From: Hans de Goede <hdegoede@redhat.com>
Date: Wed, 17 Jun 2015 13:49:26 +0000 (+0200)
Subject: sunxi: musb: Move musb config and platdata to the sunxi-musb glue
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d42faf3198262710d17548950e1ab41413e8b7f9;p=project%2Fbcm63xx%2Fu-boot.git

sunxi: musb: Move musb config and platdata to the sunxi-musb glue

Move the musb config and platdata to the sunxi-musb glue, which is where
it really belongs. This is preparation patch for adding device-model
support for the sunxi-musb-host code.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
---

diff --git a/arch/arm/include/asm/arch-sunxi/usb_phy.h b/arch/arm/include/asm/arch-sunxi/usb_phy.h
index 5a9cacb6f4..17d31b8e31 100644
--- a/arch/arm/include/asm/arch-sunxi/usb_phy.h
+++ b/arch/arm/include/asm/arch-sunxi/usb_phy.h
@@ -19,3 +19,10 @@ void sunxi_usb_phy_power_off(int index);
 int sunxi_usb_phy_vbus_detect(int index);
 int sunxi_usb_phy_id_detect(int index);
 void sunxi_usb_phy_enable_squelch_detect(int index, int enable);
+
+/* Not really phy related, but we have to declare this somewhere ... */
+#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET)
+void sunxi_musb_board_init(void);
+#else
+#define sunxi_musb_board_init()
+#endif
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 7220af3454..afed6a31ca 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -31,7 +31,6 @@
 #include <asm/arch/usb_phy.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
-#include <linux/usb/musb.h>
 #include <net.h>
 
 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
@@ -449,28 +448,6 @@ void sunxi_board_init(void)
 }
 #endif
 
-#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET)
-extern const struct musb_platform_ops sunxi_musb_ops;
-
-static struct musb_hdrc_config musb_config = {
-	.multipoint     = 1,
-	.dyn_fifo       = 1,
-	.num_eps        = 6,
-	.ram_bits       = 11,
-};
-
-static struct musb_hdrc_platform_data musb_plat = {
-#if defined(CONFIG_MUSB_HOST)
-	.mode           = MUSB_HOST,
-#else
-	.mode		= MUSB_PERIPHERAL,
-#endif
-	.config         = &musb_config,
-	.power          = 250,
-	.platform_ops	= &sunxi_musb_ops,
-};
-#endif
-
 #ifdef CONFIG_USB_GADGET
 int g_dnl_board_usb_cable_connected(void)
 {
@@ -533,9 +510,8 @@ int misc_init_r(void)
 	if (ret)
 		return ret;
 #endif
-#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET)
-	musb_register(&musb_plat, NULL, (void *)SUNXI_USB0_BASE);
-#endif
+	sunxi_musb_board_init();
+
 	return 0;
 }
 #endif
diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c
index cafb48039e..cbd2954c41 100644
--- a/drivers/usb/musb-new/sunxi.c
+++ b/drivers/usb/musb-new/sunxi.c
@@ -26,17 +26,9 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/usb_phy.h>
 #include <asm-generic/gpio.h>
+#include <linux/usb/musb.h>
 #include "linux-compat.h"
 #include "musb_core.h"
-#ifdef CONFIG_AXP152_POWER
-#include <axp152.h>
-#endif
-#ifdef CONFIG_AXP209_POWER
-#include <axp209.h>
-#endif
-#ifdef CONFIG_AXP221_POWER
-#include <axp221.h>
-#endif
 
 /******************************************************************************
  ******************************************************************************
@@ -277,8 +269,31 @@ static int sunxi_musb_init(struct musb *musb)
 	return 0;
 }
 
-const struct musb_platform_ops sunxi_musb_ops = {
+static const struct musb_platform_ops sunxi_musb_ops = {
 	.init		= sunxi_musb_init,
 	.enable		= sunxi_musb_enable,
 	.disable	= sunxi_musb_disable,
 };
+
+static struct musb_hdrc_config musb_config = {
+	.multipoint     = 1,
+	.dyn_fifo       = 1,
+	.num_eps        = 6,
+	.ram_bits       = 11,
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#if defined(CONFIG_MUSB_HOST)
+	.mode           = MUSB_HOST,
+#else
+	.mode		= MUSB_PERIPHERAL,
+#endif
+	.config         = &musb_config,
+	.power          = 250,
+	.platform_ops	= &sunxi_musb_ops,
+};
+
+void sunxi_musb_board_init(void)
+{
+	musb_register(&musb_plat, NULL, (void *)SUNXI_USB0_BASE);
+}