From: Linus Torvalds Date: Wed, 8 May 2019 17:12:46 +0000 (-0700) Subject: Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d1cd7c85f9e29740fddec6f25d8bf061937bf58d;p=openwrt%2Fstaging%2Fblogic.git Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: qla2xxx, qedf, smartpqi, hpsa, lpfc, ufs, mpt3sas, ibmvfc and hisi_sas. Plus number of minor changes, spelling fixes and other trivia" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (298 commits) scsi: qla2xxx: Avoid that lockdep complains about unsafe locking in tcm_qla2xxx_close_session() scsi: qla2xxx: Avoid that qlt_send_resp_ctio() corrupts memory scsi: qla2xxx: Fix hardirq-unsafe locking scsi: qla2xxx: Complain loudly about reference count underflow scsi: qla2xxx: Use __le64 instead of uint32_t[2] for sending DMA addresses to firmware scsi: qla2xxx: Introduce the dsd32 and dsd64 data structures scsi: qla2xxx: Check the size of firmware data structures at compile time scsi: qla2xxx: Pass little-endian values to the firmware scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands scsi: qla2xxx: Use an on-stack completion in qla24xx_control_vp() scsi: qla2xxx: Make qla24xx_async_abort_cmd() static scsi: qla2xxx: Remove unnecessary locking from the target code scsi: qla2xxx: Remove qla_tgt_cmd.released scsi: qla2xxx: Complain if a command is released that is owned by the firmware scsi: qla2xxx: target: Fix offline port handling and host reset handling scsi: qla2xxx: Fix abort handling in tcm_qla2xxx_write_pending() scsi: qla2xxx: Fix error handling in qlt_alloc_qfull_cmd() scsi: qla2xxx: Simplify qlt_send_term_imm_notif() scsi: qla2xxx: Fix use-after-free issues in qla2xxx_qpair_sp_free_dma() scsi: qla2xxx: Fix a qla24xx_enable_msix() error path ... --- d1cd7c85f9e29740fddec6f25d8bf061937bf58d diff --cc drivers/scsi/ufs/ufs-qcom.c index de9d3f56b58c,a6b6f6eb9061..ea7219407309 --- a/drivers/scsi/ufs/ufs-qcom.c +++ b/drivers/scsi/ufs/ufs-qcom.c @@@ -558,126 -578,23 +558,28 @@@ static int ufs_qcom_resume(struct ufs_h struct phy *phy = host->generic_phy; int err; - err = phy_power_on(phy); - if (err) { - dev_err(hba->dev, "%s: failed enabling regs, err = %d\n", - __func__, err); - goto out; - } + if (ufs_qcom_is_link_off(hba)) { + err = phy_power_on(phy); + if (err) { + dev_err(hba->dev, "%s: failed PHY power on: %d\n", + __func__, err); + return err; + } - err = ufs_qcom_enable_lane_clks(host); - if (err) - goto out; + err = ufs_qcom_enable_lane_clks(host); + if (err) + return err; - hba->is_sys_suspended = false; + } else if (!ufs_qcom_is_link_active(hba)) { + err = ufs_qcom_enable_lane_clks(host); + if (err) + return err; + } -out: - return err; + hba->is_sys_suspended = false; + return 0; } - struct ufs_qcom_dev_params { - u32 pwm_rx_gear; /* pwm rx gear to work in */ - u32 pwm_tx_gear; /* pwm tx gear to work in */ - u32 hs_rx_gear; /* hs rx gear to work in */ - u32 hs_tx_gear; /* hs tx gear to work in */ - u32 rx_lanes; /* number of rx lanes */ - u32 tx_lanes; /* number of tx lanes */ - u32 rx_pwr_pwm; /* rx pwm working pwr */ - u32 tx_pwr_pwm; /* tx pwm working pwr */ - u32 rx_pwr_hs; /* rx hs working pwr */ - u32 tx_pwr_hs; /* tx hs working pwr */ - u32 hs_rate; /* rate A/B to work in HS */ - u32 desired_working_mode; - }; - - static int ufs_qcom_get_pwr_dev_param(struct ufs_qcom_dev_params *qcom_param, - struct ufs_pa_layer_attr *dev_max, - struct ufs_pa_layer_attr *agreed_pwr) - { - int min_qcom_gear; - int min_dev_gear; - bool is_dev_sup_hs = false; - bool is_qcom_max_hs = false; - - if (dev_max->pwr_rx == FAST_MODE) - is_dev_sup_hs = true; - - if (qcom_param->desired_working_mode == FAST) { - is_qcom_max_hs = true; - min_qcom_gear = min_t(u32, qcom_param->hs_rx_gear, - qcom_param->hs_tx_gear); - } else { - min_qcom_gear = min_t(u32, qcom_param->pwm_rx_gear, - qcom_param->pwm_tx_gear); - } - - /* - * device doesn't support HS but qcom_param->desired_working_mode is - * HS, thus device and qcom_param don't agree - */ - if (!is_dev_sup_hs && is_qcom_max_hs) { - pr_err("%s: failed to agree on power mode (device doesn't support HS but requested power is HS)\n", - __func__); - return -ENOTSUPP; - } else if (is_dev_sup_hs && is_qcom_max_hs) { - /* - * since device supports HS, it supports FAST_MODE. - * since qcom_param->desired_working_mode is also HS - * then final decision (FAST/FASTAUTO) is done according - * to qcom_params as it is the restricting factor - */ - agreed_pwr->pwr_rx = agreed_pwr->pwr_tx = - qcom_param->rx_pwr_hs; - } else { - /* - * here qcom_param->desired_working_mode is PWM. - * it doesn't matter whether device supports HS or PWM, - * in both cases qcom_param->desired_working_mode will - * determine the mode - */ - agreed_pwr->pwr_rx = agreed_pwr->pwr_tx = - qcom_param->rx_pwr_pwm; - } - - /* - * we would like tx to work in the minimum number of lanes - * between device capability and vendor preferences. - * the same decision will be made for rx - */ - agreed_pwr->lane_tx = min_t(u32, dev_max->lane_tx, - qcom_param->tx_lanes); - agreed_pwr->lane_rx = min_t(u32, dev_max->lane_rx, - qcom_param->rx_lanes); - - /* device maximum gear is the minimum between device rx and tx gears */ - min_dev_gear = min_t(u32, dev_max->gear_rx, dev_max->gear_tx); - - /* - * if both device capabilities and vendor pre-defined preferences are - * both HS or both PWM then set the minimum gear to be the chosen - * working gear. - * if one is PWM and one is HS then the one that is PWM get to decide - * what is the gear, as it is the one that also decided previously what - * pwr the device will be configured to. - */ - if ((is_dev_sup_hs && is_qcom_max_hs) || - (!is_dev_sup_hs && !is_qcom_max_hs)) - agreed_pwr->gear_rx = agreed_pwr->gear_tx = - min_t(u32, min_dev_gear, min_qcom_gear); - else if (!is_dev_sup_hs) - agreed_pwr->gear_rx = agreed_pwr->gear_tx = min_dev_gear; - else - agreed_pwr->gear_rx = agreed_pwr->gear_tx = min_qcom_gear; - - agreed_pwr->hs_rate = qcom_param->hs_rate; - return 0; - } - #ifdef CONFIG_MSM_BUS_SCALING static int ufs_qcom_get_bus_vote(struct ufs_qcom_host *host, const char *speed_mode)