From: Himanshu Madhani Date: Fri, 8 Mar 2013 09:53:50 +0000 (+0000) Subject: qlcnic: Enable LED test support for 83xx adapter X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d16951d94aabb72245319679036125b8d7efead9;p=openwrt%2Fstaging%2Fblogic.git qlcnic: Enable LED test support for 83xx adapter o Add support for LED test on 83xx series adapters Signed-off-by: Himanshu Madhani Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index 41c02ba7648c..c08fa20dd5f0 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -1432,6 +1432,51 @@ mbx_err: } } +int qlcnic_83xx_set_led(struct net_device *netdev, + enum ethtool_phys_id_state state) +{ + struct qlcnic_adapter *adapter = netdev_priv(netdev); + int err = -EIO, active = 1; + + if (adapter->ahw->op_mode == QLCNIC_NON_PRIV_FUNC) { + netdev_warn(netdev, + "LED test is not supported in non-privileged mode\n"); + return -EOPNOTSUPP; + } + + switch (state) { + case ETHTOOL_ID_ACTIVE: + if (test_and_set_bit(__QLCNIC_LED_ENABLE, &adapter->state)) + return -EBUSY; + + if (test_bit(__QLCNIC_RESETTING, &adapter->state)) + break; + + err = qlcnic_83xx_config_led(adapter, active, 0); + if (err) + netdev_err(netdev, "Failed to set LED blink state\n"); + break; + case ETHTOOL_ID_INACTIVE: + active = 0; + + if (test_bit(__QLCNIC_RESETTING, &adapter->state)) + break; + + err = qlcnic_83xx_config_led(adapter, active, 0); + if (err) + netdev_err(netdev, "Failed to reset LED blink state\n"); + break; + + default: + return -EINVAL; + } + + if (!active || err) + clear_bit(__QLCNIC_LED_ENABLE, &adapter->state); + + return err; +} + void qlcnic_83xx_register_nic_idc_func(struct qlcnic_adapter *adapter, int enable) { diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h index 94e3ee0a7aa6..648a73f904ee 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h @@ -449,5 +449,6 @@ int qlcnic_83xx_get_regs_len(struct qlcnic_adapter *); int qlcnic_83xx_get_registers(struct qlcnic_adapter *, u32 *); int qlcnic_83xx_loopback_test(struct net_device *, u8); int qlcnic_83xx_interrupt_test(struct net_device *); +int qlcnic_83xx_set_led(struct net_device *, enum ethtool_phys_id_state); int qlcnic_83xx_flash_test(struct qlcnic_adapter *); #endif diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c index 5641f8ec49ab..ba1502acc84a 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c @@ -1176,7 +1176,8 @@ static int qlcnic_set_led(struct net_device *dev, int err = -EIO, active = 1; if (qlcnic_83xx_check(adapter)) - return -EOPNOTSUPP; + return qlcnic_83xx_set_led(dev, state); + if (adapter->ahw->op_mode == QLCNIC_NON_PRIV_FUNC) { netdev_warn(dev, "LED test not supported for non " "privilege function\n");