "telsey,magic", .data = &board_96348sv, }, - { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, }, - { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, }, - #endif /* CONFIG_BCM63XX_CPU_6348 */ diff --git a/target/linux/bcm63xx/patches-5.4/508-board_hw553.patch b/target/linux/bcm63xx/patches-5.4/508-board_hw553.patch deleted file mode 100644 index b03b14f96e..0000000000 --- a/target/linux/bcm63xx/patches-5.4/508-board_hw553.patch +++ /dev/null @@ -1,50 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -606,6 +606,31 @@ static struct board_info __initdata boar - .force_duplex_full = 1, - }, - }; -+ -+static struct board_info __initdata board_HW553 = { -+ .name = "HW553", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM4318, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6358 */ - - /* -@@ -650,6 +675,7 @@ static const struct board_info __initcon - &board_dsl_274xb_rev_c, - &board_nb4_ser_r0, - &board_nb4_fxc_r1, -+ &board_HW553, - #endif /* CONFIG_BCM63XX_CPU_6358 */ - }; - -@@ -695,6 +721,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, }, - { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, }, - { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, }, -+ { .compatible = "huawei,echolife-hg553", .data = &board_HW553, }, - { .compatible = "pirelli,a226g", .data = &board_DWVS0, }, - { .compatible = "pirelli,a226m", .data = &board_DWVS0, }, - { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, }, diff --git a/target/linux/bcm63xx/patches-5.4/509-board_rta1320_16m.patch b/target/linux/bcm63xx/patches-5.4/509-board_rta1320_16m.patch deleted file mode 100644 index 1cc900baf9..0000000000 --- a/target/linux/bcm63xx/patches-5.4/509-board_rta1320_16m.patch +++ /dev/null @@ -1,38 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -111,6 +111,19 @@ static struct board_info __initdata boar - .force_duplex_full = 1, - }, - }; -+ -+static struct board_info __initdata board_rta1320_16m = { -+ .name = "RTA1320_16M", -+ .expected_cpu_id = 0x6338, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6338 */ - - /* -@@ -647,6 +660,7 @@ static const struct board_info __initcon - &board_96338gw, - &board_96338w, - &board_96338w2_e7t, -+ &board_rta1320_16m, - #endif /* CONFIG_BCM63XX_CPU_6338 */ - #ifdef CONFIG_BCM63XX_CPU_6345 - &board_96345gw2, -@@ -692,6 +706,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_6338 - { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, }, - { .compatible = "brcm,bcm96338w", .data = &board_96338w, }, -+ { .compatible = "dynalink,rta1320", .data = &board_rta1320_16m, }, - { .compatible = "d-link,dsl-2640u", .data = &board_96338w2_e7t, }, - #endif /* CONFIG_BCM63XX_CPU_6338 */ - #ifdef CONFIG_BCM63XX_CPU_6345 diff --git a/target/linux/bcm63xx/patches-5.4/510-board_spw303v.patch b/target/linux/bcm63xx/patches-5.4/510-board_spw303v.patch deleted file mode 100644 index 26e99196fd..0000000000 --- a/target/linux/bcm63xx/patches-5.4/510-board_spw303v.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -644,6 +644,20 @@ static struct board_info __initdata boar - .pci_dev = 1, - }, - }; -+ -+ /* T-Home Speedport W 303V Typ B */ -+static struct board_info __initdata board_spw303v = { -+ .name = "96358-502V", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pci = 1, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6358 */ - - /* -@@ -690,6 +704,7 @@ static const struct board_info __initcon - &board_nb4_ser_r0, - &board_nb4_fxc_r1, - &board_HW553, -+ &board_spw303v, - #endif /* CONFIG_BCM63XX_CPU_6358 */ - }; - -@@ -743,6 +758,7 @@ static struct of_device_id const bcm963x - { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, }, - { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, }, - { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, }, -+ { .compatible = "t-com,speedport-w-303v", .data = &board_spw303v, }, - { .compatible = "telsey,cpva642", .data = &board_CPVA642, }, - #endif /* CONFIG_BCM63XX_CPU_6358 */ - #ifdef CONFIG_BCM63XX_CPU_6362 diff --git a/target/linux/bcm63xx/patches-5.4/511-board_V2500V.patch b/target/linux/bcm63xx/patches-5.4/511-board_V2500V.patch deleted file mode 100644 index e72c208cb3..0000000000 --- a/target/linux/bcm63xx/patches-5.4/511-board_V2500V.patch +++ /dev/null @@ -1,93 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -429,6 +429,27 @@ static struct board_info __initdata boar - .force_duplex_full = 1, - }, - }; -+ -+static struct board_info __initdata board_V2500V_BB = { -+ .name = "V2500V_BB", -+ .expected_cpu_id = 0x6348, -+ -+ .has_pci = 1, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6348 */ - - /* -@@ -693,6 +714,7 @@ static const struct board_info __initcon - &board_96348_D4PW, - &board_spw500v, - &board_96348sv, -+ &board_V2500V_BB, - #endif /* CONFIG_BCM63XX_CPU_6348 */ - #ifdef CONFIG_BCM63XX_CPU_6358 - &board_96358vw, -@@ -733,6 +755,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, }, - { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, }, - { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, }, -+ { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, }, - { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, }, - { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, }, - { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, }, -@@ -794,6 +817,22 @@ void __init board_bcm963xx_init(void) - val &= MPI_CSBASE_BASE_MASK; - } - boot_addr = (u8 *)KSEG1ADDR(val); -+ pr_info("Boot address 0x%08x\n",(unsigned int)boot_addr); -+ -+ /* BT Voyager 2500V (RTA1046VW PCB) has 8 Meg flash used as two */ -+ /* banks of 4 Meg. The byte at 0xBF800000 identifies the back to use.*/ -+ /* Loading firmware from the CFE Prompt always loads to Bank 0 */ -+ /* Do an early check of CFE and then select bank 0 */ -+ -+ if (boot_addr == (u8 *)0xbf800000) { -+ u8 *tmp_boot_addr = (u8*)0xbfc00000; -+ -+ bcm63xx_nvram_init(tmp_boot_addr + BCM963XX_NVRAM_OFFSET); -+ if (!strcmp(bcm63xx_nvram_get_name(), "V2500V_BB")) { -+ pr_info("V2500V: nvram bank 0\n"); -+ boot_addr = tmp_boot_addr; -+ } -+ } - - /* dump cfe version */ - cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET; ---- a/arch/mips/bcm63xx/dev-flash.c -+++ b/arch/mips/bcm63xx/dev-flash.c -@@ -21,6 +21,7 @@ - #include - #include - -+#include - #include - #include - #include -@@ -256,6 +257,13 @@ int __init bcm63xx_flash_register(void) - val = bcm_mpi_readl(MPI_CSBASE_REG(0)); - val &= MPI_CSBASE_BASE_MASK; - -+ /* BT Voyager 2500V has 8 Meg flash in two 4 Meg banks */ -+ /* Loading from CFE always uses Bank 0 */ -+ if (!strcmp(board_get_name(), "V2500V_BB")) { -+ pr_info("V2500V: Start in Bank 0\n"); -+ val = val + 0x400000; // Select Bank 0 start address -+ } -+ - mtd_resources[0].start = val; - mtd_resources[0].end = 0x1FFFFFFF; - } diff --git a/target/linux/bcm63xx/patches-5.4/512-board_BTV2110.patch b/target/linux/bcm63xx/patches-5.4/512-board_BTV2110.patch deleted file mode 100644 index 03246b6378..0000000000 --- a/target/linux/bcm63xx/patches-5.4/512-board_BTV2110.patch +++ /dev/null @@ -1,41 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -206,6 +206,22 @@ static struct board_info __initdata boar - .has_ehci0 = 1, - }; - -+/* BT Voyager 2110 */ -+static struct board_info __initdata board_V2110 = { -+ .name = "V2110", -+ .expected_cpu_id = 0x6348, -+ -+ .has_pci = 1, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+ - static struct board_info __initdata board_96348gw = { - .name = "96348GW", - .expected_cpu_id = 0x6348, -@@ -715,6 +731,7 @@ static const struct board_info __initcon - &board_spw500v, - &board_96348sv, - &board_V2500V_BB, -+ &board_V2110, - #endif /* CONFIG_BCM63XX_CPU_6348 */ - #ifdef CONFIG_BCM63XX_CPU_6358 - &board_96358vw, -@@ -755,6 +772,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, }, - { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, }, - { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, }, -+ { .compatible = "bt,voyager-2110", .data = &board_V2110, }, - { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, }, - { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, }, - { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, }, diff --git a/target/linux/bcm63xx/patches-5.4/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch b/target/linux/bcm63xx/patches-5.4/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch deleted file mode 100644 index 0035cee7e9..0000000000 --- a/target/linux/bcm63xx/patches-5.4/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch +++ /dev/null @@ -1,214 +0,0 @@ -From e796582b499f0ba6acaa1ac3a10c09cceaab7702 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 9 Mar 2014 04:55:52 +0100 -Subject: [PATCH] MIPS: BCM63XX: add inventel Livebox support - ---- - arch/mips/bcm63xx/boards/Kconfig | 6 + - arch/mips/bcm63xx/boards/Makefile | 1 + - arch/mips/bcm63xx/boards/board_common.c | 2 +- - arch/mips/bcm63xx/boards/board_common.h | 6 + - arch/mips/bcm63xx/boards/board_livebox.c | 215 ++++++++++++++++++++++++++++++ - 5 files changed, 229 insertions(+), 1 deletion(-) - create mode 100644 arch/mips/bcm63xx/boards/board_livebox.c - ---- a/arch/mips/bcm63xx/boards/Kconfig -+++ b/arch/mips/bcm63xx/boards/Kconfig -@@ -12,4 +12,10 @@ config BOARD_BCM963XX - select BCMA - default y - -+config BOARD_LIVEBOX -+ bool "Inventel Livebox(es) boards" -+ select SSB -+ help -+ Inventel Livebox boards using the RedBoot bootloader. -+ - endmenu ---- a/arch/mips/bcm63xx/boards/Makefile -+++ b/arch/mips/bcm63xx/boards/Makefile -@@ -1,3 +1,4 @@ - # SPDX-License-Identifier: GPL-2.0-only - obj-y += board_common.o - obj-$(CONFIG_BOARD_BCM963XX) += board_bcm963xx.o -+obj-$(CONFIG_BOARD_LIVEBOX) += board_livebox.o ---- a/arch/mips/bcm63xx/boards/board_common.c -+++ b/arch/mips/bcm63xx/boards/board_common.c -@@ -54,7 +54,7 @@ void __init board_prom_init(void) - if (fw_arg3 == CFE_EPTSEAL) - board_bcm963xx_init(); - else -- panic("unsupported bootloader detected"); -+ board_livebox_init(); - } - - static int (*board_get_mac_address)(u8 mac[ETH_ALEN]); ---- a/arch/mips/bcm63xx/boards/board_common.h -+++ b/arch/mips/bcm63xx/boards/board_common.h -@@ -24,4 +24,10 @@ static inline void board_of_device_prese - } - #endif - -+#if defined(CONFIG_BOARD_LIVEBOX) -+void board_livebox_init(void); -+#else -+static inline void board_livebox_init(void) { } -+#endif -+ - #endif /* __BOARD_COMMON_H */ ---- /dev/null -+++ b/arch/mips/bcm63xx/boards/board_livebox.c -@@ -0,0 +1,153 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2008 Florian Fainelli -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "board_common.h" -+ -+#define PFX "board_livebox: " -+ -+static unsigned int mac_addr_used = 0; -+ -+/* -+ * known 6348 boards -+ */ -+#ifdef CONFIG_BCM63XX_CPU_6348 -+static struct board_info __initdata board_livebox_blue5g = { -+ .name = "Livebox-blue-5g", -+ .expected_cpu_id = 0x6348, -+ -+ .has_pccard = 1, -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .ephy_reset_gpio = 6, -+ .ephy_reset_gpio_flags = GPIO_ACTIVE_LOW, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 31, -+ }, -+}; -+#endif -+ -+/* -+ * all boards -+ */ -+static const struct board_info __initdata *bcm963xx_boards[] = { -+#ifdef CONFIG_BCM63XX_CPU_6348 -+ &board_livebox_blue5g -+#endif /* CONFIG_BCM63XX_CPU_6348 */ -+}; -+ -+static struct of_device_id const livebox_boards_dt[] = { -+ { .compatible = "inventel,livebox-1", .data = &board_livebox_blue5g, }, -+ { } -+}; -+ -+/* -+ * register & return a new board mac address -+ */ -+static int livebox_get_mac_address(u8 *mac) -+{ -+ u8 *p; -+ int count; -+ -+ memcpy(mac, (u8 *)0xBEBFF377, ETH_ALEN); -+ -+ p = mac + ETH_ALEN - 1; -+ count = mac_addr_used; -+ -+ while (count--) { -+ do { -+ (*p)++; -+ if (*p != 0) -+ break; -+ p--; -+ } while (p != mac); -+ } -+ -+ if (p == mac) { -+ printk(KERN_ERR PFX "unable to fetch mac address\n"); -+ return -ENODEV; -+ } -+ mac_addr_used++; -+ -+ return 0; -+} -+ -+/* -+ * early init callback -+ */ -+#define LIVEBOX_GPIO_DETECT_MASK 0x000000ff -+#define LIVEBOX_BOOT_ADDR 0x1e400000 -+ -+#define LIVEBOX_HW_BLUE5G_9 0x90 -+ -+void __init board_livebox_init(void) -+{ -+ u32 val; -+ u8 hw_version; -+ const struct board_info *board; -+ const struct of_device_id *board_match; -+ -+ /* find board by compat */ -+ board_match = bcm63xx_match_board(livebox_boards_dt); -+ if (board_match) { -+ board = board_match->data; -+ } else { -+ /* Get hardware version */ -+ val = bcm_gpio_readl(GPIO_CTL_LO_REG); -+ val &= ~LIVEBOX_GPIO_DETECT_MASK; -+ bcm_gpio_writel(val, GPIO_CTL_LO_REG); -+ -+ hw_version = bcm_gpio_readl(GPIO_DATA_LO_REG); -+ hw_version &= LIVEBOX_GPIO_DETECT_MASK; -+ -+ switch (hw_version) { -+ case LIVEBOX_HW_BLUE5G_9: -+ printk(KERN_INFO PFX "Livebox BLUE5G.9\n"); -+ board = bcm963xx_boards[0]; -+ break; -+ default: -+ printk(KERN_INFO PFX "Unknown livebox version: %02x\n", -+ hw_version); -+ /* use default livebox configuration */ -+ board = bcm963xx_boards[0]; -+ break; -+ } -+ } -+ -+ /* use default livebox configuration */ -+ board_early_setup(board, livebox_get_mac_address); -+ -+ /* read base address of boot chip select (0) */ -+ val = bcm_mpi_readl(MPI_CSBASE_REG(0)); -+ val &= MPI_CSBASE_BASE_MASK; -+ if (val != LIVEBOX_BOOT_ADDR) { -+ printk(KERN_NOTICE PFX "flash address is: 0x%08x, forcing to: 0x%08x\n", -+ val, LIVEBOX_BOOT_ADDR); -+ bcm63xx_flash_force_phys_base_address(LIVEBOX_BOOT_ADDR, 0x1ebfffff); -+ } -+} diff --git a/target/linux/bcm63xx/patches-5.4/514-board_ct536_ct5621.patch b/target/linux/bcm63xx/patches-5.4/514-board_ct536_ct5621.patch deleted file mode 100644 index b653702b49..0000000000 --- a/target/linux/bcm63xx/patches-5.4/514-board_ct536_ct5621.patch +++ /dev/null @@ -1,50 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -222,6 +222,30 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_ct536_ct5621 = { -+ .name = "CT536_CT5621", -+ .expected_cpu_id = 0x6348, -+ -+ .has_pccard = 1, -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM4318, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ }, -+}; -+ - static struct board_info __initdata board_96348gw = { - .name = "96348GW", - .expected_cpu_id = 0x6348, -@@ -732,6 +756,7 @@ static const struct board_info __initcon - &board_96348sv, - &board_V2500V_BB, - &board_V2110, -+ &board_ct536_ct5621, - #endif /* CONFIG_BCM63XX_CPU_6348 */ - #ifdef CONFIG_BCM63XX_CPU_6358 - &board_96358vw, -@@ -774,6 +799,8 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, }, - { .compatible = "bt,voyager-2110", .data = &board_V2110, }, - { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, }, -+ { .compatible = "comtrend,ct-536plus", .data = &board_ct536_ct5621, }, -+ { .compatible = "comtrend,ct-5621", .data = &board_ct536_ct5621, }, - { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, }, - { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, }, - { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, }, diff --git a/target/linux/bcm63xx/patches-5.4/515-board_DWV-S0_fixes.patch b/target/linux/bcm63xx/patches-5.4/515-board_DWV-S0_fixes.patch deleted file mode 100644 index 1460256e8c..0000000000 --- a/target/linux/bcm63xx/patches-5.4/515-board_DWV-S0_fixes.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -613,6 +613,7 @@ static struct board_info __initdata boar - }, - - .has_ohci0 = 1, -+ .has_ehci0 = 1, - }; - - /* D-Link DSL-274xB revison C2/C3 */ diff --git a/target/linux/bcm63xx/patches-5.4/516-board_96348A-122.patch b/target/linux/bcm63xx/patches-5.4/516-board_96348A-122.patch deleted file mode 100644 index fe1a7e2e0c..0000000000 --- a/target/linux/bcm63xx/patches-5.4/516-board_96348A-122.patch +++ /dev/null @@ -1,48 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -246,6 +246,29 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_96348A_122 = { -+ .name = "96348A-122", -+ .expected_cpu_id = 0x6348, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM4318, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ }, -+}; -+ - static struct board_info __initdata board_96348gw = { - .name = "96348GW", - .expected_cpu_id = 0x6348, -@@ -758,6 +781,7 @@ static const struct board_info __initcon - &board_V2500V_BB, - &board_V2110, - &board_ct536_ct5621, -+ &board_96348A_122, - #endif /* CONFIG_BCM63XX_CPU_6348 */ - #ifdef CONFIG_BCM63XX_CPU_6358 - &board_96358vw, -@@ -801,6 +825,7 @@ static struct of_device_id const bcm963x - { .compatible = "bt,voyager-2110", .data = &board_V2110, }, - { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, }, - { .compatible = "comtrend,ct-536plus", .data = &board_ct536_ct5621, }, -+ { .compatible = "comtrend,ct-5365", .data = &board_96348A_122, }, - { .compatible = "comtrend,ct-5621", .data = &board_ct536_ct5621, }, - { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, }, - { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, }, diff --git a/target/linux/bcm63xx/patches-5.4/517_board_CPVA502plus.patch b/target/linux/bcm63xx/patches-5.4/517_board_CPVA502plus.patch deleted file mode 100644 index 980be2952c..0000000000 --- a/target/linux/bcm63xx/patches-5.4/517_board_CPVA502plus.patch +++ /dev/null @@ -1,53 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -222,6 +222,34 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_CPVA502plus = { -+ .name = "CPVA502+", -+ .expected_cpu_id = 0x6348, -+ -+ .has_pci = 1, -+ .ephy_reset_gpio = 4, -+ .ephy_reset_gpio_flags = GPIO_ACTIVE_LOW, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM4318, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ }, -+}; -+ - static struct board_info __initdata board_ct536_ct5621 = { - .name = "CT536_CT5621", - .expected_cpu_id = 0x6348, -@@ -782,6 +810,7 @@ static const struct board_info __initcon - &board_V2110, - &board_ct536_ct5621, - &board_96348A_122, -+ &board_CPVA502plus, - #endif /* CONFIG_BCM63XX_CPU_6348 */ - #ifdef CONFIG_BCM63XX_CPU_6358 - &board_96358vw, -@@ -835,6 +864,7 @@ static struct of_device_id const bcm963x - { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, }, - { .compatible = "tecom,gw6000", .data = &board_gw6000, }, - { .compatible = "tecom,gw6200", .data = &board_gw6200, }, -+ { .compatible = "telsey,cpva502plus", .data = &board_CPVA502plus, }, - { .compatible = "telsey,magic", .data = &board_96348sv, }, - { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, }, - { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, }, diff --git a/target/linux/bcm63xx/patches-5.4/518-bcm63xx-add-support-for-96368MVWG-board.patch b/target/linux/bcm63xx/patches-5.4/518-bcm63xx-add-support-for-96368MVWG-board.patch deleted file mode 100644 index 7aac2a5d71..0000000000 --- a/target/linux/bcm63xx/patches-5.4/518-bcm63xx-add-support-for-96368MVWG-board.patch +++ /dev/null @@ -1,111 +0,0 @@ -From eeacc2529942051504bc957726aa178671344421 Mon Sep 17 00:00:00 2001 -From: Maxime Bizon -Date: Wed, 20 Jan 2010 16:21:30 +0100 -Subject: [PATCH 32/63] bcm63xx: add support for 96368MVWG board. - ---- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 95 ++++++++++++++++++++ - .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h | 2 + - 2 files changed, 97 insertions(+), 0 deletions(-) - ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -774,6 +774,52 @@ static struct board_info __initdata boar - #endif /* CONFIG_BCM63XX_CPU_6358 */ - - /* -+ * known 6368 boards -+ */ -+#ifdef CONFIG_BCM63XX_CPU_6368 -+static struct board_info __initdata board_96368mvwg = { -+ .name = "96368MVWG", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_usbd = 1, -+ .usbd = { -+ .use_fullspeed = 0, -+ .port_no = 0, -+ }, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "port1", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "port2", -+ }, -+ [4] = { -+ .used = 1, -+ .phy_id = 0x12, -+ .name = "port0", -+ }, -+ [5] = { -+ .used = 1, -+ .phy_id = 0x11, -+ .name = "port3", -+ }, -+ }, -+ }, -+}; -+#endif /* CONFIG_BCM63XX_CPU_6368 */ -+ -+/* - * all boards - */ - static const struct board_info __initconst *bcm963xx_boards[] = { -@@ -824,6 +870,9 @@ static const struct board_info __initcon - &board_HW553, - &board_spw303v, - #endif /* CONFIG_BCM63XX_CPU_6358 */ -+#ifdef CONFIG_BCM63XX_CPU_6368 -+ &board_96368mvwg, -+#endif /* CONFIG_BCM63XX_CPU_6368 */ - }; - - static struct of_device_id const bcm963xx_boards_dt[] = { -@@ -888,6 +937,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_6362 - #endif /* CONFIG_BCM63XX_CPU_6362 */ - #ifdef CONFIG_BCM63XX_CPU_6368 -+ { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 - #endif /* CONFIG_BCM63XX_CPU_63268 */ ---- a/arch/mips/bcm63xx/boards/board_common.c -+++ b/arch/mips/bcm63xx/boards/board_common.c -@@ -81,12 +81,25 @@ void __init board_early_setup(const stru - bcm63xx_pci_enabled = 1; - if (BCMCPU_IS_6348()) - val |= GPIO_MODE_6348_G2_PCI; -+ -+ if (BCMCPU_IS_6368()) -+ val |= GPIO_MODE_6368_PCI_REQ1 | -+ GPIO_MODE_6368_PCI_GNT1 | -+ GPIO_MODE_6368_PCI_INTB | -+ GPIO_MODE_6368_PCI_REQ0 | -+ GPIO_MODE_6368_PCI_GNT0; - } - #endif - - if (board.has_pccard) { - if (BCMCPU_IS_6348()) - val |= GPIO_MODE_6348_G1_MII_PCCARD; -+ -+ if (BCMCPU_IS_6368()) -+ val |= GPIO_MODE_6368_PCMCIA_CD1 | -+ GPIO_MODE_6368_PCMCIA_CD2 | -+ GPIO_MODE_6368_PCMCIA_VS1 | -+ GPIO_MODE_6368_PCMCIA_VS2; - } - - if (board.has_enet0 && !board.enet0.use_internal_phy) { diff --git a/target/linux/bcm63xx/patches-5.4/519-bcm63xx-add-support-for-96368MVNgr-board.patch b/target/linux/bcm63xx/patches-5.4/519-bcm63xx-add-support-for-96368MVNgr-board.patch deleted file mode 100644 index f123fa663c..0000000000 --- a/target/linux/bcm63xx/patches-5.4/519-bcm63xx-add-support-for-96368MVNgr-board.patch +++ /dev/null @@ -1,69 +0,0 @@ -From f457fc2eb9bb915b5a4d251c7c68d4694cf07b01 Mon Sep 17 00:00:00 2001 -From: Maxime Bizon -Date: Fri, 4 Nov 2011 12:33:48 +0100 -Subject: [PATCH 33/63] bcm63xx: add support for 96368MVNgr board. - ---- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 67 +++++++++++++++++++++++++++++ - 1 files changed, 67 insertions(+), 0 deletions(-) - ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -817,6 +817,41 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_96368mvngr = { -+ .name = "96368MVNgr", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "port1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "port2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "port3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "port4", -+ }, -+ }, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6368 */ - - /* -@@ -872,6 +907,7 @@ static const struct board_info __initcon - #endif /* CONFIG_BCM63XX_CPU_6358 */ - #ifdef CONFIG_BCM63XX_CPU_6368 - &board_96368mvwg, -+ &board_96368mvngr, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - }; - -@@ -937,6 +973,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_6362 - #endif /* CONFIG_BCM63XX_CPU_6362 */ - #ifdef CONFIG_BCM63XX_CPU_6368 -+ { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, }, - { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 diff --git a/target/linux/bcm63xx/patches-5.4/520-MIPS-BCM63XX-add-96328avng-reference-board.patch b/target/linux/bcm63xx/patches-5.4/520-MIPS-BCM63XX-add-96328avng-reference-board.patch deleted file mode 100644 index 6c2c5aa2c9..0000000000 --- a/target/linux/bcm63xx/patches-5.4/520-MIPS-BCM63XX-add-96328avng-reference-board.patch +++ /dev/null @@ -1,44 +0,0 @@ -From c93c2bbf0cc96da5a47d77f01daf6c983cfe4216 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Tue, 29 May 2012 10:52:25 +0200 -Subject: [PATCH] MIPS: BCM63XX: add 96328avng reference board - ---- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 77 +++++++++++++++++++++++++++++ - 1 files changed, 77 insertions(+), 0 deletions(-) - ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -64,6 +64,32 @@ static struct board_info __initdata boar - .use_fullspeed = 0, - .port_no = 0, - }, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, - }; - #endif /* CONFIG_BCM63XX_CPU_6328 */ - diff --git a/target/linux/bcm63xx/patches-5.4/521-MIPS-BCM63XX-add-963281TAN-reference-board.patch b/target/linux/bcm63xx/patches-5.4/521-MIPS-BCM63XX-add-963281TAN-reference-board.patch deleted file mode 100644 index cdcc1c0aa7..0000000000 --- a/target/linux/bcm63xx/patches-5.4/521-MIPS-BCM63XX-add-963281TAN-reference-board.patch +++ /dev/null @@ -1,67 +0,0 @@ -From f0649f7b7c672cf452a1796a1422bf615e1973f8 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Tue, 29 May 2012 11:01:12 +0200 -Subject: [PATCH] MIPS: BCM63XX: add 963281TAN reference board - ---- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 71 +++++++++++++++++++++++++++++ - 1 files changed, 71 insertions(+), 0 deletions(-) - ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -91,6 +91,39 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_963281TAN = { -+ .name = "963281TAN", -+ .expected_cpu_id = 0x6328, -+ -+ .has_pci = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6328 */ - - /* -@@ -889,6 +922,7 @@ static const struct board_info __initcon - #endif /* CONFIG_BCM63XX_CPU_3368 */ - #ifdef CONFIG_BCM63XX_CPU_6328 - &board_96328avng, -+ &board_963281TAN, - #endif /* CONFIG_BCM63XX_CPU_6328 */ - #ifdef CONFIG_BCM63XX_CPU_6338 - &board_96338gw, -@@ -945,6 +979,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_6318 - #endif /* CONFIG_BCM63XX_CPU_6318 */ - #ifdef CONFIG_BCM63XX_CPU_6328 -+ { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, }, - { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, - #endif /* CONFIG_BCM63XX_CPU_6328 */ - #ifdef CONFIG_BCM63XX_CPU_6338 diff --git a/target/linux/bcm63xx/patches-5.4/521-MIPS-BCM63XX-add-96328avng-reference-board.patch b/target/linux/bcm63xx/patches-5.4/521-MIPS-BCM63XX-add-96328avng-reference-board.patch new file mode 100644 index 0000000000..43ad569e1e --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/521-MIPS-BCM63XX-add-96328avng-reference-board.patch @@ -0,0 +1,44 @@ +From c93c2bbf0cc96da5a47d77f01daf6c983cfe4216 Mon Sep 17 00:00:00 2001 +From: Jonas Gorski +Date: Tue, 29 May 2012 10:52:25 +0200 +Subject: [PATCH] MIPS: BCM63XX: add 96328avng reference board + +--- + arch/mips/bcm63xx/boards/board_bcm963xx.c | 77 +++++++++++++++++++++++++++++ + 1 files changed, 77 insertions(+), 0 deletions(-) + +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -321,6 +321,32 @@ static struct board_info __initdata boar + .use_fullspeed = 0, + .port_no = 0, + }, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 4", ++ }, ++ }, ++ }, + }; + #endif /* CONFIG_BCM63XX_CPU_6328 */ + diff --git a/target/linux/bcm63xx/patches-5.4/522-MIPS-BCM63XX-add-963281TAN-reference-board.patch b/target/linux/bcm63xx/patches-5.4/522-MIPS-BCM63XX-add-963281TAN-reference-board.patch new file mode 100644 index 0000000000..a6f4a84336 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/522-MIPS-BCM63XX-add-963281TAN-reference-board.patch @@ -0,0 +1,67 @@ +From f0649f7b7c672cf452a1796a1422bf615e1973f8 Mon Sep 17 00:00:00 2001 +From: Jonas Gorski +Date: Tue, 29 May 2012 11:01:12 +0200 +Subject: [PATCH] MIPS: BCM63XX: add 963281TAN reference board + +--- + arch/mips/bcm63xx/boards/board_bcm963xx.c | 71 +++++++++++++++++++++++++++++ + 1 files changed, 71 insertions(+), 0 