From: Gabor Juhos <juhosg@openwrt.org>
Date: Thu, 20 Feb 2014 17:07:51 +0000 (+0000)
Subject: ar71xx: Add support for MikroTik RB951Ui-2HnD
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d19b868b12a3d76addbf0d16a854f2d5976f7608;p=openwrt%2Fstaging%2Fluka.git

ar71xx: Add support for MikroTik RB951Ui-2HnD

I noticed that the patch at http://patchwork.openwrt.org/patch/4017/
for adding support for the MikroTik RouterBOARD 951Ui-2HnD had been
abandoned because it wasn't generated and sent to the mailing list
correctly and doesn't apply as a result.  I have cleaned up this patch.

When testing this on real hardware, I also noticed that wireless didn't
work, so this patch fixes that as well.

This patch applies cleanly to SVN 39392.

Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com>
Patchwork: http://patchwork.openwrt.org/patch/4773/
[juhosg:
  - drop the 'rb951ui_wlan_init' function and rework the code to
    use the recently introduced rb95x_wlan_init function instead,
  - fix GPIO number of the port5 LED,
  - rename LEDs according to the standard LED naming conventions,
    and use 'rb' prefix in the names]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39641
---

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c
index 8213c47c10..f6de80ab81 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c
@@ -36,6 +36,7 @@
 #include "dev-wmac.h"
 #include "machtypes.h"
 #include "routerboot.h"
+#include "dev-leds-gpio.h"
 
 #define RB95X_GPIO_NAND_NCE	14
 
@@ -58,6 +59,38 @@ static struct mtd_partition rb95x_nand_partitions[] = {
 	},
 };
 
+static struct gpio_led rb951ui_leds_gpio[] __initdata = {
+	{
+		.name		= "rb:green:wlan",
+		.gpio		= 11,
+		.active_low	= 1,
+	}, {
+		.name		= "rb:green:act",
+		.gpio		= 3,
+		.active_low	= 1,
+	}, {
+		.name		= "rb:green:port1",
+		.gpio		= 13,
+		.active_low	= 1,
+	}, {
+		.name		= "rb:green:port2",
+		.gpio		= 12,
+		.active_low	= 1,
+	}, {
+		.name		= "rb:green:port3",
+		.gpio		= 4,
+		.active_low	= 1,
+	}, {
+		.name		= "rb:green:port4",
+		.gpio		= 21,
+		.active_low	= 1,
+	}, {
+		.name		= "rb:green:port5",
+		.gpio		= 16,
+		.active_low	= 1,
+	}
+};
+
 static struct ar8327_pad_cfg rb95x_ar8327_pad0_cfg = {
 	.mode = AR8327_PAD_MAC_RGMII,
 	.txclk_delay_en = true,
@@ -157,6 +190,14 @@ static int __init rb95x_setup(void)
 
 	rb95x_nand_init();
 
+	return 0;
+}
+
+static void __init rb951g_setup(void)
+{
+	if (rb95x_setup())
+		return;
+
 	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
 				   AR934X_ETH_CFG_SW_ONLY_MODE);
 
@@ -171,17 +212,47 @@ static int __init rb95x_setup(void)
 
 	ath79_register_eth(0);
 
-	return 0;
+	rb95x_wlan_init();
+	ath79_register_usb();
 }
 
-static void __init rb951g_setup(void)
+MIPS_MACHINE(ATH79_MACH_RB_951G, "951G", "MikroTik RouterBOARD 951G-2HnD",
+	     rb951g_setup);
+
+static void __init rb951ui_setup(void)
 {
 	if (rb95x_setup())
 		return;
 
+	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
+
+	ath79_register_mdio(1, 0x0);
+
+	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+
+	ath79_switch_data.phy4_mii_en = 1;
+	ath79_switch_data.phy_poll_mask = BIT(4);
+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+	ath79_eth0_data.phy_mask = BIT(4);
+	ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
+	ath79_register_eth(0);
+
+	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+	ath79_register_eth(1);
+
+	gpio_request_one(20, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+			 "USB power");
+
+	gpio_request_one(2, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+			 "POE power");
+
 	rb95x_wlan_init();
 	ath79_register_usb();
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(rb951ui_leds_gpio),
+				 rb951ui_leds_gpio);
 }
 
-MIPS_MACHINE(ATH79_MACH_RB_951G, "951G", "MikroTik RouterBOARD 951G-2HnD",
-	     rb951g_setup);
+MIPS_MACHINE(ATH79_MACH_RB_951U, "951HnD", "MikroTik RouterBOARD 951Ui-2HnD",
+	     rb951ui_setup);
diff --git a/target/linux/ar71xx/patches-3.10/704-MIPS-ath79-add-RB951Ui-2HnD-support.patch b/target/linux/ar71xx/patches-3.10/704-MIPS-ath79-add-RB951Ui-2HnD-support.patch
new file mode 100644
index 0000000000..509c947cfc
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/704-MIPS-ath79-add-RB951Ui-2HnD-support.patch
@@ -0,0 +1,10 @@
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -81,6 +81,7 @@ enum ath79_mach_type {
+ 	ATH79_MACH_RB_751,		/* MikroTik RouterBOARD 751 */
+ 	ATH79_MACH_RB_751G,		/* Mikrotik RouterBOARD 751G */
+ 	ATH79_MACH_RB_951G,		/* Mikrotik RouterBOARD 951G */
++	ATH79_MACH_RB_951U,		/* Mikrotik RouterBOARD 951Ui-2HnD */
+ 	ATH79_MACH_RB_2011G,		/* Mikrotik RouterBOARD 2011UAS-2HnD */
+ 	ATH79_MACH_RB_2011L,		/* Mikrotik RouterBOARD 2011L */
+ 	ATH79_MACH_RB_2011US,		/* Mikrotik RouterBOARD 2011UAS */