From: Pallipadi, Venkatesh Date: Wed, 10 Feb 2010 18:35:31 +0000 (-0800) Subject: ACPI: Be in TS_POLLING state during mwait based C-state entry X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d306ebc28649b89877a22158fe0076f06cc46f60;p=openwrt%2Fstaging%2Fblogic.git ACPI: Be in TS_POLLING state during mwait based C-state entry ACPI deep C-state entry had a long standing bug/missing feature, wherein we were sending resched IPIs when an idle CPU is in mwait based deep C-state. Only mwait based C1 was using the write to the monitored address to wake up mwait'ing CPU. This patch changes the code to retain TS_POLLING bit if we are entering an mwait based deep C-state. The patch has been verified to reduce the number of resched IPIs in general and also improves the performance/power on workloads with low system utilization (i.e., when mwait based deep C-states are being used). Fixes "netperf ~50% regression with 2.6.33-rc1, bisect to 1b9508f" http://marc.info/?l=linux-kernel&m=126441481427331&w=4 Reported-by: Lin Ming Tested-by: Alex Shi Signed-off-by: Venkatesh Pallipadi Signed-off-by: Len Brown --- diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index e88e8ae04fdb..cc978a8c00b7 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -880,12 +880,14 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev, return(acpi_idle_enter_c1(dev, state)); local_irq_disable(); - current_thread_info()->status &= ~TS_POLLING; - /* - * TS_POLLING-cleared state must be visible before we test - * NEED_RESCHED: - */ - smp_mb(); + if (cx->entry_method != ACPI_CSTATE_FFH) { + current_thread_info()->status &= ~TS_POLLING; + /* + * TS_POLLING-cleared state must be visible before we test + * NEED_RESCHED: + */ + smp_mb(); + } if (unlikely(need_resched())) { current_thread_info()->status |= TS_POLLING; @@ -965,12 +967,14 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, } local_irq_disable(); - current_thread_info()->status &= ~TS_POLLING; - /* - * TS_POLLING-cleared state must be visible before we test - * NEED_RESCHED: - */ - smp_mb(); + if (cx->entry_method != ACPI_CSTATE_FFH) { + current_thread_info()->status &= ~TS_POLLING; + /* + * TS_POLLING-cleared state must be visible before we test + * NEED_RESCHED: + */ + smp_mb(); + } if (unlikely(need_resched())) { current_thread_info()->status |= TS_POLLING;