deletions(-) + +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -348,6 +348,39 @@ static struct board_info __initdata boar + }, + }, + }; ++ ++static struct board_info __initdata board_963281TAN = { ++ .name = "963281TAN", ++ .expected_cpu_id = 0x6328, ++ ++ .has_pci = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 4", ++ }, ++ }, ++ }, ++}; + #endif /* CONFIG_BCM63XX_CPU_6328 */ + + /* +@@ -702,6 +735,7 @@ static const struct board_info __initcon + #endif /* CONFIG_BCM63XX_CPU_6318 */ + #ifdef CONFIG_BCM63XX_CPU_6328 + &board_96328avng, ++ &board_963281TAN, + #endif /* CONFIG_BCM63XX_CPU_6328 */ + #ifdef CONFIG_BCM63XX_CPU_6338 + &board_96338gw, +@@ -741,6 +775,7 @@ static struct of_device_id const bcm963x + { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, }, + #endif /* CONFIG_BCM63XX_CPU_6318 */ + #ifdef CONFIG_BCM63XX_CPU_6328 ++ { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, }, + { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, + #endif /* CONFIG_BCM63XX_CPU_6328 */ + #ifdef CONFIG_BCM63XX_CPU_6338 diff --git a/target/linux/bcm63xx/patches-5.4/522-board_dsl_274xb_rev_f.patch b/target/linux/bcm63xx/patches-5.4/522-board_dsl_274xb_rev_f.patch deleted file mode 100644 index 25362e3123..0000000000 --- a/target/linux/bcm63xx/patches-5.4/522-board_dsl_274xb_rev_f.patch +++ /dev/null @@ -1,79 +0,0 @@ -From 66808f706b3dcd83a9f5157997ff478a880a2906 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Mon, 30 Apr 2012 09:10:51 +0200 -Subject: [PATCH 70/79] MIPS: BCM63XX: Add board definition for D-Link - DSL-274xB rev F1 - ---- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 104 +++++++++++++++++++++++++++++ - 1 files changed, 104 insertions(+), 0 deletions(-) - ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -124,6 +124,50 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_dsl_274xb_f1 = { -+ .name = "AW4339U", -+ .expected_cpu_id = 0x6328, -+ -+ .has_pci = 1, -+ -+ .has_caldata = 1, -+ .caldata = { -+ { -+ .vendor = PCI_VENDOR_ID_ATHEROS, -+ .caldata_offset = 0x7d1000, -+ .slot = 0, -+ .led_pin = -1, -+ .led_active_high = 1, -+ }, -+ }, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 4", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 3", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 2", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 1", -+ }, -+ }, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6328 */ - - /* -@@ -923,6 +967,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6328 - &board_96328avng, - &board_963281TAN, -+ &board_dsl_274xb_f1, - #endif /* CONFIG_BCM63XX_CPU_6328 */ - #ifdef CONFIG_BCM63XX_CPU_6338 - &board_96338gw, -@@ -981,6 +1026,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_6328 - { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, }, - { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, -+ { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, }, - #endif /* CONFIG_BCM63XX_CPU_6328 */ - #ifdef CONFIG_BCM63XX_CPU_6338 - { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, }, diff --git a/target/linux/bcm63xx/patches-5.4/523-board_96348w3.patch b/target/linux/bcm63xx/patches-5.4/523-board_96348w3.patch deleted file mode 100644 index 6e61744189..0000000000 --- a/target/linux/bcm63xx/patches-5.4/523-board_96348w3.patch +++ /dev/null @@ -1,42 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -555,6 +555,23 @@ static struct board_info __initdata boar - .has_ohci0 = 1, - }; - -+/* NetGear DG834G v4 */ -+static struct board_info __initdata board_96348W3 = { -+ .name = "96348W3", -+ .expected_cpu_id = 0x6348, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+ - static struct board_info __initdata board_96348_D4PW = { - .name = "D-4P-W", - .expected_cpu_id = 0x6348, -@@ -997,6 +1014,7 @@ static const struct board_info __initcon - &board_ct536_ct5621, - &board_96348A_122, - &board_CPVA502plus, -+ &board_96348W3, - #endif /* CONFIG_BCM63XX_CPU_6348 */ - #ifdef CONFIG_BCM63XX_CPU_6358 - &board_96358vw, -@@ -1052,6 +1070,7 @@ static struct of_device_id const bcm963x - { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, }, - { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, }, - { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, }, -+ { .compatible = "netgear,dg834g-v4", .data = &board_96348W3, }, - { .compatible = "sagem,fast-2404", .data = &board_FAST2404, }, - { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, }, - { .compatible = "tecom,gw6000", .data = &board_gw6000, }, diff --git a/target/linux/bcm63xx/patches-5.4/523-board_bcm6328-d-link-dsl-274xb-f.patch b/target/linux/bcm63xx/patches-5.4/523-board_bcm6328-d-link-dsl-274xb-f.patch new file mode 100644 index 0000000000..97f71e115a --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/523-board_bcm6328-d-link-dsl-274xb-f.patch @@ -0,0 +1,79 @@ +From 66808f706b3dcd83a9f5157997ff478a880a2906 Mon Sep 17 00:00:00 2001 +From: Jonas Gorski +Date: Mon, 30 Apr 2012 09:10:51 +0200 +Subject: [PATCH 70/79] MIPS: BCM63XX: Add board definition for D-Link + DSL-274xB rev F1 + +--- + arch/mips/bcm63xx/boards/board_bcm963xx.c | 104 +++++++++++++++++++++++++++++ + 1 files changed, 104 insertions(+), 0 deletions(-) + +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -381,6 +381,50 @@ static struct board_info __initdata boar + }, + }, + }; ++ ++static struct board_info __initdata board_dsl_274xb_f1 = { ++ .name = "AW4339U", ++ .expected_cpu_id = 0x6328, ++ ++ .has_pci = 1, ++ ++ .has_caldata = 1, ++ .caldata = { ++ { ++ .vendor = PCI_VENDOR_ID_ATHEROS, ++ .caldata_offset = 0x7d1000, ++ .slot = 0, ++ .led_pin = -1, ++ .led_active_high = 1, ++ }, ++ }, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 4", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 3", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 2", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 1", ++ }, ++ }, ++ }, ++}; + #endif /* CONFIG_BCM63XX_CPU_6328 */ + + /* +@@ -736,6 +780,7 @@ static const struct board_info __initcon + #ifdef CONFIG_BCM63XX_CPU_6328 + &board_96328avng, + &board_963281TAN, ++ &board_dsl_274xb_f1, + #endif /* CONFIG_BCM63XX_CPU_6328 */ + #ifdef CONFIG_BCM63XX_CPU_6338 + &board_96338gw, +@@ -777,6 +822,7 @@ static struct of_device_id const bcm963x + #ifdef CONFIG_BCM63XX_CPU_6328 + { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, }, + { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, ++ { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, }, + #endif /* CONFIG_BCM63XX_CPU_6328 */ + #ifdef CONFIG_BCM63XX_CPU_6338 + { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, }, diff --git a/target/linux/bcm63xx/patches-5.4/524-board_CT6373-1.patch b/target/linux/bcm63xx/patches-5.4/524-board_CT6373-1.patch deleted file mode 100644 index 4a6280dcab..0000000000 --- a/target/linux/bcm63xx/patches-5.4/524-board_CT6373-1.patch +++ /dev/null @@ -1,49 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -853,6 +853,30 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_ct6373_1 = { -+ .name = "CT6373-1", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM4318, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ }, -+}; -+ - static struct board_info __initdata board_HW553 = { - .name = "HW553", - .expected_cpu_id = 0x6358, -@@ -1025,6 +1049,7 @@ static const struct board_info __initcon - &board_dsl_274xb_rev_c, - &board_nb4_ser_r0, - &board_nb4_fxc_r1, -+ &board_ct6373_1, - &board_HW553, - &board_spw303v, - #endif /* CONFIG_BCM63XX_CPU_6358 */ -@@ -1084,6 +1109,7 @@ static struct of_device_id const bcm963x - { .compatible = "alcatel,rg100a", .data = &board_96358vw2, }, - { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, }, - { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, }, -+ { .compatible = "comtrend,ct-6373", .data = &board_ct6373_1, }, - { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, }, - { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, }, - { .compatible = "huawei,echolife-hg553", .data = &board_HW553, }, diff --git a/target/linux/bcm63xx/patches-5.4/524-board_bcm6328-adb-a4001n1.patch b/target/linux/bcm63xx/patches-5.4/524-board_bcm6328-adb-a4001n1.patch new file mode 100644 index 0000000000..065f2df164 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/524-board_bcm6328-adb-a4001n1.patch @@ -0,0 +1,68 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -382,6 +382,49 @@ static struct board_info __initdata boar + }, + }; + ++static struct board_info __initdata board_A4001N1 = { ++ .name = "963281T_TEF", ++ .expected_cpu_id = 0x6328, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 4", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM43225, ++ .pci_bus = 1, ++ .pci_dev = 0, ++ }, ++}; ++ + static struct board_info __initdata board_dsl_274xb_f1 = { + .name = "AW4339U", + .expected_cpu_id = 0x6328, +@@ -780,6 +823,7 @@ static const struct board_info __initcon + #ifdef CONFIG_BCM63XX_CPU_6328 + &board_96328avng, + &board_963281TAN, ++ &board_A4001N1, + &board_dsl_274xb_f1, + #endif /* CONFIG_BCM63XX_CPU_6328 */ + #ifdef CONFIG_BCM63XX_CPU_6338 +@@ -820,6 +864,7 @@ static struct of_device_id const bcm963x + { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, }, + #endif /* CONFIG_BCM63XX_CPU_6318 */ + #ifdef CONFIG_BCM63XX_CPU_6328 ++ { .compatible = "adb,a4001n1", .data = &board_A4001N1, }, + { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, }, + { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, + { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, }, diff --git a/target/linux/bcm63xx/patches-5.4/525-board_bcm6328-comtrend-ar-5387un.patch b/target/linux/bcm63xx/patches-5.4/525-board_bcm6328-comtrend-ar-5387un.patch new file mode 100644 index 0000000000..99a026f9d5 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/525-board_bcm6328-comtrend-ar-5387un.patch @@ -0,0 +1,97 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -349,6 +349,78 @@ static struct board_info __initdata boar + }, + }; + ++static struct sprom_fixup __initdata ar5387un_fixups[] = { ++ { .offset = 2, .value = 0x05bb }, ++ { .offset = 65, .value = 0x1204 }, ++ { .offset = 78, .value = 0x0303 }, ++ { .offset = 79, .value = 0x0202 }, ++ { .offset = 80, .value = 0xff02 }, ++ { .offset = 87, .value = 0x0315 }, ++ { .offset = 88, .value = 0x0315 }, ++ { .offset = 96, .value = 0x2048 }, ++ { .offset = 97, .value = 0xff11 }, ++ { .offset = 98, .value = 0x1567 }, ++ { .offset = 99, .value = 0xfb24 }, ++ { .offset = 100, .value = 0x3e3c }, ++ { .offset = 101, .value = 0x4038 }, ++ { .offset = 102, .value = 0xfe7f }, ++ { .offset = 103, .value = 0x1279 }, ++ { .offset = 112, .value = 0x2048 }, ++ { .offset = 113, .value = 0xff03 }, ++ { .offset = 114, .value = 0x154c }, ++ { .offset = 115, .value = 0xfb27 }, ++ { .offset = 116, .value = 0x3e3c }, ++ { .offset = 117, .value = 0x4038 }, ++ { .offset = 118, .value = 0xfe87 }, ++ { .offset = 119, .value = 0x1233 }, ++ { .offset = 203, .value = 0x2226 }, ++}; ++ ++static struct board_info __initdata board_AR5387un = { ++ .name = "96328A-1441N1", ++ .expected_cpu_id = 0x6328, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 4", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM43225, ++ .pci_bus = 1, ++ .pci_dev = 0, ++ .board_fixups = ar5387un_fixups, ++ .num_board_fixups = ARRAY_SIZE(ar5387un_fixups), ++ }, ++}; ++ + static struct board_info __initdata board_963281TAN = { + .name = "963281TAN", + .expected_cpu_id = 0x6328, +@@ -822,6 +894,7 @@ static const struct board_info __initcon + #endif /* CONFIG_BCM63XX_CPU_6318 */ + #ifdef CONFIG_BCM63XX_CPU_6328 + &board_96328avng, ++ &board_AR5387un, + &board_963281TAN, + &board_A4001N1, + &board_dsl_274xb_f1, +@@ -867,6 +940,7 @@ static struct of_device_id const bcm963x + { .compatible = "adb,a4001n1", .data = &board_A4001N1, }, + { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, }, + { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, ++ { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, }, + { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, }, + #endif /* CONFIG_BCM63XX_CPU_6328 */ + #ifdef CONFIG_BCM63XX_CPU_6338 diff --git a/target/linux/bcm63xx/patches-5.4/525-board_dva-g3810bn-tl-1.patch b/target/linux/bcm63xx/patches-5.4/525-board_dva-g3810bn-tl-1.patch deleted file mode 100644 index afa9cf2002..0000000000 --- a/target/linux/bcm63xx/patches-5.4/525-board_dva-g3810bn-tl-1.patch +++ /dev/null @@ -1,50 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -915,6 +915,31 @@ static struct board_info __initdata boar - .use_internal_phy = 1, - }, - }; -+ -+/* D-Link DVA-G3810BN/TL */ -+static struct board_info __initdata board_DVAG3810BN = { -+ .name = "DVAG3810BN", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pccard = 1, -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6358 */ - - /* -@@ -1052,6 +1077,7 @@ static const struct board_info __initcon - &board_ct6373_1, - &board_HW553, - &board_spw303v, -+ &board_DVAG3810BN, - #endif /* CONFIG_BCM63XX_CPU_6358 */ - #ifdef CONFIG_BCM63XX_CPU_6368 - &board_96368mvwg, -@@ -1112,6 +1138,7 @@ static struct of_device_id const bcm963x - { .compatible = "comtrend,ct-6373", .data = &board_ct6373_1, }, - { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, }, - { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, }, -+ { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, }, - { .compatible = "huawei,echolife-hg553", .data = &board_HW553, }, - { .compatible = "pirelli,a226g", .data = &board_DWVS0, }, - { .compatible = "pirelli,a226m", .data = &board_DWVS0, }, diff --git a/target/linux/bcm63xx/patches-5.4/526-board_bcm6328-comtrend-ar-5381u.patch b/target/linux/bcm63xx/patches-5.4/526-board_bcm6328-comtrend-ar-5381u.patch new file mode 100644 index 0000000000..8ed555490b --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/526-board_bcm6328-comtrend-ar-5381u.patch @@ -0,0 +1,79 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -349,6 +349,60 @@ static struct board_info __initdata boar + }, + }; + ++static struct sprom_fixup __initdata ar5381u_fixups[] = { ++ { .offset = 97, .value = 0xfee5 }, ++ { .offset = 98, .value = 0x157c }, ++ { .offset = 99, .value = 0xfae7 }, ++ { .offset = 113, .value = 0xfefa }, ++ { .offset = 114, .value = 0x15d6 }, ++ { .offset = 115, .value = 0xfaf8 }, ++}; ++ ++static struct board_info __initdata board_AR5381u = { ++ .name = "96328A-1241N", ++ .expected_cpu_id = 0x6328, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 4", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM43225, ++ .pci_bus = 1, ++ .pci_dev = 0, ++ .board_fixups = ar5381u_fixups, ++ .num_board_fixups = ARRAY_SIZE(ar5381u_fixups), ++ }, ++}; ++ + static struct sprom_fixup __initdata ar5387un_fixups[] = { + { .offset = 2, .value = 0x05bb }, + { .offset = 65, .value = 0x1204 }, +@@ -894,6 +948,7 @@ static const struct board_info __initcon + #endif /* CONFIG_BCM63XX_CPU_6318 */ + #ifdef CONFIG_BCM63XX_CPU_6328 + &board_96328avng, ++ &board_AR5381u, + &board_AR5387un, + &board_963281TAN, + &board_A4001N1, +@@ -940,6 +995,7 @@ static struct of_device_id const bcm963x + { .compatible = "adb,a4001n1", .data = &board_A4001N1, }, + { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, }, + { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, ++ { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, }, + { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, }, + { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, }, + #endif /* CONFIG_BCM63XX_CPU_6328 */ diff --git a/target/linux/bcm63xx/patches-5.4/526-board_nb6.patch b/target/linux/bcm63xx/patches-5.4/526-board_nb6.patch deleted file mode 100644 index ed0115470a..0000000000 --- a/target/linux/bcm63xx/patches-5.4/526-board_nb6.patch +++ /dev/null @@ -1,52 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -942,6 +942,31 @@ static struct board_info __initdata boar - }; - #endif /* CONFIG_BCM63XX_CPU_6358 */ - -+#ifdef CONFIG_BCM63XX_CPU_6362 -+static struct board_info __initdata board_nb6 = { -+ .name = "NB6", -+ .expected_cpu_id = 0x6362, -+ -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [4] = { -+ .used = 1, -+ .phy_id = 0xff, -+ .bypass_link = 1, -+ .force_speed = 1000, -+ .force_duplex_full = 1, -+ .name = "RGMII", -+ }, -+ }, -+ }, -+}; -+#endif /* CONFIG_BCM63XX_CPU_6362 */ -+ - /* - * known 6368 boards - */ -@@ -1079,6 +1104,9 @@ static const struct board_info __initcon - &board_spw303v, - &board_DVAG3810BN, - #endif /* CONFIG_BCM63XX_CPU_6358 */ -+#ifdef CONFIG_BCM63XX_CPU_6362 -+ &board_nb6, -+#endif /* CONFIG_BCM63XX_CPU_6362 */ - #ifdef CONFIG_BCM63XX_CPU_6368 - &board_96368mvwg, - &board_96368mvngr, -@@ -1150,6 +1178,7 @@ static struct of_device_id const bcm963x - { .compatible = "telsey,cpva642", .data = &board_CPVA642, }, - #endif /* CONFIG_BCM63XX_CPU_6358 */ - #ifdef CONFIG_BCM63XX_CPU_6362 -+ { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, }, - #endif /* CONFIG_BCM63XX_CPU_6362 */ - #ifdef CONFIG_BCM63XX_CPU_6368 - { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, }, diff --git a/target/linux/bcm63xx/patches-5.4/527-board_bcm6328-sagem-fast-2704-v2.patch b/target/linux/bcm63xx/patches-5.4/527-board_bcm6328-sagem-fast-2704-v2.patch new file mode 100644 index 0000000000..4828c8e50c --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/527-board_bcm6328-sagem-fast-2704-v2.patch @@ -0,0 +1,73 @@ +From: Marcin Jurkowski +Date: Thu, 31 Oct 2013 22:33:10 +0000 +Subject: [PATCH] bcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL + router + +This adds kernel support support for Sagemcom F@st 2704 wireless ADSL +router. +It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+ +modem equipped with 64 MiB RAM and 8 MiB flash. + +Signed-off-by: Marcin Jurkowski +--- +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -594,6 +594,42 @@ static struct board_info __initdata boar + }, + }, + }; ++ ++static struct board_info __initdata board_FAST2704V2 = { ++ .name = "F@ST2704V2", ++ .expected_cpu_id = 0x6328, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .has_usbd = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 4", ++ }, ++ }, ++ }, ++}; + #endif /* CONFIG_BCM63XX_CPU_6328 */ + + /* +@@ -953,6 +989,7 @@ static const struct board_info __initcon + &board_963281TAN, + &board_A4001N1, + &board_dsl_274xb_f1, ++ &board_FAST2704V2, + #endif /* CONFIG_BCM63XX_CPU_6328 */ + #ifdef CONFIG_BCM63XX_CPU_6338 + &board_96338gw, +@@ -998,6 +1035,7 @@ static struct of_device_id const bcm963x + { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, }, + { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, }, + { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, }, ++ { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, }, + #endif /* CONFIG_BCM63XX_CPU_6328 */ + #ifdef CONFIG_BCM63XX_CPU_6338 + { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, }, diff --git a/target/linux/bcm63xx/patches-5.4/527-board_fast2604.patch b/target/linux/bcm63xx/patches-5.4/527-board_fast2604.patch deleted file mode 100644 index 733d745def..0000000000 --- a/target/linux/bcm63xx/patches-5.4/527-board_fast2604.patch +++ /dev/null @@ -1,41 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -489,6 +489,22 @@ static struct board_info __initdata boar - .has_ehci0 = 1, - }; - -+static struct board_info __initdata board_FAST2604 = { -+ .name = "F@ST2604", -+ .expected_cpu_id = 0x6348, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+ - static struct board_info __initdata board_rta1025w_16 = { - .name = "RTA1025W_16", - .expected_cpu_id = 0x6348, -@@ -1077,6 +1093,7 @@ static const struct board_info __initcon - &board_96348gw_10, - &board_96348gw_11, - &board_FAST2404, -+ &board_FAST2604, - &board_DV201AMR, - &board_96348gw_a, - &board_rta1025w_16, -@@ -1151,6 +1168,7 @@ static struct of_device_id const bcm963x - { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, }, - { .compatible = "netgear,dg834g-v4", .data = &board_96348W3, }, - { .compatible = "sagem,fast-2404", .data = &board_FAST2404, }, -+ { .compatible = "sagem,fast-2604", .data = &board_FAST2604, }, - { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, }, - { .compatible = "tecom,gw6000", .data = &board_gw6000, }, - { .compatible = "tecom,gw6200", .data = &board_gw6200, }, diff --git a/target/linux/bcm63xx/patches-5.4/528-board_A4001N1.patch b/target/linux/bcm63xx/patches-5.4/528-board_A4001N1.patch deleted file mode 100644 index 209fbde002..0000000000 --- a/target/linux/bcm63xx/patches-5.4/528-board_A4001N1.patch +++ /dev/null @@ -1,68 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -125,6 +125,49 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_A4001N1 = { -+ .name = "963281T_TEF", -+ .expected_cpu_id = 0x6328, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM43225, -+ .pci_bus = 1, -+ .pci_dev = 0, -+ }, -+}; -+ - static struct board_info __initdata board_dsl_274xb_f1 = { - .name = "AW4339U", - .expected_cpu_id = 0x6328, -@@ -1074,6 +1117,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6328 - &board_96328avng, - &board_963281TAN, -+ &board_A4001N1, - &board_dsl_274xb_f1, - #endif /* CONFIG_BCM63XX_CPU_6328 */ - #ifdef CONFIG_BCM63XX_CPU_6338 -@@ -1138,6 +1182,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_6318 - #endif /* CONFIG_BCM63XX_CPU_6318 */ - #ifdef CONFIG_BCM63XX_CPU_6328 -+ { .compatible = "adb,a4001n1", .data = &board_A4001N1, }, - { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, }, - { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, - { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, }, diff --git a/target/linux/bcm63xx/patches-5.4/528-board_bcm6328-adb-a4001n.patch b/target/linux/bcm63xx/patches-5.4/528-board_bcm6328-adb-a4001n.patch new file mode 100644 index 0000000000..da2200652e --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/528-board_bcm6328-adb-a4001n.patch @@ -0,0 +1,68 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -508,6 +508,49 @@ static struct board_info __initdata boar + }, + }; + ++static struct board_info __initdata board_A4001N = { ++ .name = "96328dg2x2", ++ .expected_cpu_id = 0x6328, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 4", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM43225, ++ .pci_bus = 1, ++ .pci_dev = 0, ++ }, ++}; ++ + static struct board_info __initdata board_A4001N1 = { + .name = "963281T_TEF", + .expected_cpu_id = 0x6328, +@@ -987,6 +1030,7 @@ static const struct board_info __initcon + &board_AR5381u, + &board_AR5387un, + &board_963281TAN, ++ &board_A4001N, + &board_A4001N1, + &board_dsl_274xb_f1, + &board_FAST2704V2, +@@ -1029,6 +1073,7 @@ static struct of_device_id const bcm963x + { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, }, + #endif /* CONFIG_BCM63XX_CPU_6318 */ + #ifdef CONFIG_BCM63XX_CPU_6328 ++ { .compatible = "adb,a4001n", .data = &board_A4001N, }, + { .compatible = "adb,a4001n1", .data = &board_A4001N1, }, + { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, }, + { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, diff --git a/target/linux/bcm63xx/patches-5.4/529-board_AR-5387un.patch b/target/linux/bcm63xx/patches-5.4/529-board_AR-5387un.patch deleted file mode 100644 index d5d93eeb1f..0000000000 --- a/target/linux/bcm63xx/patches-5.4/529-board_AR-5387un.patch +++ /dev/null @@ -1,97 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -92,6 +92,78 @@ static struct board_info __initdata boar - }, - }; - -+static struct sprom_fixup __initdata ar5387un_fixups[] = { -+ { .offset = 2, .value = 0x05bb }, -+ { .offset = 65, .value = 0x1204 }, -+ { .offset = 78, .value = 0x0303 }, -+ { .offset = 79, .value = 0x0202 }, -+ { .offset = 80, .value = 0xff02 }, -+ { .offset = 87, .value = 0x0315 }, -+ { .offset = 88, .value = 0x0315 }, -+ { .offset = 96, .value = 0x2048 }, -+ { .offset = 97, .value = 0xff11 }, -+ { .offset = 98, .value = 0x1567 }, -+ { .offset = 99, .value = 0xfb24 }, -+ { .offset = 100, .value = 0x3e3c }, -+ { .offset = 101, .value = 0x4038 }, -+ { .offset = 102, .value = 0xfe7f }, -+ { .offset = 103, .value = 0x1279 }, -+ { .offset = 112, .value = 0x2048 }, -+ { .offset = 113, .value = 0xff03 }, -+ { .offset = 114, .value = 0x154c }, -+ { .offset = 115, .value = 0xfb27 }, -+ { .offset = 116, .value = 0x3e3c }, -+ { .offset = 117, .value = 0x4038 }, -+ { .offset = 118, .value = 0xfe87 }, -+ { .offset = 119, .value = 0x1233 }, -+ { .offset = 203, .value = 0x2226 }, -+}; -+ -+static struct board_info __initdata board_AR5387un = { -+ .name = "96328A-1441N1", -+ .expected_cpu_id = 0x6328, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM43225, -+ .pci_bus = 1, -+ .pci_dev = 0, -+ .board_fixups = ar5387un_fixups, -+ .num_board_fixups = ARRAY_SIZE(ar5387un_fixups), -+ }, -+}; -+ - static struct board_info __initdata board_963281TAN = { - .name = "963281TAN", - .expected_cpu_id = 0x6328, -@@ -1116,6 +1188,7 @@ static const struct board_info __initcon - #endif /* CONFIG_BCM63XX_CPU_3368 */ - #ifdef CONFIG_BCM63XX_CPU_6328 - &board_96328avng, -+ &board_AR5387un, - &board_963281TAN, - &board_A4001N1, - &board_dsl_274xb_f1, -@@ -1185,6 +1258,7 @@ static struct of_device_id const bcm963x - { .compatible = "adb,a4001n1", .data = &board_A4001N1, }, - { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, }, - { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, -+ { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, }, - { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, }, - #endif /* CONFIG_BCM63XX_CPU_6328 */ - #ifdef CONFIG_BCM63XX_CPU_6338 diff --git a/target/linux/bcm63xx/patches-5.4/529-board_bcm6328-nucom-r5010un-v2.patch b/target/linux/bcm63xx/patches-5.4/529-board_bcm6328-nucom-r5010un-v2.patch new file mode 100644 index 0000000000..4f63f23cda --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/529-board_bcm6328-nucom-r5010un-v2.patch @@ -0,0 +1,69 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -673,6 +673,50 @@ static struct board_info __initdata boar + }, + }, + }; ++ ++static struct board_info __initdata board_R5010UNV2 = { ++ .name = "96328ang", ++ .expected_cpu_id = 0x6328, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 4", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM43217, ++ .pci_bus = 1, ++ .pci_dev = 0, ++ }, ++}; ++ + #endif /* CONFIG_BCM63XX_CPU_6328 */ + + /* +@@ -1034,6 +1078,7 @@ static const struct board_info __initcon + &board_A4001N1, + &board_dsl_274xb_f1, + &board_FAST2704V2, ++ &board_R5010UNV2, + #endif /* CONFIG_BCM63XX_CPU_6328 */ + #ifdef CONFIG_BCM63XX_CPU_6338 + &board_96338gw, +@@ -1080,6 +1125,7 @@ static struct of_device_id const bcm963x + { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, }, + { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, }, + { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, }, ++ { .compatible = "nucom,r5010un-v2", .data = &board_R5010UNV2, }, + { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, }, + #endif /* CONFIG_BCM63XX_CPU_6328 */ + #ifdef CONFIG_BCM63XX_CPU_6338 diff --git a/target/linux/bcm63xx/patches-5.4/530-board_AR-5381u.patch b/target/linux/bcm63xx/patches-5.4/530-board_AR-5381u.patch deleted file mode 100644 index 9f4facadbc..0000000000 --- a/target/linux/bcm63xx/patches-5.4/530-board_AR-5381u.patch +++ /dev/null @@ -1,79 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -92,6 +92,60 @@ static struct board_info __initdata boar - }, - }; - -+static struct sprom_fixup __initdata ar5381u_fixups[] = { -+ { .offset = 97, .value = 0xfee5 }, -+ { .offset = 98, .value = 0x157c }, -+ { .offset = 99, .value = 0xfae7 }, -+ { .offset = 113, .value = 0xfefa }, -+ { .offset = 114, .value = 0x15d6 }, -+ { .offset = 115, .value = 0xfaf8 }, -+}; -+ -+static struct board_info __initdata board_AR5381u = { -+ .name = "96328A-1241N", -+ .expected_cpu_id = 0x6328, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM43225, -+ .pci_bus = 1, -+ .pci_dev = 0, -+ .board_fixups = ar5381u_fixups, -+ .num_board_fixups = ARRAY_SIZE(ar5381u_fixups), -+ }, -+}; -+ - static struct sprom_fixup __initdata ar5387un_fixups[] = { - { .offset = 2, .value = 0x05bb }, - { .offset = 65, .value = 0x1204 }, -@@ -1188,6 +1242,7 @@ static const struct board_info __initcon - #endif /* CONFIG_BCM63XX_CPU_3368 */ - #ifdef CONFIG_BCM63XX_CPU_6328 - &board_96328avng, -+ &board_AR5381u, - &board_AR5387un, - &board_963281TAN, - &board_A4001N1, -@@ -1258,6 +1313,7 @@ static struct of_device_id const bcm963x - { .compatible = "adb,a4001n1", .data = &board_A4001N1, }, - { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, }, - { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, -+ { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, }, - { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, }, - { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, }, - #endif /* CONFIG_BCM63XX_CPU_6328 */ diff --git a/target/linux/bcm63xx/patches-5.4/530-board_bcm6328-sercomm-ad1018.patch b/target/linux/bcm63xx/patches-5.4/530-board_bcm6328-sercomm-ad1018.patch new file mode 100644 index 0000000000..409f3d8e26 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/530-board_bcm6328-sercomm-ad1018.patch @@ -0,0 +1,91 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -349,6 +349,71 @@ static struct board_info __initdata boar + }, + }; + ++static struct sprom_fixup __initdata ad1018_fixups[] = { ++ { .offset = 6, .value = 0x1c00 }, ++ { .offset = 65, .value = 0x1256 }, ++ { .offset = 96, .value = 0x2046 }, ++ { .offset = 97, .value = 0xfe69 }, ++ { .offset = 98, .value = 0x1726 }, ++ { .offset = 99, .value = 0xfa5c }, ++ { .offset = 112, .value = 0x2046 }, ++ { .offset = 113, .value = 0xfea8 }, ++ { .offset = 114, .value = 0x1978 }, ++ { .offset = 115, .value = 0xfa26 }, ++ { .offset = 161, .value = 0x2222 }, ++ { .offset = 169, .value = 0x2222 }, ++ { .offset = 171, .value = 0x2222 }, ++ { .offset = 173, .value = 0x2222 }, ++ { .offset = 174, .value = 0x4444 }, ++ { .offset = 175, .value = 0x2222 }, ++ { .offset = 176, .value = 0x4444 }, ++}; ++ ++static struct board_info __initdata board_AD1018 = { ++ .name = "96328avngr", ++ .expected_cpu_id = 0x6328, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "FIBRE", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "LAN3", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "LAN2", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "LAN1", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM43217, ++ .pci_bus = 1, ++ .pci_dev = 0, ++ .board_fixups = ad1018_fixups, ++ .num_board_fixups = ARRAY_SIZE(ad1018_fixups), ++ }, ++}; ++ + static struct sprom_fixup __initdata ar5381u_fixups[] = { + { .offset = 97, .value = 0xfee5 }, + { .offset = 98, .value = 0x157c }, +@@ -1071,6 +1136,7 @@ static const struct board_info __initcon + #endif /* CONFIG_BCM63XX_CPU_6318 */ + #ifdef CONFIG_BCM63XX_CPU_6328 + &board_96328avng, ++ &board_AD1018, + &board_AR5381u, + &board_AR5387un, + &board_963281TAN, +@@ -1127,6 +1193,8 @@ static struct of_device_id const bcm963x + { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, }, + { .compatible = "nucom,r5010un-v2", .data = &board_R5010UNV2, }, + { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, }, ++ { .compatible = "sercomm,ad1018", .data = &board_AD1018, }, ++ { .compatible = "sercomm,ad1018-nor", .data = &board_AD1018, }, + #endif /* CONFIG_BCM63XX_CPU_6328 */ + #ifdef CONFIG_BCM63XX_CPU_6338 + { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, }, diff --git a/target/linux/bcm63xx/patches-5.4/531-board-bcm6328-adb-pdg-a4001n-a-000-1a1-ax.patch b/target/linux/bcm63xx/patches-5.4/531-board-bcm6328-adb-pdg-a4001n-a-000-1a1-ax.patch new file mode 100644 index 0000000000..3b08649bbc --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/531-board-bcm6328-adb-pdg-a4001n-a-000-1a1-ax.patch @@ -0,0 +1,68 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -616,6 +616,49 @@ static struct board_info __initdata boar + }, + }; + ++static struct board_info __initdata board_PDG_A4001N_A_000_1A1_AX = { ++ .name = "96328avng", ++ .expected_cpu_id = 0x6328, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 4", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM43225, ++ .pci_bus = 1, ++ .pci_dev = 0, ++ }, ++}; ++ + static struct board_info __initdata board_A4001N1 = { + .name = "963281T_TEF", + .expected_cpu_id = 0x6328, +@@ -1141,6 +1184,7 @@ static const struct board_info __initcon + &board_AR5387un, + &board_963281TAN, + &board_A4001N, ++ &board_PDG_A4001N_A_000_1A1_AX, + &board_A4001N1, + &board_dsl_274xb_f1, + &board_FAST2704V2, +@@ -1186,6 +1230,7 @@ static struct of_device_id const bcm963x + #ifdef CONFIG_BCM63XX_CPU_6328 + { .compatible = "adb,a4001n", .data = &board_A4001N, }, + { .compatible = "adb,a4001n1", .data = &board_A4001N1, }, ++ { .compatible = "adb,pdg-a4001n-a-000-1a1-ax", .data = &board_PDG_A4001N_A_000_1A1_AX, }, + { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, }, + { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, + { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, }, diff --git a/target/linux/bcm63xx/patches-5.4/531-board_rta770bw_rta770w.patch b/target/linux/bcm63xx/patches-5.4/531-board_rta770bw_rta770w.patch deleted file mode 100644 index aa01f153db..0000000000 --- a/target/linux/bcm63xx/patches-5.4/531-board_rta770bw_rta770w.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -406,6 +406,19 @@ static struct board_info __initdata boar - .name = "96345GW2", - .expected_cpu_id = 0x6345, - }; -+ -+static struct board_info __initdata board_rta770w = { -+ .name = "RTA770BW", -+ .expected_cpu_id = 0x6345, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6345 */ - - /* -@@ -1256,6 +1269,7 @@ static const struct board_info __initcon - #endif /* CONFIG_BCM63XX_CPU_6338 */ - #ifdef CONFIG_BCM63XX_CPU_6345 - &board_96345gw2, -+ &board_rta770w, - #endif /* CONFIG_BCM63XX_CPU_6345 */ - #ifdef CONFIG_BCM63XX_CPU_6348 - &board_96348r, -@@ -1325,6 +1339,8 @@ static struct of_device_id const bcm963x - #endif /* CONFIG_BCM63XX_CPU_6338 */ - #ifdef CONFIG_BCM63XX_CPU_6345 - { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, }, -+ { .compatible = "dynalink,rta770bw", .data = &board_rta770w, }, -+ { .compatible = "dynalink,rta770w", .data = &board_rta770w, }, - #endif /* CONFIG_BCM63XX_CPU_6345 */ - #ifdef CONFIG_BCM63XX_CPU_6348 - { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, }, diff --git a/target/linux/bcm63xx/patches-5.4/532-board_hw556.patch b/target/linux/bcm63xx/patches-5.4/532-board_hw556.patch deleted file mode 100644 index 890e2e01d5..0000000000 --- a/target/linux/bcm63xx/patches-5.4/532-board_hw556.patch +++ /dev/null @@ -1,125 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -12,6 +12,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -1100,6 +1101,94 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_HW556_A = { -+ .name = "HW556_A", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_caldata = 1, -+ .caldata = { -+ { -+ .vendor = PCI_VENDOR_ID_ATHEROS, -+ .caldata_offset = 0xf7e000, -+ .slot = 1, -+ .endian_check = 1, -+ .led_pin = 2, -+ .led_active_high = 1, -+ }, -+ }, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+ -+static struct board_info __initdata board_HW556_B = { -+ .name = "HW556_B", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_caldata = 1, -+ .caldata = { -+ { -+ .vendor = PCI_VENDOR_ID_ATHEROS, -+ .caldata_offset = 0xefe000, -+ .slot = 1, -+ .endian_check = 1, -+ .led_pin = 2, -+ .led_active_high = 1, -+ }, -+ }, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+ -+static struct board_info __initdata board_HW556_C = { -+ .name = "HW556_C", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_caldata = 1, -+ .caldata = { -+ { -+ .vendor = PCI_VENDOR_ID_RALINK, -+ .caldata_offset = 0xeffe00, -+ .slot = 1, -+ .eeprom = "rt2x00.eeprom", -+ }, -+ }, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+ - /* T-Home Speedport W 303V Typ B */ - static struct board_info __initdata board_spw303v = { - .name = "96358-502V", -@@ -1304,6 +1393,9 @@ static const struct board_info __initcon - &board_nb4_fxc_r1, - &board_ct6373_1, - &board_HW553, -+ &board_HW556_A, -+ &board_HW556_B, -+ &board_HW556_C, - &board_spw303v, - &board_DVAG3810BN, - #endif /* CONFIG_BCM63XX_CPU_6358 */ -@@ -1377,6 +1469,9 @@ static struct of_device_id const bcm963x - { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, }, - { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, }, - { .compatible = "huawei,echolife-hg553", .data = &board_HW553, }, -+ { .compatible = "huawei,echolife-hg556a-a", .data = &board_HW556_A, }, -+ { .compatible = "huawei,echolife-hg556a-b", .data = &board_HW556_B, }, -+ { .compatible = "huawei,echolife-hg556a-c", .data = &board_HW556_C, }, - { .compatible = "pirelli,a226g", .data = &board_DWVS0, }, - { .compatible = "pirelli,a226m", .data = &board_DWVS0, }, - { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, }, diff --git a/target/linux/bcm63xx/patches-5.4/534-board_fast2704.patch b/target/linux/bcm63xx/patches-5.4/534-board_fast2704.patch deleted file mode 100644 index 8edbc57101..0000000000 --- a/target/linux/bcm63xx/patches-5.4/534-board_fast2704.patch +++ /dev/null @@ -1,73 +0,0 @@ -From: Marcin Jurkowski -Date: Thu, 31 Oct 2013 22:33:10 +0000 -Subject: [PATCH] bcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL - router - -This adds kernel support support for Sagemcom F@st 2704 wireless ADSL -router. -It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+ -modem equipped with 64 MiB RAM and 8 MiB flash. - -Signed-off-by: Marcin Jurkowski ---- ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -338,6 +338,42 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_FAST2704V2 = { -+ .name = "F@ST2704V2", -+ .expected_cpu_id = 0x6328, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .has_usbd = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6328 */ - - /* -@@ -1349,6 +1385,7 @@ static const struct board_info __initcon - &board_963281TAN, - &board_A4001N1, - &board_dsl_274xb_f1, -+ &board_FAST2704V2, - #endif /* CONFIG_BCM63XX_CPU_6328 */ - #ifdef CONFIG_BCM63XX_CPU_6338 - &board_96338gw, -@@ -1422,6 +1459,7 @@ static struct of_device_id const bcm963x - { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, }, - { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, }, - { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, }, -+ { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, }, - #endif /* CONFIG_BCM63XX_CPU_6328 */ - #ifdef CONFIG_BCM63XX_CPU_6338 - { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, }, diff --git a/target/linux/bcm63xx/patches-5.4/535-board_fast2504n.patch b/target/linux/bcm63xx/patches-5.4/535-board_fast2504n.patch deleted file mode 100644 index ab5b61880f..0000000000 --- a/target/linux/bcm63xx/patches-5.4/535-board_fast2504n.patch +++ /dev/null @@ -1,62 +0,0 @@ -From: Max Staudt -Date: Wed, 15 Jan 2014 18:51:13 +0000 -Subject: [PATCH] bcm63xx: F@ST2504n board support (Linux-3.10.26) - -Signed-off-by: Max Staudt ---- ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1288,6 +1288,37 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_fast2504n = { -+ .name = "F@ST2504n", -+ .expected_cpu_id = 0x6362, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6362 */ - - /* -@@ -1438,6 +1469,7 @@ static const struct board_info __initcon - #endif /* CONFIG_BCM63XX_CPU_6358 */ - #ifdef CONFIG_BCM63XX_CPU_6362 - &board_nb6, -+ &board_fast2504n, - #endif /* CONFIG_BCM63XX_CPU_6362 */ - #ifdef CONFIG_BCM63XX_CPU_6368 - &board_96368mvwg, -@@ -1520,6 +1552,7 @@ static struct of_device_id const bcm963x - { .compatible = "telsey,cpva642", .data = &board_CPVA642, }, - #endif /* CONFIG_BCM63XX_CPU_6358 */ - #ifdef CONFIG_BCM63XX_CPU_6362 -+ { .compatible = "sagem,fast-2504n", .data = &board_fast2504n, }, - { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, }, - #endif /* CONFIG_BCM63XX_CPU_6362 */ - #ifdef CONFIG_BCM63XX_CPU_6368 diff --git a/target/linux/bcm63xx/patches-5.4/536-board_96318ref.patch b/target/linux/bcm63xx/patches-5.4/536-board_96318ref.patch deleted file mode 100644 index dee7659d20..0000000000 --- a/target/linux/bcm63xx/patches-5.4/536-board_96318ref.patch +++ /dev/null @@ -1,74 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -50,6 +50,53 @@ static struct board_info __initdata boar - #endif /* CONFIG_BCM63XX_CPU_3368 */ - - /* -+ * known 6318 boards -+ */ -+#ifdef CONFIG_BCM63XX_CPU_6318 -+static struct board_info __initdata board_96318ref = { -+ .name = "96318REF", -+ .expected_cpu_id = 0x6318, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_usbd = 1, -+ .usbd = { -+ .use_fullspeed = 0, -+ .port_no = 0, -+ }, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+}; -+#endif /* CONFIG_BCM63XX_CPU_6318 */ -+ -+/* - * known 6328 boards - */ - #ifdef CONFIG_BCM63XX_CPU_6328 -@@ -1409,6 +1456,9 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_3368 - &board_cvg834g, - #endif /* CONFIG_BCM63XX_CPU_3368 */ -+#ifdef CONFIG_BCM63XX_CPU_6318 -+ &board_96318ref, -+#endif /* CONFIG_BCM63XX_CPU_6318 */ - #ifdef CONFIG_BCM63XX_CPU_6328 - &board_96328avng, - &board_AR5381u, -@@ -1483,6 +1533,7 @@ static struct of_device_id const bcm963x - { .compatible = "netgear,cvg834g", .data = &board_cvg834g, }, - #endif /* CONFIG_BCM63XX_CPU_3368 */ - #ifdef CONFIG_BCM63XX_CPU_6318 -+ { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, }, - #endif /* CONFIG_BCM63XX_CPU_6318 */ - #ifdef CONFIG_BCM63XX_CPU_6328 - { .compatible = "adb,a4001n1", .data = &board_A4001N1, }, diff --git a/target/linux/bcm63xx/patches-5.4/537-board_96318ref_p300.patch b/target/linux/bcm63xx/patches-5.4/537-board_96318ref_p300.patch deleted file mode 100644 index 337d30114d..0000000000 --- a/target/linux/bcm63xx/patches-5.4/537-board_96318ref_p300.patch +++ /dev/null @@ -1,67 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -94,6 +94,48 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_96318ref_p300 = { -+ .name = "96318REF_P300", -+ .expected_cpu_id = 0x6318, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_usbd = 1, -+ .usbd = { -+ .use_fullspeed = 0, -+ .port_no = 0, -+ }, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6318 */ - - /* -@@ -1458,6 +1500,7 @@ static const struct board_info __initcon - #endif /* CONFIG_BCM63XX_CPU_3368 */ - #ifdef CONFIG_BCM63XX_CPU_6318 - &board_96318ref, -+ &board_96318ref_p300, - #endif /* CONFIG_BCM63XX_CPU_6318 */ - #ifdef CONFIG_BCM63XX_CPU_6328 - &board_96328avng, -@@ -1534,6 +1577,7 @@ static struct of_device_id const bcm963x - #endif /* CONFIG_BCM63XX_CPU_3368 */ - #ifdef CONFIG_BCM63XX_CPU_6318 - { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, }, -+ { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, }, - #endif /* CONFIG_BCM63XX_CPU_6318 */ - #ifdef CONFIG_BCM63XX_CPU_6328 - { .compatible = "adb,a4001n1", .data = &board_A4001N1, }, diff --git a/target/linux/bcm63xx/patches-5.4/538-board_bcm963269bhr.patch b/target/linux/bcm63xx/patches-5.4/538-board_bcm963269bhr.patch deleted file mode 100644 index c1125f00ed..0000000000 --- a/target/linux/bcm63xx/patches-5.4/538-board_bcm963269bhr.patch +++ /dev/null @@ -1,67 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1492,6 +1492,46 @@ static struct board_info __initdata boar - #endif /* CONFIG_BCM63XX_CPU_6368 */ - - /* -+ * known 63268/63269 boards -+ */ -+#ifdef CONFIG_BCM63XX_CPU_63268 -+static struct board_info __initdata board_963269bhr = { -+ .name = "963269BHR", -+ .expected_cpu_id = 0x63268, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "port1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "port2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "port3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "port4", -+ }, -+ }, -+ }, -+}; -+#endif /* CONFIG_BCM63XX_CPU_63268 */ -+ -+/* - * all boards - */ - static const struct board_info __initconst *bcm963xx_boards[] = { -@@ -1568,6 +1608,9 @@ static const struct board_info __initcon - &board_96368mvwg, - &board_96368mvngr, - #endif /* CONFIG_BCM63XX_CPU_6368 */ -+#ifdef CONFIG_BCM63XX_CPU_63268 -+ &board_963269bhr, -+#endif /* CONFIG_BCM63XX_CPU_63268 */ - }; - - static struct of_device_id const bcm963xx_boards_dt[] = { -@@ -1655,6 +1698,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 -+ { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, }, - #endif /* CONFIG_BCM63XX_CPU_63268 */ - #endif /* CONFIG_OF */ - { }, diff --git a/target/linux/bcm63xx/patches-5.4/539-board_AR1004G.patch b/target/linux/bcm63xx/patches-5.4/539-board_AR1004G.patch deleted file mode 100644 index cc16adf402..0000000000 --- a/target/linux/bcm63xx/patches-5.4/539-board_AR1004G.patch +++ /dev/null @@ -1,48 +0,0 @@ -From: "mexit@o2.pl" -Date: Sun, 24 Nov 2013 21:33:38 +0000 -Subject: [PATCH 4/5] bcm63xx: add support for Asmax AR 1004g router - -Support for Asmax AR 1004g router - -Signed-off-by: Adrian Feliks ---- ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -617,6 +617,21 @@ static struct board_info __initdata boar - .has_ehci0 = 1, - }; - -+static struct board_info __initdata board_96348gw_10_AR1004G = { -+ .name = "AR1004G", -+ .expected_cpu_id = 0x6348, -+ -+ .has_pci = 1, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+ - /* BT Voyager 2110 */ - static struct board_info __initdata board_V2110 = { - .name = "V2110", -@@ -1582,6 +1597,7 @@ static const struct board_info __initcon - &board_96348A_122, - &board_CPVA502plus, - &board_96348W3, -+ &board_96348gw_10_AR1004G, - #endif /* CONFIG_BCM63XX_CPU_6348 */ - #ifdef CONFIG_BCM63XX_CPU_6358 - &board_96358vw, -@@ -1643,6 +1659,7 @@ static struct of_device_id const bcm963x - { .compatible = "dynalink,rta770w", .data = &board_rta770w, }, - #endif /* CONFIG_BCM63XX_CPU_6345 */ - #ifdef CONFIG_BCM63XX_CPU_6348 -+ { .compatible = "asmax,ar-1004g", .data = &board_96348gw_10_AR1004G, }, - { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, }, - { .compatible = "brcm,bcm96348r", .data = &board_96348r, }, - { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, }, diff --git a/target/linux/bcm63xx/patches-5.4/540-board_vw6339gu.patch b/target/linux/bcm63xx/patches-5.4/540-board_vw6339gu.patch deleted file mode 100644 index f582780ed4..0000000000 --- a/target/linux/bcm63xx/patches-5.4/540-board_vw6339gu.patch +++ /dev/null @@ -1,67 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1544,6 +1544,48 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_vw6339gu = { -+ .name = "VW6339GU", -+ .expected_cpu_id = 0x63268, -+ -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "LAN2", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "LAN3", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "LAN4", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "LAN1", -+ }, -+ [4] = { -+ .used = 1, -+ .phy_id = 7, -+ .name = "WAN", -+ .mii_override = 1, -+ .timing_sel = 1, -+ }, -+ }, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_63268 */ - - /* -@@ -1626,6 +1668,7 @@ static const struct board_info __initcon - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 - &board_963269bhr, -+ &board_vw6339gu, - #endif /* CONFIG_BCM63XX_CPU_63268 */ - }; - -@@ -1716,6 +1759,7 @@ static struct of_device_id const bcm963x - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 - { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, }, -+ { .compatible = "inteno,vg50", .data = &board_vw6339gu, }, - #endif /* CONFIG_BCM63XX_CPU_63268 */ - #endif /* CONFIG_OF */ - { }, diff --git a/target/linux/bcm63xx/patches-5.4/541-board-bcm6338-d-link-dsl-2640u.patch b/target/linux/bcm63xx/patches-5.4/541-board-bcm6338-d-link-dsl-2640u.patch new file mode 100644 index 0000000000..2c6a4950bb --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/541-board-bcm6338-d-link-dsl-2640u.patch @@ -0,0 +1,38 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -858,6 +858,19 @@ static struct board_info __initdata boar + .force_duplex_full = 1, + }, + }; ++ ++static struct board_info __initdata board_96338w2_e7t = { ++ .name = "96338W2_E7T", ++ .expected_cpu_id = 0x6338, ++ ++ .has_enet0 = 1, ++ .enet0 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; + #endif /* CONFIG_BCM63XX_CPU_6338 */ + + /* +@@ -1193,6 +1206,7 @@ static const struct board_info __initcon + #ifdef CONFIG_BCM63XX_CPU_6338 + &board_96338gw, + &board_96338w, ++ &board_96338w2_e7t, + #endif /* CONFIG_BCM63XX_CPU_6338 */ + #ifdef CONFIG_BCM63XX_CPU_6345 + &board_96345gw2, +@@ -1244,6 +1258,7 @@ static struct of_device_id const bcm963x + #ifdef CONFIG_BCM63XX_CPU_6338 + { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, }, + { .compatible = "brcm,bcm96338w", .data = &board_96338w, }, ++ { .compatible = "d-link,dsl-2640u", .data = &board_96338w2_e7t, }, + #endif /* CONFIG_BCM63XX_CPU_6338 */ + #ifdef CONFIG_BCM63XX_CPU_6345 + { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, }, diff --git a/target/linux/bcm63xx/patches-5.4/541-board_963268gu_p300.patch b/target/linux/bcm63xx/patches-5.4/541-board_963268gu_p300.patch deleted file mode 100644 index 00c69a907b..0000000000 --- a/target/linux/bcm63xx/patches-5.4/541-board_963268gu_p300.patch +++ /dev/null @@ -1,84 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1510,6 +1510,65 @@ static struct board_info __initdata boar - * known 63268/63269 boards - */ - #ifdef CONFIG_BCM63XX_CPU_63268 -+static struct board_info __initdata board_963268bu_p300 = { -+ .name = "963268BU_P300", -+ .expected_cpu_id = 0x63268, -+ -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_usbd = 1, -+ .usbd = { -+ .use_fullspeed = 0, -+ .port_no = 0, -+ }, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 17, -+ .name = "FE1", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "GbE2", -+ }, -+ [4] = { -+ .used = 1, -+ .phy_id = 0, -+ .name = "GbE3", -+ .mii_override = 1, -+ .timing_sel = 1, -+ }, -+ [5] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "GbE1", -+ .mii_override = 1, -+ .timing_sel = 1, -+ }, -+ [6] = { -+ .used = 1, -+ .phy_id = 24, -+ .name = "GbE4", -+ .mii_override = 1, -+ .timing_sel = 1, -+ }, -+ [7] = { -+ .used = 1, -+ .phy_id = 25, -+ .name = "GbE5", -+ .mii_override = 1, -+ .timing_sel = 1, -+ }, -+ }, -+ }, -+}; -+ - static struct board_info __initdata board_963269bhr = { - .name = "963269BHR", - .expected_cpu_id = 0x63268, -@@ -1667,6 +1726,7 @@ static const struct board_info __initcon - &board_96368mvngr, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 -+ &board_963268bu_p300, - &board_963269bhr, - &board_vw6339gu, - #endif /* CONFIG_BCM63XX_CPU_63268 */ -@@ -1758,6 +1818,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 -+ { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, }, - { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, }, - { .compatible = "inteno,vg50", .data = &board_vw6339gu, }, - #endif /* CONFIG_BCM63XX_CPU_63268 */ diff --git a/target/linux/bcm63xx/patches-5.4/542-board_WAP-5813n.patch b/target/linux/bcm63xx/patches-5.4/542-board_WAP-5813n.patch deleted file mode 100644 index 168e0c6ef2..0000000000 --- a/target/linux/bcm63xx/patches-5.4/542-board_WAP-5813n.patch +++ /dev/null @@ -1,75 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -13,6 +13,8 @@ - #include - #include - #include -+#include -+#include - #include - #include - #include -@@ -1504,6 +1506,47 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct sprom_fixup __initdata wap5813n_fixups[] = { -+ { .offset = 97, .value = 0xfeed }, -+ { .offset = 98, .value = 0x15d1 }, -+ { .offset = 99, .value = 0xfb0d }, -+ { .offset = 113, .value = 0xfef7 }, -+ { .offset = 114, .value = 0x15f7 }, -+ { .offset = 115, .value = 0xfb1a }, -+}; -+ -+static struct board_info __initdata board_WAP5813n = { -+ .name = "96369R-1231N", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [4] = { -+ .used = 1, -+ .phy_id = 0xff, -+ .bypass_link = 1, -+ .force_speed = 1000, -+ .force_duplex_full = 1, -+ .name = "RGMII", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM43222, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ .board_fixups = wap5813n_fixups, -+ .num_board_fixups = ARRAY_SIZE(wap5813n_fixups), -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6368 */ - - /* -@@ -1724,6 +1767,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6368 - &board_96368mvwg, - &board_96368mvngr, -+ &board_WAP5813n, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 - &board_963268bu_p300, -@@ -1816,6 +1860,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_6368 - { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, }, - { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, -+ { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 - { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, }, diff --git a/target/linux/bcm63xx/patches-5.4/542-board_bcm6338-dynalink-rta1320.patch b/target/linux/bcm63xx/patches-5.4/542-board_bcm6338-dynalink-rta1320.patch new file mode 100644 index 0000000000..d3b048a6ac --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/542-board_bcm6338-dynalink-rta1320.patch @@ -0,0 +1,38 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -871,6 +871,19 @@ static struct board_info __initdata boar + .force_duplex_full = 1, + }, + }; ++ ++static struct board_info __initdata board_rta1320_16m = { ++ .name = "RTA1320_16M", ++ .expected_cpu_id = 0x6338, ++ ++ .has_enet0 = 1, ++ .enet0 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; + #endif /* CONFIG_BCM63XX_CPU_6338 */ + + /* +@@ -1207,6 +1220,7 @@ static const struct board_info __initcon + &board_96338gw, + &board_96338w, + &board_96338w2_e7t, ++ &board_rta1320_16m, + #endif /* CONFIG_BCM63XX_CPU_6338 */ + #ifdef CONFIG_BCM63XX_CPU_6345 + &board_96345gw2, +@@ -1258,6 +1272,7 @@ static struct of_device_id const bcm963x + #ifdef CONFIG_BCM63XX_CPU_6338 + { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, }, + { .compatible = "brcm,bcm96338w", .data = &board_96338w, }, ++ { .compatible = "dynalink,rta1320", .data = &board_rta1320_16m, }, + { .compatible = "d-link,dsl-2640u", .data = &board_96338w2_e7t, }, + #endif /* CONFIG_BCM63XX_CPU_6338 */ + #ifdef CONFIG_BCM63XX_CPU_6345 diff --git a/target/linux/bcm63xx/patches-5.4/543-board_VR-3025u.patch b/target/linux/bcm63xx/patches-5.4/543-board_VR-3025u.patch deleted file mode 100644 index 55e4ec02dd..0000000000 --- a/target/linux/bcm63xx/patches-5.4/543-board_VR-3025u.patch +++ /dev/null @@ -1,78 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1507,6 +1507,59 @@ static struct