From: Rafał Miłecki <zajec5@gmail.com>
Date: Wed, 11 Feb 2015 09:14:48 +0000 (+0000)
Subject: kernel: 3.18: complete backport of some bcma patch
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d417d58ff7d9f129dc0b258ccf70c62d4a6214bf;p=openwrt%2Fstaging%2Fyousong.git

kernel: 3.18: complete backport of some bcma patch

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44384
---

diff --git a/target/linux/generic/patches-3.18/025-bcma_backport.patch b/target/linux/generic/patches-3.18/025-bcma_backport.patch
index 07ceb037b7..ca24e86133 100644
--- a/target/linux/generic/patches-3.18/025-bcma_backport.patch
+++ b/target/linux/generic/patches-3.18/025-bcma_backport.patch
@@ -247,3 +247,40 @@
  {
  	return 0;
  }
+--- a/Documentation/devicetree/bindings/bus/bcma.txt
++++ b/Documentation/devicetree/bindings/bus/bcma.txt
+@@ -8,6 +8,11 @@ Required properties:
+ 
+ The cores on the AXI bus are automatically detected by bcma with the
+ memory ranges they are using and they get registered afterwards.
++Automatic detection of the IRQ number is not working on
++BCM47xx/BCM53xx ARM SoCs. To assign IRQ numbers to the cores, provide
++them manually through device tree. Use an interrupt-map to specify the
++IRQ used by the devices on the bus. The first address is just an index,
++because we do not have any special register.
+ 
+ The top-level axi bus may contain children representing attached cores
+ (devices). This is needed since some hardware details can't be auto
+@@ -22,6 +27,22 @@ Example:
+ 		ranges = <0x00000000 0x18000000 0x00100000>;
+ 		#address-cells = <1>;
+ 		#size-cells = <1>;
++		#interrupt-cells = <1>;
++		interrupt-map-mask = <0x000fffff 0xffff>;
++		interrupt-map =
++			/* Ethernet Controller 0 */
++			<0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
++
++			/* Ethernet Controller 1 */
++			<0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
++
++			/* PCIe Controller 0 */
++			<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
++			<0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+ 
+ 		chipcommon {
+ 			reg = <0x00000000 0x1000>;