From: Sungbo Eo Date: Wed, 1 Jan 2020 12:33:10 +0000 (+0900) Subject: ramips: mt7620/mt7621: remove invalid mediatek,portmap X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d3c0a944059b;p=openwrt%2Fstaging%2Fmkresin.git ramips: mt7620/mt7621: remove invalid mediatek,portmap mt7620 and mt7621 use mt7530 driver, which only accepts "llllw", "wllll", and "lwlll" values. According to its switch setup, Mi Router 3G v2 has a WAN port at port 4, so the correct value should be "llllw". Signed-off-by: Sungbo Eo --- diff --git a/target/linux/ramips/dts/mt7620a_edimax_ew-747x.dtsi b/target/linux/ramips/dts/mt7620a_edimax_ew-747x.dtsi index 3b8ba4ec38..1202ac1b69 100644 --- a/target/linux/ramips/dts/mt7620a_edimax_ew-747x.dtsi +++ b/target/linux/ramips/dts/mt7620a_edimax_ew-747x.dtsi @@ -122,7 +122,6 @@ pinctrl-names = "default"; pinctrl-0 = <&rgmii1_pins &mdio_pins &phy_reset_pins>; - mediatek,portmap = "l"; mediatek,mdio-mode = <1>; phy-reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; diff --git a/target/linux/ramips/dts/mt7620a_tplink_archer-mr200.dts b/target/linux/ramips/dts/mt7620a_tplink_archer-mr200.dts index dccced0f18..ea42ef2c54 100644 --- a/target/linux/ramips/dts/mt7620a_tplink_archer-mr200.dts +++ b/target/linux/ramips/dts/mt7620a_tplink_archer-mr200.dts @@ -169,9 +169,8 @@ }; ðernet { - mtd-mac-address = <&rom 0xf100>; - mediatek,portmap = "llll"; - }; + mtd-mac-address = <&rom 0xf100>; +}; &ehci { status = "okay"; diff --git a/target/linux/ramips/dts/mt7621_xiaomi_mir3g-v2.dts b/target/linux/ramips/dts/mt7621_xiaomi_mir3g-v2.dts index ec0ee087e8..6e06ed07e8 100644 --- a/target/linux/ramips/dts/mt7621_xiaomi_mir3g-v2.dts +++ b/target/linux/ramips/dts/mt7621_xiaomi_mir3g-v2.dts @@ -134,7 +134,7 @@ ðernet { mtd-mac-address = <&factory 0xe000>; - mediatek,portmap = "lllwl"; + mediatek,portmap = "llllw"; }; &state_default {