board_info __initdata boar - }, - }; - -+static struct sprom_fixup __initdata vr3025u_fixups[] = { -+ { .offset = 97, .value = 0xfeb3 }, -+ { .offset = 98, .value = 0x1618 }, -+ { .offset = 99, .value = 0xfab0 }, -+ { .offset = 113, .value = 0xfed1 }, -+ { .offset = 114, .value = 0x1609 }, -+ { .offset = 115, .value = 0xfad9 }, -+}; -+ -+static struct board_info __initdata board_VR3025u = { -+ .name = "96368M-1541N", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "port1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "port2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "port3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "port4", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM43222, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ .board_fixups = vr3025u_fixups, -+ .num_board_fixups = ARRAY_SIZE(vr3025u_fixups), -+ }, -+}; -+ - static struct sprom_fixup __initdata wap5813n_fixups[] = { - { .offset = 97, .value = 0xfeed }, - { .offset = 98, .value = 0x15d1 }, -@@ -1767,6 +1820,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6368 - &board_96368mvwg, - &board_96368mvngr, -+ &board_VR3025u, - &board_WAP5813n, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 -@@ -1860,6 +1914,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_6368 - { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, }, - { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, -+ { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, - { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 diff --git a/target/linux/bcm63xx/patches-5.4/544-board_VR-3025un.patch b/target/linux/bcm63xx/patches-5.4/544-board_VR-3025un.patch deleted file mode 100644 index 45293c8291..0000000000 --- a/target/linux/bcm63xx/patches-5.4/544-board_VR-3025un.patch +++ /dev/null @@ -1,78 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1560,6 +1560,59 @@ static struct board_info __initdata boar - }, - }; - -+static struct sprom_fixup __initdata vr3025un_fixups[] = { -+ { .offset = 97, .value = 0xfeb3 }, -+ { .offset = 98, .value = 0x1618 }, -+ { .offset = 99, .value = 0xfab0 }, -+ { .offset = 113, .value = 0xfed1 }, -+ { .offset = 114, .value = 0x1609 }, -+ { .offset = 115, .value = 0xfad9 }, -+}; -+ -+static struct board_info __initdata board_VR3025un = { -+ .name = "96368M-1341N", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "port1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "port2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "port3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "port4", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM43222, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ .board_fixups = vr3025un_fixups, -+ .num_board_fixups = ARRAY_SIZE(vr3025un_fixups), -+ }, -+}; -+ - static struct sprom_fixup __initdata wap5813n_fixups[] = { - { .offset = 97, .value = 0xfeed }, - { .offset = 98, .value = 0x15d1 }, -@@ -1821,6 +1874,7 @@ static const struct board_info __initcon - &board_96368mvwg, - &board_96368mvngr, - &board_VR3025u, -+ &board_VR3025un, - &board_WAP5813n, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 -@@ -1915,6 +1969,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, }, - { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, - { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, -+ { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, }, - { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 diff --git a/target/linux/bcm63xx/patches-5.4/545-board_P870HW-51a_v2.patch b/target/linux/bcm63xx/patches-5.4/545-board_P870HW-51a_v2.patch deleted file mode 100644 index ce76703d88..0000000000 --- a/target/linux/bcm63xx/patches-5.4/545-board_P870HW-51a_v2.patch +++ /dev/null @@ -1,67 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1516,6 +1516,48 @@ static struct sprom_fixup __initdata vr3 - { .offset = 115, .value = 0xfad9 }, - }; - -+static struct board_info __initdata board_P870HW51A_V2 = { -+ .name = "P870HW-51a_v2", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "port1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "port2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "port3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "port4", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM4318, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ }, -+}; -+ - static struct board_info __initdata board_VR3025u = { - .name = "96368M-1541N", - .expected_cpu_id = 0x6368, -@@ -1873,6 +1915,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6368 - &board_96368mvwg, - &board_96368mvngr, -+ &board_P870HW51A_V2, - &board_VR3025u, - &board_VR3025un, - &board_WAP5813n, -@@ -1971,6 +2014,7 @@ static struct of_device_id const bcm963x - { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, - { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, }, - { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, -+ { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 - { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, }, diff --git a/target/linux/bcm63xx/patches-5.4/546-board_hw520.patch b/target/linux/bcm63xx/patches-5.4/546-board_hw520.patch deleted file mode 100644 index a29f9bd573..0000000000 --- a/target/linux/bcm63xx/patches-5.4/546-board_hw520.patch +++ /dev/null @@ -1,55 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1218,6 +1218,36 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_HW520 = { -+ .name = "HW6358GW_B", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM4318, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ }, -+}; -+ - static struct board_info __initdata board_HW553 = { - .name = "HW553", - .expected_cpu_id = 0x6358, -@@ -1901,6 +1931,7 @@ static const struct board_info __initcon - &board_nb4_ser_r0, - &board_nb4_fxc_r1, - &board_ct6373_1, -+ &board_HW520, - &board_HW553, - &board_HW556_A, - &board_HW556_B, -@@ -1991,6 +2022,7 @@ static struct of_device_id const bcm963x - { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, }, - { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, }, - { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, }, -+ { .compatible = "huawei,echolife-hg520v", .data = &board_HW520, }, - { .compatible = "huawei,echolife-hg553", .data = &board_HW553, }, - { .compatible = "huawei,echolife-hg556a-a", .data = &board_HW556_A, }, - { .compatible = "huawei,echolife-hg556a-b", .data = &board_HW556_B, }, diff --git a/target/linux/bcm63xx/patches-5.4/547-board_A4001N.patch b/target/linux/bcm63xx/patches-5.4/547-board_A4001N.patch deleted file mode 100644 index ec5313bb01..0000000000 --- a/target/linux/bcm63xx/patches-5.4/547-board_A4001N.patch +++ /dev/null @@ -1,68 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -343,6 +343,49 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_A4001N = { -+ .name = "96328dg2x2", -+ .expected_cpu_id = 0x6328, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM43225, -+ .pci_bus = 1, -+ .pci_dev = 0, -+ }, -+}; -+ - static struct board_info __initdata board_A4001N1 = { - .name = "963281T_TEF", - .expected_cpu_id = 0x6328, -@@ -1884,6 +1927,7 @@ static const struct board_info __initcon - &board_AR5381u, - &board_AR5387un, - &board_963281TAN, -+ &board_A4001N, - &board_A4001N1, - &board_dsl_274xb_f1, - &board_FAST2704V2, -@@ -1968,6 +2012,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, }, - #endif /* CONFIG_BCM63XX_CPU_6318 */ - #ifdef CONFIG_BCM63XX_CPU_6328 -+ { .compatible = "adb,a4001n", .data = &board_A4001N, }, - { .compatible = "adb,a4001n1", .data = &board_A4001N1, }, - { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, }, - { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, diff --git a/target/linux/bcm63xx/patches-5.4/548-board_dsl-2751b_e1.patch b/target/linux/bcm63xx/patches-5.4/548-board_dsl-2751b_e1.patch deleted file mode 100644 index a7beec0ac9..0000000000 --- a/target/linux/bcm63xx/patches-5.4/548-board_dsl-2751b_e1.patch +++ /dev/null @@ -1,91 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -138,6 +138,72 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = { -+ { .offset = 96, .value = 0x2046 }, -+ { .offset = 97, .value = 0xfe9d }, -+ { .offset = 98, .value = 0x1854 }, -+ { .offset = 99, .value = 0xfa59 }, -+ { .offset = 112, .value = 0x2046 }, -+ { .offset = 113, .value = 0xfe79 }, -+ { .offset = 114, .value = 0x17f5 }, -+ { .offset = 115, .value = 0xfa47 }, -+ { .offset = 161, .value = 0x2222 }, -+ { .offset = 162, .value = 0x2222 }, -+ { .offset = 169, .value = 0x2222 }, -+ { .offset = 170, .value = 0x2222 }, -+ { .offset = 171, .value = 0x5555 }, -+ { .offset = 172, .value = 0x5555 }, -+ { .offset = 173, .value = 0x4444 }, -+ { .offset = 174, .value = 0x4444 }, -+ { .offset = 175, .value = 0x5555 }, -+ { .offset = 176, .value = 0x5555 }, -+}; -+ -+static struct board_info __initdata board_dsl_2751b_d1 = { -+ .name = "AW5200B", -+ .expected_cpu_id = 0x6318, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM43217, -+ .pci_bus = 1, -+ .pci_dev = 0, -+ .board_fixups = dsl2751b_e1_fixups, -+ .num_board_fixups = ARRAY_SIZE(dsl2751b_e1_fixups), -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6318 */ - - /* -@@ -1921,6 +1987,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6318 - &board_96318ref, - &board_96318ref_p300, -+ &board_dsl_2751b_d1, - #endif /* CONFIG_BCM63XX_CPU_6318 */ - #ifdef CONFIG_BCM63XX_CPU_6328 - &board_96328avng, -@@ -2010,6 +2077,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_6318 - { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, }, - { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, }, -+ { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, }, - #endif /* CONFIG_BCM63XX_CPU_6318 */ - #ifdef CONFIG_BCM63XX_CPU_6328 - { .compatible = "adb,a4001n", .data = &board_A4001N, }, diff --git a/target/linux/bcm63xx/patches-5.4/549-board_DGND3700v1_3800B.patch b/target/linux/bcm63xx/patches-5.4/549-board_DGND3700v1_3800B.patch deleted file mode 100644 index a09cac1d53..0000000000 --- a/target/linux/bcm63xx/patches-5.4/549-board_DGND3700v1_3800B.patch +++ /dev/null @@ -1,49 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1646,6 +1646,30 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_DGND3700v1_3800B = { -+ .name = "DGND3700v1_3800B", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [5] = { -+ .used = 1, -+ .phy_id = 0xff, -+ .bypass_link = 1, -+ .force_speed = 1000, -+ .force_duplex_full = 1, -+ .name = "RGMII", -+ }, -+ }, -+ }, -+}; -+ - static struct sprom_fixup __initdata vr3025u_fixups[] = { - { .offset = 97, .value = 0xfeb3 }, - { .offset = 98, .value = 0x1618 }, -@@ -2057,6 +2081,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6368 - &board_96368mvwg, - &board_96368mvngr, -+ &board_DGND3700v1_3800B, - &board_P870HW51A_V2, - &board_VR3025u, - &board_VR3025un, -@@ -2159,6 +2184,7 @@ static struct of_device_id const bcm963x - { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, - { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, }, - { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, -+ { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, }, - { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 diff --git a/target/linux/bcm63xx/patches-5.4/550-board_homehub2a.patch b/target/linux/bcm63xx/patches-5.4/550-board_homehub2a.patch deleted file mode 100644 index dc81ea6b73..0000000000 --- a/target/linux/bcm63xx/patches-5.4/550-board_homehub2a.patch +++ /dev/null @@ -1,50 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1327,6 +1327,31 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_homehub2a = { -+ .name = "HOMEHUB2A", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM4322, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ }, -+}; -+ - static struct board_info __initdata board_HW520 = { - .name = "HW6358GW_B", - .expected_cpu_id = 0x6358, -@@ -2066,6 +2091,7 @@ static const struct board_info __initcon - &board_nb4_ser_r0, - &board_nb4_fxc_r1, - &board_ct6373_1, -+ &board_homehub2a, - &board_HW520, - &board_HW553, - &board_HW556_A, -@@ -2173,6 +2199,7 @@ static struct of_device_id const bcm963x - { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, }, - { .compatible = "t-com,speedport-w-303v", .data = &board_spw303v, }, - { .compatible = "telsey,cpva642", .data = &board_CPVA642, }, -+ { .compatible = "bt,home-hub-2-a", .data = &board_homehub2a, }, - #endif /* CONFIG_BCM63XX_CPU_6358 */ - #ifdef CONFIG_BCM63XX_CPU_6362 - { .compatible = "sagem,fast-2504n", .data = &board_fast2504n, }, diff --git a/target/linux/bcm63xx/patches-5.4/551-board_HG655b.patch b/target/linux/bcm63xx/patches-5.4/551-board_HG655b.patch deleted file mode 100644 index 24a7e08f83..0000000000 --- a/target/linux/bcm63xx/patches-5.4/551-board_HG655b.patch +++ /dev/null @@ -1,71 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1695,6 +1695,52 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_HG655b = { -+ .name = "HW65x", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_caldata = 1, -+ .caldata = { -+ { -+ .vendor = PCI_VENDOR_ID_RALINK, -+ .caldata_offset = 0x7c0000, -+ .slot = 1, -+ .eeprom = "rt2x00.eeprom", -+ }, -+ }, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "port1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "port2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "port3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "port4", -+ }, -+ }, -+ }, -+}; -+ - static struct sprom_fixup __initdata vr3025u_fixups[] = { - { .offset = 97, .value = 0xfeb3 }, - { .offset = 98, .value = 0x1618 }, -@@ -2108,6 +2154,7 @@ static const struct board_info __initcon - &board_96368mvwg, - &board_96368mvngr, - &board_DGND3700v1_3800B, -+ &board_HG655b, - &board_P870HW51A_V2, - &board_VR3025u, - &board_VR3025un, -@@ -2211,6 +2258,7 @@ static struct of_device_id const bcm963x - { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, - { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, }, - { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, -+ { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, }, - { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, }, - { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, - #endif /* CONFIG_BCM63XX_CPU_6368 */ diff --git a/target/linux/bcm63xx/patches-5.4/551-board_bcm6345-dynalink-rta770bw-rta770w.patch b/target/linux/bcm63xx/patches-5.4/551-board_bcm6345-dynalink-rta770bw-rta770w.patch new file mode 100644 index 0000000000..225c754924 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/551-board_bcm6345-dynalink-rta770bw-rta770w.patch @@ -0,0 +1,39 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -894,6 +894,19 @@ static struct board_info __initdata boar + .name = "96345GW2", + .expected_cpu_id = 0x6345, + }; ++ ++static struct board_info __initdata board_rta770w = { ++ .name = "RTA770BW", ++ .expected_cpu_id = 0x6345, ++ ++ .has_enet0 = 1, ++ .enet0 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; + #endif /* CONFIG_BCM63XX_CPU_6345 */ + + /* +@@ -1224,6 +1237,7 @@ static const struct board_info __initcon + #endif /* CONFIG_BCM63XX_CPU_6338 */ + #ifdef CONFIG_BCM63XX_CPU_6345 + &board_96345gw2, ++ &board_rta770w, + #endif /* CONFIG_BCM63XX_CPU_6345 */ + #ifdef CONFIG_BCM63XX_CPU_6348 + &board_96348r, +@@ -1277,6 +1291,8 @@ static struct of_device_id const bcm963x + #endif /* CONFIG_BCM63XX_CPU_6338 */ + #ifdef CONFIG_BCM63XX_CPU_6345 + { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, }, ++ { .compatible = "dynalink,rta770bw", .data = &board_rta770w, }, ++ { .compatible = "dynalink,rta770w", .data = &board_rta770w, }, + #endif /* CONFIG_BCM63XX_CPU_6345 */ + #ifdef CONFIG_BCM63XX_CPU_6348 + { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, }, diff --git a/target/linux/bcm63xx/patches-5.4/552-board_fast2704n.patch b/target/linux/bcm63xx/patches-5.4/552-board_fast2704n.patch deleted file mode 100644 index 5cf5cfafd2..0000000000 --- a/target/linux/bcm63xx/patches-5.4/552-board_fast2704n.patch +++ /dev/null @@ -1,68 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -204,6 +204,49 @@ static struct board_info __initdata boar - .num_board_fixups = ARRAY_SIZE(dsl2751b_e1_fixups), - }, - }; -+ -+static struct board_info __initdata board_FAST2704N = { -+ .name = "F@ST2704N", -+ .expected_cpu_id = 0x6318, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM43217, -+ .pci_bus = 1, -+ .pci_dev = 0, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6318 */ - - /* -@@ -2083,6 +2126,7 @@ static const struct board_info __initcon - &board_96318ref, - &board_96318ref_p300, - &board_dsl_2751b_d1, -+ &board_FAST2704N, - #endif /* CONFIG_BCM63XX_CPU_6318 */ - #ifdef CONFIG_BCM63XX_CPU_6328 - &board_96328avng, -@@ -2176,6 +2220,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, }, - { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, }, - { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, }, -+ { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, }, - #endif /* CONFIG_BCM63XX_CPU_6318 */ - #ifdef CONFIG_BCM63XX_CPU_6328 - { .compatible = "adb,a4001n", .data = &board_A4001N, }, diff --git a/target/linux/bcm63xx/patches-5.4/553-board_VR-3026e.patch b/target/linux/bcm63xx/patches-5.4/553-board_VR-3026e.patch deleted file mode 100644 index 5b9973932b..0000000000 --- a/target/linux/bcm63xx/patches-5.4/553-board_VR-3026e.patch +++ /dev/null @@ -1,78 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1932,6 +1932,59 @@ static struct board_info __initdata boar - }, - }; - -+static struct sprom_fixup __initdata vr3026e_fixups[] = { -+ { .offset = 97, .value = 0xfeb3 }, -+ { .offset = 98, .value = 0x1618 }, -+ { .offset = 99, .value = 0xfab0 }, -+ { .offset = 113, .value = 0xfed1 }, -+ { .offset = 114, .value = 0x1609 }, -+ { .offset = 115, .value = 0xfad9 }, -+}; -+ -+static struct board_info __initdata board_VR3026e = { -+ .name = "96368MT-1341N1", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "port1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "port2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "port3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "port4", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM43222, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ .board_fixups = vr3026e_fixups, -+ .num_board_fixups = ARRAY_SIZE(vr3026e_fixups), -+ }, -+}; -+ - static struct sprom_fixup __initdata wap5813n_fixups[] = { - { .offset = 97, .value = 0xfeed }, - { .offset = 98, .value = 0x15d1 }, -@@ -2202,6 +2255,7 @@ static const struct board_info __initcon - &board_P870HW51A_V2, - &board_VR3025u, - &board_VR3025un, -+ &board_VR3026e, - &board_WAP5813n, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 -@@ -2302,6 +2356,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, - { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, - { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, }, -+ { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, }, - { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, - { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, }, - { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, }, diff --git a/target/linux/bcm63xx/patches-5.4/554-board_R5010UNv2.patch b/target/linux/bcm63xx/patches-5.4/554-board_R5010UNv2.patch deleted file mode 100644 index fb99620823..0000000000 --- a/target/linux/bcm63xx/patches-5.4/554-board_R5010UNv2.patch +++ /dev/null @@ -1,69 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -617,6 +617,50 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_R5010UNV2 = { -+ .name = "96328ang", -+ .expected_cpu_id = 0x6328, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM43217, -+ .pci_bus = 1, -+ .pci_dev = 0, -+ }, -+}; -+ - #endif /* CONFIG_BCM63XX_CPU_6328 */ - - /* -@@ -2190,6 +2234,7 @@ static const struct board_info __initcon - &board_A4001N1, - &board_dsl_274xb_f1, - &board_FAST2704V2, -+ &board_R5010UNV2, - #endif /* CONFIG_BCM63XX_CPU_6328 */ - #ifdef CONFIG_BCM63XX_CPU_6338 - &board_96338gw, -@@ -2284,6 +2329,7 @@ static struct of_device_id const bcm963x - { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, }, - { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, }, - { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, }, -+ { .compatible = "nucom,r5010un-v2", .data = &board_R5010UNV2, }, - { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, }, - #endif /* CONFIG_BCM63XX_CPU_6328 */ - #ifdef CONFIG_BCM63XX_CPU_6338 diff --git a/target/linux/bcm63xx/patches-5.4/555-board_HG622.patch b/target/linux/bcm63xx/patches-5.4/555-board_HG622.patch deleted file mode 100644 index 13b26fc35e..0000000000 --- a/target/linux/bcm63xx/patches-5.4/555-board_HG622.patch +++ /dev/null @@ -1,71 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1828,6 +1828,52 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_HG622 = { -+ .name = "96368MVWG_hg622", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_caldata = 1, -+ .caldata = { -+ { -+ .vendor = PCI_VENDOR_ID_RALINK, -+ .caldata_offset = 0xfa0000, -+ .slot = 1, -+ .eeprom = "rt2x00.eeprom", -+ }, -+ }, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "port1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "port2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "port3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "port4", -+ }, -+ }, -+ }, -+}; -+ - static struct sprom_fixup __initdata vr3025u_fixups[] = { - { .offset = 97, .value = 0xfeb3 }, - { .offset = 98, .value = 0x1618 }, -@@ -2296,6 +2342,7 @@ static const struct board_info __initcon - &board_96368mvwg, - &board_96368mvngr, - &board_DGND3700v1_3800B, -+ &board_HG622, - &board_HG655b, - &board_P870HW51A_V2, - &board_VR3025u, -@@ -2404,6 +2451,7 @@ static struct of_device_id const bcm963x - { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, }, - { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, }, - { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, -+ { .compatible = "huawei,echolife-hg622", .data = &board_HG622, }, - { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, }, - { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, }, - { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, diff --git a/target/linux/bcm63xx/patches-5.4/556-board_EVG2000.patch b/target/linux/bcm63xx/patches-5.4/556-board_EVG2000.patch deleted file mode 100644 index c42cc61936..0000000000 --- a/target/linux/bcm63xx/patches-5.4/556-board_EVG2000.patch +++ /dev/null @@ -1,62 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1782,6 +1782,43 @@ static struct board_info __initdata boar - }, - }; - -+static struct sprom_fixup __initdata EVG2000_fixups[] = { -+ { .offset = 219, .value = 0xec08 }, -+}; -+ -+static struct board_info __initdata board_EVG2000 = { -+ .name = "96369PVG", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [5] = { -+ .used = 1, -+ .phy_id = 0xff, -+ .bypass_link = 1, -+ .force_speed = 1000, -+ .force_duplex_full = 1, -+ .name = "RGMII", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM4322, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ .board_fixups = EVG2000_fixups, -+ .num_board_fixups = ARRAY_SIZE(EVG2000_fixups), -+ }, -+}; -+ - static struct board_info __initdata board_HG655b = { - .name = "HW65x", - .expected_cpu_id = 0x6368, -@@ -2342,6 +2379,7 @@ static const struct board_info __initcon - &board_96368mvwg, - &board_96368mvngr, - &board_DGND3700v1_3800B, -+ &board_EVG2000, - &board_HG622, - &board_HG655b, - &board_P870HW51A_V2, -@@ -2454,6 +2492,7 @@ static struct of_device_id const bcm963x - { .compatible = "huawei,echolife-hg622", .data = &board_HG622, }, - { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, }, - { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, }, -+ { .compatible = "netgear,evg2000", .data = &board_EVG2000, }, - { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 diff --git a/target/linux/bcm63xx/patches-5.4/557-board_AV4202N.patch b/target/linux/bcm63xx/patches-5.4/557-board_AV4202N.patch deleted file mode 100644 index 10db0ab410..0000000000 --- a/target/linux/bcm63xx/patches-5.4/557-board_AV4202N.patch +++ /dev/null @@ -1,68 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1682,6 +1682,49 @@ static struct board_info __initdata boar - * known 6368 boards - */ - #ifdef CONFIG_BCM63XX_CPU_6368 -+static struct board_info __initdata board_AV4202N = { -+ .name = "96368_Swiss_S1", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "port1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "port2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "port3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "port4", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM4322, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ }, -+}; -+ - static struct board_info __initdata board_96368mvwg = { - .name = "96368MVWG", - .expected_cpu_id = 0x6368, -@@ -2376,6 +2419,7 @@ static const struct board_info __initcon - &board_fast2504n, - #endif /* CONFIG_BCM63XX_CPU_6362 */ - #ifdef CONFIG_BCM63XX_CPU_6368 -+ &board_AV4202N, - &board_96368mvwg, - &board_96368mvngr, - &board_DGND3700v1_3800B, -@@ -2483,6 +2527,7 @@ static struct of_device_id const bcm963x - { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, }, - #endif /* CONFIG_BCM63XX_CPU_6362 */ - #ifdef CONFIG_BCM63XX_CPU_6368 -+ { .compatible = "adb,av4202n", .data = &board_AV4202N, }, - { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, }, - { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, - { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, diff --git a/target/linux/bcm63xx/patches-5.4/558-board_VH4032N.patch b/target/linux/bcm63xx/patches-5.4/558-board_VH4032N.patch deleted file mode 100644 index d5be26bc18..0000000000 --- a/target/linux/bcm63xx/patches-5.4/558-board_VH4032N.patch +++ /dev/null @@ -1,125 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -2155,6 +2155,106 @@ static struct board_info __initdata boar - }, - }; - -+static struct sprom_fixup __initdata vh4032n_fixups[] = { -+ { .offset = 2, .value = 0x04d2 }, -+ { .offset = 4, .value = 0x4350 }, -+ { .offset = 65, .value = 0x1300 }, -+ { .offset = 68, .value = 0x0402 }, -+ { .offset = 70, .value = 0x0090 }, -+ { .offset = 71, .value = 0x4c19 }, -+ { .offset = 72, .value = 0x2345 }, -+ { .offset = 87, .value = 0x0315 }, -+ { .offset = 88, .value = 0x0315 }, -+ { .offset = 96, .value = 0x2048 }, -+ { .offset = 97, .value = 0xfed7 }, -+ { .offset = 98, .value = 0x15a6 }, -+ { .offset = 99, .value = 0xfaee }, -+ { .offset = 100, .value = 0x3e3a }, -+ { .offset = 101, .value = 0x3a36 }, -+ { .offset = 102, .value = 0xff7f }, -+ { .offset = 103, .value = 0x11b9 }, -+ { .offset = 104, .value = 0xfc53 }, -+ { .offset = 105, .value = 0xffe6 }, -+ { .offset = 106, .value = 0xfdd2 }, -+ { .offset = 107, .value = 0xfe49 }, -+ { .offset = 108, .value = 0xff6a }, -+ { .offset = 109, .value = 0x136e }, -+ { .offset = 110, .value = 0xfbed }, -+ { .offset = 111, .value = 0x0000 }, -+ { .offset = 112, .value = 0x2048 }, -+ { .offset = 113, .value = 0xfee2 }, -+ { .offset = 114, .value = 0x15e5 }, -+ { .offset = 115, .value = 0xfaed }, -+ { .offset = 116, .value = 0x3e3a }, -+ { .offset = 117, .value = 0x3a36 }, -+ { .offset = 118, .value = 0xffc8 }, -+ { .offset = 119, .value = 0x12b8 }, -+ { .offset = 120, .value = 0xfca1 }, -+ { .offset = 121, .value = 0xff9b }, -+ { .offset = 122, .value = 0x122a }, -+ { .offset = 123, .value = 0xfcc8 }, -+ { .offset = 124, .value = 0xff95 }, -+ { .offset = 125, .value = 0x146b }, -+ { .offset = 126, .value = 0xfbba }, -+ { .offset = 127, .value = 0x0000 }, -+ { .offset = 161, .value = 0x0000 }, -+ { .offset = 162, .value = 0x0000 }, -+ { .offset = 169, .value = 0x0000 }, -+ { .offset = 170, .value = 0x0000 }, -+ { .offset = 171, .value = 0x0000 }, -+ { .offset = 172, .value = 0x0000 }, -+ { .offset = 173, .value = 0x0000 }, -+ { .offset = 174, .value = 0x0000 }, -+ { .offset = 175, .value = 0x0000 }, -+ { .offset = 176, .value = 0x0000 }, -+ { .offset = 219, .value = 0x1108 }, -+}; -+ -+static struct board_info __initdata board_VH4032N = { -+ .name = "VH4032N", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "LAN4", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "LAN3", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "LAN2", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "LAN1", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM43222, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ .board_fixups = vh4032n_fixups, -+ .num_board_fixups = ARRAY_SIZE(vh4032n_fixups), -+ }, -+}; -+ - static struct sprom_fixup __initdata wap5813n_fixups[] = { - { .offset = 97, .value = 0xfeed }, - { .offset = 98, .value = 0x15d1 }, -@@ -2427,6 +2527,7 @@ static const struct board_info __initcon - &board_HG622, - &board_HG655b, - &board_P870HW51A_V2, -+ &board_VH4032N, - &board_VR3025u, - &board_VR3025un, - &board_VR3026e, -@@ -2538,6 +2639,7 @@ static struct of_device_id const bcm963x - { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, }, - { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, }, - { .compatible = "netgear,evg2000", .data = &board_EVG2000, }, -+ { .compatible = "observa,vh4032n", .data = &board_VH4032N, }, - { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 diff --git a/target/linux/bcm63xx/patches-5.4/559-board_R1000H.patch b/target/linux/bcm63xx/patches-5.4/559-board_R1000H.patch deleted file mode 100644 index 2de40e7cb7..0000000000 --- a/target/linux/bcm63xx/patches-5.4/559-board_R1000H.patch +++ /dev/null @@ -1,48 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -2005,6 +2005,29 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_R1000H = { -+ .name = "R1000H", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [5] = { -+ .used = 1, -+ .phy_id = 0xff, -+ .bypass_link = 1, -+ .force_speed = 1000, -+ .force_duplex_full = 1, -+ .name = "RGMII", -+ }, -+ }, -+ }, -+}; -+ - static struct board_info __initdata board_VR3025u = { - .name = "96368M-1541N", - .expected_cpu_id = 0x6368, -@@ -2527,6 +2550,7 @@ static const struct board_info __initcon - &board_HG622, - &board_HG655b, - &board_P870HW51A_V2, -+ &board_R1000H, - &board_VH4032N, - &board_VR3025u, - &board_VR3025un, -@@ -2628,6 +2652,7 @@ static struct of_device_id const bcm963x - { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, }, - #endif /* CONFIG_BCM63XX_CPU_6362 */ - #ifdef CONFIG_BCM63XX_CPU_6368 -+ { .compatible = "actiontec,r1000h", .data = &board_R1000H, }, - { .compatible = "adb,av4202n", .data = &board_AV4202N, }, - { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, }, - { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, diff --git a/target/linux/bcm63xx/patches-5.4/560-board_AR-5315u.patch b/target/linux/bcm63xx/patches-5.4/560-board_AR-5315u.patch deleted file mode 100644 index 38ef022e2a..0000000000 --- a/target/linux/bcm63xx/patches-5.4/560-board_AR-5315u.patch +++ /dev/null @@ -1,84 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -139,6 +139,65 @@ static struct board_info __initdata boar - }, - }; - -+static struct sprom_fixup __initdata ar5315u_fixups[] = { -+ { .offset = 6, .value = 0x1c00 }, -+ { .offset = 65, .value = 0x1255 }, -+ { .offset = 97, .value = 0xfe55 }, -+ { .offset = 98, .value = 0x171d }, -+ { .offset = 99, .value = 0xfa42 }, -+ { .offset = 113, .value = 0xfeb7 }, -+ { .offset = 114, .value = 0x18cd }, -+ { .offset = 115, .value = 0xfa4f }, -+ { .offset = 162, .value = 0x6444 }, -+ { .offset = 170, .value = 0x6444 }, -+ { .offset = 172, .value = 0x6444 }, -+}; -+ -+static struct board_info __initdata board_AR5315u = { -+ .name = "96318A-1441N1", -+ .expected_cpu_id = 0x6318, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "LAN4", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "LAN3", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "LAN2", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "LAN1", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM43217, -+ .pci_bus = 1, -+ .pci_dev = 0, -+ .board_fixups = ar5315u_fixups, -+ .num_board_fixups = ARRAY_SIZE(ar5315u_fixups), -+ }, -+}; -+ - static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = { - { .offset = 96, .value = 0x2046 }, - { .offset = 97, .value = 0xfe9d }, -@@ -2471,6 +2530,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6318 - &board_96318ref, - &board_96318ref_p300, -+ &board_AR5315u, - &board_dsl_2751b_d1, - &board_FAST2704N, - #endif /* CONFIG_BCM63XX_CPU_6318 */ -@@ -2572,6 +2632,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_6318 - { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, }, - { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, }, -+ { .compatible = "comtrend,ar-5315u", .data = &board_AR5315u, }, - { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, }, - { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, }, - #endif /* CONFIG_BCM63XX_CPU_6318 */ diff --git a/target/linux/bcm63xx/patches-5.4/561-board-bcm6348-D4PW.patch b/target/linux/bcm63xx/patches-5.4/561-board-bcm6348-D4PW.patch new file mode 100644 index 0000000000..62e8f381c1 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/561-board-bcm6348-D4PW.patch @@ -0,0 +1,40 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1093,6 +1093,21 @@ static struct board_info __initdata boar + + .has_ohci0 = 1, + }; ++ ++static struct board_info __initdata board_96348_D4PW = { ++ .name = "D-4P-W", ++ .expected_cpu_id = 0x6348, ++ ++ .has_pci = 1, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; + #endif /* CONFIG_BCM63XX_CPU_6348 */ + + /* +@@ -1248,6 +1263,7 @@ static const struct board_info __initcon + &board_DV201AMR, + &board_96348gw_a, + &board_rta1025w_16, ++ &board_96348_D4PW, + #endif /* CONFIG_BCM63XX_CPU_6348 */ + #ifdef CONFIG_BCM63XX_CPU_6358 + &board_96358vw, +@@ -1300,6 +1316,7 @@ static struct of_device_id const bcm963x + { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, }, + { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, }, + { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, }, ++ { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, }, + { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, }, + { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, }, + { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, }, diff --git a/target/linux/bcm63xx/patches-5.4/561-board_AD1018.patch b/target/linux/bcm63xx/patches-5.4/561-board_AD1018.patch deleted file mode 100644 index ea972ff451..0000000000 --- a/target/linux/bcm63xx/patches-5.4/561-board_AD1018.patch +++ /dev/null @@ -1,91 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -352,6 +352,71 @@ static struct board_info __initdata boar - }, - }; - -+static struct sprom_fixup __initdata ad1018_fixups[] = { -+ { .offset = 6, .value = 0x1c00 }, -+ { .offset = 65, .value = 0x1256 }, -+ { .offset = 96, .value = 0x2046 }, -+ { .offset = 97, .value = 0xfe69 }, -+ { .offset = 98, .value = 0x1726 }, -+ { .offset = 99, .value = 0xfa5c }, -+ { .offset = 112, .value = 0x2046 }, -+ { .offset = 113, .value = 0xfea8 }, -+ { .offset = 114, .value = 0x1978 }, -+ { .offset = 115, .value = 0xfa26 }, -+ { .offset = 161, .value = 0x2222 }, -+ { .offset = 169, .value = 0x2222 }, -+ { .offset = 171, .value = 0x2222 }, -+ { .offset = 173, .value = 0x2222 }, -+ { .offset = 174, .value = 0x4444 }, -+ { .offset = 175, .value = 0x2222 }, -+ { .offset = 176, .value = 0x4444 }, -+}; -+ -+static struct board_info __initdata board_AD1018 = { -+ .name = "96328avngr", -+ .expected_cpu_id = 0x6328, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "FIBRE", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "LAN3", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "LAN2", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "LAN1", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM43217, -+ .pci_bus = 1, -+ .pci_dev = 0, -+ .board_fixups = ad1018_fixups, -+ .num_board_fixups = ARRAY_SIZE(ad1018_fixups), -+ }, -+}; -+ - static struct sprom_fixup __initdata ar5381u_fixups[] = { - { .offset = 97, .value = 0xfee5 }, - { .offset = 98, .value = 0x157c }, -@@ -2536,6 +2601,7 @@ static const struct board_info __initcon - #endif /* CONFIG_BCM63XX_CPU_6318 */ - #ifdef CONFIG_BCM63XX_CPU_6328 - &board_96328avng, -+ &board_AD1018, - &board_AR5381u, - &board_AR5387un, - &board_963281TAN, -@@ -2646,6 +2712,8 @@ static struct of_device_id const bcm963x - { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, }, - { .compatible = "nucom,r5010un-v2", .data = &board_R5010UNV2, }, - { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, }, -+ { .compatible = "sercomm,ad1018", .data = &board_AD1018, }, -+ { .compatible = "sercomm,ad1018-nor", .data = &board_AD1018, }, - #endif /* CONFIG_BCM63XX_CPU_6328 */ - #ifdef CONFIG_BCM63XX_CPU_6338 - { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, }, diff --git a/target/linux/bcm63xx/patches-5.4/562-board_bcm6348-t-com-speedport-w-500v.patch b/target/linux/bcm63xx/patches-5.4/562-board_bcm6348-t-com-speedport-w-500v.patch new file mode 100644 index 0000000000..a20047d3d3 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/562-board_bcm6348-t-com-speedport-w-500v.patch @@ -0,0 +1,55 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1108,6 +1108,36 @@ static struct board_info __initdata boar + .force_duplex_full = 1, + }, + }; ++ ++static struct sprom_fixup __initdata spw500v_fixups[] = { ++ { .offset = 46, .value = 0x3046 }, ++ { .offset = 47, .value = 0x15a7 }, ++ { .offset = 48, .value = 0xfa89 }, ++ { .offset = 49, .value = 0xfe79 }, ++ { .offset = 57, .value = 0x6a49 }, ++}; ++ ++static struct board_info __initdata board_spw500v = { ++ .name = "SPW500V", ++ .expected_cpu_id = 0x6348, ++ ++ .has_pci = 1, ++ ++ .has_enet0 = 1, ++ .enet0 = { ++ .has_phy = 1, ++ .use_internal_phy = 1, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM4318, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ .board_fixups = spw500v_fixups, ++ .num_board_fixups = ARRAY_SIZE(spw500v_fixups), ++ }, ++}; + #endif /* CONFIG_BCM63XX_CPU_6348 */ + + /* +@@ -1264,6 +1294,7 @@ static const struct board_info __initcon + &board_96348gw_a, + &board_rta1025w_16, + &board_96348_D4PW, ++ &board_spw500v, + #endif /* CONFIG_BCM63XX_CPU_6348 */ + #ifdef CONFIG_BCM63XX_CPU_6358 + &board_96358vw, +@@ -1321,6 +1352,7 @@ static struct of_device_id const bcm963x + { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, }, + { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, }, + { .compatible = "sagem,fast-2404", .data = &board_FAST2404, }, ++ { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, }, + { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, }, + { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, }, + #endif /* CONFIG_BCM63XX_CPU_6348 */ diff --git a/target/linux/bcm63xx/patches-5.4/562-board_sr102.patch b/target/linux/bcm63xx/patches-5.4/562-board_sr102.patch deleted file mode 100644 index 0912c41dd2..0000000000 --- a/target/linux/bcm63xx/patches-5.4/562-board_sr102.patch +++ /dev/null @@ -1,61 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -2583,6 +2583,42 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_BSKYB_63168 = { -+ .name = "BSKYB_63168", -+ .expected_cpu_id = 0x63268, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_63268 */ - - /* -@@ -2687,6 +2723,7 @@ static const struct board_info __initcon - &board_963268bu_p300, - &board_963269bhr, - &board_vw6339gu, -+ &board_BSKYB_63168, - #endif /* CONFIG_BCM63XX_CPU_63268 */ - }; - -@@ -2800,6 +2837,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, }, - { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, }, - { .compatible = "inteno,vg50", .data = &board_vw6339gu, }, -+ { .compatible = "sky,sr102", .data = &board_BSKYB_63168, }, - #endif /* CONFIG_BCM63XX_CPU_63268 */ - #endif /* CONFIG_OF */ - { }, diff --git a/target/linux/bcm63xx/patches-5.4/563-board-VR-3032u.patch b/target/linux/bcm63xx/patches-5.4/563-board-VR-3032u.patch deleted file mode 100644 index 8ac3f5051c..0000000000 --- a/target/linux/bcm63xx/patches-5.4/563-board-VR-3032u.patch +++ /dev/null @@ -1,60 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -2542,6 +2542,41 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_VR3032u = { -+ .name = "963168M-1841N1", -+ .expected_cpu_id = 0x63268, -+ -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "LAN2", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "LAN3", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "LAN4", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "LAN1", -+ }, -+ }, -+ }, -+}; -+ - static struct board_info __initdata board_vw6339gu = { - .name = "VW6339GU", - .expected_cpu_id = 0x63268, -@@ -2722,6 +2757,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_63268 - &board_963268bu_p300, - &board_963269bhr, -+ &board_VR3032u, - &board_vw6339gu, - &board_BSKYB_63168, - #endif /* CONFIG_BCM63XX_CPU_63268 */ -@@ -2836,6 +2872,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_63268 - { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, }, - { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, }, -+ { .compatible = "comtrend,vr-3032u", .data = &board_VR3032u, }, - { .compatible = "inteno,vg50", .data = &board_vw6339gu, }, - { .compatible = "sky,sr102", .data = &board_BSKYB_63168, }, - #endif /* CONFIG_BCM63XX_CPU_63268 */ diff --git a/target/linux/bcm63xx/patches-5.4/563-board_bcm6348-tecom-gw6000-gw6200.patch b/target/linux/bcm63xx/patches-5.4/563-board_bcm6348-tecom-gw6000-gw6200.patch new file mode 100644 index 0000000000..3d9c000803 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/563-board_bcm6348-tecom-gw6000-gw6200.patch @@ -0,0 +1,67 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1002,6 +1002,46 @@ static struct board_info __initdata boar + .has_ohci0 = 1, + }; + ++static struct board_info __initdata board_gw6200 = { ++ .name = "GW6200", ++ .expected_cpu_id = 0x6348, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ ++ .has_enet0 = 1, ++ .enet0 = { ++ .has_phy = 1, ++ .use_internal_phy = 1, ++ }, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; ++ ++static struct board_info __initdata board_gw6000 = { ++ .name = "GW6000", ++ .expected_cpu_id = 0x6348, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ ++ .has_enet0 = 1, ++ .enet0 = { ++ .has_phy = 1, ++ .use_internal_phy = 1, ++ }, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; ++ + static struct board_info __initdata board_FAST2404 = { + .name = "F@ST2404", + .expected_cpu_id = 0x6348, +@@ -1287,6 +1327,8 @@ static const struct board_info __initcon + #ifdef CONFIG_BCM63XX_CPU_6348 + &board_96348r, + &board_96348gw, ++ &board_gw6000, ++ &board_gw6200, + &board_96348gw_10, + &board_96348gw_11, + &board_FAST2404, +@@ -1353,6 +1395,8 @@ static struct of_device_id const bcm963x + { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, }, + { .compatible = "sagem,fast-2404", .data = &board_FAST2404, }, + { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, }, ++ { .compatible = "tecom,gw6000", .data = &board_gw6000, }, ++ { .compatible = "tecom,gw6200", .data = &board_gw6200, }, + { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, }, + { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, }, + #endif /* CONFIG_BCM63XX_CPU_6348 */ diff --git a/target/linux/bcm63xx/patches-5.4/564-board-DGND3700v2.patch b/target/linux/bcm63xx/patches-5.4/564-board-DGND3700v2.patch deleted file mode 100644 index 559f00c87a..0000000000 --- a/target/linux/bcm63xx/patches-5.4/564-board-DGND3700v2.patch +++ /dev/null @@ -1,49 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1770,6 +1770,30 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_dgnd3700v2 = { -+ .name = "96362ADVN2xh", -+ .expected_cpu_id = 0x6362, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [4] = { -+ .used = 1, -+ .phy_id = 0xff, -+ .bypass_link = 1, -+ .force_speed = 1000, -+ .force_duplex_full = 1, -+ .name = "RGMII", -+ }, -+ }, -+ }, -+}; -+ - static struct board_info __initdata board_fast2504n = { - .name = "F@ST2504n", - .expected_cpu_id = 0x6362, -@@ -2736,6 +2760,7 @@ static const struct board_info __initcon - #endif /* CONFIG_BCM63XX_CPU_6358 */ - #ifdef CONFIG_BCM63XX_CPU_6362 - &board_nb6, -+ &board_dgnd3700v2, - &board_fast2504n, - #endif /* CONFIG_BCM63XX_CPU_6362 */ - #ifdef CONFIG_BCM63XX_CPU_6368 -@@ -2850,6 +2875,7 @@ static struct of_device_id const bcm963x - { .compatible = "bt,home-hub-2-a", .data = &board_homehub2a, }, - #endif /* CONFIG_BCM63XX_CPU_6358 */ - #ifdef CONFIG_BCM63XX_CPU_6362 -+ { .compatible = "netgear,dgnd3700-v2", .data = &board_dgnd3700v2, }, - { .compatible = "sagem,fast-2504n", .data = &board_fast2504n, }, - { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, }, - #endif /* CONFIG_BCM63XX_CPU_6362 */ diff --git a/target/linux/bcm63xx/patches-5.4/564-board-bcm6348-telsey-magic.patch b/target/linux/bcm63xx/patches-5.4/564-board-bcm6348-telsey-magic.patch new file mode 100644 index 0000000000..ba9ee0b4d4 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/564-board-bcm6348-telsey-magic.patch @@ -0,0 +1,49 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1178,6 +1178,30 @@ static struct board_info __initdata boar + .num_board_fixups = ARRAY_SIZE(spw500v_fixups), + }, + }; ++ ++static struct board_info __initdata board_96348sv = { ++ .name = "MAGIC", ++ .expected_cpu_id = 0x6348, ++ ++ .has_pccard = 1, ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ ++ .has_enet0 = 1, ++ .enet0 = { ++ .has_phy = 1, ++ .use_internal_phy = 1, ++ }, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ /* it has BP_ENET_EXTERNAL_PHY */ ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; + #endif /* CONFIG_BCM63XX_CPU_6348 */ + + /* +@@ -1337,6 +1361,7 @@ static const struct board_info __initcon + &board_rta1025w_16, + &board_96348_D4PW, + &board_spw500v, ++ &board_96348sv, + #endif /* CONFIG_BCM63XX_CPU_6348 */ + #ifdef CONFIG_BCM63XX_CPU_6358 + &board_96358vw, +@@ -1397,6 +1422,7 @@ static struct of_device_id const bcm963x + { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, }, + { .compatible = "tecom,gw6000", .data = &board_gw6000, }, + { .compatible = "tecom,gw6200", .data = &board_gw6200, }, ++ { .compatible = "telsey,magic", .data = &board_96348sv, }, + { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, }, + { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, }, + #endif /* CONFIG_BCM63XX_CPU_6348 */ diff --git a/target/linux/bcm63xx/patches-5.4/565-board-VG-8050.patch b/target/linux/bcm63xx/patches-5.4/565-board-VG-8050.patch deleted file mode 100644 index fa0cd6aef0..0000000000 --- a/target/linux/bcm63xx/patches-5.4/565-board-VG-8050.patch +++ /dev/null @@ -1,50 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -2566,6 +2566,31 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_VG8050 = { -+ .name = "963169P-1861N5", -+ .expected_cpu_id = 0x63268, -+ -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [6] = { -+ .used = 1, -+ .phy_id = 0xff, -+ .bypass_link = 1, -+ .force_speed = 1000, -+ .force_duplex_full = 1, -+ .mii_override = 1, -+ .timing_sel = 1, -+ .name = "RGMII", -+ }, -+ }, -+ }, -+}; -+ - static struct board_info __initdata board_VR3032u = { - .name = "963168M-1841N1", - .expected_cpu_id = 0x63268, -@@ -2782,6 +2807,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_63268 - &board_963268bu_p300, - &board_963269bhr, -+ &board_VG8050, - &board_VR3032u, - &board_vw6339gu, - &board_BSKYB_63168, -@@ -2898,6 +2924,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_63268 - { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, }, - { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, }, -+ { .compatible = "comtrend,vg-8050", .data = &board_VG8050, }, - { .compatible = "comtrend,vr-3032u", .data = &board_VR3032u, }, - { .compatible = "inteno,vg50", .data = &board_vw6339gu, }, - { .compatible = "sky,sr102", .data = &board_BSKYB_63168, }, diff --git a/target/linux/bcm63xx/patches-5.4/565-board_bcm6348-bt-voyager-2500v-bb.patch b/target/linux/bcm63xx/patches-5.4/565-board_bcm6348-bt-voyager-2500v-bb.patch new file mode 100644 index 0000000000..6536e17798 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/565-board_bcm6348-bt-voyager-2500v-bb.patch @@ -0,0 +1,93 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1202,6 +1202,27 @@ static struct board_info __initdata boar + .force_duplex_full = 1, + }, + }; ++ ++static struct board_info __initdata board_V2500V_BB = { ++ .name = "V2500V_BB", ++ .expected_cpu_id = 0x6348, ++ ++ .has_pci = 1, ++ ++ .has_enet0 = 1, ++ .enet0 = { ++ .has_phy = 1, ++ .use_internal_phy = 1, ++ }, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; + #endif /* CONFIG_BCM63XX_CPU_6348 */ + + /* +@@ -1362,6 +1383,7 @@ static const struct board_info __initcon + &board_96348_D4PW, + &board_spw500v, + &board_96348sv, ++ &board_V2500V_BB, + #endif /* CONFIG_BCM63XX_CPU_6348 */ + #ifdef CONFIG_BCM63XX_CPU_6358 + &board_96358vw, +@@ -1414,6 +1436,7 @@ static struct of_device_id const bcm963x + { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, }, + { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, }, + { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, }, ++ { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, }, + { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, }, + { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, }, + { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, }, +@@ -1469,6 +1492,22 @@ void __init board_bcm963xx_init(void) + val &= MPI_CSBASE_BASE_MASK; + } + boot_addr = (u8 *)KSEG1ADDR(val); ++ pr_info("Boot address 0x%08x\n",(unsigned int)boot_addr); ++ ++ /* BT Voyager 2500V (RTA1046VW PCB) has 8 Meg flash used as two */ ++ /* banks of 4 Meg. The byte at 0xBF800000 identifies the back to use.*/ ++ /* Loading firmware from the CFE Prompt always loads to Bank 0 */ ++ /* Do an early check of CFE and then select bank 0 */ ++ ++ if (boot_addr == (u8 *)0xbf800000) { ++ u8 *tmp_boot_addr = (u8*)0xbfc00000; ++ ++ bcm63xx_nvram_init(tmp_boot_addr + BCM963XX_NVRAM_OFFSET); ++ if (!strcmp(bcm63xx_nvram_get_name(), "V2500V_BB")) { ++ pr_info("V2500V: nvram bank 0\n"); ++ boot_addr = tmp_boot_addr; ++ } ++ } + + /* dump cfe version */ + cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET; +--- a/arch/mips/bcm63xx/dev-flash.c ++++ b/arch/mips/bcm63xx/dev-flash.c +@@ -21,6 +21,7 @@ + #include + #include + ++#include + #include + #include + #include +@@ -256,6 +257,13 @@ int __init bcm63xx_flash_register(void) + val = bcm_mpi_readl(MPI_CSBASE_REG(0)); + val &= MPI_CSBASE_BASE_MASK; + ++ /* BT Voyager 2500V has 8 Meg flash in two 4 Meg banks */ ++ /* Loading from CFE always uses Bank 0 */ ++ if (!strcmp(board_get_name(), "V2500V_BB")) { ++ pr_info("V2500V: Start in Bank 0\n"); ++ val = val + 0x400000; // Select Bank 0 start address ++ } ++ + mtd_resources[0].start = val; + mtd_resources[0].end = 0x1FFFFFFF; + } diff --git a/target/linux/bcm63xx/patches-5.4/566-board-HG253s-v2.patch b/target/linux/bcm63xx/patches-5.4/566-board-HG253s-v2.patch deleted file mode 100644 index 10414fe41c..0000000000 --- a/target/linux/bcm63xx/patches-5.4/566-board-HG253s-v2.patch +++ /dev/null @@ -1,56 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1824,6 +1824,37 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_hg253s_v2 = { -+ .name = "hg253s", -+ .expected_cpu_id = 0x6362, -+ -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [4] = { -+ .used = 1, -+ .phy_id = 0xff, -+ .bypass_link = 1, -+ .force_speed = 1000, -+ .force_duplex_full = 1, -+ .timing_sel = 1, -+ .name = "RGMII", -+ }, -+ -+ [5] = { -+ .used = 1, -+ .phy_id = 24, -+ .timing_sel = 1, -+ .name = "WAN", -+ }, -+ }, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6362 */ - - /* -@@ -2787,6 +2818,7 @@ static const struct board_info __initcon - &board_nb6, - &board_dgnd3700v2, - &board_fast2504n, -+ &board_hg253s_v2, - #endif /* CONFIG_BCM63XX_CPU_6362 */ - #ifdef CONFIG_BCM63XX_CPU_6368 - &board_AV4202N, -@@ -2901,6 +2933,7 @@ static struct of_device_id const bcm963x - { .compatible = "bt,home-hub-2-a", .data = &board_homehub2a, }, - #endif /* CONFIG_BCM63XX_CPU_6358 */ - #ifdef CONFIG_BCM63XX_CPU_6362 -+ { .compatible = "huawei,hg253s-v2", .data = &board_hg253s_v2, }, - { .compatible = "netgear,dgnd3700-v2", .data = &board_dgnd3700v2, }, - { .compatible = "sagem,fast-2504n", .data = &board_fast2504n, }, - { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, }, diff --git a/target/linux/bcm63xx/patches-5.4/566-board_bcm6348-bt-voyager-2110.patch b/target/linux/bcm63xx/patches-5.4/566-board_bcm6348-bt-voyager-2110.patch new file mode 100644 index 0000000000..c51b28854b --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/566-board_bcm6348-bt-voyager-2110.patch @@ -0,0 +1,41 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -979,6 +979,22 @@ static struct board_info __initdata boar + .has_ehci0 = 1, + }; + ++/* BT Voyager 2110 */ ++static struct board_info __initdata board_V2110 = { ++ .name = "V2110", ++ .expected_cpu_id = 0x6348, ++ ++ .has_pci = 1, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; ++ + static struct board_info __initdata board_96348gw = { + .name = "96348GW", + .expected_cpu_id = 0x6348, +@@ -1384,6 +1400,7 @@ static const struct board_info __initcon + &board_spw500v, + &board_96348sv, + &board_V2500V_BB, ++ &board_V2110, + #endif /* CONFIG_BCM63XX_CPU_6348 */ + #ifdef CONFIG_BCM63XX_CPU_6358 + &board_96358vw, +@@ -1436,6 +1453,7 @@ static struct of_device_id const bcm963x + { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, }, + { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, }, + { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, }, ++ { .compatible = "bt,voyager-2110", .data = &board_V2110, }, + { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, }, + { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, }, + { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, }, diff --git a/target/linux/bcm63xx/patches-5.4/567-MIPS-BCM63XX-add-inventel-Livebox-support.patch b/target/linux/bcm63xx/patches-5.4/567-MIPS-BCM63XX-add-inventel-Livebox-support.patch new file mode 100644 index 0000000000..0035cee7e9 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/567-MIPS-BCM63XX-add-inventel-Livebox-support.patch @@ -0,0 +1,214 @@ +From e796582b499f0ba6acaa1ac3a10c09cceaab7702 Mon Sep 17 00:00:00 2001 +From: Jonas Gorski +Date: Sun, 9 Mar 2014 04:55:52 +0100 +Subject: [PATCH] MIPS: BCM63XX: add