From: York Sun Date: Mon, 10 Jan 2011 12:02:59 +0000 (+0000) Subject: mpc85xx: Adding more registers and options X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d2a9568c57f0aa02f097911d3811e002a1eec1b8;p=project%2Fbcm63xx%2Fu-boot.git mpc85xx: Adding more registers and options This patch exposes more registers which can be used by the DDR drivers or interactive debugging. U-boot doesn't use all the registers in DDRC. When advanced tuning is required, writing to those registers is needed. Add writing to cdr1, cdr2, err_disable, err_int_en and debug registers Add options to override rcw, address parity to RDIMMs. Use array for debug registers. Signed-off-by: York Sun Signed-off-by: Kumar Gala --- diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c index e46dcb7047..4e768d39ba 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c +++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c @@ -1,5 +1,5 @@ /* - * Copyright 2008 Freescale Semiconductor, Inc. + * Copyright 2008-2011 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -9,6 +9,7 @@ #include #include #include +#include #if (CONFIG_CHIP_SELECTS_PER_CTRL > 4) #error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL @@ -79,6 +80,12 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr); out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1); out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2); + out_be32(&ddr->ddr_cdr1, regs->ddr_cdr1); + out_be32(&ddr->ddr_cdr2, regs->ddr_cdr2); + out_be32(&ddr->err_disable, regs->err_disable); + out_be32(&ddr->err_int_en, regs->err_int_en); + for (i = 0; i < 32; i++) + out_be32(&ddr->debug[i], regs->debug[i]); /* Set, but do not enable the memory */ temp_sdram_cfg = regs->ddr_sdram_cfg; @@ -93,8 +100,7 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, if ((((in_be32(&ddr->sdram_cfg) >> 24) & 0x7) == SDRAM_TYPE_DDR2) && in_be32(&ddr->sdram_cfg) & 0x80000) { /* set DEBUG_1[31] */ - u32 temp = in_be32(&ddr->debug_1); - out_be32(&ddr->debug_1, temp | 1); + setbits_be32(&ddr->debug[0], 1); } #endif diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h index 3de2113bda..04aeb40753 100644 --- a/arch/powerpc/include/asm/fsl_ddr_sdram.h +++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h @@ -120,6 +120,11 @@ typedef struct fsl_ddr_cfg_regs_s { unsigned int ddr_sdram_rcw_1; unsigned int ddr_sdram_rcw_2; unsigned int ddr_eor; + unsigned int ddr_cdr1; + unsigned int ddr_cdr2; + unsigned int err_disable; + unsigned int err_int_en; + unsigned int debug[32]; } fsl_ddr_cfg_regs_t; typedef struct memctl_options_partial_s { @@ -175,6 +180,7 @@ typedef struct memctl_options_s { /* mirrior DIMMs for DDR3 */ unsigned int mirrored_dimm; unsigned int quad_rank_present; + unsigned int ap_en; /* address parity enable for RDIMM */ /* Global Timing Parameters */ unsigned int cas_latency_override; @@ -210,6 +216,12 @@ typedef struct memctl_options_s { unsigned int zq_en; /* Write leveling */ unsigned int wrlvl_en; + /* RCW override for RDIMM */ + unsigned int rcw_override; + unsigned int rcw_1; + unsigned int rcw_2; + /* control register 1 */ + unsigned int ddr_cdr1; } memctl_options_t; extern phys_size_t fsl_ddr_sdram(void); diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 93a9e6ceca..6bd83ba166 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -222,25 +222,8 @@ typedef struct ccsr_ddr { u32 capture_ext_address; /* Error Extended Addr Capture */ u32 err_sbe; /* Single-Bit ECC Error Management */ u8 res11[164]; - u32 debug_1; - u32 debug_2; - u32 debug_3; - u32 debug_4; - u32 debug_5; - u32 debug_6; - u32 debug_7; - u32 debug_8; - u32 debug_9; - u32 debug_10; - u32 debug_11; - u32 debug_12; - u32 debug_13; - u32 debug_14; - u32 debug_15; - u32 debug_16; - u32 debug_17; - u32 debug_18; - u8 res12[184]; + u32 debug[32]; /* debug_1 to debug_32 */ + u8 res12[128]; } ccsr_ddr_t; #define DDR_EOR_RD_BDW_OPT_DIS 0x80000000 /* Read BDW Opt. disable */ diff --git a/board/tqc/tqm85xx/sdram.c b/board/tqc/tqm85xx/sdram.c index b2d3185351..39a9e2131a 100644 --- a/board/tqc/tqm85xx/sdram.c +++ b/board/tqc/tqm85xx/sdram.c @@ -240,7 +240,7 @@ static phys_size_t sdram_setup(int casl) * 4. Before DDR_SDRAM_CFG[MEM_EN] set, write D3[21] to disable data * training */ - ddr->debug_3 |= 0x00000400; + ddr->debug[2] |= 0x00000400; /* * 5. Wait 200 micro-seconds @@ -282,18 +282,18 @@ static phys_size_t sdram_setup(int casl) /* * 8. Clear D3[21] to re-enable data training */ - ddr->debug_3 &= ~0x00000400; + ddr->debug[2] &= ~0x00000400; /* * 9. Set D2(21) to force data training to run */ - ddr->debug_2 |= 0x00000400; + ddr->debug[1] |= 0x00000400; /* * 10. Poll on D2[21] until it is cleared by hardware */ asm ("sync;isync;msync"); - while (ddr->debug_2 & 0x00000400) + while (ddr->debug[1] & 0x00000400) asm ("eieio"); /*