From: Russell King Date: Fri, 8 Feb 2019 15:35:49 +0000 (+0000) Subject: net: marvell: mvpp2: only reprogram what is necessary on mac_config X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=d14e078f23cc9711acd299c91e77076c3f1ddddb;p=openwrt%2Fstaging%2Fblogic.git net: marvell: mvpp2: only reprogram what is necessary on mac_config mac_config() can be called at any point, and the expected behaviour from MAC drivers is to only reprogram when necessary - and certainly avoid taking the link down on every call. Unfortunately, mvpp2 does exactly that - it takes the link down, and reprograms everything, and then releases the forced-link down. This is bad, it can cause the link to bounce: - SFP detects signal, disables LOS indication. - SFP code calls into phylink, calling phylink_sfp_link_up() which triggers a resolve. - phylink_resolve() calls phylink_get_mac_state() and finds the MAC reporting link up. - phylink wants to configure the pause mode on the MAC, so calls phylink_mac_config() - mvpp2 takes the link down temporarily, generating a MAC link down event followed by another MAC link event. - phylink calls mac_link_up() and then processes the MAC link down event. - phylink_resolve() gets called again, registers the link down, and calls mach_link_down() before re-running itself. - phylink_resolve() starts again at step 3 above. This sequence repeats. GMAC versions prior to mvpp2 do not require the link to be taken down except when certain link properties (eg, switching between SGMII and 1000base-X mode, or enabling/disabling in-band negotiation) are changed. Implement this for mvpp2. Tested-by: Sven Auhagen Signed-off-by: Russell King Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c index 7a60456d91be..133a6d4f94a1 100644 --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c @@ -4534,29 +4534,21 @@ static void mvpp2_xlg_config(struct mvpp2_port *port, unsigned int mode, static void mvpp2_gmac_config(struct mvpp2_port *port, unsigned int mode, const struct phylink_link_state *state) { - u32 an, ctrl0, ctrl2, ctrl4; - u32 old_ctrl2; + u32 old_an, an; + u32 old_ctrl0, ctrl0; + u32 old_ctrl2, ctrl2; + u32 old_ctrl4, ctrl4; - an = readl(port->base + MVPP2_GMAC_AUTONEG_CONFIG); - ctrl0 = readl(port->base + MVPP2_GMAC_CTRL_0_REG); - ctrl2 = readl(port->base + MVPP2_GMAC_CTRL_2_REG); - ctrl4 = readl(port->base + MVPP22_GMAC_CTRL_4_REG); - - old_ctrl2 = ctrl2; - - /* Force link down */ - an &= ~MVPP2_GMAC_FORCE_LINK_PASS; - an |= MVPP2_GMAC_FORCE_LINK_DOWN; - writel(an, port->base + MVPP2_GMAC_AUTONEG_CONFIG); - - /* Set the GMAC in a reset state */ - ctrl2 |= MVPP2_GMAC_PORT_RESET_MASK; - writel(ctrl2, port->base + MVPP2_GMAC_CTRL_2_REG); + old_an = an = readl(port->base + MVPP2_GMAC_AUTONEG_CONFIG); + old_ctrl0 = ctrl0 = readl(port->base + MVPP2_GMAC_CTRL_0_REG); + old_ctrl2 = ctrl2 = readl(port->base + MVPP2_GMAC_CTRL_2_REG); + old_ctrl4 = ctrl4 = readl(port->base + MVPP22_GMAC_CTRL_4_REG); an &= ~(MVPP2_GMAC_CONFIG_MII_SPEED | MVPP2_GMAC_CONFIG_GMII_SPEED | MVPP2_GMAC_AN_SPEED_EN | MVPP2_GMAC_FC_ADV_EN | MVPP2_GMAC_FC_ADV_ASM_EN | MVPP2_GMAC_FLOW_CTRL_AUTONEG | - MVPP2_GMAC_CONFIG_FULL_DUPLEX | MVPP2_GMAC_AN_DUPLEX_EN); + MVPP2_GMAC_CONFIG_FULL_DUPLEX | MVPP2_GMAC_AN_DUPLEX_EN | + MVPP2_GMAC_IN_BAND_AUTONEG | MVPP2_GMAC_IN_BAND_AUTONEG_BYPASS); ctrl0 &= ~MVPP2_GMAC_PORT_TYPE_MASK; ctrl2 &= ~(MVPP2_GMAC_INBAND_AN_MASK | MVPP2_GMAC_PORT_RESET_MASK | MVPP2_GMAC_PCS_ENABLE_MASK); @@ -4623,7 +4615,8 @@ static void mvpp2_gmac_config(struct mvpp2_port *port, unsigned int mode, */ ctrl0 |= MVPP2_GMAC_PORT_TYPE_MASK; an &= ~(MVPP2_GMAC_FORCE_LINK_DOWN | MVPP2_GMAC_FORCE_LINK_PASS); - an |= MVPP2_GMAC_CONFIG_GMII_SPEED | + an |= MVPP2_GMAC_IN_BAND_AUTONEG | + MVPP2_GMAC_CONFIG_GMII_SPEED | MVPP2_GMAC_CONFIG_FULL_DUPLEX; if (state->pause & MLO_PAUSE_AN && state->an_enabled) { @@ -4636,10 +4629,29 @@ static void mvpp2_gmac_config(struct mvpp2_port *port, unsigned int mode, } } - writel(ctrl0, port->base + MVPP2_GMAC_CTRL_0_REG); - writel(ctrl2, port->base + MVPP2_GMAC_CTRL_2_REG); - writel(ctrl4, port->base + MVPP22_GMAC_CTRL_4_REG); - writel(an, port->base + MVPP2_GMAC_AUTONEG_CONFIG); + if ((old_ctrl0 ^ ctrl0) & MVPP2_GMAC_PORT_TYPE_MASK || + (old_ctrl2 ^ ctrl2) & MVPP2_GMAC_INBAND_AN_MASK || + (old_an ^ an) & MVPP2_GMAC_IN_BAND_AUTONEG) { + /* Force link down */ + old_an &= ~MVPP2_GMAC_FORCE_LINK_PASS; + old_an |= MVPP2_GMAC_FORCE_LINK_DOWN; + writel(old_an, port->base + MVPP2_GMAC_AUTONEG_CONFIG); + + /* Set the GMAC in a reset state - do this in a way that + * ensures we clear it below. + */ + old_ctrl2 |= MVPP2_GMAC_PORT_RESET_MASK; + writel(old_ctrl2, port->base + MVPP2_GMAC_CTRL_2_REG); + } + + if (old_ctrl0 != ctrl0) + writel(ctrl0, port->base + MVPP2_GMAC_CTRL_0_REG); + if (old_ctrl2 != ctrl2) + writel(ctrl2, port->base + MVPP2_GMAC_CTRL_2_REG); + if (old_ctrl4 != ctrl4) + writel(ctrl4, port->base + MVPP22_GMAC_CTRL_4_REG); + if (old_an != an) + writel(an, port->base + MVPP2_GMAC_AUTONEG_CONFIG); if (old_ctrl2 & MVPP2_GMAC_PORT_RESET_MASK) { while (readl(port->base + MVPP2_GMAC_CTRL_2_REG) &