From: John Crispin <john@openwrt.org>
Date: Fri, 12 Apr 2013 18:57:01 +0000 (+0000)
Subject: update rt2880 config-3.8
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d3a46c4b7f7e1c83998b8c5c4d2eca0c6fceda74;p=openwrt%2Fstaging%2Fneocturne.git

update rt2880 config-3.8

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36327
---

diff --git a/target/linux/ramips/rt288x/config-3.8 b/target/linux/ramips/rt288x/config-3.8
index ab705e0068..3ab4c93cb5 100644
--- a/target/linux/ramips/rt288x/config-3.8
+++ b/target/linux/ramips/rt288x/config-3.8
@@ -8,6 +8,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_CEVT_R4K=y
+CONFIG_CLKDEV_LOOKUP=y
 CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
 CONFIG_CMDLINE_BOOL=y
 # CONFIG_CMDLINE_OVERRIDE is not set
@@ -26,6 +27,10 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_CSRC_R4K=y
 CONFIG_DECOMPRESS_LZMA=y
 CONFIG_DMA_NONCOHERENT=y
+# CONFIG_DTB_RT2880_EVAL is not set
+# CONFIG_DTB_RT305X_EVAL is not set
+CONFIG_DTB_RT_NONE=y
+CONFIG_DTC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_ATOMIC64=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -34,9 +39,9 @@ CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_IO=y
 CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
 CONFIG_GENERIC_SMP_IDLE_THREAD=y
 CONFIG_GPIOLIB=y
+CONFIG_GPIO_RALINK=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_HARDWARE_WATCHPOINTS=y
 CONFIG_HAS_DMA=y
@@ -59,6 +64,7 @@ CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_HAVE_GENERIC_HARDIRQS=y
 CONFIG_HAVE_IDE=y
 CONFIG_HAVE_IRQ_WORK=y
+CONFIG_HAVE_MACH_CLKDEV=y
 CONFIG_HAVE_MEMBLOCK=y
 CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
 CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
@@ -69,56 +75,63 @@ CONFIG_HW_HAS_PCI=y
 CONFIG_HW_RANDOM=m
 CONFIG_IMAGE_CMDLINE_HACK=y
 CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IP17XX_PHY=y
 CONFIG_IRQ_CPU=y
+CONFIG_IRQ_DOMAIN=y
 CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_M25PXX_USE_FAST_READ=y
 CONFIG_MDIO_BOARDINFO=y
 # CONFIG_MII is not set
 CONFIG_MIPS=y
 # CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
 CONFIG_MIPS_L1_CACHE_SHIFT=4
-CONFIG_MIPS_MACHINE=y
+# CONFIG_MIPS_MACHINE is not set
 CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MIPS_RALINK=y
 # CONFIG_MIPS_SEAD3 is not set
 CONFIG_MODULES_USE_ELF_REL=y
 # CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_OF_PARTS=y
 CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_UIMAGE_SPLIT=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_PER_CPU_KM=y
 CONFIG_NET_RAMIPS=y
 # CONFIG_NET_RAMIPS_DEBUG is not set
 # CONFIG_NET_RAMIPS_DEBUG_FS is not set
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_NET_SCH_FQ_CODEL=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_DEVICE=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
 CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI is not set
 CONFIG_PERCPU_RWSEM=y
 CONFIG_PERF_USE_VMALLOC=y
 CONFIG_PHYLIB=y
 # CONFIG_PREEMPT_RCU is not set
-CONFIG_RALINK_DEV_GPIO_BUTTONS=y
-CONFIG_RALINK_DEV_GPIO_LEDS=y
-CONFIG_RALINK_RT288X=y
-# CONFIG_RALINK_RT305X is not set
-# CONFIG_RALINK_RT3883 is not set
-CONFIG_RAMIPS_WDT=y
-CONFIG_RT288X_MACH_BR6524N=y
-CONFIG_RT288X_MACH_F5D8235_V1=y
-CONFIG_RT288X_MACH_RT_N15=y
-CONFIG_RT288X_MACH_V11ST_FE=y
-CONFIG_RT288X_MACH_WLI_TX4_AG300N=y
-CONFIG_RT288X_MACH_WZR_AGL300NH=y
-CONFIG_RTL8366S_PHY=y
-CONFIG_RTL8366_SMI=y
+CONFIG_RALINK=y
+CONFIG_RALINK_WDT=y
 # CONFIG_SCSI_DMA is not set
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RT288X=y
+CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
+# CONFIG_SOC_MT7620 is not set
 CONFIG_SOC_RT288X=y
+# CONFIG_SOC_RT305X is not set
+# CONFIG_SOC_RT3883 is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_RALINK=y
 CONFIG_SWCONFIG=y
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_SYS_HAS_CPU_MIPS32_R2=y
@@ -128,6 +141,10 @@ CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_TICK_CPU_ACCOUNTING=y
 CONFIG_UIDGID_CONVERTED=y
-CONFIG_USB_ARCH_HAS_XHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_XHCI is not set
 CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
 CONFIG_ZONE_DMA_FLAG=0