inventel Livebox support + +--- + arch/mips/bcm63xx/boards/Kconfig | 6 + + arch/mips/bcm63xx/boards/Makefile | 1 + + arch/mips/bcm63xx/boards/board_common.c | 2 +- + arch/mips/bcm63xx/boards/board_common.h | 6 + + arch/mips/bcm63xx/boards/board_livebox.c | 215 ++++++++++++++++++++++++++++++ + 5 files changed, 229 insertions(+), 1 deletion(-) + create mode 100644 arch/mips/bcm63xx/boards/board_livebox.c + +--- a/arch/mips/bcm63xx/boards/Kconfig ++++ b/arch/mips/bcm63xx/boards/Kconfig +@@ -12,4 +12,10 @@ config BOARD_BCM963XX + select BCMA + default y + ++config BOARD_LIVEBOX ++ bool "Inventel Livebox(es) boards" ++ select SSB ++ help ++ Inventel Livebox boards using the RedBoot bootloader. ++ + endmenu +--- a/arch/mips/bcm63xx/boards/Makefile ++++ b/arch/mips/bcm63xx/boards/Makefile +@@ -1,3 +1,4 @@ + # SPDX-License-Identifier: GPL-2.0-only + obj-y += board_common.o + obj-$(CONFIG_BOARD_BCM963XX) += board_bcm963xx.o ++obj-$(CONFIG_BOARD_LIVEBOX) += board_livebox.o +--- a/arch/mips/bcm63xx/boards/board_common.c ++++ b/arch/mips/bcm63xx/boards/board_common.c +@@ -54,7 +54,7 @@ void __init board_prom_init(void) + if (fw_arg3 == CFE_EPTSEAL) + board_bcm963xx_init(); + else +- panic("unsupported bootloader detected"); ++ board_livebox_init(); + } + + static int (*board_get_mac_address)(u8 mac[ETH_ALEN]); +--- a/arch/mips/bcm63xx/boards/board_common.h ++++ b/arch/mips/bcm63xx/boards/board_common.h +@@ -24,4 +24,10 @@ static inline void board_of_device_prese + } + #endif + ++#if defined(CONFIG_BOARD_LIVEBOX) ++void board_livebox_init(void); ++#else ++static inline void board_livebox_init(void) { } ++#endif ++ + #endif /* __BOARD_COMMON_H */ +--- /dev/null ++++ b/arch/mips/bcm63xx/boards/board_livebox.c +@@ -0,0 +1,153 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright (C) 2008 Florian Fainelli ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "board_common.h" ++ ++#define PFX "board_livebox: " ++ ++static unsigned int mac_addr_used = 0; ++ ++/* ++ * known 6348 boards ++ */ ++#ifdef CONFIG_BCM63XX_CPU_6348 ++static struct board_info __initdata board_livebox_blue5g = { ++ .name = "Livebox-blue-5g", ++ .expected_cpu_id = 0x6348, ++ ++ .has_pccard = 1, ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .ephy_reset_gpio = 6, ++ .ephy_reset_gpio_flags = GPIO_ACTIVE_LOW, ++ ++ .has_enet0 = 1, ++ .enet0 = { ++ .has_phy = 1, ++ .use_internal_phy = 1, ++ }, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 31, ++ }, ++}; ++#endif ++ ++/* ++ * all boards ++ */ ++static const struct board_info __initdata *bcm963xx_boards[] = { ++#ifdef CONFIG_BCM63XX_CPU_6348 ++ &board_livebox_blue5g ++#endif /* CONFIG_BCM63XX_CPU_6348 */ ++}; ++ ++static struct of_device_id const livebox_boards_dt[] = { ++ { .compatible = "inventel,livebox-1", .data = &board_livebox_blue5g, }, ++ { } ++}; ++ ++/* ++ * register & return a new board mac address ++ */ ++static int livebox_get_mac_address(u8 *mac) ++{ ++ u8 *p; ++ int count; ++ ++ memcpy(mac, (u8 *)0xBEBFF377, ETH_ALEN); ++ ++ p = mac + ETH_ALEN - 1; ++ count = mac_addr_used; ++ ++ while (count--) { ++ do { ++ (*p)++; ++ if (*p != 0) ++ break; ++ p--; ++ } while (p != mac); ++ } ++ ++ if (p == mac) { ++ printk(KERN_ERR PFX "unable to fetch mac address\n"); ++ return -ENODEV; ++ } ++ mac_addr_used++; ++ ++ return 0; ++} ++ ++/* ++ * early init callback ++ */ ++#define LIVEBOX_GPIO_DETECT_MASK 0x000000ff ++#define LIVEBOX_BOOT_ADDR 0x1e400000 ++ ++#define LIVEBOX_HW_BLUE5G_9 0x90 ++ ++void __init board_livebox_init(void) ++{ ++ u32 val; ++ u8 hw_version; ++ const struct board_info *board; ++ const struct of_device_id *board_match; ++ ++ /* find board by compat */ ++ board_match = bcm63xx_match_board(livebox_boards_dt); ++ if (board_match) { ++ board = board_match->data; ++ } else { ++ /* Get hardware version */ ++ val = bcm_gpio_readl(GPIO_CTL_LO_REG); ++ val &= ~LIVEBOX_GPIO_DETECT_MASK; ++ bcm_gpio_writel(val, GPIO_CTL_LO_REG); ++ ++ hw_version = bcm_gpio_readl(GPIO_DATA_LO_REG); ++ hw_version &= LIVEBOX_GPIO_DETECT_MASK; ++ ++ switch (hw_version) { ++ case LIVEBOX_HW_BLUE5G_9: ++ printk(KERN_INFO PFX "Livebox BLUE5G.9\n"); ++ board = bcm963xx_boards[0]; ++ break; ++ default: ++ printk(KERN_INFO PFX "Unknown livebox version: %02x\n", ++ hw_version); ++ /* use default livebox configuration */ ++ board = bcm963xx_boards[0]; ++ break; ++ } ++ } ++ ++ /* use default livebox configuration */ ++ board_early_setup(board, livebox_get_mac_address); ++ ++ /* read base address of boot chip select (0) */ ++ val = bcm_mpi_readl(MPI_CSBASE_REG(0)); ++ val &= MPI_CSBASE_BASE_MASK; ++ if (val != LIVEBOX_BOOT_ADDR) { ++ printk(KERN_NOTICE PFX "flash address is: 0x%08x, forcing to: 0x%08x\n", ++ val, LIVEBOX_BOOT_ADDR); ++ bcm63xx_flash_force_phys_base_address(LIVEBOX_BOOT_ADDR, 0x1ebfffff); ++ } ++} diff --git a/target/linux/bcm63xx/patches-5.4/567-board-adb_pdg-a4001n-a-000-1a1-ax.patch b/target/linux/bcm63xx/patches-5.4/567-board-adb_pdg-a4001n-a-000-1a1-ax.patch deleted file mode 100644 index dec14545fe..0000000000 --- a/target/linux/bcm63xx/patches-5.4/567-board-adb_pdg-a4001n-a-000-1a1-ax.patch +++ /dev/null @@ -1,68 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -619,6 +619,49 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_PDG_A4001N_A_000_1A1_AX = { -+ .name = "96328avng", -+ .expected_cpu_id = 0x6328, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM43225, -+ .pci_bus = 1, -+ .pci_dev = 0, -+ }, -+}; -+ - static struct board_info __initdata board_A4001N1 = { - .name = "963281T_TEF", - .expected_cpu_id = 0x6328, -@@ -2757,6 +2800,7 @@ static const struct board_info __initcon - &board_AR5387un, - &board_963281TAN, - &board_A4001N, -+ &board_PDG_A4001N_A_000_1A1_AX, - &board_A4001N1, - &board_dsl_274xb_f1, - &board_FAST2704V2, -@@ -2861,6 +2905,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_6328 - { .compatible = "adb,a4001n", .data = &board_A4001N, }, - { .compatible = "adb,a4001n1", .data = &board_A4001N1, }, -+ { .compatible = "adb,pdg-a4001n-a-000-1a1-ax", .data = &board_PDG_A4001N_A_000_1A1_AX, }, - { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, }, - { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, - { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, }, diff --git a/target/linux/bcm63xx/patches-5.4/568-board-H500s.patch b/target/linux/bcm63xx/patches-5.4/568-board-H500s.patch deleted file mode 100644 index 5bcb50672d..0000000000 --- a/target/linux/bcm63xx/patches-5.4/568-board-H500s.patch +++ /dev/null @@ -1,56 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -2777,6 +2777,36 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_H500s = { -+ .name = "BXK00C-1.6", -+ .expected_cpu_id = 0x63268, -+ -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [3] = { -+ .used = 1, -+ .phy_id = 12, -+ .name = "WAN", -+ }, -+ [4] = { -+ .used = 1, -+ .phy_id = 0, -+ .bypass_link = 1, -+ .force_speed = 1000, -+ .force_duplex_full = 1, -+ .mii_override = 1, -+ .timing_sel = 1, -+ .name = "RGMII", -+ }, -+ }, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_63268 */ - - /* -@@ -2887,6 +2917,7 @@ static const struct board_info __initcon - &board_VR3032u, - &board_vw6339gu, - &board_BSKYB_63168, -+ &board_H500s, - #endif /* CONFIG_BCM63XX_CPU_63268 */ - }; - -@@ -3005,6 +3036,8 @@ static struct of_device_id const bcm963x - { .compatible = "comtrend,vg-8050", .data = &board_VG8050, }, - { .compatible = "comtrend,vr-3032u", .data = &board_VR3032u, }, - { .compatible = "inteno,vg50", .data = &board_vw6339gu, }, -+ { .compatible = "sercomm,h500-s-lowi", .data = &board_H500s, }, -+ { .compatible = "sercomm,h500-s-vfes", .data = &board_H500s, }, - { .compatible = "sky,sr102", .data = &board_BSKYB_63168, }, - #endif /* CONFIG_BCM63XX_CPU_63268 */ - #endif /* CONFIG_OF */ diff --git a/target/linux/bcm63xx/patches-5.4/568-board_bcm6348-comtrend-ct-536plus-ct-5621.patch b/target/linux/bcm63xx/patches-5.4/568-board_bcm6348-comtrend-ct-536plus-ct-5621.patch new file mode 100644 index 0000000000..c815e66f1d --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/568-board_bcm6348-comtrend-ct-536plus-ct-5621.patch @@ -0,0 +1,50 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -995,6 +995,30 @@ static struct board_info __initdata boar + }, + }; + ++static struct board_info __initdata board_ct536_ct5621 = { ++ .name = "CT536_CT5621", ++ .expected_cpu_id = 0x6348, ++ ++ .has_pccard = 1, ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM4318, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ }, ++}; ++ + static struct board_info __initdata board_96348gw = { + .name = "96348GW", + .expected_cpu_id = 0x6348, +@@ -1401,6 +1425,7 @@ static const struct board_info __initcon + &board_96348sv, + &board_V2500V_BB, + &board_V2110, ++ &board_ct536_ct5621, + #endif /* CONFIG_BCM63XX_CPU_6348 */ + #ifdef CONFIG_BCM63XX_CPU_6358 + &board_96358vw, +@@ -1455,6 +1480,8 @@ static struct of_device_id const bcm963x + { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, }, + { .compatible = "bt,voyager-2110", .data = &board_V2110, }, + { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, }, ++ { .compatible = "comtrend,ct-536plus", .data = &board_ct536_ct5621, }, ++ { .compatible = "comtrend,ct-5621", .data = &board_ct536_ct5621, }, + { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, }, + { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, }, + { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, }, diff --git a/target/linux/bcm63xx/patches-5.4/569-board_bcm6348-comtrend-ct-5365.patch b/target/linux/bcm63xx/patches-5.4/569-board_bcm6348-comtrend-ct-5365.patch new file mode 100644 index 0000000000..7dbfb825fa --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/569-board_bcm6348-comtrend-ct-5365.patch @@ -0,0 +1,48 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1019,6 +1019,29 @@ static struct board_info __initdata boar + }, + }; + ++static struct board_info __initdata board_96348A_122 = { ++ .name = "96348A-122", ++ .expected_cpu_id = 0x6348, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM4318, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ }, ++}; ++ + static struct board_info __initdata board_96348gw = { + .name = "96348GW", + .expected_cpu_id = 0x6348, +@@ -1426,6 +1449,7 @@ static const struct board_info __initcon + &board_V2500V_BB, + &board_V2110, + &board_ct536_ct5621, ++ &board_96348A_122, + #endif /* CONFIG_BCM63XX_CPU_6348 */ + #ifdef CONFIG_BCM63XX_CPU_6358 + &board_96358vw, +@@ -1481,6 +1505,7 @@ static struct of_device_id const bcm963x + { .compatible = "bt,voyager-2110", .data = &board_V2110, }, + { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, }, + { .compatible = "comtrend,ct-536plus", .data = &board_ct536_ct5621, }, ++ { .compatible = "comtrend,ct-5365", .data = &board_96348A_122, }, + { .compatible = "comtrend,ct-5621", .data = &board_ct536_ct5621, }, + { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, }, + { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, }, diff --git a/target/linux/bcm63xx/patches-5.4/570-board_bcm6348-telsey-cpva502plus.patch b/target/linux/bcm63xx/patches-5.4/570-board_bcm6348-telsey-cpva502plus.patch new file mode 100644 index 0000000000..dc028609be --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/570-board_bcm6348-telsey-cpva502plus.patch @@ -0,0 +1,53 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -995,6 +995,34 @@ static struct board_info __initdata boar + }, + }; + ++static struct board_info __initdata board_CPVA502plus = { ++ .name = "CPVA502+", ++ .expected_cpu_id = 0x6348, ++ ++ .has_pci = 1, ++ .ephy_reset_gpio = 4, ++ .ephy_reset_gpio_flags = GPIO_ACTIVE_LOW, ++ ++ .has_enet0 = 1, ++ .enet0 = { ++ .has_phy = 1, ++ .use_internal_phy = 1, ++ }, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM4318, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ }, ++}; ++ + static struct board_info __initdata board_ct536_ct5621 = { + .name = "CT536_CT5621", + .expected_cpu_id = 0x6348, +@@ -1450,6 +1478,7 @@ static const struct board_info __initcon + &board_V2110, + &board_ct536_ct5621, + &board_96348A_122, ++ &board_CPVA502plus, + #endif /* CONFIG_BCM63XX_CPU_6348 */ + #ifdef CONFIG_BCM63XX_CPU_6358 + &board_96358vw, +@@ -1515,6 +1544,7 @@ static struct of_device_id const bcm963x + { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, }, + { .compatible = "tecom,gw6000", .data = &board_gw6000, }, + { .compatible = "tecom,gw6200", .data = &board_gw6200, }, ++ { .compatible = "telsey,cpva502plus", .data = &board_CPVA502plus, }, + { .compatible = "telsey,magic", .data = &board_96348sv, }, + { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, }, + { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, }, diff --git a/target/linux/bcm63xx/patches-5.4/571-board_bcm6348-netgear-dg834g-v4.patch b/target/linux/bcm63xx/patches-5.4/571-board_bcm6348-netgear-dg834g-v4.patch new file mode 100644 index 0000000000..d68f690578 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/571-board_bcm6348-netgear-dg834g-v4.patch @@ -0,0 +1,42 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1225,6 +1225,23 @@ static struct board_info __initdata boar + .has_ohci0 = 1, + }; + ++/* NetGear DG834G v4 */ ++static struct board_info __initdata board_96348W3 = { ++ .name = "96348W3", ++ .expected_cpu_id = 0x6348, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; ++ + static struct board_info __initdata board_96348_D4PW = { + .name = "D-4P-W", + .expected_cpu_id = 0x6348, +@@ -1479,6 +1496,7 @@ static const struct board_info __initcon + &board_ct536_ct5621, + &board_96348A_122, + &board_CPVA502plus, ++ &board_96348W3, + #endif /* CONFIG_BCM63XX_CPU_6348 */ + #ifdef CONFIG_BCM63XX_CPU_6358 + &board_96358vw, +@@ -1540,6 +1558,7 @@ static struct of_device_id const bcm963x + { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, }, + { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, }, + { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, }, ++ { .compatible = "netgear,dg834g-v4", .data = &board_96348W3, }, + { .compatible = "sagem,fast-2404", .data = &board_FAST2404, }, + { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, }, + { .compatible = "tecom,gw6000", .data = &board_gw6000, }, diff --git a/target/linux/bcm63xx/patches-5.4/572-board_bcm6348-sagem-fast-2604.patch b/target/linux/bcm63xx/patches-5.4/572-board_bcm6348-sagem-fast-2604.patch new file mode 100644 index 0000000000..21b10da89f --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/572-board_bcm6348-sagem-fast-2604.patch @@ -0,0 +1,41 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1159,6 +1159,22 @@ static struct board_info __initdata boar + .has_ehci0 = 1, + }; + ++static struct board_info __initdata board_FAST2604 = { ++ .name = "F@ST2604", ++ .expected_cpu_id = 0x6348, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; ++ + static struct board_info __initdata board_rta1025w_16 = { + .name = "RTA1025W_16", + .expected_cpu_id = 0x6348, +@@ -1485,6 +1501,7 @@ static const struct board_info __initcon + &board_96348gw_10, + &board_96348gw_11, + &board_FAST2404, ++ &board_FAST2604, + &board_DV201AMR, + &board_96348gw_a, + &board_rta1025w_16, +@@ -1560,6 +1577,7 @@ static struct of_device_id const bcm963x + { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, }, + { .compatible = "netgear,dg834g-v4", .data = &board_96348W3, }, + { .compatible = "sagem,fast-2404", .data = &board_FAST2404, }, ++ { .compatible = "sagem,fast-2604", .data = &board_FAST2604, }, + { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, }, + { .compatible = "tecom,gw6000", .data = &board_gw6000, }, + { .compatible = "tecom,gw6200", .data = &board_gw6200, }, diff --git a/target/linux/bcm63xx/patches-5.4/573-board_bcm6348-asmax-ar-1004g.patch b/target/linux/bcm63xx/patches-5.4/573-board_bcm6348-asmax-ar-1004g.patch new file mode 100644 index 0000000000..a1eeee3b22 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/573-board_bcm6348-asmax-ar-1004g.patch @@ -0,0 +1,48 @@ +From: "mexit@o2.pl" +Date: Sun, 24 Nov 2013 21:33:38 +0000 +Subject: [PATCH 4/5] bcm63xx: add support for Asmax AR 1004g router + +Support for Asmax AR 1004g router + +Signed-off-by: Adrian Feliks +--- +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -979,6 +979,21 @@ static struct board_info __initdata boar + .has_ehci0 = 1, + }; + ++static struct board_info __initdata board_96348gw_10_AR1004G = { ++ .name = "AR1004G", ++ .expected_cpu_id = 0x6348, ++ ++ .has_pci = 1, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; ++ + /* BT Voyager 2110 */ + static struct board_info __initdata board_V2110 = { + .name = "V2110", +@@ -1514,6 +1529,7 @@ static const struct board_info __initcon + &board_96348A_122, + &board_CPVA502plus, + &board_96348W3, ++ &board_96348gw_10_AR1004G, + #endif /* CONFIG_BCM63XX_CPU_6348 */ + #ifdef CONFIG_BCM63XX_CPU_6358 + &board_96358vw, +@@ -1561,6 +1577,7 @@ static struct of_device_id const bcm963x + { .compatible = "dynalink,rta770w", .data = &board_rta770w, }, + #endif /* CONFIG_BCM63XX_CPU_6345 */ + #ifdef CONFIG_BCM63XX_CPU_6348 ++ { .compatible = "asmax,ar-1004g", .data = &board_96348gw_10_AR1004G, }, + { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, }, + { .compatible = "brcm,bcm96348r", .data = &board_96348r, }, + { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, }, diff --git a/target/linux/bcm63xx/patches-5.4/601-board-bcm6358-DWV-S0_fixes.patch b/target/linux/bcm63xx/patches-5.4/601-board-bcm6358-DWV-S0_fixes.patch new file mode 100644 index 0000000000..fa35102aa0 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/601-board-bcm6358-DWV-S0_fixes.patch @@ -0,0 +1,10 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1468,6 +1468,7 @@ static struct board_info __initdata boar + }, + + .has_ohci0 = 1, ++ .has_ehci0 = 1, + }; + #endif /* CONFIG_BCM63XX_CPU_6358 */ + diff --git a/target/linux/bcm63xx/patches-5.4/602-board-bcm6358-sfr-neufbox-4.patch b/target/linux/bcm63xx/patches-5.4/602-board-bcm6358-sfr-neufbox-4.patch new file mode 100644 index 0000000000..bb5ce6f840 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/602-board-bcm6358-sfr-neufbox-4.patch @@ -0,0 +1,77 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1470,6 +1470,56 @@ static struct board_info __initdata boar + .has_ohci0 = 1, + .has_ehci0 = 1, + }; ++ ++static struct board_info __initdata board_nb4_ser_r0 = { ++ .name = "NB4-SER-r0", ++ .expected_cpu_id = 0x6358, ++ ++ .has_pccard = 1, ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_enet0 = 1, ++ .enet0 = { ++ .has_phy = 1, ++ .use_internal_phy = 1, ++ }, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; ++ ++static struct board_info __initdata board_nb4_fxc_r1 = { ++ .name = "NB4-FXC-r1", ++ .expected_cpu_id = 0x6358, ++ ++ .has_pccard = 1, ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_enet0 = 1, ++ .enet0 = { ++ .has_phy = 1, ++ .use_internal_phy = 1, ++ }, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; + #endif /* CONFIG_BCM63XX_CPU_6358 */ + + /* +@@ -1537,6 +1587,8 @@ static const struct board_info __initcon + &board_96358vw2, + &board_AGPFS0, + &board_DWVS0, ++ &board_nb4_ser_r0, ++ &board_nb4_fxc_r1, + #endif /* CONFIG_BCM63XX_CPU_6358 */ + }; + +@@ -1613,6 +1665,8 @@ static struct of_device_id const bcm963x + { .compatible = "pirelli,a226m", .data = &board_DWVS0, }, + { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, }, + { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, }, ++ { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, }, ++ { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, }, + #endif /* CONFIG_BCM63XX_CPU_6358 */ + #ifdef CONFIG_BCM63XX_CPU_6362 + #endif /* CONFIG_BCM63XX_CPU_6362 */ diff --git a/target/linux/bcm63xx/patches-5.4/603-board-bcm6358-telsey-cpva642.patch b/target/linux/bcm63xx/patches-5.4/603-board-bcm6358-telsey-cpva642.patch new file mode 100644 index 0000000000..be860fa722 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/603-board-bcm6358-telsey-cpva642.patch @@ -0,0 +1,42 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1422,6 +1422,23 @@ static struct board_info __initdata boar + .num_usbh_ports = 2, + }; + ++static struct board_info __initdata board_CPVA642 = { ++ .name = "CPVA642", ++ .expected_cpu_id = 0x6358, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; ++ + static struct board_info __initdata board_AGPFS0 = { + .name = "AGPF-S0", + .expected_cpu_id = 0x6358, +@@ -1586,6 +1603,7 @@ static const struct board_info __initcon + &board_96358vw, + &board_96358vw2, + &board_AGPFS0, ++ &board_CPVA642, + &board_DWVS0, + &board_nb4_ser_r0, + &board_nb4_fxc_r1, +@@ -1667,6 +1685,7 @@ static struct of_device_id const bcm963x + { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, }, + { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, }, + { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, }, ++ { .compatible = "telsey,cpva642", .data = &board_CPVA642, }, + #endif /* CONFIG_BCM63XX_CPU_6358 */ + #ifdef CONFIG_BCM63XX_CPU_6362 + #endif /* CONFIG_BCM63XX_CPU_6362 */ diff --git a/target/linux/bcm63xx/patches-5.4/604-board_bcm6358-d-link-dsl-274xb-c.patch b/target/linux/bcm63xx/patches-5.4/604-board_bcm6358-d-link-dsl-274xb-c.patch new file mode 100644 index 0000000000..3fb9940e78 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/604-board_bcm6358-d-link-dsl-274xb-c.patch @@ -0,0 +1,41 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1488,6 +1488,22 @@ static struct board_info __initdata boar + .has_ehci0 = 1, + }; + ++/* D-Link DSL-274xB revison C2/C3 */ ++static struct board_info __initdata board_dsl_274xb_rev_c = { ++ .name = "AW4139", ++ .expected_cpu_id = 0x6358, ++ ++ .has_pci = 1, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; ++ + static struct board_info __initdata board_nb4_ser_r0 = { + .name = "NB4-SER-r0", + .expected_cpu_id = 0x6358, +@@ -1605,6 +1621,7 @@ static const struct board_info __initcon + &board_AGPFS0, + &board_CPVA642, + &board_DWVS0, ++ &board_dsl_274xb_rev_c, + &board_nb4_ser_r0, + &board_nb4_fxc_r1, + #endif /* CONFIG_BCM63XX_CPU_6358 */ +@@ -1678,6 +1695,7 @@ static struct of_device_id const bcm963x + { .compatible = "alcatel,rg100a", .data = &board_96358vw2, }, + { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, }, + { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, }, ++ { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, }, + { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, }, + { .compatible = "pirelli,a226g", .data = &board_DWVS0, }, + { .compatible = "pirelli,a226m", .data = &board_DWVS0, }, diff --git a/target/linux/bcm63xx/patches-5.4/605-board_bcm6358-huawei-echolife-hg553.patch b/target/linux/bcm63xx/patches-5.4/605-board_bcm6358-huawei-echolife-hg553.patch new file mode 100644 index 0000000000..e5eb2ff8e2 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/605-board_bcm6358-huawei-echolife-hg553.patch @@ -0,0 +1,50 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1553,6 +1553,31 @@ static struct board_info __initdata boar + .force_duplex_full = 1, + }, + }; ++ ++static struct board_info __initdata board_HW553 = { ++ .name = "HW553", ++ .expected_cpu_id = 0x6358, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM4318, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ }, ++}; + #endif /* CONFIG_BCM63XX_CPU_6358 */ + + /* +@@ -1624,6 +1649,7 @@ static const struct board_info __initcon + &board_dsl_274xb_rev_c, + &board_nb4_ser_r0, + &board_nb4_fxc_r1, ++ &board_HW553, + #endif /* CONFIG_BCM63XX_CPU_6358 */ + }; + +@@ -1697,6 +1723,7 @@ static struct of_device_id const bcm963x + { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, }, + { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, }, + { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, }, ++ { .compatible = "huawei,echolife-hg553", .data = &board_HW553, }, + { .compatible = "pirelli,a226g", .data = &board_DWVS0, }, + { .compatible = "pirelli,a226m", .data = &board_DWVS0, }, + { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, }, diff --git a/target/linux/bcm63xx/patches-5.4/606-board_bcm6358-t-com-speedport-w-303v.patch b/target/linux/bcm63xx/patches-5.4/606-board_bcm6358-t-com-speedport-w-303v.patch new file mode 100644 index 0000000000..114e55a14d --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/606-board_bcm6358-t-com-speedport-w-303v.patch @@ -0,0 +1,39 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1578,6 +1578,20 @@ static struct board_info __initdata boar + .pci_dev = 1, + }, + }; ++ ++ /* T-Home Speedport W 303V Typ B */ ++static struct board_info __initdata board_spw303v = { ++ .name = "96358-502V", ++ .expected_cpu_id = 0x6358, ++ ++ .has_pci = 1, ++ ++ .has_enet0 = 1, ++ .enet0 = { ++ .has_phy = 1, ++ .use_internal_phy = 1, ++ }, ++}; + #endif /* CONFIG_BCM63XX_CPU_6358 */ + + /* +@@ -1650,6 +1664,7 @@ static const struct board_info __initcon + &board_nb4_ser_r0, + &board_nb4_fxc_r1, + &board_HW553, ++ &board_spw303v, + #endif /* CONFIG_BCM63XX_CPU_6358 */ + }; + +@@ -1730,6 +1745,7 @@ static struct of_device_id const bcm963x + { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, }, + { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, }, + { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, }, ++ { .compatible = "t-com,speedport-w-303v", .data = &board_spw303v, }, + { .compatible = "telsey,cpva642", .data = &board_CPVA642, }, + #endif /* CONFIG_BCM63XX_CPU_6358 */ + #ifdef CONFIG_BCM63XX_CPU_6362 diff --git a/target/linux/bcm63xx/patches-5.4/607-board_bcm6358-comtrend-ct-6373.patch b/target/linux/bcm63xx/patches-5.4/607-board_bcm6358-comtrend-ct-6373.patch new file mode 100644 index 0000000000..4c0ff79067 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/607-board_bcm6358-comtrend-ct-6373.patch @@ -0,0 +1,49 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1554,6 +1554,30 @@ static struct board_info __initdata boar + }, + }; + ++static struct board_info __initdata board_ct6373_1 = { ++ .name = "CT6373-1", ++ .expected_cpu_id = 0x6358, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM4318, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ }, ++}; ++ + static struct board_info __initdata board_HW553 = { + .name = "HW553", + .expected_cpu_id = 0x6358, +@@ -1663,6 +1687,7 @@ static const struct board_info __initcon + &board_dsl_274xb_rev_c, + &board_nb4_ser_r0, + &board_nb4_fxc_r1, ++ &board_ct6373_1, + &board_HW553, + &board_spw303v, + #endif /* CONFIG_BCM63XX_CPU_6358 */ +@@ -1736,6 +1761,7 @@ static struct of_device_id const bcm963x + { .compatible = "alcatel,rg100a", .data = &board_96358vw2, }, + { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, }, + { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, }, ++ { .compatible = "comtrend,ct-6373", .data = &board_ct6373_1, }, + { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, }, + { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, }, + { .compatible = "huawei,echolife-hg553", .data = &board_HW553, }, diff --git a/target/linux/bcm63xx/patches-5.4/608-board_bcm6358-d-link-dva-g3810bn-tl.patch b/target/linux/bcm63xx/patches-5.4/608-board_bcm6358-d-link-dva-g3810bn-tl.patch