From: Birger Koblitz Date: Wed, 19 Jan 2022 14:38:32 +0000 (+0100) Subject: realtek: Copy all BPDUs to the kernel X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d22923be668c07d4f732c4e6a51025e35193993b;p=openwrt%2Fstaging%2Fneocturne.git realtek: Copy all BPDUs to the kernel In order to receive STP information at the kernel level, we make sure that all Bridge Protocol Data Units are copied to the CPU-Port. Signed-off-by: Sebastian Gottschall Signed-off-by: Birger Koblitz --- diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/dsa.c b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/dsa.c index d8fabdc041..e81f7f6405 100644 --- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/dsa.c +++ b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/dsa.c @@ -154,6 +154,14 @@ static void rtl83xx_vlan_setup(struct rtl838x_switch_priv *priv) priv->r->vlan_fwd_on_inner(i, true); } +static void rtl83xx_setup_bpdu_traps(struct rtl838x_switch_priv *priv) +{ + int i; + + for (i = 0; i < priv->cpu_port; i++) + priv->r->set_receive_management_action(i, BPDU, COPY2CPU); +} + static int rtl83xx_setup(struct dsa_switch *ds) { int i; @@ -191,6 +199,8 @@ static int rtl83xx_setup(struct dsa_switch *ds) rtl83xx_vlan_setup(priv); + rtl83xx_setup_bpdu_traps(priv); + ds->configure_vlan_while_not_filtering = true; priv->r->l2_learning_setup(); diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.c b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.c index 8e48cbf644..cdf1766778 100644 --- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.c +++ b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.c @@ -1673,6 +1673,26 @@ void rtl838x_set_distribution_algorithm(int group, int algoidx, u32 algomsk) sw_w32(algomsk, RTL838X_TRK_HASH_CTRL + (algoidx << 2)); } +void rtl838x_set_receive_management_action(int port, rma_ctrl_t type, action_type_t action) +{ + switch(type) { + case BPDU: + sw_w32_mask(3 << ((port & 0xf) << 1), (action & 0x3) << ((port & 0xf) << 1), + RTL838X_RMA_BPDU_CTRL + ((port >> 4) << 2)); + break; + case PTP: + sw_w32_mask(3 << ((port & 0xf) << 1), (action & 0x3) << ((port & 0xf) << 1), + RTL838X_RMA_PTP_CTRL + ((port >> 4) << 2)); + break; + case LLTP: + sw_w32_mask(3 << ((port & 0xf) << 1), (action & 0x3) << ((port & 0xf) << 1), + RTL838X_RMA_LLTP_CTRL + ((port >> 4) << 2)); + break; + default: + break; + } +} + const struct rtl838x_reg rtl838x_reg = { .mask_port_reg_be = rtl838x_mask_port_reg, .set_port_reg_be = rtl838x_set_port_reg, @@ -1756,6 +1776,7 @@ const struct rtl838x_reg rtl838x_reg = { .route_write = rtl838x_route_write, .l3_setup = rtl838x_l3_setup, .set_distribution_algorithm = rtl838x_set_distribution_algorithm, + .set_receive_management_action = rtl838x_set_receive_management_action, }; irqreturn_t rtl838x_switch_irq(int irq, void *dev_id) diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.h b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.h index 1306e3a354..1b671264dc 100644 --- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.h +++ b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.h @@ -11,8 +11,10 @@ #define RTL838X_MAC_PORT_CTRL(port) (0xd560 + (((port) << 7))) #define RTL839X_MAC_PORT_CTRL(port) (0x8004 + (((port) << 7))) #define RTL930X_MAC_PORT_CTRL(port) (0x3260 + (((port) << 6))) +#define RTL931X_MAC_PORT_CTRL (0x6004) + #define RTL930X_MAC_L2_PORT_CTRL(port) (0x3268 + (((port) << 6))) -#define RTL931X_MAC_PORT_CTRL(port) (0x6004 + (((port) << 7))) +#define RTL931X_MAC_L2_PORT_CTRL (0x6000) #define RTL838X_RST_GLB_CTRL_0 (0x003c) @@ -132,7 +134,7 @@ #define RTL838X_MAC_LINK_SPD_STS(p) (0xa190 + (((p >> 4) << 2))) #define RTL839X_MAC_LINK_SPD_STS(p) (0x03a0 + (((p >> 4) << 2))) #define RTL930X_MAC_LINK_SPD_STS(p) (0xCB18 + (((p >> 3) << 2))) -#define RTL931X_MAC_LINK_SPD_STS(p) (0x0ED0 + (((p >> 3) << 2))) +#define RTL931X_MAC_LINK_SPD_STS (0x0ED0) #define RTL838X_MAC_LINK_DUP_STS (0xa19c) #define RTL839X_MAC_LINK_DUP_STS (0x03b0) #define RTL930X_MAC_LINK_DUP_STS (0xCB28) @@ -245,15 +247,11 @@ #define RTL930X_L2_PORT_SABLK_CTRL (0x905c) #define RTL930X_L2_PORT_DABLK_CTRL (0x9060) -#define RTL838X_RMA_BPDU_FLD_PMSK (0x4348) -#define RTL930X_RMA_BPDU_FLD_PMSK (0x9F18) -#define RTL931X_RMA_BPDU_FLD_PMSK (0x8950) -#define RTL839X_RMA_BPDU_FLD_PMSK (0x125C) - #define RTL838X_L2_PORT_LM_ACT(p) (0x3208 + ((p) << 2)) #define RTL838X_VLAN_PORT_FWD (0x3A78) #define RTL839X_VLAN_PORT_FWD (0x27AC) #define RTL930X_VLAN_PORT_FWD (0x834C) +#define RTL931X_VLAN_PORT_FWD (0x95CC) #define RTL838X_VLAN_FID_CTRL (0x3aa8) /* Port Mirroring */ @@ -370,10 +368,76 @@ #define RTL838X_ATK_PRVNT_STS (0x5B1C) /* 802.1X */ +#define RTL838X_RMA_BPDU_FLD_PMSK (0x4348) +#define RTL930X_RMA_BPDU_FLD_PMSK (0x9F18) +#define RTL931X_RMA_BPDU_FLD_PMSK (0x8950) +#define RTL839X_RMA_BPDU_FLD_PMSK (0x125C) + +#define RTL838X_SPCL_TRAP_CTRL (0x6980) #define RTL838X_SPCL_TRAP_EAPOL_CTRL (0x6988) -#define RTL839X_SPCL_TRAP_EAPOL_CTRL (0x105C) #define RTL838X_SPCL_TRAP_ARP_CTRL (0x698C) +#define RTL838X_SPCL_TRAP_IGMP_CTRL (0x6984) +#define RTL838X_SPCL_TRAP_IPV6_CTRL (0x6994) +#define RTL838X_SPCL_TRAP_SWITCH_MAC_CTRL (0x6998) + +#define RTL839X_SPCL_TRAP_CTRL (0x1054) +#define RTL839X_SPCL_TRAP_EAPOL_CTRL (0x105C) #define RTL839X_SPCL_TRAP_ARP_CTRL (0x1060) +#define RTL839X_SPCL_TRAP_IGMP_CTRL (0x1058) +#define RTL839X_SPCL_TRAP_IPV6_CTRL (0x1064) +#define RTL839X_SPCL_TRAP_SWITCH_MAC_CTRL (0x1068) +#define RTL839X_SPCL_TRAP_SWITCH_IPV4_ADDR_CTRL (0x106C) +#define RTL839X_SPCL_TRAP_CRC_CTRL (0x1070) +/* special port action controls */ +/* + values: + 0 = FORWARD (default) + 1 = DROP + 2 = TRAP2CPU + 3 = FLOOD IN ALL PORT + + Register encoding. + offset = CTRL + (port >> 4) << 2 + value/mask = 3 << ((port&0xF) << 1) +*/ + +typedef enum { + BPDU = 0, + PTP, + PTP_UDP, + PTP_ETH2, + LLTP, + EAPOL, + GRATARP, +} rma_ctrl_t; + +typedef enum { + FORWARD = 0, + DROP, + TRAP2CPU, + FLOODALL, + TRAP2MASTERCPU, + COPY2CPU, +} action_type_t; + +#define RTL838X_RMA_BPDU_CTRL (0x4330) +#define RTL839X_RMA_BPDU_CTRL (0x122C) +#define RTL930X_RMA_BPDU_CTRL (0x9E7C) +#define RTL931X_RMA_BPDU_CTRL (0x881C) + +#define RTL838X_RMA_PTP_CTRL (0x4338) +#define RTL839X_RMA_PTP_CTRL (0x123C) +#define RTL930X_RMA_PTP_CTRL (0x9E88) +#define RTL931X_RMA_PTP_CTRL (0x8834) + +#define RTL838X_RMA_LLTP_CTRL (0x4340) +#define RTL839X_RMA_LLTP_CTRL (0x124C) +#define RTL930X_RMA_LLTP_CTRL (0x9EFC) +#define RTL931X_RMA_LLTP_CTRL (0x8918) + +#define RTL930X_RMA_EAPOL_CTRL (0x9F08) +#define RTL931X_RMA_EAPOL_CTRL (0x8930) +#define RTL931X_TRAP_ARP_GRAT_PORT_ACT (0x8C04) /* QoS */ #define RTL838X_QM_INTPRI2QID_CTRL (0x5F00) @@ -414,23 +478,37 @@ #define RTL838X_METER_GLB_CTRL (0x4B08) #define RTL839X_METER_GLB_CTRL (0x1300) #define RTL930X_METER_GLB_CTRL (0xa0a0) +#define RTL931X_METER_GLB_CTRL (0x411C) + #define RTL839X_ACL_CTRL (0x1288) + #define RTL838X_ACL_BLK_LOOKUP_CTRL (0x6100) #define RTL839X_ACL_BLK_LOOKUP_CTRL (0x1280) #define RTL930X_PIE_BLK_LOOKUP_CTRL (0xa5a0) +#define RTL931X_PIE_BLK_LOOKUP_CTRL (0x4180) + #define RTL838X_ACL_BLK_PWR_CTRL (0x6104) #define RTL839X_PS_ACL_PWR_CTRL (0x049c) + #define RTL838X_ACL_BLK_TMPLTE_CTRL(block) (0x6108 + ((block) << 2)) #define RTL839X_ACL_BLK_TMPLTE_CTRL(block) (0x128c + ((block) << 2)) #define RTL930X_PIE_BLK_TMPLTE_CTRL(block) (0xa624 + ((block) << 2)) +#define RTL931X_PIE_BLK_TMPLTE_CTRL(block) (0x4214 + ((block) << 2)) + #define RTL838X_ACL_BLK_GROUP_CTRL (0x615C) #define RTL839X_ACL_BLK_GROUP_CTRL (0x12ec) + #define RTL838X_ACL_CLR_CTRL (0x6168) #define RTL839X_ACL_CLR_CTRL (0x12fc) #define RTL930X_PIE_CLR_CTRL (0xa66c) +#define RTL931X_PIE_CLR_CTRL (0x42D8) + #define RTL838X_DMY_REG27 (0x3378) + #define RTL838X_ACL_PORT_LOOKUP_CTRL(p) (0x616C + (((p) << 2))) #define RTL930X_ACL_PORT_LOOKUP_CTRL(p) (0xA784 + (((p) << 2))) +#define RTL931X_ACL_PORT_LOOKUP_CTRL(p) (0x44F8 + (((p) << 2))) + #define RTL930X_PIE_BLK_PHASE_CTRL (0xA5A4) // PIE actions @@ -477,6 +555,7 @@ #define PIE_BLOCK_SIZE 128 #define MAX_PIE_ENTRIES (18 * PIE_BLOCK_SIZE) #define N_FIXED_FIELDS 12 +#define N_FIXED_FIELDS_RTL931X 14 #define MAX_COUNTERS 2048 #define MAX_ROUTES 512 #define MAX_HOST_ROUTES 1536 @@ -929,6 +1008,7 @@ struct rtl838x_reg { void (*set_l3_router_mac)(u32 idx, struct rtl93xx_rt_mac *m); void (*set_l3_egress_intf)(int idx, struct rtl838x_l3_intf *intf); void (*set_distribution_algorithm)(int group, int algoidx, u32 algomask); + void (*set_receive_management_action)(int port, rma_ctrl_t type, action_type_t action); }; struct rtl838x_switch_priv { diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl839x.c b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl839x.c index dde1b5bebc..7b838cb76b 100644 --- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl839x.c +++ b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl839x.c @@ -1797,6 +1797,26 @@ void rtl839x_set_distribution_algorithm(int group, int algoidx, u32 algomsk) sw_w32(algomsk, RTL839X_TRK_HASH_CTRL + (algoidx << 2)); } +void rtl839x_set_receive_management_action(int port, rma_ctrl_t type, action_type_t action) +{ + switch(type) { + case BPDU: + sw_w32_mask(3 << ((port & 0xf) << 1), (action & 0x3) << ((port & 0xf) << 1), + RTL839X_RMA_BPDU_CTRL + ((port >> 4) << 2)); + break; + case PTP: + sw_w32_mask(3 << ((port & 0xf) << 1), (action & 0x3) << ((port & 0xf) << 1), + RTL839X_RMA_PTP_CTRL + ((port >> 4) << 2)); + break; + case LLTP: + sw_w32_mask(3 << ((port & 0xf) << 1), (action & 0x3) << ((port & 0xf) << 1), + RTL839X_RMA_LLTP_CTRL + ((port >> 4) << 2)); + break; + default: + break; + } +} + const struct rtl838x_reg rtl839x_reg = { .mask_port_reg_be = rtl839x_mask_port_reg_be, .set_port_reg_be = rtl839x_set_port_reg_be, @@ -1880,4 +1900,5 @@ const struct rtl838x_reg rtl839x_reg = { .route_write = rtl839x_route_write, .l3_setup = rtl839x_l3_setup, .set_distribution_algorithm = rtl839x_set_distribution_algorithm, + .set_receive_management_action = rtl839x_set_receive_management_action, };