From: Maxime Chevallier Date: Thu, 28 Feb 2019 21:14:33 +0000 (+0100) Subject: net: dsa: mv88e6xxx: power serdes on/off for 10G interfaces on 6390X X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d235c48b40d399328585a68f3f9bf7cc3062d586;p=openwrt%2Fstaging%2Fblogic.git net: dsa: mv88e6xxx: power serdes on/off for 10G interfaces on 6390X Upon setting the cmode on 6390 and 6390X, the associated serdes interfaces must be powered off/on. Both 6390X and 6390 share code to do so, but it currently uses the 6390 specific helper mv88e6390_serdes_power() to disable and enable the serdes interface. This call will fail silently on 6390X when trying so set a 10G interface such as XAUI or RXAUI, since mv88e6390_serdes_power() internally grabs the lane number based on modes supported by the 6390, and returns 0 when getting -ENODEV as a lane number. Using mv88e6390x_serdes_power() should be safe here, since we explicitly rule-out all ports but the 9 and 10, and because modes supported by 6390 ports 9 and 10 are a subset of those supported on 6390X. This was tested on 6390X using RXAUI mode. Fixes: 364e9d7776a3 ("net: dsa: mv88e6xxx: Power on/off SERDES on cmode change") Signed-off-by: Maxime Chevallier Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- diff --git a/drivers/net/dsa/mv88e6xxx/port.c b/drivers/net/dsa/mv88e6xxx/port.c index ebd26b6a93e6..4b02c96f6786 100644 --- a/drivers/net/dsa/mv88e6xxx/port.c +++ b/drivers/net/dsa/mv88e6xxx/port.c @@ -408,7 +408,7 @@ int mv88e6390x_port_set_cmode(struct mv88e6xxx_chip *chip, int port, return err; } - err = mv88e6390_serdes_power(chip, port, false); + err = mv88e6390x_serdes_power(chip, port, false); if (err) return err; @@ -424,7 +424,7 @@ int mv88e6390x_port_set_cmode(struct mv88e6xxx_chip *chip, int port, if (err) return err; - err = mv88e6390_serdes_power(chip, port, true); + err = mv88e6390x_serdes_power(chip, port, true); if (err) return err;