new file mode 100644 index 0000000000..a106ab8447 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/608-board_bcm6358-d-link-dva-g3810bn-tl.patch @@ -0,0 +1,50 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1616,6 +1616,31 @@ static struct board_info __initdata boar + .use_internal_phy = 1, + }, + }; ++ ++/* D-Link DVA-G3810BN/TL */ ++static struct board_info __initdata board_DVAG3810BN = { ++ .name = "DVAG3810BN", ++ .expected_cpu_id = 0x6358, ++ ++ .has_pccard = 1, ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ ++ .has_enet0 = 1, ++ .enet0 = { ++ .has_phy = 1, ++ .use_internal_phy = 1, ++ }, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; + #endif /* CONFIG_BCM63XX_CPU_6358 */ + + /* +@@ -1690,6 +1715,7 @@ static const struct board_info __initcon + &board_ct6373_1, + &board_HW553, + &board_spw303v, ++ &board_DVAG3810BN, + #endif /* CONFIG_BCM63XX_CPU_6358 */ + }; + +@@ -1764,6 +1790,7 @@ static struct of_device_id const bcm963x + { .compatible = "comtrend,ct-6373", .data = &board_ct6373_1, }, + { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, }, + { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, }, ++ { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, }, + { .compatible = "huawei,echolife-hg553", .data = &board_HW553, }, + { .compatible = "pirelli,a226g", .data = &board_DWVS0, }, + { .compatible = "pirelli,a226m", .data = &board_DWVS0, }, diff --git a/target/linux/bcm63xx/patches-5.4/609-board_bcm6358-huawei-echolife-hg556.patch b/target/linux/bcm63xx/patches-5.4/609-board_bcm6358-huawei-echolife-hg556.patch new file mode 100644 index 0000000000..d05e6ca985 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/609-board_bcm6358-huawei-echolife-hg556.patch @@ -0,0 +1,125 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -12,6 +12,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -1603,6 +1604,94 @@ static struct board_info __initdata boar + }, + }; + ++static struct board_info __initdata board_HW556_A = { ++ .name = "HW556_A", ++ .expected_cpu_id = 0x6358, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_caldata = 1, ++ .caldata = { ++ { ++ .vendor = PCI_VENDOR_ID_ATHEROS, ++ .caldata_offset = 0xf7e000, ++ .slot = 1, ++ .endian_check = 1, ++ .led_pin = 2, ++ .led_active_high = 1, ++ }, ++ }, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; ++ ++static struct board_info __initdata board_HW556_B = { ++ .name = "HW556_B", ++ .expected_cpu_id = 0x6358, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_caldata = 1, ++ .caldata = { ++ { ++ .vendor = PCI_VENDOR_ID_ATHEROS, ++ .caldata_offset = 0xefe000, ++ .slot = 1, ++ .endian_check = 1, ++ .led_pin = 2, ++ .led_active_high = 1, ++ }, ++ }, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; ++ ++static struct board_info __initdata board_HW556_C = { ++ .name = "HW556_C", ++ .expected_cpu_id = 0x6358, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_caldata = 1, ++ .caldata = { ++ { ++ .vendor = PCI_VENDOR_ID_RALINK, ++ .caldata_offset = 0xeffe00, ++ .slot = 1, ++ .eeprom = "rt2x00.eeprom", ++ }, ++ }, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; ++ + /* T-Home Speedport W 303V Typ B */ + static struct board_info __initdata board_spw303v = { + .name = "96358-502V", +@@ -1714,6 +1803,9 @@ static const struct board_info __initcon + &board_nb4_fxc_r1, + &board_ct6373_1, + &board_HW553, ++ &board_HW556_A, ++ &board_HW556_B, ++ &board_HW556_C, + &board_spw303v, + &board_DVAG3810BN, + #endif /* CONFIG_BCM63XX_CPU_6358 */ +@@ -1792,6 +1884,9 @@ static struct of_device_id const bcm963x + { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, }, + { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, }, + { .compatible = "huawei,echolife-hg553", .data = &board_HW553, }, ++ { .compatible = "huawei,echolife-hg556a-a", .data = &board_HW556_A, }, ++ { .compatible = "huawei,echolife-hg556a-b", .data = &board_HW556_B, }, ++ { .compatible = "huawei,echolife-hg556a-c", .data = &board_HW556_C, }, + { .compatible = "pirelli,a226g", .data = &board_DWVS0, }, + { .compatible = "pirelli,a226m", .data = &board_DWVS0, }, + { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, }, diff --git a/target/linux/bcm63xx/patches-5.4/610-board_bcm6359-huawei-echolife-hg520v.patch b/target/linux/bcm63xx/patches-5.4/610-board_bcm6359-huawei-echolife-hg520v.patch new file mode 100644 index 0000000000..ff31e2973a --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/610-board_bcm6359-huawei-echolife-hg520v.patch @@ -0,0 +1,55 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1579,6 +1579,36 @@ static struct board_info __initdata boar + }, + }; + ++static struct board_info __initdata board_HW520 = { ++ .name = "HW6358GW_B", ++ .expected_cpu_id = 0x6358, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ ++ .has_enet0 = 1, ++ .enet0 = { ++ .has_phy = 1, ++ .use_internal_phy = 1, ++ }, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM4318, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ }, ++}; ++ + static struct board_info __initdata board_HW553 = { + .name = "HW553", + .expected_cpu_id = 0x6358, +@@ -1802,6 +1832,7 @@ static const struct board_info __initcon + &board_nb4_ser_r0, + &board_nb4_fxc_r1, + &board_ct6373_1, ++ &board_HW520, + &board_HW553, + &board_HW556_A, + &board_HW556_B, +@@ -1883,6 +1914,7 @@ static struct of_device_id const bcm963x + { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, }, + { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, }, + { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, }, ++ { .compatible = "huawei,echolife-hg520v", .data = &board_HW520, }, + { .compatible = "huawei,echolife-hg553", .data = &board_HW553, }, + { .compatible = "huawei,echolife-hg556a-a", .data = &board_HW556_A, }, + { .compatible = "huawei,echolife-hg556a-b", .data = &board_HW556_B, }, diff --git a/target/linux/bcm63xx/patches-5.4/611-board_bcm6358-bt-home-hub-2-a.patch b/target/linux/bcm63xx/patches-5.4/611-board_bcm6358-bt-home-hub-2-a.patch new file mode 100644 index 0000000000..b7caeb417b --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/611-board_bcm6358-bt-home-hub-2-a.patch @@ -0,0 +1,50 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1579,6 +1579,31 @@ static struct board_info __initdata boar + }, + }; + ++static struct board_info __initdata board_homehub2a = { ++ .name = "HOMEHUB2A", ++ .expected_cpu_id = 0x6358, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM4322, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ }, ++}; ++ + static struct board_info __initdata board_HW520 = { + .name = "HW6358GW_B", + .expected_cpu_id = 0x6358, +@@ -1832,6 +1857,7 @@ static const struct board_info __initcon + &board_nb4_ser_r0, + &board_nb4_fxc_r1, + &board_ct6373_1, ++ &board_homehub2a, + &board_HW520, + &board_HW553, + &board_HW556_A, +@@ -1927,6 +1953,7 @@ static struct of_device_id const bcm963x + { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, }, + { .compatible = "t-com,speedport-w-303v", .data = &board_spw303v, }, + { .compatible = "telsey,cpva642", .data = &board_CPVA642, }, ++ { .compatible = "bt,home-hub-2-a", .data = &board_homehub2a, }, + #endif /* CONFIG_BCM63XX_CPU_6358 */ + #ifdef CONFIG_BCM63XX_CPU_6362 + #endif /* CONFIG_BCM63XX_CPU_6362 */ diff --git a/target/linux/bcm63xx/patches-5.4/631-board_bcm6361-sfr-neufbox-6.patch b/target/linux/bcm63xx/patches-5.4/631-board_bcm6361-sfr-neufbox-6.patch new file mode 100644 index 0000000000..79e9efb2b4 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/631-board_bcm6361-sfr-neufbox-6.patch @@ -0,0 +1,52 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1787,6 +1787,31 @@ static struct board_info __initdata boar + }; + #endif /* CONFIG_BCM63XX_CPU_6358 */ + ++#ifdef CONFIG_BCM63XX_CPU_6362 ++static struct board_info __initdata board_nb6 = { ++ .name = "NB6", ++ .expected_cpu_id = 0x6362, ++ ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [4] = { ++ .used = 1, ++ .phy_id = 0xff, ++ .bypass_link = 1, ++ .force_speed = 1000, ++ .force_duplex_full = 1, ++ .name = "RGMII", ++ }, ++ }, ++ }, ++}; ++#endif /* CONFIG_BCM63XX_CPU_6362 */ ++ + /* + * all boards + */ +@@ -1866,6 +1891,9 @@ static const struct board_info __initcon + &board_spw303v, + &board_DVAG3810BN, + #endif /* CONFIG_BCM63XX_CPU_6358 */ ++#ifdef CONFIG_BCM63XX_CPU_6362 ++ &board_nb6, ++#endif /* CONFIG_BCM63XX_CPU_6362 */ + }; + + static struct of_device_id const bcm963xx_boards_dt[] = { +@@ -1956,6 +1984,7 @@ static struct of_device_id const bcm963x + { .compatible = "bt,home-hub-2-a", .data = &board_homehub2a, }, + #endif /* CONFIG_BCM63XX_CPU_6358 */ + #ifdef CONFIG_BCM63XX_CPU_6362 ++ { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, }, + #endif /* CONFIG_BCM63XX_CPU_6362 */ + #ifdef CONFIG_BCM63XX_CPU_6368 + #endif /* CONFIG_BCM63XX_CPU_6368 */ diff --git a/target/linux/bcm63xx/patches-5.4/632-board_bcm6362-sagem-fast-2504n.patch b/target/linux/bcm63xx/patches-5.4/632-board_bcm6362-sagem-fast-2504n.patch new file mode 100644 index 0000000000..3bb3ad4238 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/632-board_bcm6362-sagem-fast-2504n.patch @@ -0,0 +1,62 @@ +From: Max Staudt +Date: Wed, 15 Jan 2014 18:51:13 +0000 +Subject: [PATCH] bcm63xx: F@ST2504n board support (Linux-3.10.26) + +Signed-off-by: Max Staudt +--- +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1810,6 +1810,37 @@ static struct board_info __initdata boar + }, + }, + }; ++ ++static struct board_info __initdata board_fast2504n = { ++ .name = "F@ST2504n", ++ .expected_cpu_id = 0x6362, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 4", ++ }, ++ }, ++ }, ++}; + #endif /* CONFIG_BCM63XX_CPU_6362 */ + + /* +@@ -1893,6 +1924,7 @@ static const struct board_info __initcon + #endif /* CONFIG_BCM63XX_CPU_6358 */ + #ifdef CONFIG_BCM63XX_CPU_6362 + &board_nb6, ++ &board_fast2504n, + #endif /* CONFIG_BCM63XX_CPU_6362 */ + }; + +@@ -1984,6 +2016,7 @@ static struct of_device_id const bcm963x + { .compatible = "bt,home-hub-2-a", .data = &board_homehub2a, }, + #endif /* CONFIG_BCM63XX_CPU_6358 */ + #ifdef CONFIG_BCM63XX_CPU_6362 ++ { .compatible = "sagem,fast-2504n", .data = &board_fast2504n, }, + { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, }, + #endif /* CONFIG_BCM63XX_CPU_6362 */ + #ifdef CONFIG_BCM63XX_CPU_6368 diff --git a/target/linux/bcm63xx/patches-5.4/633-board-bcm6362-netgear-dgnd3700-v2.patch b/target/linux/bcm63xx/patches-5.4/633-board-bcm6362-netgear-dgnd3700-v2.patch new file mode 100644 index 0000000000..17beb14154 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/633-board-bcm6362-netgear-dgnd3700-v2.patch @@ -0,0 +1,49 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1811,6 +1811,30 @@ static struct board_info __initdata boar + }, + }; + ++static struct board_info __initdata board_dgnd3700v2 = { ++ .name = "96362ADVN2xh", ++ .expected_cpu_id = 0x6362, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [4] = { ++ .used = 1, ++ .phy_id = 0xff, ++ .bypass_link = 1, ++ .force_speed = 1000, ++ .force_duplex_full = 1, ++ .name = "RGMII", ++ }, ++ }, ++ }, ++}; ++ + static struct board_info __initdata board_fast2504n = { + .name = "F@ST2504n", + .expected_cpu_id = 0x6362, +@@ -1924,6 +1948,7 @@ static const struct board_info __initcon + #endif /* CONFIG_BCM63XX_CPU_6358 */ + #ifdef CONFIG_BCM63XX_CPU_6362 + &board_nb6, ++ &board_dgnd3700v2, + &board_fast2504n, + #endif /* CONFIG_BCM63XX_CPU_6362 */ + }; +@@ -2016,6 +2041,7 @@ static struct of_device_id const bcm963x + { .compatible = "bt,home-hub-2-a", .data = &board_homehub2a, }, + #endif /* CONFIG_BCM63XX_CPU_6358 */ + #ifdef CONFIG_BCM63XX_CPU_6362 ++ { .compatible = "netgear,dgnd3700-v2", .data = &board_dgnd3700v2, }, + { .compatible = "sagem,fast-2504n", .data = &board_fast2504n, }, + { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, }, + #endif /* CONFIG_BCM63XX_CPU_6362 */ diff --git a/target/linux/bcm63xx/patches-5.4/634-board-bcm6362-huawei-hg253s-v2.patch b/target/linux/bcm63xx/patches-5.4/634-board-bcm6362-huawei-hg253s-v2.patch new file mode 100644 index 0000000000..db36cf2ff4 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/634-board-bcm6362-huawei-hg253s-v2.patch @@ -0,0 +1,56 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1865,6 +1865,37 @@ static struct board_info __initdata boar + }, + }, + }; ++ ++static struct board_info __initdata board_hg253s_v2 = { ++ .name = "hg253s", ++ .expected_cpu_id = 0x6362, ++ ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [4] = { ++ .used = 1, ++ .phy_id = 0xff, ++ .bypass_link = 1, ++ .force_speed = 1000, ++ .force_duplex_full = 1, ++ .timing_sel = 1, ++ .name = "RGMII", ++ }, ++ ++ [5] = { ++ .used = 1, ++ .phy_id = 24, ++ .timing_sel = 1, ++ .name = "WAN", ++ }, ++ }, ++ }, ++}; + #endif /* CONFIG_BCM63XX_CPU_6362 */ + + /* +@@ -1950,6 +1981,7 @@ static const struct board_info __initcon + &board_nb6, + &board_dgnd3700v2, + &board_fast2504n, ++ &board_hg253s_v2, + #endif /* CONFIG_BCM63XX_CPU_6362 */ + }; + +@@ -2041,6 +2073,7 @@ static struct of_device_id const bcm963x + { .compatible = "bt,home-hub-2-a", .data = &board_homehub2a, }, + #endif /* CONFIG_BCM63XX_CPU_6358 */ + #ifdef CONFIG_BCM63XX_CPU_6362 ++ { .compatible = "huawei,hg253s-v2", .data = &board_hg253s_v2, }, + { .compatible = "netgear,dgnd3700-v2", .data = &board_dgnd3700v2, }, + { .compatible = "sagem,fast-2504n", .data = &board_fast2504n, }, + { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, }, diff --git a/target/linux/bcm63xx/patches-5.4/651-bcm63xx-add-support-for-96368MVWG-board.patch b/target/linux/bcm63xx/patches-5.4/651-bcm63xx-add-support-for-96368MVWG-board.patch new file mode 100644 index 0000000000..948d473f53 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/651-bcm63xx-add-support-for-96368MVWG-board.patch @@ -0,0 +1,111 @@ +From eeacc2529942051504bc957726aa178671344421 Mon Sep 17 00:00:00 2001 +From: Maxime Bizon +Date: Wed, 20 Jan 2010 16:21:30 +0100 +Subject: [PATCH 32/63] bcm63xx: add support for 96368MVWG board. + +--- + arch/mips/bcm63xx/boards/board_bcm963xx.c | 95 ++++++++++++++++++++ + .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h | 2 + + 2 files changed, 97 insertions(+), 0 deletions(-) + +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1899,6 +1899,52 @@ static struct board_info __initdata boar + #endif /* CONFIG_BCM63XX_CPU_6362 */ + + /* ++ * known 6368 boards ++ */ ++#ifdef CONFIG_BCM63XX_CPU_6368 ++static struct board_info __initdata board_96368mvwg = { ++ .name = "96368MVWG", ++ .expected_cpu_id = 0x6368, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ ++ .has_usbd = 1, ++ .usbd = { ++ .use_fullspeed = 0, ++ .port_no = 0, ++ }, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "port1", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "port2", ++ }, ++ [4] = { ++ .used = 1, ++ .phy_id = 0x12, ++ .name = "port0", ++ }, ++ [5] = { ++ .used = 1, ++ .phy_id = 0x11, ++ .name = "port3", ++ }, ++ }, ++ }, ++}; ++#endif /* CONFIG_BCM63XX_CPU_6368 */ ++ ++/* + * all boards + */ + static const struct board_info __initconst *bcm963xx_boards[] = { +@@ -1983,6 +2029,9 @@ static const struct board_info __initcon + &board_fast2504n, + &board_hg253s_v2, + #endif /* CONFIG_BCM63XX_CPU_6362 */ ++#ifdef CONFIG_BCM63XX_CPU_6368 ++ &board_96368mvwg, ++#endif /* CONFIG_BCM63XX_CPU_6368 */ + }; + + static struct of_device_id const bcm963xx_boards_dt[] = { +@@ -2079,6 +2128,7 @@ static struct of_device_id const bcm963x + { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, }, + #endif /* CONFIG_BCM63XX_CPU_6362 */ + #ifdef CONFIG_BCM63XX_CPU_6368 ++ { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, + #endif /* CONFIG_BCM63XX_CPU_6368 */ + #ifdef CONFIG_BCM63XX_CPU_63268 + #endif /* CONFIG_BCM63XX_CPU_63268 */ +--- a/arch/mips/bcm63xx/boards/board_common.c ++++ b/arch/mips/bcm63xx/boards/board_common.c +@@ -81,12 +81,25 @@ void __init board_early_setup(const stru + bcm63xx_pci_enabled = 1; + if (BCMCPU_IS_6348()) + val |= GPIO_MODE_6348_G2_PCI; ++ ++ if (BCMCPU_IS_6368()) ++ val |= GPIO_MODE_6368_PCI_REQ1 | ++ GPIO_MODE_6368_PCI_GNT1 | ++ GPIO_MODE_6368_PCI_INTB | ++ GPIO_MODE_6368_PCI_REQ0 | ++ GPIO_MODE_6368_PCI_GNT0; + } + #endif + + if (board.has_pccard) { + if (BCMCPU_IS_6348()) + val |= GPIO_MODE_6348_G1_MII_PCCARD; ++ ++ if (BCMCPU_IS_6368()) ++ val |= GPIO_MODE_6368_PCMCIA_CD1 | ++ GPIO_MODE_6368_PCMCIA_CD2 | ++ GPIO_MODE_6368_PCMCIA_VS1 | ++ GPIO_MODE_6368_PCMCIA_VS2; + } + + if (board.has_enet0 && !board.enet0.use_internal_phy) { diff --git a/target/linux/bcm63xx/patches-5.4/652-bcm63xx-add-support-for-96368MVNgr-board.patch b/target/linux/bcm63xx/patches-5.4/652-bcm63xx-add-support-for-96368MVNgr-board.patch new file mode 100644 index 0000000000..663304d08f --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/652-bcm63xx-add-support-for-96368MVNgr-board.patch @@ -0,0 +1,69 @@ +From f457fc2eb9bb915b5a4d251c7c68d4694cf07b01 Mon Sep 17 00:00:00 2001 +From: Maxime Bizon +Date: Fri, 4 Nov 2011 12:33:48 +0100 +Subject: [PATCH 33/63] bcm63xx: add support for 96368MVNgr board. + +--- + arch/mips/bcm63xx/boards/board_bcm963xx.c | 67 +++++++++++++++++++++++++++++ + 1 files changed, 67 insertions(+), 0 deletions(-) + +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1942,6 +1942,41 @@ static struct board_info __initdata boar + }, + }, + }; ++ ++static struct board_info __initdata board_96368mvngr = { ++ .name = "96368MVNgr", ++ .expected_cpu_id = 0x6368, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "port1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "port2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "port3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "port4", ++ }, ++ }, ++ }, ++}; + #endif /* CONFIG_BCM63XX_CPU_6368 */ + + /* +@@ -2031,6 +2066,7 @@ static const struct board_info __initcon + #endif /* CONFIG_BCM63XX_CPU_6362 */ + #ifdef CONFIG_BCM63XX_CPU_6368 + &board_96368mvwg, ++ &board_96368mvngr, + #endif /* CONFIG_BCM63XX_CPU_6368 */ + }; + +@@ -2128,6 +2164,7 @@ static struct of_device_id const bcm963x + { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, }, + #endif /* CONFIG_BCM63XX_CPU_6362 */ + #ifdef CONFIG_BCM63XX_CPU_6368 ++ { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, }, + { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, + #endif /* CONFIG_BCM63XX_CPU_6368 */ + #ifdef CONFIG_BCM63XX_CPU_63268 diff --git a/target/linux/bcm63xx/patches-5.4/653-board_bcm6369-comtrend-wap-5813n.patch b/target/linux/bcm63xx/patches-5.4/653-board_bcm6369-comtrend-wap-5813n.patch new file mode 100644 index 0000000000..0386dc8308 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/653-board_bcm6369-comtrend-wap-5813n.patch @@ -0,0 +1,75 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -13,6 +13,8 @@ + #include + #include + #include ++#include ++#include + #include + #include + #include +@@ -1977,6 +1979,47 @@ static struct board_info __initdata boar + }, + }, + }; ++ ++static struct sprom_fixup __initdata wap5813n_fixups[] = { ++ { .offset = 97, .value = 0xfeed }, ++ { .offset = 98, .value = 0x15d1 }, ++ { .offset = 99, .value = 0xfb0d }, ++ { .offset = 113, .value = 0xfef7 }, ++ { .offset = 114, .value = 0x15f7 }, ++ { .offset = 115, .value = 0xfb1a }, ++}; ++ ++static struct board_info __initdata board_WAP5813n = { ++ .name = "96369R-1231N", ++ .expected_cpu_id = 0x6368, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [4] = { ++ .used = 1, ++ .phy_id = 0xff, ++ .bypass_link = 1, ++ .force_speed = 1000, ++ .force_duplex_full = 1, ++ .name = "RGMII", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM43222, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ .board_fixups = wap5813n_fixups, ++ .num_board_fixups = ARRAY_SIZE(wap5813n_fixups), ++ }, ++}; + #endif /* CONFIG_BCM63XX_CPU_6368 */ + + /* +@@ -2067,6 +2110,7 @@ static const struct board_info __initcon + #ifdef CONFIG_BCM63XX_CPU_6368 + &board_96368mvwg, + &board_96368mvngr, ++ &board_WAP5813n, + #endif /* CONFIG_BCM63XX_CPU_6368 */ + }; + +@@ -2166,6 +2210,7 @@ static struct of_device_id const bcm963x + #ifdef CONFIG_BCM63XX_CPU_6368 + { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, }, + { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, ++ { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, + #endif /* CONFIG_BCM63XX_CPU_6368 */ + #ifdef CONFIG_BCM63XX_CPU_63268 + #endif /* CONFIG_BCM63XX_CPU_63268 */ diff --git a/target/linux/bcm63xx/patches-5.4/654-board_bcm6368-comtrend-vr-3025u.patch b/target/linux/bcm63xx/patches-5.4/654-board_bcm6368-comtrend-vr-3025u.patch new file mode 100644 index 0000000000..7772594394 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/654-board_bcm6368-comtrend-vr-3025u.patch @@ -0,0 +1,78 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1980,6 +1980,59 @@ static struct board_info __initdata boar + }, + }; + ++static struct sprom_fixup __initdata vr3025u_fixups[] = { ++ { .offset = 97, .value = 0xfeb3 }, ++ { .offset = 98, .value = 0x1618 }, ++ { .offset = 99, .value = 0xfab0 }, ++ { .offset = 113, .value = 0xfed1 }, ++ { .offset = 114, .value = 0x1609 }, ++ { .offset = 115, .value = 0xfad9 }, ++}; ++ ++static struct board_info __initdata board_VR3025u = { ++ .name = "96368M-1541N", ++ .expected_cpu_id = 0x6368, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "port1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "port2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "port3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "port4", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM43222, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ .board_fixups = vr3025u_fixups, ++ .num_board_fixups = ARRAY_SIZE(vr3025u_fixups), ++ }, ++}; ++ + static struct sprom_fixup __initdata wap5813n_fixups[] = { + { .offset = 97, .value = 0xfeed }, + { .offset = 98, .value = 0x15d1 }, +@@ -2110,6 +2163,7 @@ static const struct board_info __initcon + #ifdef CONFIG_BCM63XX_CPU_6368 + &board_96368mvwg, + &board_96368mvngr, ++ &board_VR3025u, + &board_WAP5813n, + #endif /* CONFIG_BCM63XX_CPU_6368 */ + }; +@@ -2210,6 +2264,7 @@ static struct of_device_id const bcm963x + #ifdef CONFIG_BCM63XX_CPU_6368 + { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, }, + { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, ++ { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, + { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, + #endif /* CONFIG_BCM63XX_CPU_6368 */ + #ifdef CONFIG_BCM63XX_CPU_63268 diff --git a/target/linux/bcm63xx/patches-5.4/655-board_bcm6368-comtrend-vr-3025un.patch b/target/linux/bcm63xx/patches-5.4/655-board_bcm6368-comtrend-vr-3025un.patch new file mode 100644 index 0000000000..82c0887840 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/655-board_bcm6368-comtrend-vr-3025un.patch @@ -0,0 +1,78 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -2033,6 +2033,59 @@ static struct board_info __initdata boar + }, + }; + ++static struct sprom_fixup __initdata vr3025un_fixups[] = { ++ { .offset = 97, .value = 0xfeb3 }, ++ { .offset = 98, .value = 0x1618 }, ++ { .offset = 99, .value = 0xfab0 }, ++ { .offset = 113, .value = 0xfed1 }, ++ { .offset = 114, .value = 0x1609 }, ++ { .offset = 115, .value = 0xfad9 }, ++}; ++ ++static struct board_info __initdata board_VR3025un = { ++ .name = "96368M-1341N", ++ .expected_cpu_id = 0x6368, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "port1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "port2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "port3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "port4", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM43222, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ .board_fixups = vr3025un_fixups, ++ .num_board_fixups = ARRAY_SIZE(vr3025un_fixups), ++ }, ++}; ++ + static struct sprom_fixup __initdata wap5813n_fixups[] = { + { .offset = 97, .value = 0xfeed }, + { .offset = 98, .value = 0x15d1 }, +@@ -2164,6 +2217,7 @@ static const struct board_info __initcon + &board_96368mvwg, + &board_96368mvngr, + &board_VR3025u, ++ &board_VR3025un, + &board_WAP5813n, + #endif /* CONFIG_BCM63XX_CPU_6368 */ + }; +@@ -2265,6 +2319,7 @@ static struct of_device_id const bcm963x + { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, }, + { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, + { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, ++ { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, }, + { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, + #endif /* CONFIG_BCM63XX_CPU_6368 */ + #ifdef CONFIG_BCM63XX_CPU_63268 diff --git a/target/linux/bcm63xx/patches-5.4/656-board_bcm6368-zyxel-p870hw-51a-v2.patch b/target/linux/bcm63xx/patches-5.4/656-board_bcm6368-zyxel-p870hw-51a-v2.patch new file mode 100644 index 0000000000..0c2c2b9c8d --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/656-board_bcm6368-zyxel-p870hw-51a-v2.patch @@ -0,0 +1,67 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1989,6 +1989,48 @@ static struct sprom_fixup __initdata vr3 + { .offset = 115, .value = 0xfad9 }, + }; + ++static struct board_info __initdata board_P870HW51A_V2 = { ++ .name = "P870HW-51a_v2", ++ .expected_cpu_id = 0x6368, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "port1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "port2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "port3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "port4", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM4318, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ }, ++}; ++ + static struct board_info __initdata board_VR3025u = { + .name = "96368M-1541N", + .expected_cpu_id = 0x6368, +@@ -2216,6 +2258,7 @@ static const struct board_info __initcon + #ifdef CONFIG_BCM63XX_CPU_6368 + &board_96368mvwg, + &board_96368mvngr, ++ &board_P870HW51A_V2, + &board_VR3025u, + &board_VR3025un, + &board_WAP5813n, +@@ -2321,6 +2364,7 @@ static struct of_device_id const bcm963x + { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, + { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, }, + { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, ++ { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, + #endif /* CONFIG_BCM63XX_CPU_6368 */ + #ifdef CONFIG_BCM63XX_CPU_63268 + #endif /* CONFIG_BCM63XX_CPU_63268 */ diff --git a/target/linux/bcm63xx/patches-5.4/657-board_bcm6368-netgear-dgnd3700-v1.patch b/target/linux/bcm63xx/patches-5.4/657-board_bcm6368-netgear-dgnd3700-v1.patch new file mode 100644 index 0000000000..47a19afbfa --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/657-board_bcm6368-netgear-dgnd3700-v1.patch @@ -0,0 +1,49 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1980,6 +1980,30 @@ static struct board_info __initdata boar + }, + }; + ++static struct board_info __initdata board_DGND3700v1_3800B = { ++ .name = "DGND3700v1_3800B", ++ .expected_cpu_id = 0x6368, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [5] = { ++ .used = 1, ++ .phy_id = 0xff, ++ .bypass_link = 1, ++ .force_speed = 1000, ++ .force_duplex_full = 1, ++ .name = "RGMII", ++ }, ++ }, ++ }, ++}; ++ + static struct sprom_fixup __initdata vr3025u_fixups[] = { + { .offset = 97, .value = 0xfeb3 }, + { .offset = 98, .value = 0x1618 }, +@@ -2258,6 +2282,7 @@ static const struct board_info __initcon + #ifdef CONFIG_BCM63XX_CPU_6368 + &board_96368mvwg, + &board_96368mvngr, ++ &board_DGND3700v1_3800B, + &board_P870HW51A_V2, + &board_VR3025u, + &board_VR3025un, +@@ -2364,6 +2389,7 @@ static struct of_device_id const bcm963x + { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, + { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, }, + { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, ++ { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, }, + { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, + #endif /* CONFIG_BCM63XX_CPU_6368 */ + #ifdef CONFIG_BCM63XX_CPU_63268 diff --git a/target/linux/bcm63xx/patches-5.4/658-board_bcm6368-huawei-echolife-hg655b.patch b/target/linux/bcm63xx/patches-5.4/658-board_bcm6368-huawei-echolife-hg655b.patch new file mode 100644 index 0000000000..c1ad040cba --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/658-board_bcm6368-huawei-echolife-hg655b.patch @@ -0,0 +1,71 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -2004,6 +2004,52 @@ static struct board_info __initdata boar + }, + }; + ++static struct board_info __initdata board_HG655b = { ++ .name = "HW65x", ++ .expected_cpu_id = 0x6368, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_caldata = 1, ++ .caldata = { ++ { ++ .vendor = PCI_VENDOR_ID_RALINK, ++ .caldata_offset = 0x7c0000, ++ .slot = 1, ++ .eeprom = "rt2x00.eeprom", ++ }, ++ }, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "port1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "port2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "port3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "port4", ++ }, ++ }, ++ }, ++}; ++ + static struct sprom_fixup __initdata vr3025u_fixups[] = { + { .offset = 97, .value = 0xfeb3 }, + { .offset = 98, .value = 0x1618 }, +@@ -2283,6 +2329,7 @@ static const struct board_info __initcon + &board_96368mvwg, + &board_96368mvngr, + &board_DGND3700v1_3800B, ++ &board_HG655b, + &board_P870HW51A_V2, + &board_VR3025u, + &board_VR3025un, +@@ -2389,6 +2436,7 @@ static struct of_device_id const bcm963x + { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, + { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, }, + { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, ++ { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, }, + { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, }, + { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, + #endif /* CONFIG_BCM63XX_CPU_6368 */ diff --git a/target/linux/bcm63xx/patches-5.4/659-board_bcm6368-comtrend-vr-3026e.patch b/target/linux/bcm63xx/patches-5.4/659-board_bcm6368-comtrend-vr-3026e.patch new file mode 100644 index 0000000000..4be53d10ab --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/659-board_bcm6368-comtrend-vr-3026e.patch @@ -0,0 +1,78 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -2198,6 +2198,59 @@ static struct board_info __initdata boar + }, + }; + ++static struct sprom_fixup __initdata vr3026e_fixups[] = { ++ { .offset = 97, .value = 0xfeb3 }, ++ { .offset = 98, .value = 0x1618 }, ++ { .offset = 99, .value = 0xfab0 }, ++ { .offset = 113, .value = 0xfed1 }, ++ { .offset = 114, .value = 0x1609 }, ++ { .offset = 115, .value = 0xfad9 }, ++}; ++ ++static struct board_info __initdata board_VR3026e = { ++ .name = "96368MT-1341N1", ++ .expected_cpu_id = 0x6368, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "port1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "port2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "port3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "port4", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM43222, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ .board_fixups = vr3026e_fixups, ++ .num_board_fixups = ARRAY_SIZE(vr3026e_fixups), ++ }, ++}; ++ + static struct sprom_fixup __initdata wap5813n_fixups[] = { + { .offset = 97, .value = 0xfeed }, + { .offset = 98, .value = 0x15d1 }, +@@ -2333,6 +2386,7 @@ static const struct board_info __initcon + &board_P870HW51A_V2, + &board_VR3025u, + &board_VR3025un, ++ &board_VR3026e, + &board_WAP5813n, + #endif /* CONFIG_BCM63XX_CPU_6368 */ + }; +@@ -2435,6 +2489,7 @@ static struct of_device_id const bcm963x + { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, + { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, + { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, }, ++ { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, }, + { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, + { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, }, + { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, }, diff --git a/target/linux/bcm63xx/patches-5.4/660-board_bcm6368-huawei-echolife-hg622.patch b/target/linux/bcm63xx/patches-5.4/660-board_bcm6368-huawei-echolife-hg622.patch new file mode 100644 index 0000000000..c025a45eeb --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/660-board_bcm6368-huawei-echolife-hg622.patch @@ -0,0 +1,71 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -2050,6 +2050,52 @@ static struct board_info __initdata boar + }, + }; + ++static struct board_info __initdata board_HG622 = { ++ .name = "96368MVWG_hg622", ++ .expected_cpu_id = 0x6368, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_caldata = 1, ++ .caldata = { ++ { ++ .vendor = PCI_VENDOR_ID_RALINK, ++ .caldata_offset = 0xfa0000, ++ .slot = 1, ++ .eeprom = "rt2x00.eeprom", ++ }, ++ }, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "port1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "port2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "port3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "port4", ++ }, ++ }, ++ }, ++}; ++ + static struct sprom_fixup __initdata vr3025u_fixups[] = { + { .offset = 97, .value = 0xfeb3 }, + { .offset = 98, .value = 0x1618 }, +@@ -2382,6 +2428,7 @@ static const struct board_info __initcon + &board_96368mvwg, + &board_96368mvngr, + &board_DGND3700v1_3800B, ++ &board_HG622, + &board_HG655b, + &board_P870HW51A_V2, + &board_VR3025u, +@@ -2491,6 +2538,7 @@ static struct of_device_id const bcm963x + { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, }, + { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, }, + { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, ++ { .compatible = "huawei,echolife-hg622", .data = &board_HG622, }, + { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, }, + { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, }, + { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, diff --git a/target/linux/bcm63xx/patches-5.4/661-board_bcm6369-netgear-evg2000.patch b/target/linux/bcm63xx/patches-5.4/661-board_bcm6369-netgear-evg2000.patch new file mode 100644 index 0000000000..b33cb3a1ce --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/661-board_bcm6369-netgear-evg2000.patch @@ -0,0 +1,62 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -2004,6 +2004,43 @@ static struct board_info __initdata boar + }, + }; + ++static struct sprom_fixup __initdata EVG2000_fixups[] = { ++ { .offset = 219, .value = 0xec08 }, ++}; ++ ++static struct board_info __initdata board_EVG2000 = { ++ .name = "96369PVG", ++ .expected_cpu_id = 0x6368, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [5] = { ++ .used = 1, ++ .phy_id = 0xff, ++ .bypass_link = 1, ++ .force_speed = 1000, ++ .force_duplex_full = 1, ++ .name = "RGMII", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM4322, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ .board_fixups = EVG2000_fixups, ++ .num_board_fixups = ARRAY_SIZE(EVG2000_fixups), ++ }, ++}; ++ + static struct board_info __initdata board_HG655b = { + .name = "HW65x", + .expected_cpu_id = 0x6368, +@@ -2428,6 +2465,7 @@ static const struct board_info __initcon + &board_96368mvwg, + &board_96368mvngr, + &board_DGND3700v1_3800B, ++ &board_EVG2000, + &board_HG622, + &board_HG655b, + &board_P870HW51A_V2, +@@ -2541,6 +2579,7 @@ static struct of_device_id const bcm963x + { .compatible = "huawei,echolife-hg622", .data = &board_HG622, }, + { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, }, + { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, }, ++ { .compatible = "netgear,evg2000", .data = &board_EVG2000, }, + { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, + #endif /* CONFIG_BCM63XX_CPU_6368 */ + #ifdef CONFIG_BCM63XX_CPU_63268 diff --git a/target/linux/bcm63xx/patches-5.4/662-board_bcm6368-adb-av4202n.patch b/target/linux/bcm63xx/patches-5.4/662-board_bcm6368-adb-av4202n.patch new file mode 100644 index 0000000000..5f224e5bd4 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/662-board_bcm6368-adb-av4202n.patch @@ -0,0 +1,68 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1904,6 +1904,49 @@ static struct board_info __initdata boar + * known 6368 boards + */ + #ifdef CONFIG_BCM63XX_CPU_6368 ++static struct board_info __initdata board_AV4202N = { ++ .name = "96368_Swiss_S1", ++ .expected_cpu_id = 0x6368, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "port1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "port2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "port3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "port4", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM4322, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ }, ++}; ++ + static struct board_info __initdata board_96368mvwg = { + .name = "96368MVWG", + .expected_cpu_id = 0x6368, +@@ -2462,6 +2505,7 @@ static const struct board_info __initcon + &board_hg253s_v2, + #endif /* CONFIG_BCM63XX_CPU_6362 */ + #ifdef CONFIG_BCM63XX_CPU_6368 ++ &board_AV4202N, + &board_96368mvwg, + &board_96368mvngr, + &board_DGND3700v1_3800B, +@@ -2570,6 +2614,7 @@ static struct of_device_id const bcm963x + { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, }, + #endif /* CONFIG_BCM63XX_CPU_6362 */ + #ifdef CONFIG_BCM63XX_CPU_6368 ++ { .compatible = "adb,av4202n", .data = &board_AV4202N, }, + { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, }, + { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, + { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, diff --git a/target/linux/bcm63xx/patches-5.4/663-board_bcm6368-observa-vh4032n.patch b/target/linux/bcm63xx/patches-5.4/663-board_bcm6368-observa-vh4032n.patch new file mode 100644 index 0000000000..d2b0a44c29 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/663-board_bcm6368-observa-vh4032n.patch @@ -0,0 +1,125 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -2377,6 +2377,106 @@ static struct board_info __initdata boar + }, + }; + ++static struct sprom_fixup __initdata vh4032n_fixups[] = { ++ { .offset = 2, .value = 0x04d2 }, ++ { .offset = 4, .value = 0x4350 }, ++ { .offset = 65, .value = 0x1300 }, ++ { .offset = 68, .value = 0x0402 }, ++ { .offset = 70, .value = 0x0090 }, ++ { .offset = 71, .value = 0x4c19 }, ++ { .offset = 72, .value = 0x2345 }, ++ { .offset = 87, .value = 0x0315 }, ++ { .offset = 88, .value = 0x0315 }, ++ { .offset = 96, .value = 0x2048 }, ++ { .offset = 97, .value = 0xfed7 }, ++ { .offset = 98, .value = 0x15a6 }, ++ { .offset = 99, .value = 0xfaee }, ++ { .offset = 100, .value = 0x3e3a }, ++ { .offset = 101, .value = 0x3a36 }, ++ { .offset = 102, .value = 0xff7f }, ++ { .offset = 103, .value = 0x11b9 }, ++ { .offset = 104, .value = 0xfc53 }, ++ { .offset = 105, .value = 0xffe6 }, ++ { .offset = 106, .value = 0xfdd2 }, ++ { .offset = 107, .value = 0xfe49 }, ++ { .offset = 108, .value = 0xff6a }, ++ { .offset = 109, .value = 0x136e }, ++ { .offset = 110, .value = 0xfbed }, ++ { .offset = 111, .value = 0x0000 }, ++ { .offset = 112, .value = 0x2048 }, ++ { .offset = 113, .value = 0xfee2 }, ++ { .offset = 114, .value = 0x15e5 }, ++ { .offset = 115, .value = 0xfaed }, ++ { .offset = 116, .value = 0x3e3a }, ++ { .offset = 117, .value = 0x3a36 }, ++ { .offset = 118, .value = 0xffc8 }, ++ { .offset = 119, .value = 0x12b8 }, ++ { .offset = 120, .value = 0xfca1 }, ++ { .offset = 121, .value = 0xff9b }, ++ { .offset = 122, .value = 0x122a }, ++ { .offset = 123, .value = 0xfcc8 }, ++ { .offset = 124, .value = 0xff95 }, ++ { .offset = 125, .value = 0x146b }, ++ { .offset = 126, .value = 0xfbba }, ++ { .offset = 127, .value = 0x0000 }, ++ { .offset = 161, .value = 0x0000 }, ++ { .offset = 162, .value = 0x0000 }, ++ { .offset = 169, .value = 0x0000 }, ++ { .offset = 170, .value = 0x0000 }, ++ { .offset = 171, .value = 0x0000 }, ++ { .offset = 172, .value = 0x0000 }, ++ { .offset = 173, .value = 0x0000 }, ++ { .offset = 174, .value = 0x0000 }, ++ { .offset = 175, .value = 0x0000 }, ++ { .offset = 176, .value = 0x0000 }, ++ { .offset = 219, .value = 0x1108 }, ++}; ++ ++static struct board_info __initdata board_VH4032N = { ++ .name = "VH4032N", ++ .expected_cpu_id = 0x6368, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "LAN4", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "LAN3", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "LAN2", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "LAN1", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM43222, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ .board_fixups = vh4032n_fixups, ++ .num_board_fixups = ARRAY_SIZE(vh4032n_fixups), ++ }, ++}; ++ + static struct sprom_fixup __initdata wap5813n_fixups[] = { + { .offset = 97, .value = 0xfeed }, + { .offset = 98, .value = 0x15d1 }, +@@ -2513,6 +2613,7 @@ static const struct board_info __initcon + &board_HG622, + &board_HG655b, + &board_P870HW51A_V2, ++ &board_VH4032N, + &board_VR3025u, + &board_VR3025un, + &board_VR3026e, +@@ -2625,6 +2726,7 @@ static struct of_device_id const bcm963x + { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, }, + { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, }, + { .compatible = "netgear,evg2000", .data = &board_EVG2000, }, ++ { .compatible = "observa,vh4032n", .data = &board_VH4032N, }, + { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, + #endif /* CONFIG_BCM63XX_CPU_6368 */ + #ifdef CONFIG_BCM63XX_CPU_63268 diff --git a/target/linux/bcm63xx/patches-5.4/664-board_bcm6368-actiontec-r1000h.patch b/target/linux/bcm63xx/patches-5.4/664-board_bcm6368-actiontec-r1000h.patch new file mode 100644 index 0000000000..716a6e030f --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/664-board_bcm6368-actiontec-r1000h.patch @@ -0,0 +1,48 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -2227,6 +2227,29 @@ static struct board_info __initdata boar + }, + }; + ++static struct board_info __initdata board_R1000H = { ++ .name = "R1000H", ++ .expected_cpu_id = 0x6368, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [5] = { ++ .used = 1, ++ .phy_id = 0xff, ++ .bypass_link = 1, ++ .force_speed = 1000, ++ .force_duplex_full = 1, ++ .name = "RGMII", ++ }, ++ }, ++ }, ++}; ++ + static struct board_info __initdata board_VR3025u = { + .name = "96368M-1541N", + .expected_cpu_id = 0x6368, +@@ -2613,6 +2636,7 @@ static const struct board_info __initcon + &board_HG622, + &board_HG655b, + &board_P870HW51A_V2, ++ &board_R1000H, + &board_VH4032N, + &board_VR3025u, + &board_VR3025un, +@@ -2715,6 +2739,7 @@ static struct of_device_id const bcm963x + { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, }, + #endif /* CONFIG_BCM63XX_CPU_6362 */ + #ifdef CONFIG_BCM63XX_CPU_6368 ++ { .compatible = "actiontec,r1000h", .data = &board_R1000H, }, + { .compatible = "adb,av4202n", .data = &board_AV4202N, }, + { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, }, + { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, diff --git a/target/linux/bcm63xx/patches-5.4/681-board_bcm63269-brcm-bcm963269bhr.patch b/target/linux/bcm63xx/patches-5.4/681-board_bcm63269-brcm-bcm963269bhr.patch new file mode 100644 index 0000000000..a064234114 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/681-board_bcm63269-brcm-bcm963269bhr.patch @@ -0,0 +1,67 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -2543,6 +2543,46 @@ static struct board_info __initdata boar + #endif /* CONFIG_BCM63XX_CPU_6368 */ + + /* ++ * known 63268/63269 boards ++ */ ++#ifdef CONFIG_BCM63XX_CPU_63268 ++static struct board_info __initdata board_963269bhr = { ++ .name = "963269BHR", ++ .expected_cpu_id = 0x63268, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "port1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "port2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "port3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "port4", ++ }, ++ }, ++ }, ++}; ++#endif /* CONFIG_BCM63XX_CPU_63268 */ ++ ++/* + * all boards + */ + static const struct board_info __initconst *bcm963xx_boards[] = { +@@ -2643,6 +2683,9 @@ static const struct board_info __initcon + &board_VR3026e, + &board_WAP5813n, + #endif /* CONFIG_BCM63XX_CPU_6368 */ ++#ifdef CONFIG_BCM63XX_CPU_63268 ++ &board_963269bhr, ++#endif /* CONFIG_BCM63XX_CPU_63268 */ + }; + + static struct of_device_id const bcm963xx_boards_dt[] = { +@@ -2755,6 +2798,7 @@ static struct of_device_id const bcm963x + { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, + #endif /* CONFIG_BCM63XX_CPU_6368 */ + #ifdef CONFIG_BCM63XX_CPU_63268 ++ { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, }, + #endif /* CONFIG_BCM63XX_CPU_63268 */ + #endif /* CONFIG_OF */ + { }, diff --git a/target/linux/bcm63xx/patches-5.4/682-board_bcm63268-inteno-vg50.patch b/target/linux/bcm63xx/patches-5.4/682-board_bcm63268-inteno-vg50.patch new file mode 100644 index 0000000000..1275af5c22 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/682-board_bcm63268-inteno-vg50.patch @@ -0,0 +1,67 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -2580,6 +2580,48 @@ static struct board_info __initdata boar + }, + }, + }; ++ ++static struct board_info __initdata board_vw6339gu = { ++ .name = "VW6339GU", ++ .expected_cpu_id = 0x63268, ++ ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "LAN2", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "LAN3", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "LAN4", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "LAN1", ++ }, ++ [4] = { ++ .used = 1, ++ .phy_id = 7, ++ .name = "WAN", ++ .mii_override = 1, ++ .timing_sel = 1, ++ }, ++ }, ++ }, ++}; + #endif /* CONFIG_BCM63XX_CPU_63268 */ + + /* +@@ -2685,6 +2727,7 @@ static const struct board_info __initcon + #endif /* CONFIG_BCM63XX_CPU_6368 */ + #ifdef CONFIG_BCM63XX_CPU_63268 + &board_963269bhr, ++ &board_vw6339gu, + #endif /* CONFIG_BCM63XX_CPU_63268 */ + }; + +@@ -2799,6 +2842,7 @@ static struct of_device_id const bcm963x + #endif /* CONFIG_BCM63XX_CPU_6368 */ + #ifdef CONFIG_BCM63XX_CPU_63268 + { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, }, ++ { .compatible = "inteno,vg50", .data = &board_vw6339gu, }, + #endif /* CONFIG_BCM63XX_CPU_63268 */ + #endif /* CONFIG_OF */ + { }, diff --git a/target/linux/bcm63xx/patches-5.4/683-board_bcm63268-brcm-bcm963268bu-p300.patch b/target/linux/bcm63xx/patches-5.4/683-board_bcm63268-brcm-bcm963268bu-p300.patch new file mode 100644 index 0000000000..c75d7a477e --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/683-board_bcm63268-brcm-bcm963268bu-p300.patch @@ -0,0 +1,84 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -2546,6 +2546,65 @@ static struct board_info __initdata boar + * known 63268/63269 boards + */ + #ifdef CONFIG_BCM63XX_CPU_63268 ++static struct board_info __initdata board_963268bu_p300 = { ++ .name = "963268BU_P300", ++ .expected_cpu_id = 0x63268, ++ ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_usbd = 1, ++ .usbd = { ++ .use_fullspeed = 0, ++ .port_no = 0, ++ }, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 17, ++ .name = "FE1", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "GbE2", ++ }, ++ [4] = { ++ .used = 1, ++ .phy_id = 0, ++ .name = "GbE3", ++ .mii_override = 1, ++ .timing_sel = 1, ++ }, ++ [5] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "GbE1", ++ .mii_override = 1, ++ .timing_sel = 1, ++ }, ++ [6] = { ++ .used = 1, ++ .phy_id = 24, ++ .name = "GbE4", ++ .mii_override = 1, ++ .timing_sel = 1, ++ }, ++ [7] = { ++ .used = 1, ++ .phy_id = 25, ++ .name = "GbE5", ++ .mii_override = 1, ++ .timing_sel = 1, ++ }, ++ }, ++ }, ++}; ++ + static struct board_info __initdata board_963269bhr = { + .name = "963269BHR", + .expected_cpu_id = 0x63268, +@@ -2726,6 +2785,7 @@ static const struct board_info __initcon + &board_WAP5813n, + #endif /* CONFIG_BCM63XX_CPU_6368 */ + #ifdef CONFIG_BCM63XX_CPU_63268 ++ &board_963268bu_p300, + &board_963269bhr, + &board_vw6339gu, + #endif /* CONFIG_BCM63XX_CPU_63268 */ +@@ -2841,6 +2901,7 @@ static struct of_device_id const bcm963x + { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, + #endif /* CONFIG_BCM63XX_CPU_6368 */ + #ifdef CONFIG_BCM63XX_CPU_63268 ++ { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, }, + { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, }, + { .compatible = "inteno,vg50", .data = &board_vw6339gu, }, + #endif /* CONFIG_BCM63XX_CPU_63268 */ diff --git a/target/linux/bcm63xx/patches-5.4/684-board_bcm63168-sky-sr102.patch b/target/linux/bcm63xx/patches-5.4/684-board_bcm63168-sky-sr102.patch new file mode 100644 index 0000000000..7f1fb58a32 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/684-board_bcm63168-sky-sr102.patch @@ -0,0 +1,61 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -2681,6 +2681,42 @@ static struct board_info __initdata boar + }, + }, + }; ++ ++static struct board_info __initdata board_BSKYB_63168 = { ++ .name = "BSKYB_63168", ++ .expected_cpu_id = 0x63268, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 4", ++ }, ++ }, ++ }, ++}; + #endif /* CONFIG_BCM63XX_CPU_63268 */ + + /* +@@ -2788,6 +2824,7 @@ static const struct board_info __initcon + &board_963268bu_p300, + &board_963269bhr, + &board_vw6339gu, ++ &board_BSKYB_63168, + #endif /* CONFIG_BCM63XX_CPU_63268 */ + }; + +@@ -2904,6 +2941,7 @@ static struct of_device_id const bcm963x + { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, }, + { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, }, + { .compatible = "inteno,vg50", .data = &board_vw6339gu, }, ++ { .compatible = "sky,sr102", .data = &board_BSKYB_63168, }, + #endif /* CONFIG_BCM63XX_CPU_63268 */ + #endif /* CONFIG_OF */ + { }, diff --git a/target/linux/bcm63xx/patches-5.4/685-board-bcm63168-comtrend-vr-3032u.patch b/target/linux/bcm63xx/patches-5.4/685-board-bcm63168-comtrend-vr-3032u.patch new file mode 100644 index 0000000000..af4c5388cc --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/685-board-bcm63168-comtrend-vr-3032u.patch @@ -0,0 +1,60 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -2640,6 +2640,41 @@ static struct board_info __initdata boar + }, + }; + ++static struct board_info __initdata board_VR3032u = { ++ .name = "963168M-1841N1", ++ .expected_cpu_id = 0x63268, ++ ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "LAN2", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "LAN3", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "LAN4", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "LAN1", ++ }, ++ }, ++ }, ++}; ++ + static struct board_info __initdata board_vw6339gu = { + .name = "VW6339GU", + .expected_cpu_id = 0x63268, +@@ -2823,6 +2858,7 @@ static const struct board_info __initcon + #ifdef CONFIG_BCM63XX_CPU_63268 + &board_963268bu_p300, + &board_963269bhr, ++ &board_VR3032u, + &board_vw6339gu, + &board_BSKYB_63168, + #endif /* CONFIG_BCM63XX_CPU_63268 */ +@@ -2940,6 +2976,7 @@ static struct of_device_id const bcm963x + #ifdef CONFIG_BCM63XX_CPU_63268 + { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, }, + { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, }, ++ { .compatible = "comtrend,vr-3032u", .data = &board_VR3032u, }, + { .compatible = "inteno,vg50", .data = &board_vw6339gu, }, + { .compatible = "sky,sr102", .data = &board_BSKYB_63168, }, + #endif /* CONFIG_BCM63XX_CPU_63268 */ diff --git a/target/linux/bcm63xx/patches-5.4/686-board-bcm63169-comtrend-vg-8050.patch b/target/linux/bcm63xx/patches-5.4/686-board-bcm63169-comtrend-vg-8050.patch new file mode 100644 index 0000000000..b55b4d3701 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/686-board-bcm63169-comtrend-vg-8050.patch @@ -0,0 +1,50 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -2640,6 +2640,31 @@ static struct board_info __initdata boar + }, + }; + ++static struct board_info __initdata board_VG8050 = { ++ .name = "963169P-1861N5", ++ .expected_cpu_id = 0x63268, ++ ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [6] = { ++ .used = 1, ++ .phy_id = 0xff, ++ .bypass_link = 1, ++ .force_speed = 1000, ++ .force_duplex_full = 1, ++ .mii_override = 1, ++ .timing_sel = 1, ++ .name = "RGMII", ++ }, ++ }, ++ }, ++}; ++ + static struct board_info __initdata board_VR3032u = { + .name = "963168M-1841N1", + .expected_cpu_id = 0x63268, +@@ -2858,6 +2883,7 @@ static const struct board_info __initcon + #ifdef CONFIG_BCM63XX_CPU_63268 + &board_963268bu_p300, + &board_963269bhr, ++ &board_VG8050, + &board_VR3032u, + &board_vw6339gu, + &board_BSKYB_63168, +@@ -2976,6 +3002,7 @@ static struct of_device_id const bcm963x + #ifdef CONFIG_BCM63XX_CPU_63268 + { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, }, + { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, }, ++ { .compatible = "comtrend,vg-8050", .data = &board_VG8050, }, + { .compatible = "comtrend,vr-3032u", .data = &board_VR3032u, }, + { .compatible = "inteno,vg50", .data = &board_vw6339gu, }, + { .compatible = "sky,sr102", .data = &board_BSKYB_63168, }, diff --git a/target/linux/bcm63xx/patches-5.4/687-board-bcm63167-sercomm-h500-s.patch b/target/linux/bcm63xx/patches-5.4/687-board-bcm63167-sercomm-h500-s.patch new file mode 100644 index 0000000000..5bcb50672d --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/687-board-bcm63167-sercomm-h500-s.patch @@ -0,0 +1,56 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -2777,6 +2777,36 @@ static struct board_info __initdata boar + }, + }, + }; ++ ++static struct board_info __initdata board_H500s = { ++ .name = "BXK00C-1.6", ++ .expected_cpu_id = 0x63268, ++ ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [3] = { ++ .used = 1, ++ .phy_id = 12, ++ .name = "WAN", ++ }, ++ [4] = { ++ .used = 1, ++ .phy_id = 0, ++ .bypass_link = 1, ++ .force_speed = 1000, ++ .force_duplex_full = 1, ++ .mii_override = 1, ++ .timing_sel = 1, ++ .name = "RGMII", ++ }, ++ }, ++ }, ++}; + #endif /* CONFIG_BCM63XX_CPU_63268 */ + + /* +@@ -2887,6 +2917,7 @@ static const struct board_info __initcon + &board_VR3032u, + &board_vw6339gu, + &board_BSKYB_63168, ++ &board_H500s, + #endif /* CONFIG_BCM63XX_CPU_63268 */ + }; + +@@ -3005,6 +3036,8 @@ static struct of_device_id const bcm963x + { .compatible = "comtrend,vg-8050", .data = &board_VG8050, }, + { .compatible = "comtrend,vr-3032u", .data = &board_VR3032u, }, + { .compatible = "inteno,vg50", .data = &board_vw6339gu, }, ++ { .compatible = "sercomm,h500-s-lowi", .data = &board_H500s, }, ++ { .compatible = "sercomm,h500-s-vfes", .data = &board_H500s, }, + { .compatible = "sky,sr102", .data = &board_BSKYB_63168, }, + #endif /* CONFIG_BCM63XX_CPU_63268 */ + #endif /* CONFIG_OF */