From: Rafał Miłecki Date: Thu, 14 Apr 2016 05:54:20 +0000 (+0000) Subject: bcm53xx: backport BCM5301X earlycon and USB VCC patches X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d30766c9865de0097df38a7ec55ad92c1879b0da;p=openwrt%2Fstaging%2Fkaloz.git bcm53xx: backport BCM5301X earlycon and USB VCC patches Signed-off-by: Rafał Miłecki SVN-Revision: 49166 --- diff --git a/target/linux/bcm53xx/patches-4.4/034-ARM-BCM5301X-Add-DT-for-D-Link-DIR-885L.patch b/target/linux/bcm53xx/patches-4.4/034-ARM-BCM5301X-Add-DT-for-D-Link-DIR-885L.patch new file mode 100644 index 0000000000..eee48f82f9 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.4/034-ARM-BCM5301X-Add-DT-for-D-Link-DIR-885L.patch @@ -0,0 +1,141 @@ +From 3ea03a9d512ca19d59315492230e954a1653ff6e Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Tue, 26 Jan 2016 23:35:16 +0100 +Subject: [PATCH] ARM: BCM5301X: Add DT for D-Link DIR-885L +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +It's device based on BCM47094 which is quite similar to BCM4709 except +for higher CPU frequency. This device has 2 flash memories, it boots +from serial one and stores firmware on NAND. Other than that we define +standard stuff like LEDs, buttons and UART. + +Signed-off-by: Rafał Miłecki +Signed-off-by: Florian Fainelli +--- + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -76,6 +76,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ + bcm4709-buffalo-wxr-1900dhp.dtb \ + bcm4709-netgear-r7000.dtb \ + bcm4709-netgear-r8000.dtb \ ++ bcm47094-dlink-dir-885l.dtb \ + bcm94708.dtb \ + bcm94709.dtb \ + bcm953012k.dtb +--- /dev/null ++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +@@ -0,0 +1,111 @@ ++/* ++ * Broadcom BCM470X / BCM5301X ARM platform code. ++ * DTS for D-Link DIR-885L ++ * ++ * Copyright (C) 2016 Rafał Miłecki ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++/dts-v1/; ++ ++#include "bcm4708.dtsi" ++#include "bcm5301x-nand-cs0-bch8.dtsi" ++ ++/ { ++ compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708"; ++ model = "D-Link DIR-885L"; ++ ++ chosen { ++ bootargs = "console=ttyS0,115200"; ++ }; ++ ++ memory { ++ reg = <0x00000000 0x08000000>; ++ }; ++ ++ nand: nand@18028000 { ++ nandcs@0 { ++ partition@0 { ++ label = "firmware"; ++ reg = <0x00000000 0x08000000>; ++ }; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ power-white { ++ label = "bcm53xx:white:power"; ++ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; ++ linux,default-trigger = "default-on"; ++ }; ++ ++ wan-white { ++ label = "bcm53xx:white:wan"; ++ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; ++ linux,default-trigger = "default-off"; ++ }; ++ ++ power-amber { ++ label = "bcm53xx:amber:power"; ++ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; ++ linux,default-trigger = "default-off"; ++ }; ++ ++ wan-amber { ++ label = "bcm53xx:amber:wan"; ++ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; ++ linux,default-trigger = "default-off"; ++ }; ++ ++ usb3-white { ++ label = "bcm53xx:white:usb3"; ++ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; ++ linux,default-trigger = "default-off"; ++ }; ++ ++ 2ghz { ++ label = "bcm53xx:white:2ghz"; ++ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; ++ linux,default-trigger = "default-off"; ++ }; ++ ++ 5ghz { ++ label = "bcm53xx:white:5ghz"; ++ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; ++ linux,default-trigger = "default-off"; ++ }; ++ }; ++ ++ gpio-keys { ++ compatible = "gpio-keys"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ wps { ++ label = "WPS"; ++ linux,code = ; ++ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; ++ }; ++ ++ /* Switch: router / extender */ ++ extender { ++ label = "Extender"; ++ linux,code = ; ++ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; ++ }; ++ ++ restart { ++ label = "Reset"; ++ linux,code = ; ++ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++ clock-frequency = <125000000>; ++}; diff --git a/target/linux/bcm53xx/patches-4.4/035-ARM-BCM5301X-Set-vcc-gpio-for-USB-controllers-of-few.patch b/target/linux/bcm53xx/patches-4.4/035-ARM-BCM5301X-Set-vcc-gpio-for-USB-controllers-of-few.patch new file mode 100644 index 0000000000..3a32c8bb95 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.4/035-ARM-BCM5301X-Set-vcc-gpio-for-USB-controllers-of-few.patch @@ -0,0 +1,117 @@ +From dd70ccfaa79189feaa78609d44f7c3e7fa1dc6ff Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Wed, 23 Mar 2016 16:52:47 +0100 +Subject: [PATCH] ARM: BCM5301X: Set vcc-gpio for USB controllers of few + devices +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +There are few devices that have USB power controlled using GPIO. Linux +USB host driver (bcma-hcd) already supports this by reading vcc-gpio +from DT. Set it properly for all known devices. + +Signed-off-by: Rafał Miłecki +Signed-off-by: Florian Fainelli +--- + +--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts ++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +@@ -139,3 +139,11 @@ + &uart0 { + status = "okay"; + }; ++ ++&usb2 { ++ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; ++}; ++ ++&usb3 { ++ vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>; ++}; +--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts ++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +@@ -24,17 +24,6 @@ + reg = <0x00000000 0x08000000>; + }; + +- axi@18000000 { +- usb3@23000 { +- reg = <0x00023000 0x1000>; +- +- #address-cells = <1>; +- #size-cells = <1>; +- +- vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; +- }; +- }; +- + leds { + compatible = "gpio-leds"; + +@@ -97,3 +86,7 @@ + &uart0 { + status = "okay"; + }; ++ ++&usb3 { ++ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; ++}; +--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts ++++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +@@ -126,3 +126,8 @@ + }; + }; + }; ++ ++ ++&usb2 { ++ vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>; ++}; +--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts ++++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +@@ -106,3 +106,11 @@ + }; + }; + }; ++ ++&usb2 { ++ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; ++}; ++ ++&usb3 { ++ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; ++}; +--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts ++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +@@ -109,3 +109,7 @@ + status = "okay"; + clock-frequency = <125000000>; + }; ++ ++&usb3 { ++ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; ++}; +--- a/arch/arm/boot/dts/bcm5301x.dtsi ++++ b/arch/arm/boot/dts/bcm5301x.dtsi +@@ -207,6 +207,20 @@ + gpio-controller; + #gpio-cells = <2>; + }; ++ ++ usb2: usb2@21000 { ++ reg = <0x00021000 0x1000>; ++ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ }; ++ ++ usb3: usb3@23000 { ++ reg = <0x00023000 0x1000>; ++ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ }; + }; + + lcpll0: lcpll0@1800c100 { diff --git a/target/linux/bcm53xx/patches-4.4/036-ARM-BCM5301X-Enable-earlycon-on-tested-devices.patch b/target/linux/bcm53xx/patches-4.4/036-ARM-BCM5301X-Enable-earlycon-on-tested-devices.patch new file mode 100644 index 0000000000..abcb00fbab --- /dev/null +++ b/target/linux/bcm53xx/patches-4.4/036-ARM-BCM5301X-Enable-earlycon-on-tested-devices.patch @@ -0,0 +1,95 @@ +From 5a6516ff135555aa53c7d156cd3973b826e011f9 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Wed, 6 Apr 2016 18:49:55 +0200 +Subject: [PATCH] ARM: BCM5301X: Enable earlycon on tested devices +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This allows reporting & debugging problems occurring early in the boot +process. + +Signed-off-by: Rafał Miłecki +Acked-by: Hauke Mehrtens +Signed-off-by: Florian Fainelli +--- + +--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts ++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +@@ -17,7 +17,7 @@ + model = "Buffalo WZR-1750DHP (BCM4708)"; + + chosen { +- bootargs = "console=ttyS0,115200"; ++ bootargs = "console=ttyS0,115200 earlycon"; + }; + + memory { +--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts ++++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +@@ -17,7 +17,7 @@ + model = "Luxul XWC-1000 (BCM4708)"; + + chosen { +- bootargs = "console=ttyS0,115200"; ++ bootargs = "console=ttyS0,115200 earlycon"; + }; + + memory { +--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts ++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +@@ -17,7 +17,7 @@ + model = "Netgear R6250 V1 (BCM4708)"; + + chosen { +- bootargs = "console=ttyS0,115200"; ++ bootargs = "console=ttyS0,115200 earlycon"; + }; + + memory { +--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts ++++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +@@ -17,7 +17,7 @@ + model = "SmartRG SR400ac"; + + chosen { +- bootargs = "console=ttyS0,115200"; ++ bootargs = "console=ttyS0,115200 earlycon"; + }; + + memory { +--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts ++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +@@ -17,7 +17,7 @@ + model = "Buffalo WZR-600DHP2 (BCM47081)"; + + chosen { +- bootargs = "console=ttyS0,115200"; ++ bootargs = "console=ttyS0,115200 earlycon"; + }; + + memory { +--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts ++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +@@ -17,7 +17,7 @@ + model = "D-Link DIR-885L"; + + chosen { +- bootargs = "console=ttyS0,115200"; ++ bootargs = "console=ttyS0,115200 earlycon"; + }; + + memory { +--- a/arch/arm/boot/dts/bcm5301x.dtsi ++++ b/arch/arm/boot/dts/bcm5301x.dtsi +@@ -18,6 +18,10 @@ + / { + interrupt-parent = <&gic>; + ++ chosen { ++ stdout-path = &uart0; ++ }; ++ + chipcommonA { + compatible = "simple-bus"; + ranges = <0x00000000 0x18000000 0x00001000>; diff --git a/target/linux/bcm53xx/patches-4.4/130-ARM-BCM5301X-Add-DT-for-D-Link-DIR-885L.patch b/target/linux/bcm53xx/patches-4.4/130-ARM-BCM5301X-Add-DT-for-D-Link-DIR-885L.patch deleted file mode 100644 index c606e93632..0000000000 --- a/target/linux/bcm53xx/patches-4.4/130-ARM-BCM5301X-Add-DT-for-D-Link-DIR-885L.patch +++ /dev/null @@ -1,145 +0,0 @@ -From 3ea03a9d512ca19d59315492230e954a1653ff6e Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Tue, 26 Jan 2016 23:35:16 +0100 -Subject: [PATCH] ARM: BCM5301X: Add DT for D-Link DIR-885L -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -It's device based on BCM47094 which is quite similar to BCM4709 except -for higher CPU frequency. This device has 2 flash memories, it boots -from serial one and stores firmware on NAND. Other than that we define -standard stuff like LEDs, buttons and UART. - -Signed-off-by: Rafał Miłecki -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 111 ++++++++++++++++++++++++++ - 2 files changed, 112 insertions(+) - create mode 100644 arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -76,6 +76,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm4709-buffalo-wxr-1900dhp.dtb \ - bcm4709-netgear-r7000.dtb \ - bcm4709-netgear-r8000.dtb \ -+ bcm47094-dlink-dir-885l.dtb \ - bcm94708.dtb \ - bcm94709.dtb \ - bcm953012k.dtb ---- /dev/null -+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts -@@ -0,0 +1,111 @@ -+/* -+ * Broadcom BCM470X / BCM5301X ARM platform code. -+ * DTS for D-Link DIR-885L -+ * -+ * Copyright (C) 2016 Rafał Miłecki -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+/dts-v1/; -+ -+#include "bcm4708.dtsi" -+#include "bcm5301x-nand-cs0-bch8.dtsi" -+ -+/ { -+ compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708"; -+ model = "D-Link DIR-885L"; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200"; -+ }; -+ -+ memory { -+ reg = <0x00000000 0x08000000>; -+ }; -+ -+ nand: nand@18028000 { -+ nandcs@0 { -+ partition@0 { -+ label = "firmware"; -+ reg = <0x00000000 0x08000000>; -+ }; -+ }; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ power-white { -+ label = "bcm53xx:white:power"; -+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-on"; -+ }; -+ -+ wan-white { -+ label = "bcm53xx:white:wan"; -+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ power-amber { -+ label = "bcm53xx:amber:power"; -+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ wan-amber { -+ label = "bcm53xx:amber:wan"; -+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ usb3-white { -+ label = "bcm53xx:white:usb3"; -+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ 2ghz { -+ label = "bcm53xx:white:2ghz"; -+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ 5ghz { -+ label = "bcm53xx:white:5ghz"; -+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ wps { -+ label = "WPS"; -+ linux,code = ; -+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; -+ }; -+ -+ /* Switch: router / extender */ -+ extender { -+ label = "Extender"; -+ linux,code = ; -+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; -+ }; -+ -+ restart { -+ label = "Reset"; -+ linux,code = ; -+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; -+ -+&uart0 { -+ status = "okay"; -+ clock-frequency = <125000000>; -+}; diff --git a/target/linux/bcm53xx/patches-4.4/321-ARM-BCM5301X-Set-vcc-gpio-for-USB-controllers.patch b/target/linux/bcm53xx/patches-4.4/321-ARM-BCM5301X-Set-vcc-gpio-for-USB-controllers.patch deleted file mode 100644 index 32a9680f2c..0000000000 --- a/target/linux/bcm53xx/patches-4.4/321-ARM-BCM5301X-Set-vcc-gpio-for-USB-controllers.patch +++ /dev/null @@ -1,86 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Subject: [PATCH] ARM: BCM5301X: Set vcc-gpio for USB controllers -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki ---- ---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -@@ -24,6 +24,26 @@ - reg = <0x00000000 0x08000000>; - }; - -+ axi@18000000 { -+ usb2@21000 { -+ reg = <0x00021000 0x1000>; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ usb3@23000 { -+ reg = <0x00023000 0x1000>; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ - spi { - compatible = "spi-gpio"; - num-chipselects = <1>; ---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -@@ -24,6 +24,26 @@ - reg = <0x00000000 0x08000000>; - }; - -+ axi@18000000 { -+ usb2@21000 { -+ reg = <0x00021000 0x1000>; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ usb3@23000 { -+ reg = <0x00023000 0x1000>; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+ - leds { - compatible = "gpio-leds"; - ---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -@@ -24,6 +24,17 @@ - reg = <0x00000000 0x08000000>; - }; - -+ axi@18000000 { -+ usb2@21000 { -+ reg = <0x00021000 0x1000>; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+ - leds { - compatible = "gpio-leds"; - diff --git a/target/linux/bcm53xx/patches-4.4/330-ARM-BCM5301X-Enable-earlyprintk-on-tested-devices.patch b/target/linux/bcm53xx/patches-4.4/330-ARM-BCM5301X-Enable-earlyprintk-on-tested-devices.patch deleted file mode 100644 index b6c9eac6de..0000000000 --- a/target/linux/bcm53xx/patches-4.4/330-ARM-BCM5301X-Enable-earlyprintk-on-tested-devices.patch +++ /dev/null @@ -1,192 +0,0 @@ -From eb1075cc48d3c315c7403822c33da9588ab76492 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Wed, 14 Jan 2015 08:33:25 +0100 -Subject: [PATCH] ARM: BCM5301X: Enable earlyprintk on tested devices -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki ---- - arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 2 +- - arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 2 +- - arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 2 +- - arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 2 +- - 4 files changed, 4 insertions(+), 4 deletions(-) - ---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -@@ -17,7 +17,7 @@ - model = "Buffalo WZR-1750DHP (BCM4708)"; - - chosen { -- bootargs = "console=ttyS0,115200"; -+ bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -@@ -17,7 +17,7 @@ - model = "Netgear R6250 V1 (BCM4708)"; - - chosen { -- bootargs = "console=ttyS0,115200"; -+ bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts -+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts -@@ -17,7 +17,7 @@ - model = "Asus RT-N18U (BCM47081)"; - - chosen { -- bootargs = "console=ttyS0,115200"; -+ bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -@@ -17,7 +17,7 @@ - model = "Buffalo WZR-600DHP2 (BCM47081)"; - - chosen { -- bootargs = "console=ttyS0,115200"; -+ bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts -+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts -@@ -17,7 +17,7 @@ - model = "Buffalo WZR-900DHP (BCM47081)"; - - chosen { -- bootargs = "console=ttyS0,115200"; -+ bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -@@ -17,7 +17,7 @@ - model = "Netgear R8000 (BCM4709)"; - - chosen { -- bootargs = "console=ttyS0,115200"; -+ bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts -+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts -@@ -17,7 +17,7 @@ - model = "Asus RT-AC56U (BCM4708)"; - - chosen { -- bootargs = "console=ttyS0,115200"; -+ bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts -+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts -@@ -17,7 +17,7 @@ - model = "Asus RT-AC68U (BCM4708)"; - - chosen { -- bootargs = "console=ttyS0,115200"; -+ bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -@@ -17,7 +17,7 @@ - model = "Luxul XWC-1000 (BCM4708)"; - - chosen { -- bootargs = "console=ttyS0,115200"; -+ bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -@@ -17,7 +17,7 @@ - model = "Buffalo WXR-1900DHP"; - - chosen { -- bootargs = "console=ttyS0,115200"; -+ bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts -+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts -@@ -17,7 +17,7 @@ - model = "SmartRG SR400ac"; - - chosen { -- bootargs = "console=ttyS0,115200"; -+ bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts -+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts -@@ -17,7 +17,7 @@ - model = "Asus RT-AC87U"; - - chosen { -- bootargs = "console=ttyS0,115200"; -+ bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts -+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts -@@ -17,7 +17,7 @@ - model = "Netgear R7000"; - - chosen { -- bootargs = "console=ttyS0,115200"; -+ bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts -+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts -@@ -17,7 +17,7 @@ - model = "Linksys EA6300 V1"; - - chosen { -- bootargs = "console=ttyS0,115200"; -+ bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts -+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts -@@ -17,7 +17,7 @@ - model = "D-Link DIR-885L"; - - chosen { -- bootargs = "console=ttyS0,115200"; -+ bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts -+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts -@@ -17,7 +17,7 @@ - model = "Netgear R8500"; - - chosen { -- bootargs = "console=ttyS0,115200"; -+ bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { diff --git a/target/linux/bcm53xx/patches-4.4/331-ARM-BCM5301X-Specify-RAM-on-devices-by-including-HIG.patch b/target/linux/bcm53xx/patches-4.4/331-ARM-BCM5301X-Specify-RAM-on-devices-by-including-HIG.patch index b388318470..f2e5a3e2b4 100644 --- a/target/linux/bcm53xx/patches-4.4/331-ARM-BCM5301X-Specify-RAM-on-devices-by-including-HIG.patch +++ b/target/linux/bcm53xx/patches-4.4/331-ARM-BCM5301X-Specify-RAM-on-devices-by-including-HIG.patch @@ -26,7 +26,7 @@ Signed-off-by: Rafał Miłecki + 0x88000000 0x18000000>; }; - axi@18000000 { + spi { --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -21,7 +21,8 @@ @@ -38,7 +38,7 @@ Signed-off-by: Rafał Miłecki + 0x88000000 0x08000000>; }; - axi@18000000 { + leds { --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts @@ -21,7 +21,8 @@ @@ -98,7 +98,7 @@ Signed-off-by: Rafał Miłecki + 0x88000000 0x08000000>; }; - axi@18000000 { + leds { --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts @@ -21,7 +21,8 @@ @@ -134,7 +134,7 @@ Signed-off-by: Rafał Miłecki + 0x88000000 0x18000000>; }; - axi@18000000 { + leds { --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts @@ -21,7 +21,8 @@ diff --git a/target/linux/bcm53xx/patches-4.4/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch b/target/linux/bcm53xx/patches-4.4/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch index f9ca7eb7c1..849537e032 100644 --- a/target/linux/bcm53xx/patches-4.4/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch +++ b/target/linux/bcm53xx/patches-4.4/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch @@ -5,7 +5,7 @@ Signed-off-by: Felix Fietkau --- --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -@@ -123,6 +123,12 @@ +@@ -103,6 +103,12 @@ #address-cells = <1>; #size-cells = <0>; diff --git a/target/linux/bcm53xx/patches-4.4/351-ARM-BCM5301X-Enable-ChipCommon-UART-on-untested-devi.patch b/target/linux/bcm53xx/patches-4.4/351-ARM-BCM5301X-Enable-ChipCommon-UART-on-untested-devi.patch index 240a74bdf4..b5e92c18fc 100644 --- a/target/linux/bcm53xx/patches-4.4/351-ARM-BCM5301X-Enable-ChipCommon-UART-on-untested-devi.patch +++ b/target/linux/bcm53xx/patches-4.4/351-ARM-BCM5301X-Enable-ChipCommon-UART-on-untested-devi.patch @@ -81,26 +81,31 @@ Signed-off-by: Rafał Miłecki +}; --- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -@@ -138,3 +138,8 @@ - }; +@@ -128,6 +128,10 @@ }; }; -+ + +&uart0 { + status = "okay"; + clock-frequency = <125000000>; +}; + + &usb2 { + vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>; --- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -@@ -127,3 +127,8 @@ - }; +@@ -108,6 +108,11 @@ }; }; -+ + +&uart0 { + status = "okay"; + clock-frequency = <125000000>; +}; ++ + &usb2 { + vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; + }; --- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts @@ -104,4 +104,5 @@